- Jan 25, 2017
-
-
stephen hemminger authored
This allows for number of channels to be managed in a manner similar to existing hardware drivers. It also removes the restriction of maximum 8 channels and allows as many as the host will allow. Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
For some cases it is useful to be able to change RSS key value. For example, replacing RSS key with a symmetric hash. Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
Report current components used in RSS hash. Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
Report actual number of receive queues to ethtool. Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
Redo how Hyper-V network driver negotiates offload features. Query the host to determine offload settings, and use the result. Also: * disable IPv4 header checksum offload (not used by Linux) * enable TSO only if host supports * enable UDP checksum offload if supported * don't advertise support for checksumming of non-IP protocols * adjust GSO maximum segment size * enable HIGHDMA Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
The ring buffer mapping now handles the wraparound case inside get_next_pkt_raw. Therefore it is not necessary to have an additional special receive staging buffer. See commit 1562edaed8c164ca5199 ("Drivers: hv: ring_buffer: count on wrap around mappings") Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Andrew Lunn says: ==================== External MDIO support for mv88e6xxx The mv88e6390 family of switches has two MDIO busses, one internal to the switch and a second one for external usage. Older generations of switches have a single MDIO bus, which is used both internally and externally. Refactor the existing MDIO driver code to allow for multiple MDIO busses, and implement the second MDIO bus on mv88e6390. This is a rewrite of a patch previously submitted as part of "Batch 3". It has been broken up into 5 smaller patches. A compatible string is now used in the device tree to indicate the external MDIO bus. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
With all the infrastructure in place, implement access to the external MDIO bus on the 6390 family. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
The mv88e6390 has multiple MDIO busses. Generalize the parsing of the device tree to support multiple mdio nodes. The external mdio bus has a compatible strings to indicate it is external. Keep a linked list of busses, placing the external mdio bus at the tail of the list. When within the driver an mdio bus is needed, e.g. for EEE or SERDES, use the head of the list which should be the internal bus. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
Have the MDIO bus driver code allocate a private structure and make the chip a member of it. This will allow us to add further members in the future. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
In preparation for supporting multiple MDIO busses, pass the mii_bus structure to all PHY operations. It will in future then be clear on which MDIO bus the operation should be performed. For reads/write from phylib, the mii_bus is readily available. However some internal code also access the PHY, e.g. for EEE and SERDES. Make this code use the one and only currently available MDIO bus. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
The mv88e6165 family has the internal PHYs mapped directly onto the SMI register space as the switch. So the registers can be read directly. Put a wrapper around this, in preparation for changing the signature in order to support the external MDIO bus of the 6390. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
Table sctp_timer_tbl is missing a TIMEOUT_RECONF string so add this in. Also compare timeout with the size of the array sctp_timer_tbl rather than SCTP_EVENT_TIMEOUT_MAX. Also add a build time check that SCTP_EVENT_TIMEOUT_MAX is correct so we don't ever get this kind of mismatch between the table and SCTP_EVENT_TIMEOUT_MAX in the future. Kudos to Marcelo Ricardo Leitner for spotting the missing string and suggesting the build time sanity check. Fixes CoverityScan CID#1397639 ("Out-of-bounds read") Fixes: 7b9438de ("sctp: add stream reconf timer") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Reviewed-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
David VomLehn says: ==================== net: ethernet: aquantia: Add AQtion 2.5/5 GB NIC driver This series introduces the AQtion NIC driver for the aQuantia AQC107/AQC108 network devices. v1: Initial version v2: o Make necessary drivers/net/ethernet changes to integrate software o Drop intermediate atlantic directory o Remove Makefile things only appropriate to out of tree module building v3: o Move changes to drivers/net/ethernet/{Kconfig,Makefile} to the last patch to ensure clean bisection. o Removed inline attribute aq_hw_write_req() as it was defined in only one .c file. o #included pci.h in aq_common.h to get struct pci definition. o Modified code to unlock based execution flow rather than using a flag. o Made a number of functions that were only used in a single file static. o Cleaned up error and return code handling in various places. o Remove AQ_CFG_IP_ALIGN definition. o Other minor code clean up. v4: o Using do_div for 64 bit division. o Modified NIC statistics code. o Using build_skb instead netdev_alloc_skb for single fragment packets. o Removed extra aq_nic.o from Makefile v5: o Removed extra newline at the end of the files. v6: o Removed unnecessary cast from void*. o Reworked strings array for ethtool statistics. o Added stringset == ETH_SS_STATS checking. o AQ_OBJ_HEADER replaced to aq_obj_header_s struct. o AQ_OBJ_SET/TST/CLR macroses replaced to inline functions. o Driver sources placed in to atlantic directory. o Fixed compilation warnings (Make W=1) o Added firmware version checking. o Code cleaning. v7 o Removed unnecessary cast from memory allocation function (aq_ring.c). v8 o Switched to using kcalloc instead kzalloc. o Now provide bus_info for ethtool o Used div() to avoid __bad_udelay build error. Signed-off-by:
Alexander Loktionov <Alexander.Loktionov@aquantia.com> Signed-off-by:
Dmitrii Tarakanov <Dmitrii.Tarakanov@aquantia.com> Signed-off-by:
Pavel Belous <Pavel.Belous@aquantia.com> Signed-off-by:
David M. VomLehn <vomlehn@texas.net> ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David VomLehn authored
Modify the drivers/net/ethernet/{Makefile,Kconfig} file to make them a part of the network drivers build. Signed-off-by:
Alexander Loktionov <Alexander.Loktionov@aquantia.com> Signed-off-by:
Dmitrii Tarakanov <Dmitrii.Tarakanov@aquantia.com> Signed-off-by:
Pavel Belous <Pavel.Belous@aquantia.com> Signed-off-by:
Dmitry Bezrukov <Dmitry.Bezrukov@aquantia.com> Signed-off-by:
David M. VomLehn <vomlehn@texas.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David VomLehn authored
Add definitions that support receive side scaling. Signed-off-by:
Alexander Loktionov <Alexander.Loktionov@aquantia.com> Signed-off-by:
Dmitrii Tarakanov <Dmitrii.Tarakanov@aquantia.com> Signed-off-by:
Pavel Belous <Pavel.Belous@aquantia.com> Signed-off-by:
Dmitry Bezrukov <Dmitry.Bezrukov@aquantia.com> Signed-off-by:
David M. VomLehn <vomlehn@texas.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David VomLehn authored
Add the driver interfaces required for support by the ethtool utility. Signed-off-by:
Alexander Loktionov <Alexander.Loktionov@aquantia.com> Signed-off-by:
Dmitrii Tarakanov <Dmitrii.Tarakanov@aquantia.com> Signed-off-by:
Pavel Belous <Pavel.Belous@aquantia.com> Signed-off-by:
Dmitry Bezrukov <Dmitry.Bezrukov@aquantia.com> Signed-off-by:
David M. VomLehn <vomlehn@texas.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David VomLehn authored
Add functions to interface with the hardware and some utility functions. Signed-off-by:
Alexander Loktionov <Alexander.Loktionov@aquantia.com> Signed-off-by:
Dmitrii Tarakanov <Dmitrii.Tarakanov@aquantia.com> Signed-off-by:
Pavel Belous <Pavel.Belous@aquantia.com> Signed-off-by:
Dmitry Bezrukov <Dmitry.Bezrukov@aquantia.com> Signed-off-by:
David M. VomLehn <vomlehn@texas.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David VomLehn authored
Add common functions for Atlantic hardware abstraction layer. Signed-off-by:
Alexander Loktionov <Alexander.Loktionov@aquantia.com> Signed-off-by:
Dmitrii Tarakanov <Dmitrii.Tarakanov@aquantia.com> Signed-off-by:
Pavel Belous <Pavel.Belous@aquantia.com> Signed-off-by:
Dmitry Bezrukov <Dmitry.Bezrukov@aquantia.com> Signed-off-by:
David M. VomLehn <vomlehn@texas.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David VomLehn authored
Add functions that handle the PCI bus interface. Signed-off-by:
Alexander Loktionov <Alexander.Loktionov@aquantia.com> Signed-off-by:
Dmitrii Tarakanov <Dmitrii.Tarakanov@aquantia.com> Signed-off-by:
Pavel Belous <Pavel.Belous@aquantia.com> Signed-off-by:
Dmitry Bezrukov <Dmitry.Bezrukov@aquantia.com> Signed-off-by:
David M. VomLehn <vomlehn@texas.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David VomLehn authored
Add functions to manululate the vector of receive and transmit rings. Signed-off-by:
Alexander Loktionov <Alexander.Loktionov@aquantia.com> Signed-off-by:
Dmitrii Tarakanov <Dmitrii.Tarakanov@aquantia.com> Signed-off-by:
Pavel.Belous <Pavel.Belous@aquantia.com> Signed-off-by:
Dmitry Bezrukov <Dmitry.Bezrukov@aquantia.com> Signed-off-by:
David M. VomLehn <vomlehn@texas.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David VomLehn authored
Add Atlantic A0 and B0 specific functions. Signed-off-by:
Alexander Loktionov <Alexander.Loktionov@aquantia.com> Signed-off-by:
Dmitrii Tarakanov <Dmitrii.Tarakanov@aquantia.com> Signed-off-by:
Pavel Belous <Pavel.Belous@aquantia.com> Signed-off-by:
Dmitry Bezrukov <Dmitry.Bezrukov@aquantia.com> Signed-off-by:
David M. VomLehn <vomlehn@texas.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David VomLehn authored
Add support for code specific to the Atlantic NIC. Signed-off-by:
Alexander Loktionov <Alexander.Loktionov@aquantia.com> Signed-off-by:
Dmitrii Tarakanov <Dmitrii.Tarakanov@aquantia.com> Signed-off-by:
Pavel Belous <Pavel.Belous@aquantia.com> Signed-off-by:
Dmitry Bezrukov <Dmitry.Bezrukov@aquantia.com> Signed-off-by:
David M. VomLehn <vomlehn@texas.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David VomLehn authored
Add definitions of functions that interface directly with the hardware. Signed-off-by:
Alexander Loktionov <Alexander.Loktionov@aquantia.com> Signed-off-by:
Dmitrii Tarakanov <Dmitrii.Tarakanov@aquantia.com> Signed-off-by:
Pavel.Belous <Pavel.Belous@aquantia.com> Signed-off-by:
Dmitry Bezrukov <Dmitry.Bezrukov@aquantia.com> Signed-off-by:
David M. VomLehn <vomlehn@texas.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David VomLehn authored
Add code to support the transmit and receive ring buffers. Signed-off-by:
Alexander Loktionov <Alexander.Loktionov@aquantia.com> Signed-off-by:
Dmitrii Tarakanov <Dmitrii.Tarakanov@aquantia.com> Signed-off-by:
Pavel Belous <Pavel.Belous@aquantia.com> Signed-off-by:
Dmitry Bezrukov <Dmitry.Bezrukov@aquantia.com> Signed-off-by:
David M. VomLehn <vomlehn@texas.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David VomLehn authored
Add files containing the functions and definitions used in common in different functional areas. Signed-off-by:
Alexander Loktionov <Alexander.Loktionov@aquantia.com> Signed-off-by:
Dmitrii Tarakanov <Dmitrii.Tarakanov@aquantia.com> Signed-off-by:
Pavel Belous <Pavel.Belous@aquantia.com> Signed-off-by:
Dmitry Bezrukov <Dmitry.Bezrukov@aquantia.com> Signed-off-by:
David M. VomLehn <vomlehn@texas.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David VomLehn authored
Patches to create the make and configuration files. Signed-off-by:
Alexander Loktionov <Alexander.Loktionov@aquantia.com> Signed-off-by:
Dmitrii Tarakanov <Dmitrii.Tarakanov@aquantia.com> Signed-off-by:
Pavel Belous <Pavel.Belous@aquantia.com> Signed-off-by:
Dmitry Bezrukov <Dmitry.Bezrukov@aquantia.com> Signed-off-by:
David M. VomLehn <vomlehn@texas.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
We may be able to see invalid Broadcom tags when the hardware and drivers are misconfigured, or just while exercising the error path. Instead of flooding the console with messages, flat out drop the packet. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stephen Boyd authored
After commit 51b7b1c3 (KSZ8851-SNL: Add ethtool support for EEPROM via eeprom_93cx6, 2011-11-21) this structure member is unused. Delete it. Signed-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Daniel Borkmann says: ==================== Misc BPF improvements This series adds various misc improvements to BPF, f.e. allowing skb_load_bytes() helper to be used with filter/reuseport programs to facilitate programming, test cases for program tag, etc. For details, please see individual patches. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
William reported couple of issues in relation to direct packet access. Typical scheme is to check for data + [off] <= data_end, where [off] can be either immediate or coming from a tracked register that contains an immediate, depending on the branch, we can then access the data. However, in case of calculating [off] for either the mentioned test itself or for access after the test in a more "complex" way, then the verifier will stop tracking the CONST_IMM marked register and will mark it as UNKNOWN_VALUE one. Adding that UNKNOWN_VALUE typed register to a pkt() marked register, the verifier then bails out in check_packet_ptr_add() as it finds the registers imm value below 48. In the first below example, that is due to evaluate_reg_imm_alu() not handling right shifts and thus marking the register as UNKNOWN_VALUE via helper __mark_reg_unknown_value() that resets imm to 0. In the second case the same happens at the time when r4 is set to r4 &= r5, where it transitions to UNKNOWN_VALUE from evaluate_reg_imm_alu(). Later on r4 we shift right by 3 inside evaluate_reg_alu(), where the register's imm turns into 3. That is, for registers with type UNKNOWN_VALUE, imm of 0 means that we don't know what value the register has, and for imm > 0 it means that the value has [imm] upper zero bits. F.e. when shifting an UNKNOWN_VALUE register by 3 to the right, no matter what value it had, we know that the 3 upper most bits must be zero now. This is to make sure that ALU operations with unknown registers don't overflow. Meaning, once we know that we have more than 48 upper zero bits, or, in other words cannot go beyond 0xffff offset with ALU ops, such an addition will track the target register as a new pkt() register with a new id, but 0 offset and 0 range, so for that a new data/data_end test will be required. Is the source register a CONST_IMM one that is to be added to the pkt() register, or the source instruction is an add instruction with immediate value, then it will get added if it stays within max 0xffff bounds. >From there, pkt() type, can be accessed should reg->off + imm be within the access range of pkt(). [...] from 28 to 30: R0=imm1,min_value=1,max_value=1 R1=pkt(id=0,off=0,r=22) R2=pkt_end R3=imm144,min_value=144,max_value=144 R4=imm0,min_value=0,max_value=0 R5=inv48,min_value=2054,max_value=2054 R10=fp 30: (bf) r5 = r3 31: (07) r5 += 23 32: (77) r5 >>= 3 33: (bf) r6 = r1 34: (0f) r6 += r5 cannot add integer value with 0 upper zero bits to ptr_to_packet [...] from 52 to 80: R0=imm1,min_value=1,max_value=1 R1=pkt(id=0,off=0,r=34) R2=pkt_end R3=inv R4=imm272 R5=inv56,min_value=17,max_value=17 R6=pkt(id=0,off=26,r=34) R10=fp 80: (07) r4 += 71 81: (18) r5 = 0xfffffff8 83: (5f) r4 &= r5 84: (77) r4 >>= 3 85: (0f) r1 += r4 cannot add integer value with 3 upper zero bits to ptr_to_packet Thus to get above use-cases working, evaluate_reg_imm_alu() has been extended for further ALU ops. This is fine, because we only operate strictly within realm of CONST_IMM types, so here we don't care about overflows as they will happen in the simulated but also real execution and interaction with pkt() in check_packet_ptr_add() will check actual imm value once added to pkt(), but it's irrelevant before. With regards to 06c1c049 ("bpf: allow helpers access to variable memory") that works on UNKNOWN_VALUE registers, the verifier becomes now a bit smarter as it can better resolve ALU ops, so we need to adapt two test cases there, as min/max bound tracking only becomes necessary when registers were spilled to stack. So while mask was set before to track upper bound for UNKNOWN_VALUE case, it's now resolved directly as CONST_IMM, and such contructs are only necessary when f.e. registers are spilled. For commit 6b173873 ("bpf: recognize 64bit immediate loads as consts") that initially enabled dw load tracking only for nfp jit/ analyzer, I did couple of tests on large, complex programs and we don't increase complexity badly (my tests were in ~3% range on avg). I've added a couple of tests similar to affected code above, and it works fine with verifier now. Reported-by:
William Tu <u9012063@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Cc: Gianluca Borello <g.borello@gmail.com> Cc: William Tu <u9012063@gmail.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Add the test case used to compare the results from fdinfo with af_alg's output on the tag. Tests are from min to max sized programs, with and without maps included. # ./test_tag test_tag: OK (40945 tests) Tested on x86_64 and s390x. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
When programs need to calculate the csum from scratch for small UDP packets and use bpf_l4_csum_replace() to feed the result from helpers like bpf_csum_diff(), then we need a flag besides BPF_F_MARK_MANGLED_0 that would ignore the case of current csum being 0, and which would still allow for the helper to set the csum and transform when needed to CSUM_MANGLED_0. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
BPF_PROG_TYPE_SOCKET_FILTER are used in various facilities such as for SO_REUSEPORT and packet fanout demuxing, packet filtering, kcm, etc, and yet the only facility they can use is BPF_LD with {BPF_ABS, BPF_IND} for single byte/half/word access. Direct packet access is only restricted to tc programs right now, but we can still facilitate usage by allowing skb_load_bytes() helper added back then in 05c74e5e ("bpf: add bpf_skb_load_bytes helper") that calls skb_header_pointer() similarly to bpf_load_pointer(), but for stack buffers with larger access size. Name the previous sk_filter_func_proto() as bpf_base_func_proto() since this is used everywhere else as well, similarly for the ctx converter, that is, bpf_convert_ctx_access(). Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
The __is_valid_access() test for cb[] from 62c7989b ("bpf: allow b/h/w/dw access for bpf's cb in ctx") was done unnecessarily complex, we can just simplify it the same way as recent fix from 2d071c64 ("bpf, trace: make ctx access checks more robust") did. Overflow can never happen as size is 1/2/4/8 depending on access. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
One line was apparently pasted incorrectly during a new feature patch: drivers/net/phy/marvell.c:2090:15: error: initialized field overwritten [-Werror=override-init] .features = PHY_GBIT_FEATURES, I'm removing the extraneous line here to avoid the W=1 warning and restore the previous flags value, and I'm slightly reordering the lines for consistency to make it less likely to happen again in the future. The ordering in the array is still not the same as in the structure definition, instead I picked the order that is most common in this file and that seems to make more sense here. Fixes: 0b04680f ("phy: marvell: Add support for temperature sensor") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Phil Sutter authored
The idea for this was born when testing VF support in iproute2 which was impeded by hardware requirements. In fact, not every VF-capable hardware driver implements all netdev ops, so testing the interface is still hard to do even with a well-sorted hardware shelf. To overcome this and allow for testing the user-kernel interface, this patch allows to turn dummy into a PF with a configurable amount of VFs. Since my patch series 'bus-agnostic-num-vf' has been accepted, implementing the required interfaces is pretty straightforward: Iff 'num_vfs' module parameter was given a value >0, a dummy bus type is being registered which implements the 'num_vf()' callback. Additionally, a dummy parent device common to all dummy devices is registered which sits on the above dummy bus. Joint work with Sabrina Dubroca. Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
Phil Sutter <phil@nwl.cc> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by:
Philippe Reynes <tremyfr@gmail.com> Acked-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jiri Pirko says: ==================== Add support for offloading packet-sampling Yotam says: The first patch introduces the psample module, a netlink channel dedicated to packet sampling implemented using generic netlink. This module provides a generic way for kernel modules to sample packets, while not being tied to any specific subsystem like NFLOG. The second patch adds the sample tc action, which uses psample to randomly sample packets that match a classifier. The user can configure the psample group number, the sampling rate and the packet's truncation (to save kernel-user traffic). The last two patches add the support for offloading the matchall-sample tc command in the mlxsw driver, for ingress qdiscs. An example for psample usage can be found in the libpsample project at: https://github.com/Mellanox/libpsample v1->v2: - Reword first patch's commit message - Fix typo in comment in second patch - Change order of tc_sample uapi enum to match convention - Rename act_sample action callback tcf_sample -> tcf_sample_act ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yotam Gigi authored
Using the MPSC register, add the functions that configure port-based packet sampling in hardware and the necessary datatypes in the mlxsw_sp_port struct. In addition, add the necessary trap for sampled packets and integrate with matchall offloading to allow offloading of the sample tc action. The current offload support is for the tc command: tc filter add dev <DEV> parent ffff: \ matchall skip_sw \ action sample rate <RATE> group <GROUP> [trunc <SIZE>] Where only ingress qdiscs are supported, and only a combination of matchall classifier and sample action will lead to activating hardware packet sampling. Signed-off-by:
Yotam Gigi <yotamg@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-