- Oct 16, 2021
-
-
Frieder Schrempf authored
The MCP2515 can be used with an SPI clock of up to 10 MHz. Set the limit accordingly to prevent any performance issues caused by the really low clock speed of 100 kHz. This removes the arbitrarily low limit on the SPI frequency, that was caused by a typo in the original dts. Without this change, receiving CAN messages on the board beyond a certain bitrate will cause overrun errors (see 'ip -det -stat link show can0'). With this fix, receiving messages on the bus works without any overrun errors for bitrates up to 1 MBit. Fixes: 8668d8b2 ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards") Cc: stable@vger.kernel.org Signed-off-by:
Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by:
Shawn Guo <shawnguo@kernel.org>
-
Frieder Schrempf authored
The regulator reg_rst_eth2 should keep the reset signal of the USB ethernet adapter deasserted anytime. Fix the polarity and mark it as always-on. Anyway, using the regulator is only a workaround for the missing support of specifying a reset GPIO for USB devices in a generic way. As we don't have a solution for this at the moment, at least fix the current workaround. Fixes: 8668d8b2 ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards") Cc: stable@vger.kernel.org Signed-off-by:
Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by:
Shawn Guo <shawnguo@kernel.org>
-
Frieder Schrempf authored
According to the datasheet the typical value for VDD_SNVS should be 800 mV, so let's make sure that this is within the range of the regulator. Fixes: 8668d8b2 ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards") Cc: stable@vger.kernel.org Signed-off-by:
Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by:
Shawn Guo <shawnguo@kernel.org>
-
Frieder Schrempf authored
It looks like the voltages for the SOC and DRAM supply weren't properly validated before. The datasheet and uboot-imx code tells us that VDD_SOC should be 800 mV in suspend and 850 mV in run mode. VDD_DRAM should be 950 mV for DDR clock frequencies of up to 1.5 GHz. Let's fix these values to make sure the voltages are within the required range. Fixes: 8668d8b2 ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards") Cc: stable@vger.kernel.org Signed-off-by:
Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by:
Shawn Guo <shawnguo@kernel.org>
-
- Oct 15, 2021
-
-
Philipp Zabel authored
Starting with commit 6b2117ad ("of: property: fw_devlink: Add support for "resets" and "pwms""), the imx-drm driver fails to load due to forever dormant devlinks to the reset-controller node. This node was never associated with a struct device. Add a platform device to allow fw_devnode to activate the devlinks. Fixes: 6b2117ad ("of: property: fw_devlink: Add support for "resets" and "pwms"") Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Tested-by:
Fabio Estevam <festevam@gmail.com> Reviewed-by:
Saravana Kannan <saravanak@google.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org>
-
- Oct 05, 2021
-
-
Tim Harvey authored
Fix invalid M2_RST# gpio pinmux. Fixes: ef484dfc ("arm64: dts: imx: Add i.mx8mm/imx8mn Gateworks gw7902 dts support") Cc: stable@vger.kernel.org Signed-off-by:
Tim Harvey <tharvey@gateworks.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org>
-
Oleksij Rempel authored
Any pending interrupt can prevent entering standby based power off state. To avoid it, disable the GIC CPU interface. Fixes: 8148d213 ("ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" is set") Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
Shawn Guo <shawnguo@kernel.org>
-
- Oct 04, 2021
-
-
Michael Walle authored
On the LS1028A this instance of the eSDHC controller is intended for either an eMMC or eSDIO card. It doesn't provide a card detect pin and its IO voltage is fixed at 1.8V. Remove the bogus broken-cd property, instead add the non-removable property. Fix the voltage-ranges property and set it to 1.8V only. Fixes: 491d3a3f ("arm64: dts: ls1028a: Add esdhc node in dts") Signed-off-by:
Michael Walle <michael@walle.cc> Signed-off-by:
Shawn Guo <shawnguo@kernel.org>
-
Heiko Thiery authored
The buck2 output of the PMIC is the VDD core voltage of the cpu. Switching off this will poweroff the CPU. Add the 'regulator-always-on' property to avoid this. Fixes: 8668d8b2 ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards") Signed-off-by:
Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by:
Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by:
Shawn Guo <shawnguo@kernel.org>
-
Haibo Chen authored
Before commit 0e30f472 ("mtd: spi-nor: add support for DTR protocol"), for all PP command, it only support 1-1-1 mode, no matter the tx setting in dts. But after the upper commit, the logic change. It will choose the best mode(fastest mode) which flash device and spi-nor host controller both support. qspi and fspi host controller do not support read 1-4-4 mode. so need to set the tx to 1, let the common code finally select read 1-1-4 mode. Signed-off-by:
Haibo Chen <haibo.chen@nxp.com> Fixes: 0e30f472 ("mtd: spi-nor: add support for DTR protocol") Signed-off-by:
Shawn Guo <shawnguo@kernel.org>
-
Haibo Chen authored
Before commit 0e30f472 ("mtd: spi-nor: add support for DTR protocol"), for all PP command, it only support 1-1-1 mode, no matter the tx setting in dts. But after the upper commit, the logic change. It will choose the best mode(fastest mode) which flash device and spi-nor host controller both support. Though the spi-nor device on imx6sx-sdb/imx6ul(l/z)-14x14-evk board do not support PP-1-4-4/PP-1-1-4, but if tx is 4 in dts file, it will also impact the read mode selection. For the spi-nor device on the upper mentioned boards, they support read 1-4-4 mode and read 1-1-4 mode according to the device internal sfdp register. But qspi host controller do not support read 1-4-4 mode. so need to set the tx to 1, let the common code finally select read 1-1-4 mode, PP-1-1-1 mode. Signed-off-by:
Haibo Chen <haibo.chen@nxp.com> Fixes: 0e30f472 ("mtd: spi-nor: add support for DTR protocol") Signed-off-by:
Shawn Guo <shawnguo@kernel.org>
-
- Sep 22, 2021
-
-
Marcel Ziswiler authored
Enable CONFIG_FB which is nowadays required for CONFIG_DRM_PANEL_LVDS, CONFIG_DRM_PANEL_SIMPLE, CONFIG_DRM_PANEL_SEIKO_43WVF1G, CONFIG_FB_MODE_HELPERS, CONFIG_BACKLIGHT_PWM, CONFIG_BACKLIGHT_GPIO, CONFIG_FRAMEBUFFER_CONSOLE, CONFIG_LOGO, CONFIG_FONTS, CONFIG_FONT_8x8 and CONFIG_FONT_8x16. Fixes: f611b1e7 ("drm: Avoid circular dependencies for CONFIG_FB") Reviewed-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
Currently, it is no longer possible to retrieve a DHCP address on the imx6qdl-pico board. This issue has been exposed by commit f5d9aa79 ("ARM: imx6q: remove clk-out fixup for the Atheros AR8031 and AR8035 PHYs"). Fix it by describing the qca,clk-out-frequency property as suggested by the commit above. Fixes: 98670a0b ("ARM: dts: imx6qdl: Add imx6qdl-pico support") Signed-off-by:
Fabio Estevam <festevam@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Shawn Guo <shawnguo@kernel.org>
-
Marek Vasut authored
The MIC2025 switch input signal nEN is active low, describe it as such in the DT. The previous change to this regulator polarity was incorrectly influenced by broken quirks in gpiolib-of.c, which is now long fixed. So fix this regulator polarity setting here once and for all. Fixes: 3c3601cd ("ARM: dts: imx53: Update USB configuration on M53Menlo") Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org>
-
Marek Vasut authored
The panel already contains pinctrl-0 phandle, but it is missing the default pinctrl-names property, so the pin configuration is ignored. Fill in the missing pinctrl-names property, so the pin configuration is applied. Fixes: d81765d6 ("ARM: dts: imx53: Update LCD panel node on M53Menlo") Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
This reverts commit cc8870bf. Since commit cc8870bf ("ARM: imx6q: drop of_platform_default_populate() from init_machine") the following errors are seen on boot: [ 0.123372] imx6q_suspend_init: failed to find ocram device! [ 0.123537] imx6_pm_common_init: No DDR LPM support with suspend -19! , which break suspend/resume on imx6q/dl. Revert the offeding commit to avoid the regression. Thanks to Tim Harvey for bisecting this problem. Cc: stable@vger.kernel.org Fixes: cc8870bf ("ARM: imx6q: drop of_platform_default_populate() from init_machine") Signed-off-by:
Fabio Estevam <festevam@gmail.com> Acked-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
Shawn Guo <shawnguo@kernel.org>
-
Michal Vokáč authored
Since the LED multicolor framework support was added in commit 92a81562 ("leds: lp55xx: Add multicolor framework support to lp55xx") LEDs on this platform stopped working. Author of the framework attempted to accommodate this DT to the framework in commit b86d3d21 ("ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 channel node") but that is not sufficient. A color property is now required even if the multicolor framework is not used, otherwise the driver probe fails: lp5562: probe of 1-0030 failed with error -22 Add the color property to fix this. Fixes: 92a81562 ("leds: lp55xx: Add multicolor framework support to lp55xx") Cc: <stable@vger.kernel.org> Cc: linux-leds@vger.kernel.org Signed-off-by:
Michal Vokáč <michal.vokac@ysoft.com> Acked-by:
Pavel Machek <pavel@ucw.cz> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org>
-
- Sep 13, 2021
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Add missing fields and remove some duplicate fields when printing a perf_event_attr. - Fix hybrid config terms list corruption. - Update kernel header copies, some resulted in new kernel features being automagically added to 'perf trace' syscall/tracepoint argument id->string translators. - Add a file generated during the documentation build to .gitignore. - Add an option to build without libbfd, as some distros, like Debian consider its ABI unstable. - Add support to print a textual representation of IBS raw sample data in 'perf report'. - Fix bpf 'perf test' sample mismatch reporting - Fix passing arguments to stackcollapse report in a 'perf script' python script. - Allow build-id with trailing zeros. - Look for ImageBase in PE file to compute .text offset. * tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (25 commits) tools headers UAPI: Update tools's copy of drm.h headers tools headers UAPI: Sync drm/i915_drm.h with the kernel sources tools headers UAPI: Sync linux/fs.h with the kernel sources tools headers UAPI: Sync linux/in.h copy with the kernel sources perf tools: Add an option to build without libbfd perf tools: Allow build-id with trailing zeros perf tools: Fix hybrid config terms list corruption perf tools: Factor out copy_config_terms() and free_config_terms() perf tools: Fix perf_event_attr__fprintf() missing/dupl. fields perf tools: Ignore Documentation dependency file perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions tools include UAPI: Update linux/mount.h copy perf beauty: Cover more flags in the move_mount syscall argument beautifier tools headers UAPI: Sync linux/prctl.h with the kernel sources tools include UAPI: Sync sound/asound.h copy with the kernel sources tools headers UAPI: Sync linux/kvm.h with the kernel sources tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources perf report: Add support to print a textual representation of IBS raw sample data perf report: Add tools/arch/x86/include/asm/amd-ibs.h perf env: Add perf_env__cpuid, perf_env__{nr_}pmu_mappings ...
-
git://github.com/ojeda/linuxLinus Torvalds authored
Pull compiler attributes updates from Miguel Ojeda: - Fix __has_attribute(__no_sanitize_coverage__) for GCC 4 (Marco Elver) - Add Nick as Reviewer for compiler_attributes.h (Nick Desaulniers) - Move __compiletime_{error|warning} (Nick Desaulniers) * tag 'compiler-attributes-for-linus-v5.15-rc1-v2' of git://github.com/ojeda/linux: compiler_attributes.h: move __compiletime_{error|warning} MAINTAINERS: add Nick as Reviewer for compiler_attributes.h Compiler Attributes: fix __has_attribute(__no_sanitize_coverage__) for GCC 4
-
git://github.com/ojeda/linuxLinus Torvalds authored
Pull auxdisplay updates from Miguel Ojeda: "An assortment of improvements for auxdisplay: - Replace symbolic permissions with octal permissions (Jinchao Wang) - ks0108: Switch to use module_parport_driver() (Andy Shevchenko) - charlcd: Drop unneeded initializers and switch to C99 style (Andy Shevchenko) - hd44780: Fix oops on module unloading (Lars Poeschel) - Add I2C gpio expander example (Ralf Schlatterbeck)" * tag 'auxdisplay-for-linus-v5.15-rc1' of git://github.com/ojeda/linux: auxdisplay: Replace symbolic permissions with octal permissions auxdisplay: ks0108: Switch to use module_parport_driver() auxdisplay: charlcd: Drop unneeded initializers and switch to C99 style auxdisplay: hd44780: Fix oops on module unloading auxdisplay: Add I2C gpio expander example
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull CPU hotplug updates from Thomas Gleixner: "Updates for the SMP and CPU hotplug: - Remove DEFINE_SMP_CALL_CACHE_FUNCTION() which is a left over of the original hotplug code and now causing trouble with the ARM64 cache topology setup due to the pointless SMP function call. It's not longer required as the hotplug callbacks are guaranteed to be invoked on the upcoming CPU. - Remove the deprecated and now unused CPU hotplug functions - Rewrite the CPU hotplug API documentation" * tag 'smp-urgent-2021-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation: core-api/cpuhotplug: Rewrite the API section cpu/hotplug: Remove deprecated CPU-hotplug functions. thermal: Replace deprecated CPU-hotplug functions. drivers: base: cacheinfo: Get rid of DEFINE_SMP_CALL_CACHE_FUNCTION()
-
Linus Torvalds authored
Merge tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull misc driver fix from Greg KH: "Here is a single patch for 5.15-rc1, for the lkdtm misc driver. It resolves a build issue that many people were hitting with your current tree, and Kees and others felt would be good to get merged before -rc1 comes out, to prevent them from having to constantly hit it as many development trees restart on -rc1, not older -rc releases. It has NOT been in linux-next, but has passed 0-day testing and looks 'obviously correct' when reviewing it locally :)" * tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: lkdtm: Use init_uts_ns.name instead of macros
-
git://github.com/cminyard/linux-ipmiLinus Torvalds authored
Pull IPMI updates from Corey Minyard: "A couple of very minor fixes for style and rate limiting. Nothing big, but probably needs to go in" * tag 'for-linus-5.15-1' of git://github.com/cminyard/linux-ipmi: char: ipmi: use DEVICE_ATTR helper macro ipmi: rate limit ipmi smi_event failure message
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Borislav Petkov: - Make sure the idle timer expires in hardirq context, on PREEMPT_RT - Make sure the run-queue balance callback is invoked only on the outgoing CPU * tag 'sched_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Prevent balance_push() on remote runqueues sched/idle: Make the idle timer expire in hard interrupt context
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Borislav Petkov: - Fix the futex PI requeue machinery to not return to userspace in inconsistent state - Avoid a potential null pointer dereference in the ww_mutex deadlock check - Other smaller cleanups and optimizations * tag 'locking_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/rtmutex: Fix ww_mutex deadlock check futex: Remove unused variable 'vpid' in futex_proxy_trylock_atomic() futex: Avoid redundant task lookup futex: Clarify comment for requeue_pi_wake_futex() futex: Prevent inconsistent state and exit race futex: Return error code instead of assigning it without effect locking/rwsem: Add missing __init_rwsem() for PREEMPT_RT
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Borislav Petkov: - Handle negative second values properly when converting a timespec64 to nanoseconds. * tag 'timers_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time: Handle negative seconds correctly in timespec64_to_ns()
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull namei updates from Al Viro: "Clearing fallout from mkdirat in io_uring series. The fix in the kern_path_locked() patch plus associated cleanups" * 'misc.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: putname(): IS_ERR_OR_NULL() is wrong here namei: Standardize callers of filename_create() namei: Standardize callers of filename_lookup() rename __filename_parentat() to filename_parentat() namei: Fix use after free in kern_path_locked
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull smbfs updates from Steve French: "cifs/smb3 updates: - DFS reconnect fix - begin creating common headers for server and client - rename the cifs_common directory to smbfs_common to be more consistent ie change use of the name cifs to smb (smb3 or smbfs is more accurate, as the very old cifs dialect has long been superseded by smb3 dialects). In the future we can rename the fs/cifs directory to fs/smbfs. This does not include the set of multichannel fixes nor the two deferred close fixes (they are still being reviewed and tested)" * tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: properly invalidate cached root handle when closing it cifs: move SMB FSCTL definitions to common code cifs: rename cifs_common to smbfs_common cifs: update FSCTL definitions
-
- Sep 12, 2021
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio updates from Michael Tsirkin: - vduse driver ("vDPA Device in Userspace") supporting emulated virtio block devices - virtio-vsock support for end of record with SEQPACKET - vdpa: mac and mq support for ifcvf and mlx5 - vdpa: management netlink for ifcvf - virtio-i2c, gpio dt bindings - misc fixes and cleanups * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (39 commits) Documentation: Add documentation for VDUSE vduse: Introduce VDUSE - vDPA Device in Userspace vduse: Implement an MMU-based software IOTLB vdpa: Support transferring virtual addressing during DMA mapping vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap() vdpa: Add an opaque pointer for vdpa_config_ops.dma_map() vhost-iotlb: Add an opaque pointer for vhost IOTLB vhost-vdpa: Handle the failure of vdpa_reset() vdpa: Add reset callback in vdpa_config_ops vdpa: Fix some coding style issues file: Export receive_fd() to modules eventfd: Export eventfd_wake_count to modules iova: Export alloc_iova_fast() and free_iova_fast() virtio-blk: remove unneeded "likely" statements virtio-balloon: Use virtio_find_vqs() helper vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro vsock_test: update message bounds test for MSG_EOR af_vsock: rename variables in receive loop virtio/vsock: support MSG_EOR bit processing vhost/vsock: support MSG_EOR bit processing ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull more RISC-V updates from Palmer Dabbelt: - A pair of defconfig additions, for NVMe and the EFI filesystem localization options. - A larger address space for stack randomization. - A cleanup to our install rules. - A DTS update for the Microchip Icicle board, to fix the serial console. - Support for build-time table sorting, which allows us to have __ex_table read-only. * tag 'riscv-for-linus-5.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Move EXCEPTION_TABLE to RO_DATA segment riscv: Enable BUILDTIME_TABLE_SORT riscv: dts: microchip: mpfs-icicle: Fix serial console riscv: move the (z)install rules to arch/riscv/Makefile riscv: Improve stack randomisation on RV64 riscv: defconfig: enable NLS_CODEPAGE_437, NLS_ISO8859_1 riscv: defconfig: enable BLK_DEV_NVME
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linuxLinus Torvalds authored
Pull coccinelle updates from Julia Lawall: "These changes update some existing semantic patches with respect to some recent changes in the kernel. Specifically, the change to kvmalloc.cocci searches for kfree_sensitive rather than kzfree, and the change to use_after_iter.cocci adds list_entry_is_head as a valid use of a list iterator index variable after the end of the loop" * 'for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux: scripts: coccinelle: allow list_entry_is_head() to use pos coccinelle: api: rename kzfree to kfree_sensitive
-
Arnaldo Carvalho de Melo authored
Picking the changes from: 17ce9c61 ("drm: document DRM_IOCTL_MODE_RMFB") Doesn't result in any tooling changes: $ tools/perf/trace/beauty/drm_ioctl.sh > before $ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h $ tools/perf/trace/beauty/drm_ioctl.sh > after $ diff -u before after Silencing these perf build warnings: Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h' diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h Cc: Simon Ser <contact@emersion.fr> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
To pick the changes in: b65a9489 ("drm/i915/userptr: Probe existence of backing struct pages upon creation") ee242ca7 ("drm/i915/guc: Implement GuC priority management") 81340cf3 ("drm/i915/uapi: reject set_domain for discrete") 7961c5b6 ("drm/i915: Add TTM offset argument to mmap.") aef7b67a ("drm/i915/uapi: convert drm_i915_gem_userptr to kernel doc") e7737b67 ("drm/i915/uapi: reject caching ioctls for discrete") 3aa8c57f ("drm/i915/uapi: convert drm_i915_gem_set_domain to kernel doc") 289f5a72 ("drm/i915/uapi: convert drm_i915_gem_caching to kernel doc") 4a766ae4 ("drm/i915: Drop the CONTEXT_CLONE API (v2)") 6ff6d61d ("drm/i915: Drop I915_CONTEXT_PARAM_NO_ZEROMAP") fe4751c3 ("drm/i915: Drop I915_CONTEXT_PARAM_RINGSIZE") 57772953 ("drm/i915: Document the Virtual Engine uAPI") c649432e ("drm/i915: Fix busy ioctl commentary") That doesn't result in any changes to tooling as no new ioctl were added (at least not perceived by tools/perf/trace/beauty/drm_ioctl.sh). Addressing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h' diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
To pick the change in: 7957d93b ("block: add ioctl to read the disk sequence number") It adds a new ioctl, but we are still not using that to generate tables for 'perf trace', so no changes in tooling. This silences this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h' diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h Cc: Jens Axboe <axboe@kernel.dk> Cc: Matteo Croce <mcroce@microsoft.com> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
To pick the changes in: db243b79 ("net/ipv4/ipv6: Replace one-element arraya with flexible-array members") 2d3e5caf ("net/ipv4: Replace one-element array with flexible-array member") That don't result in any change in tooling, the structs changed remains with the same layout. This addresses this build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h' diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h Cc: David S. Miller <davem@davemloft.net> Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Ian Rogers authored
Some distributions, like debian, don't link perf with libbfd. Add a build flag to make this configuration buildable and testable. This was inspired by: https://lore.kernel.org/linux-perf-users/20210910102307.2055484-1-tonyg@leastfixedpoint.com/T/#u Signed-off-by:
Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: tony garnock-jones <tonyg@leastfixedpoint.com> Link: http://lore.kernel.org/lkml/20210910225756.729087-1-irogers@google.com Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Namhyung Kim authored
Currently perf saves a build-id with size but old versions assumes the size of 20. In case the build-id is less than 20 (like for MD5), it'd fill the rest with 0s. I saw a problem when old version of perf record saved a binary in the build-id cache and new version of perf reads the data. The symbols should be read from the build-id cache (as the path no longer has the same binary) but it failed due to mismatch in the build-id. symsrc__init: build id mismatch for /home/namhyung/.debug/.build-id/53/e4c2f42a4c61a2d632d92a72afa08f00000000/elf. The build-id event in the data has 20 byte build-ids, but it saw a different size (16) when it reads the build-id of the elf file in the build-id cache. $ readelf -n ~/.debug/.build-id/53/e4c2f42a4c61a2d632d92a72afa08f00000000/elf Displaying notes found in: .note.gnu.build-id Owner Data size Description GNU 0x00000010 NT_GNU_BUILD_ID (unique build ID bitstring) Build ID: 53e4c2f42a4c61a2d632d92a72afa08f Let's fix this by allowing trailing zeros if the size is different. Fixes: 39be8d01 ("perf tools: Pass build_id object to dso__build_id_equal()") Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Acked-by:
Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210910224630.1084877-1-namhyung@kernel.org Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Adrian Hunter authored
A config terms list was spliced twice, resulting in a never-ending loop when the list was traversed. Fix by using list_splice_init() and copying and freeing the lists as necessary. This patch also depends on patch "perf tools: Factor out copy_config_terms() and free_config_terms()" Example on ADL: Before: # perf record -e '{intel_pt//,cycles/aux-sample-size=4096/pp}' uname & # jobs [1]+ Running perf record -e "{intel_pt//,cycles/aux-sample-size=4096/pp}" uname # perf top -E 10 PerfTop: 4071 irqs/sec kernel: 6.9% exact: 100.0% lost: 0/0 drop: 0/0 [4000Hz cycles], (all, 24 CPUs) --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 97.60% perf [.] __evsel__get_config_term 0.25% [kernel] [k] kallsyms_expand_symbol.constprop.13 0.24% perf [.] kallsyms__parse 0.15% [kernel] [k] _raw_spin_lock 0.14% [kernel] [k] number 0.13% [kernel] [k] advance_transaction 0.08% [kernel] [k] format_decode 0.08% perf [.] map__process_kallsym_symbol 0.08% perf [.] rb_insert_color 0.08% [kernel] [k] vsnprintf exiting. # kill %1 After: # perf record -e '{intel_pt//,cycles/aux-sample-size=4096/pp}' uname & Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.060 MB perf.data ] # perf script | head perf-exec 604 [001] 1827.312293: psb: psb offs: 0 ffffffffb8415e87 pt_config_start+0x37 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb856a3bd event_sched_in.isra.133+0xfd ([kernel.kallsyms]) => ffffffffb856a9a0 perf_pmu_nop_void+0x0 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb856b10e merge_sched_in+0x26e ([kernel.kallsyms]) => ffffffffb856a2c0 event_sched_in.isra.133+0x0 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb856a45d event_sched_in.isra.133+0x19d ([kernel.kallsyms]) => ffffffffb8568b80 perf_event_set_state.part.61+0x0 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb8568b86 perf_event_set_state.part.61+0x6 ([kernel.kallsyms]) => ffffffffb85662a0 perf_event_update_time+0x0 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb856a35c event_sched_in.isra.133+0x9c ([kernel.kallsyms]) => ffffffffb8567610 perf_log_itrace_start+0x0 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb856a377 event_sched_in.isra.133+0xb7 ([kernel.kallsyms]) => ffffffffb8403b40 x86_pmu_add+0x0 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb8403b86 x86_pmu_add+0x46 ([kernel.kallsyms]) => ffffffffb8403940 collect_events+0x0 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb8403a7b collect_events+0x13b ([kernel.kallsyms]) => ffffffffb8402cd0 collect_event+0x0 ([kernel.kallsyms]) Fixes: 30def61f ("perf parse-events Create two hybrid cache events") Fixes: 94da591b ("perf parse-events Create two hybrid raw events") Fixes: 9cbfa2f6 ("perf parse-events Create two hybrid hardware events") Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Acked-by:
Jiri Olsa <jolsa@redhat.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Link: https //lore.kernel.org/r/20210909125508.28693-3-adrian.hunter@intel.com Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Adrian Hunter authored
Factor out copy_config_terms() and free_config_terms() so that they can be reused. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Acked-by:
Jiri Olsa <jolsa@redhat.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Link: https //lore.kernel.org/r/20210909125508.28693-2-adrian.hunter@intel.com Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-