- Feb 02, 2022
-
-
Eric Dumazet authored
[ Upstream commit 970a5a3e ] In commit 431280ee ("ipv4: tcp: send zero IPID for RST and ACK sent in SYN-RECV and TIME-WAIT state") we took care of some ctl packets sent by TCP. It turns out we need to use a similar strategy for SYNACK packets. By default, they carry IP_DF and IPID==0, but there are ways to ask them to use the hashed IP ident generator and thus be used to build off-path attacks. (Ref: Off-Path TCP Exploits of the Mixed IPID Assignment) One of this way is to force (before listener is started) echo 1 >/proc/sys/net/ipv4/ip_no_pmtu_disc Another way is using forged ICMP ICMP_FRAG_NEEDED with a very small MTU (like 68) to force a false return from ip_dont_fragment() In this patch, ip_build_and_send_pkt() uses the following heuristics. 1) Most SYNACK packets are smaller than IPV4_MIN_MTU and therefore can use IP_DF regardless of the listener or route pmtu setting. 2) In case the SYNACK packet is bigger than IPV4_MIN_MTU, we use prandom_u32() generator instead of the IPv4 hashed ident one. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Ray Che <xijiache@gmail.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Cc: Geoff Alexander <alexandg@cs.unm.edu> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Eric Dumazet authored
[ Upstream commit 153a0d18 ] For some reason, raw_bind() forgot to lock the socket. BUG: KCSAN: data-race in __ip4_datagram_connect / raw_bind write to 0xffff8881170d4308 of 4 bytes by task 5466 on cpu 0: raw_bind+0x1b0/0x250 net/ipv4/raw.c:739 inet_bind+0x56/0xa0 net/ipv4/af_inet.c:443 __sys_bind+0x14b/0x1b0 net/socket.c:1697 __do_sys_bind net/socket.c:1708 [inline] __se_sys_bind net/socket.c:1706 [inline] __x64_sys_bind+0x3d/0x50 net/socket.c:1706 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff8881170d4308 of 4 bytes by task 5468 on cpu 1: __ip4_datagram_connect+0xb7/0x7b0 net/ipv4/datagram.c:39 ip4_datagram_connect+0x2a/0x40 net/ipv4/datagram.c:89 inet_dgram_connect+0x107/0x190 net/ipv4/af_inet.c:576 __sys_connect_file net/socket.c:1900 [inline] __sys_connect+0x197/0x1b0 net/socket.c:1917 __do_sys_connect net/socket.c:1927 [inline] __se_sys_connect net/socket.c:1924 [inline] __x64_sys_connect+0x3d/0x50 net/socket.c:1924 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000000 -> 0x0003007f Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 5468 Comm: syz-executor.5 Not tainted 5.17.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yufeng Mo authored
[ Upstream commit 2f61353c ] Since some interrupt states may be cleared by hardware, the driver may receive an empty interrupt. Currently, the VF driver directly disables the vector0 interrupt in this case. As a result, the VF is unavailable. Therefore, the vector0 interrupt should be enabled in this case. Fixes: b90fcc5b ("net: hns3: add reset handling for VF when doing Core/Global/IMP reset") Signed-off-by:
Yufeng Mo <moyufeng@huawei.com> Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Hangyu Hua authored
[ Upstream commit 29eb3154 ] ym needs to be free when ym->cmd != SIOCYAMSMCS. Fixes: 0781168e ("yam: fix a missing-check bug") Signed-off-by:
Hangyu Hua <hbh25y@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Miaoqian Lin authored
[ Upstream commit 774fe0cd ] The reference taken by 'of_find_device_by_node()' must be released when not needed anymore. Add the corresponding 'put_device()' in the error handling path. Fixes: e00012b2 ("drm/msm/hdmi: Make HDMI core get its PHY") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220107085026.23831-1-linmq006@gmail.com Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Sukadev Bhattiprolu authored
[ Upstream commit 48079e7f ] ibmvnic_tasklet() continuously spins waiting for responses to all capability requests. It does this to avoid encountering an error during initialization of the vnic. However if there is a bug in the VIOS and we do not receive a response to one or more queries the tasklet ends up spinning continuously leading to hard lock ups. If we fail to receive a message from the VIOS it is reasonable to timeout the login attempt rather than spin indefinitely in the tasklet. Fixes: 249168ad ("ibmvnic: Make CRQ interrupt tasklet wait for all capabilities crqs") Signed-off-by:
Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by:
Dany Madden <drt@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Sukadev Bhattiprolu authored
[ Upstream commit 151b6a5c ] We use ->running_cap_crqs to determine when the ibmvnic_tasklet() should send out the next protocol message type. i.e when we get back responses to all our QUERY_CAPABILITY CRQs we send out REQUEST_CAPABILITY crqs. Similiary, when we get responses to all the REQUEST_CAPABILITY crqs, we send out the QUERY_IP_OFFLOAD CRQ. We currently increment ->running_cap_crqs as we send out each CRQ and have the ibmvnic_tasklet() send out the next message type, when this running_cap_crqs count drops to 0. This assumes that all the CRQs of the current type were sent out before the count drops to 0. However it is possible that we send out say 6 CRQs, get preempted and receive all the 6 responses before we send out the remaining CRQs. This can result in ->running_cap_crqs count dropping to zero before all messages of the current type were sent and we end up sending the next protocol message too early. Instead initialize the ->running_cap_crqs upfront so the tasklet will only send the next protocol message after all responses are received. Use the cap_reqs local variable to also detect any discrepancy (either now or in future) in the number of capability requests we actually send. Currently only send_query_cap() is affected by this behavior (of sending next message early) since it is called from the worker thread (during reset) and from application thread (during ->ndo_open()) and they can be preempted. send_request_cap() is only called from the tasklet which processes CRQ responses sequentially, is not be affected. But to maintain the existing symmtery with send_query_capability() we update send_request_capability() also. Fixes: 249168ad ("ibmvnic: Make CRQ interrupt tasklet wait for all capabilities crqs") Signed-off-by:
Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by:
Dany Madden <drt@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Guenter Roeck authored
[ Upstream commit a53fff96 ] Experiments with MAX6654 show that its alert function is broken, similar to other chips supported by the lm90 driver. Mark it accordingly. Fixes: 229d495d ("hwmon: (lm90) Add max6654 support to lm90 driver") Cc: Josh Lehan <krellan@google.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
David Howells authored
[ Upstream commit 2c13c05c ] Improve retransmission backoff by only backing off when we retransmit data packets rather than when we set the lost ack timer. To this end: (1) In rxrpc_resend(), use rxrpc_get_rto_backoff() when setting the retransmission timer and only tell it that we are retransmitting if we actually have things to retransmit. Note that it's possible for the retransmission algorithm to race with the processing of a received ACK, so we may see no packets needing retransmission. (2) In rxrpc_send_data_packet(), don't bump the backoff when setting the ack_lost_at timer, as it may then get bumped twice. With this, when looking at one particular packet, the retransmission intervals were seen to be 1.5ms, 2ms, 3ms, 5ms, 9ms, 17ms, 33ms, 71ms, 136ms, 264ms, 544ms, 1.088s, 2.1s, 4.2s and 8.3s. Fixes: c410bf01 ("rxrpc: Fix the excessive initial retransmission timeout") Suggested-by:
Marc Dionne <marc.dionne@auristor.com> Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
Marc Dionne <marc.dionne@auristor.com> Tested-by:
Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/164138117069.2023386.17446904856843997127.stgit@warthog.procyon.org.uk/ Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Marek Behún authored
[ Upstream commit cbda1b16 ] Commit bafbdd52 ("phylib: Add device reset GPIO support") added call to phy_device_reset(phydev) after the put_device() call in phy_detach(). The comment before the put_device() call says that the phydev might go away with put_device(). Fix potential use-after-free by calling phy_device_reset() before put_device(). Fixes: bafbdd52 ("phylib: Add device reset GPIO support") Signed-off-by:
Marek Behún <kabel@kernel.org> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220119162748.32418-1-kabel@kernel.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Robert Hancock authored
[ Upstream commit d15c7e87 ] A problem was encountered with the Bel-Fuse 1GBT-SFP05 SFP module (which is a 1 Gbps copper module operating in SGMII mode with an internal BCM54616S PHY device) using the Xilinx AXI Ethernet MAC core, where the module would work properly on the initial insertion or boot of the device, but after the device was rebooted, the link would either only come up at 100 Mbps speeds or go up and down erratically. I found no meaningful changes in the PHY configuration registers between the working and non-working boots, but the status registers seemed to have a lot of error indications set on the SERDES side of the device on the non-working boot. I suspect the problem is that whatever happens on the SGMII link when the device is rebooted and the FPGA logic gets reloaded ends up putting the module's onboard PHY into a bad state. Since commit 6e2d85ec ("net: phy: Stop with excessive soft reset") the genphy_soft_reset call is not made automatically by the PHY core unless the callback is explicitly specified in the driver structure. For most of these Broadcom devices, there is probably a hardware reset that gets asserted to reset the PHY during boot, however for SFP modules (where the BCM54616S is commonly found) no such reset line exists, so if the board keeps the SFP cage powered up across a reboot, it will end up with no reset occurring during reboots. Hook up the genphy_soft_reset callback for BCM54616S to ensure that a PHY reset is performed before the device is initialized. This appears to fix the issue with erratic operation after a reboot with this SFP module. Fixes: 6e2d85ec ("net: phy: Stop with excessive soft reset") Signed-off-by:
Robert Hancock <robert.hancock@calian.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Florian Westphal authored
[ Upstream commit 830af2eb ] The packet isn't invalid, REPEAT means we're trying again after cleaning out a stale connection, e.g. via tcp tracker. This caused increases of invalid stat counter in a test case involving frequent connection reuse, even though no packet is actually invalid. Fixes: 56a62e22 ("netfilter: conntrack: fix NF_REPEAT handling") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Trond Myklebust authored
[ Upstream commit 6ff9d99b ] Renaming a file is required by POSIX to update the file ctime, so ensure that the file data is synced to disk so that we don't clobber the updated ctime by writing back after creating the hard link. Fixes: f2c2c552 ("NFS: Move delegation recall into the NFSv4 callback for rename_setup()") Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Trond Myklebust authored
[ Upstream commit 20497503 ] Creating a hard link is required by POSIX to update the file ctime, so ensure that the file data is synced to disk so that we don't clobber the updated ctime by writing back after creating the hard link. Fixes: 9f768272 ("NFS: Move the delegation return down into nfs4_proc_link()") Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Eric Dumazet authored
commit aafc2e32 upstream. struct fib6_node's fn_sernum field can be read while other threads change it. Add READ_ONCE()/WRITE_ONCE() annotations. Do not change existing smp barriers in fib6_get_cookie_safe() and __fib6_update_sernum_upto_root() syzbot reported: BUG: KCSAN: data-race in fib6_clean_node / inet6_csk_route_socket write to 0xffff88813df62e2c of 4 bytes by task 1920 on cpu 1: fib6_clean_node+0xc2/0x260 net/ipv6/ip6_fib.c:2178 fib6_walk_continue+0x38e/0x430 net/ipv6/ip6_fib.c:2112 fib6_walk net/ipv6/ip6_fib.c:2160 [inline] fib6_clean_tree net/ipv6/ip6_fib.c:2240 [inline] __fib6_clean_all+0x1a9/0x2e0 net/ipv6/ip6_fib.c:2256 fib6_flush_trees+0x6c/0x80 net/ipv6/ip6_fib.c:2281 rt_genid_bump_ipv6 include/net/net_namespace.h:488 [inline] addrconf_dad_completed+0x57f/0x870 net/ipv6/addrconf.c:4230 addrconf_dad_work+0x908/0x1170 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 worker_thread+0x616/0xa70 kernel/workqueue.c:2454 kthread+0x1bf/0x1e0 kernel/kthread.c:359 ret_from_fork+0x1f/0x30 read to 0xffff88813df62e2c of 4 bytes by task 15701 on cpu 0: fib6_get_cookie_safe include/net/ip6_fib.h:285 [inline] rt6_get_cookie include/net/ip6_fib.h:306 [inline] ip6_dst_store include/net/ip6_route.h:234 [inline] inet6_csk_route_socket+0x352/0x3c0 net/ipv6/inet6_connection_sock.c:109 inet6_csk_xmit+0x91/0x1e0 net/ipv6/inet6_connection_sock.c:121 __tcp_transmit_skb+0x1323/0x1840 net/ipv4/tcp_output.c:1402 tcp_transmit_skb net/ipv4/tcp_output.c:1420 [inline] tcp_write_xmit+0x1450/0x4460 net/ipv4/tcp_output.c:2680 __tcp_push_pending_frames+0x68/0x1c0 net/ipv4/tcp_output.c:2864 tcp_push+0x2d9/0x2f0 net/ipv4/tcp.c:725 mptcp_push_release net/mptcp/protocol.c:1491 [inline] __mptcp_push_pending+0x46c/0x490 net/mptcp/protocol.c:1578 mptcp_sendmsg+0x9ec/0xa50 net/mptcp/protocol.c:1764 inet6_sendmsg+0x5f/0x80 net/ipv6/af_inet6.c:643 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] kernel_sendmsg+0x97/0xd0 net/socket.c:745 sock_no_sendpage+0x84/0xb0 net/core/sock.c:3086 inet_sendpage+0x9d/0xc0 net/ipv4/af_inet.c:834 kernel_sendpage+0x187/0x200 net/socket.c:3492 sock_sendpage+0x5a/0x70 net/socket.c:1007 pipe_to_sendpage+0x128/0x160 fs/splice.c:364 splice_from_pipe_feed fs/splice.c:418 [inline] __splice_from_pipe+0x207/0x500 fs/splice.c:562 splice_from_pipe fs/splice.c:597 [inline] generic_splice_sendpage+0x94/0xd0 fs/splice.c:746 do_splice_from fs/splice.c:767 [inline] direct_splice_actor+0x80/0xa0 fs/splice.c:936 splice_direct_to_actor+0x345/0x650 fs/splice.c:891 do_splice_direct+0x106/0x190 fs/splice.c:979 do_sendfile+0x675/0xc40 fs/read_write.c:1245 __do_sys_sendfile64 fs/read_write.c:1310 [inline] __se_sys_sendfile64 fs/read_write.c:1296 [inline] __x64_sys_sendfile64+0x102/0x140 fs/read_write.c:1296 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x0000026f -> 0x00000271 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 15701 Comm: syz-executor.2 Not tainted 5.16.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 The Fixes tag I chose is probably arbitrary, I do not think we need to backport this patch to older kernels. Fixes: c5cff856 ("ipv6: add rcu grace period before freeing fib6_node") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20220120174112.1126644-1-eric.dumazet@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
José Expósito authored
commit 5e761a22 upstream. The function performs a check on the "phy" input parameter, however, it is used before the check. Initialize the "dev" variable after the sanity check to avoid a possible NULL pointer dereference. Fixes: 5c829028 ("drm/msm/dsi: Split PHY drivers to separate files") Addresses-Coverity-ID: 1493860 ("Null pointer dereference") Signed-off-by:
José Expósito <jose.exposito89@gmail.com> Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220116181844.7400-1-jose.exposito89@gmail.com Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Miaoqian Lin authored
commit c04c3148 upstream. If of_find_device_by_node() succeeds, dsi_get_phy() doesn't a corresponding put_device(). Thus add put_device() to fix the exception handling. Fixes: ec31abf6 ("drm/msm/dsi: Separate PHY to another platform device") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20211230070943.18116-1-linmq006@gmail.com Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xianting Tian authored
commit 0a727b45 upstream. For example, memory-region in .dts as below, reg = <0x0 0x50000000 0x0 0x20000000> We can get below values, struct resource r; r.start = 0x50000000; r.end = 0x6fffffff; So the size should be: size = r.end - r.start + 1 = 0x20000000 Signed-off-by:
Xianting Tian <xianting.tian@linux.alibaba.com> Fixes: 072f1f91 ("drm/msm: add support for "stolen" mem") Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220112123334.749776-1-xianting.tian@linux.alibaba.com Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jianguo Wu authored
commit 1d10f8a1 upstream. After commit:7866a621 ("dev: add per net_device packet type chains"), we can not get packet types that are bound to a specified net device by /proc/net/ptype, this patch fix the regression. Run "tcpdump -i ens192 udp -nns0" Before and after apply this patch: Before: [root@localhost ~]# cat /proc/net/ptype Type Device Function 0800 ip_rcv 0806 arp_rcv 86dd ipv6_rcv After: [root@localhost ~]# cat /proc/net/ptype Type Device Function ALL ens192 tpacket_rcv 0800 ip_rcv 0806 arp_rcv 86dd ipv6_rcv v1 -> v2: - fix the regression rather than adding new /proc API as suggested by Stephen Hemminger. Fixes: 7866a621 ("dev: add per net_device packet type chains") Signed-off-by:
Jianguo Wu <wujianguo@chinatelecom.cn> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Trond Myklebust authored
commit 1751fc1d upstream. If the file type changes back to being a regular file on the server between the failed OPEN and our LOOKUP, then we need to re-run the OPEN. Fixes: 0dd2b474 ("nfs: implement i_op->atomic_open()") Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Trond Myklebust authored
commit ac795161 upstream. If the application sets the O_DIRECTORY flag, and tries to open a regular file, nfs_atomic_open() will punt to doing a regular lookup. If the server then returns a regular file, we will happily return a file descriptor with uninitialised open state. The fix is to return the expected ENOTDIR error in these cases. Reported-by:
Lyu Tao <tao.lyu@epfl.ch> Fixes: 0dd2b474 ("nfs: implement i_op->atomic_open()") Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Guenter Roeck authored
[ Upstream commit a66c5ed5 ] According to its datasheet, G781 supports a maximum conversion rate value of 8 (62.5 ms). However, chips labeled G781 and G780 were found to only support a maximum conversion rate value of 7 (125 ms). On the other side, chips labeled G781-1 and G784 were found to support a conversion rate value of 8. There is no known means to distinguish G780 from G781 or G784; all chips report the same manufacturer ID and chip revision. Setting the conversion rate register value to 8 on chips not supporting it causes unexpected behavior since the real conversion rate is set to 0 (16 seconds) if a value of 8 is written into the conversion rate register. Limit the conversion rate register value to 7 for all G78x chips to avoid the problem. Fixes: ae544f64 ("hwmon: (lm90) Add support for GMT G781") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Eric Dumazet authored
commit 23f57406 upstream. ip_select_ident_segs() has been very conservative about using the connected socket private generator only for packets with IP_DF set, claiming it was needed for some VJ compression implementations. As mentioned in this referenced document, this can be abused. (Ref: Off-Path TCP Exploits of the Mixed IPID Assignment) Before switching to pure random IPID generation and possibly hurt some workloads, lets use the private inet socket generator. Not only this will remove one vulnerability, this will also improve performance of TCP flows using pmtudisc==IP_PMTUDISC_DONT Fixes: 73f156a6 ("inetpeer: get rid of ip_id_count") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Reported-by:
Ray Che <xijiache@gmail.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xin Long authored
commit 2afc3b5a upstream. When 'ping' changes to use PING socket instead of RAW socket by: # sysctl -w net.ipv4.ping_group_range="0 100" the selftests 'router_broadcast.sh' will fail, as such command # ip vrf exec vrf-h1 ping -I veth0 198.51.100.255 -b can't receive the response skb by the PING socket. It's caused by mismatch of sk_bound_dev_if and dif in ping_rcv() when looking up the PING socket, as dif is vrf-h1 if dif's master was set to vrf-h1. This patch is to fix this regression by also checking the sk_bound_dev_if against sdif so that the packets can stil be received even if the socket is not bound to the vrf device but to the real iif. Fixes: c319b4d7 ("net: ipv4: add IPPROTO_ICMP socket kind") Reported-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Guenter Roeck authored
commit 94746b0b upstream. Experiments with MAX6680 and MAX6681 show that the alert function of those chips is broken, similar to other chips supported by the lm90 driver. Mark it accordingly. Fixes: 4667bcb8 ("hwmon: (lm90) Introduce chip parameter structure") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Guenter Roeck authored
commit f614629f upstream. Experiments with MAX6646 and MAX6648 show that the alert function of those chips is broken, similar to other chips supported by the lm90 driver. Mark it accordingly. Fixes: 4667bcb8 ("hwmon: (lm90) Introduce chip parameter structure") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Congyu Liu authored
commit 47934e06 upstream. In one net namespace, after creating a packet socket without binding it to a device, users in other net namespaces can observe the new `packet_type` added by this packet socket by reading `/proc/net/ptype` file. This is minor information leakage as packet socket is namespace aware. Add a net pointer in `packet_type` to keep the net namespace of of corresponding packet socket. In `ptype_seq_show`, this net pointer must be checked when it is not NULL. Fixes: 2feb27db ("[NETNS]: Minor information leak via /proc/net/ptype file.") Signed-off-by:
Congyu Liu <liu3101@purdue.edu> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ido Schimmel authored
commit 6cee105e upstream. The warning messages can be invoked from the data path for every packet transmitted through an ip6gre netdev, leading to high CPU utilization. Fix that by rate limiting the messages. Fixes: 09c6bbf0 ("[IPV6]: Do mandatory IPv6 tunnel endpoint checks in realtime") Reported-by:
Maksym Yaremchuk <maksymy@nvidia.com> Tested-by:
Maksym Yaremchuk <maksymy@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Amit Cohen <amcohen@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
John Meneghini authored
commit 847f9ea4 upstream. The bnx2fc_destroy() functions are removing the interface before calling destroy_work. This results multiple WARNings from sysfs_remove_group() as the controller rport device attributes are removed too early. Replace the fcoe_port's destroy_work queue. It's not needed. The problem is easily reproducible with the following steps. Example: $ dmesg -w & $ systemctl enable --now fcoe $ fipvlan -s -c ens2f1 $ fcoeadm -d ens2f1.802 [ 583.464488] host2: libfc: Link down on port (7500a1) [ 583.472651] bnx2fc: 7500a1 - rport not created Yet!! [ 583.490468] ------------[ cut here ]------------ [ 583.538725] sysfs group 'power' not found for kobject 'rport-2:0-0' [ 583.568814] WARNING: CPU: 3 PID: 192 at fs/sysfs/group.c:279 sysfs_remove_group+0x6f/0x80 [ 583.607130] Modules linked in: dm_service_time 8021q garp mrp stp llc bnx2fc cnic uio rpcsec_gss_krb5 auth_rpcgss nfsv4 ... [ 583.942994] CPU: 3 PID: 192 Comm: kworker/3:2 Kdump: loaded Not tainted 5.14.0-39.el9.x86_64 #1 [ 583.984105] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013 [ 584.016535] Workqueue: fc_wq_2 fc_rport_final_delete [scsi_transport_fc] [ 584.050691] RIP: 0010:sysfs_remove_group+0x6f/0x80 [ 584.074725] Code: ff 5b 48 89 ef 5d 41 5c e9 ee c0 ff ff 48 89 ef e8 f6 b8 ff ff eb d1 49 8b 14 24 48 8b 33 48 c7 c7 ... [ 584.162586] RSP: 0018:ffffb567c15afdc0 EFLAGS: 00010282 [ 584.188225] RAX: 0000000000000000 RBX: ffffffff8eec4220 RCX: 0000000000000000 [ 584.221053] RDX: ffff8c1586ce84c0 RSI: ffff8c1586cd7cc0 RDI: ffff8c1586cd7cc0 [ 584.255089] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffb567c15afc00 [ 584.287954] R10: ffffb567c15afbf8 R11: ffffffff8fbe7f28 R12: ffff8c1486326400 [ 584.322356] R13: ffff8c1486326480 R14: ffff8c1483a4a000 R15: 0000000000000004 [ 584.355379] FS: 0000000000000000(0000) GS:ffff8c1586cc0000(0000) knlGS:0000000000000000 [ 584.394419] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 584.421123] CR2: 00007fe95a6f7840 CR3: 0000000107674002 CR4: 00000000000606e0 [ 584.454888] Call Trace: [ 584.466108] device_del+0xb2/0x3e0 [ 584.481701] device_unregister+0x13/0x60 [ 584.501306] bsg_unregister_queue+0x5b/0x80 [ 584.522029] bsg_remove_queue+0x1c/0x40 [ 584.541884] fc_rport_final_delete+0xf3/0x1d0 [scsi_transport_fc] [ 584.573823] process_one_work+0x1e3/0x3b0 [ 584.592396] worker_thread+0x50/0x3b0 [ 584.609256] ? rescuer_thread+0x370/0x370 [ 584.628877] kthread+0x149/0x170 [ 584.643673] ? set_kthread_struct+0x40/0x40 [ 584.662909] ret_from_fork+0x22/0x30 [ 584.680002] ---[ end trace 53575ecefa942ece ]--- Link: https://lore.kernel.org/r/20220115040044.1013475-1-jmeneghi@redhat.com Fixes: 0cbf32e1 ("[SCSI] bnx2fc: Avoid calling bnx2fc_if_destroy with unnecessary locks") Tested-by:
Guangwu Zhang <guazhang@redhat.com> Co-developed-by:
Maurizio Lombardi <mlombard@redhat.com> Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Signed-off-by:
John Meneghini <jmeneghi@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Matthias Kaehlcke authored
commit 7a534ae8 upstream. struct rpmsg_eptdev contains a struct cdev. The current code frees the rpmsg_eptdev struct in rpmsg_eptdev_destroy(), but the cdev is a managed object, therefore its release is not predictable and the rpmsg_eptdev could be freed before the cdev is entirely released. The cdev_device_add/del() API was created to address this issue (see commit '233ed09d ("chardev: add helper function to register char devs with a struct device")'), use it instead of cdev add/del(). Fixes: c0cdc19f ("rpmsg: Driver for user space endpoint interface") Suggested-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220110104706.v6.2.Idde68b05b88d4a2e6e54766c653f3a6d9e419ce6@changeid Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sujit Kautkar authored
commit b7fb2dad upstream. struct rpmsg_ctrldev contains a struct cdev. The current code frees the rpmsg_ctrldev struct in rpmsg_ctrldev_release_device(), but the cdev is a managed object, therefore its release is not predictable and the rpmsg_ctrldev could be freed before the cdev is entirely released, as in the backtrace below. [ 93.625603] ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x7c [ 93.636115] WARNING: CPU: 0 PID: 12 at lib/debugobjects.c:488 debug_print_object+0x13c/0x1b0 [ 93.644799] Modules linked in: veth xt_cgroup xt_MASQUERADE rfcomm algif_hash algif_skcipher af_alg uinput ip6table_nat fuse uvcvideo videobuf2_vmalloc venus_enc venus_dec videobuf2_dma_contig hci_uart btandroid btqca snd_soc_rt5682_i2c bluetooth qcom_spmi_temp_alarm snd_soc_rt5682v [ 93.715175] CPU: 0 PID: 12 Comm: kworker/0:1 Tainted: G B 5.4.163-lockdep #26 [ 93.723855] Hardware name: Google Lazor (rev3 - 8) with LTE (DT) [ 93.730055] Workqueue: events kobject_delayed_cleanup [ 93.735271] pstate: 60c00009 (nZCv daif +PAN +UAO) [ 93.740216] pc : debug_print_object+0x13c/0x1b0 [ 93.744890] lr : debug_print_object+0x13c/0x1b0 [ 93.749555] sp : ffffffacf5bc7940 [ 93.752978] x29: ffffffacf5bc7940 x28: dfffffd000000000 [ 93.758448] x27: ffffffacdb11a800 x26: dfffffd000000000 [ 93.763916] x25: ffffffd0734f856c x24: dfffffd000000000 [ 93.769389] x23: 0000000000000000 x22: ffffffd0733c35b0 [ 93.774860] x21: ffffffd0751994a0 x20: ffffffd075ec27c0 [ 93.780338] x19: ffffffd075199100 x18: 00000000000276e0 [ 93.785814] x17: 0000000000000000 x16: dfffffd000000000 [ 93.791291] x15: ffffffffffffffff x14: 6e6968207473696c [ 93.796768] x13: 0000000000000000 x12: ffffffd075e2b000 [ 93.802244] x11: 0000000000000001 x10: 0000000000000000 [ 93.807723] x9 : d13400dff1921900 x8 : d13400dff1921900 [ 93.813200] x7 : 0000000000000000 x6 : 0000000000000000 [ 93.818676] x5 : 0000000000000080 x4 : 0000000000000000 [ 93.824152] x3 : ffffffd0732a0fa4 x2 : 0000000000000001 [ 93.829628] x1 : ffffffacf5bc7580 x0 : 0000000000000061 [ 93.835104] Call trace: [ 93.837644] debug_print_object+0x13c/0x1b0 [ 93.841963] __debug_check_no_obj_freed+0x25c/0x3c0 [ 93.846987] debug_check_no_obj_freed+0x18/0x20 [ 93.851669] slab_free_freelist_hook+0xbc/0x1e4 [ 93.856346] kfree+0xfc/0x2f4 [ 93.859416] rpmsg_ctrldev_release_device+0x78/0xb8 [ 93.864445] device_release+0x84/0x168 [ 93.868310] kobject_cleanup+0x12c/0x298 [ 93.872356] kobject_delayed_cleanup+0x10/0x18 [ 93.876948] process_one_work+0x578/0x92c [ 93.881086] worker_thread+0x804/0xcf8 [ 93.884963] kthread+0x2a8/0x314 [ 93.888303] ret_from_fork+0x10/0x18 The cdev_device_add/del() API was created to address this issue (see commit '233ed09d ("chardev: add helper function to register char devs with a struct device")'), use it instead of cdev add/del(). Fixes: c0cdc19f ("rpmsg: Driver for user space endpoint interface") Signed-off-by:
Sujit Kautkar <sujitka@chromium.org> Signed-off-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220110104706.v6.1.Iaac908f3e3149a89190ce006ba166e2d3fd247a3@changeid Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Joe Damato authored
commit 3b8428b8 upstream. Change i40e_update_vsi_stats and struct i40e_vsi to use u64 fields to match the width of the stats counters in struct i40e_rx_queue_stats. Update debugfs code to use the correct format specifier for u64. Fixes: 41c445ff ("i40e: main driver core") Signed-off-by:
Joe Damato <jdamato@fastly.com> Reported-by:
kernel test robot <lkp@intel.com> Tested-by:
Gurucharan G <gurucharanx.g@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sylwester Dziedziuch authored
commit 92947844 upstream. When XDP was configured on a system with large number of CPUs and X722 NIC there was a call trace with NULL pointer dereference. i40e 0000:87:00.0: failed to get tracking for 256 queues for VSI 0 err -12 i40e 0000:87:00.0: setup of MAIN VSI failed BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:i40e_xdp+0xea/0x1b0 [i40e] Call Trace: ? i40e_reconfig_rss_queues+0x130/0x130 [i40e] dev_xdp_install+0x61/0xe0 dev_xdp_attach+0x18a/0x4c0 dev_change_xdp_fd+0x1e6/0x220 do_setlink+0x616/0x1030 ? ahci_port_stop+0x80/0x80 ? ata_qc_issue+0x107/0x1e0 ? lock_timer_base+0x61/0x80 ? __mod_timer+0x202/0x380 rtnl_setlink+0xe5/0x170 ? bpf_lsm_binder_transaction+0x10/0x10 ? security_capable+0x36/0x50 rtnetlink_rcv_msg+0x121/0x350 ? rtnl_calcit.isra.0+0x100/0x100 netlink_rcv_skb+0x50/0xf0 netlink_unicast+0x1d3/0x2a0 netlink_sendmsg+0x22a/0x440 sock_sendmsg+0x5e/0x60 __sys_sendto+0xf0/0x160 ? __sys_getsockname+0x7e/0xc0 ? _copy_from_user+0x3c/0x80 ? __sys_setsockopt+0xc8/0x1a0 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f83fa7a39e0 This was caused by PF queue pile fragmentation due to flow director VSI queue being placed right after main VSI. Because of this main VSI was not able to resize its queue allocation for XDP resulting in no queues allocated for main VSI when XDP was turned on. Fix this by always allocating last queue in PF queue pile for a flow director VSI. Fixes: 41c445ff ("i40e: main driver core") Fixes: 74608d17 ("i40e: add support for XDP_TX action") Signed-off-by:
Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by:
Mateusz Palczewski <mateusz.palczewski@intel.com> Reviewed-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by:
Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jedrzej Jagielski authored
commit d701658a upstream. Before this patch VF interface vanished when maximum queue number was exceeded. Driver tried to add next queues even if there was not enough space. PF sent incorrect number of queues to the VF when there were not enough of them. Add an additional condition introduced to check available space in 'qp_pile' before proceeding. This condition makes it impossible to add queues if they number is greater than the number resulting from available space. Also add the search for free space in PF queue pair piles. Without this patch VF interfaces are not seen when available space for queues has been exceeded and following logs appears permanently in dmesg: "Unable to get VF config (-32)". "VF 62 failed opcode 3, retval: -5" "Unable to get VF config due to PF error condition, not retrying" Fixes: 7daa6bf3 ("i40e: driver core headers") Fixes: 41c445ff ("i40e: main driver core") Signed-off-by:
Jaroslaw Gawin <jaroslawx.gawin@intel.com> Signed-off-by:
Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by:
Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by:
Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jedrzej Jagielski authored
commit 9b13bd53 upstream. Recently simplified i40e_rebuild causes that FW sometimes is not ready after NVM update, the ping does not return. Increase the delay in case of EMP reset. Old delay of 300 ms was introduced for specific cards for 710 series. Now it works for all the cards and delay was increased. Fixes: 1fa51a65 ("i40e: Add delay after EMP reset for firmware to recover") Signed-off-by:
Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by:
Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by:
Gurucharan G <gurucharanx.g@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christophe Leroy authored
commit bba49665 upstream. Boot fails with GCC latent entropy plugin enabled. This is due to early boot functions trying to access 'latent_entropy' global data while the kernel is not relocated at its final destination yet. As there is no way to tell GCC to use PTRRELOC() to access it, disable latent entropy plugin in early_32.o and feature-fixups.o and code-patching.o Fixes: 38addce8 ("gcc-plugins: Add latent_entropy plugin") Cc: stable@vger.kernel.org # v4.9+ Reported-by:
Erhard Furtner <erhard_f@mailbox.org> Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://bugzilla.kernel.org/show_bug.cgi?id=215217 Link: https://lore.kernel.org/r/2bac55483b8daf5b1caa163a45fa5f9cdbe18be4.1640178426.git.christophe.leroy@csgroup.eu Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marek Behún authored
commit 2148927e upstream. Commit ce0aa27f ("sfp: add sfp-bus to bridge between network devices and sfp cages") added code which finds SFP bus DT node even if the node is disabled with status = "disabled". Because of this, when phylink is created, it ends with non-null .sfp_bus member, even though the SFP module is not probed (because the node is disabled). We need to ignore disabled SFP bus node. Fixes: ce0aa27f ("sfp: add sfp-bus to bridge between network devices and sfp cages") Signed-off-by:
Marek Behún <kabel@kernel.org> Cc: stable@vger.kernel.org # 2203cbf2 ("net: sfp: move fwnode parsing into sfp-bus layer") Signed-off-by:
David S. Miller <davem@davemloft.net> [ backport to 5.4 ] Signed-off-by:
Marek Behún <kabel@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sing-Han Chen authored
commit 82591149 upstream. CCGx clears Bit 0:Device Interrupt in the INTR_REG if CCGx is reset successfully. However, there might be a chance that other bits in INTR_REG are not cleared due to internal data queued in PPM. This case misleads the driver that CCGx reset failed. The commit checks bit 0 in INTR_REG and ignores other bits. The ucsi driver would reset PPM later. Fixes: 247c554a ("usb: typec: ucsi: add support for Cypress CCGx") Cc: stable@vger.kernel.org Reviewed-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
Sing-Han Chen <singhanc@nvidia.com> Signed-off-by:
Wayne Chang <waynec@nvidia.com> Link: https://lore.kernel.org/r/20220112094143.628610-1-waynec@nvidia.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Badhri Jagan Sridharan authored
commit 90b8aa9f upstream. With some chargers, vbus might momentarily raise above VSAFE5V and fall back to 0V before tcpm gets to read port->tcpc->get_vbus. This will will report a VBUS off event causing TCPM to transition to SNK_UNATTACHED where it should be waiting in either SNK_ATTACH_WAIT or SNK_DEBOUNCED state. This patch makes TCPM avoid vbus off events while in SNK_ATTACH_WAIT or SNK_DEBOUNCED state. Stub from the spec: "4.5.2.2.4.2 Exiting from AttachWait.SNK State A Sink shall transition to Unattached.SNK when the state of both the CC1 and CC2 pins is SNK.Open for at least tPDDebounce. A DRP shall transition to Unattached.SRC when the state of both the CC1 and CC2 pins is SNK.Open for at least tPDDebounce." [23.194131] CC1: 0 -> 0, CC2: 0 -> 5 [state SNK_UNATTACHED, polarity 0, connected] [23.201777] state change SNK_UNATTACHED -> SNK_ATTACH_WAIT [rev3 NONE_AMS] [23.209949] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS] [23.300579] VBUS off [23.300668] state change SNK_ATTACH_WAIT -> SNK_UNATTACHED [rev3 NONE_AMS] [23.301014] VBUS VSAFE0V [23.301111] Start toggling Fixes: f0690a25 ("staging: typec: USB Type-C Port Manager (tcpm)") Cc: stable@vger.kernel.org Acked-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20220122015520.332507-1-badhri@google.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alan Stern authored
commit 26fbe977 upstream. The syzbot fuzzer has identified a bug in which processes hang waiting for usb_kill_urb() to return. It turns out the issue is not unlinking the URB; that works just fine. Rather, the problem arises when the wakeup notification that the URB has completed is not received. The reason is memory-access ordering on SMP systems. In outline form, usb_kill_urb() and __usb_hcd_giveback_urb() operating concurrently on different CPUs perform the following actions: CPU 0 CPU 1 ---------------------------- --------------------------------- usb_kill_urb(): __usb_hcd_giveback_urb(): ... ... atomic_inc(&urb->reject); atomic_dec(&urb->use_count); ... ... wait_event(usb_kill_urb_queue, atomic_read(&urb->use_count) == 0); if (atomic_read(&urb->reject)) wake_up(&usb_kill_urb_queue); Confining your attention to urb->reject and urb->use_count, you can see that the overall pattern of accesses on CPU 0 is: write urb->reject, then read urb->use_count; whereas the overall pattern of accesses on CPU 1 is: write urb->use_count, then read urb->reject. This pattern is referred to in memory-model circles as SB (for "Store Buffering"), and it is well known that without suitable enforcement of the desired order of accesses -- in the form of memory barriers -- it is entirely possible for one or both CPUs to execute their reads ahead of their writes. The end result will be that sometimes CPU 0 sees the old un-decremented value of urb->use_count while CPU 1 sees the old un-incremented value of urb->reject. Consequently CPU 0 ends up on the wait queue and never gets woken up, leading to the observed hang in usb_kill_urb(). The same pattern of accesses occurs in usb_poison_urb() and the failure pathway of usb_hcd_submit_urb(). The problem is fixed by adding suitable memory barriers. To provide proper memory-access ordering in the SB pattern, a full barrier is required on both CPUs. The atomic_inc() and atomic_dec() accesses themselves don't provide any memory ordering, but since they are present, we can use the optimized smp_mb__after_atomic() memory barrier in the various routines to obtain the desired effect. This patch adds the necessary memory barriers. CC: <stable@vger.kernel.org> Reported-and-tested-by:
<syzbot+76629376e06e2c2ad626@syzkaller.appspotmail.com> Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/Ye8K0QYee0Q0Nna2@rowland.harvard.edu Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-