- Sep 13, 2023
-
-
Ross Lagerwall authored
commit 8ec9c1d5 upstream. release_resource() doesn't actually free the resource or resource list entry so free the resource list entry to avoid a leak. Closes: https://lore.kernel.org/r/878r9sga1t.fsf@kernel.org/ Fixes: e5422327 ("PCI: Release resource invalidated by coalescing") Link: https://lore.kernel.org/r/20230906110846.225369-1-ross.lagerwall@citrix.com Reported-by: Kalle Valo <kvalo@kernel.org> Tested-by: Kalle Valo <kvalo@kernel.org> Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v5.16+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ranjan Kumar authored
commit 4ca10f3e upstream. The driver retries certain register reads 3 times if the returned value is 0. This was done because the controller could return 0 for certain registers if other registers were being accessed concurrently by the BMC. In certain systems with increased BMC interactions, the register values returned can be 0 for longer than 3 retries. Change the retry count from 3 to 30 for the affected registers to prevent problems with out-of-band management. Fixes: b8992029 ("scsi: mpt3sas: Add separate function for aero doorbell reads") Cc: stable@vger.kernel.org Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20230829090020.5417-2-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nilesh Javali authored
commit 641671d9 upstream. Revert due to Get PLOGI Template failed. This reverts commit b68710a8 . Cc: stable@vger.kernel.org Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230821130045.34850-9-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yang Yingliang authored
commit 4b60db99 upstream. It should check 'xbar->inputs', when allocate memory for it. Cc: stable@vger.kernel.org Fixes: cf21f328 ("media: nxp: Add i.MX8 ISI driver") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Konrad Dybcio authored
commit d74e4816 upstream. The startup procedure shouldn't be started with interrupts masked, as that may entail silent failures. Kick off initialization only after the interrupts are unmasked. Cc: stable@vger.kernel.org # v4.12+ Fixes: d96d3f30 ("[media] media: venus: hfi: add Venus HFI files") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
commit 86495af1 upstream. In commit 9011e49d ("modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules") the use of symbol_get is properly restricted to GPL-only marked symbols. This interacts oddly with the DVB logic which only uses dvb_attach() to load the dvb driver which then uses symbol_get(). Fix this up by properly marking all of the dvb_attach attach symbols as EXPORT_SYMBOL_GPL(). Fixes: 9011e49d ("modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules") Cc: stable <stable@kernel.org> Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: linux-media@vger.kernel.org Cc: linux-modules@vger.kernel.org Acked-by: Luis Chamberlain <mcgrof@kernel.org> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://lore.kernel.org/r/20230908092035.3815268-2-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vitaly Rodionov authored
commit 99bf5b0b upstream. Recently in v6.3-rc1 there was a change affecting behaviour of hrtimers (commit 0c52310f) and causing few issues on platforms with two CS42L42 codecs. Canonical/Dell has reported an issue with Vostro-3910. We need to increase this value by 15ms. Link: https://bugs.launchpad.net/somerville/+bug/2031060 Fixes: 9fb9fa18 ("ALSA: hda/cirrus: Add extra 10 ms delay to allow PLL settle and lock.") Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230904160033.908135-1-vitalyr@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Will Deacon authored
commit 8bd795fe upstream. Although commit c2c24edb ("arm64: csum: Fix pathological zero-length calls") added an early return for zero-length input, syzkaller has popped up with an example of a _negative_ length which causes an undefined shift and an out-of-bounds read: | BUG: KASAN: slab-out-of-bounds in do_csum+0x44/0x254 arch/arm64/lib/csum.c:39 | Read of size 4294966928 at addr ffff0000d7ac0170 by task syz-executor412/5975 | | CPU: 0 PID: 5975 Comm: syz-executor412 Not tainted 6.4.0-rc4-syzkaller-g908f31f2a05b #0 | Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023 | Call trace: | dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:233 | show_stack+0x2c/0x44 arch/arm64/kernel/stacktrace.c:240 | __dump_stack lib/dump_stack.c:88 [inline] | dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106 | print_address_description mm/kasan/report.c:351 [inline] | print_report+0x174/0x514 mm/kasan/report.c:462 | kasan_report+0xd4/0x130 mm/kasan/report.c:572 | kasan_check_range+0x264/0x2a4 mm/kasan/generic.c:187 | __kasan_check_read+0x20/0x30 mm/kasan/shadow.c:31 | do_csum+0x44/0x254 arch/arm64/lib/csum.c:39 | csum_partial+0x30/0x58 lib/checksum.c:128 | gso_make_checksum include/linux/skbuff.h:4928 [inline] | __udp_gso_segment+0xaf4/0x1bc4 net/ipv4/udp_offload.c:332 | udp6_ufo_fragment+0x540/0xca0 net/ipv6/udp_offload.c:47 | ipv6_gso_segment+0x5cc/0x1760 net/ipv6/ip6_offload.c:119 | skb_mac_gso_segment+0x2b4/0x5b0 net/core/gro.c:141 | __skb_gso_segment+0x250/0x3d0 net/core/dev.c:3401 | skb_gso_segment include/linux/netdevice.h:4859 [inline] | validate_xmit_skb+0x364/0xdbc net/core/dev.c:3659 | validate_xmit_skb_list+0x94/0x130 net/core/dev.c:3709 | sch_direct_xmit+0xe8/0x548 net/sched/sch_generic.c:327 | __dev_xmit_skb net/core/dev.c:3805 [inline] | __dev_queue_xmit+0x147c/0x3318 net/core/dev.c:4210 | dev_queue_xmit include/linux/netdevice.h:3085 [inline] | packet_xmit+0x6c/0x318 net/packet/af_packet.c:276 | packet_snd net/packet/af_packet.c:3081 [inline] | packet_sendmsg+0x376c/0x4c98 net/packet/af_packet.c:3113 | sock_sendmsg_nosec net/socket.c:724 [inline] | sock_sendmsg net/socket.c:747 [inline] | __sys_sendto+0x3b4/0x538 net/socket.c:2144 Extend the early return to reject negative lengths as well, aligning our implementation with the generic code in lib/checksum.c Cc: Robin Murphy <robin.murphy@arm.com> Fixes: 5777eaed ("arm64: Implement optimised checksum routine") Reported-by: <syzbot+4a9f9820bd8d302e22f7@syzkaller.appspotmail.com> Link: https://lore.kernel.org/r/000000000000e0e94c0603f8d213@google.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gabriel Krisman Bertazi authored
commit bd6fc5da upstream. Syzbot reported a null-ptr-deref of sqd->thread inside io_sqpoll_wq_cpu_affinity. It turns out the sqd->thread can go away from under us during io_uring_register, in case the process gets a fatal signal during io_uring_register. It is not particularly hard to hit the race, and while I am not sure this is the exact case hit by syzbot, it solves it. Finally, checking ->thread is enough to close the race because we locked sqd while "parking" the thread, thus preventing it from going away. I reproduced it fairly consistently with a program that does: int main(void) { ... io_uring_queue_init(RING_LEN, &ring1, IORING_SETUP_SQPOLL); while (1) { io_uring_register_iowq_aff(ring, 1, &mask); } } Executed in a loop with timeout to trigger SIGTERM: while true; do timeout 1 /a.out ; done This will hit the following BUG() in very few attempts. BUG: kernel NULL pointer dereference, address: 00000000000007a8 PGD 800000010e949067 P4D 800000010e949067 PUD 10e46e067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 15715 Comm: dead-sqpoll Not tainted 6.5.0-rc7-next-20230825-g193296236fa0-dirty #23 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:io_sqpoll_wq_cpu_affinity+0x27/0x70 Code: 90 90 90 0f 1f 44 00 00 55 53 48 8b 9f 98 03 00 00 48 85 db 74 4f 48 89 df 48 89 f5 e8 e2 f8 ff ff 48 8b 43 38 48 85 c0 74 22 <48> 8b b8 a8 07 00 00 48 89 ee e8 ba b1 00 00 48 89 df 89 c5 e8 70 RSP: 0018:ffffb04040ea7e70 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff93c010749e40 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffffffa7653331 RDI: 00000000ffffffff RBP: ffffb04040ea7eb8 R08: 0000000000000000 R09: c0000000ffffdfff R10: ffff93c01141b600 R11: ffffb04040ea7d18 R12: ffff93c00ea74840 R13: 0000000000000011 R14: 0000000000000000 R15: ffff93c00ea74800 FS: 00007fb7c276ab80(0000) GS:ffff93c36f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000007a8 CR3: 0000000111634003 CR4: 0000000000370ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die_body+0x1a/0x60 ? page_fault_oops+0x154/0x440 ? do_user_addr_fault+0x174/0x7b0 ? exc_page_fault+0x63/0x140 ? asm_exc_page_fault+0x22/0x30 ? io_sqpoll_wq_cpu_affinity+0x27/0x70 __io_register_iowq_aff+0x2b/0x60 __io_uring_register+0x614/0xa70 __x64_sys_io_uring_register+0xaa/0x1a0 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 RIP: 0033:0x7fb7c226fec9 Code: 2e 00 b8 ca 00 00 00 0f 05 eb a5 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 97 7f 2d 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe2c0674f8 EFLAGS: 00000246 ORIG_RAX: 00000000000001ab RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fb7c226fec9 RDX: 00007ffe2c067530 RSI: 0000000000000011 RDI: 0000000000000003 RBP: 00007ffe2c0675d0 R08: 00007ffe2c067550 R09: 00007ffe2c067550 R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffe2c067750 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: CR2: 00000000000007a8 ---[ end trace 0000000000000000 ]--- Reported-by: <syzbot+c74fea926a78b8a91042@syzkaller.appspotmail.com> Fixes: ebdfefc0 ("io_uring/sqpoll: fix io-wq affinity when IORING_SETUP_SQPOLL is used") Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de> Link: https://lore.kernel.org/r/87v8cybuo6.fsf@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Frank Li authored
commit 6e13d652 upstream. I3C masters are expected to support hot-join. This means at initialization time we might not yet discover any device and this should not be treated as a fatal error. During the DAA procedure which happens at probe time, if no device has joined, all CCC will be NACKed (from a bus perspective). This leads to an early return with an error code which fails the probe of the master. Let's avoid this by just telling the core through an I3C_ERROR_M2 return command code that no device was discovered, which is a valid situation. This way the master will no longer bail out and fail to probe for a wrong reason. Cc: stable@vger.kernel.org Fixes: dd3c5284 ("i3c: master: svc: Add Silvaco I3C master driver") Signed-off-by: Frank Li <Frank.Li@nxp.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20230831141324.2841525-1-Frank.Li@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Naveen N Rao authored
commit f6834c8c upstream. The minimum level of gcc supported for building the kernel is v5.1. v5.x releases of gcc emitted a three instruction sequence for -mprofile-kernel: mflr r0 std r0, 16(r1) bl _mcount It is only with the v6.x releases that gcc started emitting the two instruction sequence for -mprofile-kernel, omitting the second store instruction. With the older three instruction sequence, the actual ftrace location can be the 5th instruction into a function. Update the allowed offset for ftrace location from 12 to 16 to accommodate the same. Cc: stable@vger.kernel.org Fixes: 7af82ff9 ("powerpc/ftrace: Ignore weak functions") Signed-off-by: Naveen N Rao <naveen@kernel.org> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/7b265908a9461e38fc756ef9b569703860a80621.1687166935.git.naveen@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hongchen Zhang authored
commit 303be4b3 upstream. When I do LTP test, LTP test case ksm06 caused panic at break_ksm_pmd_entry -> pmd_leaf (Huge page table but False) -> pte_present (panic) The reason is pmd_leaf() is not defined, So like commit 501b8104 ("mips: mm: add p?d_leaf() definitions") add p?d_leaf() definition for LoongArch. Fixes: 09cfefb7 ("LoongArch: Add memory management") Cc: stable@vger.kernel.org Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Max Filippov authored
commit 687eb3c4 upstream. With introduction of ERI access control in RG.0 base address of the PMU unit registers has changed. Add support for the new PMU configuration. Cc: stable@vger.kernel.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hamza Mahfooz authored
commit 1611917f upstream. As made mention of in commit 099303e9 ("drm/amd/display: eDP intermittent black screen during PnP"), we need to turn off the display's backlight before powering off an eDP display. Not doing so will result in undefined behaviour according to the eDP spec. So, set DCN301's edp_backlight_control() function pointer to dce110_edp_backlight_control(). Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2765 Fixes: 9c75891f ("drm/amd/display: rework recent update PHY state commit") Suggested-by: Swapnil Patel <swapnil.patel@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Zimmermann authored
commit 1ca88193 upstream. Struct lv5207lp_platform_data refers to a platform device within the Linux device hierarchy. The test in lv5207lp_backlight_check_fb() compares it against the fbdev device in struct fb_info.dev, which is different. Fix the test by comparing to struct fb_info.device. Fixes a bug in the backlight driver and prepares fbdev for making struct fb_info.dev optional. v2: * move renames into separate patch (Javier, Sam, Michael) Fixes: 82e5c40d ("backlight: Add Sanyo LV5207LP backlight driver") Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Lee Jones <lee@kernel.org> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: linux-sh@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v3.12+ Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-6-tzimmermann@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Zimmermann authored
commit 992bddda upstream. Struct bd6107_platform_data refers to a platform device within the Linux device hierarchy. The test in bd6107_backlight_check_fb() compares it against the fbdev device in struct fb_info.dev, which is different. Fix the test by comparing to struct fb_info.device. Fixes a bug in the backlight driver and prepares fbdev for making struct fb_info.dev optional. v2: * move renames into separate patch (Javier, Sam, Michael) Fixes: 67b43e59 ("backlight: Add ROHM BD6107 backlight driver") Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Lee Jones <lee@kernel.org> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v3.12+ Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-2-tzimmermann@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Zimmermann authored
commit 7b91d017 upstream. Struct gpio_backlight_platform_data refers to a platform device within the Linux device hierarchy. The test in gpio_backlight_check_fb() compares it against the fbdev device in struct fb_info.dev, which is different. Fix the test by comparing to struct fb_info.device. Fixes a bug in the backlight driver and prepares fbdev for making struct fb_info.dev optional. v2: * move renames into separate patch (Javier, Sam, Michael) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 8b770e3c ("backlight: Add GPIO-based backlight driver") Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Rich Felker <dalias@libc.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Lee Jones <lee@kernel.org> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: linux-sh@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v3.12+ Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-4-tzimmermann@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pavel Begunkov authored
commit 45500dc4 upstream. io-wq will retry iopoll even when it failed with -EAGAIN. If that races with task exit, which sets TIF_NOTIFY_SIGNAL for all its workers, such workers might potentially infinitely spin retrying iopoll again and again and each time failing on some allocation / waiting / etc. Don't keep spinning if io-wq is dying. Fixes: 561fb04a ("io_uring: replace workqueue usage with io-wq") Cc: stable@vger.kernel.org Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jens Axboe authored
commit ebdfefc0 upstream. If we setup the ring with SQPOLL, then that polling thread has its own io-wq setup. This means that if the application uses IORING_REGISTER_IOWQ_AFF to set the io-wq affinity, we should not be setting it for the invoking task, but rather the sqpoll task. Add an sqpoll helper that parks the thread and updates the affinity, and use that one if we're using SQPOLL. Fixes: fe76421d ("io_uring: allow user configurable IO thread CPU affinity") Cc: stable@vger.kernel.org # 5.10+ Link: https://github.com/axboe/liburing/discussions/884 Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pavel Begunkov authored
commit dc314886 upstream. Don't keep spinning iopoll with a signal set. It'll eventually return back, e.g. by virtue of need_resched(), but it's not a nice user experience. Cc: stable@vger.kernel.org Fixes: def596e9 ("io_uring: support for IO polling") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/eeba551e82cad12af30c3220125eb6cb244cc94c.1691594339.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pavel Begunkov authored
commit 569f5308 upstream. io_req_local_work_add() peeks into the work list, which can be executed in the meanwhile. It's completely fine without KASAN as we're in an RCU read section and it's SLAB_TYPESAFE_BY_RCU. With KASAN though it may trigger a false positive warning because internal io_uring caches are sanitised. Remove sanitisation from the io_uring request cache for now. Cc: stable@vger.kernel.org Fixes: 8751d154 ("io_uring: reduce scheduling due to tw") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/c6fbf7a82a341e66a0007c76eefd9d57f2d3ba51.1691541473.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Matthew Wilcox (Oracle) authored
commit cbc02854 upstream. It is possible for xa_load() to observe a sibling entry pointing to another sibling entry. An example: Thread A: Thread B: xa_store_range(xa, entry, 188, 191, gfp); xa_load(xa, 191); entry = xa_entry(xa, node, 63); [entry is a sibling of 188] xa_store_range(xa, entry, 184, 191, gfp); if (xa_is_sibling(entry)) offset = xa_to_sibling(entry); entry = xa_entry(xas->xa, node, offset); [entry is now a sibling of 184] It is sufficient to go around this loop until we hit a non-sibling entry. Sibling entries always point earlier in the node, so we are guaranteed to terminate this search. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Fixes: 6b24ca4a ("mm: Use multi-index entries in the page cache") Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexandre Ghiti authored
commit dd7664d6 upstream. tmp_pg_dir, tmp_p4d and tmp_pud are only used in kasan_init.c so they should be declared as static. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202306282202.bODptiGE-lkp@intel.com/ Fixes: 96f9d4da ("riscv: Rework kasan population functions") Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20230704074357.233982-1-alexghiti@rivosinc.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexandre Ghiti authored
commit 9bdd9248 upstream. This function is only used at boot time so mark it as __init. Fixes: 96f9d4da ("riscv: Rework kasan population functions") Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20230704074357.233982-2-alexghiti@rivosinc.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gustavo A. R. Silva authored
commit 847fb80c upstream. If function pwrdm_read_prev_pwrst() returns -EINVAL, we will end up accessing array pwrdm->state_counter through negative index -22. This is wrong and the compiler is legitimately warning us about this potential problem. Fix this by sanity checking the value stored in variable _prev_ before accessing array pwrdm->state_counter. Address the following -Warray-bounds warning: arch/arm/mach-omap2/powerdomain.c:178:45: warning: array subscript -22 is below array bounds of 'unsigned int[4]' [-Warray-bounds] Link: https://github.com/KSPP/linux/issues/307 Fixes: ba20bb12 ("OMAP: PM counter infrastructure.") Cc: stable@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/lkml/20230607050639.LzbPn%25lkp@intel.com/ Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Message-ID: <ZIFVGwImU3kpaGeH@work> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yi Yang authored
commit 6cf1a126 upstream. Kmemleak reported the following leak info in try_smi_init(): unreferenced object 0xffff00018ecf9400 (size 1024): comm "modprobe", pid 2707763, jiffies 4300851415 (age 773.308s) backtrace: [<000000004ca5b312>] __kmalloc+0x4b8/0x7b0 [<00000000953b1072>] try_smi_init+0x148/0x5dc [ipmi_si] [<000000006460d325>] 0xffff800081b10148 [<0000000039206ea5>] do_one_initcall+0x64/0x2a4 [<00000000601399ce>] do_init_module+0x50/0x300 [<000000003c12ba3c>] load_module+0x7a8/0x9e0 [<00000000c246fffe>] __se_sys_init_module+0x104/0x180 [<00000000eea99093>] __arm64_sys_init_module+0x24/0x30 [<0000000021b1ef87>] el0_svc_common.constprop.0+0x94/0x250 [<0000000070f4f8b7>] do_el0_svc+0x48/0xe0 [<000000005a05337f>] el0_svc+0x24/0x3c [<000000005eb248d6>] el0_sync_handler+0x160/0x164 [<0000000030a59039>] el0_sync+0x160/0x180 The problem was that when an error occurred before handlers registration and after allocating `new_smi->si_sm`, the variable wouldn't be freed in the error handling afterwards since `shutdown_smi()` hadn't been registered yet. Fix it by adding a `kfree()` in the error handling path in `try_smi_init()`. Cc: stable@vger.kernel.org # 4.19+ Fixes: 7960f18a ("ipmi_si: Convert over to a shutdown handler") Signed-off-by: Yi Yang <yiyang13@huawei.com> Co-developed-by: GONG, Ruiqi <gongruiqi@huaweicloud.com> Signed-off-by: GONG, Ruiqi <gongruiqi@huaweicloud.com> Message-Id: <20230629123328.2402075-1-gongruiqi@huaweicloud.com> Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rick Wertenbroek authored
commit cdb50033 upstream. A 32-bit mask was used on the 64-bit PCI address used for mapping MSIs. This would result in the upper 32 bits being unintentionally zeroed and MSIs getting mapped to incorrect PCI addresses if the address had any of the upper bits set. Replace 32-bit mask by appropriate 64-bit mask. [kwilczynski: use GENMASK_ULL() over GENMASK() for 32-bit compatibility] Fixes: dc73ed0f ("PCI: rockchip: Fix window mapping and address translation for endpoint") Closes: https://lore.kernel.org/linux-pci/8d19e5b7-8fa0-44a4-90e2-9bb06f5eb694@moroto.mountain Link: https://lore.kernel.org/linux-pci/20230703085845.2052008-1-rick.wertenbroek@gmail.com Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sakari Ailus authored
commit 7d3c7d2a upstream. Select V4L2_FWNODE and VIDEO_V4L2_SUBDEV_API for all sensor drivers. This also adds the options to drivers that don't specifically need them, these are still seldom used drivers using old APIs. The upside is that these should now all compile --- many drivers have had missing dependencies. The "menu" is replaced by selectable "menuconfig" to select the needed V4L2_FWNODE and VIDEO_V4L2_SUBDEV_API options. Also select MEDIA_CONTROLLER which VIDEO_V4L2_SUBDEV_API effectively depends on, and add the I2C dependency to the menu. Reported-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: stable@vger.kernel.org # for >= 6.1 Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sakari Ailus authored
commit 607bcc42 upstream. Fix the following smatch warning: drivers/media/i2c/ccs/ccs-data.c:524 ccs_data_parse_rules() warn: address of NULL pointer 'rules' The CCS static data rule parser does not check an if rule has been obtained before checking for other rule types (which depend on the if rule). In practice this means parsing invalid CCS static data could lead to dereferencing a NULL pointer. Reported-by: Hans Verkuil <hverkuil@xs4all.nl> Fixes: a6b396f4 ("media: ccs: Add CCS static data parser library") Cc: stable@vger.kernel.org # for 5.11 and up Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Gleixner authored
commit 2b8272ff upstream. Xiongfeng reported and debugged a self deadlock of the task which initiates and controls a CPU hot-unplug operation vs. the CFS bandwidth timer. CPU1 CPU2 T1 sets cfs_quota starts hrtimer cfs_bandwidth 'period_timer' T1 is migrated to CPU2 T1 initiates offlining of CPU1 Hotplug operation starts ... 'period_timer' expires and is re-enqueued on CPU1 ... take_cpu_down() CPU1 shuts down and does not handle timers anymore. They have to be migrated in the post dead hotplug steps by the control task. T1 runs the post dead offline operation T1 is scheduled out T1 waits for 'period_timer' to expire T1 waits there forever if it is scheduled out before it can execute the hrtimer offline callback hrtimers_dead_cpu(). Cure this by delegating the hotplug control operation to a worker thread on an online CPU. This takes the initiating user space task, which might be affected by the bandwidth timer, completely out of the picture. Reported-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Yu Liao <liaoyu15@huawei.com> Acked-by: Vincent Guittot <vincent.guittot@linaro.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/lkml/8e785777-03aa-99e1-d20e-e956f5685be6@huawei.com Link: https://lore.kernel.org/r/87h6oqdq0i.ffs@tglx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Joel Fernandes (Google) authored
commit 0818e739 upstream. It is unsafe to dump vmalloc area information when trying to do so from some contexts. Add a safer trylock version of the same function to do a best-effort VMA finding and use it from vmalloc_dump_obj(). [applied test robot feedback on unused function fix.] [applied Uladzislau feedback on locking.] Link: https://lkml.kernel.org/r/20230904180806.1002832-1-joel@joelfernandes.org Fixes: 98f18083 ("mm: Make mem_dump_obj() handle vmalloc() memory") Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Reported-by: Zhen Lei <thunder.leizhen@huaweicloud.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Zqiang <qiang.zhang1211@gmail.com> Cc: <stable@vger.kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bart Van Assche authored
commit f669b8a6 upstream. Because scsi_finish_command() subtracts the residual from the buffer length, residual overflows must not be reported. Reflect this in the SCSI documentation. See also commit 9237f04e ("scsi: core: Fix scsi_get/set_resid() interface") Cc: Damien Le Moal <dlemoal@kernel.org> Cc: Hannes Reinecke <hare@suse.de> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: stable@vger.kernel.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230721160154.874010-2-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kees Cook authored
commit 53e9e33e upstream. If an output buffer size exceeded U16_MAX, the min_t(u16, ...) cast in copy_data() was causing writes to truncate. This manifested as output bytes being skipped, seen as %NUL bytes in pstore dumps when the available record size was larger than 65536. Fix the cast to no longer truncate the calculation. Cc: Petr Mladek <pmladek@suse.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: John Ogness <john.ogness@linutronix.de> Reported-by: Vijay Balakrishna <vijayb@linux.microsoft.com> Link: https://lore.kernel.org/lkml/d8bb1ec7-a4c5-43a2-9de0-9643a70b899f@linux.microsoft.com/ Fixes: b6cf8b3f ("printk: add lockless ringbuffer") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Tested-by: Vijay Balakrishna <vijayb@linux.microsoft.com> Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck Reviewed-by: Tyler Hicks (Microsoft) <code@tyhicks.com> Tested-by: Tyler Hicks (Microsoft) <code@tyhicks.com> Reviewed-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20230811054528.never.165-kees@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Zqiang authored
commit c83ad36a upstream. Currently, for double invoke call_rcu(), will dump rcu_head objects memory info, if the objects is not allocated from the slab allocator, the vmalloc_dump_obj() will be invoke and the vmap_area_lock spinlock need to be held, since the call_rcu() can be invoked in interrupt context, therefore, there is a possibility of spinlock deadlock scenarios. And in Preempt-RT kernel, the rcutorture test also trigger the following lockdep warning: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 1, name: swapper/0 preempt_count: 1, expected: 0 RCU nest depth: 1, expected: 1 3 locks held by swapper/0/1: #0: ffffffffb534ee80 (fullstop_mutex){+.+.}-{4:4}, at: torture_init_begin+0x24/0xa0 #1: ffffffffb5307940 (rcu_read_lock){....}-{1:3}, at: rcu_torture_init+0x1ec7/0x2370 #2: ffffffffb536af40 (vmap_area_lock){+.+.}-{3:3}, at: find_vmap_area+0x1f/0x70 irq event stamp: 565512 hardirqs last enabled at (565511): [<ffffffffb379b138>] __call_rcu_common+0x218/0x940 hardirqs last disabled at (565512): [<ffffffffb5804262>] rcu_torture_init+0x20b2/0x2370 softirqs last enabled at (399112): [<ffffffffb36b2586>] __local_bh_enable_ip+0x126/0x170 softirqs last disabled at (399106): [<ffffffffb43fef59>] inet_register_protosw+0x9/0x1d0 Preemption disabled at: [<ffffffffb58040c3>] rcu_torture_init+0x1f13/0x2370 CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.5.0-rc4-rt2-yocto-preempt-rt+ #15 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x68/0xb0 dump_stack+0x14/0x20 __might_resched+0x1aa/0x280 ? __pfx_rcu_torture_err_cb+0x10/0x10 rt_spin_lock+0x53/0x130 ? find_vmap_area+0x1f/0x70 find_vmap_area+0x1f/0x70 vmalloc_dump_obj+0x20/0x60 mem_dump_obj+0x22/0x90 __call_rcu_common+0x5bf/0x940 ? debug_smp_processor_id+0x1b/0x30 call_rcu_hurry+0x14/0x20 rcu_torture_init+0x1f82/0x2370 ? __pfx_rcu_torture_leak_cb+0x10/0x10 ? __pfx_rcu_torture_leak_cb+0x10/0x10 ? __pfx_rcu_torture_init+0x10/0x10 do_one_initcall+0x6c/0x300 ? debug_smp_processor_id+0x1b/0x30 kernel_init_freeable+0x2b9/0x540 ? __pfx_kernel_init+0x10/0x10 kernel_init+0x1f/0x150 ret_from_fork+0x40/0x50 ? __pfx_kernel_init+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> The previous patch fixes this by using the deadlock-safe best-effort version of find_vm_area. However, in case of failure print the fact that the pointer was a vmalloc pointer so that we print at least something. Link: https://lkml.kernel.org/r/20230904180806.1002832-2-joel@joelfernandes.org Fixes: 98f18083 ("mm: Make mem_dump_obj() handle vmalloc() memory") Signed-off-by: Zqiang <qiang.zhang1211@gmail.com> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Reported-by: Zhen Lei <thunder.leizhen@huaweicloud.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hou Tao authored
commit c1dbd8a8 upstream. When doing mkfs.xfs on a pmem device, the following warning was reported: ------------[ cut here ]------------ WARNING: CPU: 2 PID: 384 at block/blk-core.c:751 submit_bio_noacct Modules linked in: CPU: 2 PID: 384 Comm: mkfs.xfs Not tainted 6.4.0-rc7+ #154 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:submit_bio_noacct+0x340/0x520 ...... Call Trace: <TASK> ? submit_bio_noacct+0xd5/0x520 submit_bio+0x37/0x60 async_pmem_flush+0x79/0xa0 nvdimm_flush+0x17/0x40 pmem_submit_bio+0x370/0x390 __submit_bio+0xbc/0x190 submit_bio_noacct_nocheck+0x14d/0x370 submit_bio_noacct+0x1ef/0x520 submit_bio+0x55/0x60 submit_bio_wait+0x5a/0xc0 blkdev_issue_flush+0x44/0x60 The root cause is that submit_bio_noacct() needs bio_op() is either WRITE or ZONE_APPEND for flush bio and async_pmem_flush() doesn't assign REQ_OP_WRITE when allocating flush bio, so submit_bio_noacct just fail the flush bio. Simply fix it by adding the missing REQ_OP_WRITE for flush bio. And we could fix the flush order issue and do flush optimization later. Cc: stable@vger.kernel.org # 6.3+ Fixes: b4a6bb3a ("block: add a sanity check for non-write flush/fua bios") Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com> Tested-by: Pankaj Gupta <pankaj.gupta@amd.com> Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit 358040e3 upstream. The update of rate_num/den and msbits were factored out to fixup_unreferenced_params() function to be called explicitly after the hw_refine or hw_params procedure. It's called from snd_pcm_hw_refine_user(), but it's forgotten in the PCM compat ioctl. This ended up with the incomplete rate_num/den and msbits parameters when 32bit compat ioctl is used. This patch adds the missing call in snd_pcm_ioctl_hw_params_compat(). Reported-by: <Meng_Cai@novatek.com.cn> Fixes: f9a076bf ("ALSA: pcm: calculate non-mask/non-interval parameters always when possible") Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230829134344.31588-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kalesh Singh authored
commit 669281ee upstream. MGLRU has a LRU list for each zone for each type (anon/file) in each generation: long nr_pages[MAX_NR_GENS][ANON_AND_FILE][MAX_NR_ZONES]; The min_seq (oldest generation) can progress independently for each type but the max_seq (youngest generation) is shared for both anon and file. This is to maintain a common frame of reference. In order for eviction to advance the min_seq of a type, all the per-zone lists in the oldest generation of that type must be empty. The eviction logic only considers pages from eligible zones for eviction or promotion. scan_folios() { ... for (zone = sc->reclaim_idx; zone >= 0; zone--) { ... sort_folio(); // Promote ... isolate_folio(); // Evict } ... } Consider the system has the movable zone configured and default 4 generations. The current state of the system is as shown below (only illustrating one type for simplicity): Type: ANON Zone DMA32 Normal Movable Device Gen 0 0 0 4GB 0 Gen 1 0 1GB 1MB 0 Gen 2 1MB 4GB 1MB 0 Gen 3 1MB 1MB 1MB 0 Now consider there is a GFP_KERNEL allocation request (eligible zone index <= Normal), evict_folios() will return without doing any work since there are no pages to scan in the eligible zones of the oldest generation. Reclaim won't make progress until triggered from a ZONE_MOVABLE allocation request; which may not happen soon if there is a lot of free memory in the movable zone. This can lead to OOM kills, although there is 1GB pages in the Normal zone of Gen 1 that we have not yet tried to reclaim. This issue is not seen in the conventional active/inactive LRU since there are no per-zone lists. If there are no (not enough) folios to scan in the eligible zones, move folios from ineligible zone (zone_index > reclaim_index) to the next generation. This allows for the progression of min_seq and reclaiming from the next generation (Gen 1). Qualcomm, Mediatek and raspberrypi [1] discovered this issue independently. [1] https://github.com/raspberrypi/linux/issues/5395 Link: https://lkml.kernel.org/r/20230802025606.346758-1-kaleshsingh@google.com Fixes: ac35a490 ("mm: multi-gen LRU: minimal implementation") Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Reported-by: Charan Teja Kalla <quic_charante@quicinc.com> Reported-by: Lecopzer Chen <lecopzer.chen@mediatek.com> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> [mediatek] Tested-by: Charan Teja Kalla <quic_charante@quicinc.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Barry Song <baohua@kernel.org> Cc: Brian Geffon <bgeffon@google.com> Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Steven Barrett <steven@liquorix.net> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Aneesh Kumar K V <aneesh.kumar@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Boris Brezillon authored
commit 5693d077 upstream. srcu_init_notifier_head() allocates resources that need to be released with a srcu_cleanup_notifier_head() call. Reported by kmemleak. Fixes: 0fe3a664 ("PM / devfreq: Add new DEVFREQ_TRANSITION_NOTIFIER notifier") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Dhruva Gole <d-gole@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Radoslaw Tyl authored
commit bb5ed01c upstream. Increase the RX buffer size to 3K when the SBP bit is on. The size of the RX buffer determines the number of pages allocated which may not be sufficient for receive frames larger than the set MTU size. Cc: stable@vger.kernel.org Fixes: 89eaefb6 ("igb: Support RX-ALL feature flag.") Reported-by: Manfred Rudigier <manfred.rudigier@omicronenergy.com> Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mohamed Khalfella authored
commit 2ea35288 upstream. Commit bf5c25d6 ("skbuff: in skb_segment, call zerocopy functions once per nskb") added the call to zero copy functions in skb_segment(). The change introduced a bug in skb_segment() because skb_orphan_frags() may possibly change the number of fragments or allocate new fragments altogether leaving nrfrags and frag to point to the old values. This can cause a panic with stacktrace like the one below. [ 193.894380] BUG: kernel NULL pointer dereference, address: 00000000000000bc [ 193.895273] CPU: 13 PID: 18164 Comm: vh-net-17428 Kdump: loaded Tainted: G O 5.15.123+ #26 [ 193.903919] RIP: 0010:skb_segment+0xb0e/0x12f0 [ 194.021892] Call Trace: [ 194.027422] <TASK> [ 194.072861] tcp_gso_segment+0x107/0x540 [ 194.082031] inet_gso_segment+0x15c/0x3d0 [ 194.090783] skb_mac_gso_segment+0x9f/0x110 [ 194.095016] __skb_gso_segment+0xc1/0x190 [ 194.103131] netem_enqueue+0x290/0xb10 [sch_netem] [ 194.107071] dev_qdisc_enqueue+0x16/0x70 [ 194.110884] __dev_queue_xmit+0x63b/0xb30 [ 194.121670] bond_start_xmit+0x159/0x380 [bonding] [ 194.128506] dev_hard_start_xmit+0xc3/0x1e0 [ 194.131787] __dev_queue_xmit+0x8a0/0xb30 [ 194.138225] macvlan_start_xmit+0x4f/0x100 [macvlan] [ 194.141477] dev_hard_start_xmit+0xc3/0x1e0 [ 194.144622] sch_direct_xmit+0xe3/0x280 [ 194.147748] __dev_queue_xmit+0x54a/0xb30 [ 194.154131] tap_get_user+0x2a8/0x9c0 [tap] [ 194.157358] tap_sendmsg+0x52/0x8e0 [tap] [ 194.167049] handle_tx_zerocopy+0x14e/0x4c0 [vhost_net] [ 194.173631] handle_tx+0xcd/0xe0 [vhost_net] [ 194.176959] vhost_worker+0x76/0xb0 [vhost] [ 194.183667] kthread+0x118/0x140 [ 194.190358] ret_from_fork+0x1f/0x30 [ 194.193670] </TASK> In this case calling skb_orphan_frags() updated nr_frags leaving nrfrags local variable in skb_segment() stale. This resulted in the code hitting i >= nrfrags prematurely and trying to move to next frag_skb using list_skb pointer, which was NULL, and caused kernel panic. Move the call to zero copy functions before using frags and nr_frags. Fixes: bf5c25d6 ("skbuff: in skb_segment, call zerocopy functions once per nskb") Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com> Reported-by: Amit Goyal <agoyal@purestorage.com> Cc: stable@vger.kernel.org Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-