- Jan 29, 2022
-
-
Manish Chopra authored
commit b7a49f73 upstream This new firmware addresses few important issues and enhancements as mentioned below - - Support direct invalidation of FP HSI Ver per function ID, required for invalidating FP HSI Ver prior to each VF start, as there is no VF start - BRB hardware block parity error detection support for the driver - Fix the FCOE underrun flow - Fix PSOD during FCoE BFS over the NIC ports after preboot driver - Maintains backward compatibility This patch incorporates this new firmware 7.13.21.0 in bnx2x driver. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tvrtko Ursulin authored
commit 7938d615 upstream. We need to flush TLBs before releasing backing store otherwise userspace is able to encounter stale entries if a) it is not declaring access to certain buffers and b) it races with the backing store release from a such undeclared execution already executing on the GPU in parallel. The approach taken is to mark any buffer objects which were ever bound to the GPU and to trigger a serialized TLB flush when their backing store is released. Alternatively the flushing could be done on VMA unbind, at which point we would be able to ascertain whether there is potential a parallel GPU execution (which could race), but essentially it boils down to paying the cost of TLB flushes potentially needlessly at VMA unbind time (when the backing store is not known to be going away so not needed for safety), versus potentially needlessly at backing store relase time (since we at that point cannot tell whether there is anything executing on the GPU which uses that object). Thereforce simplicity of implementation has been chosen for now with scope to benchmark and refine later as required. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reported-by: Sushma Venkatesh Reddy <sushma.venkatesh.reddy@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Dave Airlie <airlied@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- Jan 27, 2022
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20220124184024.407936072@linuxfoundation.org Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Hulk Robot <hulkrobot@huawei.com> Link: https://lore.kernel.org/r/20220125155348.141138434@linuxfoundation.org Tested-by: Pavel Machek (CIP) <pavel@denx.de> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Allen Pais <apais@linux.microsoft.com> Tested-by: Salvatore Bonaccorso <carnil@debian.org> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Tested-by: Fox Chen <foxhlchen@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Hulk Robot <hulkrobot@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mauro Carvalho Chehab authored
commit 87d6576d upstream. The name of the package with ctexhook.sty is different on Debian/Ubuntu. Reported-by: Akira Yokosawa <akiyks@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Tested-by: Akira Yokosawa <akiyks@gmail.com> Link: https://lore.kernel.org/r/63882425609a2820fac78f5e94620abeb7ed5f6f.1641429634.git.mchehab@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mauro Carvalho Chehab authored
commit 7baab965 upstream. After a change meant to fix support for oriental characters (Chinese, Japanese, Korean), ctex stylesheet is now a requirement for PDF output. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Link: https://lore.kernel.org/r/165aa6167f21e3892a6e308688c93c756e94f4e0.1641243581.git.mchehab@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Fabio Estevam authored
commit 09b8cd69 upstream. On an imx6dl-pico-pi board with a QCA9377 SDIO chip, simply trying to connect via ssh to another machine causes: [ 55.824159] ath10k_sdio mmc1:0001:1: failed to transmit packet, dropping: -12 [ 55.832169] ath10k_sdio mmc1:0001:1: failed to submit frame: -12 [ 55.838529] ath10k_sdio mmc1:0001:1: failed to push frame: -12 [ 55.905863] ath10k_sdio mmc1:0001:1: failed to transmit packet, dropping: -12 [ 55.913650] ath10k_sdio mmc1:0001:1: failed to submit frame: -12 [ 55.919887] ath10k_sdio mmc1:0001:1: failed to push frame: -12 , leading to an ssh connection failure. One user inspected the size of frames on Wireshark and reported the followig: "I was able to narrow the issue down to the mtu. If I set the mtu for the wlan0 device to 1486 instead of 1500, the issue does not happen. The size of frames that I see on Wireshark is exactly 1500 after setting it to 1486." Clearing the HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE avoids the problem and the ssh command works successfully after that. Introduce a 'credit_size_workaround' field to ath10k_hw_params for the QCA9377 SDIO, so that the HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE is not set in this case. Tested with QCA9377 SDIO with firmware WLAN.TF.1.1.1-00061-QCATFSWPZ-1. Fixes: 2f918ea9 ("ath10k: enable alt data of TX path for sdio") Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211124131047.713756-1-festevam@denx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Doyle, Patrick authored
commit fd0d8d85 upstream. In the unlikely event that both blocks 10 and 11 are marked as bad (on a 32 bit machine), then the process of marking block 10 as bad stomps on cached entry for block 11. There are (of course) other examples. Signed-off-by: Patrick Doyle <pdoyle@irobot.com> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Yoshio Furuyama <ytc-mb-yfuruyama7@kioxia.com> [<miquel.raynal@bootlin.com>: Fixed the title] Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Frieder Schrempf <frieder.schrempf@kontron.de> Link: https://lore.kernel.org/linux-mtd/774a92693f311e7de01e5935e720a179fb1b2468.1616635406.git.ytc-mb-yfuruyama7@kioxia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andrey Konovalov authored
commit e073e5ef upstream. Make do_kmem_cache_size_bulk() destroy the cache it creates. Link: https://lkml.kernel.org/r/aced20a94bf04159a139f0846e41d38a1537debb.1640018297.git.andreyknvl@google.com Fixes: 03a9349a ("lib/test_meminit: add a kmem_cache_alloc_bulk() test") Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alistair Popple authored
commit 87c01d57 upstream. hmm_range_fault() can be used instead of get_user_pages() for devices which allow faulting however unlike get_user_pages() it will return an error when used on a VM_MIXEDMAP range. To make hmm_range_fault() more closely match get_user_pages() remove this restriction. This requires dealing with the !ARCH_HAS_PTE_SPECIAL case in hmm_vma_handle_pte(). Rather than replicating the logic of vm_normal_page() call it directly and do a check for the zero pfn similar to what get_user_pages() currently does. Also add a test to hmm selftest to verify functionality. Link: https://lkml.kernel.org/r/20211104012001.2555676-1-apopple@nvidia.com Fixes: da4c3c73 ("mm/hmm/mirror: helper to snapshot CPU page table") Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Miaoqian Lin authored
commit 99218cbf upstream. platform_get_irq() returns negative error number instead 0 on failure. And the doc of platform_get_irq() provides a usage example: int irq = platform_get_irq(pdev, 0); if (irq < 0) return irq; Fix the check of return value to catch errors correctly. Fixes: 11597885 ("i825xx: Move the Intel 82586/82593/82596 based drivers") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Matthias Schiffer authored
commit d8adf5b9 upstream. dtx_diff suggests to use <(...) syntax to pipe two inputs into it, but this has never worked: The /proc/self/fds/... paths passed by the shell will fail the `[ -f "${dtx}" ] && [ -r "${dtx}" ]` check in compile_to_dts, but even with this check removed, the function cannot work: hexdump will eat up the DTB magic, making the subsequent dtc call fail, as a pipe cannot be rewound. Simply remove this broken example, as there is already an alternative one that works fine. Fixes: 10eadc25 ("dtc: create tool to diff device trees") Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220113081918.10387-1-matthias.schiffer@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sam Protsenko authored
commit 33950f9a upstream. Exynos7 watchdog driver is clearly indicating that its dts node must define syscon phandle property. That was probably forgotten, so add it. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Fixes: 2b9366b6 ("watchdog: s3c2410_wdt: Add support for Watchdog device on Exynos7") Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211107202943.8859-2-semen.protsenko@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Stein authored
commit 640f35b8 upstream. This property was already mentioned in the old textual bindings amlogic,meson-vpu.txt, but got dropped during conversion. Adding it back similar to amlogic,gx-vdec.yaml. Fixes: 6b9ebf1e ("dt-bindings: display: amlogic, meson-vpu: convert to yaml") Signed-off-by: Alexander Stein <alexander.stein@mailbox.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211219094155.177206-1-alexander.stein@mailbox.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Stein authored
commit 22bf4047 upstream. This is used in meson-gx and meson-g12. Add the property to the binding. This fixes the dtschema warning: hdmi-tx@c883a000: 'sound-name-prefix' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Alexander Stein <alexander.stein@mailbox.org> Fixes: 376bf52d ("dt-bindings: display: amlogic, meson-dw-hdmi: convert to yaml") Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211223122434.39378-2-alexander.stein@mailbox.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tom Rix authored
commit baa59504 upstream. Clang static analysis reports this issue ocelot_flower.c:563:8: warning: 1st function call argument is an uninitialized value !is_zero_ether_addr(match.mask->dst)) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The variable match is used before it is set. So move the block. Fixes: 75944fda ("net: mscc: ocelot: offload ingress skbedit and vlan actions to VCAP IS1") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Russell King (Oracle) authored
commit 5765cee1 upstream. Commit 7cfa9c92 ("net: sfp: avoid power switch on address-change modules") unintetionally changed the semantics for high power modules without the digital diagnostics monitoring. We repeatedly attempt to read the power status from the non-existing 0xa2 address in a futile hope this failure is temporary: [ 8.856051] sfp sfp-eth3: module NTT 0000000000000000 rev 0000 sn 0000000000000000 dc 160408 [ 8.865843] mvpp2 f4000000.ethernet eth3: switched to inband/1000base-x link mode [ 8.873469] sfp sfp-eth3: Failed to read EEPROM: -5 [ 8.983251] sfp sfp-eth3: Failed to read EEPROM: -5 [ 9.103250] sfp sfp-eth3: Failed to read EEPROM: -5 We previosuly assumed such modules were powered up in the correct mode, continuing without further configuration as long as the required power class was supported by the host. Restore this behaviour, while preserving the intent of subsequent patches to avoid the "Address Change Sequence not supported" warning if we are not going to be accessing the DDM address. Fixes: 7cfa9c92 ("net: sfp: avoid power switch on address-change modules") Reported-by: 照山周一郎 <teruyama@springboard-inc.jp> Tested-by: 照山周一郎 <teruyama@springboard-inc.jp> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tom Rix authored
commit 214b3369 upstream. Clang static analysis reports this problem mtk_eth_soc.c:394:7: warning: Branch condition evaluates to a garbage value if (err) ^~~ err is not initialized and only conditionally set. So intitialize err. Fixes: 7e538372 ("net: ethernet: mediatek: Re-add support SGMII") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sergey Shtylyov authored
commit 9deb48b5 upstream. The driver neglects to check the result of platform_get_irq_optional()'s call and blithely passes the negative error codes to devm_request_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL. Stop calling devm_request_irq() with the invalid IRQ #s. Fixes: 8562056f ("net: bcmgenet: request Wake-on-LAN interrupt") Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kevin Bracey authored
commit fb80445c upstream. commit 56b765b7 ("htb: improved accuracy at high rates") broke "overhead X", "linklayer atm" and "mpu X" attributes. "overhead X" and "linklayer atm" have already been fixed. This restores the "mpu X" handling, as might be used by DOCSIS or Ethernet shaping: tc class add ... htb rate X overhead 4 mpu 64 The code being fixed is used by htb, tbf and act_police. Cake has its own mpu handling. qdisc_calculate_pkt_len still uses the size table containing values adjusted for mpu by user space. iproute2 tc has always passed mpu into the kernel via a tc_ratespec structure, but the kernel never directly acted on it, merely stored it so that it could be read back by `tc class show`. Rather, tc would generate length-to-time tables that included the mpu (and linklayer) in their construction, and the kernel used those tables. Since v3.7, the tables were no longer used. Along with "mpu", this also broke "overhead" and "linklayer" which were fixed in 01cb71d2 ("net_sched: restore "overhead xxx" handling", v3.10) and 8a8e3d84 ("net_sched: restore "linklayer atm" handling", v3.11). "overhead" was fixed by simply restoring use of tc_ratespec::overhead - this had originally been used by the kernel but was initially omitted from the new non-table-based calculations. "linklayer" had been handled in the table like "mpu", but the mode was not originally passed in tc_ratespec. The new implementation was made to handle it by getting new versions of tc to pass the mode in an extended tc_ratespec, and for older versions of tc the table contents were analysed at load time to deduce linklayer. As "mpu" has always been given to the kernel in tc_ratespec, accompanying the mpu-based table, we can restore system functionality with no userspace change by making the kernel act on the tc_ratespec value. Fixes: 56b765b7 ("htb: improved accuracy at high rates") Signed-off-by: Kevin Bracey <kevin@bracey.fi> Cc: Eric Dumazet <edumazet@google.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: Vimalkumar <j.vimal@gmail.com> Link: https://lore.kernel.org/r/20220112170210.1014351-1-kevin@bracey.fi Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jie Wang authored
commit 4e5bd03a upstream. In Linux bonding scenario, one packet is copied to several copies and sent by all slave device of bond0 in mode 3(broadcast mode). The mode 3 xmit function bond_xmit_broadcast() only ueses the last slave device's tx result as the final result. In this case, if the last slave device is down, then it always return NET_XMIT_DROP, even though the other slave devices xmit success. It may cause the tx statistics error, and cause the application (e.g. scp) consider the network is unreachable. For example, use the following command to configure server A. echo 3 > /sys/class/net/bond0/bonding/mode ifconfig bond0 up ifenslave bond0 eth0 eth1 ifconfig bond0 192.168.1.125 ifconfig eth0 up ifconfig eth1 down The slave device eth0 and eth1 are connected to server B(192.168.1.107). Run the ping 192.168.1.107 -c 3 -i 0.2 command, the following information is displayed. PING 192.168.1.107 (192.168.1.107) 56(84) bytes of data. 64 bytes from 192.168.1.107: icmp_seq=1 ttl=64 time=0.077 ms 64 bytes from 192.168.1.107: icmp_seq=2 ttl=64 time=0.056 ms 64 bytes from 192.168.1.107: icmp_seq=3 ttl=64 time=0.051 ms 192.168.1.107 ping statistics 0 packets transmitted, 3 received Actually, the slave device eth0 of the bond successfully sends three ICMP packets, but the result shows that 0 packets are transmitted. Also if we use scp command to get remote files, the command end with the following printings. ssh_exchange_identification: read: Connection timed out So this patch modifies the bond_xmit_broadcast to return NET_XMIT_SUCCESS if one slave device in the bond sends packets successfully. If all slave devices send packets fail, the discarded packets stats is increased. The skb is released when there is no slave device in the bond or the last slave device is down. Fixes: ae46f184 ("bonding: propagate transmit status") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Heidelberg authored
commit c41910f2 upstream. These properties aren't documented nor implemented in the driver. Drop them. Fixes warnings as: $ make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/msm/gpu.yaml ... arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml: gpu@b00000: 'qcom,gpu-quirk-fault-detect-mask', 'qcom,gpu-quirk-two-pass-use-wfi' do not match any of the regexes: 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/display/msm/gpu.yaml ... Fixes: 69cc3114 ("arm64: dts: Add Adreno GPU definitions") Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211030100413.28370-1-david@ixit.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Leon Romanovsky authored
commit e9538f82 upstream. DEVLINK_CMD_HEALTH_REPORTER_DUMP_GET command doesn't have .doit callback and has no use in internal_flags at all. Remove this misleading assignment. Fixes: e44ef4e4 ("devlink: Hang reporter's dump method on a dumpit cb") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Zechuan Chen authored
commit 4624f199 upstream. Because of commit bf794bf5 ("powerpc/kprobes: Fix kallsyms lookup across powerpc ABIv1 and ABIv2"), in ppc64 ABIv1, our perf command eliminates the need to use the prefix "." at the symbol name. But when the command "perf probe -a schedule" is executed on ppc64 ABIv1, it obtains two symbol address information through /proc/kallsyms, for example: cat /proc/kallsyms | grep -w schedule c000000000657020 T .schedule c000000000d4fdb8 D schedule The symbol "D schedule" is not a function symbol, and perf will print: "p:probe/schedule _text+13958584"Failed to write event: Invalid argument Therefore, when searching symbols from map and adding probe point for them, a symbol type check is added. If the type of symbol is not a function, skip it. Fixes: bf794bf5 ("powerpc/kprobes: Fix kallsyms lookup across powerpc ABIv1 and ABIv2") Signed-off-by: Zechuan Chen <chenzechuan1@huawei.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jianlin Lv <Jianlin.Lv@arm.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Yang Jihong <yangjihong1@huawei.com> Link: https://lore.kernel.org/r/20211228111338.218602-1-chenzechuan1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tudor Ambarus authored
commit 912f7c6f upstream. The hardware channel next descriptor view structure contains just fields of 32 bits, while dma_addr_t can be of type u64 or u32 depending on CONFIG_ARCH_DMA_ADDR_T_64BIT. Force u32 to comply with what the hardware expects. Fixes: e1f7c9ee ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20211215110115.191749-11-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tudor Ambarus authored
commit 1385eb4d upstream. AT_XDMAC_CNDC_NDVIEW_NDV3 was set even for AT_XDMAC_MBR_UBC_NDV2, because of the wrong bit handling. Fix it. Fixes: ee0fe35c ("dmaengine: xdmac: Handle descriptor's view 3 registers") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20211215110115.191749-10-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tudor Ambarus authored
commit 18deddea upstream. Since tx_submit can be called from a hard IRQ, xfers_list must be protected with a lock to avoid concurency on the list's elements. Since at_xdmac_handle_cyclic() is called from a tasklet, spin_lock_irq is enough to protect from a hard IRQ. Fixes: e1f7c9ee ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20211215110115.191749-8-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tudor Ambarus authored
commit 5edc24ac upstream. It is desirable to do the prints without the lock held if possible, so move the print after the lock is released. Fixes: e1f7c9ee ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20211215110115.191749-4-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tudor Ambarus authored
commit e6af9b05 upstream. Cyclic channels must too call issue_pending in order to start a transfer. Start the transfer in issue_pending regardless of the type of channel. This wrongly worked before, because in the past the transfer was started at tx_submit level when only a desc in the transfer list. Fixes: e1f7c9ee ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20211215110115.191749-3-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tudor Ambarus authored
commit bccfb96b upstream. tx_submit is supposed to push the current transaction descriptor to a pending queue, waiting for issue_pending() to be called. issue_pending() must start the transfer, not tx_submit(), thus remove at_xdmac_start_xfer() from at_xdmac_tx_submit(). Clients of at_xdmac that assume that tx_submit() starts the transfer must be updated and call dma_async_issue_pending() if they miss to call it (one example is atmel_serial). As the at_xdmac_start_xfer() is now called only from at_xdmac_advance_work() when !at_xdmac_chan_is_enabled(), the at_xdmac_chan_is_enabled() check is no longer needed in at_xdmac_start_xfer(), thus remove it. Fixes: e1f7c9ee ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20211215110115.191749-2-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Adrian Hunter authored
commit 62942e9f upstream. Using grep -C with perf script -D can give erroneous results as grep loses lines due to non-printable characters, for example, below the 0020, 0060 and 0070 lines are missing: $ perf script -D | grep -C10 AUX | head . 0010: 08 00 00 00 00 00 00 00 1f 00 00 00 00 00 00 00 ................ . 0030: 01 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 ................ . 0040: 00 08 00 00 00 00 00 00 02 00 00 00 00 00 00 00 ................ . 0050: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................ . 0080: 02 00 00 00 00 00 00 00 1b 00 00 00 00 00 00 00 ................ . 0090: 00 00 00 00 00 00 00 00 ........ 0 0 0x450 [0x98]: PERF_RECORD_AUXTRACE_INFO type: 1 PMU Type 8 Time Shift 31 perf's isprint() is a custom implementation from the kernel, but the kernel's _ctype appears to include characters from Latin-1 Supplement which is not compatible with, for example, UTF-8. Fix by checking also isascii(). After: $ tools/perf/perf script -D | grep -C10 AUX | head . 0010: 08 00 00 00 00 00 00 00 1f 00 00 00 00 00 00 00 ................ . 0020: 03 84 32 2f 00 00 00 00 63 7c 4f d2 fa ff ff ff ..2/....c|O..... . 0030: 01 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 ................ . 0040: 00 08 00 00 00 00 00 00 02 00 00 00 00 00 00 00 ................ . 0050: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................ . 0060: 00 02 00 00 00 00 00 00 00 c0 03 00 00 00 00 00 ................ . 0070: e2 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 ................ . 0080: 02 00 00 00 00 00 00 00 1b 00 00 00 00 00 00 00 ................ . 0090: 00 00 00 00 00 00 00 00 ........ Fixes: 3052ba56 ("tools perf: Move from sane_ctype.h obtained from git to the Linux's original") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lore.kernel.org/lkml/20220112085057.277205-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Guillaume Nault authored
commit a915deaa upstream. Mask the ECN bits before calling ip_route_output_ports(). The tos variable might be passed directly from an IPv4 header, so it may have the last ECN bit set. This interferes with the route lookup process as ip_route_output_key_hash() interpretes this bit specially (to restrict the route scope). Found by code inspection, compile tested only. Fixes: 804c2f3e ("libcxgb,iw_cxgb4,cxgbit: add cxgb_find_route()") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Guillaume Nault authored
commit f7716b31 upstream. Mask the ECN bits before initialising ->flowi4_tos. The tunnel key may have the last ECN bit set, which will interfere with the route lookup process as ip_route_output_key_hash() interpretes this bit specially (to restrict the route scope). Found by code inspection, compile tested only. Fixes: 962924fa ("ip_gre: Refactor collect metatdata mode tunnel xmit to ip_md_tunnel_xmit") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Guillaume Nault authored
commit 23e7b1bf upstream. Similar to commit 94e22389 ("xfrm4: strip ECN bits from tos field"), clear the ECN bits from iph->tos when setting ->flowi4_tos. This ensures that the last bit of ->flowi4_tos is cleared, so ip_route_output_key_hash() isn't going to restrict the scope of the route lookup. Use ~INET_ECN_MASK instead of IPTOS_RT_MASK, because we have no reason to clear the high order bits. Found by code inspection, compile tested only. Fixes: 4da3089f ("[IPSEC]: Use TOS when doing tunnel lookups") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
commit 2836615a upstream. When under stress, cleanup_net() can have to dismantle netns in big numbers. ops_exit_list() currently calls many helpers [1] that have no schedule point, and we can end up with soft lockups, particularly on hosts with many cpus. Even for moderate amount of netns processed by cleanup_net() this patch avoids latency spikes. [1] Some of these helpers like fib_sync_up() and fib_sync_down_dev() are very slow because net/ipv4/fib_semantics.c uses host-wide hash tables, and ifindex is used as the only input of two hash functions. ifindexes tend to be the same for all netns (lo.ifindex==1 per instance) This will be fixed in a separate patch. Fixes: 72ad937a ("net: Add support for batching network namespace cleanups") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
commit 91341fa0 upstream. Both fields can be read/written without synchronization, add proper accessors and documentation. Fixes: d5dd8879 ("inet: fix various use-after-free in defrags units") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric W. Biederman authored
commit 1b5a42d9 upstream. In the function bacct_add_task the code reading task->exit_code was introduced in commit f3cef7a9 ("[PATCH] csa: basic accounting over taskstats"), and it is not entirely clear what the taskstats interface is trying to return as only returning the exit_code of the first task in a process doesn't make a lot of sense. As best as I can figure the intent is to return task->exit_code after a task exits. The field is returned with per task fields, so the exit_code of the entire process is not wanted. Only the value of the first task is returned so this is not a useful way to get the per task ptrace stop code. The ordinary case of returning this value is returning after a task exits, which also precludes use for getting a ptrace value. It is common to for the first task of a process to also be the last task of a process so this field may have done something reasonable by accident in testing. Make ac_exitcode a reliable per task value by always returning it for every exited task. Setting ac_exitcode in a sensible mannter makes it possible to continue to provide this value going forward. Cc: Balbir Singh <bsingharora@gmail.com> Fixes: f3cef7a9 ("[PATCH] csa: basic accounting over taskstats") Link: https://lkml.kernel.org/r/20220103213312.9144-5-ebiederm@xmission.com Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael S. Tsirkin authored
commit 1861ba62 upstream. A recently added error path does not mark ring unused when exiting on OOM, which will lead to BUG on the next entry in debug builds. TODO: refactor code so we have START_USE and END_USE in the same function. Fixes: fc6d70f4 ("virtio_ring: check desc == NULL when using indirect with packed") Cc: "Xuan Zhuo" <xuanzhuo@linux.alibaba.com> Cc: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eli Cohen authored
commit 97143b70 upstream. Remove overriding of virtio_version_1_0 which forced the virtqueue object to version 1. Fixes: 1a86b377 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20211230142024.142979-1-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Laurence de Bruxelles authored
commit 34127b36 upstream. With the latest stable kernel versions the rtc on the PXA based Zaurus does not work, when booting I see the following kernel messages: pxa-rtc pxa-rtc: failed to find rtc clock source pxa-rtc pxa-rtc: Unable to init SA1100 RTC sub-device pxa-rtc: probe of pxa-rtc failed with error -2 hctosys: unable to open rtc device (rtc0) I think this is because commit f2997775 ("rtc: sa1100: fix possible race condition") moved the allocation of the rtc_device struct out of sa1100_rtc_init and into sa1100_rtc_probe. This means that pxa_rtc_probe also needs to do allocation for the rtc_device struct, otherwise sa1100_rtc_init will try to dereference a null pointer. This patch adds that allocation by copying how sa1100_rtc_probe in drivers/rtc/rtc-sa1100.c does it; after the IRQs are set up a managed rtc_device is allocated. I've tested this patch with `qemu-system-arm -machine akita` and with a real Zaurus SL-C1000 applied to 4.19, 5.4, and 5.10. Signed-off-by: Laurence de Bruxelles <lfdebrux@gmail.com> Fixes: f2997775 ("rtc: sa1100: fix possible race condition") Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220101154149.12026-1-lfdebrux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dmitry Torokhov authored
commit 3fe6acd4 upstream. Unfortunately details of USB HID transport bled into HID core and handling of numbered/unnumbered reports is quite a mess, with hid_report_len() calculating the length according to USB rules, and hid_hw_raw_request() adding report ID to the buffer for both numbered and unnumbered reports. Untangling it all requres a lot of changes in HID, so for now let's handle this in the driver. [jkosina@suse.cz: microoptimize field->report->id to report->id] Fixes: 14c9c014 ("HID: add vivaldi HID driver") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Tested-by: Stephen Boyd <swboyd@chromium.org> # CoachZ Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-