- Jun 02, 2020
-
-
Andrii Nakryiko authored
This commit adds a new MPSC ring buffer implementation into BPF ecosystem, which allows multiple CPUs to submit data to a single shared ring buffer. On the consumption side, only single consumer is assumed. Motivation ---------- There are two distinctive motivators for this work, which are not satisfied by existing perf buffer, which prompted creation of a new ring buffer implementation. - more efficient memory utilization by sharing ring buffer across CPUs; - preserving ordering of events that happen sequentially in time, even across multiple CPUs (e.g., fork/exec/exit events for a task). These two problems are independent, but perf buffer fails to satisfy both. Both are a result of a choice to have per-CPU perf ring buffer. Both can be also solved by having an MPSC implementation of ring buffer. The ordering problem could technically be solved for perf buffer with some in-kernel counting, but given the first one requires an MPSC buffer, the same solution would solve the second problem automatically. Semantics and APIs ------------------ Single ring buffer is presented to BPF programs as an instance of BPF map of type BPF_MAP_TYPE_RINGBUF. Two other alternatives considered, but ultimately rejected. One way would be to, similar to BPF_MAP_TYPE_PERF_EVENT_ARRAY, make BPF_MAP_TYPE_RINGBUF could represent an array of ring buffers, but not enforce "same CPU only" rule. This would be more familiar interface compatible with existing perf buffer use in BPF, but would fail if application needed more advanced logic to lookup ring buffer by arbitrary key. HASH_OF_MAPS addresses this with current approach. Additionally, given the performance of BPF ringbuf, many use cases would just opt into a simple single ring buffer shared among all CPUs, for which current approach would be an overkill. Another approach could introduce a new concept, alongside BPF map, to represent generic "container" object, which doesn't necessarily have key/value interface with lookup/update/delete operations. This approach would add a lot of extra infrastructure that has to be built for observability and verifier support. It would also add another concept that BPF developers would have to familiarize themselves with, new syntax in libbpf, etc. But then would really provide no additional benefits over the approach of using a map. BPF_MAP_TYPE_RINGBUF doesn't support lookup/update/delete operations, but so doesn't few other map types (e.g., queue and stack; array doesn't support delete, etc). The approach chosen has an advantage of re-using existing BPF map infrastructure (introspection APIs in kernel, libbpf support, etc), being familiar concept (no need to teach users a new type of object in BPF program), and utilizing existing tooling (bpftool). For common scenario of using a single ring buffer for all CPUs, it's as simple and straightforward, as would be with a dedicated "container" object. On the other hand, by being a map, it can be combined with ARRAY_OF_MAPS and HASH_OF_MAPS map-in-maps to implement a wide variety of topologies, from one ring buffer for each CPU (e.g., as a replacement for perf buffer use cases), to a complicated application hashing/sharding of ring buffers (e.g., having a small pool of ring buffers with hashed task's tgid being a look up key to preserve order, but reduce contention). Key and value sizes are enforced to be zero. max_entries is used to specify the size of ring buffer and has to be a power of 2 value. There are a bunch of similarities between perf buffer (BPF_MAP_TYPE_PERF_EVENT_ARRAY) and new BPF ring buffer semantics: - variable-length records; - if there is no more space left in ring buffer, reservation fails, no blocking; - memory-mappable data area for user-space applications for ease of consumption and high performance; - epoll notifications for new incoming data; - but still the ability to do busy polling for new data to achieve the lowest latency, if necessary. BPF ringbuf provides two sets of APIs to BPF programs: - bpf_ringbuf_output() allows to *copy* data from one place to a ring buffer, similarly to bpf_perf_event_output(); - bpf_ringbuf_reserve()/bpf_ringbuf_commit()/bpf_ringbuf_discard() APIs split the whole process into two steps. First, a fixed amount of space is reserved. If successful, a pointer to a data inside ring buffer data area is returned, which BPF programs can use similarly to a data inside array/hash maps. Once ready, this piece of memory is either committed or discarded. Discard is similar to commit, but makes consumer ignore the record. bpf_ringbuf_output() has disadvantage of incurring extra memory copy, because record has to be prepared in some other place first. But it allows to submit records of the length that's not known to verifier beforehand. It also closely matches bpf_perf_event_output(), so will simplify migration significantly. bpf_ringbuf_reserve() avoids the extra copy of memory by providing a memory pointer directly to ring buffer memory. In a lot of cases records are larger than BPF stack space allows, so many programs have use extra per-CPU array as a temporary heap for preparing sample. bpf_ringbuf_reserve() avoid this needs completely. But in exchange, it only allows a known constant size of memory to be reserved, such that verifier can verify that BPF program can't access memory outside its reserved record space. bpf_ringbuf_output(), while slightly slower due to extra memory copy, covers some use cases that are not suitable for bpf_ringbuf_reserve(). The difference between commit and discard is very small. Discard just marks a record as discarded, and such records are supposed to be ignored by consumer code. Discard is useful for some advanced use-cases, such as ensuring all-or-nothing multi-record submission, or emulating temporary malloc()/free() within single BPF program invocation. Each reserved record is tracked by verifier through existing reference-tracking logic, similar to socket ref-tracking. It is thus impossible to reserve a record, but forget to submit (or discard) it. bpf_ringbuf_query() helper allows to query various properties of ring buffer. Currently 4 are supported: - BPF_RB_AVAIL_DATA returns amount of unconsumed data in ring buffer; - BPF_RB_RING_SIZE returns the size of ring buffer; - BPF_RB_CONS_POS/BPF_RB_PROD_POS returns current logical possition of consumer/producer, respectively. Returned values are momentarily snapshots of ring buffer state and could be off by the time helper returns, so this should be used only for debugging/reporting reasons or for implementing various heuristics, that take into account highly-changeable nature of some of those characteristics. One such heuristic might involve more fine-grained control over poll/epoll notifications about new data availability in ring buffer. Together with BPF_RB_NO_WAKEUP/BPF_RB_FORCE_WAKEUP flags for output/commit/discard helpers, it allows BPF program a high degree of control and, e.g., more efficient batched notifications. Default self-balancing strategy, though, should be adequate for most applications and will work reliable and efficiently already. Design and implementation ------------------------- This reserve/commit schema allows a natural way for multiple producers, either on different CPUs or even on the same CPU/in the same BPF program, to reserve independent records and work with them without blocking other producers. This means that if BPF program was interruped by another BPF program sharing the same ring buffer, they will both get a record reserved (provided there is enough space left) and can work with it and submit it independently. This applies to NMI context as well, except that due to using a spinlock during reservation, in NMI context, bpf_ringbuf_reserve() might fail to get a lock, in which case reservation will fail even if ring buffer is not full. The ring buffer itself internally is implemented as a power-of-2 sized circular buffer, with two logical and ever-increasing counters (which might wrap around on 32-bit architectures, that's not a problem): - consumer counter shows up to which logical position consumer consumed the data; - producer counter denotes amount of data reserved by all producers. Each time a record is reserved, producer that "owns" the record will successfully advance producer counter. At that point, data is still not yet ready to be consumed, though. Each record has 8 byte header, which contains the length of reserved record, as well as two extra bits: busy bit to denote that record is still being worked on, and discard bit, which might be set at commit time if record is discarded. In the latter case, consumer is supposed to skip the record and move on to the next one. Record header also encodes record's relative offset from the beginning of ring buffer data area (in pages). This allows bpf_ringbuf_commit()/bpf_ringbuf_discard() to accept only the pointer to the record itself, without requiring also the pointer to ring buffer itself. Ring buffer memory location will be restored from record metadata header. This significantly simplifies verifier, as well as improving API usability. Producer counter increments are serialized under spinlock, so there is a strict ordering between reservations. Commits, on the other hand, are completely lockless and independent. All records become available to consumer in the order of reservations, but only after all previous records where already committed. It is thus possible for slow producers to temporarily hold off submitted records, that were reserved later. Reservation/commit/consumer protocol is verified by litmus tests in Documentation/litmus-test/bpf-rb. One interesting implementation bit, that significantly simplifies (and thus speeds up as well) implementation of both producers and consumers is how data area is mapped twice contiguously back-to-back in the virtual memory. This allows to not take any special measures for samples that have to wrap around at the end of the circular buffer data area, because the next page after the last data page would be first data page again, and thus the sample will still appear completely contiguous in virtual memory. See comment and a simple ASCII diagram showing this visually in bpf_ringbuf_area_alloc(). Another feature that distinguishes BPF ringbuf from perf ring buffer is a self-pacing notifications of new data being availability. bpf_ringbuf_commit() implementation will send a notification of new record being available after commit only if consumer has already caught up right up to the record being committed. If not, consumer still has to catch up and thus will see new data anyways without needing an extra poll notification. Benchmarks (see tools/testing/selftests/bpf/benchs/bench_ringbuf.c) show that this allows to achieve a very high throughput without having to resort to tricks like "notify only every Nth sample", which are necessary with perf buffer. For extreme cases, when BPF program wants more manual control of notifications, commit/discard/output helpers accept BPF_RB_NO_WAKEUP and BPF_RB_FORCE_WAKEUP flags, which give full control over notifications of data availability, but require extra caution and diligence in using this API. Comparison to alternatives -------------------------- Before considering implementing BPF ring buffer from scratch existing alternatives in kernel were evaluated, but didn't seem to meet the needs. They largely fell into few categores: - per-CPU buffers (perf, ftrace, etc), which don't satisfy two motivations outlined above (ordering and memory consumption); - linked list-based implementations; while some were multi-producer designs, consuming these from user-space would be very complicated and most probably not performant; memory-mapping contiguous piece of memory is simpler and more performant for user-space consumers; - io_uring is SPSC, but also requires fixed-sized elements. Naively turning SPSC queue into MPSC w/ lock would have subpar performance compared to locked reserve + lockless commit, as with BPF ring buffer. Fixed sized elements would be too limiting for BPF programs, given existing BPF programs heavily rely on variable-sized perf buffer already; - specialized implementations (like a new printk ring buffer, [0]) with lots of printk-specific limitations and implications, that didn't seem to fit well for intended use with BPF programs. [0] https://lwn.net/Articles/779550/ Signed-off-by:
Andrii Nakryiko <andriin@fb.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200529075424.3139988-2-andriin@fb.com Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Anton Protopopov authored
For write-only stacks and queues bpf_map_update_elem should be allowed, but bpf_map_lookup_elem and bpf_map_lookup_and_delete_elem should fail with EPERM. Signed-off-by:
Anton Protopopov <a.s.protopopov@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200527185700.14658-6-a.s.protopopov@gmail.com Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Anton Protopopov authored
The map_lookup_and_delete_elem() function should check for both FMODE_CAN_WRITE and FMODE_CAN_READ permissions because it returns a map element to user space. Fixes: bd513cd0 ("bpf: add MAP_LOOKUP_AND_DELETE_ELEM syscall") Signed-off-by:
Anton Protopopov <a.s.protopopov@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200527185700.14658-5-a.s.protopopov@gmail.com Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Anton Protopopov authored
Make comments inside the test_map_rdonly and test_map_wronly tests consistent with logic. Signed-off-by:
Anton Protopopov <a.s.protopopov@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200527185700.14658-4-a.s.protopopov@gmail.com Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Anton Protopopov authored
The test_map_rdonly and test_map_wronly tests should close file descriptors which they open. Signed-off-by:
Anton Protopopov <a.s.protopopov@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200527185700.14658-3-a.s.protopopov@gmail.com Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Anton Protopopov authored
Trivial fix to a typo in the test_map_wronly test: "read" -> "write" Signed-off-by:
Anton Protopopov <a.s.protopopov@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200527185700.14658-2-a.s.protopopov@gmail.com Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Eelco Chaudron authored
In case the cpu_bufs are sparsely allocated they are not all free'ed. These changes will fix this. Fixes: fb84b822 ("libbpf: add perf buffer API") Signed-off-by:
Eelco Chaudron <echaudro@redhat.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/159056888305.330763.9684536967379110349.stgit@ebuild Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
John Fastabend authored
Lets test using probe* in SCHED_CLS network programs as well just to be sure these keep working. Its cheap to add the extra test and provides a second context to test outside of sk_msg after we generalized probe* helpers to all networking types. Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Yonghong Song <yhs@fb.com> Acked-by:
Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/159033911685.12355.15951980509828906214.stgit@john-Precision-5820-Tower Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
John Fastabend authored
The test itself is not particularly useful but it encodes a common pattern we have. Namely do a sk storage lookup then depending on data here decide if we need to do more work or alternatively allow packet to PASS. Then if we need to do more work consult task_struct for more information about the running task. Finally based on this additional information drop or pass the data. In this case the suspicious check is not so realisitic but it encodes the general pattern and uses the helpers so we test the workflow. This is a load test to ensure verifier correctly handles this case. Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/159033909665.12355.6166415847337547879.stgit@john-Precision-5820-Tower Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
John Fastabend authored
Add helpers to use local socket storage. Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/159033907577.12355.14740125020572756560.stgit@john-Precision-5820-Tower Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
John Fastabend authored
Often it is useful when applying policy to know something about the task. If the administrator has CAP_SYS_ADMIN rights then they can use kprobe + networking hook and link the two programs together to accomplish this. However, this is a bit clunky and also means we have to call both the network program and kprobe program when we could just use a single program and avoid passing metadata through sk_msg/skb->cb, socket, maps, etc. To accomplish this add probe_* helpers to bpf_base_func_proto programs guarded by a perfmon_capable() check. New supported helpers are the following, BPF_FUNC_get_current_task BPF_FUNC_probe_read_user BPF_FUNC_probe_read_kernel BPF_FUNC_probe_read_user_str BPF_FUNC_probe_read_kernel_str Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/159033905529.12355.4368381069655254932.stgit@john-Precision-5820-Tower Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
John Fastabend authored
Add these generic helpers that may be useful to use from sk_msg programs. The helpers do not depend on ctx so we can simply add them here, BPF_FUNC_perf_event_output BPF_FUNC_get_current_uid_gid BPF_FUNC_get_current_pid_tgid BPF_FUNC_get_current_cgroup_id BPF_FUNC_get_current_ancestor_cgroup_id BPF_FUNC_get_cgroup_classid Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/159033903373.12355.15489763099696629346.stgit@john-Precision-5820-Tower Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Yauheni Kaliuta authored
Since dynamic symbols are used for dynamic linking it makes sense to use them (readelf --dyn-syms) for abi check. Found with some configuration on powerpc where linker puts local *.plt_call.* symbols into .so. Signed-off-by:
Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200525061846.16524-1-yauheni.kaliuta@redhat.com Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Chris Packham authored
Change 'handeled' to 'handled'. Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200525230025.14470-1-chris.packham@alliedtelesis.co.nz Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Nikolay Borisov authored
Current 'make install' results in only pkg-config and library binaries being installed. For consistency also install headers as part of "make install" Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200526174612.5447-1-nborisov@suse.com Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Eelco Chaudron authored
This new API, perf_buffer__consume, can be used as follows: - When you have a perf ring where wakeup_events is higher than 1, and you have remaining data in the rings you would like to pull out on exit (or maybe based on a timeout). - For low latency cases where you burn a CPU that constantly polls the queues. Signed-off-by:
Eelco Chaudron <echaudro@redhat.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/159048487929.89441.7465713173442594608.stgit@ebuild Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Lukas Bulwahn authored
Commit 2b43470a ("xsk: Introduce AF_XDP buffer allocation API") added a new header file include/net/xsk_buff_pool.h, but commit 28bee21d ("MAINTAINERS, xsk: Update AF_XDP section after moves/adds") added a file entry referring to include/net/xsk_buffer_pool.h. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains: warning: no file matches F: include/net/xsk_buffer_pool.h Adjust the entry in XDP SOCKETS to the actual file name. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200525141553.7035-1-lukas.bulwahn@gmail.com Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Jakub Sitnicki authored
System calls encode returned errors as negative values. Fix a typo that breaks this convention for bpf(LINK_UPDATE) when bpf_link doesn't support update operation. Fixes: f9d04127 ("bpf: Refactor bpf_link update handling") Signed-off-by:
Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200525122928.1164495-1-jakub@cloudflare.com Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Tobias Klauser authored
btf__parse_raw and btf__parse_elf return negative error numbers wrapped in an ERR_PTR, so the extracted value needs to be negated before passing them to strerror which expects a positive error number. Before: Error: failed to load BTF from .../vmlinux: Unknown error -2 After: Error: failed to load BTF from .../vmlinux: No such file or directory Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200525135421.4154-1-tklauser@distanz.ch Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Quentin Monnet authored
Following the introduction of CAP_BPF, and the switch from CAP_SYS_ADMIN to other capabilities for various BPF features, update the capability checks (and potentially, drops) in bpftool for feature probes. Because bpftool and/or the system might not know of CAP_BPF yet, some caution is necessary: - If compiled and run on a system with CAP_BPF, check CAP_BPF, CAP_SYS_ADMIN, CAP_PERFMON, CAP_NET_ADMIN. - Guard against CAP_BPF being undefined, to allow compiling bpftool from latest sources on older systems. If the system where feature probes are run does not know of CAP_BPF, stop checking after CAP_SYS_ADMIN, as this should be the only capability required for all the BPF probing. - If compiled from latest sources on a system without CAP_BPF, but later executed on a newer system with CAP_BPF knowledge, then we only test CAP_SYS_ADMIN. Some probes may fail if the bpftool process has CAP_SYS_ADMIN but misses the other capabilities. The alternative would be to redefine the value for CAP_BPF in bpftool, but this does not look clean, and the case sounds relatively rare anyway. Note that libcap offers a cap_to_name() function to retrieve the name of a given capability (e.g. "cap_sys_admin"). We do not use it because deriving the names from the macros looks simpler than using cap_to_name() (doing a strdup() on the string) + cap_free() + handling the case of failed allocations, when we just want to use the name of the capability in an error message. The checks when compiling without libcap (i.e. root versus non-root) are unchanged. v2: - Do not allocate cap_list dynamically. - Drop BPF-related capabilities when running with "unprivileged", even if we didn't have the full set in the first place (in v1, we would skip dropping them in that case). - Keep track of what capabilities we have, print the names of the missing ones for privileged probing. - Attempt to drop only the capabilities we actually have. - Rename a couple variables. Signed-off-by:
Quentin Monnet <quentin@isovalent.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200523010247.20654-1-quentin@isovalent.com Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Quentin Monnet authored
This is a clean-up for the formatting of the do_help functions for bpftool's subcommands. The following fixes are included: - Do not use argv[-2] for "iter" help message, as the help is shown by default if no "iter" action is selected, resulting in messages looking like "./bpftool bpftool pin...". - Do not print unused HELP_SPEC_PROGRAM in help message for "bpftool link". - Andrii used argument indexing to avoid having multiple occurrences of bin_name and argv[-2] in the fprintf() for the help message, for "bpftool gen" and "bpftool link". Let's reuse this for all other help functions. We can remove up to thirty arguments for the "bpftool map" help message. - Harmonise all functions, e.g. use ending quotes-comma on a separate line. Signed-off-by:
Quentin Monnet <quentin@isovalent.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200523010751.23465-1-quentin@isovalent.com Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Vladimir Oltean authored
Newer C compilers are complaining about the fact that there are no function prototypes in sja1105_vl.c for the non-static functions. Give them what they want. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2020-05-31 This series contains updates to the ice driver only. Brett modifies the driver to allow users to clear a VF's administratively set MAC address on the PF. Fixes the driver to recognize an existing VLAN tag when DMAC/SMAC is enabled in a packet. Fixes an issue, so that VF's are reset after any VF port VLAN modifications are made on the PF. Made sure the register QRXFLXP_CNTXT is cleared before writing a new value to ensure the previous value is not passed forward. Updates the PF to allow the VF to request a reset as soon as it has been initialized. Fixes an issue to ensure when a VSI is created, it uses the current coalesce value, not the default value. Paul allows untrusted VF's to add 16 filters. Dan increases the timeout needed after a PFR to allow ample time for package download. Chinh adjust the define value for the number of PHY speeds we currently support. Changes the driver to ignore EMODE error when configuring the PHY. Jesse fixes an issue which was preventing a user from configuring the interface before bringing it up. Henry fixes the logic for adding back perfect flows after flow director filter does a deletion. Bruce fixes line wrappings to make it more consistent. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Roopa Prabhu authored
fix dereference of nexthop group in fdb nexthop group update validation path. Fixes: 1274e1cc ("vxlan: ecmp support for mac fdb entries") Reported-by:
Ido Schimmel <idosch@idosch.org> Suggested-by:
Ido Schimmel <idosch@idosch.org> Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Al Viro authored
no point getting compat_cmsghdr field-by-field Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ioana Ciornei says: ==================== dpaa2-eth: add PFC support This patch set adds support for Priority Flow Control in DPAA2 Ethernet devices. The first patch make the necessary changes so that multiple traffic classes are configured. The dequeue priority of the maximum 8 traffic classes is configured to be equal. The second patch adds a static distribution to said traffic classes based on the VLAN PCP field. In the future, this could be extended through the .setapp() DCB callback for dynamic configuration. Also, add support for the congestion group taildrop mechanism that allows us to control the number of frames that can accumulate on a group of Rx frame queues belonging to the same traffic class. The basic subset of the DCB ops is implemented so that the user can query the number of PFC capable traffic classes, their state and reconfigure them if necessary. Changes in v3: - add patches 6-7 which add the PFC functionality - patch 2/7: revert to explicitly cast mask to u16 * to not get into sparse warnings Changes in v4: - really fix the sparse warnings in 2/7 ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ioana Ciornei authored
Leave congestion group taildrop enabled for all traffic classes when PFC is enabled. Notification threshold is low enough such that it will be hit first and this also ensures that FQs on traffic classes which are not PFC enabled won't drain the buffer pool. FQ taildrop threshold is kept disabled as long as any form of flow control is on. Since FQ taildrop works with bytes, not number of frames, we can't guarantee it will not interfere with the congestion notification mechanism for all frame sizes. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ioana Ciornei authored
Add support in dpaa2-eth for PFC (Priority Flow Control) through the DCB ops. Instruct the hardware to respond to received PFC frames. Current firmware doesn't allow us to selectively enable PFC on the Rx side for some priorities only, so we will react to all incoming PFC frames (and stop transmitting on the traffic classes specified in the frame). Also, configure the hardware to generate PFC frames based on Rx congestion notifications. When a certain number of frames accumulate in the ingress queues corresponding to a traffic class, priority flow control frames are generated for that TC. The number of PFC traffic classes available can be queried through lldptool. Also, which of those traffic classes have PFC enabled is also controlled through the same dcbnl_rtnl_ops callbacks. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ioana Radulescu authored
Now that we have congestion group taildrop configured at all times, we can afford to increase the frame queue taildrop threshold; this will ensure a better response when receiving bursts of large-sized frames. Also decouple the buffer pool count from the Rx FQ taildrop threshold, as above change would increase it too much. Instead, keep the old count as a hardcoded value. With the new limits, we try to ensure that: * we allow enough leeway for large frame bursts (by buffering enough of them in queues to avoid heavy dropping in case of bursty traffic, but when overall ingress bandwidth is manageable) * allow pending frames to be evenly spread between ingress FQs, regardless of frame size * avoid dropping frames due to the buffer pool being empty; this is not a bad behaviour per se, but system overall response is more linear and predictable when frames are dropped at frame queue/group level. Signed-off-by:
Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ioana Radulescu authored
The increase in number of ingress frame queues means we now risk depleting the buffer pool before the FQ taildrop kicks in. Congestion group taildrop allows us to control the number of frames that can accumulate on a group of Rx frame queues belonging to the same traffic class. This setting coexists with the frame queue based taildrop: whichever limit gets hit first triggers the frame drop. Signed-off-by:
Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ioana Radulescu authored
Add convenient helper functions that determines whether Rx/Tx pause frames are enabled based on link state flags received from firmware. Signed-off-by:
Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ioana Radulescu authored
Configure static ingress classification based on VLAN PCP field. If the DPNI doesn't have enough traffic classes to accommodate all priority levels, the lowest ones end up on TC 0 (default on miss). Signed-off-by:
Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ioana Radulescu authored
The firmware reserves for each DPNI a number of RX frame queues equal to the number of configured flows x number of configured traffic classes. Current driver configuration directs all incoming traffic to FQs corresponding to TC0, leaving all other priority levels unused. Start adding support for multiple ingress traffic classes, by configuring the FQs associated with all priority levels, not just TC0. All settings that are per-TC, such as those related to hashing and flow steering, are also updated. Signed-off-by:
Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Walle authored
Don't export __bcm_phy_enable_rdb_access() and __bcm_phy_enable_legacy_access() functions. They aren't used outside this module and it was forgotten to provide a prototype for these functions. Just make them static for now. Fixes: 11ecf8c5 ("net: phy: broadcom: add cable test support") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Michael Walle <michael@walle.cc> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Willem de Bruijn authored
Tun in IFF_NAPI_FRAGS mode calls napi_gro_frags. Unlike netif_rx and netif_gro_receive, this expects skb->data to point to the mac layer. But skb_probe_transport_header, __skb_get_hash_symmetric, and xdp_do_generic in tun_get_user need skb->data to point to the network header. Flow dissection also needs skb->protocol set, so eth_type_trans has to be called. Ensure the link layer header lies in linear as eth_type_trans pulls ETH_HLEN. Then take the same code paths for frags as for not frags. Push the link layer header back just before calling napi_gro_frags. By pulling up to ETH_HLEN from frag0 into linear, this disables the frag0 optimization in the special case when IFF_NAPI_FRAGS is used with zero length iov[0] (and thus empty skb->linear). Fixes: 90e33d45 ("tun: enable napi_gro_frags() for TUN/TAP driver") Signed-off-by:
Willem de Bruijn <willemb@google.com> Acked-by:
Petar Penkov <ppenkov@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Guillaume Nault authored
Compiling with W=1 gives the following warning: net/sched/cls_flower.c:731:1: warning: ‘mpls_opts_policy’ defined but not used [-Wunused-const-variable=] The TCA_FLOWER_KEY_MPLS_OPTS contains a list of TCA_FLOWER_KEY_MPLS_OPTS_LSE. Therefore, the attributes all have the same type and we can't parse the list with nla_parse*() and have the attributes validated automatically using an nla_policy. fl_set_key_mpls_opts() properly verifies that all attributes in the list are TCA_FLOWER_KEY_MPLS_OPTS_LSE. Then fl_set_key_mpls_lse() uses nla_parse_nested() on all these attributes, thus verifying that they have the NLA_F_NESTED flag. So we can safely drop the mpls_opts_policy. Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Guillaume Nault <gnault@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Horatiu Vultur says: ==================== bridge: mrp: Add support for MRA role This patch series extends the MRP with the MRA role. A node that has the MRA role can behave as a MRM or as a MRC. In case there are multiple nodes in the topology that has the MRA role then only one node can behave as MRM and all the others need to be have as MRC. The node that has the higher priority(lower value) will behave as MRM. A node that has the MRA role and behaves as MRC, it just needs to forward the MRP_Test frames between the ring ports but also it needs to detect in case it stops receiving MRP_Test frames. In that case it would try to behave as MRM. v2: - add new patch that fixes sparse warnings - fix parsing of prio attribute ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Horatiu Vultur authored
A node that has the MRA role, it can behave as MRM or MRC. Initially it starts as MRM and sends MRP_Test frames on both ring ports. If it detects that there are MRP_Test send by another MRM, then it checks if these frames have a lower priority than itself. In this case it would send MRP_Nack frames to notify the other node that it needs to stop sending MRP_Test frames. If it receives a MRP_Nack frame then it stops sending MRP_Test frames and starts to behave as a MRC but it would continue to monitor the MRP_Test frames send by MRM. If at a point the MRM stops to send MRP_Test frames it would get the MRM role and start to send MRP_Test frames. Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Horatiu Vultur authored
Each MRP instance has a priority, a lower value means a higher priority. The priority of MRP instance is stored in MRP_Test frame in this way all the MRP nodes in the ring can see other nodes priority. Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Horatiu Vultur authored
Replace u16/u32 with be16/be32 in the MRP frame types. This fixes sparse warnings like: warning: cast to restricted __be16 Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-