- Nov 03, 2021
-
-
Trevor Woerner authored
commit ace19b99 upstream. A hard hang is observed whenever the ethernet interface is brought down. If the PHY is stopped before the LPC core block is reset, the SoC will hang. Comparing lpc_eth_close() and lpc_eth_open() I re-arranged the ordering of the functions calls in lpc_eth_close() to reset the hardware before stopping the PHY. Fixes: b7370112 ("lpc32xx: Added ethernet driver") Signed-off-by:
Trevor Woerner <twoerner@gmail.com> Acked-by:
Vladimir Zapolskiy <vz@mleia.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yuiko Oshino authored
commit 95a359c9 upstream. The dma failure was reported in the raspberry pi github (issue #4117). https://github.com/raspberrypi/linux/issues/4117 The use of dma_set_mask_and_coherent fixes the issue. Tested on 32/64-bit raspberry pi CM4 and 64-bit ubuntu x86 PC with EVB-LAN7430. Fixes: 23f0703c ("lan743x: Add main source files for new lan743x driver") Signed-off-by:
Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yuiko Oshino authored
commit d6423d2e upstream. The driver needs to clean up and return when the initialization fails on resume. Fixes: 23f0703c ("lan743x: Add main source files for new lan743x driver") Signed-off-by:
Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ido Schimmel authored
commit 75963576 upstream. When the driver fails to allocate a new Rx buffer, it passes an empty Rx descriptor (contains zero address and size) to the device and marks it as invalid by setting the skb pointer in the descriptor's metadata to NULL. After processing enough Rx descriptors, the driver will try to process the invalid descriptor, but will return immediately seeing that the skb pointer is NULL. Since the driver no longer passes new Rx descriptors to the device, the Rx queue will eventually become full and the device will start to drop packets. Fix this by recycling the received packet if allocation of the new packet failed. This means that allocation is no longer performed at the end of the Rx routine, but at the start, before tearing down the DMA mapping of the received packet. Remove the comment about the descriptor being zeroed as it is no longer correct. This is OK because we either use the descriptor as-is (when recycling) or overwrite its address and size fields with that of the newly allocated Rx buffer. The issue was discovered when a process ("perf") consumed too much memory and put the system under memory pressure. It can be reproduced by injecting slab allocation failures [1]. After the fix, the Rx queue no longer comes to a halt. [1] # echo 10 > /sys/kernel/debug/failslab/times # echo 1000 > /sys/kernel/debug/failslab/interval # echo 100 > /sys/kernel/debug/failslab/probability FAULT_INJECTION: forcing a failure. name failslab, interval 1000, probability 100, space 0, times 8 [...] Call Trace: <IRQ> dump_stack_lvl+0x34/0x44 should_fail.cold+0x32/0x37 should_failslab+0x5/0x10 kmem_cache_alloc_node+0x23/0x190 __alloc_skb+0x1f9/0x280 __netdev_alloc_skb+0x3a/0x150 mlxsw_pci_rdq_skb_alloc+0x24/0x90 mlxsw_pci_cq_tasklet+0x3dc/0x1200 tasklet_action_common.constprop.0+0x9f/0x100 __do_softirq+0xb5/0x252 irq_exit_rcu+0x7a/0xa0 common_interrupt+0x83/0xa0 </IRQ> asm_common_interrupt+0x1e/0x40 RIP: 0010:cpuidle_enter_state+0xc8/0x340 [...] mlxsw_spectrum2 0000:06:00.0: Failed to alloc skb for RDQ Fixes: eda6500a ("mlxsw: Add PCI bus implementation") Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/20211024064014.1060919-1-idosch@idosch.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Guenter Roeck authored
commit 4a089e95 upstream. nios2:allmodconfig builds fail with make[1]: *** No rule to make target 'arch/nios2/boot/dts/""', needed by 'arch/nios2/boot/dts/built-in.a'. Stop. make: [Makefile:1868: arch/nios2/boot/dts] Error 2 (ignored) This is seen with compile tests since those enable NIOS2_DTB_SOURCE_BOOL, which in turn enables NIOS2_DTB_SOURCE. This causes the build error because the default value for NIOS2_DTB_SOURCE is an empty string. Disable NIOS2_DTB_SOURCE_BOOL for compile tests to avoid the error. Fixes: 2fc8483f ("nios2: Build infrastructure") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Dinh Nguyen <dinguyen@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jonas Gorski authored
commit 85fe6415 upstream. of_property_read_u32 returns 0 on success, not true, so we need to invert the check to actually take over the provided ngpio value. Fixes: 6a41b6c5 ("gpio: Add xgs-iproc driver") Signed-off-by:
Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mark Zhang authored
commit 64733956 upstream. When copying the device name, the length of the data memcpy copied exceeds the length of the source buffer, which cause the KASAN issue below. Use strscpy_pad() instead. BUG: KASAN: slab-out-of-bounds in ib_nl_set_path_rec_attrs+0x136/0x320 [ib_core] Read of size 64 at addr ffff88811a10f5e0 by task rping/140263 CPU: 3 PID: 140263 Comm: rping Not tainted 5.15.0-rc1+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack_lvl+0x57/0x7d print_address_description.constprop.0+0x1d/0xa0 kasan_report+0xcb/0x110 kasan_check_range+0x13d/0x180 memcpy+0x20/0x60 ib_nl_set_path_rec_attrs+0x136/0x320 [ib_core] ib_nl_make_request+0x1c6/0x380 [ib_core] send_mad+0x20a/0x220 [ib_core] ib_sa_path_rec_get+0x3e3/0x800 [ib_core] cma_query_ib_route+0x29b/0x390 [rdma_cm] rdma_resolve_route+0x308/0x3e0 [rdma_cm] ucma_resolve_route+0xe1/0x150 [rdma_ucm] ucma_write+0x17b/0x1f0 [rdma_ucm] vfs_write+0x142/0x4d0 ksys_write+0x133/0x160 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f26499aa90f Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 29 fd ff ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 5c fd ff ff 48 RSP: 002b:00007f26495f2dc0 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00000000000007d0 RCX: 00007f26499aa90f RDX: 0000000000000010 RSI: 00007f26495f2e00 RDI: 0000000000000003 RBP: 00005632a8315440 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000293 R12: 00007f26495f2e00 R13: 00005632a83154e0 R14: 00005632a8315440 R15: 00005632a830a810 Allocated by task 131419: kasan_save_stack+0x1b/0x40 __kasan_kmalloc+0x7c/0x90 proc_self_get_link+0x8b/0x100 pick_link+0x4f1/0x5c0 step_into+0x2eb/0x3d0 walk_component+0xc8/0x2c0 link_path_walk+0x3b8/0x580 path_openat+0x101/0x230 do_filp_open+0x12e/0x240 do_sys_openat2+0x115/0x280 __x64_sys_openat+0xce/0x140 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 2ca546b9 ("IB/sa: Route SA pathrecord query through netlink") Link: https://lore.kernel.org/r/72ede0f6dab61f7f23df9ac7a70666e07ef314b0.1635055496.git.leonro@nvidia.com Signed-off-by:
Mark Zhang <markzhang@nvidia.com> Reviewed-by:
Mark Bloch <mbloch@nvidia.com> Signed-off-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Chan authored
commit 0c57eeec upstream. Drivers call netdev_set_num_tc() and then netdev_set_tc_queue() to set the queue count and offset for each TC. So the queue count and offset for the TCs may be zero for a short period after dev->num_tc has been set. If a TX packet is being transmitted at this time in the code path netdev_pick_tx() -> skb_tx_hash(), skb_tx_hash() may see nonzero dev->num_tc but zero qcount for the TC. The while loop that keeps looping while hash >= qcount will not end. Fix it by checking the TC's qcount to be nonzero before using it. Fixes: eadec877 ("net: Add support for subordinate traffic classes to netdev_pick_tx") Reviewed-by:
Andy Gospodarek <gospo@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Janusz Dziedzic authored
commit 689a0a9f upstream. Without the patch we fail: $ sudo brctl addbr br0 $ sudo brctl addif br0 wlp1s0 $ sudo iw wlp1s0 set 4addr on command failed: Device or resource busy (-16) Last command failed but iface was already in 4addr mode. Fixes: ad4bb6f8 ("cfg80211: disallow bridging managed/adhoc interfaces") Signed-off-by:
Janusz Dziedzic <janusz.dziedzic@gmail.com> Link: https://lore.kernel.org/r/20211024201546.614379-1-janusz.dziedzic@gmail.com [add fixes tag, fix indentation, edit commit log] Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xin Long authored
commit f7a1e76d upstream. Currently in net_ns_get_ownership() it may not be able to set uid or gid if make_kuid or make_kgid returns an invalid value, and an uninit-value issue can be triggered by this. This patch is to fix it by initializing the uid and gid before calling net_ns_get_ownership(), as it does in kobject_get_ownership() Fixes: e6dee9f3 ("net-sysfs: add netdev_change_owner()") Reported-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pavel Skripkin authored
commit 6f68cd63 upstream. Syzbot reported ODEBUG warning in batadv_nc_mesh_free(). The problem was in wrong error handling in batadv_mesh_init(). Before this patch batadv_mesh_init() was calling batadv_mesh_free() in case of any batadv_*_init() calls failure. This approach may work well, when there is some kind of indicator, which can tell which parts of batadv are initialized; but there isn't any. All written above lead to cleaning up uninitialized fields. Even if we hide ODEBUG warning by initializing bat_priv->nc.work, syzbot was able to hit GPF in batadv_nc_purge_paths(), because hash pointer in still NULL. [1] To fix these bugs we can unwind batadv_*_init() calls one by one. It is good approach for 2 reasons: 1) It fixes bugs on error handling path 2) It improves the performance, since we won't call unneeded batadv_*_free() functions. So, this patch makes all batadv_*_init() clean up all allocated memory before returning with an error to no call correspoing batadv_*_free() and open-codes batadv_mesh_free() with proper order to avoid touching uninitialized fields. Link: https://lore.kernel.org/netdev/000000000000c87fbd05cef6bcb0@google.com/ [1] Reported-and-tested-by:
<syzbot+28b0702ada0bf7381f58@syzkaller.appspotmail.com> Fixes: c6c8fea2 ("net: Add batman-adv meshing protocol") Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Acked-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yang Yingliang authored
commit 55e6d803 upstream. In regcache_rbtree_insert_to_block(), when 'present' realloc failed, the 'blk' which is supposed to assign to 'rbnode->block' will be freed, so 'rbnode->block' points a freed memory, in the error handling path of regcache_rbtree_init(), 'rbnode->block' will be freed again in regcache_rbtree_exit(), KASAN will report double-free as follows: BUG: KASAN: double-free or invalid-free in kfree+0xce/0x390 Call Trace: slab_free_freelist_hook+0x10d/0x240 kfree+0xce/0x390 regcache_rbtree_exit+0x15d/0x1a0 regcache_rbtree_init+0x224/0x2c0 regcache_init+0x88d/0x1310 __regmap_init+0x3151/0x4a80 __devm_regmap_init+0x7d/0x100 madera_spi_probe+0x10f/0x333 [madera_spi] spi_probe+0x183/0x210 really_probe+0x285/0xc30 To fix this, moving up the assignment of rbnode->block to immediately after the reallocation has succeeded so that the data structure stays valid even if the second reallocation fails. Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: 3f4ff561 ("regmap: rbtree: Make cache_present bitmap per node") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20211012023735.1632786-1-yangyingliang@huawei.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jim Quinlan authored
commit f33eb7f2 upstream. The readl_poll_timeout() should complete when the status bit is a 1, not 0. Fixes: 4cf176e5 ("reset: Add Broadcom STB RESCAL reset controller") Signed-off-by:
Jim Quinlan <jim2101024@gmail.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210914221122.62315-1-f.fainelli@gmail.com Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Clément Bœsch authored
commit 0764e365 upstream. RX and TX delay are provided by ethernet PHY. Reflect that in ethernet node. Fixes: 44a94c7e ("arm64: dts: allwinner: H5: Restore EMAC changes") Signed-off-by:
Clément Bœsch <u@pkh.me> Reviewed-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210905002027.171984-1-u@pkh.me Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Patrisious Haddad authored
commit 1ab52ac1 upstream. Currently, the driver doesn't set the PCP-based priority for DCT, hence DCT response packets are transmitted without user priority. Fix it by setting user provided priority in the eth_prio field in the DCT context, which in turn sets the value in the transmitted packet. Fixes: 776a3906 ("IB/mlx5: Add support for DC target QP") Link: https://lore.kernel.org/r/5fd2d94a13f5742d8803c218927322257d53205c.1633512672.git.leonro@nvidia.com Signed-off-by:
Patrisious Haddad <phaddad@nvidia.com> Reviewed-by:
Maor Gottlieb <maorg@nvidia.com> Signed-off-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rakesh Babu authored
commit e77bcdd1 upstream. Currently, we are using a fixed buffer size of length 2048 to display rsrc_alloc output. As a result a maximum of 2048 characters of rsrc_alloc output is displayed, which may lead sometimes to display only partial output. This patch fixes this dependency on max limit of buffer size and displays all PF VF entries. Each column of the debugfs entry "rsrc_alloc" uses a fixed width of 12 characters to print the list of LFs of each block for a PF/VF. If the length of list of LFs of a block exceeds this fixed width then the list gets truncated and displays only a part of the list. This patch fixes this by using the maximum possible length of list of LFs among all blocks of all PFs and VFs entries as the width size. Fixes: f7884097 ("octeontx2-af: Formatting debugfs entry rsrc_alloc.") Fixes: 23205e6d ("octeontx2-af: Dump current resource provisioning status") Signed-off-by:
Rakesh Babu <rsaladi2@marvell.com> Signed-off-by:
Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by:
Sunil Kovvuri Goutham <Sunil.Goutham@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Varun Prakash authored
commit ce7723e9 upstream. With commit db5ad6b7 ("nvme-tcp: try to send request in queue_rq context") r2t and response PDU can get processed while send function is executing. Current data digest send code uses req->offset after kernel_sendmsg(), this creates a race condition where req->offset gets reset before it is used in send function. This can happen in two cases - 1. Target sends r2t PDU which resets req->offset. 2. Target send response PDU which completes the req and then req is used for a new command, nvme_tcp_setup_cmd_pdu() resets req->offset. Fix this by storing req->offset in a local variable and using this local variable after kernel_sendmsg(). Fixes: db5ad6b7 ("nvme-tcp: try to send request in queue_rq context") Signed-off-by:
Varun Prakash <varun@chelsio.com> Reviewed-by:
Keith Busch <kbusch@kernel.org> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Varun Prakash authored
commit d89b9f3b upstream. ddgst is of type __le32, &req->ddgst + req->offset increases &req->ddgst by 4 * req->offset, fix this by type casting &req->ddgst to u8 *. Fixes: 3f2304f8 ("nvme-tcp: add NVMe over TCP host driver") Signed-off-by:
Varun Prakash <varun@chelsio.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Varun Prakash authored
commit e790de54 upstream. exp_ddgst is of type __le32, &cmd->exp_ddgst + cmd->offset increases &cmd->exp_ddgst by 4 * cmd->offset, fix this by type casting &cmd->exp_ddgst to u8 *. Fixes: 872d26a3 ("nvmet-tcp: add NVMe over TCP target driver") Signed-off-by:
Varun Prakash <varun@chelsio.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mike Marciniszyn authored
commit 13bac861 upstream. sc_disable() after having disabled the send context wakes up any waiters by calling hfi1_qp_wakeup() while holding the waitlock for the sc. This is contrary to the model for all other calls to hfi1_qp_wakeup() where the waitlock is dropped and a local is used to drive calls to hfi1_qp_wakeup(). Fix by moving the sc->piowait into a local list and driving the wakeup calls from the list. Fixes: 099a884b ("IB/hfi1: Handle wakeup of orphaned QPs for pio") Link: https://lore.kernel.org/r/20211013141852.128104.2682.stgit@awfm-01.cornelisnetworks.com Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Reported-by:
TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mike Marciniszyn authored
commit d39bf40e upstream. Overflowing either addrlimit or bytes_togo can allow userspace to trigger a buffer overflow of kernel memory. Check for overflows in all the places doing math on user controlled buffers. Fixes: f931551b ("IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters") Link: https://lore.kernel.org/r/20211012175519.7298.77738.stgit@awfm-01.cornelisnetworks.com Reported-by:
Ilja Van Sprundel <ivansprundel@ioactive.com> Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xu Kuohai authored
commit fda7a387 upstream. 1. The ufd in generic_map_update_batch() should be read from batch.map_fd; 2. A call to fdget() should be followed by a symmetric call to fdput(). Fixes: aa2e93b8 ("bpf: Add generic support for update and delete batch ops") Signed-off-by:
Xu Kuohai <xukuohai@huawei.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211019032934.1210517-1-xukuohai@huawei.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Toke Høiland-Jørgensen authored
commit 54713c85 upstream. Lorenzo noticed that the code testing for program type compatibility of tail call maps is potentially racy in that two threads could encounter a map with an unset type simultaneously and both return true even though they are inserting incompatible programs. The race window is quite small, but artificially enlarging it by adding a usleep_range() inside the check in bpf_prog_array_compatible() makes it trivial to trigger from userspace with a program that does, essentially: map_fd = bpf_create_map(BPF_MAP_TYPE_PROG_ARRAY, 4, 4, 2, 0); pid = fork(); if (pid) { key = 0; value = xdp_fd; } else { key = 1; value = tc_fd; } err = bpf_map_update_elem(map_fd, &key, &value, 0); While the race window is small, it has potentially serious ramifications in that triggering it would allow a BPF program to tail call to a program of a different type. So let's get rid of it by protecting the update with a spinlock. The commit in the Fixes tag is the last commit that touches the code in question. v2: - Use a spinlock instead of an atomic variable and cmpxchg() (Alexei) v3: - Put lock and the members it protects into an embedded 'owner' struct (Daniel) Fixes: 3324b584 ("ebpf: misc core cleanup") Reported-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211026110019.363464-1-toke@redhat.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Liu Jian authored
commit cd9733f5 upstream. With two Msgs, msgA and msgB and a user doing nonblocking sendmsg calls (or multiple cores) on a single socket 'sk' we could get the following flow. msgA, sk msgB, sk ----------- --------------- tcp_bpf_sendmsg() lock(sk) psock = sk->psock tcp_bpf_sendmsg() lock(sk) ... blocking tcp_bpf_send_verdict if (psock->eval == NONE) psock->eval = sk_psock_msg_verdict .. < handle SK_REDIRECT case > release_sock(sk) < lock dropped so grab here > ret = tcp_bpf_sendmsg_redir psock = sk->psock tcp_bpf_send_verdict lock_sock(sk) ... blocking on B if (psock->eval == NONE) <- boom. psock->eval will have msgA state The problem here is we dropped the lock on msgA and grabbed it with msgB. Now we have old state in psock and importantly psock->eval has not been cleared. So msgB will run whatever action was done on A and the verdict program may never see it. Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by:
Liu Jian <liujian56@huawei.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20211012052019.184398-1-liujian56@huawei.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Björn Töpel authored
commit 27de809a upstream. The bpf_jit_binary_free() function requires a non-NULL argument. When the RISC-V BPF JIT fails to converge in NR_JIT_ITERATIONS steps, jit_data->header will be NULL, which triggers a NULL dereference. Avoid this by checking the argument, prior calling the function. Fixes: ca6cb544 ("riscv, bpf: Factor common RISC-V JIT code") Signed-off-by:
Björn Töpel <bjorn@kernel.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/r/20211028125115.514587-1-bjorn@kernel.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Quanyang Wang authored
commit 04f8ef56 upstream. When enabling CONFIG_CGROUP_BPF, kmemleak can be observed by running the command as below: $mount -t cgroup -o none,name=foo cgroup cgroup/ $umount cgroup/ unreferenced object 0xc3585c40 (size 64): comm "mount", pid 425, jiffies 4294959825 (age 31.990s) hex dump (first 32 bytes): 01 00 00 80 84 8c 28 c0 00 00 00 00 00 00 00 00 ......(......... 00 00 00 00 00 00 00 00 6c 43 a0 c3 00 00 00 00 ........lC...... backtrace: [<e95a2f9e>] cgroup_bpf_inherit+0x44/0x24c [<1f03679c>] cgroup_setup_root+0x174/0x37c [<ed4b0ac5>] cgroup1_get_tree+0x2c0/0x4a0 [<f85b12fd>] vfs_get_tree+0x24/0x108 [<f55aec5c>] path_mount+0x384/0x988 [<e2d5e9cd>] do_mount+0x64/0x9c [<208c9cfe>] sys_mount+0xfc/0x1f4 [<06dd06e0>] ret_fast_syscall+0x0/0x48 [<a8308cb3>] 0xbeb4daa8 This is because that since the commit 2b0d3d3e ("percpu_ref: reduce memory footprint of percpu_ref in fast path") root_cgrp->bpf.refcnt.data is allocated by the function percpu_ref_init in cgroup_bpf_inherit which is called by cgroup_setup_root when mounting, but not freed along with root_cgrp when umounting. Adding cgroup_bpf_offline which calls percpu_ref_kill to cgroup_kill_sb can free root_cgrp->bpf.refcnt.data in umount path. This patch also fixes the commit 4bfc0bb2 ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself"). A cgroup_bpf_offline is needed to do a cleanup that frees the resources which are allocated by cgroup_bpf_inherit in cgroup_setup_root. And inside cgroup_bpf_offline, cgroup_get() is at the beginning and cgroup_put is at the end of cgroup_bpf_release which is called by cgroup_bpf_offline. So cgroup_bpf_offline can keep the balance of cgroup's refcount. Fixes: 2b0d3d3e ("percpu_ref: reduce memory footprint of percpu_ref in fast path") Fixes: 4bfc0bb2 ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself") Signed-off-by:
Quanyang Wang <quanyang.wang@windriver.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Roman Gushchin <guro@fb.com> Acked-by:
John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20211018075623.26884-1-quanyang.wang@windriver.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thelford Williams authored
commit 5afa7898 upstream. Size can be any value and is user controlled resulting in overwriting the 40 byte array wr_buf with an arbitrary length of data from buf. Signed-off-by:
Thelford Williams <tdwilliamsiv@gmail.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christian König authored
commit 0db55f9a upstream. We need to cleanup the fences for ghost objects as well. Signed-off-by:
Christian König <christian.koenig@amd.com> Reported-by:
Erhard F. <erhard_f@mailbox.org> Tested-by:
Erhard F. <erhard_f@mailbox.org> Reviewed-by:
Huang Rui <ray.huang@amd.com> Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214029 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214447 CC: <stable@vger.kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211020173211.2247-1-christian.koenig@amd.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rongwei Wang authored
commit 74c42e1b upstream. Currently collapse_file does not explicitly check PG_writeback, instead, page_has_private and try_to_release_page are used to filter writeback pages. This does not work for xfs with blocksize equal to or larger than pagesize, because in such case xfs has no page->private. This makes collapse_file bail out early for writeback page. Otherwise, xfs end_page_writeback will panic as follows. page:fffffe00201bcc80 refcount:0 mapcount:0 mapping:ffff0003f88c86a8 index:0x0 pfn:0x84ef32 aops:xfs_address_space_operations [xfs] ino:30000b7 dentry name:"libtest.so" flags: 0x57fffe0000008027(locked|referenced|uptodate|active|writeback) raw: 57fffe0000008027 ffff80001b48bc28 ffff80001b48bc28 ffff0003f88c86a8 raw: 0000000000000000 0000000000000000 00000000ffffffff ffff0000c3e9a000 page dumped because: VM_BUG_ON_PAGE(((unsigned int) page_ref_count(page) + 127u <= 127u)) page->mem_cgroup:ffff0000c3e9a000 ------------[ cut here ]------------ kernel BUG at include/linux/mm.h:1212! Internal error: Oops - BUG: 0 [#1] SMP Modules linked in: BUG: Bad page state in process khugepaged pfn:84ef32 xfs(E) page:fffffe00201bcc80 refcount:0 mapcount:0 mapping:0 index:0x0 pfn:0x84ef32 libcrc32c(E) rfkill(E) aes_ce_blk(E) crypto_simd(E) ... CPU: 25 PID: 0 Comm: swapper/25 Kdump: loaded Tainted: ... pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--) Call trace: end_page_writeback+0x1c0/0x214 iomap_finish_page_writeback+0x13c/0x204 iomap_finish_ioend+0xe8/0x19c iomap_writepage_end_bio+0x38/0x50 bio_endio+0x168/0x1ec blk_update_request+0x278/0x3f0 blk_mq_end_request+0x34/0x15c virtblk_request_done+0x38/0x74 [virtio_blk] blk_done_softirq+0xc4/0x110 __do_softirq+0x128/0x38c __irq_exit_rcu+0x118/0x150 irq_exit+0x1c/0x30 __handle_domain_irq+0x8c/0xf0 gic_handle_irq+0x84/0x108 el1_irq+0xcc/0x180 arch_cpu_idle+0x18/0x40 default_idle_call+0x4c/0x1a0 cpuidle_idle_call+0x168/0x1e0 do_idle+0xb4/0x104 cpu_startup_entry+0x30/0x9c secondary_start_kernel+0x104/0x180 Code: d4210000 b0006161 910c8021 94013f4d (d4210000) ---[ end trace 4a88c6a074082f8c ]--- Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt Link: https://lkml.kernel.org/r/20211022023052.33114-1-rongwei.wang@linux.alibaba.com Fixes: 99cb0dbd ("mm,thp: add read-only THP support for (non-shmem) FS") Signed-off-by:
Rongwei Wang <rongwei.wang@linux.alibaba.com> Signed-off-by:
Xu Yu <xuyu@linux.alibaba.com> Suggested-by:
Yang Shi <shy828301@gmail.com> Reviewed-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by:
Yang Shi <shy828301@gmail.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Song Liu <song@kernel.org> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit db6c3c06 upstream. Add the missing endpoint max-packet sanity check to probe() to avoid division by zero in lan78xx_tx_bh() in case a malicious device has broken descriptors (or when doing descriptor fuzz testing). Note that USB core will reject URBs submitted for endpoints with zero wMaxPacketSize but that drivers doing packet-size calculations still need to handle this (cf. commit 2548288b ("USB: Fix: Don't skip endpoint descriptors with maxpacket=0")). Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Cc: stable@vger.kernel.org # 4.3 Cc: Woojung.Huh@microchip.com <Woojung.Huh@microchip.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johannes Berg authored
commit 09b1d5dc upstream. The management registrations locking was broken, the list was locked for each wdev, but cfg80211_mgmt_registrations_update() iterated it without holding all the correct spinlocks, causing list corruption. Rather than trying to fix it with fine-grained locking, just move the lock to the wiphy/rdev (still need the list on each wdev), we already need to hold the wdev lock to change it, so there's no contention on the lock in any case. This trivially fixes the bug since we hold one wdev's lock already, and now will hold the lock that protects all lists. Cc: stable@vger.kernel.org Reported-by:
Jouni Malinen <j@w1.fi> Fixes: 6cd536fe ("cfg80211: change internal management frame registration API") Link: https://lore.kernel.org/r/20211025133111.5cf733eab0f4.I7b0abb0494ab712f74e2efcd24bb31ac33f7eee9@changeid Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johannes Berg authored
commit a2083eeb upstream. The SSID pointer is pointing to RCU protected data, so we need to have it under rcu_read_lock() for the entire use. Fix this. Cc: stable@vger.kernel.org Fixes: 0b8fb823 ("cfg80211: Parsing of Multiple BSSID information in scanning") Link: https://lore.kernel.org/r/20210930131120.6ddfc603aa1d.I2137344c4e2426525b1a8e4ce5fca82f8ecbfe7e@changeid Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sagi Grimberg authored
commit 25e1f67e upstream. We should not access request members after the last send, even to determine if indeed it was the last data payload send. The reason is that a completion could have arrived and trigger a new execution of the request which overridden these members. This was fixed by commit 825619b0 ("nvme-tcp: fix possible use-after-completion"). Commit e371af03 broke that assumption again to address cases where multiple r2t pdus are sent per request. To fix it, we need to record the request data_sent and data_len and after the payload network send we reference these counters to determine weather we should advance the request iterator. Fixes: e371af03 ("nvme-tcp: fix incorrect h2cdata pdu offset accounting") Reported-by:
Keith Busch <kbusch@kernel.org> Cc: stable@vger.kernel.org # 5.10+ Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
Keith Busch <kbusch@kernel.org> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gautham Ananthakrishna authored
commit 6f1b2285 upstream. Encountered a race between ocfs2_test_bg_bit_allocatable() and jbd2_journal_put_journal_head() resulting in the below vmcore. PID: 106879 TASK: ffff880244ba9c00 CPU: 2 COMMAND: "loop3" Call trace: panic oops_end no_context __bad_area_nosemaphore bad_area_nosemaphore __do_page_fault do_page_fault page_fault [exception RIP: ocfs2_block_group_find_clear_bits+316] ocfs2_block_group_find_clear_bits [ocfs2] ocfs2_cluster_group_search [ocfs2] ocfs2_search_chain [ocfs2] ocfs2_claim_suballoc_bits [ocfs2] __ocfs2_claim_clusters [ocfs2] ocfs2_claim_clusters [ocfs2] ocfs2_local_alloc_slide_window [ocfs2] ocfs2_reserve_local_alloc_bits [ocfs2] ocfs2_reserve_clusters_with_limit [ocfs2] ocfs2_reserve_clusters [ocfs2] ocfs2_lock_refcount_allocators [ocfs2] ocfs2_make_clusters_writable [ocfs2] ocfs2_replace_cow [ocfs2] ocfs2_refcount_cow [ocfs2] ocfs2_file_write_iter [ocfs2] lo_rw_aio loop_queue_work kthread_worker_fn kthread ret_from_fork When ocfs2_test_bg_bit_allocatable() called bh2jh(bg_bh), the bg_bh->b_private NULL as jbd2_journal_put_journal_head() raced and released the jounal head from the buffer head. Needed to take bit lock for the bit 'BH_JournalHead' to fix this race. Link: https://lkml.kernel.org/r/1634820718-6043-1-git-send-email-gautham.ananthakrishna@oracle.com Signed-off-by:
Gautham Ananthakrishna <gautham.ananthakrishna@oracle.com> Reviewed-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: <rajesh.sivaramasubramaniom@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Haibo Chen authored
commit 9af372dc upstream. To reset standard tuning circuit completely, after clear ESDHC_MIX_CTRL_EXE_TUNE, also need to clear bit buffer_read_ready, this operation will finally clear the USDHC IP internal logic flag execute_tuning_with_clr_buf, make sure the following normal data transfer will not be impacted by standard tuning logic used before. Find this issue when do quick SD card insert/remove stress test. During standard tuning prodedure, if remove SD card, USDHC standard tuning logic can't clear the internal flag execute_tuning_with_clr_buf. Next time when insert SD card, all data related commands can't get any data related interrupts, include data transfer complete interrupt, data timeout interrupt, data CRC interrupt, data end bit interrupt. Always trigger software timeout issue. Even reset the USDHC through bits in register SYS_CTRL (0x2C, bit28 reset tuning, bit26 reset data, bit 25 reset command, bit 24 reset all) can't recover this. From the user's point of view, USDHC stuck, SD can't be recognized any more. Fixes: d9370424 ("mmc: sdhci-esdhc-imx: reset tuning circuit when power on mmc card") Signed-off-by:
Haibo Chen <haibo.chen@nxp.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1634263236-6111-1-git-send-email-haibo.chen@nxp.com Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Shawn Guo authored
commit 4217d07b upstream. On Thundercomm TurboX CM2290, the eMMC OCR reports vdd = 23 (3.5 ~ 3.6 V), which is being treated as an invalid value by sdhci_set_power_noreg(). And thus eMMC is totally broken on the platform. [ 1.436599] ------------[ cut here ]------------ [ 1.436606] mmc0: Invalid vdd 0x17 [ 1.436640] WARNING: CPU: 2 PID: 69 at drivers/mmc/host/sdhci.c:2048 sdhci_set_power_noreg+0x168/0x2b4 [ 1.436655] Modules linked in: [ 1.436662] CPU: 2 PID: 69 Comm: kworker/u8:1 Tainted: G W 5.15.0-rc1+ #137 [ 1.436669] Hardware name: Thundercomm TurboX CM2290 (DT) [ 1.436674] Workqueue: events_unbound async_run_entry_fn [ 1.436685] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1.436692] pc : sdhci_set_power_noreg+0x168/0x2b4 [ 1.436698] lr : sdhci_set_power_noreg+0x168/0x2b4 [ 1.436703] sp : ffff800010803a60 [ 1.436705] x29: ffff800010803a60 x28: ffff6a9102465f00 x27: ffff6a9101720a70 [ 1.436715] x26: ffff6a91014de1c0 x25: ffff6a91014de010 x24: ffff6a91016af280 [ 1.436724] x23: ffffaf7b1b276640 x22: 0000000000000000 x21: ffff6a9101720000 [ 1.436733] x20: ffff6a9101720370 x19: ffff6a9101720580 x18: 0000000000000020 [ 1.436743] x17: 0000000000000000 x16: 0000000000000004 x15: ffffffffffffffff [ 1.436751] x14: 0000000000000000 x13: 00000000fffffffd x12: ffffaf7b1b84b0bc [ 1.436760] x11: ffffaf7b1b720d10 x10: 000000000000000a x9 : ffff800010803a60 [ 1.436769] x8 : 000000000000000a x7 : 000000000000000f x6 : 00000000fffff159 [ 1.436778] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000ffffffff [ 1.436787] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6a9101718d80 [ 1.436797] Call trace: [ 1.436800] sdhci_set_power_noreg+0x168/0x2b4 [ 1.436805] sdhci_set_ios+0xa0/0x7fc [ 1.436811] mmc_power_up.part.0+0xc4/0x164 [ 1.436818] mmc_start_host+0xa0/0xb0 [ 1.436824] mmc_add_host+0x60/0x90 [ 1.436830] __sdhci_add_host+0x174/0x330 [ 1.436836] sdhci_msm_probe+0x7c0/0x920 [ 1.436842] platform_probe+0x68/0xe0 [ 1.436850] really_probe.part.0+0x9c/0x31c [ 1.436857] __driver_probe_device+0x98/0x144 [ 1.436863] driver_probe_device+0xc8/0x15c [ 1.436869] __device_attach_driver+0xb4/0x120 [ 1.436875] bus_for_each_drv+0x78/0xd0 [ 1.436881] __device_attach_async_helper+0xac/0xd0 [ 1.436888] async_run_entry_fn+0x34/0x110 [ 1.436895] process_one_work+0x1d0/0x354 [ 1.436903] worker_thread+0x13c/0x470 [ 1.436910] kthread+0x150/0x160 [ 1.436915] ret_from_fork+0x10/0x20 [ 1.436923] ---[ end trace fcfac44cb045c3a8 ]--- Fix the issue by mapping MMC_VDD_35_36 (and MMC_VDD_34_35) to SDHCI_POWER_330 as well. Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211004024935.15326-1-shawn.guo@linaro.org Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jaehoon Chung authored
commit 697542bc upstream. Even though there are candiates value if can't find best value, it's returned -EIO. It's not proper behavior. If there is not best value, use a first candiate value to work eMMC. Signed-off-by:
Jaehoon Chung <jh80.chung@samsung.com> Tested-by:
Marek Szyprowski <m.szyprowski@samsung.com> Tested-by:
Christian Hewitt <christianshewitt@gmail.com> Cc: stable@vger.kernel.org Fixes: c537a1c5 ("mmc: dw_mmc: exynos: add variable delay tuning sequence") Link: https://lore.kernel.org/r/20211022082106.1557-1-jh80.chung@samsung.com Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wenbin Mei authored
commit e8a1ff65 upstream. We must enable clock before cqhci init, because crypto needs read information from CQHCI registers, otherwise, it will hang in MediaTek mmc host controller. Signed-off-by:
Wenbin Mei <wenbin.mei@mediatek.com> Fixes: 88bd652b ("mmc: mediatek: command queue support") Cc: stable@vger.kernel.org Acked-by:
Chaotian Jing <chaotian.jing@mediatek.com> Link: https://lore.kernel.org/r/20211028022049.22129-1-wenbin.mei@mediatek.com Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wenbin Mei authored
commit 92b18252 upstream. While mmc0 enter suspend state, we need halt CQE to send legacy cmd(flush cache) and disable cqe, for resume back, we enable CQE and not clear HALT state. In this case MediaTek mmc host controller will keep the value for HALT state after CQE disable/enable flow, so the next CQE transfer after resume will be timeout due to CQE is in HALT state, the log as below: <4>.(4)[318:kworker/4:1H]mmc0: cqhci: timeout for tag 2 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: ============ CQHCI REGISTER DUMP =========== <4>.(4)[318:kworker/4:1H]mmc0: cqhci: Caps: 0x100020b6 | Version: 0x00000510 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: Config: 0x00001103 | Control: 0x00000001 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: Int stat: 0x00000000 | Int enab: 0x00000006 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: Int sig: 0x00000006 | Int Coal: 0x00000000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: TDL base: 0xfd05f000 | TDL up32: 0x00000000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: Doorbell: 0x8000203c | TCN: 0x00000000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: Dev queue: 0x00000000 | Dev Pend: 0x00000000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: Task clr: 0x00000000 | SSC1: 0x00001000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: SSC2: 0x00000001 | DCMD rsp: 0x00000000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: RED mask: 0xfdf9a080 | TERRI: 0x00000000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: Resp idx: 0x00000000 | Resp arg: 0x00000000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: CRNQP: 0x00000000 | CRNQDUN: 0x00000000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: CRNQIS: 0x00000000 | CRNQIE: 0x00000000 This change check HALT state after CQE enable, if CQE is in HALT state, we will clear it. Signed-off-by:
Wenbin Mei <wenbin.mei@mediatek.com> Cc: stable@vger.kernel.org Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Fixes: a4080225 ("mmc: cqhci: support for command queue enabled host") Link: https://lore.kernel.org/r/20211026070812.9359-1-wenbin.mei@mediatek.com Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 8c817192 upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 88095e7b ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver") Cc: stable@vger.kernel.org # 3.0 Signed-off-by:
Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211025115608.5287-1-johan@kernel.org Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-