- Jul 28, 2021
-
-
Krzysztof Kozlowski authored
There is a use after free memory corruption during module exit: - nfcsim_exit() - nfcsim_device_free(dev0) - nfc_digital_unregister_device() This iterates over command queue and frees all commands, - dev->up = false - nfcsim_link_shutdown() - nfcsim_link_recv_wake() This wakes the sleeping thread nfcsim_link_recv_skb(). - nfcsim_link_recv_skb() Wake from wait_event_interruptible_timeout(), call directly the deb->cb callback even though (dev->up == false), - digital_send_cmd_complete() Dereference of "struct digital_cmd" cmd which was freed earlier by nfc_digital_unregister_device(). This causes memory corruption shortly after (with unrelated stack trace): nfc nfc0: NFC: nfcsim_recv_wq: Device is down llcp: nfc_llcp_recv: err -19 nfc nfc1: NFC: nfcsim_recv_wq: Device is down BUG: unable to handle page fault for address: ffffffffffffffed Call Trace: fsnotify+0x54b/0x5c0 __fsnotify_parent+0x1fe/0x300 ? vfs_write+0x27c/0x390 vfs_write+0x27c/0x390 ksys_write+0x63/0xe0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae KASAN report: BUG: KASAN: use-after-free in digital_send_cmd_complete+0x16/0x50 Write of size 8 at addr ffff88800a05f720 by task kworker/0:2/71 Workqueue: events nfcsim_recv_wq [nfcsim] Call Trace: dump_stack_lvl+0x45/0x59 print_address_description.constprop.0+0x21/0x140 ? digital_send_cmd_complete+0x16/0x50 ? digital_send_cmd_complete+0x16/0x50 kasan_report.cold+0x7f/0x11b ? digital_send_cmd_complete+0x16/0x50 ? digital_dep_link_down+0x60/0x60 digital_send_cmd_complete+0x16/0x50 nfcsim_recv_wq+0x38f/0x3d5 [nfcsim] ? nfcsim_in_send_cmd+0x4a/0x4a [nfcsim] ? lock_is_held_type+0x98/0x110 ? finish_wait+0x110/0x110 ? rcu_read_lock_sched_held+0x9c/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x12e/0x1f0 This flow of calling digital_send_cmd_complete() callback on driver exit is specific to nfcsim which implements reading and sending work queues. Since the NFC digital device was unregistered, the callback should not be called. Fixes: 204bddcb ("NFC: nfcsim: Make use of the Digital layer") Cc: <stable@vger.kernel.org> Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wang Hai authored
Replace pci_enable_device() with pcim_enable_device(), pci_disable_device() and pci_release_regions() will be called in release automatically. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wang Hai <wanghai38@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Marcelo Ricardo Leitner authored
As Ben Hutchings noticed, this check should have been inverted: the call returns true in case of success. Reported-by:
Ben Hutchings <ben@decadent.org.uk> Fixes: 0c5dc070 ("sctp: validate from_addr_param return") Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tang Bin authored
In the function s3fwrn5_fw_download(), the 'ret' is not assigned, so the correct value should be given in dev_err function. Fixes: a0302ff5 ("nfc: s3fwrn5: remove unnecessary label") Signed-off-by:
Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by:
Tang Bin <tangbin@cmss.chinamobile.com> Reviewed-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5 fixes 2021-07-27 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Chris Mi authored
The offending refactor commit uses u16 chain wrongly. Actually, it should be u32. Fixes: c620b772 ("net/mlx5: Refactor tc flow attributes structure") CC: Ariel Levkovich <lariel@nvidia.com> Signed-off-by:
Chris Mi <cmi@nvidia.com> Reviewed-by:
Roi Dayan <roid@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Dima Chumak authored
The result of __dev_get_by_index() is not checked for NULL and then gets dereferenced immediately. Also, __dev_get_by_index() must be called while holding either RTNL lock or @dev_base_lock, which isn't satisfied by mlx5e_hairpin_get_mdev() or its callers. This makes the underlying hlist_for_each_entry() loop not safe, and can have adverse effects in itself. Fix by using dev_get_by_index() and handling nullptr return value when ifindex device is not found. Update mlx5e_hairpin_get_mdev() callers to check for possible PTR_ERR() result. Fixes: 77ab67b7 ("net/mlx5e: Basic setup of hairpin object") Addresses-Coverity: ("Dereference null return value") Signed-off-by:
Dima Chumak <dchumak@nvidia.com> Reviewed-by:
Vlad Buslov <vladbu@nvidia.com> Reviewed-by:
Roi Dayan <roid@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Aya Levin authored
When fw_fatal reporter reports an error, the firmware in not responding. Unload the device to ensure that the driver closes all its resources, even if recovery is not due (user disabled auto-recovery or reporter is in grace period). On successful recovery the device is loaded back up. Fixes: b3bd076f ("net/mlx5: Report devlink health on FW fatal issues") Signed-off-by:
Aya Levin <ayal@nvidia.com> Reviewed-by:
Moshe Shemesh <moshe@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Aya Levin authored
Set the correct pci-device pointer to the ptp-RQ. This allows access to dma_mask and avoids allocation request with wrong pci-device. Fixes: a099da8f ("net/mlx5e: Add RQ to PTP channel") Signed-off-by:
Aya Levin <ayal@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Aya Levin authored
Set the correct device pointer to the trap-RQ, to allow access to dma_mask and avoid allocation request with the wrong pci-dev. WARNING: CPU: 1 PID: 12005 at kernel/dma/mapping.c:151 dma_map_page_attrs+0x139/0x1c0 ... all Trace: <IRQ> ? __page_pool_alloc_pages_slow+0x5a/0x210 mlx5e_post_rx_wqes+0x258/0x400 [mlx5_core] mlx5e_trap_napi_poll+0x44/0xc0 [mlx5_core] __napi_poll+0x24/0x150 net_rx_action+0x22b/0x280 __do_softirq+0xc7/0x27e do_softirq+0x61/0x80 </IRQ> __local_bh_enable_ip+0x4b/0x50 mlx5e_handle_action_trap+0x2dd/0x4d0 [mlx5_core] blocking_notifier_call_chain+0x5a/0x80 mlx5_devlink_trap_action_set+0x8b/0x100 [mlx5_core] Fixes: 5543e989 ("net/mlx5e: Add trap entity to ETH driver") Signed-off-by:
Aya Levin <ayal@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Aya Levin authored
Add PTP-RQ to the loop when setting rx-vlan-offload feature via ethtool. On PTP-RQ's creation, set rx-vlan-offload into its parameters. Fixes: a099da8f ("net/mlx5e: Add RQ to PTP channel") Signed-off-by:
Aya Levin <ayal@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Maxim Mikityanskiy authored
If a feature flag is only present in features, but not in hw_features, the user can't reset it. Although hw_features may contain NETIF_F_HW_TC by the point where the driver checks whether HTB offload is supported, this flag is controlled by another condition that may not hold. Set it explicitly to make sure the user can disable it. Fixes: 214baf22 ("net/mlx5e: Support HTB offload") Signed-off-by:
Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Tariq Toukan authored
When HW aggregates packets for an LRO session, it writes the payload of two consecutive packets of a flow contiguously, so that they usually share a cacheline. The first byte of a packet's payload is written immediately after the last byte of the preceding packet. In this flow, there are two consecutive write requests to the shared cacheline: 1. Regular write for the earlier packet. 2. Read-modify-write for the following packet. In case of relaxed-ordering on, these two writes might be re-ordered. Using the end padding optimization (to avoid partial write for the last cacheline of a packet) becomes problematic if the two writes occur out-of-order, as the padding would overwrite payload that belongs to the following packet, causing data corruption. Avoid this by disabling the end padding optimization when both LRO and relaxed-ordering are enabled. Fixes: 17347d54 ("net/mlx5e: Add support for PCI relaxed ordering") Signed-off-by:
Tariq Toukan <tariqt@nvidia.com> Reviewed-by:
Moshe Shemesh <moshe@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Roi Dayan authored
This is the same check as LAG mode checks if to enable lag. This will fix adding peer miss rules if lag is not supported and even an incorrect rules in socket direct mode. Also fix the incorrect comment on mlx5_get_next_phys_dev() as flow #1 doesn't exists. Fixes: ac004b83 ("net/mlx5e: E-Switch, Add peer miss rules") Signed-off-by:
Roi Dayan <roid@nvidia.com> Reviewed-by:
Maor Dickman <maord@nvidia.com> Reviewed-by:
Mark Bloch <mbloch@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Maor Dickman authored
Destination vport vhca id is valid flag is set only merged eswitch isn't supported. Change destination vport vhca id value to be set also only when merged eswitch is supported. Fixes: e4ad91f2 ("net/mlx5e: Split offloaded eswitch TC rules for port mirroring") Signed-off-by:
Maor Dickman <maord@nvidia.com> Reviewed-by:
Roi Dayan <roid@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Maor Dickman authored
Rx ntuple offload is not supported in switchdev mode. Tryng to enable it cause kernel panic. BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 80000001065a5067 P4D 80000001065a5067 PUD 106594067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 7 PID: 1089 Comm: ethtool Not tainted 5.13.0-rc7_for_upstream_min_debug_2021_06_23_16_44 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5e_arfs_enable+0x70/0xd0 [mlx5_core] Code: 44 24 10 00 00 00 00 48 c7 44 24 18 00 00 00 00 49 63 c4 48 89 e2 44 89 e6 48 69 c0 20 08 00 00 48 89 ef 48 03 85 68 ac 00 00 <48> 8b 40 08 48 89 44 24 08 e8 d2 aa fd ff 48 83 05 82 96 18 00 01 RSP: 0018:ffff8881047679e0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000004000000000 RCX: 0000004000000000 RDX: ffff8881047679e0 RSI: 0000000000000000 RDI: ffff888115100880 RBP: ffff888115100880 R08: ffffffffa00f6cb0 R09: ffff888104767a18 R10: ffff8881151000a0 R11: ffff888109479540 R12: 0000000000000000 R13: ffff888104767bb8 R14: ffff888115100000 R15: ffff8881151000a0 FS: 00007f41a64ab740(0000) GS:ffff8882f5dc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000104cbc005 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: set_feature_arfs+0x1e/0x40 [mlx5_core] mlx5e_handle_feature+0x43/0xa0 [mlx5_core] mlx5e_set_features+0x139/0x1b0 [mlx5_core] __netdev_update_features+0x2b3/0xaf0 ethnl_set_features+0x176/0x3a0 ? __nla_parse+0x22/0x30 genl_family_rcv_msg_doit+0xe2/0x140 genl_rcv_msg+0xde/0x1d0 ? features_reply_size+0xe0/0xe0 ? genl_get_cmd+0xd0/0xd0 netlink_rcv_skb+0x4e/0xf0 genl_rcv+0x24/0x40 netlink_unicast+0x1f6/0x2b0 netlink_sendmsg+0x225/0x450 sock_sendmsg+0x33/0x40 __sys_sendto+0xd4/0x120 ? __sys_recvmsg+0x4e/0x90 ? exc_page_fault+0x219/0x740 __x64_sys_sendto+0x25/0x30 do_syscall_64+0x3f/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f41a65b0cba Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 76 c3 0f 1f 44 00 00 55 48 83 ec 30 44 89 4c RSP: 002b:00007ffd8d688358 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00000000010f42a0 RCX: 00007f41a65b0cba RDX: 0000000000000058 RSI: 00000000010f43b0 RDI: 0000000000000003 RBP: 000000000047ae60 R08: 00007f41a667c000 R09: 000000000000000c R10: 0000000000000000 R11: 0000000000000246 R12: 00000000010f4340 R13: 00000000010f4350 R14: 00007ffd8d688400 R15: 00000000010f42a0 Modules linked in: mlx5_vdpa vhost_iotlb vdpa xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad ib_ipoib rdma_cm iw_cm ib_cm mlx5_ib ib_uverbs ib_core overlay mlx5_core ptp pps_core fuse CR2: 0000000000000008 ---[ end trace c66523f2aba94b43 ]--- Fixes: 7a9fb35e ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode") Signed-off-by:
Maor Dickman <maord@nvidia.com> Reviewed-by:
Roi Dayan <roid@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Maor Gottlieb authored
Fix a bug when flow table is created in priority that already has other flow tables as shown in the below diagram. If the new flow table (FT-B) has the lowest level in the priority, we need to connect the flow tables from the previous priority (p0) to this new table. In addition when this flow table is destroyed (FT-B), we need to connect the flow tables from the previous priority (p0) to the next level flow table (FT-C) in the same priority of the destroyed table (if exists). --------- |root_ns| --------- | -------------------------------- | | | ---------- ---------- --------- |p(prio)-x| | p-y | | p-n | ---------- ---------- --------- | | ---------------- ------------------ |ns(e.g bypass)| |ns(e.g. kernel) | ---------------- ------------------ | | | ------- ------ ---- | p0 | | p1 | |p2| ------- ------ ---- | | \ -------- ------- ------ | FT-A | |FT-B | |FT-C| -------- ------- ------ Fixes: f90edfd2 ("net/mlx5_core: Connect flow tables") Signed-off-by:
Maor Gottlieb <maorg@nvidia.com> Reviewed-by:
Mark Bloch <mbloch@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Yufeng Mo authored
The ptp cycle is related to the hardware, so it may cause compatibility issues if a fixed value is used in driver. Therefore, the method of obtaining this value is changed to read from the register rather than use a fixed value in driver. Fixes: 0bf5eb78 ("net: hns3: add support for PTP") Signed-off-by:
Yufeng Mo <moyufeng@huawei.com> Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Jul 27, 2021
-
-
Tang Bin authored
In the function s3fwrn5_fw_download(), the 'ret' is not assigned, so the correct value should be given in dev_err function. Fixes: a0302ff5 ("nfc: s3fwrn5: remove unnecessary label") Signed-off-by:
Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by:
Tang Bin <tangbin@cmss.chinamobile.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pavel Skripkin authored
Syzbot reported skb_over_panic() in llc_pdu_init_as_xid_cmd(). The problem was in wrong LCC header manipulations. Syzbot's reproducer tries to send XID packet. llc_ui_sendmsg() is doing following steps: 1. skb allocation with size = len + header size len is passed from userpace and header size is 3 since addr->sllc_xid is set. 2. skb_reserve() for header_len = 3 3. filling all other space with memcpy_from_msg() Ok, at this moment we have fully loaded skb, only headers needs to be filled. Then code comes to llc_sap_action_send_xid_c(). This function pushes 3 bytes for LLC PDU header and initializes it. Then comes llc_pdu_init_as_xid_cmd(). It initalizes next 3 bytes *AFTER* LLC PDU header and call skb_push(skb, 3). This looks wrong for 2 reasons: 1. Bytes rigth after LLC header are user data, so this function was overwriting payload. 2. skb_push(skb, 3) call can cause skb_over_panic() since all free space was filled in llc_ui_sendmsg(). (This can happen is user passed 686 len: 686 + 14 (eth header) + 3 (LLC header) = 703. SKB_DATA_ALIGN(703) = 704) So, in this patch I added 2 new private constansts: LLC_PDU_TYPE_U_XID and LLC_PDU_LEN_U_XID. LLC_PDU_LEN_U_XID is used to correctly reserve header size to handle LLC + XID case. LLC_PDU_TYPE_U_XID is used by llc_pdu_header_init() function to push 6 bytes instead of 3. And finally I removed skb_push() call from llc_pdu_init_as_xid_cmd(). This changes should not affect other parts of LLC, since after all steps we just transmit buffer. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-and-tested-by:
<syzbot+5e5a981ad7cc54c4b2b4@syzkaller.appspotmail.com> Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sunil Goutham authored
NIX_RX_SW_SYNC ensures all existing transactions are finished and pkts are written to LLC/DRAM, queues should be teared down after successful SW_SYNC. Due to a HW errata, in some rare scenarios an existing transaction might end after SW_SYNC operation. To ensure operation is fully done, do the SW_SYNC twice. Signed-off-by:
Sunil Goutham <sgoutham@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Somnath Kotur authored
Now that we return when bnxt_open() fails in bnxt_fw_reset_task(), there is no need to check for 'rc' value again before invoking bnxt_reenable_sriov(). Fixes: 3958b1da ("bnxt_en: fix error path of FW reset") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Jul 26, 2021
-
-
Letu Ren authored
When calling the 'ql_wait_for_drvr_lock' and 'ql_adapter_reset', the driver has already acquired the spin lock, so the driver should not call 'ssleep' in atomic context. This bug can be fixed by using 'mdelay' instead of 'ssleep'. Reported-by:
Letu Ren <fantasquex@gmail.com> Signed-off-by:
Letu Ren <fantasquex@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Chen Shen authored
sctp_inet6addr_event deletes 'addr' from 'local_addr_list' when setting netdev down, but it is possible to delete the incorrect entry (match the first one with the same ipaddr, but the different 'ifindex'), if there are some netdevs with the same 'local-link' ipaddr added already. It should delete the entry depending on 'sin6_addr' and 'sin6_scope_id' both. otherwise, the endpoint will call 'sctp_sf_ootb' if it can't find the according association when receives 'heartbeat', and finally will reply 'abort'. For example: 1.when linux startup the entries in local_addr_list: ifindex:35 addr:fe80::40:43ff:fe80:0 (eths0.201) ifindex:36 addr:fe80::40:43ff:fe80:0 (eths0.209) ifindex:37 addr:fe80::40:43ff:fe80:0 (eths0.210) the route table: local fe80::40:43ff:fe80:0 dev eths0.201 local fe80::40:43ff:fe80:0 dev eths0.209 local fe80::40:43ff:fe80:0 dev eths0.210 2.after 'ifconfig eths0.209 down' the entries in local_addr_list: ifindex:36 addr:fe80::40:43ff:fe80:0 (eths0.209) ifindex:37 addr:fe80::40:43ff:fe80:0 (eths0.210) the route table: local fe80::40:43ff:fe80:0 dev eths0.201 local fe80::40:43ff:fe80:0 dev eths0.210 3.asoc not found for src:[fe80::40:43ff:fe80:0]:37381 dst:[:1]:53335 ::1->fe80::40:43ff:fe80:0 HEARTBEAT fe80::40:43ff:fe80:0->::1 ABORT Signed-off-by:
Chen Shen <peterchenshen@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mohammad Athari Bin Ismail authored
Assign dwmac5_est_irq_status to est_irq_status callback function for GMAC 4.10 and 5.10. With this, EST related interrupts could be handled properly. Fixes: e49aa315 ("net: stmmac: EST interrupts handling and error reporting") Cc: <stable@vger.kernel.org> # 5.13.x Signed-off-by:
Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com> Acked-by:
Wong Vee Khee <vee.khee.wong@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Xin Long says: ==================== sctp: improve the pmtu probe in Search Complete state Timo recently suggested to use the loss of (data) packets as indication to send pmtu probe for Search Complete state, which should also be implied by RFC8899. This patchset is to change the current one that is doing probe with current pmtu all the time. v1->v2: - see Patch 2/2. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xin Long authored
This patch is to introduce last_rtx_chunks into sctp_transport to detect if there's any packet retransmission/loss happened by checking against asoc's rtx_data_chunks in sctp_transport_pl_send(). If there is, namely, transport->last_rtx_chunks != asoc->rtx_data_chunks, the pmtu probe will be sent out. Otherwise, increment the pl.raise_count and return when it's in Search Complete state. With this patch, if in Search Complete state, which is a long period, it doesn't need to keep probing the current pmtu unless there's data packet loss. This will save quite some traffic. v1->v2: - add the missing Fixes tag. Fixes: 0dac127c ("sctp: do black hole detection in search complete state") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xin Long authored
This patch does 3 things: - make sctp_transport_pl_send() and sctp_transport_pl_recv() return bool type to decide if more probe is needed to send. - pr_debug() only when probe is really needed to send. - count pl.raise_count in sctp_transport_pl_send() instead of sctp_transport_pl_recv(), and it's only incremented for the 1st probe for the same size. These are preparations for the next patch to make probes happen only when there's packet loss in Search Complete state. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Harshvardhan Jha authored
The list_for_each_entry() iterator, "vlan" in this code, can never be NULL so the warning will never be printed. Signed-off-by:
Harshvardhan Jha <harshvardhan.jha@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Jul 25, 2021
-
-
Jiapeng Chong authored
The error code is missing in this code scenario, add the error code '-EINVAL' to the return value 'err'. Eliminate the follow smatch warning: drivers/net/ethernet/mellanox/mlx4/main.c:3538 mlx4_load_one() warn: missing error code 'err'. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Fixes: 7ae0e400 ("net/mlx4_core: Flexible (asymmetric) allocation of EQs and MSI-X vectors for PF/VFs") Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kevin Lo authored
Restore PHY_ID_BCM54811 accidently removed by commit 5d4358ed. Fixes: 5d4358ed ("net: phy: broadcom: Allow BCM54210E to configure APD") Signed-off-by:
Kevin Lo <kevlo@kevlo.org> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Parav Pandit authored
Merge commit cited in fixes tag was incorrect. Due to it phys_port_name of the virtual port resulted in incorrect name. Also the phys_port_name of the physical port was written twice due to the merge error. Fix it by removing the old code and inserting back the misplaced code. Related commits of interest in net and net-next branches that resulted in merge conflict are: in net-next branch: commit f285f37c ("devlink: append split port number to the port name") in net branch: commit b28d8f0c ("devlink: Correct VIRTUAL port to not have phys_port attributes") Fixes: 12628565 ("Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/net") Signed-off-by:
Parav Pandit <parav@nvidia.com> Reported-by:
Niklas Schnelle <schnelle@linux.ibm.com> Tested-by:
Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hariprasad Kelam authored
Avoid configure backpressure for LBK links as they don't support it and enable lmacs before configuration pause frames. Fixes: 75f36270 ("octeontx2-pf: Support to enable/disable pause frames via ethtool") Signed-off-by:
Geetha sowjanya <gakula@marvell.com> Signed-off-by:
Hariprasad Kelam <hkelam@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Geetha sowjanya authored
In the existing code while changing the number of TX/RX queues using ethtool the PF/VF interface resources are freed and reallocated (otx2_stop and otx2_open is called) if the device is in running state. If any resource allocation fails in otx2_open, driver free already allocated resources and return. But again, when the number of queues changes as the device state still running oxt2_stop is called. In which we try to free already freed resources leading to driver crash. This patch fixes the issue by setting the INTF_DOWN flag on error and free the resources in otx2_stop only if the flag is not set. Fixes: 50fe6c02 ("octeontx2-pf: Register and handle link notifications") Signed-off-by:
Geetha sowjanya <gakula@marvell.com> Signed-off-by:
Sunil Kovvuri Goutham <Sunil.Goutham@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Geetha sowjanya authored
Currently PKINDs are not assigned to LBK channels. The default value of LBK_CHX_PKIND (channel to PKIND mapping) register is zero, which is resulting in a overlap of pkind between LBK and CGX LMACs. When KPU1 parser config is modified when PTP timestamping is enabled on the CGX LMAC interface it is impacting traffic on LBK interfaces as well. This patch fixes the issue by reserving the PKIND#0 for LBK devices. CGX mapped PF pkind starts from 1 and also fixes the max pkind available. Fixes: 42157217 ("octeontx2-af: Support to enable/disable HW timestamping") Signed-off-by:
Geetha sowjanya <gakula@marvell.com> Signed-off-by:
Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
We use the timecounter APIs for the 48-bit PHC and packet timestamps. We must periodically update the timecounter at roughly half the overflow interval. The overflow interval is about 78 hours, so update it every 19 hours (1/4 interval) for some extra margins. Fixes: 390862f4 ("bnxt_en: Get the full 48-bit hardware timestamp periodically") Reviewed-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xin Long authored
One skb's skb_shinfo frags are not writable, and they can be shared with other skbs' like by pskb_copy(). To write the frags may cause other skb's data crash. So before doing en/decryption, skb_cow_data() should always be called for a cloned or nonlinear skb if req dst is using the same sg as req src. While at it, the likely branch can be removed, as it will be covered by skb_cow_data(). Note that esp_input() has the same issue, and I will fix it in another patch. tipc_aead_encrypt() doesn't have this issue, as it only processes linear data in the unlikely branch. Fixes: fc1b6d6d ("tipc: introduce TIPC encryption & authentication") Reported-by:
Shuang Li <shuali@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Jon Maloy <jmaloy@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-5.14-20210724' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can linux-can-fixes-for-5.14-20210724 Marc Kleine-Budde says: ==================== pull-request: can 2021-07-24 this is a pull request of 6 patches for net/master. The first patch is by Joakim Zhang targets the imx8mp device tree. It removes the imx6 fallback from the flexcan binding, as the imx6 is not compatible with the imx8mp. Ziyang Xuan contributes a patch to fix a use-after-free in the CAN raw's raw_setsockopt(). The next two patches target the CAN J1939 protocol. The first one is by Oleksij Rempel and clarifies the lifetime of session object in j1939_session_deactivate(). Zhang Changzhong's patch fixes the timeout value between consecutive TP.DT. Stephane Grosjean contributes a patch for the peak_usb driver to fix reading of the rxerr/txerr values. The last patch is by me for the mcp251xfd driver. It stops the timestamp worker in case of a fatal error in the IRQ handler. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Marc Kleine-Budde authored
In case an error occurred in the IRQ handler, the chip status is dumped via devcoredump and all IRQs are disabled, but the chip stays powered for further analysis. The chip is in an undefined state and will not receive any CAN frames, so shut down the timestamping worker, which reads the TBC register regularly, too. This avoids any CRC read error messages if there is a communication problem with the chip. Fixes: efd8d98d ("can: mcp251xfd: add HW timestamp infrastructure") Link: https://lore.kernel.org/r/20210724155131.471303-1-mkl@pengutronix.de Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Stephane Grosjean authored
This patch fixes an incorrect way of reading error counters in messages received for this purpose from the PCAN-USB interface. These messages inform about the increase or decrease of the error counters, whose values are placed in bytes 1 and 2 of the message data (not 0 and 1). Fixes: ea8b33bd ("can: pcan_usb: add support of rxerr/txerr counters") Link: https://lore.kernel.org/r/20210625130931.27438-4-s.grosjean@peak-system.com Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-