- Dec 08, 2023
-
-
Huacai Chen authored
[ Upstream commit 83767a67 ] After commit 411740f5 ("KVM: MIPS/MMU: Implement KVM_CAP_SYNC_MMU") old_pte is no longer used in kvm_mips_map_page(). So remove it to fix a build warning about variable set but not used: arch/mips/kvm/mmu.c: In function 'kvm_mips_map_page': >> arch/mips/kvm/mmu.c:701:29: warning: variable 'old_pte' set but not used [-Wunused-but-set-variable] 701 | pte_t *ptep, entry, old_pte; | ^~~~~~~ Cc: stable@vger.kernel.org Fixes: 411740f5 ("KVM: MIPS/MMU: Implement KVM_CAP_SYNC_MMU") Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202310070530.aARZCSfh-lkp@intel.com/ Signed-off-by:
Huacai Chen <chenhuacai@loongson.cn> Reviewed-by:
Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Samuel Holland authored
[ Upstream commit fd0413bb ] Due to a typo, the code checked the RX checksum feature in the TX path. Fixes: 8a3b7a25 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by:
Samuel Holland <samuel.holland@sifive.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Link: https://lore.kernel.org/r/20231122004219.3504219-1-samuel.holland@sifive.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Raju Rangoju authored
[ Upstream commit 7a2323ac ] xgbe_get_link_ksettings() does not propagate correct speed and duplex information to ethtool during cable unplug. Due to which ethtool reports incorrect values for speed and duplex. Address this by propagating correct information. Fixes: 7c12aa08 ("amd-xgbe: Move the PHY support into amd-xgbe") Acked-by:
Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by:
Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by:
Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Raju Rangoju authored
[ Upstream commit 7121205d ] The existing implementation uses software logic to accumulate tx completions until the specified time (1ms) is met and then poll them. However, there exists a tiny gap which leads to a race between resetting and checking the tx_activate flag. Due to this the tx completions are not reported to upper layer and tx queue timeout kicks-in restarting the device. To address this, introduce a tx cleanup mechanism as part of the periodic maintenance process. Fixes: c5aa9e3b ("amd-xgbe: Initial AMD 10GbE platform driver") Acked-by:
Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by:
Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by:
Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Raju Rangoju authored
[ Upstream commit 676ec538 ] Force the mode change for SFI in Fixed PHY configurations. Fixed PHY configurations needs PLL to be enabled while doing mode set. When the SFP module isn't connected during boot, driver assumes AN is ON and attempts auto-negotiation. However, if the connected SFP comes up in Fixed PHY configuration the link will not come up as PLL isn't enabled while the initial mode set command is issued. So, force the mode change for SFI in Fixed PHY configuration to fix link issues. Fixes: e57f7a3f ("amd-xgbe: Prepare for working with more than one type of phy") Acked-by:
Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by:
Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by:
Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Stefano Stabellini authored
[ Upstream commit 7bf9a6b4 ] xen_vcpu_info is a percpu area than needs to be mapped by Xen. Currently, it could cross a page boundary resulting in Xen being unable to map it: [ 0.567318] kernel BUG at arch/arm64/xen/../../arm/xen/enlighten.c:164! [ 0.574002] Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Fix the issue by using __alloc_percpu and requesting alignment for the memory allocation. Signed-off-by:
Stefano Stabellini <stefano.stabellini@amd.com> Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2311221501340.2053963@ubuntu-linux-20-04-desktop Fixes: 24d5373d ("arm/xen: Use alloc_percpu rather than __alloc_percpu") Reviewed-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jose Ignacio Tornos Martinez authored
[ Upstream commit 0739af07 ] Using generic ASIX Electronics Corp. AX88179 Gigabit Ethernet device, the following test cycle has been implemented: - power on - check logs - shutdown - after detecting the system shutdown, disconnect power - after approximately 60 seconds of sleep, power is restored Running some cycles, sometimes error logs like this appear: kernel: ax88179_178a 2-9:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0001: -19 kernel: ax88179_178a 2-9:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0001: -19 ... These failed operation are happening during ax88179_reset execution, so the initialization could not be correct. In order to avoid this, we need to increase the delay after reset and clock initial operations. By using these larger values, many cycles have been run and no failed operations appear. It would be better to check some status register to verify when the operation has finished, but I do not have found any available information (neither in the public datasheets nor in the manufacturer's driver). The only available information for the necessary delays is the maufacturer's driver (original values) but the proposed values are not enough for the tested devices. Fixes: e2ca90c2 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Reported-by:
Herb Wei <weihao.bj@ieisystem.com> Tested-by:
Herb Wei <weihao.bj@ieisystem.com> Signed-off-by:
Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Link: https://lore.kernel.org/r/20231120120642.54334-1-jtornosm@redhat.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Kunwu Chan authored
[ Upstream commit c0e29262 ] net/ipv4/route.c:783:46: warning: incorrect type in argument 2 (different base types) net/ipv4/route.c:783:46: expected unsigned int [usertype] key net/ipv4/route.c:783:46: got restricted __be32 [usertype] new_gw Fixes: 969447f2 ("ipv4: use new_gw for redirect neigh lookup") Suggested-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Kunwu Chan <chentao@kylinos.cn> Link: https://lore.kernel.org/r/20231119141759.420477-1-chentao@kylinos.cn Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Charles Yi authored
[ Upstream commit fc43e9c8 ] hid_debug_events_release releases resources bound to the HID device instance. hid_device_release releases the underlying HID device instance potentially before hid_debug_events_release has completed releasing debug resources bound to the same HID device instance. Reference count to prevent the HID device instance from being torn down preemptively when HID debugging support is used. When count reaches zero, release core resources of HID device instance using hiddev_free. The crash: [ 120.728477][ T4396] kernel BUG at lib/list_debug.c:53! [ 120.728505][ T4396] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 120.739806][ T4396] Modules linked in: bcmdhd dhd_static_buf 8822cu pcie_mhi r8168 [ 120.747386][ T4396] CPU: 1 PID: 4396 Comm: hidt_bridge Not tainted 5.10.110 #257 [ 120.754771][ T4396] Hardware name: Rockchip RK3588 EVB4 LP4 V10 Board (DT) [ 120.761643][ T4396] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 120.768338][ T4396] pc : __list_del_entry_valid+0x98/0xac [ 120.773730][ T4396] lr : __list_del_entry_valid+0x98/0xac [ 120.779120][ T4396] sp : ffffffc01e62bb60 [ 120.783126][ T4396] x29: ffffffc01e62bb60 x28: ffffff818ce3a200 [ 120.789126][ T4396] x27: 0000000000000009 x26: 0000000000980000 [ 120.795126][ T4396] x25: ffffffc012431000 x24: ffffff802c6d4e00 [ 120.801125][ T4396] x23: ffffff8005c66f00 x22: ffffffc01183b5b8 [ 120.807125][ T4396] x21: ffffff819df2f100 x20: 0000000000000000 [ 120.813124][ T4396] x19: ffffff802c3f0700 x18: ffffffc01d2cd058 [ 120.819124][ T4396] x17: 0000000000000000 x16: 0000000000000000 [ 120.825124][ T4396] x15: 0000000000000004 x14: 0000000000003fff [ 120.831123][ T4396] x13: ffffffc012085588 x12: 0000000000000003 [ 120.837123][ T4396] x11: 00000000ffffbfff x10: 0000000000000003 [ 120.843123][ T4396] x9 : 455103d46b329300 x8 : 455103d46b329300 [ 120.849124][ T4396] x7 : 74707572726f6320 x6 : ffffffc0124b8cb5 [ 120.855124][ T4396] x5 : ffffffffffffffff x4 : 0000000000000000 [ 120.861123][ T4396] x3 : ffffffc011cf4f90 x2 : ffffff81fee7b948 [ 120.867122][ T4396] x1 : ffffffc011cf4f90 x0 : 0000000000000054 [ 120.873122][ T4396] Call trace: [ 120.876259][ T4396] __list_del_entry_valid+0x98/0xac [ 120.881304][ T4396] hid_debug_events_release+0x48/0x12c [ 120.886617][ T4396] full_proxy_release+0x50/0xbc [ 120.891323][ T4396] __fput+0xdc/0x238 [ 120.895075][ T4396] ____fput+0x14/0x24 [ 120.898911][ T4396] task_work_run+0x90/0x148 [ 120.903268][ T4396] do_exit+0x1bc/0x8a4 [ 120.907193][ T4396] do_group_exit+0x8c/0xa4 [ 120.911458][ T4396] get_signal+0x468/0x744 [ 120.915643][ T4396] do_signal+0x84/0x280 [ 120.919650][ T4396] do_notify_resume+0xd0/0x218 [ 120.924262][ T4396] work_pending+0xc/0x3f0 [ Rahul Rameshbabu <sergeantsagara@protonmail.com>: rework changelog ] Fixes: cd667ce2 ("HID: use debugfs for events/reports dumping") Signed-off-by:
Charles Yi <be286@163.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Benjamin Tissoires authored
[ Upstream commit 1e839143 ] This unique identifier is currently used only for ensuring uniqueness in sysfs. However, this could be handful for userspace to refer to a specific hid_device by this id. 2 use cases are in my mind: LEDs (and their naming convention), and HID-BPF. Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20220902132938.2409206-9-benjamin.tissoires@redhat.com Stable-dep-of: fc43e9c8 ("HID: fix HID device resource race between HID core and debugging support") Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jonas Karlman authored
[ Upstream commit bb0a05ac ] Use of DRM_FORMAT_RGB888 and DRM_FORMAT_BGR888 on e.g. RK3288, RK3328 and RK3399 result in wrong colors being displayed. The issue can be observed using modetest: modetest -s <connector_id>@<crtc_id>:1920x1080-60@RG24 modetest -s <connector_id>@<crtc_id>:1920x1080-60@BG24 Vendor 4.4 kernel apply an inverted rb swap for these formats on VOP full framework (IP version 3.x) compared to VOP little framework (2.x). Fix colors by applying different rb swap for VOP full framework (3.x) and VOP little framework (2.x) similar to vendor 4.4 kernel. Fixes: 85a359f2 ("drm/rockchip: Add BGR formats to VOP") Signed-off-by:
Jonas Karlman <jonas@kwiboo.se> Tested-by:
Diederik de Haas <didi.debian@cknow.org> Reviewed-by:
Christopher Obbard <chris.obbard@collabora.com> Tested-by:
Christopher Obbard <chris.obbard@collabora.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20231026191500.2994225-1-jonas@kwiboo.se Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
倪琛 authored
[ Upstream commit a6925165 ] Add missing error return check for devm_ioport_map() and return the error if this function call fails. Fixes: 0d5ff566 ("libata: convert to iomap") Signed-off-by:
Chen Ni <nichen@iscas.ac.cn> Reviewed-by:
Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by:
Damien Le Moal <dlemoal@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Marek Vasut authored
[ Upstream commit 3f9a91b6 ] The Innolux G101ICE-L01 datasheet [1] page 17 table 6.1 INPUT SIGNAL TIMING SPECIFICATIONS indicates that maximum vertical blanking time is 40 lines. Currently the driver uses 29 lines. Fix it, and since this panel is a DE panel, adjust the timings to make them less hostile to controllers which cannot do 1 px HSA/VSA, distribute the delays evenly between all three parts. [1] https://www.data-modul.com/sites/default/files/products/G101ICE-L01-C2-specification-12042389.pdf Fixes: 1e29b840 ("drm/panel: simple: Add Innolux G101ICE-L01 panel") Signed-off-by:
Marek Vasut <marex@denx.de> Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231008223256.279196-1-marex@denx.de Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Christopher Bednarz authored
commit bb6d73d9 upstream. Currently irdma allows zero-length STAGs to be programmed in HW during the kernel mode fast register flow. Zero-length MR or STAG registration disable HW memory length checks. Improve gaps in bounds checking in irdma by preventing zero-length STAG or MR registrations except if the IB_PD_UNSAFE_GLOBAL_RKEY is set. This addresses the disclosure CVE-2023-25775. Fixes: b48c24c2 ("RDMA/irdma: Implement device supported verb APIs") Signed-off-by:
Christopher Bednarz <christopher.n.bednarz@intel.com> Signed-off-by:
Shiraz Saleem <shiraz.saleem@intel.com> Link: https://lore.kernel.org/r/20230818144838.1758-1-shiraz.saleem@intel.com Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Saravana Kannan authored
commit 2e84dc37 upstream. This commit fixes a bug in commit 9ed98953 ("driver core: Functional dependencies tracking support") where the device link status was incorrectly updated in the driver unbind path before all the device's resources were released. Fixes: 9ed98953 ("driver core: Functional dependencies tracking support") Cc: stable <stable@kernel.org> Reported-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Closes: https://lore.kernel.org/all/20231014161721.f4iqyroddkcyoefo@pengutronix.de/ Signed-off-by:
Saravana Kannan <saravanak@google.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Yang Yingliang <yangyingliang@huawei.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Mark Brown <broonie@kernel.org> Cc: Matti Vaittinen <mazziesaccount@gmail.com> Cc: James Clark <james.clark@arm.com> Acked-by:
"Rafael J. Wysocki" <rafael@kernel.org> Tested-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20231018013851.3303928-1-saravanak@google.com Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- Nov 29, 2023
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20231124171934.122298957@linuxfoundation.org Link: https://lore.kernel.org/r/20231125163104.203147306@linuxfoundation.org Tested-by:
Pavel Machek (CIP) <pavel@denx.de> Link: https://lore.kernel.org/r/20231126154323.146332656@linuxfoundation.org Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
commit ebda44da upstream. We had one syzbot report [1] in syzbot queue for a while. I was waiting for more occurrences and/or a repro but Dmitry Vyukov spotted the issue right away. <quoting Dmitry> qdisc_graft() drops reference to qdisc in notify_and_destroy while it's still assigned to dev->qdisc </quoting> Indeed, RCU rules are clear when replacing a data structure. The visible pointer (dev->qdisc in this case) must be updated to the new object _before_ RCU grace period is started (qdisc_put(old) in this case). [1] BUG: KASAN: use-after-free in __tcf_qdisc_find.part.0+0xa3a/0xac0 net/sched/cls_api.c:1066 Read of size 4 at addr ffff88802065e038 by task syz-executor.4/21027 CPU: 0 PID: 21027 Comm: syz-executor.4 Not tainted 6.0.0-rc3-syzkaller-00363-g7726d4c3e60b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:317 [inline] print_report.cold+0x2ba/0x719 mm/kasan/report.c:433 kasan_report+0xb1/0x1e0 mm/kasan/report.c:495 __tcf_qdisc_find.part.0+0xa3a/0xac0 net/sched/cls_api.c:1066 __tcf_qdisc_find net/sched/cls_api.c:1051 [inline] tc_new_tfilter+0x34f/0x2200 net/sched/cls_api.c:2018 rtnetlink_rcv_msg+0x955/0xca0 net/core/rtnetlink.c:6081 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2482 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2536 __sys_sendmsg+0xf3/0x1c0 net/socket.c:2565 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f5efaa89279 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f5efbc31168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f5efab9bf80 RCX: 00007f5efaa89279 RDX: 0000000000000000 RSI: 0000000020000140 RDI: 0000000000000005 RBP: 00007f5efaae32e9 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f5efb0cfb1f R14: 00007f5efbc31300 R15: 0000000000022000 </TASK> Allocated by task 21027: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:45 [inline] set_alloc_info mm/kasan/common.c:437 [inline] ____kasan_kmalloc mm/kasan/common.c:516 [inline] ____kasan_kmalloc mm/kasan/common.c:475 [inline] __kasan_kmalloc+0xa9/0xd0 mm/kasan/common.c:525 kmalloc_node include/linux/slab.h:623 [inline] kzalloc_node include/linux/slab.h:744 [inline] qdisc_alloc+0xb0/0xc50 net/sched/sch_generic.c:938 qdisc_create_dflt+0x71/0x4a0 net/sched/sch_generic.c:997 attach_one_default_qdisc net/sched/sch_generic.c:1152 [inline] netdev_for_each_tx_queue include/linux/netdevice.h:2437 [inline] attach_default_qdiscs net/sched/sch_generic.c:1170 [inline] dev_activate+0x760/0xcd0 net/sched/sch_generic.c:1229 __dev_open+0x393/0x4d0 net/core/dev.c:1441 __dev_change_flags+0x583/0x750 net/core/dev.c:8556 rtnl_configure_link+0xee/0x240 net/core/rtnetlink.c:3189 rtnl_newlink_create net/core/rtnetlink.c:3371 [inline] __rtnl_newlink+0x10b8/0x17e0 net/core/rtnetlink.c:3580 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3593 rtnetlink_rcv_msg+0x43a/0xca0 net/core/rtnetlink.c:6090 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2482 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2536 __sys_sendmsg+0xf3/0x1c0 net/socket.c:2565 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 21020: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track+0x21/0x30 mm/kasan/common.c:45 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370 ____kasan_slab_free mm/kasan/common.c:367 [inline] ____kasan_slab_free+0x166/0x1c0 mm/kasan/common.c:329 kasan_slab_free include/linux/kasan.h:200 [inline] slab_free_hook mm/slub.c:1754 [inline] slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1780 slab_free mm/slub.c:3534 [inline] kfree+0xe2/0x580 mm/slub.c:4562 rcu_do_batch kernel/rcu/tree.c:2245 [inline] rcu_core+0x7b5/0x1890 kernel/rcu/tree.c:2505 __do_softirq+0x1d3/0x9c6 kernel/softirq.c:571 Last potentially related work creation: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 __kasan_record_aux_stack+0xbe/0xd0 mm/kasan/generic.c:348 call_rcu+0x99/0x790 kernel/rcu/tree.c:2793 qdisc_put+0xcd/0xe0 net/sched/sch_generic.c:1083 notify_and_destroy net/sched/sch_api.c:1012 [inline] qdisc_graft+0xeb1/0x1270 net/sched/sch_api.c:1084 tc_modify_qdisc+0xbb7/0x1a00 net/sched/sch_api.c:1671 rtnetlink_rcv_msg+0x43a/0xca0 net/core/rtnetlink.c:6090 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2482 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2536 __sys_sendmsg+0xf3/0x1c0 net/socket.c:2565 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Second to last potentially related work creation: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 __kasan_record_aux_stack+0xbe/0xd0 mm/kasan/generic.c:348 kvfree_call_rcu+0x74/0x940 kernel/rcu/tree.c:3322 neigh_destroy+0x431/0x630 net/core/neighbour.c:912 neigh_release include/net/neighbour.h:454 [inline] neigh_cleanup_and_release+0x1f8/0x330 net/core/neighbour.c:103 neigh_del net/core/neighbour.c:225 [inline] neigh_remove_one+0x37d/0x460 net/core/neighbour.c:246 neigh_forced_gc net/core/neighbour.c:276 [inline] neigh_alloc net/core/neighbour.c:447 [inline] ___neigh_create+0x18b5/0x29a0 net/core/neighbour.c:642 ip6_finish_output2+0xfb8/0x1520 net/ipv6/ip6_output.c:125 __ip6_finish_output net/ipv6/ip6_output.c:195 [inline] ip6_finish_output+0x690/0x1160 net/ipv6/ip6_output.c:206 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip6_output+0x1ed/0x540 net/ipv6/ip6_output.c:227 dst_output include/net/dst.h:451 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] mld_sendpack+0xa09/0xe70 net/ipv6/mcast.c:1820 mld_send_cr net/ipv6/mcast.c:2121 [inline] mld_ifc_work+0x71c/0xdc0 net/ipv6/mcast.c:2653 process_one_work+0x991/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e4/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 The buggy address belongs to the object at ffff88802065e000 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 56 bytes inside of 1024-byte region [ffff88802065e000, ffff88802065e400) The buggy address belongs to the physical page: page:ffffea0000819600 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x20658 head:ffffea0000819600 order:3 compound_mapcount:0 compound_pincount:0 flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000010200 0000000000000000 dead000000000001 ffff888011841dc0 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 3, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 3523, tgid 3523 (sshd), ts 41495190986, free_ts 41417713212 prep_new_page mm/page_alloc.c:2532 [inline] get_page_from_freelist+0x109b/0x2ce0 mm/page_alloc.c:4283 __alloc_pages+0x1c7/0x510 mm/page_alloc.c:5515 alloc_pages+0x1a6/0x270 mm/mempolicy.c:2270 alloc_slab_page mm/slub.c:1824 [inline] allocate_slab+0x27e/0x3d0 mm/slub.c:1969 new_slab mm/slub.c:2029 [inline] ___slab_alloc+0x7f1/0xe10 mm/slub.c:3031 __slab_alloc.constprop.0+0x4d/0xa0 mm/slub.c:3118 slab_alloc_node mm/slub.c:3209 [inline] __kmalloc_node_track_caller+0x2f2/0x380 mm/slub.c:4955 kmalloc_reserve net/core/skbuff.c:358 [inline] __alloc_skb+0xd9/0x2f0 net/core/skbuff.c:430 alloc_skb_fclone include/linux/skbuff.h:1307 [inline] tcp_stream_alloc_skb+0x38/0x580 net/ipv4/tcp.c:861 tcp_sendmsg_locked+0xc36/0x2f80 net/ipv4/tcp.c:1325 tcp_sendmsg+0x2b/0x40 net/ipv4/tcp.c:1483 inet_sendmsg+0x99/0xe0 net/ipv4/af_inet.c:819 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 sock_write_iter+0x291/0x3d0 net/socket.c:1108 call_write_iter include/linux/fs.h:2187 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x9e9/0xdd0 fs/read_write.c:578 ksys_write+0x1e8/0x250 fs/read_write.c:631 page last free stack trace: reset_page_owner include/linux/page_owner.h:24 [inline] free_pages_prepare mm/page_alloc.c:1449 [inline] free_pcp_prepare+0x5e4/0xd20 mm/page_alloc.c:1499 free_unref_page_prepare mm/page_alloc.c:3380 [inline] free_unref_page+0x19/0x4d0 mm/page_alloc.c:3476 __unfreeze_partials+0x17c/0x1a0 mm/slub.c:2548 qlink_free mm/kasan/quarantine.c:168 [inline] qlist_free_all+0x6a/0x170 mm/kasan/quarantine.c:187 kasan_quarantine_reduce+0x180/0x200 mm/kasan/quarantine.c:294 __kasan_slab_alloc+0xa2/0xc0 mm/kasan/common.c:447 kasan_slab_alloc include/linux/kasan.h:224 [inline] slab_post_alloc_hook mm/slab.h:727 [inline] slab_alloc_node mm/slub.c:3243 [inline] slab_alloc mm/slub.c:3251 [inline] __kmem_cache_alloc_lru mm/slub.c:3258 [inline] kmem_cache_alloc+0x267/0x3b0 mm/slub.c:3268 kmem_cache_zalloc include/linux/slab.h:723 [inline] alloc_buffer_head+0x20/0x140 fs/buffer.c:2974 alloc_page_buffers+0x280/0x790 fs/buffer.c:829 create_empty_buffers+0x2c/0xee0 fs/buffer.c:1558 ext4_block_write_begin+0x1004/0x1530 fs/ext4/inode.c:1074 ext4_da_write_begin+0x422/0xae0 fs/ext4/inode.c:2996 generic_perform_write+0x246/0x560 mm/filemap.c:3738 ext4_buffered_write_iter+0x15b/0x460 fs/ext4/file.c:270 ext4_file_write_iter+0x44a/0x1660 fs/ext4/file.c:679 call_write_iter include/linux/fs.h:2187 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x9e9/0xdd0 fs/read_write.c:578 Fixes: af356afa ("net_sched: reintroduce dev->qdisc for use by sch_api") Reported-by:
syzbot <syzkaller@googlegroups.com> Diagnosed-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20221018203258.2793282-1-edumazet@google.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> [ mheyne: removed rtnl_dereference due to missing commit 5891cd5e ("net_sched: add __rcu annotation to netdev->qdisc") ] Signed-off-by:
Maximilian Heyne <mheyne@amazon.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Matthew Wilcox (Oracle) authored
commit 4595a298 upstream. For filesystems with block size < page size, we need to set all the per-block uptodate bits if the page was already uptodate at the time we create the per-block metadata. This can happen if the page is invalidated (eg by a write to drop_caches) but ultimately not removed from the page cache. This is a data corruption issue as page writeback skips blocks which are marked !uptodate. Fixes: 9dc55f13 ("iomap: add support for sub-pagesize buffered I/O without buffer heads") Signed-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Reported-by:
Qian Cai <cai@redhat.com> Cc: Brian Foster <bfoster@redhat.com> Reviewed-by:
Gao Xiang <hsiangkao@redhat.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Shida Zhang <zhangshida@kylinos.cn> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dongli Zhang authored
commit 1978f30a upstream. When tag_set->nr_maps is 1, the block layer limits the number of hw queues by nr_cpu_ids. No matter how many hw queues are used by virtio-scsi, as it has (tag_set->nr_maps == 1), it can use at most nr_cpu_ids hw queues. In addition, specifically for pci scenario, when the 'num_queues' specified by qemu is more than maxcpus, virtio-scsi would not be able to allocate more than maxcpus vectors in order to have a vector for each queue. As a result, it falls back into MSI-X with one vector for config and one shared for queues. Considering above reasons, this patch limits the number of hw queues used by virtio-scsi by nr_cpu_ids. Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Kunkun Jiang <jiangkunkun@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christian König authored
commit 12f76050 upstream. We should not leak the pointer where we couldn't grab the reference on to the caller because it can be that the error handling still tries to put the reference then. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kemeng Shi authored
commit 40dd7953 upstream. Wrong check of gdb backup in meta bg as following: first_group is the first group of meta_bg which contains target group, so target group is always >= first_group. We check if target group has gdb backup by comparing first_group with [group + 1] and [group + EXT4_DESC_PER_BLOCK(sb) - 1]. As group >= first_group, then [group + N] is > first_group. So no copy of gdb backup in meta bg is done in setup_new_flex_group_blocks. No need to do gdb backup copy in meta bg from setup_new_flex_group_blocks as we always copy updated gdb block to backups at end of ext4_flex_group_add as following: ext4_flex_group_add /* no gdb backup copy for meta bg any more */ setup_new_flex_group_blocks /* update current group number */ ext4_update_super sbi->s_groups_count += flex_gd->count; /* * if group in meta bg contains backup is added, the primary gdb block * of the meta bg will be copy to backup in new added group here. */ for (; gdb_num <= gdb_num_end; gdb_num++) update_backups(...) In summary, we can remove wrong gdb backup copy code in setup_new_flex_group_blocks. Signed-off-by:
Kemeng Shi <shikemeng@huaweicloud.com> Reviewed-by:
Theodore Ts'o <tytso@mit.edu> Link: https://lore.kernel.org/r/20230826174712.4059355-5-shikemeng@huaweicloud.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kemeng Shi authored
commit 48f15515 upstream. Avoid to ignore error in "err". Signed-off-by:
Kemeng Shi <shikemeng@huaweicloud.com> Link: https://lore.kernel.org/r/20230826174712.4059355-4-shikemeng@huaweicloud.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kemeng Shi authored
commit 31f13421 upstream. Commit 0aeaa255 ("ext4: fix corruption when online resizing a 1K bigalloc fs") found that primary superblock's offset in its group is not equal to offset of backup superblock in its group when block size is 1K and bigalloc is enabled. As group descriptor blocks are right after superblock, we can't pass block number of gdb to update_backups for the same reason. The root casue of the issue above is that leading 1K padding block is count as data block offset for primary block while backup block has no padding block offset in its group. Remove padding data block count to fix the issue for gdb backups. For meta_bg case, update_backups treat blk_off as block number, do no conversion in this case. Signed-off-by:
Kemeng Shi <shikemeng@huaweicloud.com> Reviewed-by:
Theodore Ts'o <tytso@mit.edu> Link: https://lore.kernel.org/r/20230826174712.4059355-2-shikemeng@huaweicloud.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Max Kellermann authored
commit 484fd6c1 upstream. The function ext4_init_acl() calls posix_acl_create() which is responsible for applying the umask. But without CONFIG_EXT4_FS_POSIX_ACL, ext4_init_acl() is an empty inline function, and nobody applies the umask. This fixes a bug which causes the umask to be ignored with O_TMPFILE on ext4: https://github.com/MusicPlayerDaemon/MPD/issues/558 https://bugs.gentoo.org/show_bug.cgi?id=686142#c3 https://bugzilla.kernel.org/show_bug.cgi?id=203625 Reviewed-by:
"J. Bruce Fields" <bfields@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Max Kellermann <max.kellermann@ionos.com> Link: https://lore.kernel.org/r/20230919081824.1096619-1-max.kellermann@ionos.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Heiner Kallweit authored
commit 6a263102 upstream. This reverts commit efa5f131 . I couldn't reproduce the reported issue. What I did, based on a pcap packet log provided by the reporter: - Used same chip version (RTL8168h) - Set MAC address to the one used on the reporters system - Replayed the EAPOL unicast packet that, according to the reporter, was filtered out by the mc filter. The packet was properly received. Therefore the root cause of the reported issue seems to be somewhere else. Disabling mc filtering completely for the most common chip version is a quite big hammer. Therefore revert the change and wait for further analysis results from the reporter. Cc: stable@vger.kernel.org Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vikash Garodia authored
commit 8d0b8939 upstream. The hfi parser, parses the capabilities received from venus firmware and copies them to core capabilities. Consider below api, for example, fill_caps - In this api, caps in core structure gets updated with the number of capabilities received in firmware data payload. If the same api is called multiple times, there is a possibility of copying beyond the max allocated size in core caps. Similar possibilities in fill_raw_fmts and fill_profile_level functions. Cc: stable@vger.kernel.org Fixes: 1a73374a ("media: venus: hfi_parser: add common capability parser") Signed-off-by:
Vikash Garodia <quic_vgarodia@quicinc.com> Signed-off-by:
Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vikash Garodia authored
commit b18e36df upstream. Buffer requirement, for different buffer type, comes from video firmware. While copying these requirements, there is an OOB possibility when the payload from firmware is more than expected size. Fix the check to avoid the OOB possibility. Cc: stable@vger.kernel.org Fixes: 09c2845e ("[media] media: venus: hfi: add Host Firmware Interface (HFI)") Reviewed-by:
Nathan Hebert <nhebert@chromium.org> Signed-off-by:
Vikash Garodia <quic_vgarodia@quicinc.com> Signed-off-by:
Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vikash Garodia authored
commit 0768a9dd upstream. Supported codec bitmask is populated from the payload from venus firmware. There is a possible case when all the bits in the codec bitmask is set. In such case, core cap for decoder is filled and MAX_CODEC_NUM is utilized. Now while filling the caps for encoder, it can lead to access the caps array beyong 32 index. Hence leading to OOB write. The fix counts the supported encoder and decoder. If the count is more than max, then it skips accessing the caps. Cc: stable@vger.kernel.org Fixes: 1a73374a ("media: venus: hfi_parser: add common capability parser") Signed-off-by:
Vikash Garodia <quic_vgarodia@quicinc.com> Signed-off-by:
Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sean Young authored
commit 4f7efc71 upstream. The Sharp protocol[1] encoding has incorrect timings for bit space. [1] https://www.sbprojects.net/knowledge/ir/sharp.php Fixes: d35afc5f ("[media] rc: ir-sharp-decoder: Add encode capability") Cc: stable@vger.kernel.org Reported-by:
Joe Ferner <joe.m.ferner@gmail.com> Closes: https://sourceforge.net/p/lirc/mailman/message/38604507/ Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sean Young authored
commit c8a489f8 upstream. When transmitting, infrared drivers expect an odd number of samples; iow without a trailing space. No problems have been observed so far, so this is just belt and braces. Fixes: 9b619258 ("media: lirc: implement scancode sending") Cc: stable@vger.kernel.org Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Heiner Kallweit authored
commit f78ca48a upstream. Currently we set SMBHSTCNT_LAST_BYTE only after the host has started receiving the last byte. If we get e.g. preempted before setting SMBHSTCNT_LAST_BYTE, the host may be finished with receiving the byte before SMBHSTCNT_LAST_BYTE is set. Therefore change the code to set SMBHSTCNT_LAST_BYTE before writing SMBHSTSTS_BYTE_DONE for the byte before the last byte. Now the code is also consistent with what we do in i801_isr_byte_done(). Reported-by:
Jean Delvare <jdelvare@suse.com> Closes: https://lore.kernel.org/linux-i2c/20230828152747.09444625@endymion.delvare/ Cc: stable@vger.kernel.org Acked-by:
Andi Shyti <andi.shyti@kernel.org> Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Sverdlin authored
commit 5a22fbcc upstream. When LAN9303 is MDIO-connected two callchains exist into mdio->bus->write(): 1. switch ports 1&2 ("physical" PHYs): virtual (switch-internal) MDIO bus (lan9303_switch_ops->phy_{read|write})-> lan9303_mdio_phy_{read|write} -> mdiobus_{read|write}_nested 2. LAN9303 virtual PHY: virtual MDIO bus (lan9303_phy_{read|write}) -> lan9303_virt_phy_reg_{read|write} -> regmap -> lan9303_mdio_{read|write} If the latter functions just take mutex_lock(&sw_dev->device->bus->mdio_lock) it triggers a LOCKDEP false-positive splat. It's false-positive because the first mdio_lock in the second callchain above belongs to virtual MDIO bus, the second mdio_lock belongs to physical MDIO bus. Consequent annotation in lan9303_mdio_{read|write} as nested lock (similar to lan9303_mdio_phy_{read|write}, it's the same physical MDIO bus) prevents the following splat: WARNING: possible circular locking dependency detected 5.15.71 #1 Not tainted ------------------------------------------------------ kworker/u4:3/609 is trying to acquire lock: ffff000011531c68 (lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock){+.+.}-{3:3}, at: regmap_lock_mutex but task is already holding lock: ffff0000114c44d8 (&bus->mdio_lock){+.+.}-{3:3}, at: mdiobus_read which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&bus->mdio_lock){+.+.}-{3:3}: lock_acquire __mutex_lock mutex_lock_nested lan9303_mdio_read _regmap_read regmap_read lan9303_probe lan9303_mdio_probe mdio_probe really_probe __driver_probe_device driver_probe_device __device_attach_driver bus_for_each_drv __device_attach device_initial_probe bus_probe_device deferred_probe_work_func process_one_work worker_thread kthread ret_from_fork -> #0 (lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock){+.+.}-{3:3}: __lock_acquire lock_acquire.part.0 lock_acquire __mutex_lock mutex_lock_nested regmap_lock_mutex regmap_read lan9303_phy_read dsa_slave_phy_read __mdiobus_read mdiobus_read get_phy_device mdiobus_scan __mdiobus_register dsa_register_switch lan9303_probe lan9303_mdio_probe mdio_probe really_probe __driver_probe_device driver_probe_device __device_attach_driver bus_for_each_drv __device_attach device_initial_probe bus_probe_device deferred_probe_work_func process_one_work worker_thread kthread ret_from_fork other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&bus->mdio_lock); lock(lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock); lock(&bus->mdio_lock); lock(lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock); *** DEADLOCK *** 5 locks held by kworker/u4:3/609: #0: ffff000002842938 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work #1: ffff80000bacbd60 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work #2: ffff000007645178 (&dev->mutex){....}-{3:3}, at: __device_attach #3: ffff8000096e6e78 (dsa2_mutex){+.+.}-{3:3}, at: dsa_register_switch #4: ffff0000114c44d8 (&bus->mdio_lock){+.+.}-{3:3}, at: mdiobus_read stack backtrace: CPU: 1 PID: 609 Comm: kworker/u4:3 Not tainted 5.15.71 #1 Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace show_stack dump_stack_lvl dump_stack print_circular_bug check_noncircular __lock_acquire lock_acquire.part.0 lock_acquire __mutex_lock mutex_lock_nested regmap_lock_mutex regmap_read lan9303_phy_read dsa_slave_phy_read __mdiobus_read mdiobus_read get_phy_device mdiobus_scan __mdiobus_register dsa_register_switch lan9303_probe lan9303_mdio_probe ... Cc: stable@vger.kernel.org Fixes: dc700583 ("net: dsa: LAN9303: add MDIO managed mode support") Signed-off-by:
Alexander Sverdlin <alexander.sverdlin@siemens.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20231027065741.534971-1-alexander.sverdlin@siemens.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pavel Krasavin authored
[ Upstream commit 2a1d728f ] There might be hard lockup if we set crtscts mode on port without RTS/CTS configured: # stty -F /dev/ttyAML6 crtscts; echo 1 > /dev/ttyAML6; echo 2 > /dev/ttyAML6 [ 95.890386] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 95.890857] rcu: 3-...0: (201 ticks this GP) idle=e33c/1/0x4000000000000000 softirq=5844/5846 fqs=4984 [ 95.900212] rcu: (detected by 2, t=21016 jiffies, g=7753, q=296 ncpus=4) [ 95.906972] Task dump for CPU 3: [ 95.910178] task:bash state:R running task stack:0 pid:205 ppid:1 flags:0x00000202 [ 95.920059] Call trace: [ 95.922485] __switch_to+0xe4/0x168 [ 95.925951] 0xffffff8003477508 [ 95.974379] watchdog: Watchdog detected hard LOCKUP on cpu 3 [ 95.974424] Modules linked in: 88x2cs(O) rtc_meson_vrtc Possible solution would be to not allow to setup crtscts on such port. Tested on S905X3 based board. Fixes: ff7693d0 ("ARM: meson: serial: add MesonX SoC on-chip uart driver") Cc: stable@vger.kernel.org Signed-off-by:
Pavel Krasavin <pkrasavin@imaqliq.com> Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by:
Dmitry Rokosov <ddrokosov@salutedevices.com> v6: stable tag added v5: https://lore.kernel.org/lkml/OF43DA36FF.2BD3BB21-ON00258A47.005A8125-00258A47.005A9513@gdc.ru/ added missed Reviewed-by tags, Fixes tag added according to Dmitry and Neil notes v4: https://lore.kernel.org/lkml/OF55521400.7512350F-ON00258A47.003F7254-00258A47.0040E15C@gdc.ru/ More correct patch subject according to Jiri's note v3: https://lore.kernel.org/lkml/OF6CF5FFA0.CCFD0E8E-ON00258A46.00549EDF-00258A46.0054BB62@gdc.ru/ "From:" line added to the mail v2: https://lore.kernel.org/lkml/OF950BEF72.7F425944-ON00258A46.00488A76-00258A46.00497D44@gdc.ru/ braces for single statement removed according to Dmitry's note v1: https://lore.kernel.org/lkml/OF28B2B8C9.5BC0CD28-ON00258A46.0037688F-00258A46.0039155B@gdc.ru/ Link: https://lore.kernel.org/r/OF66360032.51C36182-ON00258A48.003F656B-00258A48.0040092C@gdc.ru Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Lad Prabhakar authored
[ Upstream commit 5b680619 ] platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20211224142917.6966-5-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 2a1d728f ("tty: serial: meson: fix hard LOCKUP on crtscts mode") Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Neil Armstrong authored
[ Upstream commit 27d44e05 ] Now the DT bindings has a property to get the FIFO size for a particular port, retrieve it and use to setup the FIFO interrupts threshold. Reviewed-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20210518075833.3736038-3-narmstrong@baylibre.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 2a1d728f ("tty: serial: meson: fix hard LOCKUP on crtscts mode") Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Colin Ian King authored
[ Upstream commit 021212f5 ] The variable id being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Since id is just being used in a for-loop inside a local scope, move the declaration of id to that scope. Reviewed-by:
Kevin Hilman <khilman@baylibre.com> Reviewed-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
Colin Ian King <colin.king@canonical.com> Addresses-Coverity: ("Unused value") Link: https://lore.kernel.org/r/20210426101106.9122-1-colin.king@canonical.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 2a1d728f ("tty: serial: meson: fix hard LOCKUP on crtscts mode") Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Loys Ollivier authored
[ Upstream commit a26988e8 ] At probe, the uart driver tries to get an id from a device tree alias. When no alias was specified, the driver would return an error and probing would fail. Providing an alias for registering a serial device should not be mandatory. If the device tree does not specify an alias, provide an id from a reserved range so that the probing can continue. Suggested-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Loys Ollivier <lollivier@baylibre.com> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 2a1d728f ("tty: serial: meson: fix hard LOCKUP on crtscts mode") Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Chandradeep Dey authored
commit 713f040c upstream. Apply the already existing quirk chain ALC294_FIXUP_ASUS_SPK to enable the internal speaker of ASUS K6500ZC. Signed-off-by:
Chandradeep Dey <codesigning@chandradeepdey.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/NizcVHQ--3-9@chandradeepdey.com Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit c7a60651 upstream. As reported recently, ALSA core info helper may cause a deadlock at the forced device disconnection during the procfs operation. The proc_remove() (that is called from the snd_card_disconnect() helper) has a synchronization of the pending procfs accesses via wait_for_completion(). Meanwhile, ALSA procfs helper takes the global mutex_lock(&info_mutex) at both the proc_open callback and snd_card_info_disconnect() helper. Since the proc_open can't finish due to the mutex lock, wait_for_completion() never returns, either, hence it deadlocks. TASK#1 TASK#2 proc_reg_open() takes use_pde() snd_info_text_entry_open() snd_card_disconnect() snd_info_card_disconnect() takes mutex_lock(&info_mutex) proc_remove() wait_for_completion(unused_pde) ... waiting task#1 closes mutex_lock(&info_mutex) => DEADLOCK This patch is a workaround for avoiding the deadlock scenario above. The basic strategy is to move proc_remove() call outside the mutex lock. proc_remove() can work gracefully without extra locking, and it can delete the tree recursively alone. So, we call proc_remove() at snd_info_card_disconnection() at first, then delete the rest resources recursively within the info_mutex lock. After the change, the function snd_info_disconnect() doesn't do disconnection by itself any longer, but it merely clears the procfs pointer. So rename the function to snd_info_clear_entries() for avoiding confusion. The similar change is applied to snd_info_free_entry(), too. Since the proc_remove() is called only conditionally with the non-NULL entry->p, it's skipped after the snd_info_clear_entries() call. Reported-by:
Shinhyung Kang <s47.kang@samsung.com> Closes: https://lore.kernel.org/r/664457955.21699345385931.JavaMail.epsvc@epcpadp4 Reviewed-by:
Jaroslav Kysela <perex@perex.cz> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20231109141954.4283-1-tiwai@suse.de Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Helge Deller authored
commit 166b0110 upstream. When calculating the pfn for the iitlbt/idtlbt instruction, do not drop the upper 5 address bits. This doesn't seem to have an effect on physical hardware which uses less physical address bits, but in qemu the missing bits are visible. Signed-off-by:
Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-