- Nov 13, 2019
-
-
Jason Yan authored
After we have the basic support of relocate the kernel in some appropriate place, we can start to randomize the offset now. Entropy is derived from the banner and timer, which will change every build and boot. This not so much safe so additionally the bootloader may pass entropy via the /chosen/kaslr-seed node in device tree. We will use the first 512M of the low memory to randomize the kernel image. The memory will be split in 64M zones. We will use the lower 8 bit of the entropy to decide the index of the 64M zone. Then we chose a 16K aligned offset inside the 64M zone to put the kernel in. We also check if we will overlap with some areas like the dtb area, the initrd area or the crashkernel area. If we cannot find a proper area, kaslr will be disabled and boot from the original kernel. Some pieces of code are derived from arch/x86/boot/compressed/kaslr.c or arch/arm64/kernel/kaslr.c such as rotate_xor(). Credit goes to Kees and Ard. Signed-off-by:
Jason Yan <yanaijie@huawei.com> Reviewed-by:
Diana Craciun <diana.craciun@nxp.com> Tested-by:
Diana Craciun <diana.craciun@nxp.com> Reviewed-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Scott Wood <oss@buserror.net> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Jason Yan authored
This patch add support to boot kernel from places other than KERNELBASE. Since CONFIG_RELOCATABLE has already supported, what we need to do is map or copy kernel to a proper place and relocate. Freescale Book-E parts expect lowmem to be mapped by fixed TLB entries(TLB1). The TLB1 entries are not suitable to map the kernel directly in a randomized region, so we chose to copy the kernel to a proper place and restart to relocate. The offset of the kernel was not randomized yet(a fixed 64M is set). We will randomize it in the next patch. Signed-off-by:
Jason Yan <yanaijie@huawei.com> Tested-by:
Diana Craciun <diana.craciun@nxp.com> Reviewed-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Scott Wood <oss@buserror.net> [mpe: Use PTRRELOC() in early_init()] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Jason Yan authored
Add a new helper reloc_kernel_entry() to jump back to the start of the new kernel. After we put the new kernel in a randomized place we can use this new helper to enter the kernel and begin to relocate again. Signed-off-by:
Jason Yan <yanaijie@huawei.com> Reviewed-by:
Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by:
Diana Craciun <diana.craciun@nxp.com> Tested-by:
Diana Craciun <diana.craciun@nxp.com> Signed-off-by:
Scott Wood <oss@buserror.net> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Jason Yan authored
Add a new helper create_kaslr_tlb_entry() to create a tlb entry by the virtual and physical address. This is a preparation to support boot kernel at a randomized address. Signed-off-by:
Jason Yan <yanaijie@huawei.com> Reviewed-by:
Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by:
Diana Craciun <diana.craciun@nxp.com> Tested-by:
Diana Craciun <diana.craciun@nxp.com> Signed-off-by:
Scott Wood <oss@buserror.net> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Jason Yan authored
Now the kernel base is a fixed value - KERNELBASE. To support KASLR, we need a variable to store the kernel base. Signed-off-by:
Jason Yan <yanaijie@huawei.com> Reviewed-by:
Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by:
Diana Craciun <diana.craciun@nxp.com> Tested-by:
Diana Craciun <diana.craciun@nxp.com> Signed-off-by:
Scott Wood <oss@buserror.net> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Jason Yan authored
These two variables are both defined in init_32.c and init_64.c. Move them to init-common.c and make them __ro_after_init. Signed-off-by:
Jason Yan <yanaijie@huawei.com> Reviewed-by:
Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by:
Diana Craciun <diana.craciun@nxp.com> Tested-by:
Diana Craciun <diana.craciun@nxp.com> Signed-off-by:
Scott Wood <oss@buserror.net> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Jason Yan authored
M_IF_NEEDED is defined too many times. Move it to a common place and rename it to MAS2_M_IF_NEEDED which is much readable. Signed-off-by:
Jason Yan <yanaijie@huawei.com> Reviewed-by:
Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by:
Diana Craciun <diana.craciun@nxp.com> Tested-by:
Diana Craciun <diana.craciun@nxp.com> Signed-off-by:
Scott Wood <oss@buserror.net> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
- Oct 07, 2019
-
-
Linus Torvalds authored
-
Linus Torvalds authored
In commit 4ed28639 ("fs, elf: drop MAP_FIXED usage from elf_map") we changed elf to use MAP_FIXED_NOREPLACE instead of MAP_FIXED for the executable mappings. Then, people reported that it broke some binaries that had overlapping segments from the same file, and commit ad55eac7 ("elf: enforce MAP_FIXED on overlaying elf segments") re-instated MAP_FIXED for some overlaying elf segment cases. But only some - despite the summary line of that commit, it only did it when it also does a temporary brk vma for one obvious overlapping case. Now Russell King reports another overlapping case with old 32-bit x86 binaries, which doesn't trigger that limited case. End result: we had better just drop MAP_FIXED_NOREPLACE entirely, and go back to MAP_FIXED. Yes, it's a sign of old binaries generated with old tool-chains, but we do pride ourselves on not breaking existing setups. This still leaves MAP_FIXED_NOREPLACE in place for the load_elf_interp() and the old load_elf_library() use-cases, because nobody has reported breakage for those. Yet. Note that in all the cases seen so far, the overlapping elf sections seem to be just re-mapping of the same executable with different section attributes. We could possibly introduce a new MAP_FIXED_NOFILECHANGE flag or similar, which acts like NOREPLACE, but allows just remapping the same executable file using different protection flags. It's not clear that would make a huge difference to anything, but if people really hate that "elf remaps over previous maps" behavior, maybe at least a more limited form of remapping would alleviate some concerns. Alternatively, we should take a look at our elf_map() logic to see if we end up not mapping things properly the first time. In the meantime, this is the minimal "don't do that then" patch while people hopefully think about it more. Reported-by:
Russell King <linux@armlinux.org.uk> Fixes: 4ed28639 ("fs, elf: drop MAP_FIXED usage from elf_map") Fixes: ad55eac7 ("elf: enforce MAP_FIXED on overlaying elf segments") Cc: Michal Hocko <mhocko@suse.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping regression fix from Christoph Hellwig: "Revert an incorret hunk from a patch that caused problems on various arm boards (Andrey Smirnov)" * tag 'dma-mapping-5.4-1' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: fix false positive warnings in dma_common_free_remap()
-
- Oct 06, 2019
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "A few fixes this time around: - Fixup of some clock specifications for DRA7 (device-tree fix) - Removal of some dead/legacy CPU OPP/PM code for OMAP that throws warnings at boot - A few more minor fixups for OMAPs, most around display - Enable STM32 QSPI as =y since their rootfs sometimes comes from there - Switch CONFIG_REMOTEPROC to =y since it went from tristate to bool - Fix of thermal zone definition for ux500 (5.4 regression)" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: multi_v7_defconfig: Fix SPI_STM32_QSPI support ARM: dts: ux500: Fix up the CPU thermal zone arm64/ARM: configs: Change CONFIG_REMOTEPROC from m to y ARM: dts: am4372: Set memory bandwidth limit for DISPC ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage() ARM: OMAP2+: Add missing LCDC midlemode for am335x ARM: OMAP2+: Fix missing reset done flag for am3 and am43 ARM: dts: Fix gpio0 flags for am335x-icev2 ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules ARM: omap2plus_defconfig: Enable DRM_TI_TFP410 DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again ARM: dts: Fix wrong clocks for dra7 mcasp clk: ti: dra7: Fix mcasp8 clock bits
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - remove unneeded ar-option and KBUILD_ARFLAGS - remove long-deprecated SUBDIRS - fix modpost to suppress false-positive warnings for UML builds - fix namespace.pl to handle relative paths to ${objtree}, ${srctree} - make setlocalversion work for /bin/sh - make header archive reproducible - fix some Makefiles and documents * tag 'kbuild-fixes-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kheaders: make headers archive reproducible kbuild: update compile-test header list for v5.4-rc2 kbuild: two minor updates for Documentation/kbuild/modules.rst scripts/setlocalversion: clear local variable to make it work for sh namespace: fix namespace.pl script to support relative paths video/logo: do not generate unneeded logo C files video/logo: remove unneeded *.o pattern from clean-files integrity: remove pointless subdir-$(CONFIG_...) integrity: remove unneeded, broken attempt to add -fshort-wchar modpost: fix static EXPORT_SYMBOL warnings for UML build kbuild: correct formatting of header in kbuild module docs kbuild: remove SUBDIRS support kbuild: remove ar-option and KBUILD_ARFLAGS
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Twelve patches mostly small but obvious fixes or cosmetic but small updates" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: Fix Nport ID display value scsi: qla2xxx: Fix N2N link up fail scsi: qla2xxx: Fix N2N link reset scsi: qla2xxx: Optimize NPIV tear down process scsi: qla2xxx: Fix stale mem access on driver unload scsi: qla2xxx: Fix unbound sleep in fcport delete path. scsi: qla2xxx: Silence fwdump template message scsi: hisi_sas: Make three functions static scsi: megaraid: disable device when probe failed after enabled device scsi: storvsc: setup 1:1 mapping between hardware queue and CPU queue scsi: qedf: Remove always false 'tmp_prio < 0' statement scsi: ufs: skip shutdown if hba is not powered scsi: bnx2fc: Handle scope bits when array returns BUSY or TSF
-
Linus Torvalds authored
This makes getdents() and getdents64() do sanity checking on the pathname that it gives to user space. And to mitigate the performance impact of that, it first cleans up the way it does the user copying, so that the code avoids doing the SMAP/PAN updates between each part of the dirent structure write. I really wanted to do this during the merge window, but didn't have time. The conversion of filldir to unsafe_put_user() is something I've had around for years now in a private branch, but the extra pathname checking finally made me clean it up to the point where it is mergable. It's worth noting that the filename validity checking really should be a bit smarter: it would be much better to delay the error reporting until the end of the readdir, so that non-corrupted filenames are still returned. But that involves bigger changes, so let's see if anybody actually hits the corrupt directory entry case before worrying about it further. * branch 'readdir': Make filldir[64]() verify the directory entry filename is valid Convert filldir[64]() from __put_user() to unsafe_put_user()
-
Linus Torvalds authored
This has been discussed several times, and now filesystem people are talking about doing it individually at the filesystem layer, so head that off at the pass and just do it in getdents{64}(). This is partially based on a patch by Jann Horn, but checks for NUL bytes as well, and somewhat simplified. There's also commentary about how it might be better if invalid names due to filesystem corruption don't cause an immediate failure, but only an error at the end of the readdir(), so that people can still see the filenames that are ok. There's also been discussion about just how much POSIX strictly speaking requires this since it's about filesystem corruption. It's really more "protect user space from bad behavior" as pointed out by Jann. But since Eric Biederman looked up the POSIX wording, here it is for context: "From readdir: The readdir() function shall return a pointer to a structure representing the directory entry at the current position in the directory stream specified by the argument dirp, and position the directory stream at the next entry. It shall return a null pointer upon reaching the end of the directory stream. The structure dirent defined in the <dirent.h> header describes a directory entry. From definitions: 3.129 Directory Entry (or Link) An object that associates a filename with a file. Several directory entries can associate names with the same file. ... 3.169 Filename A name consisting of 1 to {NAME_MAX} bytes used to name a file. The characters composing the name may be selected from the set of all character values excluding the slash character and the null byte. The filenames dot and dot-dot have special meaning. A filename is sometimes referred to as a 'pathname component'." Note that I didn't bother adding the checks to any legacy interfaces that nobody uses. Also note that if this ends up being noticeable as a performance regression, we can fix that to do a much more optimized model that checks for both NUL and '/' at the same time one word at a time. We haven't really tended to optimize 'memchr()', and it only checks for one pattern at a time anyway, and we really _should_ check for NUL too (but see the comment about "soft errors" in the code about why it currently only checks for '/') See the CONFIG_DCACHE_WORD_ACCESS case of hash_name() for how the name lookup code looks for pathname terminating characters in parallel. Link: https://lore.kernel.org/lkml/20190118161440.220134-2-jannh@google.com/ Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jann Horn <jannh@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
We really should avoid the "__{get,put}_user()" functions entirely, because they can easily be mis-used and the original intent of being used for simple direct user accesses no longer holds in a post-SMAP/PAN world. Manually optimizing away the user access range check makes no sense any more, when the range check is generally much cheaper than the "enable user accesses" code that the __{get,put}_user() functions still need. So instead of __put_user(), use the unsafe_put_user() interface with user_access_{begin,end}() that really does generate better code these days, and which is generally a nicer interface. Under some loads, the multiple user writes that filldir() does are actually quite noticeable. This also makes the dirent name copy use unsafe_put_user() with a couple of macros. We do not want to make function calls with SMAP/PAN disabled, and the code this generates is quite good when the architecture uses "asm goto" for unsafe_put_user() like x86 does. Note that this doesn't bother with the legacy cases. Nobody should use them anyway, so performance doesn't really matter there. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- Oct 05, 2019
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix ieeeu02154 atusb driver use-after-free, from Johan Hovold. 2) Need to validate TCA_CBQ_WRROPT netlink attributes, from Eric Dumazet. 3) txq null deref in mac80211, from Miaoqing Pan. 4) ionic driver needs to select NET_DEVLINK, from Arnd Bergmann. 5) Need to disable bh during nft_connlimit GC, from Pablo Neira Ayuso. 6) Avoid division by zero in taprio scheduler, from Vladimir Oltean. 7) Various xgmac fixes in stmmac driver from Jose Abreu. 8) Avoid 64-bit division in mlx5 leading to link errors on 32-bit from Michal Kubecek. 9) Fix bad VLAN check in rtl8366 DSA driver, from Linus Walleij. 10) Fix sleep while atomic in sja1105, from Vladimir Oltean. 11) Suspend/resume deadlock in stmmac, from Thierry Reding. 12) Various UDP GSO fixes from Josh Hunt. 13) Fix slab out of bounds access in tcp_zerocopy_receive(), from Eric Dumazet. 14) Fix OOPS in __ipv6_ifa_notify(), from David Ahern. 15) Memory leak in NFC's llcp_sock_bind, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits) selftests/net: add nettest to .gitignore net: qlogic: Fix memory leak in ql_alloc_large_buffers nfc: fix memory leak in llcp_sock_bind() sch_dsmark: fix potential NULL deref in dsmark_init() net: phy: at803x: use operating parameters from PHY-specific status net: phy: extract pause mode net: phy: extract link partner advertisement reading net: phy: fix write to mii-ctrl1000 register ipv6: Handle missing host route in __ipv6_ifa_notify net: phy: allow for reset line to be tied to a sleepy GPIO controller net: ipv4: avoid mixed n_redirects and rate_tokens usage r8152: Set macpassthru in reset_resume callback cxgb4:Fix out-of-bounds MSI-X info array access Revert "ipv6: Handle race in addrconf_dad_work" net: make sock_prot_memory_pressure() return "const char *" rxrpc: Fix rxrpc_recvmsg tracepoint qmi_wwan: add support for Cinterion CLS8 devices tcp: fix slab-out-of-bounds in tcp_zerocopy_receive() lib: textsearch: fix escapes in example code udp: only do GSO if # of segs > 1 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Vasily Gorbik: - defconfig updates - Fix build errors with CC_OPTIMIZE_FOR_SIZE due to usage of "i" constraint for function arguments. Two kvm changes acked-by Christian Borntraeger. - Fix -Wunused-but-set-variable warnings in mm code. - Avoid a constant misuse in qdio. - Handle a case when cpumf is temporarily unavailable. * tag 's390-5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: KVM: s390: mark __insn32_query() as __always_inline KVM: s390: fix __insn32_query() inline assembly s390: update defconfigs s390/pci: mark function(s) __always_inline s390/mm: mark function(s) __always_inline s390/jump_label: mark function(s) __always_inline s390/cpu_mf: mark function(s) __always_inline s390/atomic,bitops: mark function(s) __always_inline s390/mm: fix -Wunused-but-set-variable warnings s390: mark __cpacf_query() as __always_inline s390/qdio: clarify size of the QIB parm area s390/cpumf: Fix indentation in sampling device driver s390/cpumsf: Check for CPU Measurement sampling s390/cpumf: Use consistant debug print format
-
Heiko Carstens authored
__insn32_query() will not compile if the compiler decides to not inline it, since it contains an inline assembly with an "i" constraint with variable contents. Acked-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com>
-
Heiko Carstens authored
The inline assembly constraints of __insn32_query() tell the compiler that only the first byte of "query" is being written to. Intended was probably that 32 bytes are written to. Fix and simplify the code and just use a "memory" clobber. Fixes: d6681397 ("KVM: s390: provide query function for instructions returning 32 byte") Cc: stable@vger.kernel.org # v5.2+ Acked-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com>
-
Andrey Smirnov authored
Commit 5cf45379 ("dma-mapping: introduce a dma_common_find_pages helper") changed invalid input check in dma_common_free_remap() from: if (!area || !area->flags != VM_DMA_COHERENT) to if (!area || !area->flags != VM_DMA_COHERENT || !area->pages) which seem to produce false positives for memory obtained via dma_common_contiguous_remap() This triggers the following warning message when doing "reboot" on ZII VF610 Dev Board Rev B: WARNING: CPU: 0 PID: 1 at kernel/dma/remap.c:112 dma_common_free_remap+0x88/0x8c trying to free invalid coherent area: 9ef82980 Modules linked in: CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.3.0-rc6-next-20190820 #119 Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) Backtrace: [<8010d1ec>] (dump_backtrace) from [<8010d588>] (show_stack+0x20/0x24) r7:8015ed78 r6:00000009 r5:00000000 r4:9f4d9b14 [<8010d568>] (show_stack) from [<8077e3f0>] (dump_stack+0x24/0x28) [<8077e3cc>] (dump_stack) from [<801197a0>] (__warn.part.3+0xcc/0xe4) [<801196d4>] (__warn.part.3) from [<80119830>] (warn_slowpath_fmt+0x78/0x94) r6:00000070 r5:808e540c r4:81c03048 [<801197bc>] (warn_slowpath_fmt) from [<8015ed78>] (dma_common_free_remap+0x88/0x8c) r3:9ef82980 r2:808e53e0 r7:00001000 r6:a0b1e000 r5:a0b1e000 r4:00001000 [<8015ecf0>] (dma_common_free_remap) from [<8010fa9c>] (remap_allocator_free+0x60/0x68) r5:81c03048 r4:9f4d9b78 [<8010fa3c>] (remap_allocator_free) from [<801100d0>] (__arm_dma_free.constprop.3+0xf8/0x148) r5:81c03048 r4:9ef82900 [<8010ffd8>] (__arm_dma_free.constprop.3) from [<80110144>] (arm_dma_free+0x24/0x2c) r5:9f563410 r4:80110120 [<80110120>] (arm_dma_free) from [<8015d80c>] (dma_free_attrs+0xa0/0xdc) [<8015d76c>] (dma_free_attrs) from [<8020f3e4>] (dma_pool_destroy+0xc0/0x154) r8:9efa8860 r7:808f02f0 r6:808f02d0 r5:9ef82880 r4:9ef82780 [<8020f324>] (dma_pool_destroy) from [<805525d0>] (ehci_mem_cleanup+0x6c/0x150) r7:9f563410 r6:9efa8810 r5:00000000 r4:9efd0148 [<80552564>] (ehci_mem_cleanup) from [<80558e0c>] (ehci_stop+0xac/0xc0) r5:9efd0148 r4:9efd0000 [<80558d60>] (ehci_stop) from [<8053c4bc>] (usb_remove_hcd+0xf4/0x1b0) r7:9f563410 r6:9efd0074 r5:81c03048 r4:9efd0000 [<8053c3c8>] (usb_remove_hcd) from [<8056361c>] (host_stop+0x48/0xb8) r7:9f563410 r6:9efd0000 r5:9f5f4040 r4:9f5f5040 [<805635d4>] (host_stop) from [<80563d0c>] (ci_hdrc_host_destroy+0x34/0x38) r7:9f563410 r6:9f5f5040 r5:9efa8800 r4:9f5f4040 [<80563cd8>] (ci_hdrc_host_destroy) from [<8055ef18>] (ci_hdrc_remove+0x50/0x10c) [<8055eec8>] (ci_hdrc_remove) from [<804a2ed8>] (platform_drv_remove+0x34/0x4c) r7:9f563410 r6:81c4f99c r5:9efa8810 r4:9efa8810 [<804a2ea4>] (platform_drv_remove) from [<804a18a8>] (device_release_driver_internal+0xec/0x19c) r5:00000000 r4:9efa8810 [<804a17bc>] (device_release_driver_internal) from [<804a1978>] (device_release_driver+0x20/0x24) r7:9f563410 r6:81c41ed0 r5:9efa8810 r4:9f4a1dac [<804a1958>] (device_release_driver) from [<804a01b8>] (bus_remove_device+0xdc/0x108) [<804a00dc>] (bus_remove_device) from [<8049c204>] (device_del+0x150/0x36c) r7:9f563410 r6:81c03048 r5:9efa8854 r4:9efa8810 [<8049c0b4>] (device_del) from [<804a3368>] (platform_device_del.part.2+0x20/0x84) r10:9f563414 r9:809177e0 r8:81cb07dc r7:81c78320 r6:9f563454 r5:9efa8800 r4:9efa8800 [<804a3348>] (platform_device_del.part.2) from [<804a3420>] (platform_device_unregister+0x28/0x34) r5:9f563400 r4:9efa8800 [<804a33f8>] (platform_device_unregister) from [<8055dce0>] (ci_hdrc_remove_device+0x1c/0x30) r5:9f563400 r4:00000001 [<8055dcc4>] (ci_hdrc_remove_device) from [<805652ac>] (ci_hdrc_imx_remove+0x38/0x118) r7:81c78320 r6:9f563454 r5:9f563410 r4:9f541010 [<8056538c>] (ci_hdrc_imx_shutdown) from [<804a2970>] (platform_drv_shutdown+0x2c/0x30) [<804a2944>] (platform_drv_shutdown) from [<8049e4fc>] (device_shutdown+0x158/0x1f0) [<8049e3a4>] (device_shutdown) from [<8013ac80>] (kernel_restart_prepare+0x44/0x48) r10:00000058 r9:9f4d8000 r8:fee1dead r7:379ce700 r6:81c0b280 r5:81c03048 r4:00000000 [<8013ac3c>] (kernel_restart_prepare) from [<8013ad14>] (kernel_restart+0x1c/0x60) [<8013acf8>] (kernel_restart) from [<8013af84>] (__do_sys_reboot+0xe0/0x1d8) r5:81c03048 r4:00000000 [<8013aea4>] (__do_sys_reboot) from [<8013b0ec>] (sys_reboot+0x18/0x1c) r8:80101204 r7:00000058 r6:00000000 r5:00000000 r4:00000000 [<8013b0d4>] (sys_reboot) from [<80101000>] (ret_fast_syscall+0x0/0x54) Exception stack(0x9f4d9fa8 to 0x9f4d9ff0) 9fa0: 00000000 00000000 fee1dead 28121969 01234567 379ce700 9fc0: 00000000 00000000 00000000 00000058 00000000 00000000 00000000 00016d04 9fe0: 00028e0c 7ec87c64 000135ec 76c1f410 Restore original invalid input check in dma_common_free_remap() to avoid this problem. Fixes: 5cf45379 ("dma-mapping: introduce a dma_common_find_pages helper") Signed-off-by:
Andrey Smirnov <andrew.smirnov@gmail.com> [hch: just revert the offending hunk instead of creating a new helper] Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
Dmitry Goldin authored
In commit 43d8ce9d ("Provide in-kernel headers to make extending kernel easier") a new mechanism was introduced, for kernels >=5.2, which embeds the kernel headers in the kernel image or a module and exposes them in procfs for use by userland tools. The archive containing the header files has nondeterminism caused by header files metadata. This patch normalizes the metadata and utilizes KBUILD_BUILD_TIMESTAMP if provided and otherwise falls back to the default behaviour. In commit f7b101d3 ("kheaders: Move from proc to sysfs") it was modified to use sysfs and the script for generation of the archive was renamed to what is being patched. Signed-off-by:
Dmitry Goldin <dgoldin+lkml@protonmail.ch> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com>
-
Masahiro Yamada authored
Commit 6dc280eb ("coda: remove uapi/linux/coda_psdev.h") removed a header in question. Some more build errors were fixed. Add more headers into the test coverage. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com>
-
Masahiro Yamada authored
Capitalize the first word in the sentence. Use obj-m instead of obj-y. obj-y still works, but we have no built-in objects in external module builds. So, obj-m is better IMHO. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com>
-
Masahiro Yamada authored
Geert Uytterhoeven reports a strange side-effect of commit 858805b3 ("kbuild: add $(BASH) to run scripts with bash-extension"), which inserts the contents of a localversion file in the build directory twice. [Steps to Reproduce] $ echo bar > localversion $ mkdir build $ cd build/ $ echo foo > localversion $ make -s -f ../Makefile defconfig include/config/kernel.release $ cat include/config/kernel.release 5.4.0-rc1foofoobar This comes down to the behavior change of local variables. The 'man sh' on my Ubuntu machine, where sh is an alias to dash, explains as follows: When a variable is made local, it inherits the initial value and exported and readonly flags from the variable with the same name in the surrounding scope, if there is one. Otherwise, the variable is initially unset. [Test Code] foo () { local res echo "res: $res" } res=1 foo [Result] $ sh test.sh res: 1 $ bash test.sh res: So, scripts/setlocalversion correctly works only for bash in spite of its hashbang being #!/bin/sh. Nobody had noticed it before because CONFIG_SHELL was previously set to bash almost all the time. Now that CONFIG_SHELL is set to sh, we must write portable and correct code. I gave the Fixes tag to the commit that uncovered the issue. Clear the variable 'res' in collect_files() to make it work for sh (and it also works on distributions where sh is an alias to bash). Fixes: 858805b3 ("kbuild: add $(BASH) to run scripts with bash-extension") Reported-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by:
Geert Uytterhoeven <geert+renesas@glider.be>
-
Jacob Keller authored
The namespace.pl script does not work properly if objtree is not set to an absolute path. The do_nm function is run from within the find function, which changes directories. Because of this, appending objtree, $File::Find::dir, and $source, will return a path which is not valid from the current directory. This used to work when objtree was set to an absolute path when using "make namespacecheck". It appears to have not worked when calling ./scripts/namespace.pl directly. This behavior was changed in 7e1c0477 ("kbuild: Use relative path for $(objtree)", 2014-05-14) Rather than fixing the Makefile to set objtree to an absolute path, just fix namespace.pl to work when srctree and objtree are relative. Also fix the script to use an absolute path for these by default. Use the File::Spec module for this purpose. It's been part of perl 5 since 5.005. The curdir() function is used to get the current directory when the objtree and srctree aren't set in the environment. rel2abs() is used to convert possibly relative objtree and srctree environment variables to absolute paths. Finally, the catfile() function is used instead of string appending paths together, since this is more robust when joining paths together. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Tested-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com>
-
Masahiro Yamada authored
Currently, all the logo C files are generated irrespective of the CONFIG options. Adding them to extra-y is wrong. What we need to do here is to add them to 'targets' so that if_changed works properly. Files listed in 'targets' are cleaned, so clean-files is unneeded. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com>
-
Masahiro Yamada authored
The pattern *.o is cleaned up globally by the top Makefile. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com>
-
Masahiro Yamada authored
The ima/ and evm/ sub-directories contain built-in objects, so obj-$(CONFIG_...) is the correct way to descend into them. subdir-$(CONFIG_...) is redundant. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com>
-
Masahiro Yamada authored
I guess commit 15ea0e1e ("efi: Import certificates from UEFI Secure Boot") attempted to add -fshort-wchar for building load_uefi.o, but it has never worked as intended. load_uefi.o is created in the platform_certs/ sub-directory. If you really want to add -fshort-wchar, the correct code is: $(obj)/platform_certs/load_uefi.o: KBUILD_CFLAGS += -fshort-wchar But, you do not need to fix it. Commit 8c97023c ("Kbuild: use -fshort-wchar globally") had already added -fshort-wchar globally. This code was unneeded in the first place. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com>
-
Jakub Kicinski authored
nettest is missing from gitignore. Fixes: acda655f ("selftests: Add nettest") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Navid Emamdoost authored
In ql_alloc_large_buffers, a new skb is allocated via netdev_alloc_skb. This skb should be released if pci_dma_mapping_error fails. Fixes: 0f8ab89e ("qla3xxx: Check return code from pci_map_single() in ql_release_to_lrg_buf_free_list(), ql_populate_free_queue(), ql_alloc_large_buffers(), and ql3xxx_send()") Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
sysbot reported a memory leak after a bind() has failed. While we are at it, abort the operation if kmemdup() has failed. BUG: memory leak unreferenced object 0xffff888105d83ec0 (size 32): comm "syz-executor067", pid 7207, jiffies 4294956228 (age 19.430s) hex dump (first 32 bytes): 00 69 6c 65 20 72 65 61 64 00 6e 65 74 3a 5b 34 .ile read.net:[4 30 32 36 35 33 33 30 39 37 5d 00 00 00 00 00 00 026533097]...... backtrace: [<0000000036bac473>] kmemleak_alloc_recursive /./include/linux/kmemleak.h:43 [inline] [<0000000036bac473>] slab_post_alloc_hook /mm/slab.h:522 [inline] [<0000000036bac473>] slab_alloc /mm/slab.c:3319 [inline] [<0000000036bac473>] __do_kmalloc /mm/slab.c:3653 [inline] [<0000000036bac473>] __kmalloc_track_caller+0x169/0x2d0 /mm/slab.c:3670 [<000000000cd39d07>] kmemdup+0x27/0x60 /mm/util.c:120 [<000000008e57e5fc>] kmemdup /./include/linux/string.h:432 [inline] [<000000008e57e5fc>] llcp_sock_bind+0x1b3/0x230 /net/nfc/llcp_sock.c:107 [<000000009cb0b5d3>] __sys_bind+0x11c/0x140 /net/socket.c:1647 [<00000000492c3bbc>] __do_sys_bind /net/socket.c:1658 [inline] [<00000000492c3bbc>] __se_sys_bind /net/socket.c:1656 [inline] [<00000000492c3bbc>] __x64_sys_bind+0x1e/0x30 /net/socket.c:1656 [<0000000008704b2a>] do_syscall_64+0x76/0x1a0 /arch/x86/entry/common.c:296 [<000000009f4c57a4>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 30cc4587 ("NFC: Move LLCP code to the NFC top level diirectory") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Make sure TCA_DSMARK_INDICES was provided by the user. syzbot reported : kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 8799 Comm: syz-executor235 Not tainted 5.3.0+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:nla_get_u16 include/net/netlink.h:1501 [inline] RIP: 0010:dsmark_init net/sched/sch_dsmark.c:364 [inline] RIP: 0010:dsmark_init+0x193/0x640 net/sched/sch_dsmark.c:339 Code: 85 db 58 0f 88 7d 03 00 00 e8 e9 1a ac fb 48 8b 9d 70 ff ff ff 48 b8 00 00 00 00 00 fc ff df 48 8d 7b 04 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 01 38 d0 7c 08 84 d2 0f 85 ca RSP: 0018:ffff88809426f3b8 EFLAGS: 00010247 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff85c6eb09 RDX: 0000000000000000 RSI: ffffffff85c6eb17 RDI: 0000000000000004 RBP: ffff88809426f4b0 R08: ffff88808c4085c0 R09: ffffed1015d26159 R10: ffffed1015d26158 R11: ffff8880ae930ac7 R12: ffff8880a7e96940 R13: dffffc0000000000 R14: ffff88809426f8c0 R15: 0000000000000000 FS: 0000000001292880(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000080 CR3: 000000008ca1b000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: qdisc_create+0x4ee/0x1210 net/sched/sch_api.c:1237 tc_modify_qdisc+0x524/0x1c50 net/sched/sch_api.c:1653 rtnetlink_rcv_msg+0x463/0xb00 net/core/rtnetlink.c:5223 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5241 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0x531/0x710 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x8a5/0xd60 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:657 ___sys_sendmsg+0x803/0x920 net/socket.c:2311 __sys_sendmsg+0x105/0x1d0 net/socket.c:2356 __do_sys_sendmsg net/socket.c:2365 [inline] __se_sys_sendmsg net/socket.c:2363 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2363 do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x440369 Fixes: 758cc43c ("[PKT_SCHED]: Fix dsmark to apply changes consistent") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Russell King says: ==================== Fix regression with AR8035 speed downgrade The following series attempts to address an issue spotted by tinywrkb with the AR8035 on the Cubox-i2 in a situation where the PHY downgrades the negotiated link. This is version 2, not much has changed other than rebasing on the current net tree. Changes have happend to patch 2 due to conflicts, so I dropped Andrew's reviewed-by. Minor context changes to patch 4 which I don't consider important enough to warrant dropping the reviewed-by. Before commit 5502b218 ("net: phy: use phy_resolve_aneg_linkmode in genphy_read_status"), we would read not only the link partner's advertisement, but also our own advertisement from the PHY registers, and use both to derive the PHYs current link mode. This works when the AR8035 downgrades the speed, because it appears that the AR8035 clears link mode bits in the advertisement registers as part of the downgrade. Commentary: what is not yet known is whether the AR8035 restores the advertisement register when the link goes down to the previous state. However, since the above referenced commit, we no longer use the PHYs advertisement registers, instead converting the link partner's advertisement to the ethtool link mode array, and combine that with phylib's cached version of our advertisement - which is not updated on speed downgrade. This results in phylib disagreeing with the actual operating mode of the PHY. Commentary: I wonder how many more PHY drivers are broken by this commit, but have yet to be discovered. The obvious way to address this would be to disable the downgrade feature, and indeed this does fix the problem in tinywrkb's case - his link partner instead downgrades the speed by reducing its advertisement, resulting in phylib correctly evaluating a slower speed. However, it has a serious drawback - the gigabit control register (MII register 9) appears to become read only. It seems the only way to update the register is to re-enable the downgrade feature, reset the PHY, changing register 9, disable the downgrade feature, and reset the PHY again. This series attempts to address the problem using a different approach, similar to the approach taken with Marvell PHYs. The AR8031, AR8033 and AR8035 have a PHY-Specific Status register which reports the actual operating mode of the PHY - both speed and duplex. This register correctly reports the operating mode irrespective of whether autoneg is enabled or not. We use this register to fill in phylib's speed and duplex parameters. In detail: Patch 1 fixes a bug where writing to register 9 does not update phylib's advertisement mask in the same way that writing register 4 does; this looks like an omission from when gigabit PHY support came into being. Patch 2 seperates the generic phylib code which reads the link partners advertisement from the PHY, so that we can re-use this in the Atheros PHY driver. Patch 3 seperates the generic phylib pause mode; phylib provides no help for MAC drivers to ascertain the negotiated pause mode, it merely copies the link partner's pause mode bits into its own variables. Commentary: Both the aforementioned Atheros PHYs and Marvell PHYs provide the resolved pause modes in terms of whether we should transmit pause frames, or whether we should allow reception of pause frames. Surely the resolution of this should be in phylib? Patch 4 provides the Atheros PHY driver with a private "read_status" implementation that fills in phylib's speed and duplex settings depending on the PHY-Specific status register. This ensures that phylib and the MAC driver match the operating mode that the PHY has decided to use. Since the register also gives us MDIX status, we can trivially fill that status in as well. Note that, although the bits mentioned in this patch for this register match those in th Marvell PHY driver, and it is located at the same address, the meaning of other register bits varies between the PHYs. Therefore, I do not feel that it would be appropriate to make this some kind of generic function. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Russell King authored
Read the PHY-specific status register for the current operating mode (speed and duplex) of the PHY. This register reflects the actual mode that the PHY has resolved depending on either the advertisements of autoneg is enabled, or the forced mode if autoneg is disabled. This ensures that phylib's software state always tracks the hardware state. It seems both AR8033 (which uses the AR8031 ID) and AR8035 support this status register. AR8030 is not known at the present time. This patch depends on "net: phy: extract pause mode" and "net: phy: extract link partner advertisement reading". Reported-by:
tinywrkb <tinywrkb@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Tested-by:
tinywrkb <tinywrkb@gmail.com> Fixes: 5502b218 ("net: phy: use phy_resolve_aneg_linkmode in genphy_read_status") Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Russell King authored
Extract the update of phylib's software pause mode state from genphy_read_status(), so that we can re-use this functionality with PHYs that have alternative ways to read the negotiation results. Tested-by:
tinywrkb <tinywrkb@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Russell King authored
Move reading the link partner advertisement out of genphy_read_status() into its own separate function. This will allow re-use of this code by PHY drivers that are able to read the resolved status from the PHY. Tested-by:
tinywrkb <tinywrkb@gmail.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Russell King authored
When userspace writes to the MII_ADVERTISE register, we update phylib's advertising mask and trigger a renegotiation. However, writing to the MII_CTRL1000 register, which contains the gigabit advertisement, does neither. This can lead to phylib's copy of the advertisement becoming de-synced with the values in the PHY register set, which can result in incorrect negotiation resolution. Fixes: 5502b218 ("net: phy: use phy_resolve_aneg_linkmode in genphy_read_status") Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Ahern authored
Rajendra reported a kernel panic when a link was taken down: [ 6870.263084] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a8 [ 6870.271856] IP: [<ffffffff8efc5764>] __ipv6_ifa_notify+0x154/0x290 <snip> [ 6870.570501] Call Trace: [ 6870.573238] [<ffffffff8efc58c6>] ? ipv6_ifa_notify+0x26/0x40 [ 6870.579665] [<ffffffff8efc98ec>] ? addrconf_dad_completed+0x4c/0x2c0 [ 6870.586869] [<ffffffff8efe70c6>] ? ipv6_dev_mc_inc+0x196/0x260 [ 6870.593491] [<ffffffff8efc9c6a>] ? addrconf_dad_work+0x10a/0x430 [ 6870.600305] [<ffffffff8f01ade4>] ? __switch_to_asm+0x34/0x70 [ 6870.606732] [<ffffffff8ea93a7a>] ? process_one_work+0x18a/0x430 [ 6870.613449] [<ffffffff8ea93d6d>] ? worker_thread+0x4d/0x490 [ 6870.619778] [<ffffffff8ea93d20>] ? process_one_work+0x430/0x430 [ 6870.626495] [<ffffffff8ea99dd9>] ? kthread+0xd9/0xf0 [ 6870.632145] [<ffffffff8f01ade4>] ? __switch_to_asm+0x34/0x70 [ 6870.638573] [<ffffffff8ea99d00>] ? kthread_park+0x60/0x60 [ 6870.644707] [<ffffffff8f01ae77>] ? ret_from_fork+0x57/0x70 [ 6870.650936] Code: 31 c0 31 d2 41 b9 20 00 08 02 b9 09 00 00 0 addrconf_dad_work is kicked to be scheduled when a device is brought up. There is a race between addrcond_dad_work getting scheduled and taking the rtnl lock and a process taking the link down (under rtnl). The latter removes the host route from the inet6_addr as part of addrconf_ifdown which is run for NETDEV_DOWN. The former attempts to use the host route in __ipv6_ifa_notify. If the down event removes the host route due to the race to the rtnl, then the BUG listed above occurs. Since the DAD sequence can not be aborted, add a check for the missing host route in __ipv6_ifa_notify. The only way this should happen is due to the previously mentioned race. The host route is created when the address is added to an interface; it is only removed on a down event where the address is kept. Add a warning if the host route is missing AND the device is up; this is a situation that should never happen. Fixes: f1705ec1 ("net: ipv6: Make address flushing on ifdown optional") Reported-by:
Rajendra Dendukuri <rajendra.dendukuri@broadcom.com> Signed-off-by:
David Ahern <dsahern@gmail.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-