Do run task_work before io_uring_register(), that might make a first
quiesce round much nicer. We generally do that for any syscall invocation
to avoid spurious -EINTR/-ERESTARTSYS, for task_work that we generate.
This patch brings io_uring_register() inline with the two other io_uring
syscalls.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

sqe->flags are subset of req flags, so incorrectly copied may span into
in-kernel flags and wreck havoc, e.g. by setting REQ_F_INFLIGHT.

Fixes: 5be9ad1e

 ("io_uring: optimise io_init_req() flags setting")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

There is a short window where percpu_refs are already turned zero, but
we try to do resurrect(). Play nicer and wait for ->release() to happen
in this case and proceed as everything is ok. One downside for ctx refs
is that we can ignore signal_pending() on a rare occasion, but someone
else should check for it later if needed.

Cc: <stable@vger.kernel.org> # 5.5+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_rsrc_ref_quiesce() is a generic resource function, though now it
was wired to allocate and initialise ref nodes with file-specific
callbacks/etc. Keep it sane by passing in as a parameters everything we
need for initialisations, otherwise it will hurt us badly one day.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

After a rsrc/files reference node's refs are killed, it must never be
used. And that's how it works, it either assigns a new node or kills the
whole data table.

Let's explicitly NULL it, that shouldn't be necessary, but if something
would go wrong I'd rather catch a NULL dereference to using a dangling
pointer.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

With the prep and prep async split, we now have potentially 3 helpers
that need to be defined for !CONFIG_NET. Add some helpers to do just
that.

Fixes the following compile error on !CONFIG_NET:

fs/io_uring.c:6171:10: error: implicit declaration of function
'io_sendmsg_prep_async'; did you mean 'io_req_prep_async'?
[-Werror=implicit-function-declaration]
   return io_sendmsg_prep_async(req);
             ^~~~~~~~~~~~~~~~~~~~~
	     io_req_prep_async

Fixes: 93642ef8

 ("io_uring: split sqe-prep and async setup")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Abaci reported the below issue:
[  141.400455] hrtimer: interrupt took 205853 ns
[  189.869316] process 'usr/local/ilogtail/ilogtail_0.16.26' started with executable stack
[  250.188042]
[  250.188327] ============================================
[  250.189015] WARNING: possible recursive locking detected
[  250.189732] 5.11.0-rc4 #1 Not tainted
[  250.190267] --------------------------------------------
[  250.190917] a.out/7363 is trying to acquire lock:
[  250.191506] ffff888114dbcbe8 (&ctx->uring_lock){+.+.}-{3:3}, at: __io_req_task_submit+0x29/0xa0
[  250.192599]
[  250.192599] but task is already holding lock:
[  250.193309] ffff888114dbfbe8 (&ctx->uring_lock){+.+.}-{3:3}, at: __x64_sys_io_uring_register+0xad/0x210
[  250.194426]
[  250.194426] other info that might help us debug this:
[  250.195238]  Possible unsafe locking scenario:
[  250.195238]
[  250.196019]        CPU0
[  250.196411]        ----
[  250.196803]   lock(&ctx->uring_lock);
[  250.197420]   lock(&ctx->uring_lock);
[  250.197966]
[  250.197966]  *** DEADLOCK ***
[  250.197966]
[  250.198837]  May be due to missing lock nesting notation
[  250.198837]
[  250.199780] 1 lock held by a.out/7363:
[  250.200373]  #0: ffff888114dbfbe8 (&ctx->uring_lock){+.+.}-{3:3}, at: __x64_sys_io_uring_register+0xad/0x210
[  250.201645]
[  250.201645] stack backtrace:
[  250.202298] CPU: 0 PID: 7363 Comm: a.out Not tainted 5.11.0-rc4 #1
[  250.203144] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[  250.203887] Call Trace:
[  250.204302]  dump_stack+0xac/0xe3
[  250.204804]  __lock_acquire+0xab6/0x13a0
[  250.205392]  lock_acquire+0x2c3/0x390
[  250.205928]  ? __io_req_task_submit+0x29/0xa0
[  250.206541]  __mutex_lock+0xae/0x9f0
[  250.207071]  ? __io_req_task_submit+0x29/0xa0
[  250.207745]  ? 0xffffffffa0006083
[  250.208248]  ? __io_req_task_submit+0x29/0xa0
[  250.208845]  ? __io_req_task_submit+0x29/0xa0
[  250.209452]  ? __io_req_task_submit+0x5/0xa0
[  250.210083]  __io_req_task_submit+0x29/0xa0
[  250.210687]  io_async_task_func+0x23d/0x4c0
[  250.211278]  task_work_run+0x89/0xd0
[  250.211884]  io_run_task_work_sig+0x50/0xc0
[  250.212464]  io_sqe_files_unregister+0xb2/0x1f0
[  250.213109]  __io_uring_register+0x115a/0x1750
[  250.213718]  ? __x64_sys_io_uring_register+0xad/0x210
[  250.214395]  ? __fget_files+0x15a/0x260
[  250.214956]  __x64_sys_io_uring_register+0xbe/0x210
[  250.215620]  ? trace_hardirqs_on+0x46/0x110
[  250.216205]  do_syscall_64+0x2d/0x40
[  250.216731]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  250.217455] RIP: 0033:0x7f0fa17e5239
[  250.218034] Code: 01 00 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05  3d 01 f0 ff ff 73 01 c3 48 8b 0d 27 ec 2c 00 f7 d8 64 89 01 48
[  250.220343] RSP: 002b:00007f0fa1eeac48 EFLAGS: 00000246 ORIG_RAX: 00000000000001ab
[  250.221360] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f0fa17e5239
[  250.222272] RDX: 0000000000000000 RSI: 0000000000000003 RDI: 0000000000000008
[  250.223185] RBP: 00007f0fa1eeae20 R08: 0000000000000000 R09: 0000000000000000
[  250.224091] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[  250.224999] R13: 0000000000021000 R14: 0000000000000000 R15: 00007f0fa1eeb700

This is caused by calling io_run_task_work_sig() to do work under
uring_lock while the caller io_sqe_files_unregister() already held
uring_lock.
To fix this issue, briefly drop uring_lock when calling
io_run_task_work_sig(), and there are two things to concern:

- hold uring_lock in io_ring_ctx_free() around io_sqe_files_unregister()
    this is for consistency of lock/unlock.
- add new fixed rsrc ref node before dropping uring_lock
    it's not safe to do io_uring_enter-->percpu_ref_get() with a dying one.
- check if rsrc_data->refs is dying to avoid parallel io_sqe_files_unregister

Reported-by: Abaci <abaci@linux.alibaba.com>
Fixes: 1ffc5422

 ("io_uring: fix io_sqe_files_unregister() hangs")
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
[axboe: fixes from Pavel folded in]
Signed-off-by: Jens Axboe <axboe@kernel.dk>

In case of failure io_wq_submit_work() needs to post an CQE and so
potentially take uring_lock. The safest way to deal with it is to do
that from under task_work where we can safely take the lock.

Also, as io_iopoll_check() holds the lock tight and releases it
reluctantly, it will play nicer in the furuter with notifying an
iopolling task about new such pending failed requests.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

[   97.866748] a.out/2890 is trying to acquire lock:
[   97.867829] ffff8881046763e8 (&ctx->uring_lock){+.+.}-{3:3}, at:
io_wq_submit_work+0x155/0x240
[   97.869735]
[   97.869735] but task is already holding lock:
[   97.871033] ffff88810dfe0be8 (&ctx->uring_lock){+.+.}-{3:3}, at:
__x64_sys_io_uring_enter+0x3f0/0x5b0
[   97.873074]
[   97.873074] other info that might help us debug this:
[   97.874520]  Possible unsafe locking scenario:
[   97.874520]
[   97.875845]        CPU0
[   97.876440]        ----
[   97.877048]   lock(&ctx->uring_lock);
[   97.877961]   lock(&ctx->uring_lock);
[   97.878881]
[   97.878881]  *** DEADLOCK ***
[   97.878881]
[   97.880341]  May be due to missing lock nesting notation
[   97.880341]
[   97.881952] 1 lock held by a.out/2890:
[   97.882873]  #0: ffff88810dfe0be8 (&ctx->uring_lock){+.+.}-{3:3}, at:
__x64_sys_io_uring_enter+0x3f0/0x5b0
[   97.885108]
[   97.885108] stack backtrace:
[   97.890457] Call Trace:
[   97.891121]  dump_stack+0xac/0xe3
[   97.891972]  __lock_acquire+0xab6/0x13a0
[   97.892940]  lock_acquire+0x2c3/0x390
[   97.894894]  __mutex_lock+0xae/0x9f0
[   97.901101]  io_wq_submit_work+0x155/0x240
[   97.902112]  io_wq_cancel_cb+0x162/0x490
[   97.904126]  io_async_find_and_cancel+0x3b/0x140
[   97.905247]  io_issue_sqe+0x86d/0x13e0
[   97.909122]  __io_queue_sqe+0x10b/0x550
[   97.913971]  io_queue_sqe+0x235/0x470
[   97.914894]  io_submit_sqes+0xcce/0xf10
[   97.917872]  __x64_sys_io_uring_enter+0x3fb/0x5b0
[   97.921424]  do_syscall_64+0x2d/0x40
[   97.922329]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

While holding uring_lock, e.g. from inline execution, async cancel
request may attempt cancellations through io_wq_submit_work, which may
try to grab a lock. Delay it to task_work, so we do it from a clean
context and don't have to worry about locking.

Cc: <stable@vger.kernel.org> # 5.5+
Fixes: c07e6719

 ("io_uring: hold uring_lock while completing failed polled io in io_wq_submit_work()")
Reported-by: Abaci <abaci@linux.alibaba.com>
Reported-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Instead of marking a link with REQ_F_FAIL_LINK on an error and delaying
its failing to the caller, do it eagerly right when after getting an
error in io_submit_sqe(). This renders FAIL_LINK checks in
io_queue_link_head() useless and we can skip it.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Now, as we can do async setup without holding an SQE, we can skip doing
io_req_defer_prep() for link heads, it will be tried to be executed
inline and follows all the rules of the non-linked requests.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Now as preparations are split from async setup, we can do the first one
pretty early not spilling it across multiple call sites. And after it's
done SQE is not needed anymore and we can save on passing it deeply into
the submission stack.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

There are two kinds of opcode-specific preparations we do. The first is
just initialising req with what is always needed for an opcode and
reading all non-generic SQE fields. And the second is copying some of
the stuff like iovec preparing to punt a request to somewhere async,
e.g. to io-wq or for draining. For requests that have tried an inline
execution but still needing to be punted, the second prep type is done
by the opcode handler itself.

Currently, we don't explicitly split those preparation steps, but
combining both of them into io_*_prep(), altering the behaviour by
allocating ->async_data. That's pretty messy and hard to follow and also
gets in the way of some optimisations.

Split the steps, leave the first type as where it is now, and put the
second into a new io_req_prep_async() helper. It may make us to do opcode
switch twice, but it's worth it.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

If we get an error in io_init_req() for a request that would have been
linked, we break the submission but still issue a partially composed
link, that's nasty, fail it instead.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Move struct io_submit_link into submit_state, which is a part of a
submission state and so belongs to it. It saves us from explicitly
passing it, and init/deinit is now nicely hidden in
io_submit_state_[start,end].

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Behaves identically, just move io_init_req() call into the beginning of
io_submit_sqes(). That looks better unloads io_submit_sqes().

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

A preparation patch, symbol to symbol move io_init_req() +
io_check_restriction() a bit up. The submission path is pretty settled
down, so don't worry about backports and move the functions instead of
relying on forward declarations in the future.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

IORING_OP_SYNC_FILE_RANGE is marked as .needs_file, so the common path
will take care of assigning and validating req->file, no need to
duplicate it in io_sfr_prep().

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Follow io_*_prep() naming pattern, there are only fsync and sfr that
don't do that.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

@i and @submitted are very much coupled together, and there is no need
to keep them both. Remove @i, it doesn't change generated binary but
helps to keep a single source of truth.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Don't forget to free iovec read inline completion and bunch of other
cases that do "goto done" before setting up an async context.

Fixes: 5ea5dd45

 ("io_uring: inline io_read()'s iovec freeing")
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We add task_work from any context, hence we need to ensure that we can
tolerate it being from IRQ context as well.

Fixes: 7cbf1722

 ("io_uring: provide FIFO ordering for task_work")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

If this is attempted by an io-wq kthread, then return -EOPNOTSUPP as we
don't currently support that. Once we can get task_pid_ptr() doing the
right thing, then this can go away again.

Use PF_IO_WORKER for this to speciically target the io_uring workers.
Modify the /proc/self/ check to use PF_IO_WORKER as well.

Cc: stable@vger.kernel.org
Fixes: 8d4c3e76

 ("proc: don't allow async path resolution of /proc/self components")
Reported-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Be nice and prune these upfront, in case the ring is being shared and
one of the tasks is going away. This is a bit more important now that
we account the allocations.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

We have three different ones, put it in a helper for easy calling. This
is in preparation for doing it outside of ring freeing as well. With
that in mind, also ensure that we do the proper locking for safe calling
from a context where the ring it still live.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

No changes in this patch, just allows a caller to pass in a targeted
task that we must match for freeing requests in the cache.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

By default, kernel threads have init_fs and init_files assigned. In the
past, this has triggered security problems, as commands that don't ask
for (and hence don't get assigned) fs/files from the originating task
can then attempt path resolution etc with access to parts of the system
they should not be able to.

Rather than add checks in the fs code for misuse, just set these to
NULL. If we do attempt to use them, then the resulting code will oops
rather than provide access to something that it should not permit.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Invalid req->flags are tolerated by free/put well, avoid this dancing
needlessly presetting it to zero, and then not even resetting but
modifying it, i.e. "|=".

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Indirectly io_req_find_next() is called for every request, optimise the
check by testing flags as it was long before -- __io_req_find_next()
tolerates false-positives well (i.e. link==NULL), and those should be
really rare.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_sq_thread_acquire_mm_files() can find a PF_EXITING task only when
it's called from task_work context. Don't check it in all other cases,
that are when we're in io_uring_enter().

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Remove io_consume_sqe() and inline it back into io_get_sqe(). It
requires req dealloc on error, but in exchange we get cleaner
io_submit_sqes() and better locality for cached_sq_head.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Do a little trick in io_ring_ctx_free() briefly taking uring_lock, that
will wait for everyone currently holding it, so we can skip pinning ctx
with ctx->refs for __io_req_task_submit(), which is executed and loses
its refs/reqs while holding the lock.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Don't hand code io_req_task_queue() inside of io_async_buf_func(), just
call it.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

There are two reasons for this. First is to optimise
io_sq_thread_acquire_mm_files() for non-SQPOLL case, which currently do
too many checks and function calls in the hot path, e.g. in
io_init_req().

The second is to not grab mm/files when there are not needed. As
__io_queue_sqe() issues only one request now, we can reuse
io_sq_thread_acquire_mm_files() instead of unconditional acquire
mm/files.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

__io_queue_sqe() tries to issue as much requests of a link as it can,
and uses io_put_req_find_next() to extract a next one, targeting inline
completed requests. As now __io_queue_sqe() is always used together with
struct io_comp_state, it leaves next propagation only a small window and
only for async reqs, that doesn't justify its existence.

Remove it, make __io_queue_sqe() to issue only a head request. It
simplifies the code and will allow other optimisations.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Completion and submission states are now coupled together, it's weird to
get one from argument and another from ctx, do it consistently for
io_req_free_batch(). It's also faster as we already have @state cached
in registers.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

__io_complete_rw() casts request to kiocb for it to be immediately
container_of()'ed by io_complete_rw_common(). And the last function's name
doesn't do a great job of illuminating its purposes, so just inline it in
its only user.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We pass return code into io_rw_reissue() only to be able to check if it's
-EAGAIN. That's not the cleanest approach and may prevent inlining of the
non-EAGAIN fast path, so do it at call sites.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Don't stash -EAGAIN'ed iopoll requests into a list to reissue it later,
do it eagerly. It removes overhead on keeping and checking that list,
and allows in case of failure for these requests to be completed through
normal iopoll completion path.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_req_free_batch_finish() is final and does not permit struct req_batch
to be reused without re-init. To be more consistent don't clear ->task
there.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>