- May 04, 2020
-
-
Mike Marciniszyn authored
commit be863834 upstream. Cleaning up a pq can result in the following warning and panic: WARNING: CPU: 52 PID: 77418 at lib/list_debug.c:53 __list_del_entry+0x63/0xd0 list_del corruption, ffff88cb2c6ac068->next is LIST_POISON1 (dead000000000100) Modules linked in: mmfs26(OE) mmfslinux(OE) tracedev(OE) 8021q garp mrp ib_isert iscsi_target_mod target_core_mod crc_t10dif crct10dif_generic opa_vnic rpcrdma ib_iser libiscsi scsi_transport_iscsi ib_ipoib(OE) bridge stp llc iTCO_wdt iTCO_vendor_support intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crct10dif_pclmul crct10dif_common crc32_pclmul ghash_clmulni_intel ast aesni_intel ttm lrw gf128mul glue_helper ablk_helper drm_kms_helper cryptd syscopyarea sysfillrect sysimgblt fb_sys_fops drm pcspkr joydev lpc_ich mei_me drm_panel_orientation_quirks i2c_i801 mei wmi ipmi_si ipmi_devintf ipmi_msghandler nfit libnvdimm acpi_power_meter acpi_pad hfi1(OE) rdmavt(OE) rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_core binfmt_misc numatools(OE) xpmem(OE) ip_tables nfsv3 nfs_acl nfs lockd grace sunrpc fscache igb ahci i2c_algo_bit libahci dca ptp libata pps_core crc32c_intel [last unloaded: i2c_algo_bit] CPU: 52 PID: 77418 Comm: pvbatch Kdump: loaded Tainted: G OE ------------ 3.10.0-957.38.3.el7.x86_64 #1 Hardware name: HPE.COM HPE SGI 8600-XA730i Gen10/X11DPT-SB-SG007, BIOS SBED1229 01/22/2019 Call Trace: [<ffffffff90365ac0>] dump_stack+0x19/0x1b [<ffffffff8fc98b78>] __warn+0xd8/0x100 [<ffffffff8fc98bff>] warn_slowpath_fmt+0x5f/0x80 [<ffffffff8ff970c3>] __list_del_entry+0x63/0xd0 [<ffffffff8ff9713d>] list_del+0xd/0x30 [<ffffffff8fddda70>] kmem_cache_destroy+0x50/0x110 [<ffffffffc0328130>] hfi1_user_sdma_free_queues+0xf0/0x200 [hfi1] [<ffffffffc02e2350>] hfi1_file_close+0x70/0x1e0 [hfi1] [<ffffffff8fe4519c>] __fput+0xec/0x260 [<ffffffff8fe453fe>] ____fput+0xe/0x10 [<ffffffff8fcbfd1b>] task_work_run+0xbb/0xe0 [<ffffffff8fc2bc65>] do_notify_resume+0xa5/0xc0 [<ffffffff90379134>] int_signal+0x12/0x17 BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: [<ffffffff8fe1f93e>] kmem_cache_close+0x7e/0x300 PGD 2cdab19067 PUD 2f7bfdb067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: mmfs26(OE) mmfslinux(OE) tracedev(OE) 8021q garp mrp ib_isert iscsi_target_mod target_core_mod crc_t10dif crct10dif_generic opa_vnic rpcrdma ib_iser libiscsi scsi_transport_iscsi ib_ipoib(OE) bridge stp llc iTCO_wdt iTCO_vendor_support intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crct10dif_pclmul crct10dif_common crc32_pclmul ghash_clmulni_intel ast aesni_intel ttm lrw gf128mul glue_helper ablk_helper drm_kms_helper cryptd syscopyarea sysfillrect sysimgblt fb_sys_fops drm pcspkr joydev lpc_ich mei_me drm_panel_orientation_quirks i2c_i801 mei wmi ipmi_si ipmi_devintf ipmi_msghandler nfit libnvdimm acpi_power_meter acpi_pad hfi1(OE) rdmavt(OE) rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_core binfmt_misc numatools(OE) xpmem(OE) ip_tables nfsv3 nfs_acl nfs lockd grace sunrpc fscache igb ahci i2c_algo_bit libahci dca ptp libata pps_core crc32c_intel [last unloaded: i2c_algo_bit] CPU: 52 PID: 77418 Comm: pvbatch Kdump: loaded Tainted: G W OE ------------ 3.10.0-957.38.3.el7.x86_64 #1 Hardware name: HPE.COM HPE SGI 8600-XA730i Gen10/X11DPT-SB-SG007, BIOS SBED1229 01/22/2019 task: ffff88cc26db9040 ti: ffff88b5393a8000 task.ti: ffff88b5393a8000 RIP: 0010:[<ffffffff8fe1f93e>] [<ffffffff8fe1f93e>] kmem_cache_close+0x7e/0x300 RSP: 0018:ffff88b5393abd60 EFLAGS: 00010287 RAX: 0000000000000000 RBX: ffff88cb2c6ac000 RCX: 0000000000000003 RDX: 0000000000000400 RSI: 0000000000000400 RDI: ffffffff9095b800 RBP: ffff88b5393abdb0 R08: ffffffff9095b808 R09: ffffffff8ff77c19 R10: ffff88b73ce1f160 R11: ffffddecddde9800 R12: ffff88cb2c6ac000 R13: 000000000000000c R14: ffff88cf3fdca780 R15: 0000000000000000 FS: 00002aaaaab52500(0000) GS:ffff88b73ce00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 0000002d27664000 CR4: 00000000007607e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: [<ffffffff8fe20d44>] __kmem_cache_shutdown+0x14/0x80 [<ffffffff8fddda78>] kmem_cache_destroy+0x58/0x110 [<ffffffffc0328130>] hfi1_user_sdma_free_queues+0xf0/0x200 [hfi1] [<ffffffffc02e2350>] hfi1_file_close+0x70/0x1e0 [hfi1] [<ffffffff8fe4519c>] __fput+0xec/0x260 [<ffffffff8fe453fe>] ____fput+0xe/0x10 [<ffffffff8fcbfd1b>] task_work_run+0xbb/0xe0 [<ffffffff8fc2bc65>] do_notify_resume+0xa5/0xc0 [<ffffffff90379134>] int_signal+0x12/0x17 Code: 00 00 ba 00 04 00 00 0f 4f c2 3d 00 04 00 00 89 45 bc 0f 84 e7 01 00 00 48 63 45 bc 49 8d 04 c4 48 89 45 b0 48 8b 80 c8 00 00 00 <48> 8b 78 10 48 89 45 c0 48 83 c0 10 48 89 45 d0 48 8b 17 48 39 RIP [<ffffffff8fe1f93e>] kmem_cache_close+0x7e/0x300 RSP <ffff88b5393abd60> CR2: 0000000000000010 The panic is the result of slab entries being freed during the destruction of the pq slab. The code attempts to quiesce the pq, but looking for n_req == 0 doesn't account for new requests. Fix the issue by using SRCU to get a pq pointer and adjust the pq free logic to NULL the fd pq pointer prior to the quiesce. Fixes: e87473bc ("IB/hfi1: Only set fd pointer when base context is completely initialized") Link: https://lore.kernel.org/r/20200210131033.87408.81174.stgit@awfm-01.aw.intel.com Reviewed-by:
Kaike Wan <kaike.wan@intel.com> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Kaike Wan authored
commit a70ed0f2 upstream. Each user context is allocated a certain number of RcvArray (TID) entries and these entries are managed through TID groups. These groups are put into one of three lists in each user context: tid_group_list, tid_used_list, and tid_full_list, depending on the number of used TID entries within each group. When TID packets are expected, one or more TID groups will be allocated. After the packets are received, the TID groups will be freed. Since multiple user threads may access the TID groups simultaneously, a mutex exp_mutex is used to synchronize the access. However, when the user file is closed, it tries to release all TID groups without acquiring the mutex first, which risks a race condition with another thread that may be releasing its TID groups, leading to data corruption. This patch addresses the issue by acquiring the mutex first before releasing the TID groups when the file is closed. Fixes: 3abb33ac ("staging/hfi1: Add TID cache receive init and free funcs") Link: https://lore.kernel.org/r/20200210131026.87408.86853.stgit@awfm-01.aw.intel.com Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Kaike Wan <kaike.wan@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Yi Zhang authored
commit f25372ff upstream. nvme fw-activate operation will get bellow warning log, fix it by update the parameter order [ 113.231513] nvme nvme0: Get FW SLOT INFO log error Fixes: 0e98719b ("nvme: simplify the API for getting log pages") Reported-by:
Sujith Pandel <sujith_pandel@dell.com> Reviewed-by:
David Milburn <dmilburn@redhat.com> Signed-off-by:
Yi Zhang <yi.zhang@redhat.com> Signed-off-by:
Keith Busch <kbusch@kernel.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Daniel Vetter authored
commit 4b848f20 upstream. There's two references floating around here (for the object reference, not the handle_count reference, that's a different thing): - The temporary reference held by vgem_gem_create, acquired by creating the object and released by calling drm_gem_object_put_unlocked. - The reference held by the object handle, created by drm_gem_handle_create. This one generally outlives the function, except if a 2nd thread races with a GEM_CLOSE ioctl call. So usually everything is correct, except in that race case, where the access to gem_object->size could be looking at freed data already. Which again isn't a real problem (userspace shot its feet off already with the race, we could return garbage), but maybe someone can exploit this as an information leak. Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Hillf Danton <hdanton@sina.com> Reported-by:
<syzbot+0dc4444774d419e916c8@syzkaller.appspotmail.com> Cc: stable@vger.kernel.org Cc: Emil Velikov <emil.velikov@collabora.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sean Paul <seanpaul@chromium.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Eric Anholt <eric@anholt.net> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Rob Clark <robdclark@chromium.org> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200202132133.1891846-1-daniel.vetter@ffwll.ch Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Christian Borntraeger authored
commit 27dc0700 upstream. The query parameter block might contain additional information and can be extended in the future. If the size of the block does not suffice we get an error code of rc=0x100. The buffer will contain all information up to the specified size and the hypervisor/guest simply do not need the additional information as they do not know about the new data. That means that we can (and must) accept rc=0x100 as success. Cc: stable@vger.kernel.org Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Fixes: 5abb9351 ("s390/uv: introduce guest side ultravisor code") Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Kim Phillips authored
commit 25d38728 upstream. Commit 3fe3331b ("perf/x86/amd: Add event map for AMD Family 17h"), claimed L2 misses were unsupported, due to them not being found in its referenced documentation, whose link has now moved [1]. That old documentation listed PMCx064 unit mask bit 3 as: "LsRdBlkC: LS Read Block C S L X Change to X Miss." and bit 0 as: "IcFillMiss: IC Fill Miss" We now have new public documentation [2] with improved descriptions, that clearly indicate what events those unit mask bits represent: Bit 3 now clearly states: "LsRdBlkC: Data Cache Req Miss in L2 (all types)" and bit 0 is: "IcFillMiss: Instruction Cache Req Miss in L2." So we can now add support for L2 misses in perf's genericised events as PMCx064 with both the above unit masks. [1] The commit's original documentation reference, "Processor Programming Reference (PPR) for AMD Family 17h Model 01h, Revision B1 Processors", originally available here: https://www.amd.com/system/files/TechDocs/54945_PPR_Family_17h_Models_00h-0Fh.pdf is now available here: https://developer.amd.com/wordpress/media/2017/11/54945_PPR_Family_17h_Models_00h-0Fh.pdf [2] "Processor Programming Reference (PPR) for Family 17h Model 31h, Revision B0 Processors", available here: https://developer.amd.com/wp-content/resources/55803_0.54-PUB.pdf Fixes: 3fe3331b ("perf/x86/amd: Add event map for AMD Family 17h") Reported-by:
Babu Moger <babu.moger@amd.com> Signed-off-by:
Kim Phillips <kim.phillips@amd.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Tested-by:
Babu Moger <babu.moger@amd.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200121171232.28839-1-kim.phillips@amd.com Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Sean Christopherson authored
commit 148d735e upstream. Hardcode the EPT page-walk level for L2 to be 4 levels, as KVM's MMU currently also hardcodes the page walk level for nested EPT to be 4 levels. The L2 guest is all but guaranteed to soft hang on its first instruction when L1 is using EPT, as KVM will construct 4-level page tables and then tell hardware to use 5-level page tables. Fixes: 855feb67 ("KVM: MMU: Add 5 level EPT & Shadow page table support.") Cc: stable@vger.kernel.org Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Ronnie Sahlberg authored
commit 85db6b7a upstream. RHBZ: 1752437 Before we add a new EA we should check that this will not overflow the maximum buffer we have available to read the EAs back. Otherwise we can get into a situation where the EAs are so big that we can not read them back to the client and thus we can not list EAs anymore or delete them. Signed-off-by:
Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by:
Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Chuck Lever authored
commit ca1c6713 upstream. The @nents value that was passed to ib_dma_map_sg() has to be passed to the matching ib_dma_unmap_sg() call. If ib_dma_map_sg() choses to concatenate sg entries, it will return a different nents value than it was passed. The bug was exposed by recent changes to the AMD IOMMU driver, which enabled sg entry concatenation. Looking all the way back to commit 4143f34e ("xprtrdma: Port to new memory registration API") and reviewing other kernel ULPs, it's not clear that the frwr_map() logic was ever correct for this case. Reported-by:
Andre Tomt <andre@tomt.net> Suggested-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Cc: stable@vger.kernel.org Reviewed-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Paul Thomas authored
commit c3afa804 upstream. Care is taken with "index", however with the current version the actual xgpio_writereg is using index for data but xgpio_regoffset(chip, i) for the offset. And since i is already incremented it is incorrect. This patch fixes it so that index is used for the offset too. Cc: stable@vger.kernel.org Signed-off-by:
Paul Thomas <pthomas8589@gmail.com> Link: https://lore.kernel.org/r/20200125221410.8022-1-pthomas8589@gmail.com Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Krzysztof Kozlowski authored
commit e383e871 upstream. The CONFIG_ARCH_REQUIRE_GPIOLIB is gone since commit 65053e1a ("gpio: delete ARCH_[WANTS_OPTIONAL|REQUIRE]_GPIOLIB") and all platforms should explicitly select GPIOLIB to have it. Link: https://lore.kernel.org/r/20200130195525.4525-1-krzk@kernel.org Cc: <stable@vger.kernel.org> Fixes: 65053e1a ("gpio: delete ARCH_[WANTS_OPTIONAL|REQUIRE]_GPIOLIB") Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
David Sterba authored
commit 10a3a3ed upstream. A remount to a read-write filesystem is not safe when there's tree-log to be replayed. Files that could be opened until now might be affected by the changes in the tree-log. A regular mount is needed to replay the log so the filesystem presents the consistent view with the pending changes included. CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
David Sterba authored
commit e8294f2f upstream. There's no logged information about tree-log replay although this is something that points to previous unclean unmount. Other filesystems report that as well. Suggested-by:
Chris Murphy <lists@colorremedies.com> CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Wenwen Wang authored
commit f311ade3 upstream. In btrfs_ref_tree_mod(), 'ref' and 'ra' are allocated through kzalloc() and kmalloc(), respectively. In the following code, if an error occurs, the execution will be redirected to 'out' or 'out_unlock' and the function will be exited. However, on some of the paths, 'ref' and 'ra' are not deallocated, leading to memory leaks. For example, if 'action' is BTRFS_ADD_DELAYED_EXTENT, add_block_entry() will be invoked. If the return value indicates an error, the execution will be redirected to 'out'. But, 'ref' is not deallocated on this path, causing a memory leak. To fix the above issues, deallocate both 'ref' and 'ra' before exiting from the function when an error is encountered. CC: stable@vger.kernel.org # 4.15+ Signed-off-by:
Wenwen Wang <wenwen@cs.uga.edu> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Filipe Manana authored
commit ac05ca91 upstream. We have a few cases where we allow an extent map that is in an extent map tree to be merged with other extents in the tree. Such cases include the unpinning of an extent after the respective ordered extent completed or after logging an extent during a fast fsync. This can lead to subtle and dangerous problems because when doing the merge some other task might be using the same extent map and as consequence see an inconsistent state of the extent map - for example sees the new length but has seen the old start offset. With luck this triggers a BUG_ON(), and not some silent bug, such as the following one in __do_readpage(): $ cat -n fs/btrfs/extent_io.c 3061 static int __do_readpage(struct extent_io_tree *tree, 3062 struct page *page, (...) 3127 em = __get_extent_map(inode, page, pg_offset, cur, 3128 end - cur + 1, get_extent, em_cached); 3129 if (IS_ERR_OR_NULL(em)) { 3130 SetPageError(page); 3131 unlock_extent(tree, cur, end); 3132 break; 3133 } 3134 extent_offset = cur - em->start; 3135 BUG_ON(extent_map_end(em) <= cur); (...) Consider the following example scenario, where we end up hitting the BUG_ON() in __do_readpage(). We have an inode with a size of 8KiB and 2 extent maps: extent A: file offset 0, length 4KiB, disk_bytenr = X, persisted on disk by a previous transaction extent B: file offset 4KiB, length 4KiB, disk_bytenr = X + 4KiB, not yet persisted but writeback started for it already. The extent map is pinned since there's writeback and an ordered extent in progress, so it can not be merged with extent map A yet The following sequence of steps leads to the BUG_ON(): 1) The ordered extent for extent B completes, the respective page gets its writeback bit cleared and the extent map is unpinned, at that point it is not yet merged with extent map A because it's in the list of modified extents; 2) Due to memory pressure, or some other reason, the MM subsystem releases the page corresponding to extent B - btrfs_releasepage() is called and returns 1, meaning the page can be released as it's not dirty, not under writeback anymore and the extent range is not locked in the inode's iotree. However the extent map is not released, either because we are not in a context that allows memory allocations to block or because the inode's size is smaller than 16MiB - in this case our inode has a size of 8KiB; 3) Task B needs to read extent B and ends up __do_readpage() through the btrfs_readpage() callback. At __do_readpage() it gets a reference to extent map B; 4) Task A, doing a fast fsync, calls clear_em_loggin() against extent map B while holding the write lock on the inode's extent map tree - this results in try_merge_map() being called and since it's possible to merge extent map B with extent map A now (the extent map B was removed from the list of modified extents), the merging begins - it sets extent map B's start offset to 0 (was 4KiB), but before it increments the map's length to 8KiB (4kb + 4KiB), task A is at: BUG_ON(extent_map_end(em) <= cur); The call to extent_map_end() sees the extent map has a start of 0 and a length still at 4KiB, so it returns 4KiB and 'cur' is 4KiB, so the BUG_ON() is triggered. So it's dangerous to modify an extent map that is in the tree, because some other task might have got a reference to it before and still using it, and needs to see a consistent map while using it. Generally this is very rare since most paths that lookup and use extent maps also have the file range locked in the inode's iotree. The fsync path is pretty much the only exception where we don't do it to avoid serialization with concurrent reads. Fix this by not allowing an extent map do be merged if if it's being used by tasks other then the one attempting to merge the extent map (when the reference count of the extent map is greater than 2). Reported-by:
ryusuke1925 <st13s20@gm.ibaraki-ct.ac.jp> Reported-by:
Koki Mitani <koki.mitani.xg@hco.ntt.co.jp> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206211 CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Theodore Ts'o authored
commit d65d87a0 upstream. If CONFIG_QFMT_V2 is not enabled, but CONFIG_QUOTA is enabled, when a user tries to mount a file system with the quota or project quota enabled, the kernel will emit a very confusing messsage: EXT4-fs warning (device vdc): ext4_enable_quotas:5914: Failed to enable quota tracking (type=0, err=-3). Please run e2fsck to fix. EXT4-fs (vdc): mount failed We will now report an explanatory message indicating which kernel configuration options have to be enabled, to avoid customer/sysadmin confusion. Link: https://lore.kernel.org/r/20200215012738.565735-1-tytso@mit.edu Google-Bug-Id: 149093531 Fixes: 7c319d32 ("ext4: make quota as first class supported feature") Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Jan Kara authored
commit 48a34311 upstream. DIR_INDEX has been introduced as a compat ext4 feature. That means that even kernels / tools that don't understand the feature may modify the filesystem. This works because for kernels not understanding indexed dir format, internal htree nodes appear just as empty directory entries. Index dir aware kernels then check the htree structure is still consistent before using the data. This all worked reasonably well until metadata checksums were introduced. The problem is that these effectively made DIR_INDEX only ro-compatible because internal htree nodes store checksums in a different place than normal directory blocks. Thus any modification ignorant to DIR_INDEX (or just clearing EXT4_INDEX_FL from the inode) will effectively cause checksum mismatch and trigger kernel errors. So we have to be more careful when dealing with indexed directories on filesystems with checksumming enabled. 1) We just disallow loading any directory inodes with EXT4_INDEX_FL when DIR_INDEX is not enabled. This is harsh but it should be very rare (it means someone disabled DIR_INDEX on existing filesystem and didn't run e2fsck), e2fsck can fix the problem, and we don't want to answer the difficult question: "Should we rather corrupt the directory more or should we ignore that DIR_INDEX feature is not set?" 2) When we find out htree structure is corrupted (but the filesystem and the directory should in support htrees), we continue just ignoring htree information for reading but we refuse to add new entries to the directory to avoid corrupting it more. Link: https://lore.kernel.org/r/20200210144316.22081-1-jack@suse.cz Fixes: dbe89444 ("ext4: Calculate and verify checksums for htree nodes") Reviewed-by:
Andreas Dilger <adilger@dilger.ca> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Andreas Dilger authored
commit 14c9ca05 upstream. Don't assume that the mmp_nodename and mmp_bdevname strings are NUL terminated, since they are filled in by snprintf(), which is not guaranteed to do so. Link: https://lore.kernel.org/r/1580076215-1048-1-git-send-email-adilger@dilger.ca Signed-off-by:
Andreas Dilger <adilger@dilger.ca> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Alexander Tsoy authored
commit 9f35a312 upstream. It should be safe to ignore clock validity check result if the following conditions are met: - only one single sample rate is supported; - the terminal is directly connected to the clock source; - the clock type is internal. This is to deal with some Denon DJ controllers that always reports that clock is invalid. Tested-by:
Tobias Oszlanyi <toszlanyi@yahoo.de> Signed-off-by:
Alexander Tsoy <alexander@tsoy.me> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200212235450.697348-1-alexander@tsoy.me Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Saurav Girepunje authored
commit 1d4961d9 upstream. Use true/false for bool type return in uac_clock_source_is_valid(). Signed-off-by:
Saurav Girepunje <saurav.girepunje@gmail.com> Link: https://lore.kernel.org/r/20191029175200.GA7320@saurav Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Arvind Sankar authored
commit 93f9d1a4 upstream. The Audioengine D1 (0x2912:0x30c8) does support reading the sample rate, but it returns the rate in byte-reversed order. When setting sampling rate, the driver produces these warning messages: [168840.944226] usb 3-2.2: current rate 4500480 is different from the runtime rate 44100 [168854.930414] usb 3-2.2: current rate 8436480 is different from the runtime rate 48000 [168905.185825] usb 3-2.1.2: current rate 30465 is different from the runtime rate 96000 As can be seen from the hexadecimal conversion, the current rate read back is byte-reversed from the rate that was set. 44100 == 0x00ac44, 4500480 == 0x44ac00 48000 == 0x00bb80, 8436480 == 0x80bb00 96000 == 0x017700, 30465 == 0x007701 Rather than implementing a new quirk to reverse the order, just skip checking the rate to avoid spamming the log. Signed-off-by:
Arvind Sankar <nivedita@alum.mit.edu> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200211162235.1639889-1-nivedita@alum.mit.edu Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Takashi Iwai authored
commit 7dafba37 upstream. MSI-GL73 laptop with ALC1220 codec requires a similar workaround for Clevo laptops to enforce the DAC/mixer connection path. Set up a quirk entry for that. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204159 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200212081047.27727-1-tiwai@suse.de Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Kailang Yang authored
commit 2b3b6497 upstream. Add supported Headset Button for ALC215/ALC285/ALC289. Signed-off-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/948f70b4488f4cc2b629a39ce4e4be33@realtek.com Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Benjamin Tissoires authored
commit 5179a9df upstream. The Yoga 11e is using LEN0049, but it doesn't have a trackstick. Thus, there is no need to create a software top buttons row. However, it seems that the device works under SMBus, so keep it as part of the smbus_pnp_ids. Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200115013023.9710-1-benjamin.tissoires@redhat.com Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Gaurav Agrawal authored
commit b8a3d819 upstream. Add touchpad LEN2044 to the list, as it is capable of working with psmouse.synaptics_intertouch=1 Signed-off-by:
Gaurav Agrawal <agrawalgaurav@gnome.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/CADdtggVzVJq5gGNmFhKSz2MBwjTpdN5YVOdr4D3Hkkv=KZRc9g@mail.gmail.com Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Lyude Paul authored
commit bf502391 upstream. This supports RMI4 and everything seems to work, including the touchpad buttons. So, let's enable this by default. Signed-off-by:
Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200204194322.112638-1-lyude@redhat.com Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Stephen Smalley authored
commit 0188d5c0 upstream. commit bda0be7a ("security: make inode_follow_link RCU-walk aware") passed down the rcu flag to the SELinux AVC, but failed to adjust the test in slow_avc_audit() to also return -ECHILD on LSM_AUDIT_DATA_DENTRY. Previously, we only returned -ECHILD if generating an audit record with LSM_AUDIT_DATA_INODE since this was only relevant from inode_permission. Move the handling of MAY_NOT_BLOCK to avc_audit() and its inlined equivalent in selinux_inode_permission() immediately after we determine that audit is required, and always fall back to ref-walk in this case. Fixes: bda0be7a ("security: make inode_follow_link RCU-walk aware") Reported-by:
Will Deacon <will@kernel.org> Suggested-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Qing Xu authored
commit b70261a2 upstream. mwifiex_cmd_append_vsie_tlv() calls memcpy() without checking the destination size may trigger a buffer overflower, which a local user could use to cause denial of service or the execution of arbitrary code. Fix it by putting the length check before calling memcpy(). Signed-off-by:
Qing Xu <m1s5p6688@gmail.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Qing Xu authored
commit 3a9b153c upstream. mwifiex_ret_wmm_get_status() calls memcpy() without checking the destination size.Since the source is given from remote AP which contains illegal wmm elements , this may trigger a heap buffer overflow. Fix it by putting the length check before calling memcpy(). Signed-off-by:
Qing Xu <m1s5p6688@gmail.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Jerome Brunet authored
commit b1b3f062 upstream. UART2 peripheral is missing from the regmap fixup table of the g12a family clock controller. As it is, any access to this clock would Oops, which is not great. Add the clock to the table to fix the problem. Fixes: 085a4ea9 ("clk: meson: g12a: add peripheral clock controller") Reported-by:
Dmitry Shmidt <dimitrysh@google.com> Tested-by:
Dmitry Shmidt <dimitrysh@google.com> Acked-by:
Neil Armstrong <narmstrong@baylibre.com> Tested-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Bartosz Golaszewski authored
commit cb7a374a upstream. MAX77650 MFD driver uses regmap_irq API but doesn't select the required REGMAP_IRQ option in Kconfig. This can cause the following build error if regmap irq is not enabled implicitly by someone else: ld: drivers/mfd/max77650.o: in function `max77650_i2c_probe': max77650.c:(.text+0xcb): undefined reference to `devm_regmap_add_irq_chip' ld: max77650.c:(.text+0xdb): undefined reference to `regmap_irq_get_domain' make: *** [Makefile:1079: vmlinux] Error 1 Fix it by adding the missing option. Fixes: d0f60334 ("mfd: Add new driver for MAX77650 PMIC") Reported-by:
Paul Gazzillo <paul@pgazz.com> Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Ben Whitten authored
commit 2e31aab0 upstream. When checking if a register block is writable we must ensure that the block does not start with or contain a non incrementing register. Fixes: 8b9f9d4d ("regmap: verify if register is writeable before writing operations") Signed-off-by:
Ben Whitten <ben.whitten@gmail.com> Link: https://lore.kernel.org/r/20200118205625.14532-1-ben.whitten@gmail.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Geert Uytterhoeven authored
commit 805f6357 upstream. The FN_SDSELF_B and FN_SD1_CLK_B enum IDs are used twice, which means one set of users must be wrong. Replace them by the correct enum IDs. Fixes: 87f8c988 ("sh-pfc: Add r8a7778 pinmux support") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191218194812.12741-2-geert+renesas@glider.be Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Geert Uytterhoeven authored
commit a34cd9df upstream. R-Car Gen3 Hardware Manual Errata for Rev. 2.00 of October 24, 2019 changed the configuration bits for drive and bias control for the DU_DOTCLKIN3 pin on R-Car M3-N, to match the same pin on R-Car H3. Update the driver to reflect this. After this, the handling of drive and bias control for the various DU_DOTCLKINx pins is consistent across all of the R-Car H3, M3-W, M3-W+, and M3-N SoCs. Fixes: 86c045c2 ("pinctrl: sh-pfc: r8a77965: Replace DU_DOTCLKIN2 by DU_DOTCLKIN3") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191113101653.28428-1-geert+renesas@glider.be Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Stephen Smalley authored
commit 98aa0034 upstream. commit 2db154b3 ("vfs: syscall: Add move_mount(2) to move mounts around") introduced a new move_mount(2) system call and a corresponding new LSM security_move_mount hook but did not implement this hook for any existing LSM. This creates a regression for SELinux with respect to consistent checking of mounts; the existing selinux_mount hook checks mounton permission to the mount point path. Provide a SELinux hook implementation for move_mount that applies this same check for consistency. In the future we may wish to add a new move_mount filesystem permission and check as well, but this addresses the immediate regression. Fixes: 2db154b3 ("vfs: syscall: Add move_mount(2) to move mounts around") Signed-off-by:
Stephen Smalley <sds@tycho.nsa.gov> Reviewed-by:
Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Stephen Smalley authored
commit 1a37079c upstream. This reverts commit e46e01ee ("selinux: stop passing MAY_NOT_BLOCK to the AVC upon follow_link"). The correct fix is to instead fall back to ref-walk if audit is required irrespective of the specific audit data type. This is done in the next commit. Fixes: e46e01ee ("selinux: stop passing MAY_NOT_BLOCK to the AVC upon follow_link") Reported-by:
Will Deacon <will@kernel.org> Signed-off-by:
Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Gustavo A. R. Silva authored
commit 0d962e06 upstream. Enclose multiple macro parameters in parentheses in order to make such macros safer and fix the Clang warning below: drivers/media/i2c/adv748x/adv748x-afe.c:452:12: warning: operator '?:' has lower precedence than '|'; '|' will be evaluated first [-Wbitwise-conditional-parentheses] ret = sdp_clrset(state, ADV748X_SDP_FRP, ADV748X_SDP_FRP_MASK, enable ? ctrl->val - 1 : 0); Fixes: 3e89586a ("media: i2c: adv748x: add adv748x driver") Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Christophe Roullier authored
commit 85fdc63f upstream. If the watchdog hardware is already enabled during the boot process, when the Linux watchdog driver loads, it should start/reset the watchdog and tell the watchdog framework. As a result, ping can be generated from the watchdog framework (if CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is set), until the userspace watchdog daemon takes over control Fixes:4332d113 ("watchdog: Add STM32 IWDG driver") Signed-off-by:
Christophe Roullier <christophe.roullier@st.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191122132246.8473-1-christophe.roullier@st.com Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Horia Geantă authored
commit 53146d15 upstream. Fixes: 8d818c10 ("crypto: caam/qi2 - add DPAA2-CAAM driver") Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Eric Biggers authored
commit b529f198 upstream. HMAC keys can be of any length, and atmel_sha_hmac_key_set() can only fail due to -ENOMEM. But atmel_sha_hmac_setkey() incorrectly treated any error as a "bad key length" error. Fix it to correctly propagate the -ENOMEM error code and not set any tfm result flags. Fixes: 81d8750b ("crypto: atmel-sha - add support to hmac(shaX)") Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by:
Eric Biggers <ebiggers@google.com> Reviewed-by:
Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-