- Nov 29, 2023
-
-
Pablo Neira Ayuso authored
commit f6c383b8 upstream. Use the GC transaction API to replace the old and buggy gc API and the busy mark approach. No set elements are removed from async garbage collection anymore, instead the _DEAD bit is set on so the set element is not visible from lookup path anymore. Async GC enqueues transaction work that might be aborted and retried later. rbtree and pipapo set backends does not set on the _DEAD bit from the sync GC path since this runs in control plane path where mutex is held. In this case, set elements are deactivated, removed and then released via RCU callback, sync GC never fails. Fixes: 3c4287f6 ("nf_tables: Add set type for arbitrary concatenation of ranges") Fixes: 8d8540c4 ("netfilter: nft_set_rbtree: add timeout support") Fixes: 9d098292 ("netfilter: nft_hash: add support for timeouts") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pablo Neira Ayuso authored
commit 5f68718b upstream. The set types rhashtable and rbtree use a GC worker to reclaim memory. >From system work queue, in periodic intervals, a scan of the table is done. The major caveat here is that the nft transaction mutex is not held. This causes a race between control plane and GC when they attempt to delete the same element. We cannot grab the netlink mutex from the work queue, because the control plane has to wait for the GC work queue in case the set is to be removed, so we get following deadlock: cpu 1 cpu2 GC work transaction comes in , lock nft mutex `acquire nft mutex // BLOCKS transaction asks to remove the set set destruction calls cancel_work_sync() cancel_work_sync will now block forever, because it is waiting for the mutex the caller already owns. This patch adds a new API that deals with garbage collection in two steps: 1) Lockless GC of expired elements sets on the NFT_SET_ELEM_DEAD_BIT so they are not visible via lookup. Annotate current GC sequence in the GC transaction. Enqueue GC transaction work as soon as it is full. If ruleset is updated, then GC transaction is aborted and retried later. 2) GC work grabs the mutex. If GC sequence has changed then this GC transaction lost race with control plane, abort it as it contains stale references to objects and let GC try again later. If the ruleset is intact, then this GC transaction deactivates and removes the elements and it uses call_rcu() to destroy elements. Note that no elements are removed from GC lockless path, the _DEAD bit is set and pointers are collected. GC catchall does not remove the elements anymore too. There is a new set->dead flag that is set on to abort the GC transaction to deal with set->ops->destroy() path which removes the remaining elements in the set from commit_release, where no mutex is held. To deal with GC when mutex is held, which allows safe deactivate and removal, add sync GC API which releases the set element object via call_rcu(). This is used by rbtree and pipapo backends which also perform garbage collection from control plane path. Since element removal from sets can happen from control plane and element garbage collection/timeout, it is necessary to keep the set structure alive until all elements have been deactivated and destroyed. We cannot do a cancel_work_sync or flush_work in nft_set_destroy because its called with the transaction mutex held, but the aforementioned async work queue might be blocked on the very mutex that nft_set_destroy() callchain is sitting on. This gives us the choice of ABBA deadlock or UaF. To avoid both, add set->refs refcount_t member. The GC API can then increment the set refcount and release it once the elements have been free'd. Set backends are adapted to use the GC transaction API in a follow up patch entitled: ("netfilter: nf_tables: use gc transaction API in set backends") This is joint work with Florian Westphal. Fixes: cfed7e1b ("netfilter: nf_tables: add set garbage collection helpers") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Florian Westphal authored
commit 24138933 upstream. There is an asymmetry between commit/abort and preparation phase if the following conditions are met: 1. set is a verdict map ("1.2.3.4 : jump foo") 2. timeouts are enabled In this case, following sequence is problematic: 1. element E in set S refers to chain C 2. userspace requests removal of set S 3. kernel does a set walk to decrement chain->use count for all elements from preparation phase 4. kernel does another set walk to remove elements from the commit phase (or another walk to do a chain->use increment for all elements from abort phase) If E has already expired in 1), it will be ignored during list walk, so its use count won't have been changed. Then, when set is culled, ->destroy callback will zap the element via nf_tables_set_elem_destroy(), but this function is only safe for elements that have been deactivated earlier from the preparation phase: lack of earlier deactivate removes the element but leaks the chain use count, which results in a WARN splat when the chain gets removed later, plus a leak of the nft_chain structure. Update pipapo_get() not to skip expired elements, otherwise flush command reports bogus ENOENT errors. Fixes: 3c4287f6 ("nf_tables: Add set type for arbitrary concatenation of ranges") Fixes: 8d8540c4 ("netfilter: nft_set_rbtree: add timeout support") Fixes: 9d098292 ("netfilter: nft_hash: add support for timeouts") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Florian Westphal authored
commit f718863a upstream. The lazy gc on insert that should remove timed-out entries fails to release the other half of the interval, if any. Can be reproduced with tests/shell/testcases/sets/0044interval_overlap_0 in nftables.git and kmemleak enabled kernel. Second bug is the use of rbe_prev vs. prev pointer. If rbe_prev() returns NULL after at least one iteration, rbe_prev points to element that is not an end interval, hence it should not be removed. Lastly, check the genmask of the end interval if this is active in the current generation. Fixes: c9e6978e ("netfilter: nft_set_rbtree: Switch to node list walk for overlap detection") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Florian Westphal authored
commit 61ae320a upstream. There is no guarantee that rb_prev() will not return NULL in nft_rbtree_gc_elem(): general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] nft_add_set_elem+0x14b0/0x2990 nf_tables_newsetelem+0x528/0xb30 Furthermore, there is a possible use-after-free while iterating, 'node' can be free'd so we need to cache the next value to use. Fixes: c9e6978e ("netfilter: nft_set_rbtree: Switch to node list walk for overlap detection") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pablo Neira Ayuso authored
commit c9e6978e upstream. ...instead of a tree descent, which became overly complicated in an attempt to cover cases where expired or inactive elements would affect comparisons with the new element being inserted. Further, it turned out that it's probably impossible to cover all those cases, as inactive nodes might entirely hide subtrees consisting of a complete interval plus a node that makes the current insertion not overlap. To speed up the overlap check, descent the tree to find a greater element that is closer to the key value to insert. Then walk down the node list for overlap detection. Starting the overlap check from rb_first() unconditionally is slow, it takes 10 times longer due to the full linear traversal of the list. Moreover, perform garbage collection of expired elements when walking down the node list to avoid bogus overlap reports. For the insertion operation itself, this essentially reverts back to the implementation before commit 7c84d414 ("netfilter: nft_set_rbtree: Detect partial overlaps on insertion"), except that cases of complete overlap are already handled in the overlap detection phase itself, which slightly simplifies the loop to find the insertion point. Based on initial patch from Stefano Brivio, including text from the original patch description too. Fixes: 7c84d414 ("netfilter: nft_set_rbtree: Detect partial overlaps on insertion") Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pablo Neira Ayuso authored
commit 628bd3e4 upstream. set .destroy callback releases the references to other objects in maps. This is very late and it results in spurious EBUSY errors. Drop refcount from the preparation phase instead, update set backend not to drop reference counter from set .destroy path. Exceptions: NFT_TRANS_PREPARE_ERROR does not require to drop the reference counter because the transaction abort path releases the map references for each element since the set is unbound. The abort path also deals with releasing reference counter for new elements added to unbound sets. Fixes: 59105446 ("netfilter: nf_tables: revisit chain/object refcounting from elements") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pablo Neira Ayuso authored
commit f8bb7889 upstream. Rename: - nft_set_elem_activate() to nft_set_elem_data_activate(). - nft_set_elem_deactivate() to nft_set_elem_data_deactivate(). To prepare for updates in the set element infrastructure to add support for the special catch-all element. Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pablo Neira Ayuso authored
commit 0c2a85ed upstream. The patch that adds support for stateful expressions in set definitions require this. Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steven Rostedt (Google) authored
commit bb32500f upstream. The following can crash the kernel: # cd /sys/kernel/tracing # echo 'p:sched schedule' > kprobe_events # exec 5>>events/kprobes/sched/enable # > kprobe_events # exec 5>&- The above commands: 1. Change directory to the tracefs directory 2. Create a kprobe event (doesn't matter what one) 3. Open bash file descriptor 5 on the enable file of the kprobe event 4. Delete the kprobe event (removes the files too) 5. Close the bash file descriptor 5 The above causes a crash! BUG: kernel NULL pointer dereference, address: 0000000000000028 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 6 PID: 877 Comm: bash Not tainted 6.5.0-rc4-test-00008-g2c6b6b1029d4-dirty #186 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:tracing_release_file_tr+0xc/0x50 What happens here is that the kprobe event creates a trace_event_file "file" descriptor that represents the file in tracefs to the event. It maintains state of the event (is it enabled for the given instance?). Opening the "enable" file gets a reference to the event "file" descriptor via the open file descriptor. When the kprobe event is deleted, the file is also deleted from the tracefs system which also frees the event "file" descriptor. But as the tracefs file is still opened by user space, it will not be totally removed until the final dput() is called on it. But this is not true with the event "file" descriptor that is already freed. If the user does a write to or simply closes the file descriptor it will reference the event "file" descriptor that was just freed, causing a use-after-free bug. To solve this, add a ref count to the event "file" descriptor as well as a new flag called "FREED". The "file" will not be freed until the last reference is released. But the FREE flag will be set when the event is removed to prevent any more modifications to that event from happening, even if there's still a reference to the event "file" descriptor. Link: https://lore.kernel.org/linux-trace-kernel/20231031000031.1e705592@gandalf.local.home/ Link: https://lore.kernel.org/linux-trace-kernel/20231031122453.7a48b923@gandalf.local.home Cc: stable@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Fixes: f5ca233e ("tracing: Increase trace array ref count on enable and filter files") Reported-by:
Beau Belgrave <beaub@linux.microsoft.com> Tested-by:
Beau Belgrave <beaub@linux.microsoft.com> Reviewed-by:
Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by:
Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christian König authored
commit 12f76050 upstream. We should not leak the pointer where we couldn't grab the reference on to the caller because it can be that the error handling still tries to put the reference then. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kemeng Shi authored
commit 40dd7953 upstream. Wrong check of gdb backup in meta bg as following: first_group is the first group of meta_bg which contains target group, so target group is always >= first_group. We check if target group has gdb backup by comparing first_group with [group + 1] and [group + EXT4_DESC_PER_BLOCK(sb) - 1]. As group >= first_group, then [group + N] is > first_group. So no copy of gdb backup in meta bg is done in setup_new_flex_group_blocks. No need to do gdb backup copy in meta bg from setup_new_flex_group_blocks as we always copy updated gdb block to backups at end of ext4_flex_group_add as following: ext4_flex_group_add /* no gdb backup copy for meta bg any more */ setup_new_flex_group_blocks /* update current group number */ ext4_update_super sbi->s_groups_count += flex_gd->count; /* * if group in meta bg contains backup is added, the primary gdb block * of the meta bg will be copy to backup in new added group here. */ for (; gdb_num <= gdb_num_end; gdb_num++) update_backups(...) In summary, we can remove wrong gdb backup copy code in setup_new_flex_group_blocks. Signed-off-by:
Kemeng Shi <shikemeng@huaweicloud.com> Reviewed-by:
Theodore Ts'o <tytso@mit.edu> Link: https://lore.kernel.org/r/20230826174712.4059355-5-shikemeng@huaweicloud.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Zhang Yi authored
commit 40ea9839 upstream. When big allocate feature is enabled, we need to count and update reserved clusters before removing a delayed only extent_status entry. {init|count|get}_rsvd() have already done this, but the start block number of this counting isn't correct in the following case. lblk end | | v v ------------------------- | | orig_es ------------------------- ^ ^ len1 is 0 | len2 | If the start block of the orig_es entry founded is bigger than lblk, we passed lblk as start block to count_rsvd(), but the length is correct, finally, the range to be counted is offset. This patch fix this by passing the start blocks to 'orig_es->lblk + len1'. Signed-off-by:
Zhang Yi <yi.zhang@huawei.com> Cc: stable@kernel.org Link: https://lore.kernel.org/r/20230824092619.1327976-2-yi.zhang@huaweicloud.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kemeng Shi authored
commit 48f15515 upstream. Avoid to ignore error in "err". Signed-off-by:
Kemeng Shi <shikemeng@huaweicloud.com> Link: https://lore.kernel.org/r/20230826174712.4059355-4-shikemeng@huaweicloud.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kemeng Shi authored
commit 31f13421 upstream. Commit 0aeaa255 ("ext4: fix corruption when online resizing a 1K bigalloc fs") found that primary superblock's offset in its group is not equal to offset of backup superblock in its group when block size is 1K and bigalloc is enabled. As group descriptor blocks are right after superblock, we can't pass block number of gdb to update_backups for the same reason. The root casue of the issue above is that leading 1K padding block is count as data block offset for primary block while backup block has no padding block offset in its group. Remove padding data block count to fix the issue for gdb backups. For meta_bg case, update_backups treat blk_off as block number, do no conversion in this case. Signed-off-by:
Kemeng Shi <shikemeng@huaweicloud.com> Reviewed-by:
Theodore Ts'o <tytso@mit.edu> Link: https://lore.kernel.org/r/20230826174712.4059355-2-shikemeng@huaweicloud.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Max Kellermann authored
commit 484fd6c1 upstream. The function ext4_init_acl() calls posix_acl_create() which is responsible for applying the umask. But without CONFIG_EXT4_FS_POSIX_ACL, ext4_init_acl() is an empty inline function, and nobody applies the umask. This fixes a bug which causes the umask to be ignored with O_TMPFILE on ext4: https://github.com/MusicPlayerDaemon/MPD/issues/558 https://bugs.gentoo.org/show_bug.cgi?id=686142#c3 https://bugzilla.kernel.org/show_bug.cgi?id=203625 Reviewed-by:
"J. Bruce Fields" <bfields@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Max Kellermann <max.kellermann@ionos.com> Link: https://lore.kernel.org/r/20230919081824.1096619-1-max.kellermann@ionos.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Heiner Kallweit authored
commit 6a263102 upstream. This reverts commit efa5f131 . I couldn't reproduce the reported issue. What I did, based on a pcap packet log provided by the reporter: - Used same chip version (RTL8168h) - Set MAC address to the one used on the reporters system - Replayed the EAPOL unicast packet that, according to the reporter, was filtered out by the mc filter. The packet was properly received. Therefore the root cause of the reported issue seems to be somewhere else. Disabling mc filtering completely for the most common chip version is a quite big hammer. Therefore revert the change and wait for further analysis results from the reporter. Cc: stable@vger.kernel.org Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mahmoud Adam authored
commit bc1b5acb upstream. seq_release should be called to free the allocated seq_file Cc: stable@vger.kernel.org # v5.3+ Signed-off-by:
Mahmoud Adam <mngyadam@amazon.com> Reviewed-by:
Jeff Layton <jlayton@kernel.org> Fixes: 78599c42 ("nfsd4: add file to display list of client's opens") Reviewed-by:
NeilBrown <neilb@suse.de> Tested-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vikash Garodia authored
commit 8d0b8939 upstream. The hfi parser, parses the capabilities received from venus firmware and copies them to core capabilities. Consider below api, for example, fill_caps - In this api, caps in core structure gets updated with the number of capabilities received in firmware data payload. If the same api is called multiple times, there is a possibility of copying beyond the max allocated size in core caps. Similar possibilities in fill_raw_fmts and fill_profile_level functions. Cc: stable@vger.kernel.org Fixes: 1a73374a ("media: venus: hfi_parser: add common capability parser") Signed-off-by:
Vikash Garodia <quic_vgarodia@quicinc.com> Signed-off-by:
Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vikash Garodia authored
commit b18e36df upstream. Buffer requirement, for different buffer type, comes from video firmware. While copying these requirements, there is an OOB possibility when the payload from firmware is more than expected size. Fix the check to avoid the OOB possibility. Cc: stable@vger.kernel.org Fixes: 09c2845e ("[media] media: venus: hfi: add Host Firmware Interface (HFI)") Reviewed-by:
Nathan Hebert <nhebert@chromium.org> Signed-off-by:
Vikash Garodia <quic_vgarodia@quicinc.com> Signed-off-by:
Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vikash Garodia authored
commit 0768a9dd upstream. Supported codec bitmask is populated from the payload from venus firmware. There is a possible case when all the bits in the codec bitmask is set. In such case, core cap for decoder is filled and MAX_CODEC_NUM is utilized. Now while filling the caps for encoder, it can lead to access the caps array beyong 32 index. Hence leading to OOB write. The fix counts the supported encoder and decoder. If the count is more than max, then it skips accessing the caps. Cc: stable@vger.kernel.org Fixes: 1a73374a ("media: venus: hfi_parser: add common capability parser") Signed-off-by:
Vikash Garodia <quic_vgarodia@quicinc.com> Signed-off-by:
Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sean Young authored
commit 4f7efc71 upstream. The Sharp protocol[1] encoding has incorrect timings for bit space. [1] https://www.sbprojects.net/knowledge/ir/sharp.php Fixes: d35afc5f ("[media] rc: ir-sharp-decoder: Add encode capability") Cc: stable@vger.kernel.org Reported-by:
Joe Ferner <joe.m.ferner@gmail.com> Closes: https://sourceforge.net/p/lirc/mailman/message/38604507/ Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sean Young authored
commit c8a489f8 upstream. When transmitting, infrared drivers expect an odd number of samples; iow without a trailing space. No problems have been observed so far, so this is just belt and braces. Fixes: 9b619258 ("media: lirc: implement scancode sending") Cc: stable@vger.kernel.org Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Heiner Kallweit authored
commit f78ca48a upstream. Currently we set SMBHSTCNT_LAST_BYTE only after the host has started receiving the last byte. If we get e.g. preempted before setting SMBHSTCNT_LAST_BYTE, the host may be finished with receiving the byte before SMBHSTCNT_LAST_BYTE is set. Therefore change the code to set SMBHSTCNT_LAST_BYTE before writing SMBHSTSTS_BYTE_DONE for the byte before the last byte. Now the code is also consistent with what we do in i801_isr_byte_done(). Reported-by:
Jean Delvare <jdelvare@suse.com> Closes: https://lore.kernel.org/linux-i2c/20230828152747.09444625@endymion.delvare/ Cc: stable@vger.kernel.org Acked-by:
Andi Shyti <andi.shyti@kernel.org> Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Sverdlin authored
commit 5a22fbcc upstream. When LAN9303 is MDIO-connected two callchains exist into mdio->bus->write(): 1. switch ports 1&2 ("physical" PHYs): virtual (switch-internal) MDIO bus (lan9303_switch_ops->phy_{read|write})-> lan9303_mdio_phy_{read|write} -> mdiobus_{read|write}_nested 2. LAN9303 virtual PHY: virtual MDIO bus (lan9303_phy_{read|write}) -> lan9303_virt_phy_reg_{read|write} -> regmap -> lan9303_mdio_{read|write} If the latter functions just take mutex_lock(&sw_dev->device->bus->mdio_lock) it triggers a LOCKDEP false-positive splat. It's false-positive because the first mdio_lock in the second callchain above belongs to virtual MDIO bus, the second mdio_lock belongs to physical MDIO bus. Consequent annotation in lan9303_mdio_{read|write} as nested lock (similar to lan9303_mdio_phy_{read|write}, it's the same physical MDIO bus) prevents the following splat: WARNING: possible circular locking dependency detected 5.15.71 #1 Not tainted ------------------------------------------------------ kworker/u4:3/609 is trying to acquire lock: ffff000011531c68 (lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock){+.+.}-{3:3}, at: regmap_lock_mutex but task is already holding lock: ffff0000114c44d8 (&bus->mdio_lock){+.+.}-{3:3}, at: mdiobus_read which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&bus->mdio_lock){+.+.}-{3:3}: lock_acquire __mutex_lock mutex_lock_nested lan9303_mdio_read _regmap_read regmap_read lan9303_probe lan9303_mdio_probe mdio_probe really_probe __driver_probe_device driver_probe_device __device_attach_driver bus_for_each_drv __device_attach device_initial_probe bus_probe_device deferred_probe_work_func process_one_work worker_thread kthread ret_from_fork -> #0 (lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock){+.+.}-{3:3}: __lock_acquire lock_acquire.part.0 lock_acquire __mutex_lock mutex_lock_nested regmap_lock_mutex regmap_read lan9303_phy_read dsa_slave_phy_read __mdiobus_read mdiobus_read get_phy_device mdiobus_scan __mdiobus_register dsa_register_switch lan9303_probe lan9303_mdio_probe mdio_probe really_probe __driver_probe_device driver_probe_device __device_attach_driver bus_for_each_drv __device_attach device_initial_probe bus_probe_device deferred_probe_work_func process_one_work worker_thread kthread ret_from_fork other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&bus->mdio_lock); lock(lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock); lock(&bus->mdio_lock); lock(lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock); *** DEADLOCK *** 5 locks held by kworker/u4:3/609: #0: ffff000002842938 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work #1: ffff80000bacbd60 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work #2: ffff000007645178 (&dev->mutex){....}-{3:3}, at: __device_attach #3: ffff8000096e6e78 (dsa2_mutex){+.+.}-{3:3}, at: dsa_register_switch #4: ffff0000114c44d8 (&bus->mdio_lock){+.+.}-{3:3}, at: mdiobus_read stack backtrace: CPU: 1 PID: 609 Comm: kworker/u4:3 Not tainted 5.15.71 #1 Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace show_stack dump_stack_lvl dump_stack print_circular_bug check_noncircular __lock_acquire lock_acquire.part.0 lock_acquire __mutex_lock mutex_lock_nested regmap_lock_mutex regmap_read lan9303_phy_read dsa_slave_phy_read __mdiobus_read mdiobus_read get_phy_device mdiobus_scan __mdiobus_register dsa_register_switch lan9303_probe lan9303_mdio_probe ... Cc: stable@vger.kernel.org Fixes: dc700583 ("net: dsa: LAN9303: add MDIO managed mode support") Signed-off-by:
Alexander Sverdlin <alexander.sverdlin@siemens.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20231027065741.534971-1-alexander.sverdlin@siemens.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johnathan Mantey authored
commit 9e2e7efb upstream. This reverts commit 3780bb29. The cited commit introduced unwanted behavior. The intent for the commit was to be able to detect carrier loss/gain for just the NIC connected to the BMC. The unwanted effect is a carrier loss for auxiliary paths also causes the BMC to lose carrier. The BMC never regains carrier despite the secondary NIC regaining a link. This change, when merged, needs to be backported to stable kernels. 5.4-stable, 5.10-stable, 5.15-stable, 6.1-stable, 6.5-stable Fixes: 3780bb29 ("ncsi: Propagate carrier gain/loss events to the NCSI controller") CC: stable@vger.kernel.org Signed-off-by:
Johnathan Mantey <johnathanx.mantey@intel.com> Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Guan Wentao authored
[ Upstream commit da06ff1f ] Add PID/VID 0bda:b85b for Realtek RTL8852BE USB bluetooth part. The PID/VID was reported by the patch last year. [1] Some SBCs like rockpi 5B A8 module contains the device. And it`s founded in website. [2] [3] Here is the device tables in /sys/kernel/debug/usb/devices . T: Bus=07 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=b85b Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Link: https://lore.kernel.org/all/20220420052402.19049-1-tangmeng@uniontech.com/ [1] Link: https://forum.radxa.com/t/bluetooth-on-ubuntu/13051/4 [2] Link: https://ubuntuforums.org/showthread.php?t=2489527 [3] Cc: stable@vger.kernel.org Signed-off-by:
Meng Tang <tangmeng@uniontech.com> Signed-off-by:
Guan Wentao <guanwentao@uniontech.com> Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Masum Reza authored
[ Upstream commit 02be109d ] This device is used in TP-Link TX20E WiFi+Bluetooth adapter. Relevant information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=01 Lev=01 Prnt=01 Port=08 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3570 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
Masum Reza <masumrezarock100@gmail.com> Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Stable-dep-of: da06ff1f ("Bluetooth: btusb: Add 0bda:b85b for Fn-Link RTL8852BE") Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Larry Finger authored
[ Upstream commit 069f5342 ] This device is part of a Realtek RTW8852BE chip. The device table is as follows: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3571 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Stable-dep-of: da06ff1f ("Bluetooth: btusb: Add 0bda:b85b for Fn-Link RTL8852BE") Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Larry Finger authored
[ Upstream commit 730a1d1a ] This device is part of a Realtek RTW8852BE chip. The device table entry is as follows: T: Bus=03 Lev=01 Prnt=01 Port=12 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=887b Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Stable-dep-of: da06ff1f ("Bluetooth: btusb: Add 0bda:b85b for Fn-Link RTL8852BE") Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Artem Lukyanov authored
[ Upstream commit 393b4916 ] Add the support ID(0x0cb8, 0xc559) to usb_device_id table for Realtek RTL8852BE. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cb8 ProdID=c559 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
Artem Lukyanov <dukzcry@ya.ru> Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Stable-dep-of: da06ff1f ("Bluetooth: btusb: Add 0bda:b85b for Fn-Link RTL8852BE") Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Joseph Hwang authored
[ Upstream commit 33bfd94a ] This patch adds the Realtek 8822CE controller to the usb_device_id table to support the wideband speech capability. Signed-off-by:
Joseph Hwang <josephsih@chromium.org> Reviewed-by:
Alain Michaud <alainm@chromium.org> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Stable-dep-of: da06ff1f ("Bluetooth: btusb: Add 0bda:b85b for Fn-Link RTL8852BE") Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Alain Michaud authored
[ Upstream commit 3e4e3f73 ] This change adds a new flag to define a controller's wideband speech capability. This is required since no reliable over HCI mechanism exists to query the controller and driver's compatibility with wideband speech. Signed-off-by:
Alain Michaud <alainm@chromium.org> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Stable-dep-of: da06ff1f ("Bluetooth: btusb: Add 0bda:b85b for Fn-Link RTL8852BE") Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Pavel Krasavin authored
[ Upstream commit 2a1d728f ] There might be hard lockup if we set crtscts mode on port without RTS/CTS configured: # stty -F /dev/ttyAML6 crtscts; echo 1 > /dev/ttyAML6; echo 2 > /dev/ttyAML6 [ 95.890386] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 95.890857] rcu: 3-...0: (201 ticks this GP) idle=e33c/1/0x4000000000000000 softirq=5844/5846 fqs=4984 [ 95.900212] rcu: (detected by 2, t=21016 jiffies, g=7753, q=296 ncpus=4) [ 95.906972] Task dump for CPU 3: [ 95.910178] task:bash state:R running task stack:0 pid:205 ppid:1 flags:0x00000202 [ 95.920059] Call trace: [ 95.922485] __switch_to+0xe4/0x168 [ 95.925951] 0xffffff8003477508 [ 95.974379] watchdog: Watchdog detected hard LOCKUP on cpu 3 [ 95.974424] Modules linked in: 88x2cs(O) rtc_meson_vrtc Possible solution would be to not allow to setup crtscts on such port. Tested on S905X3 based board. Fixes: ff7693d0 ("ARM: meson: serial: add MesonX SoC on-chip uart driver") Cc: stable@vger.kernel.org Signed-off-by:
Pavel Krasavin <pkrasavin@imaqliq.com> Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by:
Dmitry Rokosov <ddrokosov@salutedevices.com> v6: stable tag added v5: https://lore.kernel.org/lkml/OF43DA36FF.2BD3BB21-ON00258A47.005A8125-00258A47.005A9513@gdc.ru/ added missed Reviewed-by tags, Fixes tag added according to Dmitry and Neil notes v4: https://lore.kernel.org/lkml/OF55521400.7512350F-ON00258A47.003F7254-00258A47.0040E15C@gdc.ru/ More correct patch subject according to Jiri's note v3: https://lore.kernel.org/lkml/OF6CF5FFA0.CCFD0E8E-ON00258A46.00549EDF-00258A46.0054BB62@gdc.ru/ "From:" line added to the mail v2: https://lore.kernel.org/lkml/OF950BEF72.7F425944-ON00258A46.00488A76-00258A46.00497D44@gdc.ru/ braces for single statement removed according to Dmitry's note v1: https://lore.kernel.org/lkml/OF28B2B8C9.5BC0CD28-ON00258A46.0037688F-00258A46.0039155B@gdc.ru/ Link: https://lore.kernel.org/r/OF66360032.51C36182-ON00258A48.003F656B-00258A48.0040092C@gdc.ru Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Lad Prabhakar authored
[ Upstream commit 5b680619 ] platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20211224142917.6966-5-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 2a1d728f ("tty: serial: meson: fix hard LOCKUP on crtscts mode") Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Neil Armstrong authored
[ Upstream commit 27d44e05 ] Now the DT bindings has a property to get the FIFO size for a particular port, retrieve it and use to setup the FIFO interrupts threshold. Reviewed-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20210518075833.3736038-3-narmstrong@baylibre.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 2a1d728f ("tty: serial: meson: fix hard LOCKUP on crtscts mode") Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Colin Ian King authored
[ Upstream commit 021212f5 ] The variable id being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Since id is just being used in a for-loop inside a local scope, move the declaration of id to that scope. Reviewed-by:
Kevin Hilman <khilman@baylibre.com> Reviewed-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
Colin Ian King <colin.king@canonical.com> Addresses-Coverity: ("Unused value") Link: https://lore.kernel.org/r/20210426101106.9122-1-colin.king@canonical.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 2a1d728f ("tty: serial: meson: fix hard LOCKUP on crtscts mode") Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Chandradeep Dey authored
commit 713f040c upstream. Apply the already existing quirk chain ALC294_FIXUP_ASUS_SPK to enable the internal speaker of ASUS K6500ZC. Signed-off-by:
Chandradeep Dey <codesigning@chandradeepdey.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/NizcVHQ--3-9@chandradeepdey.com Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit c7a60651 upstream. As reported recently, ALSA core info helper may cause a deadlock at the forced device disconnection during the procfs operation. The proc_remove() (that is called from the snd_card_disconnect() helper) has a synchronization of the pending procfs accesses via wait_for_completion(). Meanwhile, ALSA procfs helper takes the global mutex_lock(&info_mutex) at both the proc_open callback and snd_card_info_disconnect() helper. Since the proc_open can't finish due to the mutex lock, wait_for_completion() never returns, either, hence it deadlocks. TASK#1 TASK#2 proc_reg_open() takes use_pde() snd_info_text_entry_open() snd_card_disconnect() snd_info_card_disconnect() takes mutex_lock(&info_mutex) proc_remove() wait_for_completion(unused_pde) ... waiting task#1 closes mutex_lock(&info_mutex) => DEADLOCK This patch is a workaround for avoiding the deadlock scenario above. The basic strategy is to move proc_remove() call outside the mutex lock. proc_remove() can work gracefully without extra locking, and it can delete the tree recursively alone. So, we call proc_remove() at snd_info_card_disconnection() at first, then delete the rest resources recursively within the info_mutex lock. After the change, the function snd_info_disconnect() doesn't do disconnection by itself any longer, but it merely clears the procfs pointer. So rename the function to snd_info_clear_entries() for avoiding confusion. The similar change is applied to snd_info_free_entry(), too. Since the proc_remove() is called only conditionally with the non-NULL entry->p, it's skipped after the snd_info_clear_entries() call. Reported-by:
Shinhyung Kang <s47.kang@samsung.com> Closes: https://lore.kernel.org/r/664457955.21699345385931.JavaMail.epsvc@epcpadp4 Reviewed-by:
Jaroslav Kysela <perex@perex.cz> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20231109141954.4283-1-tiwai@suse.de Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Helge Deller authored
commit 166b0110 upstream. When calculating the pfn for the iitlbt/idtlbt instruction, do not drop the upper 5 address bits. This doesn't seem to have an effect on physical hardware which uses less physical address bits, but in qemu the missing bits are visible. Signed-off-by:
Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-