- Sep 03, 2021
-
-
Yonglong Liu authored
[ Upstream commit b15c072a ] In bond 4, when the link goes down and up repeatedly, the bond may get an unknown speed, and then this port can not work. The driver notify netif_carrier_on() before update the link state, when the bond receive carrier on, will query the speed of the port, if the query operation happens before updating the link state, will get an unknown speed. So need to notify netif_carrier_on() after update the link state. Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Fixes: e2cb1dec ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Yufeng Mo authored
[ Upstream commit a96d9330 ] After the cmdq registers are cleared, the firmware may take time to clear out possible left over commands in the cmdq. Driver must release cmdq memory only after firmware has completed processing of left over commands. Fixes: 232d0d55 ("net: hns3: uninitialize command queue while unloading PF driver") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Yufeng Mo authored
[ Upstream commit 1a6d2819 ] If a PF is bonded to a virtual machine and the virtual machine exits unexpectedly, some hardware resource cannot be cleared. In this case, loading driver may cause exceptions. Therefore, the hardware resource needs to be cleared when the driver is loaded. Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Andrey Ignatov authored
[ Upstream commit 96a6b93b ] Currently when device is moved between network namespaces using RTM_NEWLINK message type and one of netns attributes (FLA_NET_NS_PID, IFLA_NET_NS_FD, IFLA_TARGET_NETNSID) but w/o specifying IFLA_IFNAME, and target namespace already has device with same name, userspace will get EINVAL what is confusing and makes debugging harder. Fix it so that userspace gets more appropriate EEXIST instead what makes debugging much easier. Before: # ./ifname.sh + ip netns add ns0 + ip netns exec ns0 ip link add l0 type dummy + ip netns exec ns0 ip link show l0 8: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 66:90:b5:d5:78:69 brd ff:ff:ff:ff:ff:ff + ip link add l0 type dummy + ip link show l0 10: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 6e:c6:1f:15:20:8d brd ff:ff:ff:ff:ff:ff + ip link set l0 netns ns0 RTNETLINK answers: Invalid argument After: # ./ifname.sh + ip netns add ns0 + ip netns exec ns0 ip link add l0 type dummy + ip netns exec ns0 ip link show l0 8: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 1e:4a:72:e3:e3:8f brd ff:ff:ff:ff:ff:ff + ip link add l0 type dummy + ip link show l0 10: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether f2:fc:fe:2b:7d:a6 brd ff:ff:ff:ff:ff:ff + ip link set l0 netns ns0 RTNETLINK answers: File exists The problem is that do_setlink() passes its `char *ifname` argument, that it gets from a caller, to __dev_change_net_namespace() as is (as `const char *pat`), but semantics of ifname and pat can be different. For example, __rtnl_newlink() does this: net/core/rtnetlink.c 3270 char ifname[IFNAMSIZ]; ... 3286 if (tb[IFLA_IFNAME]) 3287 nla_strscpy(ifname, tb[IFLA_IFNAME], IFNAMSIZ); 3288 else 3289 ifname[0] = '\0'; ... 3364 if (dev) { ... 3394 return do_setlink(skb, dev, ifm, extack, tb, ifname, status); 3395 } , i.e. do_setlink() gets ifname pointer that is always valid no matter if user specified IFLA_IFNAME or not and then do_setlink() passes this ifname pointer as is to __dev_change_net_namespace() as pat argument. But the pat (pattern) in __dev_change_net_namespace() is used as: net/core/dev.c 11198 err = -EEXIST; 11199 if (__dev_get_by_name(net, dev->name)) { 11200 /* We get here if we can't use the current device name */ 11201 if (!pat) 11202 goto out; 11203 err = dev_get_valid_name(net, dev, pat); 11204 if (err < 0) 11205 goto out; 11206 } As the result the `goto out` path on line 11202 is neven taken and instead of returning EEXIST defined on line 11198, __dev_change_net_namespace() returns an error from dev_get_valid_name() and this, in turn, will be EINVAL for ifname[0] = '\0' set earlier. Fixes: d8a5ec67 ("[NET]: netlink support for moving devices between network namespaces.") Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Kurt Kanzenbach authored
[ Upstream commit b7658ed3 ] Traffic schedules can only be started up to eight seconds within the future. Therefore, the driver periodically checks every two seconds whether the admin base time provided by the user is inside that window. If so the schedule is started. Otherwise the check is deferred. However, according to the programming manual the look ahead window size should be four - not eight - seconds. By using the proposed value of four seconds starting a schedule at a specified admin base time actually works as expected. Fixes: 24dfc6eb ("net: dsa: hellcreek: Add TAPRIO offloading support") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Kurt Kanzenbach authored
[ Upstream commit a7db5ed8 ] Currently the gate control list which is programmed into the hardware is incorrect resulting in wrong traffic schedules. The problem is the loop variables are incremented before they are referenced. Therefore, move the increment to the end of the loop. Fixes: 24dfc6eb ("net: dsa: hellcreek: Add TAPRIO offloading support") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Rahul Lakkireddy authored
[ Upstream commit 43fed4d4 ] When adapter init fails, the blocked freelist bitmap is already freed up and should not be touched. So, move the bitmap zeroing closer to where it was successfully allocated. Also handle adapter init failure unwind path immediately and avoid setting up RDMA memory windows. Fixes: 5b377d11 ("cxgb4: Add debugfs facility to inject FL starvation") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Eric Dumazet authored
[ Upstream commit 6457378f ] A group of security researchers brought to our attention the weakness of hash function used in fnhe_hashfun(). Lets use siphash instead of Jenkins Hash, to considerably reduce security risks. Also remove the inline keyword, this really is distracting. Fixes: d546c621 ("ipv4: harden fnhe_hashfun()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Keyu Man <kman001@ucr.edu> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Eric Dumazet authored
[ Upstream commit 4785305c ] A group of security researchers brought to our attention the weakness of hash function used in rt6_exception_hash() Lets use siphash instead of Jenkins Hash, to considerably reduce security risks. Following patch deals with IPv4. Fixes: 35732d01 ("ipv6: introduce a hash table to store dst cache") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Keyu Man <kman001@ucr.edu> Cc: Wei Wang <weiwan@google.com> Cc: Martin KaFai Lau <kafai@fb.com> Acked-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Trond Myklebust authored
[ Upstream commit 062b829c ] If the attempt to reserve a slot fails, we currently leak the XPT_BUSY flag on the socket. Among other things, this make it impossible to close the socket. Fixes: 82011c80 ("SUNRPC: Move svc_xprt_received() call sites") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Davide Caratti authored
[ Upstream commit cd9b50ad ] While running kselftests, Hangbin observed that sch_ets.sh often crashes, and splats like the following one are seen in the output of 'dmesg': BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 159f12067 P4D 159f12067 PUD 159f13067 PMD 0 Oops: 0000 [#1] SMP NOPTI CPU: 2 PID: 921 Comm: tc Not tainted 5.14.0-rc6+ #458 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 RIP: 0010:__list_del_entry_valid+0x2d/0x50 Code: 48 8b 57 08 48 b9 00 01 00 00 00 00 ad de 48 39 c8 0f 84 ac 6e 5b 00 48 b9 22 01 00 00 00 00 ad de 48 39 ca 0f 84 cf 6e 5b 00 <48> 8b 32 48 39 fe 0f 85 af 6e 5b 00 48 8b 50 08 48 39 f2 0f 85 94 RSP: 0018:ffffb2da005c3890 EFLAGS: 00010217 RAX: 0000000000000000 RBX: ffff9073ba23f800 RCX: dead000000000122 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff9073ba23fbc8 RBP: ffff9073ba23f890 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000001 R12: dead000000000100 R13: ffff9073ba23fb00 R14: 0000000000000002 R15: 0000000000000002 FS: 00007f93e5564e40(0000) GS:ffff9073bba00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000014ad34000 CR4: 0000000000350ee0 Call Trace: ets_qdisc_reset+0x6e/0x100 [sch_ets] qdisc_reset+0x49/0x1d0 tbf_reset+0x15/0x60 [sch_tbf] qdisc_reset+0x49/0x1d0 dev_reset_queue.constprop.42+0x2f/0x90 dev_deactivate_many+0x1d3/0x3d0 dev_deactivate+0x56/0x90 qdisc_graft+0x47e/0x5a0 tc_get_qdisc+0x1db/0x3e0 rtnetlink_rcv_msg+0x164/0x4c0 netlink_rcv_skb+0x50/0x100 netlink_unicast+0x1a5/0x280 netlink_sendmsg+0x242/0x480 sock_sendmsg+0x5b/0x60 ____sys_sendmsg+0x1f2/0x260 ___sys_sendmsg+0x7c/0xc0 __sys_sendmsg+0x57/0xa0 do_syscall_64+0x3a/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f93e44b8338 Code: 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 25 43 2c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 41 89 d4 55 RSP: 002b:00007ffc0db737a8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000061255c06 RCX: 00007f93e44b8338 RDX: 0000000000000000 RSI: 00007ffc0db73810 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 000000000000000b R11: 0000000000000246 R12: 0000000000000001 R13: 0000000000687880 R14: 0000000000000000 R15: 0000000000000000 Modules linked in: sch_ets sch_tbf dummy rfkill iTCO_wdt iTCO_vendor_support intel_rapl_msr intel_rapl_common joydev i2c_i801 pcspkr i2c_smbus lpc_ich virtio_balloon ip_tables xfs libcrc32c crct10dif_pclmul crc32_pclmul crc32c_intel ahci libahci ghash_clmulni_intel libata serio_raw virtio_blk virtio_console virtio_net net_failover failover sunrpc dm_mirror dm_region_hash dm_log dm_mod CR2: 0000000000000000 When the change() function decreases the value of 'nstrict', we must take into account that packets might be already enqueued on a class that flips from 'strict' to 'quantum': otherwise that class will not be added to the bandwidth-sharing list. Then, a call to ets_qdisc_reset() will attempt to do list_del(&alist) with 'alist' filled with zero, hence the NULL pointer dereference. For classes flipping from 'strict' to 'quantum', initialize an empty list and eventually add it to the bandwidth-sharing list, if there are packets already enqueued. In this way, the kernel will: a) prevent crashing as described above. b) avoid retaining the backlog packets (for an arbitrarily long time) in case no packet is enqueued after a change from 'strict' to 'quantum'. Reported-by: Hangbin Liu <liuhangbin@gmail.com> Fixes: dcc68b4d ("net: sch_ets: Add a new Qdisc") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Alexey Gladkov authored
[ Upstream commit bbb6d0f3 ] We need to increment the ucounts reference counter befor security_prepare_creds() because this function may fail and abort_creds() will try to decrement this reference. [ 96.465056][ T8641] FAULT_INJECTION: forcing a failure. [ 96.465056][ T8641] name fail_page_alloc, interval 1, probability 0, space 0, times 0 [ 96.478453][ T8641] CPU: 1 PID: 8641 Comm: syz-executor668 Not tainted 5.14.0-rc6-syzkaller #0 [ 96.487215][ T8641] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 [ 96.497254][ T8641] Call Trace: [ 96.500517][ T8641] dump_stack_lvl+0x1d3/0x29f [ 96.505758][ T8641] ? show_regs_print_info+0x12/0x12 [ 96.510944][ T8641] ? log_buf_vmcoreinfo_setup+0x498/0x498 [ 96.516652][ T8641] should_fail+0x384/0x4b0 [ 96.521141][ T8641] prepare_alloc_pages+0x1d1/0x5a0 [ 96.526236][ T8641] __alloc_pages+0x14d/0x5f0 [ 96.530808][ T8641] ? __rmqueue_pcplist+0x2030/0x2030 [ 96.536073][ T8641] ? lockdep_hardirqs_on_prepare+0x3e2/0x750 [ 96.542056][ T8641] ? alloc_pages+0x3f3/0x500 [ 96.546635][ T8641] allocate_slab+0xf1/0x540 [ 96.551120][ T8641] ___slab_alloc+0x1cf/0x350 [ 96.555689][ T8641] ? kzalloc+0x1d/0x30 [ 96.559740][ T8641] __kmalloc+0x2e7/0x390 [ 96.563980][ T8641] ? kzalloc+0x1d/0x30 [ 96.568029][ T8641] kzalloc+0x1d/0x30 [ 96.571903][ T8641] security_prepare_creds+0x46/0x220 [ 96.577174][ T8641] prepare_creds+0x411/0x640 [ 96.581747][ T8641] __sys_setfsuid+0xe2/0x3a0 [ 96.586333][ T8641] do_syscall_64+0x3d/0xb0 [ 96.590739][ T8641] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 96.596611][ T8641] RIP: 0033:0x445a69 [ 96.600483][ T8641] Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 11 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 [ 96.620152][ T8641] RSP: 002b:00007f1054173318 EFLAGS: 00000246 ORIG_RAX: 000000000000007a [ 96.628543][ T8641] RAX: ffffffffffffffda RBX: 00000000004ca4c8 RCX: 0000000000445a69 [ 96.636600][ T8641] RDX: 0000000000000010 RSI: 00007f10541732f0 RDI: 0000000000000000 [ 96.644550][ T8641] RBP: 00000000004ca4c0 R08: 0000000000000001 R09: 0000000000000000 [ 96.652500][ T8641] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004ca4cc [ 96.660631][ T8641] R13: 00007fffffe0b62f R14: 00007f1054173400 R15: 0000000000022000 Fixes: 905ae01c ("Add a reference to ucounts for each cred") Reported-by: <syzbot+01985d7909f9468f013c@syzkaller.appspotmail.com> Signed-off-by: Alexey Gladkov <legion@kernel.org> Link: https://lkml.kernel.org/r/97433b1742c3331f02ad92de5a4f07d673c90613.1629735352.git.legion@kernel.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Maxim Kiselev authored
[ Upstream commit 359f4cdd ] According to Armada XP datasheet bit at 0 position is corresponding for TxInProg indication. Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Christophe JAILLET authored
[ Upstream commit 5ed74b03 ] A successful 'xge_mdio_config()' call should be balanced by a corresponding 'xge_mdio_remove()' call in the error handling path of the probe, as already done in the remove function. Update the error handling path accordingly. Fixes: ea8ab16a ("drivers: net: xgene-v2: Add MDIO support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Shreyansh Chouhan authored
[ Upstream commit 1d011c48 ] Validate csum_start in gre_handle_offloads before we call _gre_xmit so that we do not crash later when the csum_start value is used in the lco_csum function call. This patch deals with ipv4 code. Fixes: c5441932 ("GRE: Refactor GRE tunneling code.") Reported-by: <syzbot+ff8e1b9f2f36481e2efc@syzkaller.appspotmail.com> Signed-off-by: Shreyansh Chouhan <chouhan.shreyansh630@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Gal Pressman authored
[ Upstream commit dbe986bd ] Make sure to free the IRQ vectors in case the allocation doesn't return the expected number of IRQs. Fixes: b7f5e880 ("RDMA/efa: Add the efa module") Link: https://lore.kernel.org/r/20210811151131.39138-2-galpress@amazon.com Reviewed-by: Firas JahJah <firasj@amazon.com> Reviewed-by: Yossi Leybovich <sleybo@amazon.com> Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Sasha Neftin authored
[ Upstream commit 4051f683 ] On new platforms, the NVM is read-only. Attempting to update the NVM is causing a lockup to occur. Do not attempt to write to the NVM on platforms where it's not supported. Emit an error message when the NVM checksum is invalid. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213667 Fixes: fb776f5d ("e1000e: Add support for Tiger Lake") Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Suggested-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Sasha Neftin authored
[ Upstream commit 44a13a5d ] We should decode the latency and the max_latency before directly compare. The latency should be presented as lat_enc = scale x value: lat_enc_d = (lat_enc & 0x0x3ff) x (1U << (5*((max_ltr_enc & 0x1c00) >> 10))) Fixes: cf8fb73c ("e1000e: add support for LTR on I217/I218") Suggested-by: Yee Li <seven.yi.lee@gmail.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Toshiki Nishioka authored
[ Upstream commit 691bd4d7 ] Use num_tx_queues rather than the IGC_MAX_TX_QUEUES fixed number 4 when iterating over tx_ring queue since instantiated queue count could be less than 4 where on-line cpu count is less than 4. Fixes: ec50a9d4 ("igc: Add support for taprio offloading") Signed-off-by: Toshiki Nishioka <toshiki.nishioka@intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Aaron Ma authored
[ Upstream commit 4b799595 ] After unplug thunderbolt dock with i225, pciehp interrupt is triggered, remove call will read/write mmio address which is already disconnected, then cause page fault and make system hang. Check PCI state to remove device safely. Trace: BUG: unable to handle page fault for address: 000000000000b604 Oops: 0000 [#1] SMP NOPTI RIP: 0010:igc_rd32+0x1c/0x90 [igc] Call Trace: igc_ptp_suspend+0x6c/0xa0 [igc] igc_ptp_stop+0x12/0x50 [igc] igc_remove+0x7f/0x1c0 [igc] pci_device_remove+0x3e/0xb0 __device_release_driver+0x181/0x240 Fixes: 13b5b7fd ("igc: Add support for Tx/Rx rings") Fixes: b03c49cd ("igc: Save PTP time before a reset") Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Petko Manolov authored
[ Upstream commit ffc9c3eb ] - restore the behavior in enable_net_traffic() to avoid regressions - Jakub Kicinski; - hurried up and removed redundant assignment in pegasus_open() before yet another checker complains; Fixes: 8a160e2e ("net: usb: pegasus: Check the return value of get_geristers() and friends;") Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Petko Manolov <petko.manolov@konsulko.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jacob Keller authored
[ Upstream commit a8f89fa2 ] The devlink dev info command reports version information about the device and firmware running on the board. This includes the "board.id" field which is supposed to represent an identifier of the board design. The ice driver uses the Product Board Assembly identifier for this. In some cases, the PBA is not present in the NVM. If this happens, devlink dev info will fail with an error. Instead, modify the ice_info_pba function to just exit without filling in the context buffer. This will cause the board.id field to be skipped. Log a dev_dbg message in case someone wants to confirm why board.id is not showing up for them. Fixes: e961b679 ("ice: add board identifier info to devlink .info_get") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20210819223451.245613-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Bob Pearson authored
[ Upstream commit 65a81b61 ] rxe_mcast_add_grp_elem() in rxe_mcast.c calls rxe_alloc() while holding spinlocks which in turn calls kzalloc(size, GFP_KERNEL) which is incorrect. This patch replaces rxe_alloc() by rxe_alloc_locked() which uses GFP_ATOMIC. This bug was caused by the below mentioned commit and failing to handle the need for the atomic allocate. Fixes: 4276fd0d ("RDMA/rxe: Remove RXE_POOL_ATOMIC") Link: https://lore.kernel.org/r/20210813210625.4484-1-rpearsonhpe@gmail.com Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Dinghao Liu authored
[ Upstream commit a036ad08 ] The fixed commit removes all rtnl_lock() and rtnl_unlock() calls in function bnxt_re_dev_init(), but forgets to remove a rtnl_unlock() in the error handling path of bnxt_re_register_netdev(), which may cause a deadlock. This bug is suggested by a static analysis tool. Fixes: c2b777a9 ("RDMA/bnxt_re: Refactor device add/remove functionalities") Link: https://lore.kernel.org/r/20210816085531.12167-1-dinghao.liu@zju.edu.cn Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Tuo Li authored
[ Upstream commit cbe71c61 ] kmalloc_array() is called to allocate memory for tx->descp. If it fails, the function __sdma_txclean() is called: __sdma_txclean(dd, tx); However, in the function __sdma_txclean(), tx-descp is dereferenced if tx->num_desc is not zero: sdma_unmap_desc(dd, &tx->descp[0]); To fix this possible null-pointer dereference, assign the return value of kmalloc_array() to a local variable descp, and then assign it to tx->descp if it is not NULL. Otherwise, go to enomem. Fixes: 77241056 ("IB/hfi1: add driver files") Link: https://lore.kernel.org/r/20210806133029.194964-1-islituo@gmail.com Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Tuo Li <islituo@gmail.com> Tested-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Acked-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Naresh Kumar PBS authored
[ Upstream commit 17f2569d ] Add the missing initialization of srq lock. Fixes: 37cb11ac ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters") Link: https://lore.kernel.org/r/1629343553-5843-3-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Gal Pressman authored
[ Upstream commit f6018cc4 ] The dmabuf memory registrations are missing the restrack handling and hence do not appear in rdma tool. Fixes: bfe0cc6e ("RDMA/uverbs: Add uverbs command for dma-buf based MR registration") Link: https://lore.kernel.org/r/20210812135607.6228-1-galpress@amazon.com Signed-off-by: Gal Pressman <galpress@amazon.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Maor Gottlieb authored
[ Upstream commit da78fe5f ] Fix the below crash when deleting a slave from the unaffiliated list twice. First time when the slave is bound to the master and the second when the slave is unloaded. Fix it by checking if slave is unaffiliated (doesn't have ib device) before removing from the list. RIP: 0010:mlx5r_mp_remove+0x4e/0xa0 [mlx5_ib] Call Trace: auxiliary_bus_remove+0x18/0x30 __device_release_driver+0x177/x220 device_release_driver+0x24/0x30 bus_remove_device+0xd8/0x140 device_del+0x18a/0x3e0 mlx5_rescan_drivers_locked+0xa9/0x210 [mlx5_core] mlx5_unregister_device+0x34/0x60 [mlx5_core] mlx5_uninit_one+0x32/0x100 [mlx5_core] remove_one+0x6e/0xe0 [mlx5_core] pci_device_remove+0x36/0xa0 __device_release_driver+0x177/0x220 device_driver_detach+0x3c/0xa0 unbind_store+0x113/0x130 kernfs_fop_write_iter+0x110/0x1a0 new_sync_write+0x116/0x1a0 vfs_write+0x1ba/0x260 ksys_write+0x5f/0xe0 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 93f82444 ("RDMA/mlx5: Convert mlx5_ib to use auxiliary bus") Link: https://lore.kernel.org/r/17ec98989b0ba88f7adfbad68eb20bce8d567b44.1628587493.git.leonro@nvidia.com Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Li Jinlin authored
commit 02c6dcd5 upstream. We found a hang, the steps to reproduce are as follows: 1. blocking device via scsi_device_set_state() 2. dd if=/dev/sda of=/mnt/t.log bs=1M count=10 3. echo none > /sys/block/sda/queue/scheduler 4. echo "running" >/sys/block/sda/device/state Step 3 and 4 should complete after step 4, but they hang. CPU#0 CPU#1 CPU#2 --------------- ---------------- ---------------- Step 1: blocking device Step 2: dd xxxx ^^^^^^ get request q_usage_counter++ Step 3: switching scheculer elv_iosched_store elevator_switch blk_mq_freeze_queue blk_freeze_queue > blk_freeze_queue_start ^^^^^^ mq_freeze_depth++ > blk_mq_run_hw_queues ^^^^^^ can't run queue when dev blocked > blk_mq_freeze_queue_wait ^^^^^^ Hang here!!! wait q_usage_counter==0 Step 4: running device store_state_field scsi_rescan_device scsi_attach_vpd scsi_vpd_inquiry __scsi_execute blk_get_request blk_mq_alloc_request blk_queue_enter ^^^^^^ Hang here!!! wait mq_freeze_depth==0 blk_mq_run_hw_queues ^^^^^^ dispatch IO, q_usage_counter will reduce to zero blk_mq_unfreeze_queue ^^^^^ mq_freeze_depth-- To fix this, we need to run queue before rescanning device when the device state changes to SDEV_RUNNING. Link: https://lore.kernel.org/r/20210824025921.3277629-1-lijinlin3@huawei.com Fixes: f0f82e24 ("scsi: core: Fix capacity set to zero after offlinining device") Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Li Jinlin <lijinlin3@huawei.com> Signed-off-by: Qiu Laibin <qiulaibin@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wesley Cheng authored
commit 4a1e25c0 upstream. During a USB cable disconnect, or soft disconnect scenario, a pending SETUP transaction may not be completed, leading to the following error: dwc3 a600000.dwc3: timed out waiting for SETUP phase If this occurs, then the entire pullup disable routine is skipped and proper cleanup and halting of the controller does not complete. Instead of returning an error (which is ignored from the UDC perspective), allow the pullup disable routine to continue, which will also handle disabling of EP0/1. This will end any active transfers as well. Ensure to clear any delayed_status also, as the timeout could happen within the STATUS stage. Fixes: bb014736 ("usb: dwc3: gadget: don't clear RUN/STOP when it's invalid to do so") Cc: <stable@vger.kernel.org> Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Link: https://lore.kernel.org/r/20210825042855.7977-1-wcheng@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thinh Nguyen authored
commit 51f1954a upstream. We can't depend on the TRB's HWO bit to determine if the TRB ring is "full". A TRB is only available when the driver had processed it, not when the controller consumed and relinquished the TRB's ownership to the driver. Otherwise, the driver may overwrite unprocessed TRBs. This can happen when many transfer events accumulate and the system is slow to process them and/or when there are too many small requests. If a request is in the started_list, that means there is one or more unprocessed TRBs remained. Check this instead of the TRB's HWO bit whether the TRB ring is full. Fixes: c4233573 ("usb: dwc3: gadget: prepare TRBs on update transfers too") Cc: <stable@vger.kernel.org> Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/e91e975affb0d0d02770686afc3a5b9eb84409f6.1629335416.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kyle Tso authored
commit ef52b4a9 upstream. If the port is going to send Discover_Identity Message, vdm_sm_running flag was intentionally set before entering Ready States in order to avoid the conflict because the port and the port partner might start AMS at almost the same time after entering Ready States. However, the original design has a problem. When the port is doing DR_SWAP from Device to Host, it raises the flag. Later in the tcpm_send_discover_work, the flag blocks the procedure of sending the Discover_Identity and it might never be cleared until disconnection. Since there exists another flag send_discover representing that the port is going to send Discover_Identity or not, it is enough to use that flag to prevent the conflict. Also change the timing of the set/clear of vdm_sm_running to indicate whether the VDM SM is actually running or not. Fixes: c34e85fa ("usb: typec: tcpm: Send DISCOVER_IDENTITY from dedicated work") Cc: stable <stable@vger.kernel.org> Cc: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Kyle Tso <kyletso@google.com> Link: https://lore.kernel.org/r/20210826124201.1562502-1-kyletso@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit c82cacd2 upstream. The recent attempt to handle an unknown ROM state in the commit d143825b ("usb: renesas-xhci: Fix handling of unknown ROM state") resulted in a regression and reverted later by the commit 44cf5360 ("Revert "usb: renesas-xhci: Fix handling of unknown ROM state""). The problem of the former fix was that it treated the failure of firmware loading as a fatal error. Since the firmware files aren't included in the standard linux-firmware tree, most users don't have them, hence they got the non-working system after that. The revert fixed the regression, but also it didn't make the firmware loading triggered even on the devices that do need it. So we need still a fix for them. This is another attempt to handle the unknown ROM state. Like the previous fix, this also tries to load the firmware when ROM shows unknown state. In this patch, however, the failure of a firmware loading (such as a missing firmware file) isn't handled as a fatal error any longer when ROM has been already detected, but it falls back to the ROM mode like before. The error is returned only when no ROM is detected and the firmware loading failed. Along with it, for simplifying the code flow, the detection and the check of ROM is factored out from renesas_fw_check_running() and done in the caller side, renesas_xhci_check_request_fw(). It avoids the redundant ROM checks. The patch was tested on Lenovo Thinkpad T14 gen (BIOS 1.34). Also it was confirmed that no regression is seen on another Thinkpad T14 machine that has worked without the patch, too. Fixes: 44cf5360 ("Revert "usb: renesas-xhci: Fix handling of unknown ROM state"") Cc: stable <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1189207 Link: https://lore.kernel.org/r/20210826124127.14789-1-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Zhengjun Zhang authored
commit 2829a4e3 upstream. Fibocom FG150 is a 5G module based on Qualcomm SDX55 platform, support Sub-6G band. Here are the outputs of lsusb -v and usb-devices: > T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 > D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 > P: Vendor=2cb7 ProdID=010b Rev=04.14 > S: Manufacturer=Fibocom > S: Product=Fibocom Modem_SN:XXXXXXXX > S: SerialNumber=XXXXXXXX > C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA > I: If#=0x0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host > I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host > I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) > I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) > I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) > Bus 002 Device 002: ID 2cb7:010b Fibocom Fibocom Modem_SN:XXXXXXXX > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 3.20 > bDeviceClass 0 > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 9 > idVendor 0x2cb7 Fibocom > idProduct 0x010b > bcdDevice 4.14 > iManufacturer 1 Fibocom > iProduct 2 Fibocom Modem_SN:XXXXXXXX > iSerial 3 XXXXXXXX > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 0x00e6 > bNumInterfaces 5 > bConfigurationValue 1 > iConfiguration 4 RNDIS_DUN_DIAG_ADB > bmAttributes 0xa0 > (Bus Powered) > Remote Wakeup > MaxPower 896mA > Interface Association: > bLength 8 > bDescriptorType 11 > bFirstInterface 0 > bInterfaceCount 2 > bFunctionClass 239 Miscellaneous Device > bFunctionSubClass 4 > bFunctionProtocol 1 > iFunction 7 RNDIS > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 1 > bInterfaceClass 239 Miscellaneous Device > bInterfaceSubClass 4 > bInterfaceProtocol 1 > iInterface 0 > ** UNRECOGNIZED: 05 24 00 10 01 > ** UNRECOGNIZED: 05 24 01 00 01 > ** UNRECOGNIZED: 04 24 02 00 > ** UNRECOGNIZED: 05 24 06 00 01 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x0008 1x 8 bytes > bInterval 9 > bMaxBurst 0 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 1 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 10 CDC Data > bInterfaceSubClass 0 > bInterfaceProtocol 0 > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x8e EP 14 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 6 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x0f EP 15 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 6 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 2 > bAlternateSetting 0 > bNumEndpoints 3 > bInterfaceClass 255 Vendor Specific Class > bInterfaceSubClass 0 > bInterfaceProtocol 0 > iInterface 0 > ** UNRECOGNIZED: 05 24 00 10 01 > ** UNRECOGNIZED: 05 24 01 00 00 > ** UNRECOGNIZED: 04 24 02 02 > ** UNRECOGNIZED: 05 24 06 00 00 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x83 EP 3 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x000a 1x 10 bytes > bInterval 9 > bMaxBurst 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x82 EP 2 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x01 EP 1 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 3 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 255 Vendor Specific Class > bInterfaceSubClass 255 Vendor Specific Subclass > bInterfaceProtocol 48 > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x84 EP 4 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x02 EP 2 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 4 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 255 Vendor Specific Class > bInterfaceSubClass 66 > bInterfaceProtocol 1 > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x03 EP 3 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x85 EP 5 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Binary Object Store Descriptor: > bLength 5 > bDescriptorType 15 > wTotalLength 0x0016 > bNumDeviceCaps 2 > USB 2.0 Extension Device Capability: > bLength 7 > bDescriptorType 16 > bDevCapabilityType 2 > bmAttributes 0x00000006 > BESL Link Power Management (LPM) Supported > SuperSpeed USB Device Capability: > bLength 10 > bDescriptorType 16 > bDevCapabilityType 3 > bmAttributes 0x00 > wSpeedsSupported 0x000f > Device can operate at Low Speed (1Mbps) > Device can operate at Full Speed (12Mbps) > Device can operate at High Speed (480Mbps) > Device can operate at SuperSpeed (5Gbps) > bFunctionalitySupport 1 > Lowest fully-functional device speed is Full Speed (12Mbps) > bU1DevExitLat 1 micro seconds > bU2DevExitLat 500 micro seconds > Device Status: 0x0000 > (Bus Powered) Signed-off-by: Zhengjun Zhang <zhangzhengjun@aicrobo.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit df7b16d1 upstream. This reverts commit 3c18e9ba . These devices do not appear to send a zero-length packet when the transfer size is a multiple of the bulk-endpoint max-packet size. This means that incoming data may not be processed by the driver until a short packet is received or the receive buffer is full. Revert back to using endpoint-sized receive buffers to avoid stalled reads. Reported-by: Paul Größel <pb.g@gmx.de> Link: https://bugzilla.kernel.org/show_bug.cgi?id=214131 Fixes: 3c18e9ba ("USB: serial: ch341: fix character loss at high transfer rates") Cc: stable@vger.kernel.org Cc: Willy Tarreau <w@1wt.eu> Link: https://lore.kernel.org/r/20210824121926.19311-1-johan@kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Borislav Petkov authored
commit c41a4e87 upstream. Building a randconfig here triggered: ERROR: modpost: "pm_suspend_target_state" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined! because the module export of that symbol happens in kernel/power/suspend.c which is enabled with CONFIG_SUSPEND. The ifdef guards in amdgpu_acpi_is_s0ix_supported(), however, test for CONFIG_PM_SLEEP which is defined like this: config PM_SLEEP def_bool y depends on SUSPEND || HIBERNATE_CALLBACKS and that randconfig has: # CONFIG_SUSPEND is not set CONFIG_HIBERNATE_CALLBACKS=y leading to the module export missing. Change the ifdeffery to depend directly on CONFIG_SUSPEND. Fixes: 5706cb3c ("drm/amdgpu: fix checking pmops when PM_SLEEP is not enabled") Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/YSP6Lv53QV0cOAsd@zn.tnic Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christian König authored
commit 2a7b9a84 upstream. For some reason we run into an use case where a BO is already pinned into GTT, but should be pinned into VRAM|GTT again. Handle that case gracefully as well. Reviewed-by: Shashank Sharma <Shashank.sharma@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michel Dänzer authored
commit 32bc8f83 upstream. schedule_delayed_work does not push back the work if it was already scheduled before, so amdgpu_device_delay_enable_gfx_off ran ~100 ms after the first time GFXOFF was disabled and re-enabled, even if GFXOFF was disabled and re-enabled again during those 100 ms. This resulted in frame drops / stutter with the upcoming mutter 41 release on Navi 14, due to constantly enabling GFXOFF in the HW and disabling it again (for getting the GPU clock counter). To fix this, call cancel_delayed_work_sync when the disable count transitions from 0 to 1, and only schedule the delayed work on the reverse transition, not if the disable count was already 0. This makes sure the delayed work doesn't run at unexpected times, and allows it to be lock-free. v2: * Use cancel_delayed_work_sync & mutex_trylock instead of mod_delayed_work. v3: * Make amdgpu_device_delay_enable_gfx_off lock-free (Christian König) v4: * Fix race condition between amdgpu_gfx_off_ctrl incrementing adev->gfx.gfx_off_req_count and amdgpu_device_delay_enable_gfx_off checking for it to be 0 (Evan Quan) Cc: stable@vger.kernel.org Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> # v3 Acked-by: Christian König <christian.koenig@amd.com> # v3 Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Swati Sharma authored
commit 71de496c upstream. drm_dp_dpcd_read/write already has debug error message. Drop redundant error messages which gives false status even if correct value is read in drm_dp_dpcd_read(). v2: -Added fixes tag (Ankit) v3: -Fixed build error (CI) Fixes: 9488a030 ("drm/i915: Add support for enabling link status and recovery") Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.12+ Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Swati Sharma <swati2.sharma@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210812131107.5531-1-swati2.sharma@intel.com (cherry picked from commit b6dfa416 ) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Matthew Brost authored
commit a63bcf08 upstream. A small race exists between intel_gt_retire_requests_timeout and intel_timeline_exit which could result in the syncmap not getting free'd. Rather than work to hard to seal this race, simply cleanup the syncmap on fini. unreferenced object 0xffff88813bc53b18 (size 96): comm "gem_close_race", pid 5410, jiffies 4294917818 (age 1105.600s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 00 00 0a 00 00 00 ................ 00 00 00 00 00 00 00 00 6b 6b 6b 6b 06 00 00 00 ........kkkk.... backtrace: [<00000000120b863a>] __sync_alloc_leaf+0x1e/0x40 [i915] [<00000000042f6959>] __sync_set+0x1bb/0x240 [i915] [<0000000090f0e90f>] i915_request_await_dma_fence+0x1c7/0x400 [i915] [<0000000056a48219>] i915_request_await_object+0x222/0x360 [i915] [<00000000aaac4ee3>] i915_gem_do_execbuffer+0x1bd0/0x2250 [i915] [<000000003c9d830f>] i915_gem_execbuffer2_ioctl+0x405/0xce0 [i915] [<00000000fd7a8e68>] drm_ioctl_kernel+0xb0/0xf0 [drm] [<00000000e721ee87>] drm_ioctl+0x305/0x3c0 [drm] [<000000008b0d8986>] __x64_sys_ioctl+0x71/0xb0 [<0000000076c362a4>] do_syscall_64+0x33/0x80 [<00000000eb7a4831>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by: Matthew Brost <matthew.brost@intel.com> Fixes: 531958f6 ("drm/i915/gt: Track timeline activeness in enter/exit") Cc: <stable@vger.kernel.org> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210730195342.110234-1-matthew.brost@intel.com (cherry picked from commit faf89098 ) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-