- Jan 05, 2022
-
-
Takashi Iwai authored
[ Upstream commit 9222ba68 ] We've got a bug report about the non-working keyboard on ASUS ZenBook UX425UA. It seems that the PS/2 device isn't ready immediately at boot but takes some seconds to get ready. Until now, the only workaround is to defer the probe, but it's available only when the driver is a module. However, many distros, including openSUSE as in the original report, build the PS/2 input drivers into kernel, hence it won't work easily. This patch adds the support for the deferred probe for i8042 stuff as a workaround of the problem above. When the deferred probe mode is enabled and the device couldn't be probed, it'll be repeated with the standard deferred probe mechanism. The deferred probe mode is enabled either via the new option i8042.probe_defer or via the quirk table entry. As of this patch, the quirk table contains only ASUS ZenBook UX425UA. The deferred probe part is based on Fabio's initial work. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1190256 Signed-off-by:
Takashi Iwai <tiwai@suse.de> Tested-by:
Samuel Čavoj <samuel@cavoj.net> Link: https://lore.kernel.org/r/20211117063757.11380-1-tiwai@suse.de Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jens Wiklander authored
commit dfd0743f upstream. Since the tee subsystem does not keep a strong reference to its idle shared memory buffers, it races with other threads that try to destroy a shared memory through a close of its dma-buf fd or by unmapping the memory. In tee_shm_get_from_id() when a lookup in teedev->idr has been successful, it is possible that the tee_shm is in the dma-buf teardown path, but that path is blocked by the teedev mutex. Since we don't have an API to tell if the tee_shm is in the dma-buf teardown path or not we must find another way of detecting this condition. Fix this by doing the reference counting directly on the tee_shm using a new refcount_t refcount field. dma-buf is replaced by using anon_inode_getfd() instead, this separates the life-cycle of the underlying file from the tee_shm. tee_shm_put() is updated to hold the mutex when decreasing the refcount to 0 and then remove the tee_shm from teedev->idr before releasing the mutex. This means that the tee_shm can never be found unless it has a refcount larger than 0. Fixes: 967c9cca ("tee: generic TEE subsystem") Cc: stable@vger.kernel.org Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
Lars Persson <larper@axis.com> Reviewed-by:
Sumit Garg <sumit.garg@linaro.org> Reported-by:
Patrik Lantz <patrik.lantz@axis.com> [JW: backport to 4.19-stable] Signed-off-by:
Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hans de Goede authored
commit c4f0126d upstream. Since commit 4bc43a42 ("HID: asus: Add hid_is_using_ll_driver(usb_hid_driver) check") the hid-asus.c depends on the usb_hid_driver symbol. Add a depends on USB_HID to Kconfig to fix missing symbols errors in hid-asus when USB_HID is not enabled. Fixes: 4bc43a42 ("HID: asus: Add hid_is_using_ll_driver(usb_hid_driver) check") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Cc: Jason Self <jason@bluehome.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- Dec 29, 2021
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20211227151319.379265346@linuxfoundation.org Tested-by:
Pavel Machek (CIP) <pavel@denx.de> Tested-by:
Hulk Robot <hulkrobot@huawei.com> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Tested-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rémi Denis-Courmont authored
commit 75a2f315 upstream. This ioctl() implicitly assumed that the socket was already bound to a valid local socket name, i.e. Phonet object. If the socket was not bound, two separate problems would occur: 1) We'd send an pipe enablement request with an invalid source object. 2) Later socket calls could BUG on the socket unexpectedly being connected yet not bound to a valid object. Reported-by:
<syzbot+2dc91e7fc3dea88b1e8a@syzkaller.appspotmail.com> Signed-off-by:
Rémi Denis-Courmont <remi@remlab.net> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lin Ma authored
commit b2f37aea upstream. The previous commit 3e0588c2 ("hamradio: defer ax25 kfree after unregister_netdev") reorder the kfree operations and unregister_netdev operation to prevent UAF. This commit improves the previous one by also deferring the nullify of the ax->tty pointer. Otherwise, a NULL pointer dereference bug occurs. Partial of the stack trace is shown below. BUG: kernel NULL pointer dereference, address: 0000000000000538 RIP: 0010:ax_xmit+0x1f9/0x400 ... Call Trace: dev_hard_start_xmit+0xec/0x320 sch_direct_xmit+0xea/0x240 __qdisc_run+0x166/0x5c0 __dev_queue_xmit+0x2c7/0xaf0 ax25_std_establish_data_link+0x59/0x60 ax25_connect+0x3a0/0x500 ? security_socket_connect+0x2b/0x40 __sys_connect+0x96/0xc0 ? __hrtimer_init+0xc0/0xc0 ? common_nsleep+0x2e/0x50 ? switch_fpu_return+0x139/0x1a0 __x64_sys_connect+0x11/0x20 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The crash point is shown as below static void ax_encaps(...) { ... set_bit(TTY_DO_WRITE_WAKEUP, &ax->tty->flags); // ax->tty = NULL! ... } By placing the nullify action after the unregister_netdev, the ax->tty pointer won't be assigned as NULL net_device framework layer is well synchronized. Signed-off-by:
Lin Ma <linma@zju.edu.cn> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lin Ma authored
commit 3e0588c2 upstream. There is a possible race condition (use-after-free) like below (USE) | (FREE) ax25_sendmsg | ax25_queue_xmit | dev_queue_xmit | __dev_queue_xmit | __dev_xmit_skb | sch_direct_xmit | ... xmit_one | netdev_start_xmit | tty_ldisc_kill __netdev_start_xmit | mkiss_close ax_xmit | kfree ax_encaps | | Even though there are two synchronization primitives before the kfree: 1. wait_for_completion(&ax->dead). This can prevent the race with routines from mkiss_ioctl. However, it cannot stop the routine coming from upper layer, i.e., the ax25_sendmsg. 2. netif_stop_queue(ax->dev). It seems that this line of code aims to halt the transmit queue but it fails to stop the routine that already being xmit. This patch reorder the kfree after the unregister_netdev to avoid the possible UAF as the unregister_netdev() is well synchronized and won't return if there is a running routine. Signed-off-by:
Lin Ma <linma@zju.edu.cn> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lin Ma authored
commit 1ade48d0 upstream. The existing cleanup routine implementation is not well synchronized with the syscall routine. When a device is detaching, below race could occur. static int ax25_sendmsg(...) { ... lock_sock() ax25 = sk_to_ax25(sk); if (ax25->ax25_dev == NULL) // CHECK ... ax25_queue_xmit(skb, ax25->ax25_dev->dev); // USE ... } static void ax25_kill_by_device(...) { ... if (s->ax25_dev == ax25_dev) { s->ax25_dev = NULL; ... } Other syscall functions like ax25_getsockopt, ax25_getname, ax25_info_show also suffer from similar races. To fix them, this patch introduce lock_sock() into ax25_kill_by_device in order to guarantee that the nullify action in cleanup routine cannot proceed when another socket request is pending. Signed-off-by:
Hanjie Wu <nagi@zju.edu.cn> Signed-off-by:
Lin Ma <linma@zju.edu.cn> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Guenter Roeck authored
commit cdc5287a upstream. Bit 7 of the status register indicates that the chip is busy doing a conversion. It does not indicate an alarm status. Stop reporting it as alarm status bit. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sean Christopherson authored
commit 0ff29701 upstream. Update the documentation for kvm-intel's emulate_invalid_guest_state to rectify the description of KVM's default behavior, and to document that the behavior and thus parameter only applies to L1. Fixes: a27685c3 ("KVM: VMX: Emulate invalid guest state by default") Signed-off-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20211207193006.120997-4-seanjc@google.com> Reviewed-by:
Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marian Postevca authored
commit 890d5b40 upstream. When listening for notifications through netlink of a new interface being registered, sporadically, it is possible for the MAC to be read as zero. The zero MAC address lasts a short period of time and then switches to a valid random MAC address. This causes problems for netd in Android, which assumes that the interface is malfunctioning and will not use it. In the good case we get this log: InterfaceController::getCfg() ifName usb0 hwAddr 92:a8:f0:73:79:5b ipv4Addr 0.0.0.0 flags 0x1002 In the error case we get these logs: InterfaceController::getCfg() ifName usb0 hwAddr 00:00:00:00:00:00 ipv4Addr 0.0.0.0 flags 0x1002 netd : interfaceGetCfg("usb0") netd : interfaceSetCfg() -> ServiceSpecificException (99, "[Cannot assign requested address] : ioctl() failed") The reason for the issue is the order in which the interface is setup, it is first registered through register_netdev() and after the MAC address is set. Fixed by first setting the MAC address of the net_device and after that calling register_netdev(). Fixes: bcd4a1c4 ("usb: gadget: u_ether: construct with default values and add setters/getters") Cc: stable@vger.kernel.org Signed-off-by:
Marian Postevca <posteuca@mutex.one> Link: https://lore.kernel.org/r/20211204214912.17627-1-posteuca@mutex.one Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chao Yu authored
commit 5598b24efaf4892741c798b425d543e4bed357a1 upstream. As Wenqing Liu reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215235 - Overview page fault in f2fs_setxattr() when mount and operate on corrupted image - Reproduce tested on kernel 5.16-rc3, 5.15.X under root 1. unzip tmp7.zip 2. ./single.sh f2fs 7 Sometimes need to run the script several times - Kernel dump loop0: detected capacity change from 0 to 131072 F2FS-fs (loop0): Found nat_bits in checkpoint F2FS-fs (loop0): Mounted with checkpoint version = 7548c2ee BUG: unable to handle page fault for address: ffffe47bc7123f48 RIP: 0010:kfree+0x66/0x320 Call Trace: __f2fs_setxattr+0x2aa/0xc00 [f2fs] f2fs_setxattr+0xfa/0x480 [f2fs] __f2fs_set_acl+0x19b/0x330 [f2fs] __vfs_removexattr+0x52/0x70 __vfs_removexattr_locked+0xb1/0x140 vfs_removexattr+0x56/0x100 removexattr+0x57/0x80 path_removexattr+0xa3/0xc0 __x64_sys_removexattr+0x17/0x20 do_syscall_64+0x37/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae The root cause is in __f2fs_setxattr(), we missed to do sanity check on last xattr entry, result in out-of-bound memory access during updating inconsistent xattr data of target inode. After the fix, it can detect such xattr inconsistency as below: F2FS-fs (loop11): inode (7) has invalid last xattr entry, entry_size: 60676 F2FS-fs (loop11): inode (8) has corrupted xattr F2FS-fs (loop11): inode (8) has corrupted xattr F2FS-fs (loop11): inode (8) has invalid last xattr entry, entry_size: 47736 Cc: stable@vger.kernel.org Reported-by:
Wenqing Liu <wenqingliu0120@gmail.com> Signed-off-by:
Chao Yu <chao@kernel.org> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> [delete f2fs_err() call as it's not in older kernels - gregkh] Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ard Biesheuvel authored
commit 8536a5ef upstream. The Thumb2 version of the FP exception handling entry code treats the register holding the CP number (R8) differently, resulting in the iWMMXT CP number check to be incorrect. Fix this by unifying the ARM and Thumb2 code paths, and switch the order of the additions of the TI_USED_CP offset and the shifted CP index. Cc: <stable@vger.kernel.org> Fixes: b86040a5 ("Thumb-2: Implementation of the unified start-up and exceptions code") Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Fabien Dessenne authored
commit b67210cc upstream. Consider the GPIO controller offset (from "gpio-ranges") to compute the maximum GPIO line number. This fixes an issue where gpio-ranges uses a non-null offset. e.g.: gpio-ranges = <&pinctrl 6 86 10> In that case the last valid GPIO line is not 9 but 15 (6 + 10 - 1) Cc: stable@vger.kernel.org Fixes: 67e2996f ("pinctrl: stm32: fix the reported number of GPIO lines per bank") Reported-by:
Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by:
Fabien Dessenne <fabien.dessenne@foss.st.com> Link: https://lore.kernel.org/r/20211215095808.621716-1-fabien.dessenne@foss.st.com Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andrew Cooper authored
commit 57690554 upstream. Both __pkru_allows_write() and arch_set_user_pkey_access() shift PKRU_WD_BIT (a signed constant) by up to 30 bits, hitting the sign bit. Use unsigned constants instead. Clearly pkey 15 has not been used in combination with UBSAN yet. Noticed by code inspection only. I can't actually provoke the compiler into generating incorrect logic as far as this shift is concerned. [ dhansen: add stable@ tag, plus minor changelog massaging, For anyone doing backports, these #defines were in arch/x86/include/asm/pgtable.h before 784a4661. ] Fixes: 33a709b2 ("mm/gup, x86/mm/pkeys: Check VMAs and PTEs for protection keys") Signed-off-by:
Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20211216000856.4480-1-andrew.cooper3@citrix.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
John David Anglin authored
commit 8f66fce0 upstream. The completer in the "or,ev %r1,%r30,%r30" instruction is reversed, so we are not clipping the LWS number when we are called from a 32-bit process (W=0). We need to nulify the following depdi instruction when the least-significant bit of %r30 is 1. If the %r20 register is not clipped, a user process could perform a LWS call that would branch to an undefined location in the kernel and potentially crash the machine. Signed-off-by:
John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # 4.19+ Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thadeu Lima de Souza Cascardo authored
commit 75d70d76 upstream. If the workqueue allocation fails, the driver is marked as not initialized, and timer and panic_notifier will be left registered. Instead of removing those when workqueue allocation fails, do the workqueue initialization before doing it, and cleanup srcu_struct if it fails. Fixes: 1d49eb91 ("ipmi: Move remove_work to dedicated workqueue") Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Cc: Corey Minyard <cminyard@mvista.com> Cc: Ioanna Alifieraki <ioanna-maria.alifieraki@canonical.com> Cc: stable@vger.kernel.org Message-Id: <20211217154410.1228673-2-cascardo@canonical.com> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thadeu Lima de Souza Cascardo authored
commit 2b5160b1 upstream. In case, init_srcu_struct fails (because of memory allocation failure), we might proceed with the driver initialization despite srcu_struct not being entirely initialized. Fixes: 913a89f0 ("ipmi: Don't initialize anything in the core until something uses it") Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Cc: Corey Minyard <cminyard@mvista.com> Cc: stable@vger.kernel.org Message-Id: <20211217154410.1228673-1-cascardo@canonical.com> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
José Expósito authored
commit 12f247ab upstream. The "id_buf" buffer is stored in "data->raw_info_block" and freed by "mxt_free_object_table" in case of error. Return instead of jumping to avoid a double free. Addresses-Coverity-ID: 1474582 ("Double free") Fixes: 068bdb67 ("Input: atmel_mxt_ts - fix the firmware update") Signed-off-by:
José Expósito <jose.exposito89@gmail.com> Link: https://lore.kernel.org/r/20211212194257.68879-1-jose.exposito89@gmail.com Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Colin Ian King authored
commit 2dee54b2 upstream. Static analysis with scan-build has found an assignment to vp2 that is never used. It seems that the check on vp->state > 0 should be actually on vp2->state instead. Fix this. This dates back to 2002, I found the offending commit from the git history git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git , commit 91e39521bbf6 ("[PATCH] ALSA patch for 2.5.4") Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211212172025.470367-1-colin.i.king@gmail.com Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xiaoke Wang authored
commit c01c1db1 upstream. kstrdup() can return NULL, it is better to check the return value of it. Signed-off-by:
Xiaoke Wang <xkernel.wang@foxmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/tencent_094816F3522E0DC704056C789352EBBF0606@qq.com Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Guenter Roeck authored
[ Upstream commit fce15c45 ] The detect function had a comment "Make compiler happy" when id did not read the second configuration register. As it turns out, the code was checking the contents of this register for manufacturer ID 0xA1 (NXP Semiconductor/Philips), but never actually read the register. So it wasn't surprising that the compiler complained, and it indeed had a point. Fix the code to read the register contents for manufacturer ID 0xa1. At the same time, the code was reading the register for manufacturer ID 0x41 (Analog Devices), but it was not using the results. In effect it was just checking if reading the register returned an error. That doesn't really add much if any value, so stop doing that. Fixes: f90be42f ("hwmon: (lm90) Refactor reading of config2 register") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
蒋家盛 authored
[ Upstream commit 9b8bdd1e ] Because of the possible failure of the kcalloc, it should be better to set rx_queue->page_ptr_mask to 0 when it happens in order to maintain the consistency. Fixes: 5a6681e2 ("sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver") Signed-off-by:
Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by:
Martin Habets <habetsm.xilinx@gmail.com> Link: https://lore.kernel.org/r/20211220140344.978408-1-jiasheng@iscas.ac.cn Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
蒋家盛 authored
[ Upstream commit cb93b3e1 ] Because platform_get_irq() could fail and return error irq. Therefore, it might be better to check it if order to avoid the use of error irq. Fixes: ae150435 ("smsc: Move the SMC (SMSC) drivers") Signed-off-by:
Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
蒋家盛 authored
[ Upstream commit db6d6afe ] I find that platform_get_irq() will not always succeed. It will return error irq in case of the failure. Therefore, it might be better to check it if order to avoid the use of error irq. Fixes: 658d439b ("fjes: Introduce FUJITSU Extended Socket Network Device driver") Signed-off-by:
Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Fernando Fernandez Mancera authored
[ Upstream commit 1c15b05b ] When 802.3ad bond mode is configured the ad_actor_system option is set to "00:00:00:00:00:00". But when trying to set the all-zeroes MAC as actors' system address it was failing with EINVAL. An all-zeroes ethernet address is valid, only multicast addresses are not valid values. Fixes: 171a42c3 ("bonding: add netlink support for sys prio, actor sys mac, and port key") Signed-off-by:
Fernando Fernandez Mancera <ffmancera@riseup.net> Acked-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20211221111345.2462-1-ffmancera@riseup.net Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Wu Bo authored
[ Upstream commit ffb76a86 ] Hi, When testing install and uninstall of ipmi_si.ko and ipmi_msghandler.ko, the system crashed. The log as follows: [ 141.087026] BUG: unable to handle kernel paging request at ffffffffc09b3a5a [ 141.087241] PGD 8fe4c0d067 P4D 8fe4c0d067 PUD 8fe4c0f067 PMD 103ad89067 PTE 0 [ 141.087464] Oops: 0010 [#1] SMP NOPTI [ 141.087580] CPU: 67 PID: 668 Comm: kworker/67:1 Kdump: loaded Not tainted 4.18.0.x86_64 #47 [ 141.088009] Workqueue: events 0xffffffffc09b3a40 [ 141.088009] RIP: 0010:0xffffffffc09b3a5a [ 141.088009] Code: Bad RIP value. [ 141.088009] RSP: 0018:ffffb9094e2c3e88 EFLAGS: 00010246 [ 141.088009] RAX: 0000000000000000 RBX: ffff9abfdb1f04a0 RCX: 0000000000000000 [ 141.088009] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 [ 141.088009] RBP: 0000000000000000 R08: ffff9abfffee3cb8 R09: 00000000000002e1 [ 141.088009] R10: ffffb9094cb73d90 R11: 00000000000f4240 R12: ffff9abfffee8700 [ 141.088009] R13: 0000000000000000 R14: ffff9abfdb1f04a0 R15: ffff9abfdb1f04a8 [ 141.088009] FS: 0000000000000000(0000) GS:ffff9abfffec0000(0000) knlGS:0000000000000000 [ 141.088009] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 141.088009] CR2: ffffffffc09b3a30 CR3: 0000008fe4c0a001 CR4: 00000000007606e0 [ 141.088009] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 141.088009] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 141.088009] PKRU: 55555554 [ 141.088009] Call Trace: [ 141.088009] ? process_one_work+0x195/0x390 [ 141.088009] ? worker_thread+0x30/0x390 [ 141.088009] ? process_one_work+0x390/0x390 [ 141.088009] ? kthread+0x10d/0x130 [ 141.088009] ? kthread_flush_work_fn+0x10/0x10 [ 141.088009] ? ret_from_fork+0x35/0x40] BUG: unable to handle kernel paging request at ffffffffc0b28a5a [ 200.223240] PGD 97fe00d067 P4D 97fe00d067 PUD 97fe00f067 PMD a580cbf067 PTE 0 [ 200.223464] Oops: 0010 [#1] SMP NOPTI [ 200.223579] CPU: 63 PID: 664 Comm: kworker/63:1 Kdump: loaded Not tainted 4.18.0.x86_64 #46 [ 200.224008] Workqueue: events 0xffffffffc0b28a40 [ 200.224008] RIP: 0010:0xffffffffc0b28a5a [ 200.224008] Code: Bad RIP value. [ 200.224008] RSP: 0018:ffffbf3c8e2a3e88 EFLAGS: 00010246 [ 200.224008] RAX: 0000000000000000 RBX: ffffa0799ad6bca0 RCX: 0000000000000000 [ 200.224008] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 [ 200.224008] RBP: 0000000000000000 R08: ffff9fe43fde3cb8 R09: 00000000000000d5 [ 200.224008] R10: ffffbf3c8cb53d90 R11: 00000000000f4240 R12: ffff9fe43fde8700 [ 200.224008] R13: 0000000000000000 R14: ffffa0799ad6bca0 R15: ffffa0799ad6bca8 [ 200.224008] FS: 0000000000000000(0000) GS:ffff9fe43fdc0000(0000) knlGS:0000000000000000 [ 200.224008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 200.224008] CR2: ffffffffc0b28a30 CR3: 00000097fe00a002 CR4: 00000000007606e0 [ 200.224008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 200.224008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 200.224008] PKRU: 55555554 [ 200.224008] Call Trace: [ 200.224008] ? process_one_work+0x195/0x390 [ 200.224008] ? worker_thread+0x30/0x390 [ 200.224008] ? process_one_work+0x390/0x390 [ 200.224008] ? kthread+0x10d/0x130 [ 200.224008] ? kthread_flush_work_fn+0x10/0x10 [ 200.224008] ? ret_from_fork+0x35/0x40 [ 200.224008] kernel fault(0x1) notification starting on CPU 63 [ 200.224008] kernel fault(0x1) notification finished on CPU 63 [ 200.224008] CR2: ffffffffc0b28a5a [ 200.224008] ---[ end trace c82a412d93f57412 ]--- The reason is as follows: T1: rmmod ipmi_si. ->ipmi_unregister_smi() -> ipmi_bmc_unregister() -> __ipmi_bmc_unregister() -> kref_put(&bmc->usecount, cleanup_bmc_device); -> schedule_work(&bmc->remove_work); T2: rmmod ipmi_msghandler. ipmi_msghander module uninstalled, and the module space will be freed. T3: bmc->remove_work doing cleanup the bmc resource. -> cleanup_bmc_work() -> platform_device_unregister(&bmc->pdev); -> platform_device_del(pdev); -> device_del(&pdev->dev); -> kobject_uevent(&dev->kobj, KOBJ_REMOVE); -> kobject_uevent_env() -> dev_uevent() -> if (dev->type && dev->type->name) 'dev->type'(bmc_device_type) pointer space has freed when uninstall ipmi_msghander module, 'dev->type->name' cause the system crash. drivers/char/ipmi/ipmi_msghandler.c: 2820 static const struct device_type bmc_device_type = { 2821 .groups = bmc_dev_attr_groups, 2822 }; Steps to reproduce: Add a time delay in cleanup_bmc_work() function, and uninstall ipmi_si and ipmi_msghandler module. 2910 static void cleanup_bmc_work(struct work_struct *work) 2911 { 2912 struct bmc_device *bmc = container_of(work, struct bmc_device, 2913 remove_work); 2914 int id = bmc->pdev.id; /* Unregister overwrites id */ 2915 2916 msleep(3000); <--- 2917 platform_device_unregister(&bmc->pdev); 2918 ida_simple_remove(&ipmi_bmc_ida, id); 2919 } Use 'remove_work_wq' instead of 'system_wq' to solve this issues. Fixes: b2cfd8ab ("ipmi: Rework device id and guid handling to catch changing BMCs") Signed-off-by:
Wu Bo <wubo40@huawei.com> Message-Id: <1640070034-56671-1-git-send-email-wubo40@huawei.com> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Willem de Bruijn authored
[ Upstream commit 1ed1d592 ] virtio_net_hdr_set_proto infers skb->protocol from the virtio_net_hdr gso_type, to avoid packets getting dropped for lack of a proto type. Its protocol choice is a guess, especially in the case of UFO, where the single VIRTIO_NET_HDR_GSO_UDP label covers both UFOv4 and UFOv6. Skip this best effort if the field is already initialized. Whether explicitly from userspace, or implicitly based on an earlier call to dev_parse_header_protocol (which is more robust, but was introduced after this patch). Fixes: 9d2f67e4 ("net/packet: fix packet drop as of virtio gso") Signed-off-by:
Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20211220145027.2784293-1-willemdebruijn.kernel@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Willem de Bruijn authored
[ Upstream commit 7e5cced9 ] Skb with skb->protocol 0 at the time of virtio_net_hdr_to_skb may have a protocol inferred from virtio_net_hdr with virtio_net_hdr_set_proto. Unlike TCP, UDP does not have separate types for IPv4 and IPv6. Type VIRTIO_NET_HDR_GSO_UDP is guessed to be IPv4/UDP. As of the below commit, UFOv6 packets are dropped due to not matching the protocol as obtained from dev_parse_header_protocol. Invert the test to take that L2 protocol field as starting point and pass both UFOv4 and UFOv6 for VIRTIO_NET_HDR_GSO_UDP. Fixes: 924a9bc3 ("net: check if protocol extracted by virtio_net_hdr_set_proto is correct") Link: https://lore.kernel.org/netdev/CABcq3pG9GRCYqFDBAJ48H1vpnnX=41u+MhQnayF1ztLH4WX0Fw@mail.gmail.com/ Reported-by:
Andrew Melnichenko <andrew@daynix.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20211220144901.2784030-1-willemdebruijn.kernel@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
蒋家盛 authored
[ Upstream commit 60ec7fcf ] The return value of kcalloc() needs to be checked. To avoid dereference of null pointer in case of the failure of alloc. Therefore, it might be better to change the return type of qlcnic_sriov_alloc_vlans() and return -ENOMEM when alloc fails and return 0 the others. Also, qlcnic_sriov_set_guest_vlan_mode() and __qlcnic_pci_sriov_enable() should deal with the return value of qlcnic_sriov_alloc_vlans(). Fixes: 154d0c81 ("qlcnic: VLAN enhancement for 84XX adapters") Signed-off-by:
Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ignacy Gawędzki authored
[ Upstream commit ebb966d3 ] In commit 5648b5e1 ("netfilter: nfnetlink_queue: fix OOB when mac header was cleared"), the test for non-empty MAC header introduced in commit 2c38de4c ("netfilter: fix looped (broad|multi)cast's MAC handling") has been replaced with a test for a set MAC header. This breaks the case when the MAC header has been reset (using skb_reset_mac_header), as is the case with looped-back multicast packets. As a result, the packets ending up in NFQUEUE get a bogus hwaddr interpreted from the first bytes of the IP header. This patch adds a test for a non-empty MAC header in addition to the test for a set MAC header. The same two tests are also implemented in nfnetlink_log.c, where the initial code of commit 2c38de4c ("netfilter: fix looped (broad|multi)cast's MAC handling") has not been touched, but where supposedly the same situation may happen. Fixes: 5648b5e1 ("netfilter: nfnetlink_queue: fix OOB when mac header was cleared") Signed-off-by:
Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr> Reviewed-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
José Expósito authored
[ Upstream commit bee90911 ] The wrong goto label was used for the error case and missed cleanup of the pkt allocation. Fixes: d39bf40e ("IB/qib: Protect from buffer overflow in struct qib_user_sdma_pkt fields") Link: https://lore.kernel.org/r/20211208175238.29983-1-jose.exposito89@gmail.com Addresses-Coverity-ID: 1493352 ("Resource leak") Signed-off-by:
José Expósito <jose.exposito89@gmail.com> Acked-by:
Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Dongliang Mu authored
[ Upstream commit db6689b6 ] The corresponding API for clk_prepare is clk_unprepare, other than clk_disable_unprepare. Fix this by changing clk_disable_unprepare to clk_unprepare. Fixes: 5762ab71 ("spi: Add support for Armada 3700 SPI Controller") Signed-off-by:
Dongliang Mu <mudongliangabcd@gmail.com> Link: https://lore.kernel.org/r/20211206101931.2816597-1-mudongliangabcd@gmail.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Robert Marko authored
[ Upstream commit 08d2061f ] Orange Pi Zero Plus uses a Realtek RTL8211E RGMII Gigabit PHY, but its currently set to plain RGMII mode meaning that it doesn't introduce delays. With this setup, TX packets are completely lost and changing the mode to RGMII-ID so the PHY will add delays internally fixes the issue. Fixes: a7affb13 ("arm64: allwinner: H5: Add Xunlong Orange Pi Zero Plus") Acked-by:
Chen-Yu Tsai <wens@csie.org> Tested-by:
Ron Goossens <rgoossens@gmail.com> Tested-by:
Samuel Holland <samuel@sholland.org> Signed-off-by:
Robert Marko <robert.marko@sartura.hr> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211117140222.43692-1-robert.marko@sartura.hr Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Benjamin Tissoires authored
commit 93a2207c upstream. An overlook from the previous commit: we don't even parse or start the device, meaning that the device is not presented to user space. Fixes: 93020953 ("HID: check for valid USB device for many HID drivers") Cc: stable@vger.kernel.org Link: https://bugs.archlinux.org/task/73048 Link: https://bugzilla.kernel.org/show_bug.cgi?id=215341 Link: https://lore.kernel.org/r/e4efbf13-bd8d-0370-629b-6c80c0044b15@leemhuis.info/ Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paolo Valente authored
commit eed47d19 upstream. The function bfq_bfqq_expire() invokes the function __bfq_bfqq_expire(), and the latter may free the in-service bfq-queue. If this happens, then no other instruction of bfq_bfqq_expire() must be executed, or a use-after-free will occur. Basing on the assumption that __bfq_bfqq_expire() invokes bfq_put_queue() on the in-service bfq-queue exactly once, the queue is assumed to be freed if its refcounter is equal to one right before invoking __bfq_bfqq_expire(). But, since commit 9dee8b3b ("block, bfq: fix queue removal from weights tree") this assumption is false. __bfq_bfqq_expire() may also invoke bfq_weights_tree_remove() and, since commit 9dee8b3b ("block, bfq: fix queue removal from weights tree"), also the latter function may invoke bfq_put_queue(). So __bfq_bfqq_expire() may invoke bfq_put_queue() twice, and this is the actual case where the in-service queue may happen to be freed. To address this issue, this commit moves the check on the refcounter of the queue right around the last bfq_put_queue() that may be invoked on the queue. Fixes: 9dee8b3b ("block, bfq: fix queue removal from weights tree") Reported-by:
Dmitrii Tcvetkov <demfloro@demfloro.ru> Reported-by:
Douglas Anderson <dianders@chromium.org> Tested-by:
Dmitrii Tcvetkov <demfloro@demfloro.ru> Tested-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Paolo Valente <paolo.valente@linaro.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paolo Valente authored
commit 9dee8b3b upstream. bfq maintains an ordered list, through a red-black tree, of unique weights of active bfq_queues. This list is used to detect whether there are active queues with differentiated weights. The weight of a queue is removed from the list when both the following two conditions become true: (1) the bfq_queue is flagged as inactive (2) the has no in-flight request any longer; Unfortunately, in the rare cases where condition (2) becomes true before condition (1), the removal fails, because the function to remove the weight of the queue (bfq_weights_tree_remove) is rightly invoked in the path that deactivates the bfq_queue, but mistakenly invoked *before* the function that actually performs the deactivation (bfq_deactivate_bfqq). This commits moves the invocation of bfq_weights_tree_remove for condition (1) to after bfq_deactivate_bfqq. As a consequence of this move, it is necessary to add a further reference to the queue when the weight of a queue is added, because the queue might otherwise be freed before bfq_weights_tree_remove is invoked. This commit adds this reference and makes all related modifications. Signed-off-by:
Paolo Valente <paolo.valente@linaro.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paolo Valente authored
commit ba7aeae5 upstream. Since commit '2d29c9f8 ("block, bfq: improve asymmetric scenarios detection")', if there are process groups with I/O requests waiting for completion, then BFQ tags the scenario as 'asymmetric'. This detection is needed for preserving service guarantees (for details, see comments on the computation * of the variable asymmetric_scenario in the function bfq_better_to_idle). Unfortunately, commit '2d29c9f8 ("block, bfq: improve asymmetric scenarios detection")' contains an error exactly in the updating of the number of groups with I/O requests waiting for completion: if a group has more than one descendant process, then the above number of groups, which is renamed from num_active_groups to a more appropriate num_groups_with_pending_reqs by this commit, may happen to be wrongly decremented multiple times, namely every time one of the descendant processes gets all its pending I/O requests completed. A correct, complete solution should work as follows. Consider a group that is inactive, i.e., that has no descendant process with pending I/O inside BFQ queues. Then suppose that num_groups_with_pending_reqs is still accounting for this group, because the group still has some descendant process with some I/O request still in flight. num_groups_with_pending_reqs should be decremented when the in-flight request of the last descendant process is finally completed (assuming that nothing else has changed for the group in the meantime, in terms of composition of the group and active/inactive state of child groups and processes). To accomplish this, an additional pending-request counter must be added to entities, and must be updated correctly. To avoid this additional field and operations, this commit resorts to the following tradeoff between simplicity and accuracy: for an inactive group that is still counted in num_groups_with_pending_reqs, this commit decrements num_groups_with_pending_reqs when the first descendant process of the group remains with no request waiting for completion. This simplified scheme provides a fix to the unbalanced decrements introduced by 2d29c9f8. Since this error was also caused by lack of comments on this non-trivial issue, this commit also adds related comments. Fixes: 2d29c9f8 ("block, bfq: improve asymmetric scenarios detection") Reported-by:
Steven Barrett <steven@liquorix.net> Tested-by:
Steven Barrett <steven@liquorix.net> Tested-by:
Lucjan Lucjanov <lucjan.lucjanov@gmail.com> Reviewed-by:
Federico Motta <federico@willer.it> Signed-off-by:
Paolo Valente <paolo.valente@linaro.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Federico Motta authored
commit 98fa7a3e upstream. Since commit 2d29c9f8 ("block, bfq: improve asymmetric scenarios detection"), a scenario is defined asymmetric when one of the following conditions holds: - active bfq_queues have different weights - one or more group of entities (bfq_queue or other groups of entities) are active bfq grants fairness and low latency also in such asymmetric scenarios, by plugging the dispatching of I/O if the bfq_queue in service happens to be temporarily idle. This plugging may lower throughput, so it is important to do it only when strictly needed. By mistake, in commit '2d29c9f8' ("block, bfq: improve asymmetric scenarios detection") the num_active_groups counter was firstly incremented and subsequently decremented at any entity (group or bfq_queue) weight change. This is useless, because only transitions from active to inactive and vice versa matter for that counter. Unfortunately this is also incorrect in the following case: the entity at issue is a bfq_queue and it is under weight raising. In fact in this case there is a spurious increment of the num_active_groups counter. This spurious increment may cause scenarios to be wrongly detected as asymmetric, thus causing useless plugging and loss of throughput. This commit fixes this issue by simply removing the above useless and wrong increments and decrements. Fixes: 2d29c9f8 ("block, bfq: improve asymmetric scenarios detection") Tested-by:
Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by:
Federico Motta <federico@willer.it> Signed-off-by:
Paolo Valente <paolo.valente@linaro.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Federico Motta authored
commit 2d29c9f8 upstream. bfq defines as asymmetric a scenario where an active entity, say E (representing either a single bfq_queue or a group of other entities), has a higher weight than some other entities. If the entity E does sync I/O in such a scenario, then bfq plugs the dispatch of the I/O of the other entities in the following situation: E is in service but temporarily has no pending I/O request. In fact, without this plugging, all the times that E stops being temporarily idle, it may find the internal queues of the storage device already filled with an out-of-control number of extra requests, from other entities. So E may have to wait for the service of these extra requests, before finally having its own requests served. This may easily break service guarantees, with E getting less than its fair share of the device throughput. Usually, the end result is that E gets the same fraction of the throughput as the other entities, instead of getting more, according to its higher weight. Yet there are two other more subtle cases where E, even if its weight is actually equal to or even lower than the weight of any other active entities, may get less than its fair share of the throughput in case the above I/O plugging is not performed: 1. other entities issue larger requests than E; 2. other entities contain more active child entities than E (or in general tend to have more backlog than E). In the first case, other entities may get more service than E because they get larger requests, than those of E, served during the temporary idle periods of E. In the second case, other entities get more service because, by having many child entities, they have many requests ready for dispatching while E is temporarily idle. This commit addresses this issue by extending the definition of asymmetric scenario: a scenario is asymmetric when - active entities representing bfq_queues have differentiated weights, as in the original definition or (inclusive) - one or more entities representing groups of entities are active. This broader definition makes sure that I/O plugging will be performed in all the above cases, provided that there is at least one active group. Of course, this definition is very coarse, so it will trigger I/O plugging also in cases where it is not needed, such as, e.g., multiple active entities with just one child each, and all with the same I/O-request size. The reason for this coarse definition is just that a finer-grained definition would be rather heavy to compute. On the opposite end, even this new definition does not trigger I/O plugging in all cases where there is no active group, and all bfq_queues have the same weight. So, in these cases some unfairness may occur if there are asymmetries in I/O-request sizes. We made this choice because I/O plugging may lower throughput, and probably a user that has not created any group cares more about throughput than about perfect fairness. At any rate, as for possible applications that may care about service guarantees, bfq already guarantees a high responsiveness and a low latency to soft real-time applications automatically. Signed-off-by:
Federico Motta <federico@willer.it> Signed-off-by:
Paolo Valente <paolo.valente@linaro.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-