- Apr 17, 2020
-
-
Christophe Leroy authored[ Upstream commit af92bad6 ] At the moment kasan_remap_early_shadow_ro() does nothing, because k_end is 0 and k_cur < 0 is always true. Change the test to k_cur != k_end, as done in kasan_init_shadow_page_tables() Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: cbd18991
("powerpc/mm: Fix an Oops in kasan_mmu_init()")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4e7b56865e01569058914c991143f5961b5d4719.1583507333.git.christophe.leroy@c-s.fr
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Imre Deak authored
The DDI IO power well must not be enabled for a TypeC port in TBT mode, ensure this during driver loading/system resume. This gets rid of error messages like [drm] *ERROR* power well DDI E TC2 IO state mismatch (refcount 1/enabled 0) and avoids leaking the power ref when disabling the output. Cc: <stable@vger.kernel.org> # v5.4+ Signed-off-by:
Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200330152244.11316-1-imre.deak@intel.com
(cherry picked from commit f77a2db2
)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Prike Liang authored
[ Upstream commit 487eca11 ] The system will be hang up during S3 suspend because of SMU is pending for GC not respose the register CP_HQD_ACTIVE access request.This issue root cause of accessing the GC register under enter GFX CGGPG and can be fixed by disable GFX CGPG before perform suspend. v2: Use disable the GFX CGPG instead of RLC safe mode guard. Signed-off-by:
Prike Liang <Prike.Liang@amd.com>
Tested-by: Mengbing Wang <Mengbing.Wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Lyude Paul authored
[ Upstream commit 8732fe46 ] The issues caused by: commit 64e62bdf ("drm/dp_mst: Remove VCPI while disabling topology mgr") Prompted me to take a closer look at how we clear the payload state in general when disabling the topology, and it turns out there's actually two subtle issues here. The first is that we're not grabbing &mgr.payload_lock when clearing the payloads in drm_dp_mst_topology_mgr_set_mst(). Seeing as the canonical lock order is &mgr.payload_lock -> &mgr.lock (because we always want &mgr.lock to be the inner-most lock so topology validation always works), this makes perfect sense. It also means that -technically- there could be racing between someone calling drm_dp_mst_topology_mgr_set_mst() to disable the topology, along with a modeset occurring that's modifying the payload state at the same time. The second is the more obvious issue that Wayne Lin discovered, that we're not clearing proposed_payloads when disabling the topology. I actually can't see any obvious places where the racing caused by the first issue would break something, and it could be that some of our higher-level locks already prevent this by happenstance, but better safe then sorry. So, let's make it so that drm_dp_mst_topology_mgr_set_mst() first grabs &mgr.payload_lock followed by &mgr.lock so that we never race when modifying the payload state. Then, we also clear proposed_payloads to fix the original issue of enabling a new topology with a dirty payload state. This doesn't clear any of the drm_dp_vcpi structures, but those are getting destroyed along with the ports anyway. Changes since v1: * Use sizeof(mgr->payloads[0])/sizeof(mgr->proposed_vcpis[0]) instead - vsyrjala Cc: Sean Paul <sean@poorly.run> Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org # v4.4+ Signed-off-by:
Lyude Paul <lyude@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200122194321.14953-1-lyude@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Sasha Levin authored
[ Upstream commit a8667596 ] This reverts commit 64e62bdf . This commit ends up causing some lockdep splats due to trying to grab the payload lock while holding the mgr's lock: [ 54.010099] [ 54.011765] ====================================================== [ 54.018670] WARNING: possible circular locking dependency detected [ 54.025577] 5.5.0-rc6-02274-g77381c23ee63 #47 Not tainted [ 54.031610] ------------------------------------------------------ [ 54.038516] kworker/1:6/1040 is trying to acquire lock: [ 54.044354] ffff888272af3228 (&mgr->payload_lock){+.+.}, at: drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.054957] [ 54.054957] but task is already holding lock: [ 54.061473] ffff888272af3060 (&mgr->lock){+.+.}, at: drm_dp_mst_topology_mgr_set_mst+0x3c/0x2e4 [ 54.071193] [ 54.071193] which lock already depends on the new lock. [ 54.071193] [ 54.080334] [ 54.080334] the existing dependency chain (in reverse order) is: [ 54.088697] [ 54.088697] -> #1 (&mgr->lock){+.+.}: [ 54.094440] __mutex_lock+0xc3/0x498 [ 54.099015] drm_dp_mst_topology_get_port_validated+0x25/0x80 [ 54.106018] drm_dp_update_payload_part1+0xa2/0x2e2 [ 54.112051] intel_mst_pre_enable_dp+0x144/0x18f [ 54.117791] intel_encoders_pre_enable+0x63/0x70 [ 54.123532] hsw_crtc_enable+0xa1/0x722 [ 54.128396] intel_update_crtc+0x50/0x194 [ 54.133455] skl_commit_modeset_enables+0x40c/0x540 [ 54.139485] intel_atomic_commit_tail+0x5f7/0x130d [ 54.145418] intel_atomic_commit+0x2c8/0x2d8 [ 54.150770] drm_atomic_helper_set_config+0x5a/0x70 [ 54.156801] drm_mode_setcrtc+0x2ab/0x833 [ 54.161862] drm_ioctl+0x2e5/0x424 [ 54.166242] vfs_ioctl+0x21/0x2f [ 54.170426] do_vfs_ioctl+0x5fb/0x61e [ 54.175096] ksys_ioctl+0x55/0x75 [ 54.179377] __x64_sys_ioctl+0x1a/0x1e [ 54.184146] do_syscall_64+0x5c/0x6d [ 54.188721] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 54.194946] [ 54.194946] -> #0 (&mgr->payload_lock){+.+.}: [ 54.201463] [ 54.201463] other info that might help us debug this: [ 54.201463] [ 54.210410] Possible unsafe locking scenario: [ 54.210410] [ 54.217025] CPU0 CPU1 [ 54.222082] ---- ---- [ 54.227138] lock(&mgr->lock); [ 54.230643] lock(&mgr->payload_lock); [ 54.237742] lock(&mgr->lock); [ 54.244062] lock(&mgr->payload_lock); [ 54.248346] [ 54.248346] *** DEADLOCK *** [ 54.248346] [ 54.254959] 7 locks held by kworker/1:6/1040: [ 54.259822] #0: ffff888275c4f528 ((wq_completion)events){+.+.}, at: worker_thread+0x455/0x6e2 [ 54.269451] #1: ffffc9000119beb0 ((work_completion)(&(&dev_priv->hotplug.hotplug_work)->work)){+.+.}, at: worker_thread+0x455/0x6e2 [ 54.282768] #2: ffff888272a403f0 (&dev->mode_config.mutex){+.+.}, at: i915_hotplug_work_func+0x4b/0x2be [ 54.293368] #3: ffffffff824fc6c0 (drm_connector_list_iter){.+.+}, at: i915_hotplug_work_func+0x17e/0x2be [ 54.304061] #4: ffffc9000119bc58 (crtc_ww_class_acquire){+.+.}, at: drm_helper_probe_detect_ctx+0x40/0xfd [ 54.314855] #5: ffff888272a40470 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_lock+0x74/0xe2 [ 54.324385] #6: ffff888272af3060 (&mgr->lock){+.+.}, at: drm_dp_mst_topology_mgr_set_mst+0x3c/0x2e4 [ 54.334597] [ 54.334597] stack backtrace: [ 54.339464] CPU: 1 PID: 1040 Comm: kworker/1:6 Not tainted 5.5.0-rc6-02274-g77381c23ee63 #47 [ 54.348893] Hardware name: Google Fizz/Fizz, BIOS Google_Fizz.10139.39.0 01/04/2018 [ 54.357451] Workqueue: events i915_hotplug_work_func [ 54.362995] Call Trace: [ 54.365724] dump_stack+0x71/0x9c [ 54.369427] check_noncircular+0x91/0xbc [ 54.373809] ? __lock_acquire+0xc9e/0xf66 [ 54.378286] ? __lock_acquire+0xc9e/0xf66 [ 54.382763] ? lock_acquire+0x175/0x1ac [ 54.387048] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.393177] ? __mutex_lock+0xc3/0x498 [ 54.397362] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.403492] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.409620] ? drm_dp_dpcd_access+0xd9/0x101 [ 54.414390] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.420517] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.426645] ? intel_digital_port_connected+0x34d/0x35c [ 54.432482] ? intel_dp_detect+0x227/0x44e [ 54.437056] ? ww_mutex_lock+0x49/0x9a [ 54.441242] ? drm_helper_probe_detect_ctx+0x75/0xfd [ 54.446789] ? intel_encoder_hotplug+0x4b/0x97 [ 54.451752] ? intel_ddi_hotplug+0x61/0x2e0 [ 54.456423] ? mark_held_locks+0x53/0x68 [ 54.460803] ? _raw_spin_unlock_irqrestore+0x3a/0x51 [ 54.466347] ? lockdep_hardirqs_on+0x187/0x1a4 [ 54.471310] ? drm_connector_list_iter_next+0x89/0x9a [ 54.476953] ? i915_hotplug_work_func+0x206/0x2be [ 54.482208] ? worker_thread+0x4d5/0x6e2 [ 54.486587] ? worker_thread+0x455/0x6e2 [ 54.490966] ? queue_work_on+0x64/0x64 [ 54.495151] ? kthread+0x1e9/0x1f1 [ 54.498946] ? queue_work_on+0x64/0x64 [ 54.503130] ? kthread_unpark+0x5e/0x5e [ 54.507413] ? ret_from_fork+0x3a/0x50 The proper fix for this is probably cleanup the VCPI allocations when we're enabling the topology, or on the first payload allocation. For now though, let's just revert. Signed-off-by:
Lyude Paul <lyude@redhat.com>
Fixes: 64e62bdf
("drm/dp_mst: Remove VCPI while disabling topology mgr")
Cc: Sean Paul <sean@poorly.run>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200117205149.97262-1-lyude@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org> -
James Smart authored
[ Upstream commit 835214f5 ] When driver is set to enable bb credit recovery, the switch displayed the setting as inactive. If the link bounces, it switches to Active. During link up processing, the driver currently does a MBX_READ_SPARAM followed by a MBX_CONFIG_LINK. These mbox commands are queued to be executed, one at a time and the completion is processed by the worker thread. Since the MBX_READ_SPARAM is done BEFORE the MBX_CONFIG_LINK, the BB_SC_N bit is never set the the returned values. BB Credit recovery status only gets set after the driver requests the feature in CONFIG_LINK, which is done after the link up. Thus the ordering of READ_SPARAM needs to follow the CONFIG_LINK. Fix by reordering so that READ_SPARAM is done after CONFIG_LINK. Added a HBA_DEFER_FLOGI flag so that any FLOGI handling waits until after the READ_SPARAM is done so that the proper BB credit value is set in the FLOGI payload. Fixes: 6bfb1620 ("scsi: lpfc: Fix configuration of BB credit recovery in service parameters") Cc: <stable@vger.kernel.org> # v5.4+ Link: https://lore.kernel.org/r/20200128002312.16346-4-jsmart2021@gmail.com Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
James Smart authored
[ Upstream commit 6bfb1620 ] The driver today is reading service parameters from the firmware and then overwriting the firmware-provided values with values of its own. There are some switch features that require preliminary FLOGI's that are switch-specific and done prior to the actual fabric FLOGI for traffic. The fw will perform those FLOGIs and will revise the service parameters for the features configured. As the driver later overwrites those values with its own values, it misconfigures things like BBSCN use by doing so. Correct by eliminating the driver-overwrite of firmware values. The driver correctly re-reads the service parameters after each link up to obtain the latest values from firmware. Link: https://lore.kernel.org/r/20191105005708.7399-3-jsmart2021@gmail.com Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
James Smart authored
[ Upstream commit e3ba04c9 ] There are reports of multiple ports on the same system displaying different hostnames in fabric FDMI displays. Currently, the driver registers the hostname at initialization and obtains the hostname via init_utsname()->nodename queried at the time the FC link comes up. Unfortunately, if the machine hostname is updated after initialization, such as via DHCP or admin command, the value registered initially will be incorrect. Fix by having the driver save the hostname that was registered with FDMI. The driver then runs a heartbeat action that will check the hostname. If the name changes, reregister the FMDI data. The hostname is used in RSNN_NN, FDMI RPA and FDMI RHBA. Link: https://lore.kernel.org/r/20191218235808.31922-5-jsmart2021@gmail.com Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
James Smart authored
[ Upstream commit 93a4d6f4 ] The recent affinitization didn't address cpu offlining/onlining. If an interrupt vector is shared and the low order cpu owning the vector is offlined, as interrupts are managed, the vector is taken offline. This causes the other CPUs sharing the vector will hang as they can't get io completions. Correct by registering callbacks with the system for Offline/Online events. When a cpu is taken offline, its eq, which is tied to an interrupt vector is found. If the cpu is the "owner" of the vector and if the eq/vector is shared by other CPUs, the eq is placed into a polled mode. Additionally, code paths that perform io submission on the "sharing CPUs" will check the eq state and poll for completion after submission of new io to a wq that uses the eq. Similarly, when a cpu comes back online and owns an offlined vector, the eq is taken out of polled mode and rearmed to start driving interrupts for eq. Link: https://lore.kernel.org/r/20191105005708.7399-9-jsmart2021@gmail.com Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Nikos Tsironis authored
[ Upstream commit 9fc06ff5 ] Add missing casts when converting from regions to sectors. In case BITS_PER_LONG == 32, the lack of the appropriate casts can lead to overflows and miscalculation of the device sector. As a result, we could end up discarding and/or copying the wrong parts of the device, thus corrupting the device's data. Fixes: 7431b783 ("dm: add clone target") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by:
Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Nikos Tsironis authored
[ Upstream commit 4b514290 ] There is a bug in the way dm-clone handles discards, which can lead to discarding the wrong blocks or trying to discard blocks beyond the end of the device. This could lead to data corruption, if the destination device indeed discards the underlying blocks, i.e., if the discard operation results in the original contents of a block to be lost. The root of the problem is the code that calculates the range of regions covered by a discard request and decides which regions to discard. Since dm-clone handles the device in units of regions, we don't discard parts of a region, only whole regions. The range is calculated as: rs = dm_sector_div_up(bio->bi_iter.bi_sector, clone->region_size); re = bio_end_sector(bio) >> clone->region_shift; , where 'rs' is the first region to discard and (re - rs) is the number of regions to discard. The bug manifests when we try to discard part of a single region, i.e., when we try to discard a block with size < region_size, and the discard request both starts at an offset with respect to the beginning of that region and ends before the end of the region. The root cause is the following comparison: if (rs == re) // skip discard and complete original bio immediately , which doesn't take into account that 'rs' might be greater than 're'. Thus, we then issue a discard request for the wrong blocks, instead of skipping the discard all together. Fix the check to also take into account the above case, so we don't end up discarding the wrong blocks. Also, add some range checks to dm_clone_set_region_hydrated() and dm_clone_cond_set_range(), which update dm-clone's region bitmap. Note that the aforementioned bug doesn't cause invalid memory accesses, because dm_clone_is_range_hydrated() returns True for this case, so the checks are just precautionary. Fixes: 7431b783 ("dm: add clone target") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by:
Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Mikulas Patocka authored
[ Upstream commit 6ca43ed8 ] If we are in a place where it is known that interrupts are enabled, functions spin_lock_irq/spin_unlock_irq should be used instead of spin_lock_irqsave/spin_unlock_irqrestore. spin_lock_irq and spin_unlock_irq are faster because they don't need to push and pop the flags register. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Bob Liu authored
[ Upstream commit b8fdd090 ] zmd->nr_rnd_zones was increased twice by mistake. The other place it is increased in dmz_init_zone() is the only one needed: 1131 zmd->nr_useable_zones++; 1132 if (dmz_is_rnd(zone)) { 1133 zmd->nr_rnd_zones++; ^^^ Fixes: 3b1a94c8 ("dm zoned: drive-managed zoned block device target") Cc: stable@vger.kernel.org Signed-off-by:
Bob Liu <bob.liu@oracle.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Mark Brown authored
commit b8fdef31 upstream. Compilers with branch protection support can be configured to enable it by default, it is likely that distributions will do this as part of deploying branch protection system wide. As well as the slight overhead from having some extra NOPs for unused branch protection features this can cause more serious problems when the kernel is providing pointer authentication to userspace but not built for pointer authentication itself. In that case our switching of keys for userspace can affect the kernel unexpectedly, causing pointer authentication instructions in the kernel to corrupt addresses. To ensure that we get consistent and reliable behaviour always explicitly initialise the branch protection mode, ensuring that the kernel is built the same way regardless of the compiler defaults. [This is a reworked version of b8fdef31 ("arm64: Always force a branch protection mode when the compiler has one") for backport. Kernels prior to 74afda40 ("arm64: compile the kernel with ptrauth return address signing") don't have any Makefile machinery for forcing on pointer auth but still have issues if the compiler defaults it on so need this reworked version. -- broonie] Fixes: 75031975 (arm64: add basic pointer authentication support) Reported-by:
Szabolcs Nagy <szabolcs.nagy@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
[catalin.marinas@arm.com: remove Kconfig option in favour of Makefile check]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Clement Courbet authored
commit c17eb4dc upstream. Declaring setjmp()/longjmp() as taking longs makes the signature non-standard, and makes clang complain. In the past, this has been worked around by adding -ffreestanding to the compile flags. The implementation looks like it only ever propagates the value (in longjmp) or sets it to 1 (in setjmp), and we only call longjmp with integer parameters. This allows removing -ffreestanding from the compilation flags. Fixes: c9029ef9 ("powerpc: Avoid clang warnings around setjmp and longjmp") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by:
Clement Courbet <courbet@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200330080400.124803-1-courbet@google.com
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Sreekanth Reddy authored
commit cc41f11a upstream. Generic protection fault type kernel panic is observed when user performs soft (ordered) HBA unplug operation while IOs are running on drives connected to HBA. When user performs ordered HBA removal operation, the kernel calls PCI device's .remove() call back function where driver is flushing out all the outstanding SCSI IO commands with DID_NO_CONNECT host byte and also unmaps sg buffers allocated for these IO commands. However, in the ordered HBA removal case (unlike of real HBA hot removal), HBA device is still alive and hence HBA hardware is performing the DMA operations to those buffers on the system memory which are already unmapped while flushing out the outstanding SCSI IO commands and this leads to kernel panic. Don't flush out the outstanding IOs from .remove() path in case of ordered removal since HBA will be still alive in this case and it can complete the outstanding IOs. Flush out the outstanding IOs only in case of 'physical HBA hot unplug' where there won't be any communication with the HBA. During shutdown also it is possible that HBA hardware can perform DMA operations on those outstanding IO buffers which are completed with DID_NO_CONNECT by the driver from .shutdown(). So same above fix is applied in shutdown path as well. It is safe to drop the outstanding commands when HBA is inaccessible such as when permanent PCI failure happens, when HBA is in non-operational state, or when someone does a real HBA hot unplug operation. Since driver knows that HBA is inaccessible during these cases, it is safe to drop the outstanding commands instead of waiting for SCSI error recovery to kick in and clear these outstanding commands. Link: https://lore.kernel.org/r/1585302763-23007-1-git-send-email-sreekanth.reddy@broadcom.com Fixes: c666d3be ("scsi: mpt3sas: wait for and flush running commands on shutdown/unload") Cc: stable@vger.kernel.org #v4.14.174+ Signed-off-by:
Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Ellerman authored
commit 7053f80d upstream. The previous commit reduced the amount of code that is run before we setup a paca. However there are still a few remaining functions that run with no paca, or worse, with an arbitrary value in r13 that will be used as a paca pointer. In particular the stack protector canary is stored in the paca, so if stack protector is activated for any of these functions we will read the stack canary from wherever r13 points. If r13 happens to point outside of memory we will get a machine check / checkstop. For example if we modify initialise_paca() to trigger stack protection, and then boot in the mambo simulator with r13 poisoned in skiboot before calling the kernel: DEBUG: 19952232: (19952232): INSTRUCTION: PC=0xC0000000191FC1E8: [0x3C4C006D]: addis r2,r12,0x6D [fetch] DEBUG: 19952236: (19952236): INSTRUCTION: PC=0xC00000001807EAD8: [0x7D8802A6]: mflr r12 [fetch] FATAL ERROR: 19952276: (19952276): Check Stop for 0:0: Machine Check with ME bit of MSR off DEBUG: 19952276: (19952276): INSTRUCTION: PC=0xC0000000191FCA7C: [0xE90D0CF8]: ld r8,0xCF8(r13) [Instruction Failed] INFO: 19952276: (19952277): ** Execution stopped: Mambo Error, Machine Check Stop, ** systemsim % bt pc: 0xC0000000191FCA7C initialise_paca+0x54 lr: 0xC0000000191FC22C early_setup+0x44 stack:0x00000000198CBED0 0x0 +0x0 stack:0x00000000198CBF00 0xC0000000191FC22C early_setup+0x44 stack:0x00000000198CBF90 0x1801C968 +0x1801C968 So annotate the relevant functions to ensure stack protection is never enabled for them. Fixes: 06ec27ae ("powerpc/64: add stack protector support") Cc: stable@vger.kernel.org # v4.20+ Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200320032116.1024773-2-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Christophe Leroy authored
commit 21f8b2fa upstream. When a program check exception happens while MMU translation is disabled, following Oops happens in kprobe_handler() in the following code: } else if (*addr != BREAKPOINT_INSTRUCTION) { BUG: Unable to handle kernel data access on read at 0x0000e268 Faulting instruction address: 0xc000ec34 Oops: Kernel access of bad area, sig: 11 [#1] BE PAGE_SIZE=16K PREEMPT CMPC885 Modules linked in: CPU: 0 PID: 429 Comm: cat Not tainted 5.6.0-rc1-s3k-dev-00824-g84195dc6c58a #3267 NIP: c000ec34 LR: c000ecd8 CTR: c019cab8 REGS: ca4d3b58 TRAP: 0300 Not tainted (5.6.0-rc1-s3k-dev-00824-g84195dc6c58a) MSR: 00001032 <ME,IR,DR,RI> CR: 2a4d3c52 XER: 00000000 DAR: 0000e268 DSISR: c0000000 GPR00: c000b09c ca4d3c10 c66d0620 00000000 ca4d3c60 00000000 00009032 00000000 GPR08: 00020000 00000000 c087de44 c000afe0 c66d0ad0 100d3dd6 fffffff3 00000000 GPR16: 00000000 00000041 00000000 ca4d3d70 00000000 00000000 0000416d 00000000 GPR24: 00000004 c53b6128 00000000 0000e268 00000000 c07c0000 c07bb6fc ca4d3c60 NIP [c000ec34] kprobe_handler+0x128/0x290 LR [c000ecd8] kprobe_handler+0x1cc/0x290 Call Trace: [ca4d3c30] [c000b09c] program_check_exception+0xbc/0x6fc [ca4d3c50] [c000e43c] ret_from_except_full+0x0/0x4 --- interrupt: 700 at 0xe268 Instruction dump: 913e0008 81220000 38600001 3929ffff 91220000 80010024 bb410008 7c0803a6 38210020 4e800020 38600000 4e800020 <813b0000> 6d2a7fe0 2f8a0008 419e0154 ---[ end trace 5b9152d4cdadd06d ]--- kprobe is not prepared to handle events in real mode and functions running in real mode should have been blacklisted, so kprobe_handler() can safely bail out telling 'this trap is not mine' for any trap that happened while in real-mode. If the trap happened with MSR_IR or MSR_DR cleared, return 0 immediately. Reported-by:
Larry Finger <Larry.Finger@lwfinger.net>
Fixes: 6cc89bad
("powerpc/kprobes: Invoke handlers directly")
Cc: stable@vger.kernel.org # v4.10+
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/424331e2006e7291a1bfe40e7f3fa58825f565e1.1582054578.git.christophe.leroy@c-s.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Cédric Le Goater authored
commit 97ef2750 upstream. The PowerNV platform has multiple IRQ chips and the xmon command dumping the state of the XIVE interrupt should only operate on the XIVE IRQ chip. Fixes: 5896163f ("powerpc/xmon: Improve output of XIVE interrupts") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by:
Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200306150143.5551-3-clg@kaod.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Daniel Axtens authored
commit d4a8e986 upstream. Currently we set up the paca after parsing the device tree for CPU features. Prior to that, r13 contains random data, which means there is random data in r13 while we're running the generic dt parsing code. This random data varies depending on whether we boot through a vmlinux or a zImage: for the vmlinux case it's usually around zero, but for zImages we see random values like 912a72603d420015. This is poor practice, and can also lead to difficult-to-debug crashes. For example, when kcov is enabled, the kcov instrumentation attempts to read preempt_count out of the current task, which goes via the paca. This then crashes in the zImage case. Similarly stack protector can cause crashes if r13 is bogus, by reading from the stack canary in the paca. To resolve this: - move the paca setup to before the CPU feature parsing. - because we no longer have access to CPU feature flags in paca setup, change the HV feature test in the paca setup path to consider the actual value of the MSR rather than the CPU feature. Translations get switched on once we leave early_setup, so I think we'd already catch any other cases where the paca or task aren't set up. Boot tested on a P9 guest and host. Fixes: fb0b0a73 ("powerpc: Enable kcov") Fixes: 06ec27ae ("powerpc/64: add stack protector support") Cc: stable@vger.kernel.org # v4.20+ Reviewed-by:
Andrew Donnellan <ajd@linux.ibm.com>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Daniel Axtens <dja@axtens.net>
[mpe: Reword comments & change log a bit to mention stack protector]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200320032116.1024773-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Cédric Le Goater authored
commit b1a504a6 upstream. When a CPU is brought up, an IPI number is allocated and recorded under the XIVE CPU structure. Invalid IPI numbers are tracked with interrupt number 0x0. On the PowerNV platform, the interrupt number space starts at 0x10 and this works fine. However, on the sPAPR platform, it is possible to allocate the interrupt number 0x0 and this raises an issue when CPU 0 is unplugged. The XIVE spapr driver tracks allocated interrupt numbers in a bitmask and it is not correctly updated when interrupt number 0x0 is freed. It stays allocated and it is then impossible to reallocate. Fix by using the XIVE_BAD_IRQ value instead of zero on both platforms. Reported-by:
David Gibson <david@gibson.dropbear.id.au>
Fixes: eac1e731
("powerpc/xive: guest exploitation of the XIVE interrupt controller")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200306150143.5551-2-clg@kaod.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Aneesh Kumar K.V authored
commit 36b78402 upstream. H_PAGE_THP_HUGE is used to differentiate between a THP hugepage and hugetlb hugepage entries. The difference is WRT how we handle hash fault on these address. THP address enables MPSS in segments. We want to manage devmap hugepage entries similar to THP pt entries. Hence use H_PAGE_THP_HUGE for devmap huge PTE entries. With current code while handling hash PTE fault, we do set is_thp = true when finding devmap PTE huge PTE entries. Current code also does the below sequence we setting up huge devmap entries. entry = pmd_mkhuge(pfn_t_pmd(pfn, prot)); if (pfn_t_devmap(pfn)) entry = pmd_mkdevmap(entry); In that case we would find both H_PAGE_THP_HUGE and PAGE_DEVMAP set for huge devmap PTE entries. This results in false positive error like below. kernel BUG at /home/kvaneesh/src/linux/mm/memory.c:4321! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: CPU: 56 PID: 67996 Comm: t_mmap_dio Not tainted 5.6.0-rc4-59640-g371c804dedbc #128 .... NIP [c00000000044c9e4] __follow_pte_pmd+0x264/0x900 LR [c0000000005d45f8] dax_writeback_one+0x1a8/0x740 Call Trace: str_spec.74809+0x22ffb4/0x2d116c (unreliable) dax_writeback_one+0x1a8/0x740 dax_writeback_mapping_range+0x26c/0x700 ext4_dax_writepages+0x150/0x5a0 do_writepages+0x68/0x180 __filemap_fdatawrite_range+0x138/0x180 file_write_and_wait_range+0xa4/0x110 ext4_sync_file+0x370/0x6e0 vfs_fsync_range+0x70/0xf0 sys_msync+0x220/0x2e0 system_call+0x5c/0x68 This is because our pmd_trans_huge check doesn't exclude _PAGE_DEVMAP. To make this all consistent, update pmd_mkdevmap to set H_PAGE_THP_HUGE and pmd_trans_huge check now excludes _PAGE_DEVMAP correctly. Fixes: ebd31197 ("powerpc/mm: Add devmap support for ppc64") Cc: stable@vger.kernel.org # v4.13+ Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200313094842.351830-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Laurentiu Tudor authored
commit aa411334 upstream. In the current implementation, the call to loadcam_multi() is wrapped between switch_to_as1() and restore_to_as0() calls so, when it tries to create its own temporary AS=1 TLB1 entry, it ends up duplicating the existing one created by switch_to_as1(). Add a check to skip creating the temporary entry if already running in AS=1. Fixes: d9e1831a ("powerpc/85xx: Load all early TLB entries at once") Cc: stable@vger.kernel.org # v4.4+ Signed-off-by:
Laurentiu Tudor <laurentiu.tudor@nxp.com>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200123111914.2565-1-laurentiu.tudor@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Michael Ellerman authored
commit c7def7fb upstream. In restore_tm_sigcontexts() we take the trap value directly from the user sigcontext with no checking: err |= __get_user(regs->trap, &sc->gp_regs[PT_TRAP]); This means we can be in the kernel with an arbitrary regs->trap value. Although that's not immediately problematic, there is a risk we could trigger one of the uses of CHECK_FULL_REGS(): #define CHECK_FULL_REGS(regs) BUG_ON(regs->trap & 1) It can also cause us to unnecessarily save non-volatile GPRs again in save_nvgprs(), which shouldn't be problematic but is still wrong. It's also possible it could trick the syscall restart machinery, which relies on regs->trap not being == 0xc00 (see 9a81c16b ("powerpc: fix double syscall restarts")), though I haven't been able to make that happen. Finally it doesn't match the behaviour of the non-TM case, in restore_sigcontext() which zeroes regs->trap. So change restore_tm_sigcontexts() to zero regs->trap. This was discovered while testing Nick's upcoming rewrite of the syscall entry path. In that series the call to save_nvgprs() prior to signal handling (do_notify_resume()) is removed, which leaves the low-bit of regs->trap uncleared which can then trigger the FULL_REGS() WARNs in setup_tm_sigcontexts(). Fixes: 2b0a576d ("powerpc: Add new transactional memory state to the signal context") Cc: stable@vger.kernel.org # v3.9+ Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200401023836.3286664-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Juergen Gross authored
commit 3a169c0b upstream. Commit 1d5c76e6 ("xen-blkfront: switch kcalloc to kvcalloc for large array allocation") didn't fix the issue it was meant to, as the flags for allocating the memory are GFP_NOIO, which will lead the memory allocation falling back to kmalloc(). So instead of GFP_NOIO use GFP_KERNEL and do all the memory allocation in blkfront_setup_indirect() in a memalloc_noio_{save,restore} section. Fixes: 1d5c76e6 ("xen-blkfront: switch kcalloc to kvcalloc for large array allocation") Cc: stable@vger.kernel.org Signed-off-by:
Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20200403090034.8753-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Wen Yang authored
commit 32830a05 upstream. The wait_event() function is used to detect command completion. When send_guid_cmd() returns an error, smi_send() has not been called to send data. Therefore, wait_event() should not be used on the error path, otherwise it will cause the following warning: [ 1361.588808] systemd-udevd D 0 1501 1436 0x00000004 [ 1361.588813] ffff883f4b1298c0 0000000000000000 ffff883f4b188000 ffff887f7e3d9f40 [ 1361.677952] ffff887f64bd4280 ffffc90037297a68 ffffffff8173ca3b ffffc90000000010 [ 1361.767077] 00ffc90037297ad0 ffff887f7e3d9f40 0000000000000286 ffff883f4b188000 [ 1361.856199] Call Trace: [ 1361.885578] [<ffffffff8173ca3b>] ? __schedule+0x23b/0x780 [ 1361.951406] [<ffffffff8173cfb6>] schedule+0x36/0x80 [ 1362.010979] [<ffffffffa071f178>] get_guid+0x118/0x150 [ipmi_msghandler] [ 1362.091281] [<ffffffff810d5350>] ? prepare_to_wait_event+0x100/0x100 [ 1362.168533] [<ffffffffa071f755>] ipmi_register_smi+0x405/0x940 [ipmi_msghandler] [ 1362.258337] [<ffffffffa0230ae9>] try_smi_init+0x529/0x950 [ipmi_si] [ 1362.334521] [<ffffffffa022f350>] ? std_irq_setup+0xd0/0xd0 [ipmi_si] [ 1362.411701] [<ffffffffa0232bd2>] init_ipmi_si+0x492/0x9e0 [ipmi_si] [ 1362.487917] [<ffffffffa0232740>] ? ipmi_pci_probe+0x280/0x280 [ipmi_si] [ 1362.568219] [<ffffffff810021a0>] do_one_initcall+0x50/0x180 [ 1362.636109] [<ffffffff812231b2>] ? kmem_cache_alloc_trace+0x142/0x190 [ 1362.714330] [<ffffffff811b2ae1>] do_init_module+0x5f/0x200 [ 1362.781208] [<ffffffff81123ca8>] load_module+0x1898/0x1de0 [ 1362.848069] [<ffffffff811202e0>] ? __symbol_put+0x60/0x60 [ 1362.913886] [<ffffffff8130696b>] ? security_kernel_post_read_file+0x6b/0x80 [ 1362.998514] [<ffffffff81124465>] SYSC_finit_module+0xe5/0x120 [ 1363.068463] [<ffffffff81124465>] ? SYSC_finit_module+0xe5/0x120 [ 1363.140513] [<ffffffff811244be>] SyS_finit_module+0xe/0x10 [ 1363.207364] [<ffffffff81003c04>] do_syscall_64+0x74/0x180 Fixes: 50c812b2 ("[PATCH] ipmi: add full sysfs support") Signed-off-by:
Wen Yang <wenyang@linux.alibaba.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: openipmi-developer@lists.sourceforge.net
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # 2.6.17-
Message-Id: <20200403090408.58745-1-wenyang@linux.alibaba.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Kai-Heng Feng authored
commit 8305f72f upstream. During system resume from suspend, this can be observed on ASM1062 PMP controller: ata10.01: SATA link down (SStatus 0 SControl 330) ata10.02: hard resetting link ata10.02: SATA link down (SStatus 0 SControl 330) ata10.00: configured for UDMA/133 Kernel panic - not syncing: stack-protector: Kernel in: sata_pmp_eh_recover+0xa2b/0xa40 CPU: 2 PID: 230 Comm: scsi_eh_9 Tainted: P OE #49-Ubuntu Hardware name: System manufacturer System Product 1001 12/10/2017 Call Trace: dump_stack+0x63/0x8b panic+0xe4/0x244 ? sata_pmp_eh_recover+0xa2b/0xa40 __stack_chk_fail+0x19/0x20 sata_pmp_eh_recover+0xa2b/0xa40 ? ahci_do_softreset+0x260/0x260 [libahci] ? ahci_do_hardreset+0x140/0x140 [libahci] ? ata_phys_link_offline+0x60/0x60 ? ahci_stop_engine+0xc0/0xc0 [libahci] sata_pmp_error_handler+0x22/0x30 ahci_error_handler+0x45/0x80 [libahci] ata_scsi_port_error_handler+0x29b/0x770 ? ata_scsi_cmd_error_handler+0x101/0x140 ata_scsi_error+0x95/0xd0 ? scsi_try_target_reset+0x90/0x90 scsi_error_handler+0xd0/0x5b0 kthread+0x121/0x140 ? scsi_eh_get_sense+0x200/0x200 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x22/0x40 Kernel Offset: 0xcc00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Since sata_pmp_eh_recover_pmp() doens't set rc when ATA_DFLAG_DETACH is set, sata_pmp_eh_recover() continues to run. During retry it triggers the stack protector. Set correct rc in sata_pmp_eh_recover_pmp() to let sata_pmp_eh_recover() jump to pmp_fail directly. BugLink: https://bugs.launchpad.net/bugs/1821434 Cc: stable@vger.kernel.org Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Simon Gander authored
commit 25efb2ff upstream. When removing files containing extended attributes, the hfsplus driver may remove the wrong entries from the attributes b-tree, causing major filesystem damage and in some cases even kernel crashes. To remove a file, all its extended attributes have to be removed as well. The driver does this by looking up all keys in the attributes b-tree with the cnid of the file. Each of these entries then gets deleted using the key used for searching, which doesn't contain the attribute's name when it should. Since the key doesn't contain the name, the deletion routine will not find the correct entry and instead remove the one in front of it. If parent nodes have to be modified, these become corrupt as well. This causes invalid links and unsorted entries that not even macOS's fsck_hfs is able to fix. To fix this, modify the search key before an entry is deleted from the attributes b-tree by copying the found entry's key into the search key, therefore ensuring that the correct entry gets removed from the tree. Signed-off-by:
Simon Gander <simon@tuxera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Anton Altaparmakov <anton@tuxera.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200327155541.1521-1-simon@tuxera.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Oliver O'Halloran authored
commit d0a72efa upstream. The cpufreq driver has a use-after-free that we can hit if: a) There's an OCC message pending when the notifier is registered, and b) The cpufreq driver fails to register with the core. When a) occurs the notifier schedules a workqueue item to handle the message. The backing work_struct is located on chips[].throttle and when b) happens we clean up by freeing the array. Once we get to the (now free) queued item and the kernel crashes. Fixes: c5e29ea7 ("cpufreq: powernv: Fix bugs in powernv_cpufreq_{init/exit}") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by:
Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200206062622.28235-1-oohall@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Eric Biggers authored
commit d7d27cfc upstream. Patch series "module autoloading fixes and cleanups", v5. This series fixes a bug where request_module() was reporting success to kernel code when module autoloading had been completely disabled via 'echo > /proc/sys/kernel/modprobe'. It also addresses the issues raised on the original thread (https://lkml.kernel.org/lkml/20200310223731.126894-1-ebiggers@kernel.org/T/#u) bydocumenting the modprobe sysctl, adding a self-test for the empty path case, and downgrading a user-reachable WARN_ONCE(). This patch (of 4): It's long been possible to disable kernel module autoloading completely (while still allowing manual module insertion) by setting /proc/sys/kernel/modprobe to the empty string. This can be preferable to setting it to a nonexistent file since it avoids the overhead of an attempted execve(), avoids potential deadlocks, and avoids the call to security_kernel_module_request() and thus on SELinux-based systems eliminates the need to write SELinux rules to dontaudit module_request. However, when module autoloading is disabled in this way, request_module() returns 0. This is broken because callers expect 0 to mean that the module was successfully loaded. Apparently this was never noticed because this method of disabling module autoloading isn't used much, and also most callers don't use the return value of request_module() since it's always necessary to check whether the module registered its functionality or not anyway. But improperly returning 0 can indeed confuse a few callers, for example get_fs_type() in fs/filesystems.c where it causes a WARNING to be hit: if (!fs && (request_module("fs-%.*s", len, name) == 0)) { fs = __get_fs_type(name, len); WARN_ONCE(!fs, "request_module fs-%.*s succeeded, but still no fs?\n", len, name); } This is easily reproduced with: echo > /proc/sys/kernel/modprobe mount -t NONEXISTENT none / It causes: request_module fs-NONEXISTENT succeeded, but still no fs? WARNING: CPU: 1 PID: 1106 at fs/filesystems.c:275 get_fs_type+0xd6/0xf0 [...] This should actually use pr_warn_once() rather than WARN_ONCE(), since it's also user-reachable if userspace immediately unloads the module. Regardless, request_module() should correctly return an error when it fails. So let's make it return -ENOENT, which matches the error when the modprobe binary doesn't exist. I've also sent patches to document and test this case. Signed-off-by:
Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Ben Hutchings <benh@debian.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200310223731.126894-1-ebiggers@kernel.org
Link: http://lkml.kernel.org/r/20200312202552.241885-1-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Paul Cercueil authored
commit edcc4294 upstream. When requesting a rate superior to the parent's rate, it would return -EINVAL instead of simply returning the parent's rate like it should. Fixes: 4f89e4b8 ("clk: ingenic: Add driver for the TCU clocks") Cc: stable@vger.kernel.org Signed-off-by:
Paul Cercueil <paul@crapouillou.net>
Link: https://lkml.kernel.org/r/20200213161952.37460-2-paul@crapouillou.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Paul Cercueil authored
commit c067b46d upstream. Exit jz4770_cgu_init() if the 'cgu' pointer we get is NULL, since the pointer is passed as argument to functions later on. Fixes: 7a01c190 ("clk: Add Ingenic jz4770 CGU driver") Cc: stable@vger.kernel.org Signed-off-by:
Paul Cercueil <paul@crapouillou.net>
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lkml.kernel.org/r/20200213161952.37460-1-paul@crapouillou.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Masami Hiramatsu authored
commit 6a13a0d7 upstream. Show maxactive parameter on kprobe_events. This allows user to save the current configuration and restore it without losing maxactive parameter. Link: http://lkml.kernel.org/r/4762764a-6df7-bc93-ed60-e336146dce1f@gmail.com Link: http://lkml.kernel.org/r/158503528846.22706.5549974121212526020.stgit@devnote2 Cc: stable@vger.kernel.org Fixes: 696ced4f ("tracing/kprobes: expose maxactive for kretprobe in kprobe_events") Reported-by:
Taeung Song <treeze.taeung@gmail.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Hans de Goede authored
commit ebc68ced upstream. The Acer Aspire 5738z has a button to disable (and re-enable) the touchpad next to the touchpad. When this button is pressed a LED underneath indicates that the touchpad is disabled (and an event is send to userspace and GNOME shows its touchpad enabled / disable OSD thingie). So far so good, but after re-enabling the touchpad it no longer works. The laptop does not have an external ps2 port, so mux mode is not needed and disabling mux mode fixes the touchpad no longer working after toggling it off and back on again, so lets add this laptop model to the nomux list. Signed-off-by:
Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200331123947.318908-1-hdegoede@redhat.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Michael Mueller authored
commit 6c7c851f upstream. Show the full diag statistic table and not just parts of it. The issue surfaced in a KVM guest with a number of vcpus defined smaller than NR_DIAG_STAT. Fixes: 1ec2772e ("s390/diag: add a statistic for diagnose calls") Cc: stable@vger.kernel.org Signed-off-by:
Michael Mueller <mimu@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Sam Lunt authored
commit b9c9ce4e upstream. Python 3.8 changed the output of 'python-config --ldflags' to no longer include the '-lpythonX.Y' flag (this apparently fixed an issue loading modules with a statically linked Python executable). The libpython feature check in linux/build/feature fails if the Python library is not included in FEATURE_CHECK_LDFLAGS-libpython variable. This adds a check in the Makefile to determine if PYTHON_CONFIG accepts the '--embed' flag and passes that flag alongside '--ldflags' if so. tools/perf is the only place the libpython feature check is used. Signed-off-by:
Sam Lunt <samuel.j.lunt@gmail.com>
Tested-by: He Zhe <zhe.he@windriver.com>
Link: http://lore.kernel.org/lkml/c56be2e1-8111-9dfe-8298-f7d0f9ab7431@windriver.com
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: trivial@kernel.org
Cc: stable@kernel.org
Link: http://lore.kernel.org/lkml/20200131181123.tmamivhq4b7uqasr@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Changwei Ge authored
commit 783fda85 upstream. Linux fallocate(2) with FALLOC_FL_PUNCH_HOLE mode set, its offset can exceed the inode size. Ocfs2 now doesn't allow that offset beyond inode size. This restriction is not necessary and violates fallocate(2) semantics. If fallocate(2) offset is beyond inode size, just return success and do nothing further. Otherwise, ocfs2 will crash the kernel. kernel BUG at fs/ocfs2//alloc.c:7264! ocfs2_truncate_inline+0x20f/0x360 [ocfs2] ocfs2_remove_inode_range+0x23c/0xcb0 [ocfs2] __ocfs2_change_file_space+0x4a5/0x650 [ocfs2] ocfs2_fallocate+0x83/0xa0 [ocfs2] vfs_fallocate+0x148/0x230 SyS_fallocate+0x48/0x80 do_syscall_64+0x79/0x170 Signed-off-by:
Changwei Ge <chge@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200407082754.17565-1-chge@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Eric Biggers authored
commit 26c5d78c upstream. After request_module(), nothing is stopping the module from being unloaded until someone takes a reference to it via try_get_module(). The WARN_ONCE() in get_fs_type() is thus user-reachable, via userspace running 'rmmod' concurrently. Since WARN_ONCE() is for kernel bugs only, not for user-reachable situations, downgrade this warning to pr_warn_once(). Keep it printed once only, since the intent of this warning is to detect a bug in modprobe at boot time. Printing the warning more than once wouldn't really provide any useful extra information. Fixes: 41124db8 ("fs: warn in case userspace lied about modprobe return") Signed-off-by:
Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jessica Yu <jeyu@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: NeilBrown <neilb@suse.com>
Cc: <stable@vger.kernel.org> [4.13+]
Link: http://lkml.kernel.org/r/20200312202552.241885-3-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Qian Cai authored
commit 28936b62 upstream. inode->i_blocks could be accessed concurrently as noticed by KCSAN, BUG: KCSAN: data-race in ext4_do_update_inode [ext4] / inode_add_bytes write to 0xffff9a00d4b982d0 of 8 bytes by task 22100 on cpu 118: inode_add_bytes+0x65/0xf0 __inode_add_bytes at fs/stat.c:689 (inlined by) inode_add_bytes at fs/stat.c:702 ext4_mb_new_blocks+0x418/0xca0 [ext4] ext4_ext_map_blocks+0x1a6b/0x27b0 [ext4] ext4_map_blocks+0x1a9/0x950 [ext4] _ext4_get_block+0xfc/0x270 [ext4] ext4_get_block_unwritten+0x33/0x50 [ext4] __block_write_begin_int+0x22e/0xae0 __block_write_begin+0x39/0x50 ext4_write_begin+0x388/0xb50 [ext4] ext4_da_write_begin+0x35f/0x8f0 [ext4] generic_perform_write+0x15d/0x290 ext4_buffered_write_iter+0x11f/0x210 [ext4] ext4_file_write_iter+0xce/0x9e0 [ext4] new_sync_write+0x29c/0x3b0 __vfs_write+0x92/0xa0 vfs_write+0x103/0x260 ksys_write+0x9d/0x130 __x64_sys_write+0x4c/0x60 do_syscall_64+0x91/0xb05 entry_SYSCALL_64_after_hwframe+0x49/0xbe read to 0xffff9a00d4b982d0 of 8 bytes by task 8 on cpu 65: ext4_do_update_inode+0x4a0/0xf60 [ext4] ext4_inode_blocks_set at fs/ext4/inode.c:4815 ext4_mark_iloc_dirty+0xaf/0x160 [ext4] ext4_mark_inode_dirty+0x129/0x3e0 [ext4] ext4_convert_unwritten_extents+0x253/0x2d0 [ext4] ext4_convert_unwritten_io_end_vec+0xc5/0x150 [ext4] ext4_end_io_rsv_work+0x22c/0x350 [ext4] process_one_work+0x54f/0xb90 worker_thread+0x80/0x5f0 kthread+0x1cd/0x1f0 ret_from_fork+0x27/0x50 4 locks held by kworker/u256:0/8: #0: ffff9a025abc4328 ((wq_completion)ext4-rsv-conversion){+.+.}, at: process_one_work+0x443/0xb90 #1: ffffab5a862dbe20 ((work_completion)(&ei->i_rsv_conversion_work)){+.+.}, at: process_one_work+0x443/0xb90 #2: ffff9a025a9d0f58 (jbd2_handle){++++}, at: start_this_handle+0x1c1/0x9d0 [jbd2] #3: ffff9a00d4b985d8 (&(&ei->i_raw_lock)->rlock){+.+.}, at: ext4_do_update_inode+0xaa/0xf60 [ext4] irq event stamp: 3009267 hardirqs last enabled at (3009267): [<ffffffff980da9b7>] __find_get_block+0x107/0x790 hardirqs last disabled at (3009266): [<ffffffff980da8f9>] __find_get_block+0x49/0x790 softirqs last enabled at (3009230): [<ffffffff98a0034c>] __do_softirq+0x34c/0x57c softirqs last disabled at (3009223): [<ffffffff97cc67a2>] irq_exit+0xa2/0xc0 Reported by Kernel Concurrency Sanitizer on: CPU: 65 PID: 8 Comm: kworker/u256:0 Tainted: G L 5.6.0-rc2-next-20200221+ #7 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 Workqueue: ext4-rsv-conversion ext4_end_io_rsv_work [ext4] The plain read is outside of inode->i_lock critical section which results in a data race. Fix it by adding READ_ONCE() there. Link: https://lore.kernel.org/r/20200222043258.2279-1-cai@lca.pw Signed-off-by:
Qian Cai <cai@lca.pw>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Trond Myklebust authored
commit add42de3 upstream. When we detach a subrequest from the list, we must also release the reference it holds to the parent. Fixes: 5b2b5187 ("NFS: Fix nfs_page_group_destroy() and nfs_lock_and_join_requests() race cases") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-