- Jan 24, 2020
-
-
Prashant Malani authored
Add the cros-usbpd-notify driver as a subdevice on platforms that support the EC_FEATURE_USB_PD EC feature flag and don't have the ACPI PD notification device defined. This driver allows other cros-ec devices to receive PD event notifications from the Chrome OS Embedded Controller (EC) via a notification chain. Signed-off-by:
Prashant Malani <pmalani@chromium.org> Reviewed-by:
Benson Leung <bleung@chromium.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Marco Felsch authored
The watchdog driver compatible is "dlg,da9062-watchdog" and not "dlg,da9062-wdt". Therefore the mfd-core can't populate the of_node and fwnode. As result the watchdog driver can't parse the devicetree. Fixes: 9b40b030 ("mfd: da9062: Supply core driver") Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Acked-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Charles Keepax authored
Both manual and power on resets have a brief period where the chip will not be accessible immediately afterwards. Extend the time allowed for this from a minimum of 1mS to 2mS based on newer evaluation of the hardware and ensure this reset happens in all reset conditions. Whilst making the change also remove the redundant NULL checks in the reset functions as the GPIO functions already check for this. Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Charles Keepax authored
Accessory detect mode 1 is missing a default, add one to the table. Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Charles Keepax authored
It is advised to wait for the boot done bit to be set before reading any other register, update the driver to respect this. Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Krzysztof Kozlowski authored
Fix up inconsistent usage of upper and lowercase letters in "Samsung" name. "SAMSUNG" is not an abbreviation but a regular trademarked name. Therefore it should be written with lowercase letters starting with capital letter. Although advertisement materials usually use uppercase "SAMSUNG", the lowercase version is used in all legal aspects (e.g. on Wikipedia and in privacy/legal statements on https://www.samsung.com/semiconductor/privacy-global/). Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
yu kuai authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/mfd/tqmx86.c: In function ‘tqmx86_probe’: drivers/mfd/tqmx86.c:161:29: warning: variable ‘i2c_ien’ set but not used I[-Wunused-but-set-variable] It is never used, and so can be removed. Signed-off-by:
yu kuai <yukuai3@huawei.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Linus Walleij authored
The DSI PLLs are handled by the generic clock framework since ages, this code is completely unused and misleading. Delete it. Cc: Stephan Gerhold <stephan@gerhold.net> Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Linus Walleij authored
The display clocks are handled by the generic clock framework since ages, this code is completely unused and misleading. Delete it. Cc: Stephan Gerhold <stephan@gerhold.net> Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Bartosz Golaszewski authored
MAX77650 MFD driver uses regmap_irq API but doesn't select the required REGMAP_IRQ option in Kconfig. This can cause the following build error if regmap irq is not enabled implicitly by someone else: ld: drivers/mfd/max77650.o: in function `max77650_i2c_probe': max77650.c:(.text+0xcb): undefined reference to `devm_regmap_add_irq_chip' ld: max77650.c:(.text+0xdb): undefined reference to `regmap_irq_get_domain' make: *** [Makefile:1079: vmlinux] Error 1 Fix it by adding the missing option. Fixes: d0f60334 ("mfd: Add new driver for MAX77650 PMIC") Reported-by:
Paul Gazzillo <paul@pgazz.com> Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Samuel Holland authored
On AXP288 and newer PMICs, bit 7 of AXP20X_VBUS_IPSOUT_MGMT can be set to prevent using the VBUS input. However, when the VBUS unplugged and plugged back in, the bit automatically resets to zero. We need to set the register as volatile to prevent regmap from caching that bit. Otherwise, regcache will think the bit is already set and not write the register. Fixes: cd532166 ("mfd: axp20x: Fix axp288 volatile ranges") Cc: stable@vger.kernel.org Signed-off-by:
Samuel Holland <samuel@sholland.org> Reviewed-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Linus Walleij authored
Commit f4d41ad8 ("mfd: ab8500: Example using new OF_MFD_CELL MACRO") has a typo error renaming "ab8500-clk" to "abx500-clk" with the result att ALSA SoC audio broke as the clock driver was not probing anymore. Fixed it up. Fixes: f4d41ad8 ("mfd: ab8500: Example using new OF_MFD_CELL MACRO") Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Stephan Gerhold <stephan@gerhold.net> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Andy Shevchenko authored
Intel Jasper Lake has the same LPSS than Intel Ice Lake. Add the new IDs to the list of supported devices. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Matheus Castello authored
max77836 MFD has a fuel gauge that has a low SOC alert feature that is described in: Documentation/devicetree/bindings/power/supply/max17040_battery.txt Adding the reference to the documentation here. Signed-off-by:
Matheus Castello <matheus@castello.eng.br> Acked-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> [Lee: Fix relative path] Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Stephan Gerhold authored
AB8505 support was never fully converted to the device tree. Most of the MFD cells for AB8505 lack an "of_compatible", which prevents them from being configured through the device tree. Align the definition of the AB8505 MFD cells with the ones for AB8500, and add device tree compatibles. Except for GPIO and regulators the compatibles are equal to those used for AB8500 because the hardware does not differ much. Finally, change db8500_prcmu_register_ab8500() to check for the AB8505 device tree node additionally, and probe it if it is found. Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Stephan Gerhold authored
AB8505 can now be configured from the device tree. The configuration is almost identical to AB8500, so just add a note for the nodes/compatibles that differ between the two revisions. Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Paul Kocialkowski authored
The LogiCVC is a display engine which also exposes GPIO functionality. For this reason, it is described as a multi-function device that is expected to provide register access to its children nodes for gpio and display. Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Marco Felsch authored
Add gpio device documentation to make the da9062 gpios available for users. Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Reviewed-by:
Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Marco Felsch authored
Currently the da9062 GPIO's aren't available. The patch adds the support to make these available by adding a gpio device with the corresponding irq resources. Furthermore the patch fixes a minor style issue for the onkey device. Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Oliver Neukum authored
It is not enough to check for the number of endpoints. The types must also be correct. Reported-and-tested-by:
<syzbot+48a2851be24583b864dc@syzkaller.appspotmail.com> Signed-off-by:
Oliver Neukum <oneukum@suse.com> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Chuhong Yuan authored
This driver misuses release_resource + kfree to match request_mem_region, which is incorrect. The right way is to use release_mem_region. Replace the mismatched calls with the right ones to fix it. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Andy Shevchenko authored
Instead of open coded variant use resource_size() and replace weird '- 3' to more understandable '- 4'. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Lee Jones authored
-
Matti Vaittinen authored
ROHM BD71828 PMIC contains 4 pins which can be configured by OTP to be used for general purposes. First 3 can be used as outputs and 4.th pin can be used as input. Allow them to be controlled via GPIO framework. The driver assumes all of the pins are configured as GPIOs and trusts that the reserved pins in other OTP configurations are excluded from control using "gpio-reserved-ranges" device tree property (or left untouched by GPIO users). Typical use for 4.th pin (input) is to use it as HALL sensor input so that this pin state is toggled when HALL sensor detects LID position change (from close to open or open to close). PMIC HW implements some extra logic which allows PMIC to power-up the system when this pin is toggled. Please see the data sheet for details of GPIO options which can be selected by OTP settings. Signed-off-by:
Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Matti Vaittinen authored
ROHM BD71828 PMIC RTC block is from many parts similar to one on BD70528. Support BD71828 RTC using BD70528 RTC driver and avoid re-inventing the wheel. Signed-off-by:
Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Matti Vaittinen authored
When RTC is used in 24H mode (and it is by this driver) the maximum hour value is 24 in BCD. This occupies bits [5:0] - which means correct mask for HOUR register is 0x3f not 0x1f. Fix the mask Fixes: 32a4a4eb ("rtc: bd70528: Initial support for ROHM bd70528 RTC") Signed-off-by:
Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Matti Vaittinen authored
Few ROHM PMICs allow setting the voltage states for different system states like RUN, IDLE, SUSPEND and LPSR. States are then changed via SoC specific mechanisms. bd718x7 driver implemented device-tree parsing functions for these state specific voltages. The parsing functions can be re-used by other ROHM chip drivers like bd71828. Split the generic functions from bd718x7-regulator.c to rohm-regulator.c and export them for other modules to use. Signed-off-by:
Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Matti Vaittinen authored
BD71828GW is a single-chip power management IC for battery-powered portable devices. Add support for controlling BD71828 clk using bd718x7 driver. Signed-off-by:
Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Matti Vaittinen authored
Use gpio_keys to send power input-event to user-space when power button (short) press is detected. Signed-off-by:
Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Matti Vaittinen authored
BD71828GW is a single-chip power management IC for battery-powered portable devices. The IC integrates 7 buck converters, 7 LDOs, and a 1500 mA single-cell linear charger. Also included is a Coulomb counter, a real-time clock (RTC), 3 GPO/regulator control pins, HALL input and a 32.768 kHz clock gate. Add MFD core driver providing interrupt controller facilities and i2c access to sub device drivers. Signed-off-by:
Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Matti Vaittinen authored
ROHM BD71850 PMIC is almost identical to BD71847. Main difference is some initial voltage values for regulators. The BD71850 can be handled by BD71847 driver but adding own compatible makes it clearer for one who creates the DT for board containing this PMIC and allows SW to be differentiating PMICs if needed. Signed-off-by:
Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Matti Vaittinen authored
Thanks to Stephen Boyd I today learned we can use platform_device_id to do device and module matching for MFD sub-devices! Do device matching using the platform_device_id instead of using explicit module_aliases to load modules and custom parent-data field to do module loading and sub-device matching. Cc: Stephen Boyd <sboyd@kernel.org> Signed-off-by:
Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Matti Vaittinen authored
ROHM BD71828 Power management IC integrates 7 buck converters, 7 LDOs, a real-time clock (RTC), 3 GPO/regulator control pins, HALL input and a 32.768 kHz clock gate. Document the dt bindings drivers are using. Signed-off-by:
Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Matti Vaittinen authored
Document ROHM BD71828 PMIC LED driver device tree bindings. Signed-off-by:
Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by:
Rob Herring <robh@kernel.org> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
- Jan 07, 2020
-
-
Claudiu Beznea authored
For HLCDC timing engine configurations bit ATMEL_HLCDC_SIP of ATMEL_HLCDC_SR needs to be polled before applying new config. In case of timeout there is no indicator about this, so, return in case of timeout and also print a message about this. Signed-off-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Claudiu Beznea authored
Add struct device member to struct atmel_hlcdc_regmap to be able to use dev_*() specific logging functions. Signed-off-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
- Dec 09, 2019
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) More jumbo frame fixes in r8169, from Heiner Kallweit. 2) Fix bpf build in minimal configuration, from Alexei Starovoitov. 3) Use after free in slcan driver, from Jouni Hogander. 4) Flower classifier port ranges don't work properly in the HW offload case, from Yoshiki Komachi. 5) Use after free in hns3_nic_maybe_stop_tx(), from Yunsheng Lin. 6) Out of bounds access in mqprio_dump(), from Vladyslav Tarasiuk. 7) Fix flow dissection in dsa TX path, from Alexander Lobakin. 8) Stale syncookie timestampe fixes from Guillaume Nault. [ Did an evil merge to silence a warning introduced by this pull - Linus ] * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits) r8169: fix rtl_hw_jumbo_disable for RTL8168evl net_sched: validate TCA_KIND attribute in tc_chain_tmplt_add() r8169: add missing RX enabling for WoL on RTL8125 vhost/vsock: accept only packets with the right dst_cid net: phy: dp83867: fix hfs boot in rgmii mode net: ethernet: ti: cpsw: fix extra rx interrupt inet: protect against too small mtu values. gre: refetch erspan header from skb->data after pskb_may_pull() pppoe: remove redundant BUG_ON() check in pppoe_pernet tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE() tcp: tighten acceptance of ACKs not matching a child socket tcp: fix rejected syncookies due to stale timestamps lpc_eth: kernel BUG on remove tcp: md5: fix potential overestimation of TCP option space net: sched: allow indirect blocks to bind to clsact in TC net: core: rename indirect block ingress cb function net-sysfs: Call dev_hold always in netdev_queue_add_kobject net: dsa: fix flow dissection on Tx path net/tls: Fix return values to avoid ENOTSUPP net: avoid an indirect call in ____sys_recvmsg() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull more SCSI updates from James Bottomley: "Eleven patches, all in drivers (no core changes) that are either minor cleanups or small fixes. They were late arriving, but still safe for -rc1" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: MAINTAINERS: Add the linux-scsi mailing list to the ISCSI entry scsi: megaraid_sas: Make poll_aen_lock static scsi: sd_zbc: Improve report zones error printout scsi: qla2xxx: Fix qla2x00_request_irqs() for MSI scsi: qla2xxx: unregister ports after GPN_FT failure scsi: qla2xxx: fix rports not being mark as lost in sync fabric scan scsi: pm80xx: Remove unused include of linux/version.h scsi: pm80xx: fix logic to break out of loop when register value is 2 or 3 scsi: scsi_transport_sas: Fix memory leak when removing devices scsi: lpfc: size cpu map by last cpu id set scsi: ibmvscsi_tgt: Remove unneeded variable rc
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Nine cifs/smb3 fixes: - one fix for stable (oops during oplock break) - two timestamp fixes including important one for updating mtime at close to avoid stale metadata caching issue on dirty files (also improves perf by using SMB2_CLOSE_FLAG_POSTQUERY_ATTRIB over the wire) - two fixes for "modefromsid" mount option for file create (now allows mode bits to be set more atomically and accurately on create by adding "sd_context" on create when modefromsid specified on mount) - two fixes for multichannel found in testing this week against different servers - two small cleanup patches" * tag '5.5-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: smb3: improve check for when we send the security descriptor context on create smb3: fix mode passed in on create for modetosid mount option cifs: fix possible uninitialized access and race on iface_list cifs: Fix lookup of SMB connections on multichannel smb3: query attributes on file close smb3: remove unused flag passed into close functions cifs: remove redundant assignment to pointer pneg_ctxt fs: cifs: Fix atime update check vs mtime CIFS: Fix NULL-pointer dereference in smb2_push_mandatory_locks
-