- Sep 05, 2022
-
-
Quanyang Wang authored
commit 0c7d7cc2 upstream. There are two problems with the current code of memory_intersects: First, it doesn't check whether the region (begin, end) falls inside the region (virt, vend), that is (virt < begin && vend > end). The second problem is if vend is equal to begin, it will return true but this is wrong since vend (virt + size) is not the last address of the memory region but (virt + size -1) is. The wrong determination will trigger the misreporting when the function check_for_illegal_area calls memory_intersects to check if the dma region intersects with stext region. The misreporting is as below (stext is at 0x80100000): WARNING: CPU: 0 PID: 77 at kernel/dma/debug.c:1073 check_for_illegal_area+0x130/0x168 DMA-API: chipidea-usb2 e0002000.usb: device driver maps memory from kernel text or rodata [addr=800f0000] [len=65536] Modules linked in: CPU: 1 PID: 77 Comm: usb-storage Not tainted 5.19.0-yocto-standard #5 Hardware name: Xilinx Zynq Platform unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x58/0x70 dump_stack_lvl from __warn+0xb0/0x198 __warn from warn_slowpath_fmt+0x80/0xb4 warn_slowpath_fmt from check_for_illegal_area+0x130/0x168 check_for_illegal_area from debug_dma_map_sg+0x94/0x368 debug_dma_map_sg from __dma_map_sg_attrs+0x114/0x128 __dma_map_sg_attrs from dma_map_sg_attrs+0x18/0x24 dma_map_sg_attrs from usb_hcd_map_urb_for_dma+0x250/0x3b4 usb_hcd_map_urb_for_dma from usb_hcd_submit_urb+0x194/0x214 usb_hcd_submit_urb from usb_sg_wait+0xa4/0x118 usb_sg_wait from usb_stor_bulk_transfer_sglist+0xa0/0xec usb_stor_bulk_transfer_sglist from usb_stor_bulk_srb+0x38/0x70 usb_stor_bulk_srb from usb_stor_Bulk_transport+0x150/0x360 usb_stor_Bulk_transport from usb_stor_invoke_transport+0x38/0x440 usb_stor_invoke_transport from usb_stor_control_thread+0x1e0/0x238 usb_stor_control_thread from kthread+0xf8/0x104 kthread from ret_from_fork+0x14/0x2c Refactor memory_intersects to fix the two problems above. Before the 1d7db834 ("dma-debug: use memory_intersects() directly"), memory_intersects is called only by printk_late_init: printk_late_init -> init_section_intersects ->memory_intersects. There were few places where memory_intersects was called. When commit 1d7db834 ("dma-debug: use memory_intersects() directly") was merged and CONFIG_DMA_API_DEBUG is enabled, the DMA subsystem uses it to check for an illegal area and the calltrace above is triggered. [akpm@linux-foundation.org: fix nearby comment typo] Link: https://lkml.kernel.org/r/20220819081145.948016-1-quanyang.wang@windriver.com Fixes: 97955936 ("asm/sections: add helpers to check for section data") Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thierry Reding <treding@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Siddh Raman Pant authored
commit c490a0b5 upstream. The userspace can configure a loop using an ioctl call, wherein a configuration of type loop_config is passed (see lo_ioctl()'s case on line 1550 of drivers/block/loop.c). This proceeds to call loop_configure() which in turn calls loop_set_status_from_info() (see line 1050 of loop.c), passing &config->info which is of type loop_info64*. This function then sets the appropriate values, like the offset. loop_device has lo_offset of type loff_t (see line 52 of loop.c), which is typdef-chained to long long, whereas loop_info64 has lo_offset of type __u64 (see line 56 of include/uapi/linux/loop.h). The function directly copies offset from info to the device as follows (See line 980 of loop.c): lo->lo_offset = info->lo_offset; This results in an overflow, which triggers a warning in iomap_iter() due to a call to iomap_iter_done() which has: WARN_ON_ONCE(iter->iomap.offset > iter->pos); Thus, check for negative value during loop_set_status_from_info(). Bug report: https://syzkaller.appspot.com/bug?id=c620fe14aac810396d3c3edc9ad73848bf69a29e Reported-and-tested-by: <syzbot+a8e049cd3abd342936b6@syzkaller.appspotmail.com> Cc: stable@vger.kernel.org Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Siddh Raman Pant <code@siddh.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220823160810.181275-1-code@siddh.me Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Goldwyn Rodrigues authored
commit b5111127 upstream. For a filesystem which has btrfs read-only property set to true, all write operations including xattr should be denied. However, security xattr can still be changed even if btrfs ro property is true. This happens because xattr_permission() does not have any restrictions on security.*, system.* and in some cases trusted.* from VFS and the decision is left to the underlying filesystem. See comments in xattr_permission() for more details. This patch checks if the root is read-only before performing the set xattr operation. Testcase: DEV=/dev/vdb MNT=/mnt mkfs.btrfs -f $DEV mount $DEV $MNT echo "file one" > $MNT/f1 setfattr -n "security.one" -v 2 $MNT/f1 btrfs property set /mnt ro true setfattr -n "security.one" -v 1 $MNT/f1 umount $MNT CC: stable@vger.kernel.org # 4.9+ Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jacob Keller authored
[ Upstream commit 25d7a5f5 ] The ixgbe_ptp_start_cyclecounter is intended to be called whenever the cyclecounter parameters need to be changed. Since commit a9763f3c ("ixgbe: Update PTP to support X550EM_x devices"), this function has cleared the SYSTIME registers and reset the TSAUXC DISABLE_SYSTIME bit. While these need to be cleared during ixgbe_ptp_reset, it is wrong to clear them during ixgbe_ptp_start_cyclecounter. This function may be called during both reset and link status change. When link changes, the SYSTIME counter is still operating normally, but the cyclecounter should be updated to account for the possibly changed parameters. Clearing SYSTIME when link changes causes the timecounter to jump because the cycle counter now reads zero. Extract the SYSTIME initialization out to a new function and call this during ixgbe_ptp_reset. This prevents the timecounter adjustment and avoids an unnecessary reset of the current time. This also restores the original SYSTIME clearing that occurred during ixgbe_ptp_reset before the commit above. Reported-by: Steve Payne <spayne@aurora.tech> Reported-by: Ilya Evenbach <ievenbach@aurora.tech> Fixes: a9763f3c ("ixgbe: Update PTP to support X550EM_x devices") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Kuniyuki Iwashima authored
[ Upstream commit 3c9ba81d ] While reading sysctl_somaxconn, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Kuniyuki Iwashima authored
[ Upstream commit fa45d484 ] While reading netdev_budget_usecs, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 7acf8a1e ("Replace 2 jiffies with sysctl netdev_budget_usecs to enable softirq tuning") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Kuniyuki Iwashima authored
[ Upstream commit 2e0c4237 ] While reading netdev_budget, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 51b0bded ("[NET]: Separate two usages of netdev_max_backlog.") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Kuniyuki Iwashima authored
[ Upstream commit e59ef36f ] While reading sysctl_net_busy_read, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 2d48d67f ("net: poll/select low latency socket support") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Kuniyuki Iwashima authored
[ Upstream commit c42b7cdd ] While reading sysctl_net_busy_poll, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 06021292 ("net: add low latency socket poll") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Kuniyuki Iwashima authored
[ Upstream commit d2154b0a ] While reading sysctl_tstamp_allow_data, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: b245be1f ("net-timestamp: no-payload only sysctl") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Kuniyuki Iwashima authored
[ Upstream commit 6bae8ceb ] While reading rs->interval and rs->burst, they can be changed concurrently via sysctl (e.g. net_ratelimit_state). Thus, we need to add READ_ONCE() to their readers. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Kuniyuki Iwashima authored
[ Upstream commit bf955b5a ] While reading weight_p, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Also, dev_[rt]x_weight can be read/written at the same time. So, we need to use READ_ONCE() and WRITE_ONCE() for its access. Moreover, to use the same weight_p while changing dev_[rt]x_weight, we add a mutex in proc_do_dev_weight(). Fixes: 3d48b53f ("net: dev_weight: TX/RX orthogonality") Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Pablo Neira Ayuso authored
[ Upstream commit 7044ab28 ] Instead report ERANGE if csum_offset is too long, and EOPNOTSUPP if type is not support. Fixes: 7ec3f7b4 ("netfilter: nft_payload: add packet mangling support") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Pablo Neira Ayuso authored
[ Upstream commit 94254f99 ] Instead of offset and length are truncation to u8, report ERANGE. Fixes: 96518518 ("netfilter: add nftables") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Florian Westphal authored
[ Upstream commit 7997eff8 ] Harshit Mogalapalli says: In ebt_do_table() function dereferencing 'private->hook_entry[hook]' can lead to NULL pointer dereference. [..] Kernel panic: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] [..] RIP: 0010:ebt_do_table+0x1dc/0x1ce0 Code: 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 5c 16 00 00 48 b8 00 00 00 00 00 fc ff df 49 8b 6c df 08 48 8d 7d 2c 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 88 [..] Call Trace: nf_hook_slow+0xb1/0x170 __br_forward+0x289/0x730 maybe_deliver+0x24b/0x380 br_flood+0xc6/0x390 br_dev_xmit+0xa2e/0x12c0 For some reason ebtables rejects blobs that provide entry points that are not supported by the table, but what it should instead reject is the opposite: blobs that DO NOT provide an entry point supported by the table. t->valid_hooks is the bitmask of hooks (input, forward ...) that will see packets. Providing an entry point that is not support is harmless (never called/used), but the inverse isn't: it results in a crash because the ebtables traverser doesn't expect a NULL blob for a location its receiving packets for. Instead of fixing all the individual checks, do what iptables is doing and reject all blobs that differ from the expected hooks. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Maciej Żenczykowski authored
[ Upstream commit 4b2e3a17 ] Looks to have been left out in an oversight. Cc: Mahesh Bandewar <maheshb@google.com> Cc: Sainath Grandhi <sainath.grandhi@intel.com> Fixes: 235a9d89 ('ipvtap: IP-VLAN based tap driver') Signed-off-by: Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20220821130808.12143-1-zenczykowski@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jonathan Toppins authored
[ Upstream commit d745b506 ] This is caused by the global variable ad_ticks_per_sec being zero as demonstrated by the reproducer script discussed below. This causes all timer values in __ad_timer_to_ticks to be zero, resulting in the periodic timer to never fire. To reproduce: Run the script in `tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh` which puts bonding into a state where it never transmits LACPDUs. line 44: ip link add fbond type bond mode 4 miimon 200 \ xmit_hash_policy 1 ad_actor_sys_prio 65535 lacp_rate fast setting bond param: ad_actor_sys_prio given: params.ad_actor_system = 0 call stack: bond_option_ad_actor_sys_prio() -> bond_3ad_update_ad_actor_settings() -> set ad.system.sys_priority = bond->params.ad_actor_sys_prio -> ad.system.sys_mac_addr = bond->dev->dev_addr; because params.ad_actor_system == 0 results: ad.system.sys_mac_addr = bond->dev->dev_addr line 48: ip link set fbond address 52:54:00:3B:7C:A6 setting bond MAC addr call stack: bond->dev->dev_addr = new_mac line 52: ip link set fbond type bond ad_actor_sys_prio 65535 setting bond param: ad_actor_sys_prio given: params.ad_actor_system = 0 call stack: bond_option_ad_actor_sys_prio() -> bond_3ad_update_ad_actor_settings() -> set ad.system.sys_priority = bond->params.ad_actor_sys_prio -> ad.system.sys_mac_addr = bond->dev->dev_addr; because params.ad_actor_system == 0 results: ad.system.sys_mac_addr = bond->dev->dev_addr line 60: ip link set veth1-bond down master fbond given: params.ad_actor_system = 0 params.mode = BOND_MODE_8023AD ad.system.sys_mac_addr == bond->dev->dev_addr call stack: bond_enslave -> bond_3ad_initialize(); because first slave -> if ad.system.sys_mac_addr != bond->dev->dev_addr return results: Nothing is run in bond_3ad_initialize() because dev_addr equals sys_mac_addr leaving the global ad_ticks_per_sec zero as it is never initialized anywhere else. The if check around the contents of bond_3ad_initialize() is no longer needed due to commit 5ee14e6d ("bonding: 3ad: apply ad_actor settings changes immediately") which sets ad.system.sys_mac_addr if any one of the bonding parameters whos set function calls bond_3ad_update_ad_actor_settings(). This is because if ad.system.sys_mac_addr is zero it will be set to the current bond mac address, this causes the if check to never be true. Fixes: 5ee14e6d ("bonding: 3ad: apply ad_actor settings changes immediately") Signed-off-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Bernard Pidoux authored
[ Upstream commit 3c53cd65 ] Commit 3b3fd068 added NULL check for `rose_loopback_neigh->dev` in rose_loopback_timer() but omitted to check rose_loopback_neigh->loopback. It thus prevents *all* rose connect. The reason is that a special rose_neigh loopback has a NULL device. /proc/net/rose_neigh illustrates it via rose_neigh_show() function : [...] seq_printf(seq, "%05d %-9s %-4s %3d %3d %3s %3s %3lu %3lu", rose_neigh->number, (rose_neigh->loopback) ? "RSLOOP-0" : ax2asc(buf, &rose_neigh->callsign), rose_neigh->dev ? rose_neigh->dev->name : "???", rose_neigh->count, /proc/net/rose_neigh displays special rose_loopback_neigh->loopback as callsign RSLOOP-0: addr callsign dev count use mode restart t0 tf digipeaters 00001 RSLOOP-0 ??? 1 2 DCE yes 0 0 By checking rose_loopback_neigh->loopback, rose_rx_call_request() is called even in case rose_loopback_neigh->dev is NULL. This repairs rose connections. Verification with rose client application FPAC: FPAC-Node v 4.1.3 (built Aug 5 2022) for LINUX (help = h) F6BVP-4 (Commands = ?) : u Users - AX.25 Level 2 sessions : Port Callsign Callsign AX.25 state ROSE state NetRom status axudp F6BVP-5 -> F6BVP-9 Connected Connected --------- Fixes: 3b3fd068 ("rose: Fix Null pointer dereference in rose_send_frame()") Signed-off-by: Bernard Pidoux <f6bvp@free.fr> Suggested-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Thomas DL9SAU Osterried <thomas@osterried.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Herbert Xu authored
[ Upstream commit ba953a9d ] When namespace support was added to xfrm/afkey, it caused the previously single-threaded call to xfrm_probe_algs to become multi-threaded. This is buggy and needs to be fixed with a mutex. Reported-by: Abhishek Shah <abhishek.shah@columbia.edu> Fixes: 283bc9f3 ("xfrm: Namespacify xfrm state/policy locks") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Xin Xiong authored
[ Upstream commit 9c9cb23e ] The issue happens on an error path in __xfrm_policy_check(). When the fetching process of the object `pols[1]` fails, the function simply returns 0, forgetting to decrement the reference count of `pols[0]`, which is incremented earlier by either xfrm_sk_policy_lookup() or xfrm_policy_lookup(). This may result in memory leaks. Fix it by decreasing the reference count of `pols[0]` in that path. Fixes: 134b0fc5 ("IPsec: propagate security module errors up from flow_cache_lookup") Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Basavaraj Natikar authored
commit b8c824a8 upstream. Saving/restoring interrupt and wake status bits across suspend can cause the suspend to fail if an IRQ is serviced across the suspend cycle. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Fixes: 79d2c8be ("pinctrl/amd: save pin registers over suspend/resume") Link: https://lore.kernel.org/r/20220613064127.220416-3-Basavaraj.Natikar@amd.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Helge Deller authored
commit 7ae1f550 upstream. The exception handler is broken for unaligned memory acceses with fldw and fstw instructions, because it trashes or uses randomly some other floating point register than the one specified in the instruction word on loads and stores. The instruction "fldw 0(addr),%fr22L" (and the other fldw/fstw instructions) encode the target register (%fr22) in the rightmost 5 bits of the instruction word. The 7th rightmost bit of the instruction word defines if the left or right half of %fr22 should be used. While processing unaligned address accesses, the FR3() define is used to extract the offset into the local floating-point register set. But the calculation in FR3() was buggy, so that for example instead of %fr22, register %fr12 [((22 * 2) & 0x1f) = 12] was used. This bug has been since forever in the parisc kernel and I wonder why it wasn't detected earlier. Interestingly I noticed this bug just because the libime debian package failed to build on *native* hardware, while it successfully built in qemu. This patch corrects the bitshift and masking calculation in FR3(). Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gaosheng Cui authored
commit ad982c3b upstream. Audit_alloc_mark() assign pathname to audit_mark->path, on error path from fsnotify_add_inode_mark(), fsnotify_put_mark will free memory of audit_mark->path, but the caller of audit_alloc_mark will free the pathname again, so there will be double free problem. Fix this by resetting audit_mark->path to NULL pointer on error path from fsnotify_add_inode_mark(). Cc: stable@vger.kernel.org Fixes: 7b129323 ("fsnotify: Add group pointer in fsnotify_init_mark()") Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- Aug 25, 2022
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20220823080053.202747790@linuxfoundation.org Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nathan Chancellor authored
[ Upstream commit 74de14fe ] When CONFIG_XPA is enabled, Clang warns: arch/mips/mm/tlbex.c:629:24: error: converting the result of '<<' to a boolean; did you mean '(1 << _PAGE_NO_EXEC_SHIFT) != 0'? [-Werror,-Wint-in-bool-context] if (cpu_has_rixi && !!_PAGE_NO_EXEC) { ^ arch/mips/include/asm/pgtable-bits.h:174:28: note: expanded from macro '_PAGE_NO_EXEC' # define _PAGE_NO_EXEC (1 << _PAGE_NO_EXEC_SHIFT) ^ arch/mips/mm/tlbex.c:2568:24: error: converting the result of '<<' to a boolean; did you mean '(1 << _PAGE_NO_EXEC_SHIFT) != 0'? [-Werror,-Wint-in-bool-context] if (!cpu_has_rixi || !_PAGE_NO_EXEC) { ^ arch/mips/include/asm/pgtable-bits.h:174:28: note: expanded from macro '_PAGE_NO_EXEC' # define _PAGE_NO_EXEC (1 << _PAGE_NO_EXEC_SHIFT) ^ 2 errors generated. _PAGE_NO_EXEC can be '0' or '1 << _PAGE_NO_EXEC_SHIFT' depending on the build and runtime configuration, which is what the negation operators are trying to convey. To silence the warning, explicitly compare against 0 so the result of the '<<' operator is not implicitly converted to a boolean. According to its documentation, GCC enables -Wint-in-bool-context with -Wall but this warning is not visible when building the same configuration with GCC. It appears GCC only warns when compiling C++, not C, although the documentation makes no note of this: https://godbolt.org/z/x39q3brxf Reported-by: Sudip Mukherjee (Codethink) <sudipm.mukherjee@gmail.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Zheyu Ma authored
[ Upstream commit 40bf722f ] Since the user can control the arguments of the ioctl() from the user space, under special arguments that may result in a divide-by-zero bug. If the user provides an improper 'pixclock' value that makes the argumet of i740_calc_vclk() less than 'I740_RFREQ_FIX', it will cause a divide-by-zero bug in: drivers/video/fbdev/i740fb.c:353 p_best = min(15, ilog2(I740_MAX_VCO_FREQ / (freq / I740_RFREQ_FIX))); The following log can reveal it: divide error: 0000 [#1] PREEMPT SMP KASAN PTI RIP: 0010:i740_calc_vclk drivers/video/fbdev/i740fb.c:353 [inline] RIP: 0010:i740fb_decode_var drivers/video/fbdev/i740fb.c:646 [inline] RIP: 0010:i740fb_set_par+0x163f/0x3b70 drivers/video/fbdev/i740fb.c:742 Call Trace: fb_set_var+0x604/0xeb0 drivers/video/fbdev/core/fbmem.c:1034 do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1110 fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1189 Fix this by checking the argument of i740_calc_vclk() first. Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Zhouyi Zhou authored
[ Upstream commit ca829e05 ] On 64-bit, calling jump_label_init() in setup_feature_keys() is too late because static keys may be used in subroutines of parse_early_param() which is again subroutine of early_init_devtree(). For example booting with "threadirqs": static_key_enable_cpuslocked(): static key '0xc000000002953260' used before call to jump_label_init() WARNING: CPU: 0 PID: 0 at kernel/jump_label.c:166 static_key_enable_cpuslocked+0xfc/0x120 ... NIP static_key_enable_cpuslocked+0xfc/0x120 LR static_key_enable_cpuslocked+0xf8/0x120 Call Trace: static_key_enable_cpuslocked+0xf8/0x120 (unreliable) static_key_enable+0x30/0x50 setup_forced_irqthreads+0x28/0x40 do_early_param+0xa0/0x108 parse_args+0x290/0x4e0 parse_early_options+0x48/0x5c parse_early_param+0x58/0x84 early_init_devtree+0xd4/0x518 early_setup+0xb4/0x214 So call jump_label_init() just before parse_early_param() in early_init_devtree(). Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com> [mpe: Add call trace to change log and minor wording edits.] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220726015747.11754-1-zhouzhouyi@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Steve French authored
[ Upstream commit 5fa2cffb ] Coverity complains about assigning a pointer based on value length before checking that value length goes beyond the end of the SMB. Although this is even more unlikely as value length is a single byte, and the pointer is not dereferenced until laterm, it is clearer to check the lengths first. Addresses-Coverity: 1467704 ("Speculative execution data leak") Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Takashi Iwai authored
[ Upstream commit 95cc637c ] For avoiding the potential deadlock via kill_fasync() call, use the new fasync helpers to defer the invocation from PCI API. Note that it's merely a workaround. Reported-by: <syzbot+1ee0910eca9c94f71f25@syzkaller.appspotmail.com> Reported-by: <syzbot+49b10793b867871ee26f@syzkaller.appspotmail.com> Reported-by: <syzbot+8285e973a41b5aa68902@syzkaller.appspotmail.com> Link: https://lore.kernel.org/r/20220728125945.29533-3-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Takashi Iwai authored
[ Upstream commit ef34a0ae ] Currently the call of kill_fasync() from an interrupt handler might lead to potential spin deadlocks, as spotted by syzkaller. Unfortunately, it's not so trivial to fix this lock chain as it's involved with the tasklist_lock that is touched in allover places. As a temporary workaround, this patch provides the way to defer the async signal notification in a work. The new helper functions, snd_fasync_helper() and snd_kill_faync() are replacements for fasync_helper() and kill_fasync(), respectively. In addition, snd_fasync_free() needs to be called at the destructor of the relevant file object. Link: https://lore.kernel.org/r/20220728125945.29533-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Liang He authored
[ Upstream commit 7a9f743c ] We should call of_node_put() for the reference 'uctl_node' returned by of_get_parent() which will increase the refcount. Otherwise, there will be a refcount leak bug. Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Schspa Shi authored
[ Upstream commit 6641085e ] On buffer resize failure, vfio_info_cap_add() will free the buffer, report zero for the size, and return -ENOMEM. As additional hardening, also clear the buffer pointer to prevent any chance of a double free. Signed-off-by: Schspa Shi <schspa@gmail.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Link: https://lore.kernel.org/r/20220629022948.55608-1-schspa@gmail.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Liang He authored
[ Upstream commit d24d7bb2 ] In soc_info(), of_find_node_by_type() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. Acked-by: Timur Tabi <timur@kernel.org> Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220618060850.4058525-1-windhl@126.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Kiselev, Oleg authored
[ Upstream commit 69cb8e9d ] This patch avoids an attempt to resize the filesystem to an unaligned cluster boundary. An online resize to a size that is not integral to cluster size results in the last iteration attempting to grow the fs by a negative amount, which trips a BUG_ON and leaves the fs with a corrupted in-memory superblock. Signed-off-by: Oleg Kiselev <okiselev@amazon.com> Link: https://lore.kernel.org/r/0E92A0AB-4F16-4F1A-94B7-702CC6504FDE@amazon.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Ye Bin authored
[ Upstream commit b24e77ef ] Now if check directoy entry is corrupted, ext4_empty_dir may return true then directory will be removed when file system mounted with "errors=continue". In order not to make things worse just return false when directory is corrupted. Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220622090223.682234-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Wentao_Liang authored
[ Upstream commit 10421247 ] In line 2884, "raid5_release_stripe(sh);" drops the reference to sh and may cause sh to be released. However, sh is subsequently used in lines 2886 "if (sh->batch_head && sh != sh->batch_head)". This may result in an use-after-free bug. It can be fixed by moving "raid5_release_stripe(sh);" to the bottom of the function. Signed-off-by: Wentao_Liang <Wentao_Liang_g@163.com> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Christophe JAILLET authored
[ Upstream commit 3a15b45b ] A bitmap_zalloc() must be balanced by a corresponding bitmap_free() in the error handling path of afu_allocate_irqs(). Acked-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/ce5869418f5838187946eb6b11a52715a93ece3d.1657566849.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jozef Martiniak authored
[ Upstream commit 04cb742d ] after usb_ep_queue() if wait_for_completion_interruptible() is interrupted we need to wait until IRQ gets finished. Otherwise complete() from epio_complete() can corrupt stack. Signed-off-by: Jozef Martiniak <jomajm@gmail.com> Link: https://lore.kernel.org/r/20220708070645.6130-1-jomajm@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Robert Marko authored
[ Upstream commit 1bf7305e ] Once the usb sleep clocks are disabled, clock framework is trying to disable the sleep clock source also. However, it seems that it cannot be disabled and trying to do so produces: [ 245.436390] ------------[ cut here ]------------ [ 245.441233] gcc_sleep_clk_src status stuck at 'on' [ 245.441254] WARNING: CPU: 2 PID: 223 at clk_branch_wait+0x130/0x140 [ 245.450435] Modules linked in: xhci_plat_hcd xhci_hcd dwc3 dwc3_qcom leds_gpio [ 245.456601] CPU: 2 PID: 223 Comm: sh Not tainted 5.18.0-rc4 #215 [ 245.463889] Hardware name: Xiaomi AX9000 (DT) [ 245.470050] pstate: 204000c5 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 245.474307] pc : clk_branch_wait+0x130/0x140 [ 245.481073] lr : clk_branch_wait+0x130/0x140 [ 245.485588] sp : ffffffc009f2bad0 [ 245.489838] x29: ffffffc009f2bad0 x28: ffffff8003e6c800 x27: 0000000000000000 [ 245.493057] x26: 0000000000000000 x25: 0000000000000000 x24: ffffff800226ef20 [ 245.500175] x23: ffffffc0089ff550 x22: 0000000000000000 x21: ffffffc008476ad0 [ 245.507294] x20: 0000000000000000 x19: ffffffc00965ac70 x18: fffffffffffc51a7 [ 245.514413] x17: 68702e3030303837 x16: 3a6d726f6674616c x15: ffffffc089f2b777 [ 245.521531] x14: ffffffc0095c9d18 x13: 0000000000000129 x12: 0000000000000129 [ 245.528649] x11: 00000000ffffffea x10: ffffffc009621d18 x9 : 0000000000000001 [ 245.535767] x8 : 0000000000000001 x7 : 0000000000017fe8 x6 : 0000000000000001 [ 245.542885] x5 : ffffff803fdca6d8 x4 : 0000000000000000 x3 : 0000000000000027 [ 245.550002] x2 : 0000000000000027 x1 : 0000000000000023 x0 : 0000000000000026 [ 245.557122] Call trace: [ 245.564229] clk_branch_wait+0x130/0x140 [ 245.566490] clk_branch2_disable+0x2c/0x40 [ 245.570656] clk_core_disable+0x60/0xb0 [ 245.574561] clk_core_disable+0x68/0xb0 [ 245.578293] clk_disable+0x30/0x50 [ 245.582113] dwc3_qcom_remove+0x60/0xc0 [dwc3_qcom] [ 245.585588] platform_remove+0x28/0x60 [ 245.590361] device_remove+0x4c/0x80 [ 245.594179] device_release_driver_internal+0x1dc/0x230 [ 245.597914] device_driver_detach+0x18/0x30 [ 245.602861] unbind_store+0xec/0x110 [ 245.607027] drv_attr_store+0x24/0x40 [ 245.610847] sysfs_kf_write+0x44/0x60 [ 245.614405] kernfs_fop_write_iter+0x128/0x1c0 [ 245.618052] new_sync_write+0xc0/0x130 [ 245.622391] vfs_write+0x1d4/0x2a0 [ 245.626123] ksys_write+0x58/0xe0 [ 245.629508] __arm64_sys_write+0x1c/0x30 [ 245.632895] invoke_syscall.constprop.0+0x5c/0x110 [ 245.636890] do_el0_svc+0xa0/0x150 [ 245.641488] el0_svc+0x18/0x60 [ 245.644872] el0t_64_sync_handler+0xa4/0x130 [ 245.647914] el0t_64_sync+0x174/0x178 [ 245.652340] ---[ end trace 0000000000000000 ]--- So, add CLK_IS_CRITICAL flag to the clock so that the kernel won't try to disable the sleep clock. Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220515210048.483898-10-robimarko@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Liang He authored
[ Upstream commit 40a959d7 ] In ohci_hcd_ppc_of_probe(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220617034637.4003115-1-windhl@126.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-