- Aug 04, 2021
-
-
Wang Hai authored
[ Upstream commit 76a16be0 ] Replace pci_enable_device() with pcim_enable_device(), pci_disable_device() and pci_release_regions() will be called in release automatically. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Marcelo Ricardo Leitner authored
[ Upstream commit 557fb586 ] As Ben Hutchings noticed, this check should have been inverted: the call returns true in case of success. Reported-by: Ben Hutchings <ben@decadent.org.uk> Fixes: 0c5dc070 ("sctp: validate from_addr_param return") Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Dima Chumak authored
[ Upstream commit b1c2f631 ] The result of __dev_get_by_index() is not checked for NULL and then gets dereferenced immediately. Also, __dev_get_by_index() must be called while holding either RTNL lock or @dev_base_lock, which isn't satisfied by mlx5e_hairpin_get_mdev() or its callers. This makes the underlying hlist_for_each_entry() loop not safe, and can have adverse effects in itself. Fix by using dev_get_by_index() and handling nullptr return value when ifindex device is not found. Update mlx5e_hairpin_get_mdev() callers to check for possible PTR_ERR() result. Fixes: 77ab67b7 ("net/mlx5e: Basic setup of hairpin object") Addresses-Coverity: ("Dereference null return value") Signed-off-by: Dima Chumak <dchumak@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Maor Gottlieb authored
[ Upstream commit 8b54874e ] Fix a bug when flow table is created in priority that already has other flow tables as shown in the below diagram. If the new flow table (FT-B) has the lowest level in the priority, we need to connect the flow tables from the previous priority (p0) to this new table. In addition when this flow table is destroyed (FT-B), we need to connect the flow tables from the previous priority (p0) to the next level flow table (FT-C) in the same priority of the destroyed table (if exists). --------- |root_ns| --------- | -------------------------------- | | | ---------- ---------- --------- |p(prio)-x| | p-y | | p-n | ---------- ---------- --------- | | ---------------- ------------------ |ns(e.g bypass)| |ns(e.g. kernel) | ---------------- ------------------ | | | ------- ------ ---- | p0 | | p1 | |p2| ------- ------ ---- | | \ -------- ------- ------ | FT-A | |FT-B | |FT-C| -------- ------- ------ Fixes: f90edfd2 ("net/mlx5_core: Connect flow tables") Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Cong Wang authored
[ Upstream commit 8063e184 ] sk_psock_destroy() is a RCU callback, I can't see any reason why it could be used outside. Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jakub Sitnicki <jakub@cloudflare.com> Cc: Lorenz Bauer <lmb@cloudflare.com> Link: https://lore.kernel.org/bpf/20210127221501.46866-1-xiyou.wangcong@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Bjorn Andersson authored
[ Upstream commit f9a39932 ] Some bootloaders set the widebus enable bit in the INTF_CONFIG register, but configuration of widebus isn't yet supported ensure that the register has a known value, with widebus disabled. Fixes: c943b494 ("drm/msm/dp: add displayPort driver support") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20210722024434.3313167-1-bjorn.andersson@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Robert Foss authored
[ Upstream commit b910a020 ] The downstream dts lists this value as 0x494, and not 0x45c. Fixes: af776a3e ("drm/msm/dpu: add SM8250 to hw catalog") Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Link: https://lore.kernel.org/r/20210628085033.9905-1-robert.foss@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Pavel Skripkin authored
[ Upstream commit c7c9d210 ] Syzbot reported skb_over_panic() in llc_pdu_init_as_xid_cmd(). The problem was in wrong LCC header manipulations. Syzbot's reproducer tries to send XID packet. llc_ui_sendmsg() is doing following steps: 1. skb allocation with size = len + header size len is passed from userpace and header size is 3 since addr->sllc_xid is set. 2. skb_reserve() for header_len = 3 3. filling all other space with memcpy_from_msg() Ok, at this moment we have fully loaded skb, only headers needs to be filled. Then code comes to llc_sap_action_send_xid_c(). This function pushes 3 bytes for LLC PDU header and initializes it. Then comes llc_pdu_init_as_xid_cmd(). It initalizes next 3 bytes *AFTER* LLC PDU header and call skb_push(skb, 3). This looks wrong for 2 reasons: 1. Bytes rigth after LLC header are user data, so this function was overwriting payload. 2. skb_push(skb, 3) call can cause skb_over_panic() since all free space was filled in llc_ui_sendmsg(). (This can happen is user passed 686 len: 686 + 14 (eth header) + 3 (LLC header) = 703. SKB_DATA_ALIGN(703) = 704) So, in this patch I added 2 new private constansts: LLC_PDU_TYPE_U_XID and LLC_PDU_LEN_U_XID. LLC_PDU_LEN_U_XID is used to correctly reserve header size to handle LLC + XID case. LLC_PDU_TYPE_U_XID is used by llc_pdu_header_init() function to push 6 bytes instead of 3. And finally I removed skb_push() call from llc_pdu_init_as_xid_cmd(). This changes should not affect other parts of LLC, since after all steps we just transmit buffer. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-and-tested-by: <syzbot+5e5a981ad7cc54c4b2b4@syzkaller.appspotmail.com> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Vitaly Kuznetsov authored
[ Upstream commit 0a31df68 ] MSR_KVM_ASYNC_PF_ACK MSR is part of interrupt based asynchronous page fault interface and not the original (deprecated) KVM_FEATURE_ASYNC_PF. This is stated in Documentation/virt/kvm/msr.rst. Fixes: 66570e96 ("kvm: x86: only provide PV features if enabled in guest's CPUID") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Oliver Upton <oupton@google.com> Message-Id: <20210722123018.260035-1-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jiapeng Chong authored
[ Upstream commit 7e4960b3 ] The error code is missing in this code scenario, add the error code '-EINVAL' to the return value 'err'. Eliminate the follow smatch warning: drivers/net/ethernet/mellanox/mlx4/main.c:3538 mlx4_load_one() warn: missing error code 'err'. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Fixes: 7ae0e400 ("net/mlx4_core: Flexible (asymmetric) allocation of EQs and MSI-X vectors for PF/VFs") Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Geetha sowjanya authored
[ Upstream commit 69f0aeb1 ] In the existing code while changing the number of TX/RX queues using ethtool the PF/VF interface resources are freed and reallocated (otx2_stop and otx2_open is called) if the device is in running state. If any resource allocation fails in otx2_open, driver free already allocated resources and return. But again, when the number of queues changes as the device state still running oxt2_stop is called. In which we try to free already freed resources leading to driver crash. This patch fixes the issue by setting the INTF_DOWN flag on error and free the resources in otx2_stop only if the flag is not set. Fixes: 50fe6c02 ("octeontx2-pf: Register and handle link notifications") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <Sunil.Goutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Xin Long authored
[ Upstream commit 3cf4375a ] One skb's skb_shinfo frags are not writable, and they can be shared with other skbs' like by pskb_copy(). To write the frags may cause other skb's data crash. So before doing en/decryption, skb_cow_data() should always be called for a cloned or nonlinear skb if req dst is using the same sg as req src. While at it, the likely branch can be removed, as it will be covered by skb_cow_data(). Note that esp_input() has the same issue, and I will fix it in another patch. tipc_aead_encrypt() doesn't have this issue, as it only processes linear data in the unlikely branch. Fixes: fc1b6d6d ("tipc: introduce TIPC encryption & authentication") Reported-by: Shuang Li <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Shannon Nelson authored
[ Upstream commit f07f9815 ] Be sure to count the csum_none cases when csum offload is enabled. Fixes: 0f3154e6 ("ionic: Add Tx and Rx handling") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Shannon Nelson authored
[ Upstream commit 76ed8a4a ] We need to count the correct Tx and/or Rx packets for dynamic interrupt moderation, depending on which we're processing on the queue interrupt. Fixes: 04a83459 ("ionic: dynamic interrupt moderation") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Shannon Nelson authored
[ Upstream commit a6ff85e0 ] Move the interrupt coalesce value update out of the napi thread and into the dim_work thread and set it only when it has actually changed. Fixes: 04a83459 ("ionic: dynamic interrupt moderation") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Pavel Skripkin authored
[ Upstream commit 52f3456a ] Syzbot reported memory leak in qrtr. The problem was in unputted struct sock. qrtr_local_enqueue() function calls qrtr_port_lookup() which takes sock reference if port was found. Then there is the following check: if (!ipc || &ipc->sk == skb->sk) { ... return -ENODEV; } Since we should drop the reference before returning from this function and ipc can be non-NULL inside this if, we should add qrtr_port_put() inside this if. The similar corner case is in qrtr_endpoint_post() as Manivannan reported. In case of sock_queue_rcv_skb() failure we need to put port reference to avoid leaking struct sock pointer. Fixes: e04df98a ("net: qrtr: Remove receive worker") Fixes: bdabad3e ("net: Add Qualcomm IPC router") Reported-and-tested-by: <syzbot+35a511c72ea7356cdcf3@syzkaller.appspotmail.com> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Gilad Naaman authored
[ Upstream commit 227adfb2 ] In cases where the header straight after the tunnel header was another ethernet header (TEB), instead of the network header, the ECN decapsulation code would treat the ethernet header as if it was an IP header, resulting in mishandling and possible wrong drops or corruption of the IP header. In this case, ECT(1) is sent, so IP_ECN_decapsulate tries to copy it to the inner IPv4 header, and correct its checksum. The offset of the ECT bits in an IPv4 header corresponds to the lower 2 bits of the second octet of the destination MAC address in the ethernet header. The IPv4 checksum corresponds to end of the source address. In order to reproduce: $ ip netns add A $ ip netns add B $ ip -n A link add _v0 type veth peer name _v1 netns B $ ip -n A link set _v0 up $ ip -n A addr add dev _v0 10.254.3.1/24 $ ip -n A route add default dev _v0 scope global $ ip -n B link set _v1 up $ ip -n B addr add dev _v1 10.254.1.6/24 $ ip -n B route add default dev _v1 scope global $ ip -n B link add gre1 type gretap local 10.254.1.6 remote 10.254.3.1 key 0x49000000 $ ip -n B link set gre1 up # Now send an IPv4/GRE/Eth/IPv4 frame where the outer header has ECT(1), # and the inner header has no ECT bits set: $ cat send_pkt.py #!/usr/bin/env python3 from scapy.all import * pkt = IP(b'E\x01\x00\xa7\x00\x00\x00\x00@/`%\n\xfe\x03\x01\n\xfe\x01\x06 \x00eXI\x00' b'\x00\x00\x18\xbe\x92\xa0\xee&\x18\xb0\x92\xa0l&\x08\x00E\x00\x00}\x8b\x85' b'@\x00\x01\x01\xe4\xf2\x82\x82\x82\x01\x82\x82\x82\x02\x08\x00d\x11\xa6\xeb' b'3\x1e\x1e\\xf3\\xf7`\x00\x00\x00\x00ZN\x00\x00\x00\x00\x00\x00\x10\x11\x12' b'\x13\x14\x15\x16\x17\x18\x19\x1a\x1b\x1c\x1d\x1e\x1f !"#$%&\'()*+,-./01234' b'56789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ') send(pkt) $ sudo ip netns exec B tcpdump -neqlllvi gre1 icmp & ; sleep 1 $ sudo ip netns exec A python3 send_pkt.py In the original packet, the source/destinatio MAC addresses are dst=18:be:92:a0:ee:26 src=18:b0:92:a0:6c:26 In the received packet, they are dst=18:bd:92:a0:ee:26 src=18:b0:92:a0:6c:27 Thanks to Lahav Schlesinger <lschlesinger@drivenets.com> and Isaac Garzon <isaac@speed.io> for helping me pinpoint the origin. Fixes: b7237487 ("tunnel: Propagate ECT(1) when decapsulating as recommended by RFC6040") Cc: David S. Miller <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David Ahern <dsahern@kernel.org> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Gilad Naaman <gnaaman@drivenets.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Hoang Le authored
[ Upstream commit d237a7f1 ] The release_sock() is blocking function, it would change the state after sleeping. In order to evaluate the stated condition outside the socket lock context, switch to use wait_woken() instead. Fixes: 6398e23c ("tipc: standardize accept routine") Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Xin Long authored
[ Upstream commit f8dd60de ] For implicit-connect, when it's either SYN- or SYN+, an ACK should be sent back to the client immediately. It's not appropriate for the client to enter established state only after receiving data from the server. On client side, after the SYN is sent out, tipc_wait_for_connect() should be called to wait for the ACK if timeout is set. This patch also restricts __tipc_sendstream() to call __sendmsg() only when it's in TIPC_OPEN state, so that the client can program in a single loop doing both connecting and data sending like: for (...) sendmsg(dest, buf); This makes the implicit-connect more implicit. Fixes: b97bf3fd ("[TIPC] Initial merge") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jedrzej Jagielski authored
[ Upstream commit ea52faae ] Fix missing failed message if driver does not have enough queues to complete TC command. Without this fix no message is displayed in dmesg. Fixes: a9ce82f7 ("i40e: Enable 'channel' mode in mqprio for TC configs") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jedrzej Jagielski authored
[ Upstream commit 89ec1f08 ] In SW DCB mode the packets sent receive incorrect UP tags. They are constructed correctly and put into tx_ring, but UP is later remapped by HW on the basis of TCTUPR register contents according to Tx queue selected, and BW used is consistent with the new UP values. This is caused by Tx queue selection in kernel not taking into account DCB configuration. This patch fixes the issue by implementing the ndo_select_queue NDO callback. Fixes: fd0a05ce ("i40e: transmit, receive, and NAPI") Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Arkadiusz Kubalewski authored
[ Upstream commit 71d6fdba ] Make warning meaningful for the user. Previously the trace: "Starting FW LLDP agent failed: error: I40E_ERR_ADMIN_QUEUE_ERROR, I40E_AQ_RC_EAGAIN" was produced when user tried to start Firmware LLDP agent, just after it was stopped with sequence: ethtool --set-priv-flags <dev> disable-fw-lldp on ethtool --set-priv-flags <dev> disable-fw-lldp off (without any delay between the commands) At that point the firmware is still processing stop command, the behavior is expected. Fixes: c1041d07 ("i40e: Missing response checks in driver when starting/stopping FW LLDP") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Arkadiusz Kubalewski authored
[ Upstream commit 65662a8d ] Correct the message flow between driver and firmware when disabling queues. Previously in case of PF reset (due to required reinit after reconfig), the error like: "VSI seid 397 Tx ring 60 disable timeout" could show up occasionally. The error was not a real issue of hardware or firmware, it was caused by wrong sequence of messages invoked by the driver. Fixes: 41c445ff ("i40e: main driver core") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Pablo Neira Ayuso authored
[ Upstream commit a33f387e ] nft_nat reports a bogus EAFNOSUPPORT if no layer 3 information is specified. Fixes: d07db988 ("netfilter: nf_tables: introduce nft_validate_register_load()") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Florian Westphal authored
[ Upstream commit 30a56a2b ] In case the entry is evicted via garbage collection there is delay between the timeout value and the eviction event. This adjusts the stop value based on how much time has passed. Fixes: b87a2f91 ("netfilter: conntrack: add gc worker to remove timed-out entries") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Felix Fietkau authored
[ Upstream commit a5d3cbdb ] Notify the driver about the 4-address mode change and also send a nulldata packet to the AP to notify it about the change Fixes: 1ff4e8f2 ("mac80211: notify the driver when a sta uses 4-address mode") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210702050111.47546-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Lorenz Bauer authored
[ Upstream commit d6371c76 ] We got the following UBSAN report on one of our testing machines: ================================================================================ UBSAN: array-index-out-of-bounds in kernel/bpf/syscall.c:2389:24 index 6 is out of range for type 'char *[6]' CPU: 43 PID: 930921 Comm: systemd-coredum Tainted: G O 5.10.48-cloudflare-kasan-2021.7.0 #1 Hardware name: <snip> Call Trace: dump_stack+0x7d/0xa3 ubsan_epilogue+0x5/0x40 __ubsan_handle_out_of_bounds.cold+0x43/0x48 ? seq_printf+0x17d/0x250 bpf_link_show_fdinfo+0x329/0x380 ? bpf_map_value_size+0xe0/0xe0 ? put_files_struct+0x20/0x2d0 ? __kasan_kmalloc.constprop.0+0xc2/0xd0 seq_show+0x3f7/0x540 seq_read_iter+0x3f8/0x1040 seq_read+0x329/0x500 ? seq_read_iter+0x1040/0x1040 ? __fsnotify_parent+0x80/0x820 ? __fsnotify_update_child_dentry_flags+0x380/0x380 vfs_read+0x123/0x460 ksys_read+0xed/0x1c0 ? __x64_sys_pwrite64+0x1f0/0x1f0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 <snip> ================================================================================ ================================================================================ UBSAN: object-size-mismatch in kernel/bpf/syscall.c:2384:2 From the report, we can infer that some array access in bpf_link_show_fdinfo at index 6 is out of bounds. The obvious candidate is bpf_link_type_strs[BPF_LINK_TYPE_XDP] with BPF_LINK_TYPE_XDP == 6. It turns out that BPF_LINK_TYPE_XDP is missing from bpf_types.h and therefore doesn't have an entry in bpf_link_type_strs: pos: 0 flags: 02000000 mnt_id: 13 link_type: (null) link_id: 4 prog_tag: bcf7977d3b93787c prog_id: 4 ifindex: 1 Fixes: aa8d3a71 ("bpf, xdp: Add bpf_link-based XDP attachment API") Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210719085134.43325-2-lmb@cloudflare.com Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Naresh Kumar PBS authored
[ Upstream commit 0c23af52 ] Statistical counters are not incrementing in some adapter versions with newer FW. This is due to the stats context length mismatch between FW and driver. Since the L2 driver updates the length correctly, use the stats length from L2 driver while allocating the DMA'able memory and creating the stats context. Fixes: 9d6b648c ("bnxt_en: Update firmware interface spec to 1.10.1.65.") Link: https://lore.kernel.org/r/1626010296-6076-1-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Nguyen Dinh Phi authored
commit f9a5c358 upstream. When we exceed the limit of BSS entries, this function will free the new entry, however, at this time, it is the last door to access the inputed ies, so these ies will be unreferenced objects and cause memory leak. Therefore we should free its ies before deallocating the new entry, beside of dropping it from hidden_list. Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com> Link: https://lore.kernel.org/r/20210628132334.851095-1-phind.uet@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Krzysztof Kozlowski authored
commit 5e7b30d2 upstream. There is a use after free memory corruption during module exit: - nfcsim_exit() - nfcsim_device_free(dev0) - nfc_digital_unregister_device() This iterates over command queue and frees all commands, - dev->up = false - nfcsim_link_shutdown() - nfcsim_link_recv_wake() This wakes the sleeping thread nfcsim_link_recv_skb(). - nfcsim_link_recv_skb() Wake from wait_event_interruptible_timeout(), call directly the deb->cb callback even though (dev->up == false), - digital_send_cmd_complete() Dereference of "struct digital_cmd" cmd which was freed earlier by nfc_digital_unregister_device(). This causes memory corruption shortly after (with unrelated stack trace): nfc nfc0: NFC: nfcsim_recv_wq: Device is down llcp: nfc_llcp_recv: err -19 nfc nfc1: NFC: nfcsim_recv_wq: Device is down BUG: unable to handle page fault for address: ffffffffffffffed Call Trace: fsnotify+0x54b/0x5c0 __fsnotify_parent+0x1fe/0x300 ? vfs_write+0x27c/0x390 vfs_write+0x27c/0x390 ksys_write+0x63/0xe0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae KASAN report: BUG: KASAN: use-after-free in digital_send_cmd_complete+0x16/0x50 Write of size 8 at addr ffff88800a05f720 by task kworker/0:2/71 Workqueue: events nfcsim_recv_wq [nfcsim] Call Trace: dump_stack_lvl+0x45/0x59 print_address_description.constprop.0+0x21/0x140 ? digital_send_cmd_complete+0x16/0x50 ? digital_send_cmd_complete+0x16/0x50 kasan_report.cold+0x7f/0x11b ? digital_send_cmd_complete+0x16/0x50 ? digital_dep_link_down+0x60/0x60 digital_send_cmd_complete+0x16/0x50 nfcsim_recv_wq+0x38f/0x3d5 [nfcsim] ? nfcsim_in_send_cmd+0x4a/0x4a [nfcsim] ? lock_is_held_type+0x98/0x110 ? finish_wait+0x110/0x110 ? rcu_read_lock_sched_held+0x9c/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x12e/0x1f0 This flow of calling digital_send_cmd_complete() callback on driver exit is specific to nfcsim which implements reading and sending work queues. Since the NFC digital device was unregistered, the callback should not be called. Fixes: 204bddcb ("NFC: nfcsim: Make use of the Digital layer") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tejun Heo authored
commit 5ab189cf upstream. iocg_wake_fn() open-codes wait_queue_entry removal and wakeup because it wants the wq_entry to be always removed whether it ended up waking the task or not. finish_wait() tests whether wq_entry needs removal without grabbing the wait_queue lock and expects the waker to use list_del_init_careful() after all waking operations are complete, which iocg_wake_fn() didn't do. The operation order was wrong and the regular list_del_init() was used. The result is that if a waiter wakes up racing the waker, it can free pop the wq_entry off stack before the waker is still looking at it, which can lead to a backtrace like the following. [7312084.588951] general protection fault, probably for non-canonical address 0x586bf4005b2b88: 0000 [#1] SMP ... [7312084.647079] RIP: 0010:queued_spin_lock_slowpath+0x171/0x1b0 ... [7312084.858314] Call Trace: [7312084.863548] _raw_spin_lock_irqsave+0x22/0x30 [7312084.872605] try_to_wake_up+0x4c/0x4f0 [7312084.880444] iocg_wake_fn+0x71/0x80 [7312084.887763] __wake_up_common+0x71/0x140 [7312084.895951] iocg_kick_waitq+0xe8/0x2b0 [7312084.903964] ioc_rqos_throttle+0x275/0x650 [7312084.922423] __rq_qos_throttle+0x20/0x30 [7312084.930608] blk_mq_make_request+0x120/0x650 [7312084.939490] generic_make_request+0xca/0x310 [7312084.957600] submit_bio+0x173/0x200 [7312084.981806] swap_readpage+0x15c/0x240 [7312084.989646] read_swap_cache_async+0x58/0x60 [7312084.998527] swap_cluster_readahead+0x201/0x320 [7312085.023432] swapin_readahead+0x2df/0x450 [7312085.040672] do_swap_page+0x52f/0x820 [7312085.058259] handle_mm_fault+0xa16/0x1420 [7312085.066620] do_page_fault+0x2c6/0x5c0 [7312085.074459] page_fault+0x2f/0x40 Fix it by switching to list_del_init_careful() and putting it at the end. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Rik van Riel <riel@surriel.com> Fixes: 7caa4715 ("blkcg: implement blk-iocost") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jiri Kosina authored
commit d47255d3 upstream. This reverts commit 4192f7b5. It is not true (as stated in the reverted commit changelog) that we never unmap the BAR on failure; it actually does happen properly on amdgpu_driver_load_kms() -> amdgpu_driver_unload_kms() -> amdgpu_device_fini() error path. What's worse, this commit actually completely breaks resource freeing on probe failure (like e.g. failure to load microcode), as amdgpu_driver_unload_kms() notices adev->rmmio being NULL and bails too early, leaving all the resources that'd normally be freed in amdgpu_acpi_fini() and amdgpu_device_fini() still hanging around, leading to all sorts of oopses when someone tries to, for example, access the sysfs and procfs resources which are still around while the driver is gone. Fixes: 4192f7b5 ("drm/amdgpu: unmap register bar on device init failure") Reported-by: Vojtech Pavlik <vojtech@ucw.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jiri Kosina authored
commit 6aade587 upstream. In case when psp_init_asd_microcode() fails to load ASD microcode file, psp_v12_0_init_microcode() tries to print the firmware filename that failed to load before bailing out. This is wrong because: - the firmware filename it would want it print is an incorrect one as psp_init_asd_microcode() and psp_v12_0_init_microcode() are loading different filenames - it tries to print fw_name, but that's not yet been initialized by that time, so it prints random stack contents, e.g. amdgpu 0000:04:00.0: Direct firmware load for amdgpu/renoir_asd.bin failed with error -2 amdgpu 0000:04:00.0: amdgpu: fail to initialize asd microcode amdgpu 0000:04:00.0: amdgpu: psp v12.0: Failed to load firmware "\xfeTO\x8e\xff\xff" Fix that by bailing out immediately, instead of priting the bogus error message. Reported-by: Vojtech Pavlik <vojtech@ucw.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dale Zhao authored
commit b53e041d upstream. [Why] We don't check DENTIST_DISPCLK_CHG_DONE to ensure dentist display clockis updated to target value. In some scenarios with large display clock margin, it will deliver unfinished display clock and cause issues like display black screen. [How] Checking DENTIST_DISPCLK_CHG_DONE to ensure display clock has been update to target value before driver do other clock related actions. Reviewed-by: Cyr Aric <aric.cyr@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Dale Zhao <dale.zhao@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paul Jakma authored
commit 15bbf8bb upstream. Commit 7930742d, reverting 26fd962b, missed out on reverting an incorrect change to a return value. The niu_pci_vpd_scan_props(..) == 1 case appears to be a normal path - treating it as an error and return -EINVAL was breaking VPD_SCAN and causing the driver to fail to load. Fix, so my Neptune card works again. Cc: Kangjie Lu <kjlu@umn.edu> Cc: Shannon Nelson <shannon.lee.nelson@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> Fixes: 7930742d ('Revert "niu: fix missing checks of niu_pci_eeprom_read"') Signed-off-by: Paul Jakma <paul@jakma.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jason Gerecke authored
commit 6ca2350e upstream. Commit 670e9092 ("HID: wacom: support named keys on older devices") added support for sending named events from the soft buttons on the 24HDT and 27QHDT. In the process, however, it inadvertantly disabled the touchscreen of the 24HDT and 27QHDT by default. The `wacom_set_shared_values` function would normally enable touch by default but because it checks the state of the non-shared `has_mute_touch_switch` flag and `wacom_setup_touch_input_capabilities` sets the state of the /shared/ version, touch ends up being disabled by default. This patch sets the non-shared flag, letting `wacom_set_shared_values` take care of copying the value over to the shared version and setting the default touch state to "on". Fixes: 670e9092 ("HID: wacom: support named keys on older devices") CC: stable@vger.kernel.org # 5.4+ Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Ping Cheng <ping.cheng@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mike Rapoport authored
commit 640b7ea5 upstream. The memory reserved by console/PALcode or non-volatile memory is not added to memblock.memory. Since commit fa3354e4 (mm: free_area_init: use maximal zone PFNs rather than zone sizes) the initialization of the memory map relies on the accuracy of memblock.memory to properly calculate zone sizes. The holes in memblock.memory caused by absent regions reserved by the firmware cause incorrect initialization of struct pages which leads to BUG() during the initial page freeing: BUG: Bad page state in process swapper pfn:2ffc53 page:fffffc000ecf14c0 refcount:0 mapcount:1 mapping:0000000000000000 index:0x0 flags: 0x0() raw: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 raw: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 page dumped because: nonzero mapcount Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 5.7.0-03841-gfa3354e4ea39-dirty #26 fffffc0001b5bd68 fffffc0001b5be80 fffffc00011cd148 fffffc000ecf14c0 fffffc00019803df fffffc0001b5be80 fffffc00011ce340 fffffc000ecf14c0 0000000000000000 fffffc0001b5be80 fffffc0001b482c0 fffffc00027d6618 fffffc00027da7d0 00000000002ff97a 0000000000000000 fffffc0001b5be80 fffffc00011d1abc fffffc000ecf14c0 fffffc0002d00000 fffffc0001b5be80 fffffc0001b2350c 0000000000300000 fffffc0001b48298 fffffc0001b482c0 Trace: [<fffffc00011cd148>] bad_page+0x168/0x1b0 [<fffffc00011ce340>] free_pcp_prepare+0x1e0/0x290 [<fffffc00011d1abc>] free_unref_page+0x2c/0xa0 [<fffffc00014ee5f0>] cmp_ex_sort+0x0/0x30 [<fffffc00014ee5f0>] cmp_ex_sort+0x0/0x30 [<fffffc000101001c>] _stext+0x1c/0x20 Fix this by registering the reserved ranges in memblock.memory. Link: https://lore.kernel.org/lkml/20210726192311.uffqnanxw3ac5wwi@ivybridge Fixes: fa3354e4 ("mm: free_area_init: use maximal zone PFNs rather than zone sizes") Reported-by: Matt Turner <mattst88@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pavel Skripkin authored
commit 928150fa upstream. In esd_usb2_setup_rx_urbs() MAX_RX_URBS coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see esd_usb2_setup_rx_urbs) and this flag cannot be used with coherent buffers. So, all allocated buffers should be freed with usb_free_coherent() explicitly. Side note: This code looks like a copy-paste of other can drivers. The same patch was applied to mcba_usb driver and it works nice with real hardware. There is no change in functionality, only clean-up code for coherent buffers. Fixes: 96d8e903 ("can: Add driver for esd CAN-USB/2 device") Link: https://lore.kernel.org/r/b31b096926dcb35998ad0271aac4b51770ca7cc8.1627404470.git.paskripkin@gmail.com Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pavel Skripkin authored
commit 9969e3c5 upstream. In ems_usb_start() MAX_RX_URBS coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see ems_usb_start) and this flag cannot be used with coherent buffers. So, all allocated buffers should be freed with usb_free_coherent() explicitly. Side note: This code looks like a copy-paste of other can drivers. The same patch was applied to mcba_usb driver and it works nice with real hardware. There is no change in functionality, only clean-up code for coherent buffers. Fixes: 702171ad ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface") Link: https://lore.kernel.org/r/59aa9fbc9a8cbf9af2bbd2f61a659c480b415800.1627404470.git.paskripkin@gmail.com Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pavel Skripkin authored
commit 0e865f0c upstream. In usb_8dev_start() MAX_RX_URBS coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see usb_8dev_start) and this flag cannot be used with coherent buffers. So, all allocated buffers should be freed with usb_free_coherent() explicitly. Side note: This code looks like a copy-paste of other can drivers. The same patch was applied to mcba_usb driver and it works nice with real hardware. There is no change in functionality, only clean-up code for coherent buffers. Fixes: 0024d8ad ("can: usb_8dev: Add support for USB2CAN interface from 8 devices") Link: https://lore.kernel.org/r/d39b458cd425a1cf7f512f340224e6e9563b07bd.1627404470.git.paskripkin@gmail.com Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-