- Dec 15, 2018
-
-
Vitaly Kuznetsov authored
The upcoming KVM_GET_SUPPORTED_HV_CPUID ioctl will need to return Enlightened VMCS version in HYPERV_CPUID_NESTED_FEATURES.EAX when it was enabled. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Vitaly Kuznetsov authored
BIT(13) in HYPERV_CPUID_FEATURES.EBX is described as "ConfigureProfiler" in TLFS v4.0 but starting 5.0 it is replaced with 'Reserved'. As we don't currently us it in kernel it can just be dropped. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by:
Michael Kelley <mikelley@microsoft.com> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Vitaly Kuznetsov authored
hyperv-tlfs.h is a bit messy: CPUID feature bits are not always sorted, it's hard to get which CPUID they belong to, some items are duplicated (e.g. HV_X64_MSR_CRASH_CTL_NOTIFY/HV_CRASH_CTL_CRASH_NOTIFY). Do some housekeeping work. While on it, replace all (1 << X) with BIT(X) macro. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by:
Michael Kelley <mikelley@microsoft.com> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Vitaly Kuznetsov authored
The TLFS structures are used for hypervisor-guest communication and must exactly meet the specification. Compilers can add alignment padding to structures or reorder struct members for randomization and optimization, which would break the hypervisor ABI. Mark the structures as packed to prevent this. 'struct hv_vp_assist_page' and 'struct hv_enlightened_vmcs' need to be properly padded to support the change. Suggested-by:
Nadav Amit <nadav.amit@gmail.com> Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Nadav Amit <nadav.amit@gmail.com> Reviewed-by:
Michael Kelley <mikelley@microsoft.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Roman Kagan authored
The SynIC message delivery protocol allows the message originator to request, should the message slot be busy, to be notified when it's free. However, this is unnecessary and even undesirable for messages generated by SynIC timers in periodic mode: if the period is short enough compared to the time the guest spends in the timer interrupt handler, so the timer ticks start piling up, the excessive interactions due to this notification and retried message delivery only makes the things worse. [This was observed, in particular, with Windows L2 guests setting (temporarily) the periodic timer to 2 kHz, and spending hundreds of microseconds in the timer interrupt handler due to several L2->L1 exits; under some load in L0 this could exceed 500 us so the timer ticks started to pile up and the guest livelocked.] Relieve the situation somewhat by not retrying message delivery for periodic SynIC timers. This appears to remain within the "lazy" lost ticks policy for SynIC timers as implemented in KVM. Note that it doesn't solve the fundamental problem of livelocking the guest with a periodic timer whose period is smaller than the time needed to process a tick, but it makes it a bit less likely to be triggered. Signed-off-by:
Roman Kagan <rkagan@virtuozzo.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Roman Kagan authored
SynIC message delivery is somewhat overengineered: it pretends to follow the ordering rules when grabbing the message slot, using atomic operations and all that, but does it incorrectly and unnecessarily. The correct order would be to first set .msg_pending, then atomically replace .message_type if it was zero, and then clear .msg_pending if the previous step was successful. But this all is done in vcpu context so the whole update looks atomic to the guest (it's assumed to only access the message page from this cpu), and therefore can be done in whatever order is most convenient (and is also the reason why the incorrect order didn't trigger any bugs so far). While at this, also switch to kvm_vcpu_{read,write}_guest_page, and drop the no longer needed synic_clear_sint_msg_pending. Signed-off-by:
Roman Kagan <rkagan@virtuozzo.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Peng Hao authored
In the previous code, the variable apic_sw_disabled influences recalculate_apic_map. But in "KVM: x86: simplify kvm_apic_map" (commit: 3b5a5ffa ), the access to apic_sw_disabled in recalculate_apic_map has been deleted. Signed-off-by:
Peng Hao <peng.hao2@zte.com.cn> Reviewed-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Peng Hao authored
structure svm_init_data is never used. So remove it. Signed-off-by:
Peng Hao <peng.hao2@zte.com.cn> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Jim Mattson authored
Like IA32_STAR, IA32_LSTAR and IA32_FMASK only need to contain guest values on VM-entry when the guest is in long mode and EFER.SCE is set. Signed-off-by:
Jim Mattson <jmattson@google.com> Reviewed-by:
Peter Shier <pshier@google.com> Reviewed-by:
Marc Orr <marcorr@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Jim Mattson authored
SYSCALL raises #UD in compatibility mode on Intel CPUs, so it's pointless to load the guest's IA32_CSTAR value into the hardware MSR. IA32_CSTAR still provides 48 bits of storage on Intel CPUs that have CPUID.80000001:EDX.LM[bit 29] set, so we cannot remove it from the vmx_msr_index[] array. Signed-off-by:
Jim Mattson <jmattson@google.com> Reviewed-by:
Peter Shier <pshier@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Jim Mattson authored
Add a comment explaining why MSR_STAR must be included in vmx_msr_index[] even for i386 builds. The elided comment has not been relevant since move_msr_up() was introduced in commit a75beee6 ("KVM: VMX: Avoid saving and restoring msrs on lightweight vmexit"). Signed-off-by:
Jim Mattson <jmattson@google.com> Reviewed-by:
Peter Shier <pshier@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Jim Mattson authored
RDTSCP is supported in legacy mode as well as long mode. The IA32_TSC_AUX MSR should be set to the correct guest value before entering any guest that supports RDTSCP. Fixes: 4e47c7a6 ("KVM: VMX: Add instruction rdtscp support for guest") Signed-off-by:
Jim Mattson <jmattson@google.com> Reviewed-by:
Peter Shier <pshier@google.com> Reviewed-by:
Marc Orr <marcorr@google.com> Reviewed-by:
Liran Alon <liran.alon@oracle.com> Reviewed-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
From a functional perspective, this is (supposed to be) a straight copy-paste of code. Code was moved piecemeal to nested.c as not all code that could/should be moved was obviously nested-only. The nested code was then re-ordered as needed to compile, i.e. stats may not show this is being a "pure" move despite there not being any intended changes in functionality. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Exposing only the function allows @nested, i.e. the module param, to be statically defined in vmx.c, ensuring we aren't unnecessarily checking said variable in the nested code. nested_vmx_allowed() is exposed due to the need to verify nested support in vmx_{get,set}_nested_state(). The downside is that nested_vmx_allowed() likely won't be inlined in vmx_{get,set}_nested_state(), but that should be a non-issue as they're not a hot path. Keeping vmx_{get,set}_nested_state() in vmx.c isn't a viable option as they need access to several nested-only functions. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
...as they're used directly by the nested code. This will allow moving the bulk of the nested code out of vmx.c without concurrent changes to vmx.h. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Exposed vmx_msr_index, vmx_return and host_efer via vmx.h so that the nested code can be moved out of vmx.c. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
...so that the function doesn't need to be created when moving the nested code out of vmx.c. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
...so that it doesn't need access to @nested. The only case where the provided struct isn't already zeroed is the call from vmx_create_vcpu() as setup_vmcs_config() zeroes the struct in the other use cases. This will allow @nested to be statically defined in vmx.c, i.e. this removes the last direct reference from nested code. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
...in nested-specific code so that they can eventually be moved out of vmx.c, e.g. into nested.c. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
...so that future patches can reference e.g. @kvm_vmx_exit_handlers without having to simultaneously move a big chunk of code. Speaking from experience, resolving merge conflicts is an absolute nightmare without pre-moving the code. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
...so that it can conditionally set by the VMX code, i.e. iff @nested is true. This will in turn allow it to be moved out of vmx.c and into a nested-specified file. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Eventually this will allow us to move the nested VMX code out of vmx.c. Note that this also effectively wraps @enable_shadow_vmcs with @nested so that it too can be moved out of vmx.c. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
VMX has a few hundred lines of code just to wrap various VMX specific instructions, e.g. VMWREAD, INVVPID, etc... Move them to a dedicated header so it's easier to find/isolate the boilerplate. With this change, more inlines can be moved from vmx.c to vmx.h. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- Dec 14, 2018
-
-
Sean Christopherson authored
The header, evmcs.h, already exists and contains a fair amount of code, but there are a few pieces in vmx.c that can be moved verbatim. In addition, move an array definition to evmcs.c to prepare for multiple consumers of evmcs.h. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
vmcs12 is the KVM-defined struct used to track a nested VMCS, e.g. a VMCS created by L1 for L2. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
This isn't intended to be a pure reflection of hardware, e.g. struct loaded_vmcs and struct vmcs_host_state are KVM-defined constructs. Similar to capabilities.h, this is a standalone file to avoid circular dependencies between yet-to-be-created vmx.h and nested.h files. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Expose the variables associated with various module params that are needed by the nested VMX code. There is no ulterior logic for what variables are/aren't exposed, this is purely "what's needed by the nested code". Note that @nested is intentionally not exposed. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Defining a separate capabilities.h as opposed to putting this code in e.g. vmx.h avoids circular dependencies between (the yet-to-be-added) vmx.h and nested.h. The aforementioned circular dependencies are why struct nested_vmx_msrs also resides in capabilities instead of e.g. nested.h. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
...instead of referencing the global struct. This will allow moving setup_vmcs_config() to a separate file that may not have access to the global variable. Modify nested_vmx_setup_ctls_msrs() appropriately since vmx_capability.ept may not be accurate when called by vmx_check_processor_compat(). No functional change intended. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
EFER and PERF_GLOBAL_CTRL MSRs have dedicated VM Entry/Exit controls that KVM dynamically toggles based on whether or not the guest's value for each MSRs differs from the host. Handle the dynamic behavior by adding a helper that clears the dynamic bits so the bits aren't set when initializing the VMCS field outside of the dynamic toggling flow. This makes the handling consistent with similar behavior for other controls, e.g. pin, exec and sec_exec. More importantly, it eliminates two global bools that are stealthily modified by setup_vmcs_config. Opportunistically clean up a comment and print related to errata for IA32_PERF_GLOBAL_CTRL. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
MSR_IA32_XSS has no relation to the VMCS whatsoever, it doesn't belong in setup_vmcs_config() and its reference to host_xss prevents moving setup_vmcs_config() to a dedicated file. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
VMX specific files now reside in a dedicated subdirectory, i.e. the file name prefix is redundant. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
VMX specific files now reside in a dedicated subdirectory. Drop the "vmx" prefix, which is redundant, and add a "vmcs" prefix to clarify that the file is referring to VMCS shadow fields. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
...to prepare for shattering vmx.c into multiple files without having to prepend "vmx_" to all new files. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Until this point vmx.c has been the only consumer and included the file after many others. Prepare for multiple consumers, i.e. the shattering of vmx.c Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Until this point vmx.c has been the only consumer and included the file after many others. Prepare for multiple consumers, i.e. the shattering of vmx.c Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
...to prepare for the creation of a "vmx" subdirectory that will contain a variety of headers. Clean things up now to avoid making a bigger mess in the future. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
...and make enable_shadow_vmcs depend on nested. Aside from the obvious memory savings, this will allow moving the relevant code out of vmx.c in the future, e.g. to a nested specific file. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Fixes: 34a1cd60 ("kvm: x86: vmx: move some vmx setting from vmx_init() to hardware_setup()") Cc: stable@vger.kernel.org Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-