Since commit 9ed5af26

 ("SUNRPC: Clean up the handling of page
padding in rpc_prepare_reply_pages()") [Dec 2020] the NFS client
passes payload data to the transport with the padding in xdr->pages
instead of in the send buffer's tail kvec. There's no need for the
extra logic to advance the base of the tail kvec because the upper
layer no longer places XDR padding there.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Make it easier to spot messages of an unusual size.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

The NetApp Linux team discovered that with NFS/RDMA servers that do
not support RFC 8797, the Linux client is forming NFSv4.x WRITE
requests incorrectly.

In this case, the Linux NFS client disables implicit chunk round-up
for odd-length Read and Write chunks. The goal was to support old
servers that needed that padding to be sent explicitly by clients.

In that case the Linux NFS included the tail kvec in the Read chunk,
since the tail contains any needed padding. That meant a separate
memory registration is needed for the tail kvec, adding to the cost
of forming such requests. To avoid that cost for a mere 3 bytes of
zeroes that are always ignored by receivers, we try to use implicit
roundup when possible.

For NFSv4.x, the tail kvec also sometimes contains a trailing
GETATTR operation. The Linux NFS client unintentionally includes
that GETATTR operation in the Read chunk as well as inline.

The fix is simply to /never/ include the tail kvec when forming a
data payload Read chunk. The padding is thus now always present.

Note that since commit 9ed5af26

 ("SUNRPC: Clean up the handling
of page padding in rpc_prepare_reply_pages()") [Dec 2020] the NFS
client passes payload data to the transport with the padding in
xdr->pages instead of in the send buffer's tail kvec. So now the
Linux NFS client appends XDR padding to all odd-sized Read chunks.
This shouldn't be a problem because:

 - RFC 8166-compliant servers are supposed to work with or without
   that XDR padding in Read chunks.

 - Since the padding is now in the same memory region as the data
   payload, a separate memory registration is not needed. In
   addition, the link layer extends data in RDMA Read responses to
   4-byte boundaries anyway. Thus there is now no savings when the
   padding is not included.

Because older kernels include the payload's XDR padding in the
tail kvec, a fix there will be more complicated. Thus backporting
this patch is not recommended.

Reported by: Olga Kornievskaia <Olga.Kornievskaia@netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

During the final stages of publication of RFC 8167, reviewers
requested that we use the term "reverse direction" rather than
"backwards direction". Update comments to reflect this preference.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Clean up so that offset_in_page() is invoked less often in the
most common case, which is mapping xdr->pages.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Clean up.

Remove a conditional branch from the SGL set-up loop in frwr_map():
Instead of using either sg_set_page() or sg_set_buf(), initialize
the mr_page field properly when rpcrdma_convert_kvec() converts the
kvec to an SGL entry. frwr_map() can then invoke sg_set_page()
unconditionally.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Support for FMR was removed by commit ba69cd12 ("xprtrdma:
Remove support for FMR memory registration") [Dec 2018]. That means
the buffer-splitting behavior of rpcrdma_convert_kvec(), added by
commit 821c791a

 ("xprtrdma: Segment head and tail XDR buffers
on page boundaries") [Mar 2016], is no longer necessary. FRWR
memory registration handles this case with aplomb.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Add nfs_pageio_complete_read() and call this from both nfs_readpage()
and nfs_readpages(), since the submission and accounting is the same
for both functions.

Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Refactor slightly so nfs_readpage_async() calls into
readpage_async_filler().

Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Both nfs_readpage() and nfs_readpages() use similar code.
This patch should be no functional change, and refactors
nfs_readpage_async() to use nfs_readdesc to enable future
merging of nfs_readpage_async() and nfs_readpage_async_filler().

Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

There is a small inconsistency with nfs_readpage() vs nfs_readpages() with
regards to NFSIOS_READPAGES.  In readpage we unconditionally increment
NFSIOS_READPAGES at the top, which means even if the read fails.  In
readpages, we increment NFSIOS_READPAGES at the bottom based on how
many pages were successfully read.  Change readpage to be consistent with
readpages and so NFSIOS_READPAGES only reflects successful, non-fscache
reads.

Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

In prep for the new fscache netfs API, refactor nfs_readpage()
and nfs_readpages() for future patches.  No functional change.

Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly add multiple break/goto/return/fallthrough
statements instead of just letting the code fall through to the next
case.

Link: https://github.com/KSPP/linux/issues/115


Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break statements instead of
letting the code fall through to the next case.

Link: https://github.com/KSPP/linux/issues/115


Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

'nfs42.h' is already included above and can be removed here.

Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Few trivial and rudimentary spell corrections.

Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

This comment was introduced by commit 6ea44adc
("SUNRPC: ensure correct error is reported by xs_tcp_setup_socket()").

I believe EIO was a typo at the time: it should have been EAGAIN.

Subsequently, commit 0445f92c ("SUNRPC: Fix disconnection races")
changed that to ENOTCONN.

Rather than trying to keep the comment here in sync with the code in
xprt_force_disconnect(), make the point in a non-specific way.

Fixes: 6ea44adc

 ("SUNRPC: ensure correct error is reported by xs_tcp_setup_socket()")
Signed-off-by: Calum Mackay <calum.mackay@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Pull EFI fix from Borislav Petkov:
 "A single fix from Lukas: handle boolean device properties imported
  from Apple firmware correctly"

* tag 'efi-urgent-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/apple-properties: Reinstate support for boolean properties

Pull x86 fix from Borislav Petkov:
 "A single fix for objtool to generate proper unwind info for newer
  toolchains which do not generate section symbols anymore. And a
  cleanup ontop.

  This was originally going to go during the next merge window but
  people can already trigger a build error with binutils-2.36 which
  doesn't emit section symbols - something which objtool relies on - so
  let's expedite it"

* tag 'x86_entry_for_v5.11_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/entry: Remove put_ret_addr_in_rdi THUNK macro argument
  x86/entry: Emit a symbol for register restoring thunk

Pull timer fix from Thomas Gleixner:
 "A fix for handling advertised, but non-existent 146818 RTCs correctly.

  With the recent UIP handling changes the time readout of non-existent
  RTCs hangs forever as the read returns always 0xFF which means the UIP
  bit is set.

  Sanity check the RTC before registering by checking the RTC_VALID
  register for correctness"

* tag 'timers-urgent-2021-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rtc: mc146818: Detect and handle broken RTCs

Pull single stepping fix from Thomas Gleixner:
 "A single fix for the single step reporting regression caused by
  getting the condition wrong when moving SYSCALL_EMU away from TIF
  flags"

[ There's apparently another problem too, fix pending ]

* tag 'core-urgent-2021-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  entry: Unbreak single step reporting behaviour

Pull powerpc fix from Michael Ellerman:
 "One fix for a bug in our soft interrupt masking, which could lead to
  interrupt replaying recursing, causing spurious interrupts.

  Thanks to Nicholas Piggin"

* tag 'powerpc-5.11-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: prevent recursive replay_soft_interrupts causing superfluous interrupt

Pull i2c fix from Wolfram Sang:
 "Just one I2C driver update this time"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: mediatek: Move suspend and resume handling to NOIRQ phase

Pull LED fixes from Pavel Machek:
 "This pull is due to 'leds: trigger: fix potential deadlock with
  libata' -- people find the warn annoying.

  It also contains new driver and two trivial fixes"

* 'for-rc-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
  leds: rt8515: Add Richtek RT8515 LED driver
  dt-bindings: leds: Add DT binding for Richtek RT8515
  leds: trigger: fix potential deadlock with libata
  leds: leds-ariel: convert comma to semicolon
  leds: leds-lm3533: convert comma to semicolon

Pull NFS client fixes from Trond Myklebust:

 - SUNRPC: Handle 0 length opaque XDR object data properly

 - Fix a layout segment leak in pnfs_layout_process()

 - pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn

 - pNFS/NFSv4: Improve rejection of out-of-order layouts

 - pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process()

* tag 'nfs-for-5.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  SUNRPC: Handle 0 length opaque XDR object data properly
  SUNRPC: Move simple_get_bytes and simple_get_netobj into private header
  pNFS/NFSv4: Improve rejection of out-of-order layouts
  pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn
  pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process()
  pNFS/NFSv4: Fix a layout segment leak in pnfs_layout_process()

This adds a driver for the Richtek RT8515 dual channel
torch/flash white LED driver.

This LED driver is found in some mobile phones from
Samsung such as the GT-S7710 and GT-I8190.

A V4L interface is added.

We do not have a proper datasheet for the RT8515 but
it turns out that RT9387A has a public datasheet and
is essentially the same chip. We designed the driver
in accordance with this datasheet. The day someone
needs to drive a RT9387A this driver can probably
easily be augmented to handle that chip too.

Sakari Ailus, Pavel Machek and Andy Shevchenko helped
significantly in getting this driver right.

Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: newbytee@protonmail.com
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: linux-media@vger.kernel.org
Cc: phone-devel@vger.kernel.org
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Add a YAML devicetree binding for the Richtek RT8515
dual channel flash/torch LED driver.

Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: newbytee@protonmail.com
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: phone-devel@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

We have the following potential deadlock condition:

 ========================================================
 WARNING: possible irq lock inversion dependency detected
 5.10.0-rc2+ #25 Not tainted
 --------------------------------------------------------
 swapper/3/0 just changed the state of lock:
 ffff8880063bd618 (&host->lock){-...}-{2:2}, at: ata_bmdma_interrupt+0x27/0x200
 but this lock took another, HARDIRQ-READ-unsafe lock in the past:
  (&trig->leddev_list_lock){.+.?}-{2:2}

 and interrupts could create inverse lock ordering between them.

 other info that might help us debug this:
  Possible interrupt unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(&trig->leddev_list_lock);
                                local_irq_disable();
                                lock(&host->lock);
                                lock(&trig->leddev_list_lock);
   <Interrupt>
     lock(&host->lock);

  *** DEADLOCK ***

 no locks held by swapper/3/0.

 the shortest dependencies between 2nd lock and 1st lock:
  -> (&trig->leddev_list_lock){.+.?}-{2:2} ops: 46 {
     HARDIRQ-ON-R at:
                       lock_acquire+0x15f/0x420
                       _raw_read_lock+0x42/0x90
                       led_trigger_event+0x2b/0x70
                       rfkill_global_led_trigger_worker+0x94/0xb0
                       process_one_work+0x240/0x560
                       worker_thread+0x58/0x3d0
                       kthread+0x151/0x170
                       ret_from_fork+0x1f/0x30
     IN-SOFTIRQ-R at:
                       lock_acquire+0x15f/0x420
                       _raw_read_lock+0x42/0x90
                       led_trigger_event+0x2b/0x70
                       kbd_bh+0x9e/0xc0
                       tasklet_action_common.constprop.0+0xe9/0x100
                       tasklet_action+0x22/0x30
                       __do_softirq+0xcc/0x46d
                       run_ksoftirqd+0x3f/0x70
                       smpboot_thread_fn+0x116/0x1f0
                       kthread+0x151/0x170
                       ret_from_fork+0x1f/0x30
     SOFTIRQ-ON-R at:
                       lock_acquire+0x15f/0x420
                       _raw_read_lock+0x42/0x90
                       led_trigger_event+0x2b/0x70
                       rfkill_global_led_trigger_worker+0x94/0xb0
                       process_one_work+0x240/0x560
                       worker_thread+0x58/0x3d0
                       kthread+0x151/0x170
                       ret_from_fork+0x1f/0x30
     INITIAL READ USE at:
                           lock_acquire+0x15f/0x420
                           _raw_read_lock+0x42/0x90
                           led_trigger_event+0x2b/0x70
                           rfkill_global_led_trigger_worker+0x94/0xb0
                           process_one_work+0x240/0x560
                           worker_thread+0x58/0x3d0
                           kthread+0x151/0x170
                           ret_from_fork+0x1f/0x30
   }
   ... key      at: [<ffffffff83da4c00>] __key.0+0x0/0x10
   ... acquired at:
    _raw_read_lock+0x42/0x90
    led_trigger_blink_oneshot+0x3b/0x90
    ledtrig_disk_activity+0x3c/0xa0
    ata_qc_complete+0x26/0x450
    ata_do_link_abort+0xa3/0xe0
    ata_port_freeze+0x2e/0x40
    ata_hsm_qc_complete+0x94/0xa0
    ata_sff_hsm_move+0x177/0x7a0
    ata_sff_pio_task+0xc7/0x1b0
    process_one_work+0x240/0x560
    worker_thread+0x58/0x3d0
    kthread+0x151/0x170
    ret_from_fork+0x1f/0x30

 -> (&host->lock){-...}-{2:2} ops: 69 {
    IN-HARDIRQ-W at:
                     lock_acquire+0x15f/0x420
                     _raw_spin_lock_irqsave+0x52/0xa0
                     ata_bmdma_interrupt+0x27/0x200
                     __handle_irq_event_percpu+0xd5/0x2b0
                     handle_irq_event+0x57/0xb0
                     handle_edge_irq+0x8c/0x230
                     asm_call_irq_on_stack+0xf/0x20
                     common_interrupt+0x100/0x1c0
                     asm_common_interrupt+0x1e/0x40
                     native_safe_halt+0xe/0x10
                     arch_cpu_idle+0x15/0x20
                     default_idle_call+0x59/0x1c0
                     do_idle+0x22c/0x2c0
                     cpu_startup_entry+0x20/0x30
                     start_secondary+0x11d/0x150
                     secondary_startup_64_no_verify+0xa6/0xab
    INITIAL USE at:
                    lock_acquire+0x15f/0x420
                    _raw_spin_lock_irqsave+0x52/0xa0
                    ata_dev_init+0x54/0xe0
                    ata_link_init+0x8b/0xd0
                    ata_port_alloc+0x1f1/0x210
                    ata_host_alloc+0xf1/0x130
                    ata_host_alloc_pinfo+0x14/0xb0
                    ata_pci_sff_prepare_host+0x41/0xa0
                    ata_pci_bmdma_prepare_host+0x14/0x30
                    piix_init_one+0x21f/0x600
                    local_pci_probe+0x48/0x80
                    pci_device_probe+0x105/0x1c0
                    really_probe+0x221/0x490
                    driver_probe_device+0xe9/0x160
                    device_driver_attach+0xb2/0xc0
                    __driver_attach+0x91/0x150
                    bus_for_each_dev+0x81/0xc0
                    driver_attach+0x1e/0x20
                    bus_add_driver+0x138/0x1f0
                    driver_register+0x91/0xf0
                    __pci_register_driver+0x73/0x80
                    piix_init+0x1e/0x2e
                    do_one_initcall+0x5f/0x2d0
                    kernel_init_freeable+0x26f/0x2cf
                    kernel_init+0xe/0x113
                    ret_from_fork+0x1f/0x30
  }
  ... key      at: [<ffffffff83d9fdc0>] __key.6+0x0/0x10
  ... acquired at:
    __lock_acquire+0x9da/0x2370
    lock_acquire+0x15f/0x420
    _raw_spin_lock_irqsave+0x52/0xa0
    ata_bmdma_interrupt+0x27/0x200
    __handle_irq_event_percpu+0xd5/0x2b0
    handle_irq_event+0x57/0xb0
    handle_edge_irq+0x8c/0x230
    asm_call_irq_on_stack+0xf/0x20
    common_interrupt+0x100/0x1c0
    asm_common_interrupt+0x1e/0x40
    native_safe_halt+0xe/0x10
    arch_cpu_idle+0x15/0x20
    default_idle_call+0x59/0x1c0
    do_idle+0x22c/0x2c0
    cpu_startup_entry+0x20/0x30
    start_secondary+0x11d/0x150
    secondary_startup_64_no_verify+0xa6/0xab

This lockdep splat is reported after:
commit e9181886 ("locking: More accurate annotations for read_lock()")

To clarify:
 - read-locks are recursive only in interrupt context (when
   in_interrupt() returns true)
 - after acquiring host->lock in CPU1, another cpu (i.e. CPU2) may call
   write_lock(&trig->leddev_list_lock) that would be blocked by CPU0
   that holds trig->leddev_list_lock in read-mode
 - when CPU1 (ata_ac_complete()) tries to read-lock
   trig->leddev_list_lock, it would be blocked by the write-lock waiter
   on CPU2 (because we are not in interrupt context, so the read-lock is
   not recursive)
 - at this point if an interrupt happens on CPU0 and
   ata_bmdma_interrupt() is executed it will try to acquire host->lock,
   that is held by CPU1, that is currently blocked by CPU2, so:

   * CPU0 blocked by CPU1
   * CPU1 blocked by CPU2
   * CPU2 blocked by CPU0

     *** DEADLOCK ***

The deadlock scenario is better represented by the following schema
(thanks to Boqun Feng <boqun.feng@gmail.com> for the schema and the
detailed explanation of the deadlock condition):

 CPU 0:                          CPU 1:                        CPU 2:
 -----                           -----                         -----
 led_trigger_event():
   read_lock(&trig->leddev_list_lock);
 				<workqueue>
 				ata_hsm_qc_complete():
 				  spin_lock_irqsave(&host->lock);
 								write_lock(&trig->leddev_list_lock);
 				  ata_port_freeze():
 				    ata_do_link_abort():
 				      ata_qc_complete():
 					ledtrig_disk_activity():
 					  led_trigger_blink_oneshot():
 					    read_lock(&trig->leddev_list_lock);
 					    // ^ not in in_interrupt() context, so could get blocked by CPU 2
 <interrupt>
   ata_bmdma_interrupt():
     spin_lock_irqsave(&host->lock);

Fix by using read_lock_irqsave/irqrestore() in led_trigger_event(), so
that no interrupt can happen in between, preventing the deadlock
condition.

Apply the same change to led_trigger_blink_setup() as well, since the
same deadlock scenario can also happen in power_supply_update_bat_leds()
-> led_trigger_blink() -> led_trigger_blink_setup() (workqueue context),
and potentially prevent other similar usages.

Link: https://lore.kernel.org/lkml/20201101092614.GB3989@xps-13-7390/
Fixes: eb25cb99

 ("leds: convert IDE trigger to common disk trigger")
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Replace a comma between expression statements by a semicolon.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Reviewed-by: Alexander Dahl <ada@thorsis.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Replace a comma between expression statements by a semicolon.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Pull cifs fixes from Steve French:
 "Four cifs patches found in additional testing of the conversion to the
  new mount API: three small option processing ones, and one fixing domain
  based DFS referrals"

* tag '5.11-rc5-smb3' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix dfs domain referrals
  cifs: returning mount parm processing errors correctly
  cifs: fix mounts to subdirectories of target
  cifs: ignore auto and noauto options if given

Pull SCSI fixes from James Bottomley:
 "Two minor fixes in drivers. Both changing strings (one in a comment,
  one in a module help text) with no code impact"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla2xxx: Fix description for parameter ql2xenforce_iocb_limit
  scsi: target: iscsi: Fix typo in comment

Pull OpenRISC fix from Stafford Horne:
 "Fix config dependencies for Litex SOC driver causing issues on um"

* tag 'for-linus' of git://github.com/openrisc/linux:
  soc: litex: Properly depend on HAS_IOMEM

Pull devicetree fixes from Rob Herring:

 - Cleanups on properties with standard unit suffixes

 - Fix overwriting dma_range_map if there's no 'dma-ranges' property

 - Fix a bug when creating a /chosen node from ARM ATAGs

 - Add missing properties for TI j721e USB binding

 - Several doc reference updates due to DT schema conversions

* tag 'devicetree-fixes-for-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: Cleanup standard unit properties
  of/device: Update dma_range_map only when dev has valid dma-ranges
  ARM: zImage: atags_to_fdt: Fix node names on added root nodes
  dt-bindings: usb: j721e: add ranges and dma-coherent props
  dt-bindings:iio:adc: update adc.yaml reference
  dt-bindings: memory: mediatek: update mediatek,smi-larb.yaml references
  dt-bindings: display: mediatek: update mediatek,dpi.yaml reference
  ASoC: audio-graph-card: update audio-graph-card.yaml reference

Pull s390 fixes from Vasily Gorbik:

 - Fix max number of VCPUs reported via ultravisor information sysfs
   interface.

 - Fix memory leaks during vfio-ap resources clean up on KVM pointer
   invalidation notification.

 - Fix potential specification exception by avoiding unnecessary
   interrupts disable after queue reset in vfio-ap.

* tag 's390-5.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: uv: Fix sysfs max number of VCPUs reporting
  s390/vfio-ap: No need to disable IRQ after queue reset
  s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated

Pull RISC-V fix from Palmer Dabbelt:
 "A fix to avoid initializing max_mapnr to be too large, which may
  manifest on NUMA systems"

* tag 'riscv-for-linus-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Fixup pfn_valid error with wrong max_mapnr

Properties with standard unit suffixes already have a type and don't need
type definitions. They also default to a single entry, so 'maxItems: 1'
can be dropped.

adi,ad5758 is an oddball which defined an enum of arrays. While a valid
schema, it is simpler as a whole to only define scalar constraints.

Cc: Jean Delvare <jdelvare@suse.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: linux-hwmon@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-input@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-watchdog@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sebastian Reichel <sre@kernel.org> # for power-supply
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio
Acked-by: Alexandre TORGUE <alexandre.torgue@foss.st.com>
Link: https://lore.kernel.org/r/20210128194515.743252-1-robh@kernel.org

Pull arm64 fixes from Catalin Marinas:

 - Fix the virt_addr_valid() returning true for < PAGE_OFFSET addresses.

 - Do not blindly trust the DMA masks from ACPI/IORT.

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  ACPI/IORT: Do not blindly trust DMA masks from firmware
  arm64: Fix kernel address detection of __is_lm_address()

Pull btrfs fixes from David Sterba:
 "A few more fixes for a late rc:

   - fix lockdep complaint on 32bit arches and also remove an unsafe
     memory use due to device vs filesystem lifetime

   - two fixes for free space tree:

      * race during log replay and cache rebuild, now more likely to
        happen due to changes in this dev cycle

      * possible free space tree corruption with online conversion
        during initial tree population"

* tag 'for-5.11-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix log replay failure due to race with space cache rebuild
  btrfs: fix lockdep warning due to seqcount_mutex on 32bit arch
  btrfs: fix possible free space tree corruption with online conversion