- Nov 26, 2021
-
-
Nikolay Borisov authored
commit 45da9c17 upstream. Ordered work functions aren't guaranteed to be handled by the same thread which executed the normal work functions. The only way execution between normal/ordered functions is synchronized is via the WORK_DONE_BIT, unfortunately the used bitops don't guarantee any ordering whatsoever. This manifested as seemingly inexplicable crashes on ARM64, where async_chunk::inode is seen as non-null in async_cow_submit which causes submit_compressed_extents to be called and crash occurs because async_chunk::inode suddenly became NULL. The call trace was similar to: pc : submit_compressed_extents+0x38/0x3d0 lr : async_cow_submit+0x50/0xd0 sp : ffff800015d4bc20 <registers omitted for brevity> Call trace: submit_compressed_extents+0x38/0x3d0 async_cow_submit+0x50/0xd0 run_ordered_work+0xc8/0x280 btrfs_work_helper+0x98/0x250 process_one_work+0x1f0/0x4ac worker_thread+0x188/0x504 kthread+0x110/0x114 ret_from_fork+0x10/0x18 Fix this by adding respective barrier calls which ensure that all accesses preceding setting of WORK_DONE_BIT are strictly ordered before setting the flag. At the same time add a read barrier after reading of WORK_DONE_BIT in run_ordered_work which ensures all subsequent loads would be strictly ordered after reading the bit. This in turn ensures are all accesses before WORK_DONE_BIT are going to be strictly ordered before any access that can occur in ordered_func. Reported-by:
Chris Murphy <lists@colorremedies.com> Fixes: 08a9ff32 ("btrfs: Added btrfs_workqueue_struct implemented ordered execution based on kernel workqueue") CC: stable@vger.kernel.org # 4.4+ Link: https://bugzilla.redhat.com/show_bug.cgi?id=2011928 Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Tested-by:
Chris Murphy <chris@colorremedies.com> Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rustam Kovhaev authored
commit 34dbc3aa upstream. When kmemleak is enabled for SLOB, system does not boot and does not print anything to the console. At the very early stage in the boot process we hit infinite recursion from kmemleak_init() and eventually kernel crashes. kmemleak_init() specifies SLAB_NOLEAKTRACE for KMEM_CACHE(), but kmem_cache_create_usercopy() removes it because CACHE_CREATE_MASK is not valid for SLOB. Let's fix CACHE_CREATE_MASK and make kmemleak work with SLOB Link: https://lkml.kernel.org/r/20211115020850.3154366-1-rkovhaev@gmail.com Fixes: d8843922 ("slab: Ignore internal flags in cache creation") Signed-off-by:
Rustam Kovhaev <rkovhaev@gmail.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Reviewed-by:
Muchun Song <songmuchun@bytedance.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Glauber Costa <glommer@parallels.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nathan Chancellor authored
commit ffb92ce8 upstream. Patch series "Fixes for ARCH=hexagon allmodconfig", v2. This series fixes some issues noticed with ARCH=hexagon allmodconfig. This patch (of 3): When building ARCH=hexagon allmodconfig, the following errors occur: ERROR: modpost: "__raw_readsl" [drivers/i3c/master/svc-i3c-master.ko] undefined! ERROR: modpost: "__raw_writesl" [drivers/i3c/master/dw-i3c-master.ko] undefined! ERROR: modpost: "__raw_readsl" [drivers/i3c/master/dw-i3c-master.ko] undefined! ERROR: modpost: "__raw_writesl" [drivers/i3c/master/i3c-master-cdns.ko] undefined! ERROR: modpost: "__raw_readsl" [drivers/i3c/master/i3c-master-cdns.ko] undefined! Export these symbols so that modules can use them without any errors. Link: https://lkml.kernel.org/r/20211115174250.1994179-1-nathan@kernel.org Link: https://lkml.kernel.org/r/20211115174250.1994179-2-nathan@kernel.org Fixes: 013bf24c ("Hexagon: Provide basic implementation and/or stubs for I/O routines.") Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Acked-by:
Brian Cain <bcain@codeaurora.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nicolas Dichtel authored
commit a31d27fb upstream. As stated in the bonding doc, trans_start must be set manually for drivers using NETIF_F_LLTX: Drivers that use NETIF_F_LLTX flag must also update netdev_queue->trans_start. If they do not, then the ARP monitor will immediately fail any slaves using that driver, and those slaves will stay down. Link: https://www.kernel.org/doc/html/v5.15/networking/bonding.html#arp-monitor-operation Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lin Ma authored
[ Upstream commit 3e3b5dfc ] There is a potential UAF between the unregistration routine and the NFC netlink operations. The race that cause that UAF can be shown as below: (FREE) | (USE) nfcmrvl_nci_unregister_dev | nfc_genl_dev_up nci_close_device | nci_unregister_device | nfc_get_device nfc_unregister_device | nfc_dev_up rfkill_destory | device_del | rfkill_blocked ... | ... The root cause for this race is concluded below: 1. The rfkill_blocked (USE) in nfc_dev_up is supposed to be placed after the device_is_registered check. 2. Since the netlink operations are possible just after the device_add in nfc_register_device, the nfc_dev_up() can happen anywhere during the rfkill creation process, which leads to data race. This patch reorder these actions to permit 1. Once device_del is finished, the nfc_dev_up cannot dereference the rfkill object. 2. The rfkill_register need to be placed after the device_add of nfc_dev because the parent device need to be created first. So this patch keeps the order but inject device_lock to prevent the data race. Signed-off-by:
Lin Ma <linma@zju.edu.cn> Fixes: be055b2f ("NFC: RFKILL support") Reviewed-by:
Jakub Kicinski <kuba@kernel.org> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20211116152652.19217-1-linma@zju.edu.cn Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Lin Ma authored
[ Upstream commit 86cdf8e3 ] There is a possible data race as shown below: thread-A in nci_request() | thread-B in nci_close_device() | mutex_lock(&ndev->req_lock); test_bit(NCI_UP, &ndev->flags); | ... | test_and_clear_bit(NCI_UP, &ndev->flags) mutex_lock(&ndev->req_lock); | | This race will allow __nci_request() to be awaked while the device is getting removed. Similar to commit e2cb6b89 ("bluetooth: eliminate the potential race condition when removing the HCI controller"). this patch alters the function sequence in nci_request() to prevent the data races between the nci_close_device(). Signed-off-by:
Lin Ma <linma@zju.edu.cn> Fixes: 6a2968aa ("NFC: basic NCI protocol implementation") Link: https://lore.kernel.org/r/20211115145600.8320-1-linma@zju.edu.cn Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Christophe JAILLET authored
[ Upstream commit c961a7d2 ] If 'led_classdev_register()' fails, some additional resources should be released. Add the missing 'i8042_remove_filter()' and 'lis3lv02d_remove_fs()' calls that are already in the remove function but are missing here. Fixes: a4c724d0 ("platform: hp_accel: add a i8042 filter to remove HPQ6000 data from kb bus stream") Fixes: 9e0c7978 ("lis3lv02d: merge with leds hp disk") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/5a4f218f8f16d2e3a7906b7ca3654ffa946895f8.1636314074.git.christophe.jaillet@wanadoo.fr Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Randy Dunlap authored
[ Upstream commit e8f67482 ] BCM63XX selects HAVE_LEGACY_CLK but does not provide/support clk_get_parent(), so add a simple implementation of that function so that callers of it will build without errors. Fixes these build errors: mips-linux-ld: drivers/iio/adc/ingenic-adc.o: in function `jz4770_adc_init_clk_div': ingenic-adc.c:(.text+0xe4): undefined reference to `clk_get_parent' mips-linux-ld: drivers/iio/adc/ingenic-adc.o: in function `jz4725b_adc_init_clk_div': ingenic-adc.c:(.text+0x1b8): undefined reference to `clk_get_parent' Fixes: e7300d04 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs." ) Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
kernel test robot <lkp@intel.com> Suggested-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Cc: Artur Rojek <contact@artur-rojek.eu> Cc: Paul Cercueil <paul@crapouillou.net> Cc: linux-mips@vger.kernel.org Cc: Jonathan Cameron <jic23@kernel.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-iio@vger.kernel.org Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: bcm-kernel-feedback-list@broadcom.com Cc: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Pavel Skripkin authored
[ Upstream commit f8885ac8 ] Smatch says: bnx2x_init_ops.h:640 bnx2x_ilt_client_mem_op() warn: variable dereferenced before check 'ilt' (see line 638) Move ilt_cli variable initialization _after_ ilt validation, because it's unsafe to deref the pointer before validation check. Fixes: 523224a3 ("bnx2x, cnic, bnx2i: use new FW/HSI") Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Vincent Donnefort authored
[ Upstream commit 42dc938a ] Nothing protects the access to the per_cpu variable sd_llc_id. When testing the same CPU (i.e. this_cpu == that_cpu), a race condition exists with update_top_cache_domain(). One scenario being: CPU1 CPU2 ================================================================== per_cpu(sd_llc_id, CPUX) => 0 partition_sched_domains_locked() detach_destroy_domains() cpus_share_cache(CPUX, CPUX) update_top_cache_domain(CPUX) per_cpu(sd_llc_id, CPUX) => 0 per_cpu(sd_llc_id, CPUX) = CPUX per_cpu(sd_llc_id, CPUX) => CPUX return false ttwu_queue_cond() wouldn't catch smp_processor_id() == cpu and the result is a warning triggered from ttwu_queue_wakelist(). Avoid a such race in cpus_share_cache() by always returning true when this_cpu == that_cpu. Fixes: 518cd623 ("sched: Only queue remote wakeups when crossing cache boundaries") Reported-by:
Jing-Ting Wu <jing-ting.wu@mediatek.com> Signed-off-by:
Vincent Donnefort <vincent.donnefort@arm.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Valentin Schneider <valentin.schneider@arm.com> Reviewed-by:
Vincent Guittot <vincent.guittot@linaro.org> Link: https://lore.kernel.org/r/20211104175120.857087-1-vincent.donnefort@arm.com Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Randy Dunlap authored
[ Upstream commit 5eeaafc8 ] Several header files need info on CONFIG_32BIT or CONFIG_64BIT, but kconfig symbol BCM63XX does not provide that info. This leads to many build errors, e.g.: arch/mips/include/asm/page.h:196:13: error: use of undeclared identifier 'CAC_BASE' return x - PAGE_OFFSET + PHYS_OFFSET; arch/mips/include/asm/mach-generic/spaces.h:91:23: note: expanded from macro 'PAGE_OFFSET' #define PAGE_OFFSET (CAC_BASE + PHYS_OFFSET) arch/mips/include/asm/io.h:134:28: error: use of undeclared identifier 'CAC_BASE' return (void *)(address + PAGE_OFFSET - PHYS_OFFSET); arch/mips/include/asm/mach-generic/spaces.h:91:23: note: expanded from macro 'PAGE_OFFSET' #define PAGE_OFFSET (CAC_BASE + PHYS_OFFSET) arch/mips/include/asm/uaccess.h:82:10: error: use of undeclared identifier '__UA_LIMIT' return (__UA_LIMIT & (addr | (addr + size) | __ua_size(size))) == 0; Selecting the SYS_HAS_CPU_BMIPS* symbols causes SYS_HAS_CPU_BMIPS to be set, which then selects CPU_SUPPORT_32BIT_KERNEL, which causes CONFIG_32BIT to be set. (a bit more indirect than v1 [RFC].) Fixes: e7300d04 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs.") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
kernel test robot <lkp@intel.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: linux-mips@vger.kernel.org Cc: Paul Burton <paulburton@kernel.org> Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Ralf Baechle <ralf@linux-mips.org> Suggested-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Randy Dunlap authored
[ Upstream commit b929926f ] Fix this by defining both ENDIAN macros in <asm/sfp-machine.h> so that they can be utilized in <math-emu/soft-fp.h> according to the latter's comment: /* Allow sfp-machine to have its own byte order definitions. */ (This is what is done in arch/nds32/include/asm/sfp-machine.h.) This placates these build warnings: In file included from ../arch/sh/math-emu/math.c:23: .../include/math-emu/single.h:50:21: warning: "__BIG_ENDIAN" is not defined, evaluates to 0 [-Wundef] 50 | #if __BYTE_ORDER == __BIG_ENDIAN In file included from ../arch/sh/math-emu/math.c:24: .../include/math-emu/double.h:59:21: warning: "__BIG_ENDIAN" is not defined, evaluates to 0 [-Wundef] 59 | #if __BYTE_ORDER == __BIG_ENDIAN Fixes: 4b565680 ("sh: math-emu support") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Tested-by:
John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by:
Rich Felker <dalias@libc.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Randy Dunlap authored
[ Upstream commit fda1bc53 ] FRAME_POINTER depends on DEBUG_KERNEL so DWARF_UNWINDER should depend on DEBUG_KERNEL before selecting FRAME_POINTER. WARNING: unmet direct dependencies detected for FRAME_POINTER Depends on [n]: DEBUG_KERNEL [=n] && (M68K || UML || SUPERH [=y]) || ARCH_WANT_FRAME_POINTERS [=n] Selected by [y]: - DWARF_UNWINDER [=y] Fixes: bd353861 ("sh: dwarf unwinder support.") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Matt Fleming <matt@console-pimps.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Tested-by:
John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by:
Rich Felker <dalias@libc.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Lu Wei authored
[ Upstream commit bde82ee3 ] If KMEM_CACHE or maple_alloc_dev failed, the maple_bus_init() will return 0 rather than error, because the retval is not changed after KMEM_CACHE or maple_alloc_dev failed. Fixes: 17be2d2b ("sh: Add maple bus support for the SEGA Dreamcast.") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Lu Wei <luwei32@huawei.com> Acked-by:
John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by:
Rich Felker <dalias@libc.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Nick Desaulniers authored
[ Upstream commit 0e38225c ] request_irq is marked __must_check, but the call in shx3_prepare_cpus has a void return type, so it can't propagate failure to the caller. Follow cues from hexagon and just print an error. Fixes: c7936b9a ("sh: smp: Hook in to the generic IPI handler for SH-X3 SMP.") Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Paul Mundt <lethal@linux-sh.org> Reported-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Tested-by:
John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Reviewed-by:
Miguel Ojeda <ojeda@kernel.org> Signed-off-by:
Rich Felker <dalias@libc.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Michael Ellerman authored
[ Upstream commit fef071be ] In dcr-low.S we use cmpli with three arguments, instead of four arguments as defined in the ISA: cmpli cr0,r3,1024 This appears to be a PPC440-ism, looking at the "PPC440x5 CPU Core User’s Manual" it shows cmpli having no L field, but implied to be 0 due to the core being 32-bit. It mentions that the ISA defines four arguments and recommends using cmplwi. It also corresponds to the old POWER instruction set, which had no L field there, a reserved bit instead. dcr-low.S is only built 32-bit, because it is only built when DCR_NATIVE=y, which is only selected by 40x and 44x. Looking at the generated code (with gcc/gas) we see cmplwi as expected. Although gas is happy with the 3-argument version when building for 32-bit, the LLVM assembler is not and errors out with: arch/powerpc/sysdev/dcr-low.S:27:10: error: invalid operand for instruction cmpli 0,%r3,1024; ... ^ Switch to the cmplwi extended opcode, which avoids any confusion when reading the ISA, fixes the issue with the LLVM assembler, and also means the code could be built 64-bit in future (though that's very unlikely). Reported-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> BugLink: https://github.com/ClangBuiltLinux/linux/issues/1419 Link: https://lore.kernel.org/r/20211014024424.528848-1-mpe@ellerman.id.au Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Chengfeng Ye authored
[ Upstream commit a0d21bb3 ] The pointer block return from snd_gf1_dma_next_block could be null, so there is a potential null pointer dereference issue. Fix this by adding a null check before dereference. Signed-off-by:
Chengfeng Ye <cyeaa@connect.ust.hk> Link: https://lore.kernel.org/r/20211024104611.9919-1-cyeaa@connect.ust.hk Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Anatolij Gustschin authored
[ Upstream commit aed2886a ] Fixes build warnings: Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name Signed-off-by:
Anatolij Gustschin <agust@denx.de> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211013220532.24759-4-agust@denx.de Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Mike Christie authored
[ Upstream commit 1283c0d1 ] We can't free the tg_pt_gp in core_alua_set_tg_pt_gp_id() because it's still accessed via configfs. Its release must go through the normal configfs/refcount process. The max alua_tg_pt_gps_count check should probably have been done in core_alua_allocate_tg_pt_gp(), but with the current code userspace could have created 0x0000ffff + 1 groups, but only set the id for 0x0000ffff. Then it could have deleted a group with an ID set, and then set the ID for that extra group and it would work ok. It's unlikely, but just in case this patch continues to allow that type of behavior, and just fixes the kfree() while in use bug. Link: https://lore.kernel.org/r/20210930020422.92578-4-michael.christie@oracle.com Signed-off-by:
Mike Christie <michael.christie@oracle.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Mike Christie authored
[ Upstream commit ed1227e0 ] This patch fixes the following bugs: 1. If there are multiple ordered cmds queued and multiple simple cmds completing, target_restart_delayed_cmds() could be called on different CPUs and each instance could start a ordered cmd. They could then run in different orders than they were queued. 2. target_restart_delayed_cmds() and target_handle_task_attr() can race where: 1. target_handle_task_attr() has passed the simple_cmds == 0 check. 2. transport_complete_task_attr() then decrements simple_cmds to 0. 3. transport_complete_task_attr() runs target_restart_delayed_cmds() and it does not see any cmds on the delayed_cmd_list. 4. target_handle_task_attr() adds the cmd to the delayed_cmd_list. The cmd will then end up timing out. 3. If we are sent > 1 ordered cmds and simple_cmds == 0, we can execute them out of order, because target_handle_task_attr() will hit that simple_cmds check first and return false for all ordered cmds sent. 4. We run target_restart_delayed_cmds() after every cmd completion, so if there is more than 1 simple cmd running, we start executing ordered cmds after that first cmd instead of waiting for all of them to complete. 5. Ordered cmds are not supposed to start until HEAD OF QUEUE and all older cmds have completed, and not just simple. 6. It's not a bug but it doesn't make sense to take the delayed_cmd_lock for every cmd completion when ordered cmds are almost never used. Just replacing that lock with an atomic increases IOPs by up to 10% when completions are spread over multiple CPUs and there are multiple sessions/ mqs/thread accessing the same device. This patch moves the queued delayed handling to a per device work to serialze the cmd executions for each device and adds a new counter to track HEAD_OF_QUEUE and SIMPLE cmds. We can then check the new counter to determine when to run the work on the completion path. Link: https://lore.kernel.org/r/20210930020422.92578-3-michael.christie@oracle.com Signed-off-by:
Mike Christie <michael.christie@oracle.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Bart Van Assche authored
[ Upstream commit c91cf42f ] This patch fixes the following gcc 10 build error: arch/mips/sni/time.c: In function ‘a20r_set_periodic’: arch/mips/sni/time.c:15:26: error: unsigned conversion from ‘int’ to ‘u8’ {aka ‘volatile unsigned char’} changes value from ‘576’ to ‘64’ [-Werror=overflow] 15 | #define SNI_COUNTER0_DIV ((SNI_CLOCK_TICK_RATE / SNI_COUNTER2_DIV) / HZ) | ^ arch/mips/sni/time.c:21:45: note: in expansion of macro ‘SNI_COUNTER0_DIV’ 21 | *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV; | ^~~~~~~~~~~~~~~~ Cc: linux-mips@vger.kernel.org Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Guanghui Feng authored
[ Upstream commit 3968ddcf ] When running ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup, which look like this one: Workqueue: events_unbound flush_to_ldisc Call trace: dump_backtrace+0x0/0x1ec show_stack+0x24/0x30 dump_stack+0xd0/0x128 panic+0x15c/0x374 watchdog_timer_fn+0x2b8/0x304 __run_hrtimer+0x88/0x2c0 __hrtimer_run_queues+0xa4/0x120 hrtimer_interrupt+0xfc/0x270 arch_timer_handler_phys+0x40/0x50 handle_percpu_devid_irq+0x94/0x220 __handle_domain_irq+0x88/0xf0 gic_handle_irq+0x84/0xfc el1_irq+0xc8/0x180 slip_unesc+0x80/0x214 [slip] tty_ldisc_receive_buf+0x64/0x80 tty_port_default_receive_buf+0x50/0x90 flush_to_ldisc+0xbc/0x110 process_one_work+0x1d4/0x4b0 worker_thread+0x180/0x430 kthread+0x11c/0x120 In the testcase pty04, The first process call the write syscall to send data to the pty master. At the same time, the workqueue will do the flush_to_ldisc to pop data in a loop until there is no more data left. When the sender and workqueue running in different core, the sender sends data fastly in full time which will result in workqueue doing work in loop for a long time and occuring softlockup in flush_to_ldisc with kernel configured without preempt. So I add need_resched check and cond_resched in the flush_to_ldisc loop to avoid it. Signed-off-by:
Guanghui Feng <guanghuifeng@linux.alibaba.com> Link: https://lore.kernel.org/r/1633961304-24759-1-git-send-email-guanghuifeng@linux.alibaba.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yang Yingliang authored
[ Upstream commit 9eff2b2e ] It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20211011134920.118477-1-yangyingliang@huawei.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Roger Quadros authored
[ Upstream commit 51b9e22f ] gpmc,mux-add-data is not boolean. Fixes the below errors flagged by dtbs_check. "ethernet@4,0:gpmc,mux-add-data: True is not of type 'array'" Signed-off-by:
Roger Quadros <rogerq@kernel.org> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Guo Zhi authored
[ Upstream commit d4996c6e ] Pointers should be printed with %p or %px rather than cast to 'unsigned long' and printed with %lx. Change %lx to %p to print the hashed pointer. Link: https://lore.kernel.org/r/20210929122538.1158235-1-qtxuning1999@sjtu.edu.cn Signed-off-by:
Guo Zhi <qtxuning1999@sjtu.edu.cn> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yang Yingliang authored
[ Upstream commit 14651496 ] It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20210915034925.2399823-1-yangyingliang@huawei.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
James Smart authored
[ Upstream commit 99154581 ] When parsing the txq list in lpfc_drain_txq(), the driver attempts to pass the requests to the adapter. If such an attempt fails, a local "fail_msg" string is set and a log message output. The job is then added to a completions list for cancellation. Processing of any further jobs from the txq list continues, but since "fail_msg" remains set, jobs are added to the completions list regardless of whether a wqe was passed to the adapter. If successfully added to txcmplq, jobs are added to both lists resulting in list corruption. Fix by clearing the fail_msg string after adding a job to the completions list. This stops the subsequent jobs from being added to the completions list unless they had an appropriate failure. Link: https://lore.kernel.org/r/20210910233159.115896-2-jsmart2021@gmail.com Co-developed-by:
Justin Tee <justin.tee@broadcom.com> Signed-off-by:
Justin Tee <justin.tee@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Pavel Skripkin authored
commit 6f68cd63 upstream. Syzbot reported ODEBUG warning in batadv_nc_mesh_free(). The problem was in wrong error handling in batadv_mesh_init(). Before this patch batadv_mesh_init() was calling batadv_mesh_free() in case of any batadv_*_init() calls failure. This approach may work well, when there is some kind of indicator, which can tell which parts of batadv are initialized; but there isn't any. All written above lead to cleaning up uninitialized fields. Even if we hide ODEBUG warning by initializing bat_priv->nc.work, syzbot was able to hit GPF in batadv_nc_purge_paths(), because hash pointer in still NULL. [1] To fix these bugs we can unwind batadv_*_init() calls one by one. It is good approach for 2 reasons: 1) It fixes bugs on error handling path 2) It improves the performance, since we won't call unneeded batadv_*_free() functions. So, this patch makes all batadv_*_init() clean up all allocated memory before returning with an error to no call correspoing batadv_*_free() and open-codes batadv_mesh_free() with proper order to avoid touching uninitialized fields. Link: https://lore.kernel.org/netdev/000000000000c87fbd05cef6bcb0@google.com/ [1] Reported-and-tested-by:
<syzbot+28b0702ada0bf7381f58@syzkaller.appspotmail.com> Fixes: c6c8fea2 ("net: Add batman-adv meshing protocol") Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Acked-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Gleixner authored
commit 37354590 upstream. free_msi_irqs() frees the MSI entries before destroying the sysfs entries which are exposing them. Nothing prevents a concurrent free while a sysfs file is read and accesses the possibly freed entry. Move the sysfs release ahead of freeing the entries. Fixes: 1c51b50c ("PCI/MSI: Export MSI mode using attributes, not kobjects") Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Bjorn Helgaas <helgaas@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87sfw5305m.ffs@tglx Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sven Schnelle authored
commit 3ec18fc7 upstream. commit 8779e05b ("parisc: Fix ptrace check on syscall return") fixed testing of TI_FLAGS. This uncovered a bug in the test mask. syscall_restore_rfi is only used when the kernel needs to exit to usespace with single or block stepping and the recovery counter enabled. The test however used _TIF_SYSCALL_TRACE_MASK, which includes a lot of bits that shouldn't be tested here. Fix this by using TIF_SINGLESTEP and TIF_BLOCKSTEP directly. I encountered this bug by enabling syscall tracepoints. Both in qemu and on real hardware. As soon as i enabled the tracepoint (sys_exit_read, but i guess it doesn't really matter which one), i got random page faults in userspace almost immediately. Signed-off-by:
Sven Schnelle <svens@stackframe.org> Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pali Rohár authored
commit 460275f1 upstream. Define a macro PCI_EXP_DEVCTL_PAYLOAD_* for every possible Max Payload Size in linux/pci_regs.h, in the same style as PCI_EXP_DEVCTL_READRQ_*. Link: https://lore.kernel.org/r/20211005180952.6812-2-kabel@kernel.org Signed-off-by:
Pali Rohár <pali@kernel.org> Signed-off-by:
Marek Behún <kabel@kernel.org> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by:
Marek Behún <kabel@kernel.org> Reviewed-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vasily Averin authored
commit 0b28179a upstream. Patch series "memcg: prohibit unconditional exceeding the limit of dying tasks", v3. Memory cgroup charging allows killed or exiting tasks to exceed the hard limit. It can be misused and allowed to trigger global OOM from inside a memcg-limited container. On the other hand if memcg fails allocation, called from inside #PF handler it triggers global OOM from inside pagefault_out_of_memory(). To prevent these problems this patchset: (a) removes execution of out_of_memory() from pagefault_out_of_memory(), becasue nobody can explain why it is necessary. (b) allow memcg to fail allocation of dying/killed tasks. This patch (of 3): Any allocation failure during the #PF path will return with VM_FAULT_OOM which in turn results in pagefault_out_of_memory which in turn executes out_out_memory() and can kill a random task. An allocation might fail when the current task is the oom victim and there are no memory reserves left. The OOM killer is already handled at the page allocator level for the global OOM and at the charging level for the memcg one. Both have much more information about the scope of allocation/charge request. This means that either the OOM killer has been invoked properly and didn't lead to the allocation success or it has been skipped because it couldn't have been invoked. In both cases triggering it from here is pointless and even harmful. It makes much more sense to let the killed task die rather than to wake up an eternally hungry oom-killer and send him to choose a fatter victim for breakfast. Link: https://lkml.kernel.org/r/0828a149-786e-7c06-b70a-52d086818ea3@virtuozzo.com Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Suggested-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Uladzislau Rezki <urezki@gmail.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
commit 418ace99 upstream. Naresh and Antonio ran into a build failure with latest Debian armhf compilers, with lots of output like tmp/ccY3nOAs.s:2215: Error: selected processor does not support `cpsid i' in ARM mode As it turns out, $(cc-option) fails early here when the FPU is not selected before CPU architecture is selected, as the compiler option check runs before enabling -msoft-float, which causes a problem when testing a target architecture level without an FPU: cc1: error: '-mfloat-abi=hard': selected architecture lacks an FPU Passing e.g. -march=armv6k+fp in place of -march=armv6k would avoid this issue, but the fallback logic is already broken because all supported compilers (gcc-5 and higher) are much more recent than these options, and building with -march=armv5t as a fallback no longer works. The best way forward that I see is to just remove all the checks, which also has the nice side-effect of slightly improving the startup time for 'make'. The -mtune=marvell-f option was apparently never supported by any mainline compiler, and the custom Codesourcery gcc build that did support is now too old to build kernels, so just use -mtune=xscale unconditionally for those. This should be safe to apply on all stable kernels, and will be required in order to keep building them with gcc-11 and higher. Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=996419 Reported-by:
Antonio Terceiro <antonio.terceiro@linaro.org> Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Reported-by:
Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Tested-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by:
Klaus Kudielka <klaus.kudielka@gmail.com> Cc: Matthias Klose <doko@debian.org> Cc: stable@vger.kernel.org Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 9aaa81c3 upstream. Chipidea core was calling the interrupt handler from non-IRQ context with interrupts enabled, something which can lead to a deadlock if there's an actual interrupt trying to take a lock that's already held (e.g. the controller lock in udc_irq()). Add a wrapper that can be used to fake interrupts instead of calling the handler directly. Fixes: 3ecb3e09 ("usb: chipidea: Use extcon framework for VBUS and ID detect") Fixes: 876d4e1e ("usb: chipidea: core: add wakeup support for extcon") Cc: Peter Chen <peter.chen@kernel.org> Cc: stable@vger.kernel.org # 4.4 Signed-off-by:
Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211021083447.20078-1-johan@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eiichi Tsukata authored
[ Upstream commit c7cd82b9 ] Currently vosck_connect() increments sock refcount for nonblocking socket each time it's called, which can lead to memory leak if it's called multiple times because connect timeout function decrements sock refcount only once. Fixes it by making vsock_connect() return -EALREADY immediately when sock state is already SS_CONNECTING. Fixes: d021c344 ("VSOCK: Introduce VM Sockets") Reviewed-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
Eiichi Tsukata <eiichi.tsukata@nutanix.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Chengfeng Ye authored
[ Upstream commit 9fec40f8 ] skb is already freed by dev_kfree_skb in pn533_fill_fragment_skbs, but follow error handler branch when pn533_fill_fragment_skbs() fails, skb is freed again, results in double free issue. Fix this by not free skb in error path of pn533_fill_fragment_skbs. Fixes: 963a82e0 ("NFC: pn533: Split large Tx frames in chunks") Fixes: 93ad4202 ("NFC: pn533: Target mode Tx fragmentation support") Signed-off-by:
Chengfeng Ye <cyeaa@connect.ust.hk> Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Eric Dumazet authored
[ Upstream commit 8ac9dfd5 ] Both ifindex and LLC_SK_DEV_HASH_ENTRIES are signed. This means that (ifindex % LLC_SK_DEV_HASH_ENTRIES) is negative if @ifindex is negative. We could simply make LLC_SK_DEV_HASH_ENTRIES unsigned. In this patch I chose to use hash_32() to get more entropy from @ifindex, like llc_sk_laddr_hashfn(). UBSAN: array-index-out-of-bounds in ./include/net/llc.h:75:26 index -43 is out of range for type 'hlist_head [64]' CPU: 1 PID: 20999 Comm: syz-executor.3 Not tainted 5.15.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 ubsan_epilogue+0xb/0x5a lib/ubsan.c:151 __ubsan_handle_out_of_bounds.cold+0x62/0x6c lib/ubsan.c:291 llc_sk_dev_hash include/net/llc.h:75 [inline] llc_sap_add_socket+0x49c/0x520 net/llc/llc_conn.c:697 llc_ui_bind+0x680/0xd70 net/llc/af_llc.c:404 __sys_bind+0x1e9/0x250 net/socket.c:1693 __do_sys_bind net/socket.c:1704 [inline] __se_sys_bind net/socket.c:1702 [inline] __x64_sys_bind+0x6f/0xb0 net/socket.c:1702 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fa503407ae9 Fixes: 6d2e3ea2 ("llc: use a device based hash table to speed up multicast delivery") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Huang Guobin authored
[ Upstream commit b93c6a91 ] When I do fuzz test for bonding device interface, I got the following use-after-free Calltrace: ================================================================== BUG: KASAN: use-after-free in bond_enslave+0x1521/0x24f0 Read of size 8 at addr ffff88825bc11c00 by task ifenslave/7365 CPU: 5 PID: 7365 Comm: ifenslave Tainted: G E 5.15.0-rc1+ #13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 Call Trace: dump_stack_lvl+0x6c/0x8b print_address_description.constprop.0+0x48/0x70 kasan_report.cold+0x82/0xdb __asan_load8+0x69/0x90 bond_enslave+0x1521/0x24f0 bond_do_ioctl+0x3e0/0x450 dev_ifsioc+0x2ba/0x970 dev_ioctl+0x112/0x710 sock_do_ioctl+0x118/0x1b0 sock_ioctl+0x2e0/0x490 __x64_sys_ioctl+0x118/0x150 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f19159cf577 Code: b3 66 90 48 8b 05 11 89 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 78 RSP: 002b:00007ffeb3083c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffeb3084bca RCX: 00007f19159cf577 RDX: 00007ffeb3083ce0 RSI: 0000000000008990 RDI: 0000000000000003 RBP: 00007ffeb3084bc4 R08: 0000000000000040 R09: 0000000000000000 R10: 00007ffeb3084bc0 R11: 0000000000000246 R12: 00007ffeb3083ce0 R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffeb3083cb0 Allocated by task 7365: kasan_save_stack+0x23/0x50 __kasan_kmalloc+0x83/0xa0 kmem_cache_alloc_trace+0x22e/0x470 bond_enslave+0x2e1/0x24f0 bond_do_ioctl+0x3e0/0x450 dev_ifsioc+0x2ba/0x970 dev_ioctl+0x112/0x710 sock_do_ioctl+0x118/0x1b0 sock_ioctl+0x2e0/0x490 __x64_sys_ioctl+0x118/0x150 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Freed by task 7365: kasan_save_stack+0x23/0x50 kasan_set_track+0x20/0x30 kasan_set_free_info+0x24/0x40 __kasan_slab_free+0xf2/0x130 kfree+0xd1/0x5c0 slave_kobj_release+0x61/0x90 kobject_put+0x102/0x180 bond_sysfs_slave_add+0x7a/0xa0 bond_enslave+0x11b6/0x24f0 bond_do_ioctl+0x3e0/0x450 dev_ifsioc+0x2ba/0x970 dev_ioctl+0x112/0x710 sock_do_ioctl+0x118/0x1b0 sock_ioctl+0x2e0/0x490 __x64_sys_ioctl+0x118/0x150 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Last potentially related work creation: kasan_save_stack+0x23/0x50 kasan_record_aux_stack+0xb7/0xd0 insert_work+0x43/0x190 __queue_work+0x2e3/0x970 delayed_work_timer_fn+0x3e/0x50 call_timer_fn+0x148/0x470 run_timer_softirq+0x8a8/0xc50 __do_softirq+0x107/0x55f Second to last potentially related work creation: kasan_save_stack+0x23/0x50 kasan_record_aux_stack+0xb7/0xd0 insert_work+0x43/0x190 __queue_work+0x2e3/0x970 __queue_delayed_work+0x130/0x180 queue_delayed_work_on+0xa7/0xb0 bond_enslave+0xe25/0x24f0 bond_do_ioctl+0x3e0/0x450 dev_ifsioc+0x2ba/0x970 dev_ioctl+0x112/0x710 sock_do_ioctl+0x118/0x1b0 sock_ioctl+0x2e0/0x490 __x64_sys_ioctl+0x118/0x150 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff88825bc11c00 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 0 bytes inside of 1024-byte region [ffff88825bc11c00, ffff88825bc12000) The buggy address belongs to the page: page:ffffea00096f0400 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x25bc10 head:ffffea00096f0400 order:3 compound_mapcount:0 compound_pincount:0 flags: 0x57ff00000010200(slab|head|node=1|zone=2|lastcpupid=0x7ff) raw: 057ff00000010200 ffffea0009a71c08 ffff888240001968 ffff88810004dbc0 raw: 0000000000000000 00000000000a000a 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88825bc11b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88825bc11b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88825bc11c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88825bc11c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88825bc11d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Put new_slave in bond_sysfs_slave_add() will cause use-after-free problems when new_slave is accessed in the subsequent error handling process. Since new_slave will be put in the subsequent error handling process, remove the unnecessary put to fix it. In addition, when sysfs_create_file() fails, if some files have been crea- ted successfully, we need to call sysfs_remove_file() to remove them. Since there are sysfs_create_files() & sysfs_remove_files() can be used, use these two functions instead. Fixes: 7afcaec4 (bonding: use kobject_put instead of _del after kobject_add) Signed-off-by:
Huang Guobin <huangguobin4@huawei.com> Reviewed-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Maxim Kiselev authored
[ Upstream commit d52bcb47 ] This patch allows to use 0 for `coal->rx_coalesce_usecs` param to disable rx irq coalescing. Previously we could enable rx irq coalescing via ethtool (For ex: `ethtool -C eth0 rx-usecs 2000`) but we couldn't disable it because this part rejects 0 value: if (!coal->rx_coalesce_usecs) return -EINVAL; Fixes: 84da2658 ("TI DaVinci EMAC : Implement interrupt pacing functionality.") Signed-off-by:
Maxim Kiselev <bigunclemax@gmail.com> Reviewed-by:
Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lore.kernel.org/r/20211101152343.4193233-1-bigunclemax@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
YueHaibing authored
[ Upstream commit 4745ea26 ] Return NULL instead of passing to ERR_PTR while err is zero, this fix smatch warnings: drivers/xen/xen-pciback/conf_space_capability.c:163 pm_ctrl_init() warn: passing zero to 'ERR_PTR' Fixes: a92336a1 ("xen/pciback: Drop two backends, squash and cleanup some code.") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20211008074417.8260-1-yuehaibing@huawei.com Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-