- Apr 14, 2021
-
-
Potnuri Bharat Teja authored
[ Upstream commit 603c4690 ] ipv6 bit is wrongly set by the below which causes fatal adapter lookup engine errors for ipv4 connections while destroying a listener. Fix it to properly check the local address for ipv6. Fixes: 3408be14 ("RDMA/cxgb4: Fix adapter LE hash errors while destroying ipv6 listening server") Link: https://lore.kernel.org/r/20210331135715.30072-1-bharat@chelsio.com Signed-off-by:
Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Aya Levin authored
[ Upstream commit 534b1204 ] Add reserved mapping to cover all the register in order to avoid setting arbitrary values to newer FW which implements the reserved fields. Fixes: 50b4a3c2 ("net/mlx5: PPTB and PBMC register firmware command support") Signed-off-by:
Aya Levin <ayal@nvidia.com> Reviewed-by:
Moshe Shemesh <moshe@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Aya Levin authored
[ Upstream commit ce28f0fd ] Add reserved mapping to cover all the register in order to avoid setting arbitrary values to newer FW which implements the reserved fields. Fixes: a58837f5 ("net/mlx5e: Expose FEC feilds and related capability bit") Signed-off-by:
Aya Levin <ayal@nvidia.com> Reviewed-by:
Moshe Shemesh <moshe@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Raed Salem authored
[ Upstream commit a14587df ] The cited commit wrongly placed log_max_flow_counter field of mlx5_ifc_flow_table_prop_layout_bits, align it to the HW spec intended placement. Fixes: 16f1c5bb ("net/mlx5: Check device capability for maximum flow counters") Signed-off-by:
Raed Salem <raeds@nvidia.com> Reviewed-by:
Roi Dayan <roid@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Eli Cohen authored
[ Upstream commit 1a73704c ] Make sure to modify uplink port to follow only if the uplink_follow capability is set as required by the HW spec. Failure to do so causes traffic to the uplink representor net device to cease after switching to switchdev mode. Fixes: 7d0314b1 ("net/mlx5e: Modify uplink state on interface up/down") Signed-off-by:
Eli Cohen <elic@nvidia.com> Reviewed-by:
Roi Dayan <roid@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Guangbin Huang authored
[ Upstream commit ed7bedd2 ] Currently, the VF down state bit is cleared after VF sending link status request command. There is problem that when VF gets link status replied from PF, the down state bit may still set as 1. In this case, the link status replied from PF will be ignored and always set VF link status to down. To fix this problem, clear VF down state bit before VF requests link status. Fixes: e2cb1dec ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Xin Long authored
[ Upstream commit 2a2403ca ] Li Shuang found a NULL pointer dereference crash in her testing: [] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [] RIP: 0010:tipc_crypto_rcv_complete+0xc8/0x7e0 [tipc] [] Call Trace: [] <IRQ> [] tipc_crypto_rcv+0x2d9/0x8f0 [tipc] [] tipc_rcv+0x2fc/0x1120 [tipc] [] tipc_udp_recv+0xc6/0x1e0 [tipc] [] udpv6_queue_rcv_one_skb+0x16a/0x460 [] udp6_unicast_rcv_skb.isra.35+0x41/0xa0 [] ip6_protocol_deliver_rcu+0x23b/0x4c0 [] ip6_input+0x3d/0xb0 [] ipv6_rcv+0x395/0x510 [] __netif_receive_skb_core+0x5fc/0xc40 This is caused by NULL returned by tipc_aead_get(), and then crashed when dereferencing it later in tipc_crypto_rcv_complete(). This might happen when tipc_crypto_rcv_complete() is called by two threads at the same time: the tmp attached by tipc_crypto_key_attach() in one thread may be released by the one attached by that in the other thread. This patch is to fix it by incrementing the tmp's refcnt before attaching it instead of calling tipc_aead_get() after attaching it. Fixes: fc1b6d6d ("tipc: introduce TIPC encryption & authentication") Reported-by:
Li Shuang <shuali@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Hans de Goede authored
[ Upstream commit a3790a8a ] Some devices send (duplicate) tablet-mode events when moved around even though the mode has not changed; and they do this even when suspended. Change the tablet-mode event handling when priv->wakeup_mode is set to update the switch state in case it changed and then return immediately (without calling pm_wakeup_hard_event()) to avoid spurious wakeups. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212537 Fixes: 537b0dd4 ("platform/x86: intel-hid: Add support for SW_TABLET_MODE") Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Elia Devito <eliadevito@gmail.com> Link: https://lore.kernel.org/r/20210404143831.25173-1-hdegoede@redhat.com Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Marc Kleine-Budde authored
[ Upstream commit 617085fc ] Some SPI host controllers do not support full-duplex SPI transfers. The function mcp251x_spi_trans() does a full duplex transfer. It is used in several places in the driver, where a TX half duplex transfer is sufficient. To fix support for half duplex SPI host controllers, this patch introduces a new function mcp251x_spi_write() and changes all callers that do a TX half duplex transfer to use mcp251x_spi_write(). Fixes: e0e25001 ("can: mcp251x: add support for half duplex controllers") Link: https://lore.kernel.org/r/20210330100246.1074375-1-mkl@pengutronix.de Cc: Tim Harvey <tharvey@gateworks.com> Tested-By:
Tim Harvey <tharvey@gateworks.com> Reported-by:
Gerhard Bertelsmann <info@gerhard-bertelsmann.de> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Luca Coelho authored
[ Upstream commit 07cc40fe ] When version 2 of the regulatory capability flags API was implemented, the flag to disable 11ax was defined as bit 13, but this was later changed and the bit remained as bit 10, like in version 1. This was never changed in the driver, so we were checking for the wrong bit in newer devices. Fix it. Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Fixes: e27c506a ("iwlwifi: regulatory: regulatory capabilities api change") Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210326125611.6d28516b59cd.Id0248d5e4662695254f49ce37b0268834ed52918@changeid Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Andy Shevchenko authored
[ Upstream commit 5e729bc5 ] When hardware doesn't support High Speed Mode, we forget bus_freq_hz timing adjustment. This makes the timings and real registers being unsynchronized. Adjust bus_freq_hz when refuse high speed mode set. Fixes: b6e67145 ("i2c: designware: Enable high speed mode") Reported-by:
"Song Bao Hua (Barry Song)" <song.bao.hua@hisilicon.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Barry Song <song.bao.hua@hisilicon.com> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ilya Maximets authored
[ Upstream commit 4d51419d ] 'struct ovs_zone_limit' has more members than initialized in ovs_ct_limit_get_default_limit(). The rest of the memory is a random kernel stack content that ends up being sent to userspace. Fix that by using designated initializer that will clear all non-specified fields. Fixes: 11efd5cb ("openvswitch: Support conntrack zone limit") Signed-off-by:
Ilya Maximets <i.maximets@ovn.org> Acked-by:
Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Adrian Hunter authored
[ Upstream commit 026334a3 ] Since commit 14d3d540 ("perf session: Try to read pipe data from file") 'perf inject' has started printing "PERFILE2h" when not processing pipes. The commit exposed perf to the possiblity that the input is not a pipe but the 'repipe' parameter gets used. That causes the printing because perf inject sets 'repipe' to true always. The 'repipe' parameter of perf_session__new() is used by 2 functions: - perf_file_header__read_pipe() - trace_report() In both cases, the functions copy data to STDOUT_FILENO when 'repipe' is true. Fix by setting 'repipe' to true only if the output is a pipe. Fixes: e558a5bd ("perf inject: Work with files") Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Acked-by:
Jiri Olsa <jolsa@redhat.com> Cc: Andrew Vagin <avagin@openvz.org> Link: http://lore.kernel.org/lkml/20210401103605.9000-1-adrian.hunter@intel.com Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Alexander Gordeev authored
[ Upstream commit 7a2f9144 ] Register variables initialized using arithmetic. That leads to kasan instrumentaton code corrupting the registers contents. Follow GCC guidlines and use temporary variables for assigning init values to register variables. Fixes: 94c12cc7 ("[S390] Inline assembly cleanup.") Signed-off-by:
Alexander Gordeev <agordeev@linux.ibm.com> Acked-by:
Ilya Leoshkevich <iii@linux.ibm.com> Link: https://gcc.gnu.org/onlinedocs/gcc-10.2.0/gcc/Local-Register-Variables.html Signed-off-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Zqiang authored
[ Upstream commit 0687c66b ] The debug_work_activate() is called on the premise that the work can be inserted, because if wq be in WQ_DRAINING status, insert work may be failed. Fixes: e41e704b ("workqueue: improve destroy_workqueue() debuggability") Signed-off-by:
Zqiang <qiang.zhang@windriver.com> Reviewed-by:
Lai Jiangshan <jiangshanlai@gmail.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Lukasz Bartosik authored
[ Upstream commit 70454655 ] Fix invalid usage of a list_for_each_entry cursor in clk_notifier_unregister(). When list is empty or if the list is completely traversed (without breaking from the loop on one of the entries) then the list cursor does not point to a valid entry and therefore should not be used. The patch fixes a logical bug that hasn't been seen in pratice however it is analogus to the bug fixed in clk_notifier_register(). The issue was dicovered when running 5.12-rc1 kernel on x86_64 with KASAN enabled: BUG: KASAN: global-out-of-bounds in clk_notifier_register+0xab/0x230 Read of size 8 at addr ffffffffa0d10588 by task swapper/0/1 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1 #1 Hardware name: Google Caroline/Caroline, BIOS Google_Caroline.7820.430.0 07/20/2018 Call Trace: dump_stack+0xee/0x15c print_address_description+0x1e/0x2dc kasan_report+0x188/0x1ce ? clk_notifier_register+0xab/0x230 ? clk_prepare_lock+0x15/0x7b ? clk_notifier_register+0xab/0x230 clk_notifier_register+0xab/0x230 dw8250_probe+0xc01/0x10d4 ... Memory state around the buggy address: ffffffffa0d10480: 00 00 00 00 00 03 f9 f9 f9 f9 f9 f9 00 00 00 00 ffffffffa0d10500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f9 f9 >ffffffffa0d10580: f9 f9 f9 f9 00 00 00 00 00 00 00 00 00 00 00 00 ^ ffffffffa0d10600: 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9 00 00 00 00 ffffffffa0d10680: 00 00 00 00 00 00 00 00 f9 f9 f9 f9 00 00 00 00 ================================================================== Fixes: b2476490 ("clk: introduce the common clock framework") Reported-by:
Lukasz Majczak <lma@semihalf.com> Signed-off-by:
Lukasz Bartosik <lb@semihalf.com> Link: https://lore.kernel.org/r/20210401225149.18826-2-lb@semihalf.com Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Lukasz Bartosik authored
[ Upstream commit 8d3c0c01 ] Fix invalid usage of a list_for_each_entry cursor in clk_notifier_register(). When list is empty or if the list is completely traversed (without breaking from the loop on one of the entries) then the list cursor does not point to a valid entry and therefore should not be used. The issue was dicovered when running 5.12-rc1 kernel on x86_64 with KASAN enabled: BUG: KASAN: global-out-of-bounds in clk_notifier_register+0xab/0x230 Read of size 8 at addr ffffffffa0d10588 by task swapper/0/1 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1 #1 Hardware name: Google Caroline/Caroline, BIOS Google_Caroline.7820.430.0 07/20/2018 Call Trace: dump_stack+0xee/0x15c print_address_description+0x1e/0x2dc kasan_report+0x188/0x1ce ? clk_notifier_register+0xab/0x230 ? clk_prepare_lock+0x15/0x7b ? clk_notifier_register+0xab/0x230 clk_notifier_register+0xab/0x230 dw8250_probe+0xc01/0x10d4 ... Memory state around the buggy address: ffffffffa0d10480: 00 00 00 00 00 03 f9 f9 f9 f9 f9 f9 00 00 00 00 ffffffffa0d10500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f9 f9 >ffffffffa0d10580: f9 f9 f9 f9 00 00 00 00 00 00 00 00 00 00 00 00 ^ ffffffffa0d10600: 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9 00 00 00 00 ffffffffa0d10680: 00 00 00 00 00 00 00 00 f9 f9 f9 f9 00 00 00 00 ================================================================== Fixes: b2476490 ("clk: introduce the common clock framework") Reported-by:
Lukasz Majczak <lma@semihalf.com> Signed-off-by:
Lukasz Bartosik <lb@semihalf.com> Link: https://lore.kernel.org/r/20210401225149.18826-1-lb@semihalf.com Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Claudiu Beznea authored
[ Upstream commit a14d273b ] Restore CMP screener registers on resume path. Fixes: c1e85c6c ("net: macb: save/restore the remaining registers and features") Signed-off-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yunjian Wang authored
[ Upstream commit 990b03b0 ] The 'unlocked_driver_cb' struct field in 'bo' is not being initialized in tcf_block_offload_init(). The uninitialized 'unlocked_driver_cb' will be used when calling unlocked_driver_cb(). So initialize 'bo' to zero to avoid the issue. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: 0fdcf78d ("net: use flow_indr_dev_setup_offload()") Signed-off-by:
Yunjian Wang <wangyunjian@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Rui Salvaterra authored
[ Upstream commit 5b2c7e0a ] Hardware buffer management has never worked on the Turris Omnia, as the required MBus window hadn't been reserved. Fix thusly. Fixes: 018b88ee ("ARM: dts: turris-omnia: enable HW buffer management") Signed-off-by:
Rui Salvaterra <rsalvaterra@gmail.com> Reviewed-by:
Marek Behún <kabel@kernel.org> Tested-by:
Klaus Kudielka <klaus.kudielka@gmail.com> Signed-off-by:
Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Gregory CLEMENT authored
[ Upstream commit 967ff33e ] The driver part of this support was not merged which leads to break AHCI on all Marvell Armada 7k8k / CN913x platforms as it was reported by Marcin Wojtas. So for now let's remove it in order to fix the issue waiting for the driver part really be merged. This reverts commit 53e950d5. Fixes: 53e950d5 ("arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts") Signed-off-by:
Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Kalyan Thota authored
[ Upstream commit 12aca1ce ] Update the 3d merge as active in the data path only if the hw block is selected in the configuration. Reported-by:
Stephen Boyd <swboyd@chromium.org> Fixes: 73bfb790 ("msm:disp:dpu1: setup display datapath for SC7180 target") Signed-off-by:
Kalyan Thota <kalyan_t@codeaurora.org> Message-Id: <1617364493-13518-1-git-send-email-kalyan_t@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@chromium.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Dmitry Baryshkov authored
[ Upstream commit 6ddbfa1f ] I suppose the microcode version check for a650 is incorrect. It checks for the version 1.95, while the firmware released have major version of 0: 0.91 (vulnerable), 0.99 (fixing the issue). Lower version requirements to accept firmware 0.99. Fixes: 8490f02a ("drm/msm: a6xx: Make sure the SQE microcode is safe") Cc: Akhil P Oommen <akhilpo@codeaurora.org> Cc: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by:
Jordan Crouse <jordan@cosmicpenguin.net> Message-Id: <20210331140223.3771449b -1-dmitry.baryshkov@linaro.org> Signed-off-by:
Rob Clark <robdclark@chromium.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Can Guo authored
[ Upstream commit 4b42d557 ] In __ufshcd_issue_tm_cmd(), it is not correct to use hba->nutrs + req->tag as the Task Tag in a TMR UPIU. Directly use req->tag as the Task Tag. Fixes: e2933132 ("scsi: ufs: Fix broken task management command implementation") Link: https://lore.kernel.org/r/1617262750-4864-3-git-send-email-cang@codeaurora.org Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Can Guo <cang@codeaurora.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Can Guo authored
[ Upstream commit 1235fc56 ] ufshcd_tmc_handler() calls blk_mq_tagset_busy_iter(fn = ufshcd_compl_tm()), but since blk_mq_tagset_busy_iter() only iterates over all reserved tags and requests which are not in IDLE state, ufshcd_compl_tm() never gets a chance to run. Thus, TMR always ends up with completion timeout. Fix it by calling blk_mq_start_request() in __ufshcd_issue_tm_cmd(). Link: https://lore.kernel.org/r/1617262750-4864-2-git-send-email-cang@codeaurora.org Fixes: 69a6c269 ("scsi: ufs: Use blk_{get,put}_request() to allocate and free TMFs") Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Can Guo <cang@codeaurora.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Paolo Abeni authored
[ Upstream commit 0a3cc579 ] This change reverts commit ad98dd37 ("mptcp: provide subflow aware release function"). The latter introduced a deadlock spotted by syzkaller and is not needed anymore after the previous commit. Fixes: ad98dd37 ("mptcp: provide subflow aware release function") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Paolo Abeni authored
[ Upstream commit 86581852 ] Unrolling mcast state at msk dismantel time is bug prone, as syzkaller reported: ====================================================== WARNING: possible circular locking dependency detected 5.11.0-syzkaller #0 Not tainted ------------------------------------------------------ syz-executor905/8822 is trying to acquire lock: ffffffff8d678fe8 (rtnl_mutex){+.+.}-{3:3}, at: ipv6_sock_mc_close+0xd7/0x110 net/ipv6/mcast.c:323 but task is already holding lock: ffff888024390120 (sk_lock-AF_INET6){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1600 [inline] ffff888024390120 (sk_lock-AF_INET6){+.+.}-{0:0}, at: mptcp6_release+0x57/0x130 net/mptcp/protocol.c:3507 which lock already depends on the new lock. Instead we can simply forbit any mcast-related setsockopt Fixes: 717e79c8 ("mptcp: Add setsockopt()/getsockopt() socket operations") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Norman Maurer authored
[ Upstream commit 98184612 ] Support for UDP_GRO was added in the past but the implementation for getsockopt was missed which did lead to an error when we tried to retrieve the setting for UDP_GRO. This patch adds the missing switch case for UDP_GRO Fixes: e20cf8d3 ("udp: implement GRO for plain UDP sockets.") Signed-off-by:
Norman Maurer <norman_maurer@apple.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Stephen Boyd authored
[ Upstream commit 5620b135 ] We should set the platform device's driver data to NULL here so that code doesn't assume the struct drm_device pointer is valid when it could have been destroyed. The lifetime of this pointer is managed by a kref but when msm_drm_init() fails we call drm_dev_put() on the pointer which will free the pointer's memory. This driver uses the component model, so there's sort of two "probes" in this file, one for the platform device i.e. msm_pdev_probe() and one for the component i.e. msm_drm_bind(). The msm_drm_bind() code is using the platform device's driver data to store struct drm_device so the two functions are intertwined. This relationship becomes a problem for msm_pdev_shutdown() when it tests the NULL-ness of the pointer to see if it should call drm_atomic_helper_shutdown(). The NULL test is a proxy check for if the pointer has been freed by kref_put(). If the drm_device has been destroyed, then we shouldn't call the shutdown helper, and we know that is the case if msm_drm_init() failed, therefore set the driver data to NULL so that this pointer liveness is tracked properly. Fixes: 9d5cbf5f ("drm/msm: add shutdown support for display platform_driver") Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Krishna Manikandan <mkrishn@codeaurora.org> Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Message-Id: <20210325212822.3663144-1-swboyd@chromium.org> Signed-off-by:
Rob Clark <robdclark@chromium.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Md Haris Iqbal authored
[ Upstream commit 7582207b ] KASAN detected the following BUG: BUG: KASAN: use-after-free in rtrs_clt_update_wc_stats+0x41/0x100 [rtrs_client] Read of size 8 at addr ffff88bf2fb4adc0 by task swapper/0/0 CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 5.4.84-pserver #5.4.84-1+feature+linux+5.4.y+dbg+20201216.1319+b6b887b~deb10 Hardware name: Supermicro H8QG6/H8QG6, BIOS 3.00 09/04/2012 Call Trace: <IRQ> dump_stack+0x96/0xe0 print_address_description.constprop.4+0x1f/0x300 ? irq_work_claim+0x2e/0x50 __kasan_report.cold.8+0x78/0x92 ? rtrs_clt_update_wc_stats+0x41/0x100 [rtrs_client] kasan_report+0x10/0x20 rtrs_clt_update_wc_stats+0x41/0x100 [rtrs_client] rtrs_clt_rdma_done+0xb1/0x760 [rtrs_client] ? lockdep_hardirqs_on+0x1a8/0x290 ? process_io_rsp+0xb0/0xb0 [rtrs_client] ? mlx4_ib_destroy_cq+0x100/0x100 [mlx4_ib] ? add_interrupt_randomness+0x1a2/0x340 __ib_process_cq+0x97/0x100 [ib_core] ib_poll_handler+0x41/0xb0 [ib_core] irq_poll_softirq+0xe0/0x260 __do_softirq+0x127/0x672 irq_exit+0xd1/0xe0 do_IRQ+0xa3/0x1d0 common_interrupt+0xf/0xf </IRQ> RIP: 0010:cpuidle_enter_state+0xea/0x780 Code: 31 ff e8 99 48 47 ff 80 7c 24 08 00 74 12 9c 58 f6 c4 02 0f 85 53 05 00 00 31 ff e8 b0 6f 53 ff e8 ab 4f 5e ff fb 8b 44 24 04 <85> c0 0f 89 f3 01 00 00 48 8d 7b 14 e8 65 1e 77 ff c7 43 14 00 00 RSP: 0018:ffffffffab007d58 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffca RAX: 0000000000000002 RBX: ffff88b803d69800 RCX: ffffffffa91a8298 RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffffffffab021414 RBP: ffffffffab6329e0 R08: 0000000000000002 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002 R13: 000000bf39d82466 R14: ffffffffab632aa0 R15: ffffffffab632ae0 ? lockdep_hardirqs_on+0x1a8/0x290 ? cpuidle_enter_state+0xe5/0x780 cpuidle_enter+0x3c/0x60 do_idle+0x2fb/0x390 ? arch_cpu_idle_exit+0x40/0x40 ? schedule+0x94/0x120 cpu_startup_entry+0x19/0x1b start_kernel+0x5da/0x61b ? thread_stack_cache_init+0x6/0x6 ? load_ucode_amd_bsp+0x6f/0xc4 ? init_amd_microcode+0xa6/0xa6 ? x86_family+0x5/0x20 ? load_ucode_bsp+0x182/0x1fd secondary_startup_64+0xa4/0xb0 Allocated by task 5730: save_stack+0x19/0x80 __kasan_kmalloc.constprop.9+0xc1/0xd0 kmem_cache_alloc_trace+0x15b/0x350 alloc_sess+0xf4/0x570 [rtrs_client] rtrs_clt_open+0x3b4/0x780 [rtrs_client] find_and_get_or_create_sess+0x649/0x9d0 [rnbd_client] rnbd_clt_map_device+0xd7/0xf50 [rnbd_client] rnbd_clt_map_device_store+0x4ee/0x970 [rnbd_client] kernfs_fop_write+0x141/0x240 vfs_write+0xf3/0x280 ksys_write+0xba/0x150 do_syscall_64+0x68/0x270 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 5822: save_stack+0x19/0x80 __kasan_slab_free+0x125/0x170 kfree+0xe7/0x3f0 kobject_put+0xd3/0x240 rtrs_clt_destroy_sess_files+0x3f/0x60 [rtrs_client] rtrs_clt_close+0x3c/0x80 [rtrs_client] close_rtrs+0x45/0x80 [rnbd_client] rnbd_client_exit+0x10f/0x2bd [rnbd_client] __x64_sys_delete_module+0x27b/0x340 do_syscall_64+0x68/0x270 entry_SYSCALL_64_after_hwframe+0x49/0xbe When rtrs_clt_close is triggered, it iterates over all the present rtrs_clt_sess and triggers close on them. However, the call to rtrs_clt_destroy_sess_files is done before the rtrs_clt_close_conns. This is incorrect since during the initialization phase we allocate rtrs_clt_sess first, and then we go ahead and create rtrs_clt_con for it. If we free the rtrs_clt_sess structure before closing the rtrs_clt_con, it may so happen that an inflight IO completion would trigger the function rtrs_clt_rdma_done, which would lead to the above UAF case. Hence close the rtrs_clt_con connections first, and then trigger the destruction of session files. Fixes: 6a98d71d ("RDMA/rtrs: client: main functionality") Link: https://lore.kernel.org/r/20210325153308.1214057-12-gi-oh.kim@ionos.com Signed-off-by:
Md Haris Iqbal <haris.iqbal@ionos.com> Signed-off-by:
Jack Wang <jinpu.wang@ionos.com> Signed-off-by:
Gioh Kim <gi-oh.kim@ionos.com> Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Eryk Rybak authored
[ Upstream commit c3214de9 ] If veb-stats was enabled, the ethtool stats triggered a warning due to invalid size: 'unexpected stat size for veb.tc_%u_tx_packets'. This was due to an incorrect structure definition for the statistics. Structures and functions have been improved in line with requirements for the presentation of statistics, in particular for the functions: 'i40e_add_ethtool_stats' and 'i40e_add_stat_strings'. Fixes: 1510ae0b ("i40e: convert VEB TC stats to use an i40e_stats array") Signed-off-by:
Eryk Rybak <eryk.roch.rybak@intel.com> Signed-off-by:
Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Reviewed-by:
Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by:
Dave Switzer <david.switzer@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Magnus Karlsson authored
[ Upstream commit 528060ef ] Fix so that single packets are received immediately instead of in batches of 8. If you sent 1 pps to a system, you received 8 packets every 8 seconds instead of 1 packet every second. The problem behind this was that the work_done reporting from the Tx part of the driver was broken. The work_done reporting in i40e controls not only the reporting back to the napi logic but also the setting of the interrupt throttling logic. When Tx or Rx reports that it has more to do, interrupts are throttled or coalesced and when they both report that they are done, interrupts are armed right away. If the wrong work_done value is returned, the logic will start to throttle interrupts in a situation where it should have just enabled them. This leads to the undesired batching behavior seen in user-space. Fix this by returning the correct boolean value from the Tx xsk zero-copy path. Return true if there is nothing to do or if we got fewer packets to process than we asked for. Return false if we got as many packets as the budget since there might be more packets we can process. Fixes: 3106c580 ("i40e: Use batched xsk Tx interfaces to increase performance") Reported-by:
Sreedevi Joshi <sreedevi.joshi@intel.com> Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Acked-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by:
Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Arnd Bergmann authored
[ Upstream commit 040f3119 ] When building with W=1, gcc points out that the __packed attribute on struct qm_eqcr_entry conflicts with the 8-byte alignment attribute on struct qm_fd inside it: drivers/soc/fsl/qbman/qman.c:189:1: error: alignment 1 of 'struct qm_eqcr_entry' is less than 8 [-Werror=packed-not-aligned] I assume that the alignment attribute is the correct one, and that qm_eqcr_entry cannot actually be unaligned in memory, so add the same alignment on the outer struct. Fixes: c535e923 ("soc/fsl: Introduce DPAA 1.x QMan device driver") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210323131530.2619900-1-arnd@kernel.org' Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ong Boon Leong authored
[ Upstream commit 622d1369 ] xdp_return_frame() may be called outside of NAPI context to return xdpf back to page_pool. xdp_return_frame() calls __xdp_return() with napi_direct = false. For page_pool memory model, __xdp_return() calls xdp_return_frame_no_direct() unconditionally and below false negative kernel BUG throw happened under preempt-rt build: [ 430.450355] BUG: using smp_processor_id() in preemptible [00000000] code: modprobe/3884 [ 430.451678] caller is __xdp_return+0x1ff/0x2e0 [ 430.452111] CPU: 0 PID: 3884 Comm: modprobe Tainted: G U E 5.12.0-rc2+ #45 Changes in v2: - This patch fixes the issue by making xdp_return_frame_no_direct() is only called if napi_direct = true, as recommended for better by Jesper Dangaard Brouer. Thanks! Fixes: 2539650f ("xdp: Helpers for disabling napi_direct of xdp_return_frame") Signed-off-by:
Ong Boon Leong <boon.leong.ong@intel.com> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Lv Yunlong authored
[ Upstream commit bdc2ab5c ] In rds_message_map_pages, the rm is freed by rds_message_put(rm). But rm is still used by rm->data.op_sg in return value. My patch assigns ERR_CAST(rm->data.op_sg) to err before the rm is freed to avoid the uaf. Fixes: 7dba9203 ("net/rds: Use ERR_PTR for rds_message_alloc_sgs()") Signed-off-by:
Lv Yunlong <lyl2019@mail.ustc.edu.cn> Reviewed-by:
Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Tariq Toukan authored
[ Upstream commit 3ff3874f ] XSK wakeup flow triggers an IRQ by posting a NOP WQE and hitting the doorbell on the async ICOSQ. It maintains its state so that it doesn't issue another NOP WQE if it has an outstanding one already. For this flow to work properly, the NOP post must not fail. Make sure to reserve room for the NOP WQE in all WQE posts to the async ICOSQ. Fixes: 8d94b590 ("net/mlx5e: Turn XSK ICOSQ into a general asynchronous one") Fixes: 1182f365 ("net/mlx5e: kTLS, Add kTLS RX HW offload support") Fixes: 0419d8c9 ("net/mlx5e: kTLS, Add kTLS RX resync support") Signed-off-by:
Tariq Toukan <tariqt@nvidia.com> Reviewed-by:
Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Daniel Jurgens authored
[ Upstream commit a7b76002 ] Calculating the number of compeltion EQs based on the number of available IRQ vectors doesn't work now that all async EQs share one IRQ. Thus the max number of EQs can be exceeded on systems with more than approximately 256 CPUs. Take this into account when calculating the number of available completion EQs. Fixes: 81bfa206 ("net/mlx5: Use a single IRQ for all async EQs") Signed-off-by:
Daniel Jurgens <danielj@mellanox.com> Reviewed-by:
Parav Pandit <parav@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Aya Levin authored
[ Upstream commit 3211434d ] Use connector_type read from PTYS register when it's valid, based on corresponding capability bit. Fixes: 5b4793f8 ("net/mlx5e: Add support for reading connector type from PTYS") Signed-off-by:
Aya Levin <ayal@nvidia.com> Reviewed-by:
Eran Ben Elisha <eranbe@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Maor Dickman authored
[ Upstream commit 1f90aedf ] Delete auxiliary bus drivers flow deletes the eth driver first and then the eth-reps driver but eth-reps devices resources are depend on eth device. Fixed by changing the delete order of auxiliary bus drivers to delete the eth-rep driver first and after it the eth driver. Fixes: 601c10c8 ("net/mlx5: Delete custom device management logic") Signed-off-by:
Maor Dickman <maord@nvidia.com> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Reviewed-by:
Roi Dayan <roid@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ariel Levkovich authored
[ Upstream commit d24f847e ] ct_label 0 is a default label each flow has and therefore there can be rules that match on ct_label=0 without a prior rule that set the ct_label to this value. The ct_label value is not used directly in the HW rules and instead it is mapped to some id within a defined range and this id is used to set and match the metadata register which carries the ct_label. If we have a rule that matches on ct_label=0, the hw rule will perform matching on a value that is != 0 because of the mapping from label to id. Since the metadata register default value is 0 and it was never set before to anything else by an action that sets the ct_label, there will always be a mismatch between that register and the value in the rule. To support such rule, a forced mapping of ct_label 0 to id=0 is done so that it will match the metadata register default value of 0. Fixes: 54b154ec ("net/mlx5e: CT: Map 128 bits labels to 32 bit map ID") Signed-off-by:
Ariel Levkovich <lariel@nvidia.com> Reviewed-by:
Roi Dayan <roid@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-