To prevent randconfig build issues when enabling the RZ/Five SoC, consider
selecting specific configurations only when their dependencies are
satisfied.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308311610.ec6bm2G8-lkp@intel.com/


Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Fixes: 484861e0

 ("soc: renesas: Kconfig: Select the required configs for RZ/Five SoC")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230901110936.313171-1-prabhakar.mahadev-lad.rj@bp.renesas.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Andes errata uses sbi_ecalll() which is only available if RISCV_SBI is
enabled. So add an dependency for RISCV_SBI in ERRATA_ANDES config to
avoid any build failures.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308311610.ec6bm2G8-lkp@intel.com/


Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230901110320.312674-1-prabhakar.mahadev-lad.rj@bp.renesas.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Now that RISCV_DMA_NONCOHERENT conditionally selects DMA_DIRECT_REMAP
ie only if MMU is enabled, we no longer need the MMU dependency in
ERRATA_ANDES_CMO config.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230901105858.311745-1-prabhakar.mahadev-lad.rj@bp.renesas.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

kernel/dma/mapping.c has its use of pgprot_dmacoherent() inside
an #ifdef CONFIG_MMU block. kernel/dma/pool.c has its use of
pgprot_dmacoherent() inside an #ifdef CONFIG_DMA_DIRECT_REMAP block.
So select DMA_DIRECT_REMAP only if MMU is enabled for RISCV_DMA_NONCOHERENT
config.

This avoids users to explicitly select MMU.

Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20230901105111.311200-1-prabhakar.mahadev-lad.rj@bp.renesas.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Puranjay Mohan <puranjay12@gmail.com> says:

Here is some data to prove the V2 fixes the problem:

Without this series:
root@rv-selftester:~/src/kselftest/bpf# time ./test_tag
test_tag: OK (40945 tests)

real    7m47.562s
user    0m24.145s
sys     6m37.064s

With this series applied:
root@rv-selftester:~/src/selftest/bpf# time ./test_tag
test_tag: OK (40945 tests)

real    7m29.472s
user    0m25.865s
sys     6m18.401s

BPF programs currently consume a page each on RISCV. For systems with many BPF
programs, this adds significant pressure to instruction TLB. High iTLB pressure
usually causes slow down for the whole system.

Song Liu introduced the BPF prog pack allocator[1] to mitigate the above issue.
It packs multiple BPF programs into a single huge page. It is currently only
enabled for the x86_64 BPF JIT.

I enabled this allocator on the ARM64 BPF JIT[2]. It is being reviewed now.

This patch series enables the BPF prog pack allocator for the RISCV BPF JIT.

======================================================
Performance Analysis of prog pack allocator on RISCV64
======================================================

Test setup:
===========

Host machine: Debian GNU/Linux 11 (bullseye)
Qemu Version: QEMU emulator version 8.0.3 (Debian 1:8.0.3+dfsg-1)
u-boot-qemu Version: 2023.07+dfsg-1
opensbi Version: 1.3-1

To test the performance of the BPF prog pack allocator on RV, a stresser
tool[4] linked below was built. This tool loads 8 BPF programs on the system and
triggers 5 of them in an infinite loop by doing system calls.

The runner script starts 20 instances of the above which loads 8*20=160 BPF
programs on the system, 5*20=100 of which are being constantly triggered.
The script is passed a command which would be run in the above environment.

The script was run with following perf command:
./run.sh "perf stat -a \
        -e iTLB-load-misses \
        -e dTLB-load-misses  \
        -e dTLB-store-misses \
        -e instructions \
        --timeout 60000"

The output of the above command is discussed below before and after enabling the
BPF prog pack allocator.

The tests were run on qemu-system-riscv64 with 8 cpus, 16G memory. The rootfs
was created using Bjorn's riscv-cross-builder[5] docker container linked below.

Results
=======

Before enabling prog pack allocator:
------------------------------------

Performance counter stats for 'system wide':

           4939048      iTLB-load-misses
           5468689      dTLB-load-misses
            465234      dTLB-store-misses
     1441082097998      instructions

      60.045791200 seconds time elapsed

After enabling prog pack allocator:
-----------------------------------

Performance counter stats for 'system wide':

           3430035      iTLB-load-misses
           5008745      dTLB-load-misses
            409944      dTLB-store-misses
     1441535637988      instructions

      60.046296600 seconds time elapsed

Improvements in metrics
=======================

It was expected that the iTLB-load-misses would decrease as now a single huge
page is used to keep all the BPF programs compared to a single page for each
program earlier.

--------------------------------------------
The improvement in iTLB-load-misses: -30.5 %
--------------------------------------------

I repeated this expriment more than 100 times in different setups and the
improvement was always greater than 30%.

This patch series is boot tested on the Starfive VisionFive 2 board[6].
The performance analysis was not done on the board because it doesn't
expose iTLB-load-misses, etc. The stresser program was run on the board to test
the loading and unloading of BPF programs

[1] https://lore.kernel.org/bpf/20220204185742.271030-1-song@kernel.org/
[2] https://lore.kernel.org/all/20230626085811.3192402-1-puranjay12@gmail.com/
[3] https://lore.kernel.org/all/20230626085811.3192402-2-puranjay12@gmail.com/
[4] https://github.com/puranjaymohan/BPF-Allocator-Bench
[5] https://github.com/bjoto/riscv-cross-builder
[6] https://www.starfivetech.com/en/site/boards

* b4-shazam-merge:
  bpf, riscv: use prog pack allocator in the BPF JIT
  riscv: implement a memset like function for text
  riscv: extend patch_text_nosync() for multiple pages
  bpf: make bpf_prog_pack allocator portable

Link: https://lore.kernel.org/r/20230831131229.497941-1-puranjay12@gmail.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Alexandre Ghiti <alexghiti@rivosinc.com> says:

The following KASLR implementation allows to randomize the kernel mapping:

- virtually: we expect the bootloader to provide a seed in the device-tree
- physically: only implemented in the EFI stub, it relies on the firmware to
  provide a seed using EFI_RNG_PROTOCOL. arm64 has a similar implementation
  hence the patch 3 factorizes KASLR related functions for riscv to take
  advantage.

The new virtual kernel location is limited by the early page table that only
has one PUD and with the PMD alignment constraint, the kernel can only take
< 512 positions.

* b4-shazam-merge:
  riscv: libstub: Implement KASLR by using generic functions
  libstub: Fix compilation warning for rv32
  arm64: libstub: Move KASLR handling functions to kaslr.c
  riscv: Dump out kernel offset information on panic
  riscv: Introduce virtual kernel mapping KASLR

Link: https://lore.kernel.org/r/20230722123850.634544-1-alexghiti@rivosinc.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

This resurrects the vector ptrace() support that was removed for 6.5 due
to some bugs cropping up as part of the GDB review process.

* b4-shazam-merge:
  RISC-V: Add ptrace support for vectors

Link: https://lore.kernel.org/r/20230825050248.32681-1-andy.chiu@sifive.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Prabhakar <prabhakar.csengg@gmail.com> says:

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

non-coherent DMA support for AX45MP
====================================

On the Andes AX45MP core, cache coherency is a specification option so it
may not be supported. In this case DMA will fail. To get around with this
issue this patch series does the below:

1] Andes alternative ports is implemented as errata which checks if the
IOCP is missing and only then applies to CMO errata. One vendor specific
SBI EXT (ANDES_SBI_EXT_IOCP_SW_WORKAROUND) is implemented as part of
errata.

Below are the configs which Andes port provides (and are selected by
RZ/Five):
      - ERRATA_ANDES
      - ERRATA_ANDES_CMO

OpenSBI patch supporting ANDES_SBI_EXT_IOCP_SW_WORKAROUND SBI is now
part v1.3 release.

2] Andes AX45MP core has a Programmable Physical Memory Attributes (PMA)
block that allows dynamic adjustment of memory attributes in the runtime.
It contains a configurable amount of PMA entries implemented as CSR
registers to control the attributes of memory locations in interest.
OpenSBI configures the PMA regions as required and creates a reserve memory
node and propagates it to the higher boot stack.

Currently OpenSBI (upstream) configures the required PMA region and passes
this a shared DMA pool to Linux.

    reserved-memory {
        #address-cells = <2>;
        #size-cells = <2>;
        ranges;

        pma_resv0@58000000 {
            compatible = "shared-dma-pool";
            reg = <0x0 0x58000000 0x0 0x08000000>;
            no-map;
            linux,dma-default;
        };
    };

The above shared DMA pool gets appended to Linux DTB so the DMA memory
requests go through this region.

3] We provide callbacks to synchronize specific content between memory and
cache.

4] RZ/Five SoC selects the below configs
        - AX45MP_L2_CACHE
        - DMA_GLOBAL_POOL
        - ERRATA_ANDES
        - ERRATA_ANDES_CMO

----------x---------------------x--------------------x---------------x----

* b4-shazam-merge:
  soc: renesas: Kconfig: Select the required configs for RZ/Five SoC
  cache: Add L2 cache management for Andes AX45MP RISC-V core
  dt-bindings: cache: andestech,ax45mp-cache: Add DT binding documentation for L2 cache controller
  riscv: mm: dma-noncoherent: nonstandard cache operations support
  riscv: errata: Add Andes alternative ports
  riscv: asm: vendorid_list: Add Andes Technology to the vendors list

Link: https://lore.kernel.org/r/20230818135723.80612-1-prabhakar.mahadev-lad.rj@bp.renesas.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Prabhakar <prabhakar.csengg@gmail.com> says:

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

This patch series is a subset from Arnd's original series [0]. Ive just
picked up the bits required for RISC-V unification of cache flushing.
Remaining patches from the series [0] will be taken care by Arnd soon.

* b4-shazam-merge:
  riscv: dma-mapping: switch over to generic implementation
  riscv: dma-mapping: skip invalidation before bidirectional DMA
  riscv: dma-mapping: only invalidate after DMA, not flush

Link: https://lore.kernel.org/r/20230816232336.164413-1-prabhakar.mahadev-lad.rj@bp.renesas.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Evan Green <evan@rivosinc.com> says:

The current setting for the hwprobe bit indicating misaligned access
speed is controlled by a vendor-specific feature probe function. This is
essentially a per-SoC table we have to maintain on behalf of each vendor
going forward. Let's convert that instead to something we detect at
runtime.

We have two assembly routines at the heart of our probe: one that
does a bunch of word-sized accesses (without aligning its input buffer),
and the other that does byte accesses. If we can move a larger number of
bytes using misaligned word accesses than we can with the same amount of
time doing byte accesses, then we can declare misaligned accesses as
"fast".

The tradeoff of reducing this maintenance burden is boot time. We spend
4-6 jiffies per core doing this measurement (0-2 on jiffie edge
alignment, and 4 on measurement). The timing loop was based on
raid6_choose_gen(), which uses (16+1)*N jiffies (where N is the number
of algorithms). By taking only the fastest iteration out of all
attempts for use in the comparison, variance between runs is very low.
On my THead C906, it looks like this:

[    0.047563] cpu0: Ratio of byte access time to unaligned word access is 4.34, unaligned accesses are fast

Several others have chimed in with results on slow machines with the
older algorithm, which took all runs into account, including noise like
interrupts. Even with this variation, results indicate that in all cases
(fast, slow, and emulated) the measured numbers are nowhere near each
other (always multiple factors away).

* b4-shazam-merge:
  RISC-V: alternative: Remove feature_probe_func
  RISC-V: Probe for unaligned access speed

Link: https://lore.kernel.org/r/20230818194136.4084400-1-evan@rivosinc.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Use bpf_jit_binary_pack_alloc() for memory management of JIT binaries in
RISCV BPF JIT. The bpf_jit_binary_pack_alloc creates a pair of RW and RX
buffers. The JIT writes the program into the RW buffer. When the JIT is
done, the program is copied to the final RX buffer with
bpf_jit_binary_pack_finalize.

Implement bpf_arch_text_copy() and bpf_arch_text_invalidate() for RISCV
JIT as these functions are required by bpf_jit_binary_pack allocator.

Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Reviewed-by: Song Liu <song@kernel.org>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20230831131229.497941-5-puranjay12@gmail.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

The BPF JIT needs to write invalid instructions to RX regions of memory to
invalidate removed BPF programs. This needs a function like memset() that
can work with RX memory.

Implement patch_text_set_nosync() which is similar to text_poke_set() of
x86.

Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20230831131229.497941-4-puranjay12@gmail.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

The patch_insn_write() function currently doesn't work for multiple pages
of instructions, therefore patch_text_nosync() will fail with a page fault
if called with lengths spanning multiple pages.

This commit extends the patch_insn_write() function to support multiple
pages by copying at max 2 pages at a time in a loop. This implementation
is similar to text_poke_copy() function of x86.

Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20230831131229.497941-3-puranjay12@gmail.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

The bpf_prog_pack allocator currently uses module_alloc() and
module_memfree() to allocate and free memory. This is not portable
because different architectures use different methods for allocating
memory for BPF programs. Like ARM64 and riscv use vmalloc()/vfree().

Use bpf_jit_alloc_exec() and bpf_jit_free_exec() for memory management
in bpf_prog_pack allocator. Other architectures can override these with
their implementation and will be able to use bpf_prog_pack directly.

On architectures that don't override bpf_jit_alloc/free_exec() this is
basically a NOP.

Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20230831131229.497941-2-puranjay12@gmail.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

We can now use arm64 functions to handle the move of the kernel physical
mapping: if KASLR is enabled, we will try to get a random seed from the
firmware, if not possible, the kernel will be moved to a location that
suits its alignment constraints.

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Song Shuai <songshuaishuai@tinylab.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20230722123850.634544-6-alexghiti@rivosinc.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Fix the following warning which appears when compiled for rv32 by using
unsigned long type instead of u64.

../drivers/firmware/efi/libstub/efi-stub-helper.c: In function 'efi_kaslr_relocate_kernel':
../drivers/firmware/efi/libstub/efi-stub-helper.c:846:28: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
  846 |                            (u64)_end < EFI_ALLOC_LIMIT) {

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Song Shuai <songshuaishuai@tinylab.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20230722123850.634544-5-alexghiti@rivosinc.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

This prepares for riscv to use the same functions to handle the pĥysical
kernel move when KASLR is enabled.

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Song Shuai <songshuaishuai@tinylab.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20230722123850.634544-4-alexghiti@rivosinc.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Dump out the KASLR virtual kernel offset when panic to help debug kernel.

Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Song Shuai <songshuaishuai@tinylab.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20230722123850.634544-3-alexghiti@rivosinc.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

KASLR implementation relies on a relocatable kernel so that we can move
the kernel mapping.

The seed needed to virtually move the kernel is taken from the device tree,
so we rely on the bootloader to provide a correct seed. Zkr could be used
unconditionnally instead if implemented, but that's for another patch.

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Song Shuai <songshuaishuai@tinylab.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20230722123850.634544-2-alexghiti@rivosinc.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

This patch add back the ptrace support with the following fix:
 - Define NT_RISCV_CSR and re-number NT_RISCV_VECTOR to prevent
   conflicting with gdb's NT_RISCV_CSR.
 - Use struct __riscv_v_regset_state to handle ptrace requests

Since gdb does not directly include the note description header in
Linux and has already defined NT_RISCV_CSR as 0x900, we decide to
sync with gdb and renumber NT_RISCV_VECTOR to solve and prevent future
conflicts.

Fixes: 0c59922c

 ("riscv: Add ptrace vector support")
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Link: https://lore.kernel.org/r/20230825050248.32681-1-andy.chiu@sifive.com


[Palmer: Drop the unused "size" variable in riscv_vr_set().]
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Explicitly select the required Cache management and Errata configs
required for the RZ/Five SoC.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Conor Dooley <conor.dooley@microchip.com> # tyre-kicking on a d1
Link: https://lore.kernel.org/r/20230818135723.80612-7-prabhakar.mahadev-lad.rj@bp.renesas.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

I/O Coherence Port (IOCP) provides an AXI interface for connecting
external non-caching masters, such as DMA controllers. The accesses
from IOCP are coherent with D-Caches and L2 Cache.

IOCP is a specification option and is disabled on the Renesas RZ/Five
SoC due to this reason IP blocks using DMA will fail.

The Andes AX45MP core has a Programmable Physical Memory Attributes (PMA)
block that allows dynamic adjustment of memory attributes in the runtime.
It contains a configurable amount of PMA entries implemented as CSR
registers to control the attributes of memory locations in interest.
Below are the memory attributes supported:
* Device, Non-bufferable
* Device, bufferable
* Memory, Non-cacheable, Non-bufferable
* Memory, Non-cacheable, Bufferable
* Memory, Write-back, No-allocate
* Memory, Write-back, Read-allocate
* Memory, Write-back, Write-allocate
* Memory, Write-back, Read and Write-allocate

More info about PMA (section 10.3):
Link: http://www.andestech.com/wp-content/uploads/AX45MP-1C-Rev.-5.0.0-Datasheet.pdf



As a workaround for SoCs with IOCP disabled CMO needs to be handled by
software. Firstly OpenSBI configures the memory region as
"Memory, Non-cacheable, Bufferable" and passes this region as a global
shared dma pool as a DT node. With DMA_GLOBAL_POOL enabled all DMA
allocations happen from this region and synchronization callbacks are
implemented to synchronize when doing DMA transactions.

Example PMA region passes as a DT node from OpenSBI:
    reserved-memory {
        #address-cells = <2>;
        #size-cells = <2>;
        ranges;

        pma_resv0@58000000 {
            compatible = "shared-dma-pool";
            reg = <0x0 0x58000000 0x0 0x08000000>;
            no-map;
            linux,dma-default;
        };
    };

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com> # tyre-kicking on a d1
Link: https://lore.kernel.org/r/20230818135723.80612-6-prabhakar.mahadev-lad.rj@bp.renesas.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Add DT binding documentation for L2 cache controller found on RZ/Five SoC.

The Renesas RZ/Five microprocessor includes a RISC-V CPU Core (AX45MP
Single) from Andes. The AX45MP core has an L2 cache controller, this patch
describes the L2 cache block.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com> # tyre-kicking on a d1
Link: https://lore.kernel.org/r/20230818135723.80612-5-prabhakar.mahadev-lad.rj@bp.renesas.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Introduce support for nonstandard noncoherent systems in the RISC-V
architecture. It enables function pointer support to handle cache
management in such systems.

This patch adds a new configuration option called
"RISCV_NONSTANDARD_CACHE_OPS." This option is a boolean flag that
depends on "RISCV_DMA_NONCOHERENT" and enables the function pointer
support for cache management in nonstandard noncoherent systems.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com> # tyre-kicking on a d1
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> #
Link: https://lore.kernel.org/r/20230818135723.80612-4-prabhakar.mahadev-lad.rj@bp.renesas.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Add required ports of the Alternative scheme for Andes CPU cores.

I/O Coherence Port (IOCP) provides an AXI interface for connecting external
non-caching masters, such as DMA controllers. IOCP is a specification
option and is disabled on the Renesas RZ/Five SoC due to this reason cache
management needs a software workaround.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com> # tyre-kicking on a d1
Link: https://lore.kernel.org/r/20230818135723.80612-3-prabhakar.mahadev-lad.rj@bp.renesas.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Add Andes Technology to the vendors list.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Conor Dooley <conor.dooley@microchip.com> # tyre-kicking on a d1
Link: https://lore.kernel.org/r/20230818135723.80612-2-prabhakar.mahadev-lad.rj@bp.renesas.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Add helper functions for cache wback/inval/clean and use them
arch_sync_dma_for_device()/arch_sync_dma_for_cpu() functions. The proposed
changes are in preparation for switching over to generic implementation.

Reorganization of the code is based on the patch (Link[0]) from Arnd.
For now I have dropped CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU check as this
will be enabled by default upon selection of RISCV_DMA_NONCOHERENT
and also dropped arch_dma_mark_dcache_clean().

Link[0]: https://lore.kernel.org/all/20230327121317.4081816-22-arnd@kernel.org/


Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20230816232336.164413-4-prabhakar.mahadev-lad.rj@bp.renesas.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

For a DMA_BIDIRECTIONAL transfer, the caches have to be cleaned
first to let the device see data written by the CPU, and invalidated
after the transfer to let the CPU see data written by the device.

riscv also invalidates the caches before the transfer, which does
not appear to serve any purpose.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20230816232336.164413-3-prabhakar.mahadev-lad.rj@bp.renesas.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

No other architecture intentionally writes back dirty cache lines into
a buffer that a device has just finished writing into. If the cache is
clean, this has no effect at all, but if a cacheline in the buffer has
actually been written by the CPU,  there is a driver bug that is likely
made worse by overwriting that buffer.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20230816232336.164413-2-prabhakar.mahadev-lad.rj@bp.renesas.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Now that we're testing unaligned memory copy and making that
determination generically, there are no more users of the vendor
feature_probe_func(). While I think it's probably going to need to come
back, there are no users right now, so let's remove it until it's
needed.

Signed-off-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230818194136.4084400-3-evan@rivosinc.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Rather than deferring unaligned access speed determinations to a vendor
function, let's probe them and find out how fast they are. If we
determine that an unaligned word access is faster than N byte accesses,
mark the hardware's unaligned access as "fast". Otherwise, we mark
accesses as slow.

The algorithm itself runs for a fixed amount of jiffies. Within each
iteration it attempts to time a single loop, and then keeps only the best
(fastest) loop it saw. This algorithm was found to have lower variance from
run to run than my first attempt, which counted the total number of
iterations that could be done in that fixed amount of jiffies. By taking
only the best iteration in the loop, assuming at least one loop wasn't
perturbed by an interrupt, we eliminate the effects of interrupts and
other "warm up" factors like branch prediction. The only downside is it
depends on having an rdtime granular and accurate enough to measure a
single copy. If we ever manage to complete a loop in 0 rdtime ticks, we
leave the unaligned setting at UNKNOWN.

There is a slight change in user-visible behavior here. Previously, all
boards except the THead C906 reported misaligned access speed of
UNKNOWN. C906 reported FAST. With this change, since we're now measuring
misaligned access speed on each hart, all RISC-V systems will have this
key set as either FAST or SLOW.

Currently, we don't have a way to confidently measure the difference between
SLOW and EMULATED, so we label anything not fast as SLOW. This will
mislabel some systems that are actually EMULATED as SLOW. When we get
support for delegating misaligned access traps to the kernel (as opposed
to the firmware quietly handling it), we can explicitly test in Linux to
see if unaligned accesses trap. Those systems will start to report
EMULATED, though older (today's) systems without that new SBI mechanism
will continue to report SLOW.

I've updated the documentation for those hwprobe values to reflect
this, specifically: SLOW may or may not be emulated by software, and FAST
represents means being faster than equivalent byte accesses. The change
in documentation is accurate with respect to both the former and current
behavior.

Signed-off-by: Evan Green <evan@rivosinc.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230818194136.4084400-2-evan@rivosinc.com


Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Pull RISC-V updates from Palmer Dabbelt:

 - Support for the new "riscv,isa-extensions" and "riscv,isa-base"
   device tree interfaces for probing extensions

 - Support for userspace access to the performance counters

 - Support for more instructions in kprobes

 - Crash kernels can be allocated above 4GiB

 - Support for KCFI

 - Support for ELFs in !MMU configurations

 - ARCH_KMALLOC_MINALIGN has been reduced to 8

 - mmap() defaults to sv48-sized addresses, with longer addresses hidden
   behind a hint (similar to Arm and Intel)

 - Also various fixes and cleanups

* tag 'riscv-for-linus-6.6-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
  lib/Kconfig.debug: Restrict DEBUG_INFO_SPLIT for RISC-V
  riscv: support PREEMPT_DYNAMIC with static keys
  riscv: Move create_tmp_mapping() to init sections
  riscv: Mark KASAN tmp* page tables variables as static
  riscv: mm: use bitmap_zero() API
  riscv: enable DEBUG_FORCE_FUNCTION_ALIGN_64B
  riscv: remove redundant mv instructions
  RISC-V: mm: Document mmap changes
  RISC-V: mm: Update pgtable comment documentation
  RISC-V: mm: Add tests for RISC-V mm
  RISC-V: mm: Restrict address space for sv39,sv48,sv57
  riscv: enable DMA_BOUNCE_UNALIGNED_KMALLOC for !dma_coherent
  riscv: allow kmalloc() caches aligned to the smallest value
  riscv: support the elf-fdpic binfmt loader
  binfmt_elf_fdpic: support 64-bit systems
  riscv: Allow CONFIG_CFI_CLANG to be selected
  riscv/purgatory: Disable CFI
  riscv: Add CFI error handling
  riscv: Add ftrace_stub_graph
  riscv: Add types to indirectly called assembly functions
  ...

Pull arch/csky fix from Guo Ren:

 - Fix compile error by missing header file

* tag 'csky-for-linus-6.6-2' of https://github.com/c-sky/csky-linux:
  csky: Fixup compile error

Pull NFS client updates from Anna Schumaker:
 "New Features:
   - Enable the NFS v4.2 READ_PLUS operation by default

  Stable Fixes:
   - NFSv4/pnfs: minor fix for cleanup path in nfs4_get_device_info
   - NFS: Fix a potential data corruption

  Bugfixes:
   - Fix various READ_PLUS issues including:
      - smatch warnings
      - xdr size calculations
      - scratch buffer handling
      - 32bit / highmem xdr page handling
   - Fix checkpatch errors in file.c
   - Fix redundant readdir request after an EOF
   - Fix handling of COPY ERR_OFFLOAD_NO_REQ
   - Fix assignment of xprtdata.cred

  Cleanups:
   - Remove unused xprtrdma function declarations
   - Clean up an integer overflow check to avoid a warning
   - Clean up #includes in dns_resolve.c
   - Clean up nfs4_get_device_info so we don't pass a NULL pointer
     to __free_page()
   - Clean up sunrpc TCP socket timeout configuration
   - Guard against READDIR loops when entry names are too long
   - Use EXCHID4_FLAG_USE_PNFS_DS for DS servers"

* tag 'nfs-for-6.6-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (22 commits)
  pNFS: Fix assignment of xprtdata.cred
  NFSv4.2: fix handling of COPY ERR_OFFLOAD_NO_REQ
  NFS: Guard against READDIR loop when entry names exceed MAXNAMELEN
  NFSv4.1: use EXCHGID4_FLAG_USE_PNFS_DS for DS server
  NFS/pNFS: Set the connect timeout for the pNFS flexfiles driver
  SUNRPC: Don't override connect timeouts in rpc_clnt_add_xprt()
  SUNRPC: Allow specification of TCP client connect timeout at setup
  SUNRPC: Refactor and simplify connect timeout
  SUNRPC: Set the TCP_SYNCNT to match the socket timeout
  NFS: Fix a potential data corruption
  nfs: fix redundant readdir request after get eof
  nfs/blocklayout: Use the passed in gfp flags
  filemap: Fix errors in file.c
  NFSv4/pnfs: minor fix for cleanup path in nfs4_get_device_info
  NFS: Move common includes outside ifdef
  SUNRPC: clean up integer overflow check
  xprtrdma: Remove unused function declaration rpcrdma_bc_post_recv()
  NFS: Enable the READ_PLUS operation by default
  SUNRPC: kmap() the xdr pages during decode
  NFSv4.2: Rework scratch handling for READ_PLUS (again)
  ...

Pull nfsd updates from Chuck Lever:
 "I'm thrilled to announce that the Linux in-kernel NFS server now
  offers NFSv4 write delegations. A write delegation enables a client to
  cache data and metadata for a single file more aggressively, reducing
  network round trips and server workload. Many thanks to Dai Ngo for
  contributing this facility, and to Jeff Layton and Neil Brown for
  reviewing and testing it.

  This release also sees the removal of all support for DES- and
  triple-DES-based Kerberos encryption types in the kernel's SunRPC
  implementation. These encryption types have been deprecated by the
  Internet community for years and are considered insecure. This change
  affects both the in-kernel NFS client and server.

  The server's UDP and TCP socket transports have now fully adopted
  David Howells' new bio_vec iterator so that no more than one sendmsg()
  call is needed to transmit each RPC message. In particular, this helps
  kTLS optimize record boundaries when sending RPC-with-TLS replies, and
  it takes the server a baby step closer to handling file I/O via
  folios.

  We've begun work on overhauling the SunRPC thread scheduler to remove
  a costly linked-list walk when looking for an idle RPC service thread
  to wake. The pre-requisites are included in this release. Thanks to
  Neil Brown for his ongoing work on this improvement"

* tag 'nfsd-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (56 commits)
  Documentation: Add missing documentation for EXPORT_OP flags
  SUNRPC: Remove unused declaration rpc_modcount()
  SUNRPC: Remove unused declarations
  NFSD: da_addr_body field missing in some GETDEVICEINFO replies
  SUNRPC: Remove return value of svc_pool_wake_idle_thread()
  SUNRPC: make rqst_should_sleep() idempotent()
  SUNRPC: Clean up svc_set_num_threads
  SUNRPC: Count ingress RPC messages per svc_pool
  SUNRPC: Deduplicate thread wake-up code
  SUNRPC: Move trace_svc_xprt_enqueue
  SUNRPC: Add enum svc_auth_status
  SUNRPC: change svc_xprt::xpt_flags bits to enum
  SUNRPC: change svc_rqst::rq_flags bits to enum
  SUNRPC: change svc_pool::sp_flags bits to enum
  SUNRPC: change cache_head.flags bits to enum
  SUNRPC: remove timeout arg from svc_recv()
  SUNRPC: change svc_recv() to return void.
  SUNRPC: call svc_process() from svc_recv().
  nfsd: separate nfsd_last_thread() from nfsd_put()
  nfsd: Simplify code around svc_exit_thread() call in nfsd()
  ...

Pull smb server updates from Steve French:

 - fix potential overflows in decoding create and in session setup
   requests

 - cleanup fixes

 - compounding fixes, including one for MacOS compounded read requests

 - session setup error handling fix

 - fix mode bit bug when applying force_directory_mode and
   force_create_mode

 - RDMA (smbdirect) write fix

* tag '6.6-rc-ksmbd-fixes-part1' of git://git.samba.org/ksmbd:
  ksmbd: add missing calling smb2_set_err_rsp() on error
  ksmbd: replace one-element array with flex-array member in struct smb2_ea_info
  ksmbd: fix slub overflow in ksmbd_decode_ntlmssp_auth_blob()
  ksmbd: fix wrong DataOffset validation of create context
  ksmbd: Fix one kernel-doc comment
  ksmbd: reduce descriptor size if remaining bytes is less than request size
  ksmbd: fix `force create mode' and `force directory mode'
  ksmbd: fix wrong interim response on compound
  ksmbd: add support for read compound
  ksmbd: switch to use kmemdup_nul() helper

Pull jfs updates from Dave Kleikamp:
 "A few small fixes"

* tag 'jfs-6.6' of github.com:kleikamp/linux-shaggy:
  jfs: validate max amount of blocks before allocation.
  jfs: remove redundant initialization to pointer ip
  jfs: fix invalid free of JFS_IP(ipimap)->i_imap in diUnmount
  FS: JFS: (trivial) Fix grammatical error in extAlloc
  fs/jfs: prevent double-free in dbUnmount() after failed jfs_remount()

Pull ext4 updates from Ted Ts'o:
 "Many ext4 and jbd2 cleanups and bug fixes:

   - Cleanups in the ext4 remount code when going to and from read-only

   - Cleanups in ext4's multiblock allocator

   - Cleanups in the jbd2 setup/mounting code paths

   - Performance improvements when appending to a delayed allocation file

   - Miscellaneous syzbot and other bug fixes"

* tag 'ext4_for_linus-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (60 commits)
  ext4: fix slab-use-after-free in ext4_es_insert_extent()
  libfs: remove redundant checks of s_encoding
  ext4: remove redundant checks of s_encoding
  ext4: reject casefold inode flag without casefold feature
  ext4: use LIST_HEAD() to initialize the list_head in mballoc.c
  ext4: do not mark inode dirty every time when appending using delalloc
  ext4: rename s_error_work to s_sb_upd_work
  ext4: add periodic superblock update check
  ext4: drop dio overwrite only flag and associated warning
  ext4: add correct group descriptors and reserved GDT blocks to system zone
  ext4: remove unused function declaration
  ext4: mballoc: avoid garbage value from err
  ext4: use sbi instead of EXT4_SB(sb) in ext4_mb_new_blocks_simple()
  ext4: change the type of blocksize in ext4_mb_init_cache()
  ext4: fix unttached inode after power cut with orphan file feature enabled
  jbd2: correct the end of the journal recovery scan range
  ext4: ext4_get_{dev}_journal return proper error value
  ext4: cleanup ext4_get_dev_journal() and ext4_get_journal()
  jbd2: jbd2_journal_init_{dev,inode} return proper error return value
  jbd2: drop useless error tag in jbd2_journal_wipe()
  ...

Pull dlm updates from David Teigland:

 - Allow blocking posix lock requests to be interrupted while waiting.
   This requires a cancel request to be sent to the userspace daemon
   where posix lock requests are processed across the cluster.

 - Fix a posix lock patch from the previous cycle in which lock requests
   from different file systems could be mixed up.

 - Fix some long standing problems with nfs posix lock cancelation.

 - Add a new debugfs file for printing queued callbacks.

 - Stop modifying buffers that have been used to receive a message.

 - Misc cleanups and some refactoring.

* tag 'dlm-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  dlm: fix plock lookup when using multiple lockspaces
  fs: dlm: don't use RCOM_NAMES for version detection
  fs: dlm: create midcomms nodes when configure
  fs: dlm: constify receive buffer
  fs: dlm: drop rxbuf manipulation in dlm_recover_master_copy
  fs: dlm: drop rxbuf manipulation in dlm_copy_master_names
  fs: dlm: get recovery sequence number as parameter
  fs: dlm: cleanup lock order
  fs: dlm: remove clear_members_cb
  fs: dlm: add plock dev tracepoints
  fs: dlm: check on plock ops when exit dlm
  fs: dlm: debugfs for queued callbacks
  fs: dlm: remove unused processed_nodes
  fs: dlm: add missing spin_unlock
  fs: dlm: fix F_CANCELLK to cancel pending request
  fs: dlm: allow to F_SETLKW getting interrupted
  fs: dlm: remove twice newline

Pull more superblock follow-on fixes from Christian Brauner:
 "This contains two more small follow-up fixes for the super work this
  cycle. I went through all filesystems once more and detected two minor
  issues that still needed fixing:

   - Some filesystems support mtd devices (e.g., mount -t jffs2 mtd2
     /mnt). The mtd infrastructure uses the sb->s_mtd pointer to find an
     existing superblock. When the mtd device is put and sb->s_mtd
     cleared the superblock can still be found fs_supers and so this
     risks a use-after-free.

     Add a small patch that aligns mtd with what we did for regular
     block devices and switch keying to rely on sb->s_dev.

     (This was tested with mtd devices and jffs2 as xfstests doesn't
     support mtd devices.)

   - Switch nfs back to rely on kill_anon_super() so the superblock is
     removed from the list of active supers before sb->s_fs_info is
     freed"

* tag 'v6.6-vfs.super.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  NFS: switch back to using kill_anon_super
  mtd: key superblock by device number
  fs: export sget_dev()