- Apr 08, 2020
-
-
Neal Cardwell authored
commit dad8cea7 upstream. In a rare corner case the new logic for undo of SYNACK RTO could result in triggering the warning in tcp_fastretrans_alert() that says: WARN_ON(tp->retrans_out != 0); The warning looked like: WARNING: CPU: 1 PID: 1 at net/ipv4/tcp_input.c:2818 tcp_ack+0x13e0/0x3270 The sequence that tickles this bug is: - Fast Open server receives TFO SYN with data, sends SYNACK - (client receives SYNACK and sends ACK, but ACK is lost) - server app sends some data packets - (N of the first data packets are lost) - server receives client ACK that has a TS ECR matching first SYNACK, and also SACKs suggesting the first N data packets were lost - server performs TS undo of SYNACK RTO, then immediately enters recovery - buggy behavior then performed a *second* undo that caused the connection to be in CA_Open with retrans_out != 0 Basically, the incoming ACK packet with SACK blocks causes us to first undo the cwnd reduction from the SYNACK RTO, but then immediately enters fast recovery, which then makes us eligible for undo again. And then tcp_rcv_synrecv_state_fastopen() accidentally performs an undo using a "mash-up" of state from two different loss recovery phases: it uses the timestamp info from the ACK of the original SYNACK, and the undo_marker from the fast recovery. This fix refines the logic to only invoke the tcp_try_undo_loss() inside tcp_rcv_synrecv_state_fastopen() if the connection is still in CA_Loss. If peer SACKs triggered fast recovery, then tcp_rcv_synrecv_state_fastopen() can't safely undo. Fixes: 794200d6 ("tcp: undo cwnd on Fast Open spurious SYNACK retransmit") Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mike Marciniszyn authored
commit 9a293d1e upstream. The following warning can occur when a pq is left on the dmawait list and the pq is then freed: WARNING: CPU: 47 PID: 3546 at lib/list_debug.c:29 __list_add+0x65/0xc0 list_add corruption. next->prev should be prev (ffff939228da1880), but was ffff939cabb52230. (next=ffff939cabb52230). Modules linked in: mmfs26(OE) mmfslinux(OE) tracedev(OE) 8021q garp mrp ib_isert iscsi_target_mod target_core_mod crc_t10dif crct10dif_generic opa_vnic rpcrdma ib_iser libiscsi scsi_transport_iscsi ib_ipoib(OE) bridge stp llc iTCO_wdt iTCO_vendor_support intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crct10dif_pclmul crct10dif_common crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd ast ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm pcspkr joydev drm_panel_orientation_quirks i2c_i801 mei_me lpc_ich mei wmi ipmi_si ipmi_devintf ipmi_msghandler nfit libnvdimm acpi_power_meter acpi_pad hfi1(OE) rdmavt(OE) rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_core binfmt_misc numatools(OE) xpmem(OE) ip_tables nfsv3 nfs_acl nfs lockd grace sunrpc fscache igb ahci libahci i2c_algo_bit dca libata ptp pps_core crc32c_intel [last unloaded: i2c_algo_bit] CPU: 47 PID: 3546 Comm: wrf.exe Kdump: loaded Tainted: G W OE ------------ 3.10.0-957.41.1.el7.x86_64 #1 Hardware name: HPE.COM HPE SGI 8600-XA730i Gen10/X11DPT-SB-SG007, BIOS SBED1229 01/22/2019 Call Trace: [<ffffffff91f65ac0>] dump_stack+0x19/0x1b [<ffffffff91898b78>] __warn+0xd8/0x100 [<ffffffff91898bff>] warn_slowpath_fmt+0x5f/0x80 [<ffffffff91a1dabe>] ? ___slab_alloc+0x24e/0x4f0 [<ffffffff91b97025>] __list_add+0x65/0xc0 [<ffffffffc03926a5>] defer_packet_queue+0x145/0x1a0 [hfi1] [<ffffffffc0372987>] sdma_check_progress+0x67/0xa0 [hfi1] [<ffffffffc03779d2>] sdma_send_txlist+0x432/0x550 [hfi1] [<ffffffff91a20009>] ? kmem_cache_alloc+0x179/0x1f0 [<ffffffffc0392973>] ? user_sdma_send_pkts+0xc3/0x1990 [hfi1] [<ffffffffc0393e3a>] user_sdma_send_pkts+0x158a/0x1990 [hfi1] [<ffffffff918ab65e>] ? try_to_del_timer_sync+0x5e/0x90 [<ffffffff91a3fe1a>] ? __check_object_size+0x1ca/0x250 [<ffffffffc0395546>] hfi1_user_sdma_process_request+0xd66/0x1280 [hfi1] [<ffffffffc034e0da>] hfi1_aio_write+0xca/0x120 [hfi1] [<ffffffff91a4245b>] do_sync_readv_writev+0x7b/0xd0 [<ffffffff91a4409e>] do_readv_writev+0xce/0x260 [<ffffffff918df69f>] ? pick_next_task_fair+0x5f/0x1b0 [<ffffffff918db535>] ? sched_clock_cpu+0x85/0xc0 [<ffffffff91f6b16a>] ? __schedule+0x13a/0x860 [<ffffffff91a442c5>] vfs_writev+0x35/0x60 [<ffffffff91a4447f>] SyS_writev+0x7f/0x110 [<ffffffff91f78ddb>] system_call_fastpath+0x22/0x27 The issue happens when wait_event_interruptible_timeout() returns a value <= 0. In that case, the pq is left on the list. The code continues sending packets and potentially can complete the current request with the pq still on the dmawait list provided no descriptor shortage is seen. If the pq is torn down in that state, the sdma interrupt handler could find the now freed pq on the list with list corruption or memory corruption resulting. Fix by adding a flush routine to ensure that the pq is never on a list after processing a request. A follow-up patch series will address issues with seqlock surfaced in: https://lore.kernel.org/r/20200320003129.GP20941@ziepe.ca The seqlock use for sdma will then be converted to a spin lock since the list_empty() doesn't need the protection afforded by the sequence lock currently in use. Fixes: a0d40693 ("staging/rdma/hfi1: Add page lock limit check for SDMA requests") Link: https://lore.kernel.org/r/20200320200200.23203.37777.stgit@awfm-01.aw.intel.com Reviewed-by:
Kaike Wan <kaike.wan@intel.com> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Howells authored
commit 498b5776 upstream. Fix the handling of sendmsg() with MSG_WAITALL for userspace to round the timeout for when a signal occurs up to at least two jiffies as a 1 jiffy timeout may end up being effectively 0 if jiffies wraps at the wrong time. Fixes: bc5e3a54 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals") Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Luca Coelho authored
commit 699b760b upstream. If the firmware is in a bad state or not initialized fully, sending the DBGC_SUSPEND_RESUME command fails but we can still collect logs. Instead of aborting the entire dump process, simply ignore the error. By removing the last callpoint that was checking the return value, we can also convert the function to return void. Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Fixes: 57605833 ("iwlwifi: dbg: support debug recording suspend resume command") Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200306151129.dcec37b2efd4.I8dcd190431d110a6a0e88095ce93591ccfb3d78d@changeid Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mordechay Goodstein authored
commit a5688e60 upstream. The TLV offset is only used to read registers, while the offset used for the FIFO addresses are hard coded in the driver and not given by the TLV. If we try to apply the TLV offset when reading the FIFOs, we'll read from invalid addresses, causing the driver to hang. Signed-off-by:
Mordechay Goodstein <mordechay.goodstein@intel.com> Fixes: 8d7dea25 ("iwlwifi: dbg_ini: implement Rx fifos dump") Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200306151129.fbab869c26fa.I4ddac20d02f9bce41855a816aa6855c89bc3874e@changeid Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mordechay Goodstein authored
commit cb377dfd upstream. The AP may set the LDPC capability only in HE (IEEE80211_HE_PHY_CAP1), but we were checking it only in the HT capabilities. If we don't use this capability when required, the DSP gets the wrong configuration in HE and doesn't work properly. Signed-off-by:
Mordechay Goodstein <mordechay.goodstein@intel.com> Fixes: befebbb3 ("iwlwifi: rs: consider LDPC capability in case of HE") Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200306151128.492d167c1a25.I1ad1353dbbf6c99ae57814be750f41a1c9f7f4ac@changeid Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tariq Toukan authored
commit f28ca65e upstream. Fix to match the HW spec: TRACKING state is 1, SEARCHING is 2. No real issue for now, as these values are not currently used. Fixes: d2ead1f3 ("net/mlx5e: Add kTLS TX HW offload support") Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Reviewed-by:
Boris Pismenny <borisp@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bibby Hsieh authored
commit ce35e21d upstream. Mediatek CMDQ driver have a mechanism to do TXDONE_BY_ACK, so we should set knows_txdone. Fixes:576f1b4b ("soc: mediatek: Add Mediatek CMDQ helper") Cc: stable@vger.kernel.org # v5.0+ Signed-off-by:
Bibby Hsieh <bibby.hsieh@mediatek.com> Reviewed-by:
CK Hu <ck.hu@mediatek.com> Signed-off-by:
Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Geoffrey Allott authored
commit e9097e47 upstream. I have a system which has an EVGA X99 Classified motherboard. The pin assignments for the HD Audio controller are not correct under Linux. Windows 10 works fine and informs me that it's using the Recon3Di driver, and on Linux, `cat /sys/class/sound/card0/device/subsystem_{vendor,device}` yields 0x3842 0x1038 This patch adds a corresponding entry to the quirk list. Signed-off-by:
Geoffrey Allott <geoffrey@allott.email> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/a6cd56b678c00ce2db3685e4278919f2584f8244.camel@allott.email Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mike Snitzer authored
commit 120c9257 upstream. This reverts commit effd58c9. blk_queue_split() is causing excessive IO splitting -- because blk_max_size_offset() depends on 'chunk_sectors' limit being set and if it isn't (as is the case for DM targets!) it falls back to splitting on a 'max_sectors' boundary regardless of offset. "Fix" this by reverting back to _not_ using blk_queue_split() in dm_process_bio() for normal IO (reads and writes). Long-term fix is still TBD but it should focus on training blk_max_size_offset() to call into a DM provided hook (to call DM's max_io_len()). Test results from simple misaligned IO test on 4-way dm-striped device with chunksize of 128K and stripesize of 512K: xfs_io -d -c 'pread -b 2m 224s 4072s' /dev/mapper/stripe_dev before this revert: 253,0 21 1 0.000000000 2206 Q R 224 + 4072 [xfs_io] 253,0 21 2 0.000008267 2206 X R 224 / 480 [xfs_io] 253,0 21 3 0.000010530 2206 X R 224 / 256 [xfs_io] 253,0 21 4 0.000027022 2206 X R 480 / 736 [xfs_io] 253,0 21 5 0.000028751 2206 X R 480 / 512 [xfs_io] 253,0 21 6 0.000033323 2206 X R 736 / 992 [xfs_io] 253,0 21 7 0.000035130 2206 X R 736 / 768 [xfs_io] 253,0 21 8 0.000039146 2206 X R 992 / 1248 [xfs_io] 253,0 21 9 0.000040734 2206 X R 992 / 1024 [xfs_io] 253,0 21 10 0.000044694 2206 X R 1248 / 1504 [xfs_io] 253,0 21 11 0.000046422 2206 X R 1248 / 1280 [xfs_io] 253,0 21 12 0.000050376 2206 X R 1504 / 1760 [xfs_io] 253,0 21 13 0.000051974 2206 X R 1504 / 1536 [xfs_io] 253,0 21 14 0.000055881 2206 X R 1760 / 2016 [xfs_io] 253,0 21 15 0.000057462 2206 X R 1760 / 1792 [xfs_io] 253,0 21 16 0.000060999 2206 X R 2016 / 2272 [xfs_io] 253,0 21 17 0.000062489 2206 X R 2016 / 2048 [xfs_io] 253,0 21 18 0.000066133 2206 X R 2272 / 2528 [xfs_io] 253,0 21 19 0.000067507 2206 X R 2272 / 2304 [xfs_io] 253,0 21 20 0.000071136 2206 X R 2528 / 2784 [xfs_io] 253,0 21 21 0.000072764 2206 X R 2528 / 2560 [xfs_io] 253,0 21 22 0.000076185 2206 X R 2784 / 3040 [xfs_io] 253,0 21 23 0.000077486 2206 X R 2784 / 2816 [xfs_io] 253,0 21 24 0.000080885 2206 X R 3040 / 3296 [xfs_io] 253,0 21 25 0.000082316 2206 X R 3040 / 3072 [xfs_io] 253,0 21 26 0.000085788 2206 X R 3296 / 3552 [xfs_io] 253,0 21 27 0.000087096 2206 X R 3296 / 3328 [xfs_io] 253,0 21 28 0.000093469 2206 X R 3552 / 3808 [xfs_io] 253,0 21 29 0.000095186 2206 X R 3552 / 3584 [xfs_io] 253,0 21 30 0.000099228 2206 X R 3808 / 4064 [xfs_io] 253,0 21 31 0.000101062 2206 X R 3808 / 3840 [xfs_io] 253,0 21 32 0.000104956 2206 X R 4064 / 4096 [xfs_io] 253,0 21 33 0.001138823 0 C R 4096 + 200 [0] after this revert: 253,0 18 1 0.000000000 4430 Q R 224 + 3896 [xfs_io] 253,0 18 2 0.000018359 4430 X R 224 / 256 [xfs_io] 253,0 18 3 0.000028898 4430 X R 256 / 512 [xfs_io] 253,0 18 4 0.000033535 4430 X R 512 / 768 [xfs_io] 253,0 18 5 0.000065684 4430 X R 768 / 1024 [xfs_io] 253,0 18 6 0.000091695 4430 X R 1024 / 1280 [xfs_io] 253,0 18 7 0.000098494 4430 X R 1280 / 1536 [xfs_io] 253,0 18 8 0.000114069 4430 X R 1536 / 1792 [xfs_io] 253,0 18 9 0.000129483 4430 X R 1792 / 2048 [xfs_io] 253,0 18 10 0.000136759 4430 X R 2048 / 2304 [xfs_io] 253,0 18 11 0.000152412 4430 X R 2304 / 2560 [xfs_io] 253,0 18 12 0.000160758 4430 X R 2560 / 2816 [xfs_io] 253,0 18 13 0.000183385 4430 X R 2816 / 3072 [xfs_io] 253,0 18 14 0.000190797 4430 X R 3072 / 3328 [xfs_io] 253,0 18 15 0.000197667 4430 X R 3328 / 3584 [xfs_io] 253,0 18 16 0.000218751 4430 X R 3584 / 3840 [xfs_io] 253,0 18 17 0.000226005 4430 X R 3840 / 4096 [xfs_io] 253,0 18 18 0.000250404 4430 Q R 4120 + 176 [xfs_io] 253,0 18 19 0.000847708 0 C R 4096 + 24 [0] 253,0 18 20 0.000855783 0 C R 4120 + 176 [0] Fixes: effd58c9 ("dm: always call blk_queue_split() in dm_process_bio()") Cc: stable@vger.kernel.org Reported-by:
Andreas Gruenbacher <agruenba@redhat.com> Tested-by:
Barry Marson <bmarson@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hans de Goede authored
commit 9c80662a upstream. Some HP Pavilion x2 10 models use an AXP288 for charging and fuel-gauge. We use a native power_supply / PMIC driver in this case, because on most models with an AXP288 the ACPI AC / Battery code is either completely missing or relies on custom / proprietary ACPI OpRegions which Linux does not implement. The native drivers mostly work fine, but there are 2 problems: 1. These model uses a Type-C connector for charging which the AXP288 does not support. As long as a Type-A charger (which uses the USB data pins for charger type detection) is used everything is fine. But if a Type-C charger is used (such as the charger shipped with the device) then the charger is not recognized. So we end up slowly discharging the device even though a charger is connected, because we are limiting the current from the charger to 500mA. To make things worse this happens with the device's official charger. Looking at the ACPI tables HP has "solved" the problem of the AXP288 not being able to recognize Type-C chargers by simply always programming the input-current-limit at 3000mA and relying on a Vhold setting of 4.7V (normally 4.4V) to limit the current intake if the charger cannot handle this. 2. If no charger is connected when the machine boots then it boots with the vbus-path disabled. On other devices this is done when a 5V boost converter is active to avoid the PMIC trying to charge from the 5V boost output. This is done when an OTG host cable is inserted and the ID pin on the micro-B receptacle is pulled low, the ID pin has an ACPI event handler associated with it which re-enables the vbus-path when the ID pin is pulled high when the OTG cable is removed. The Type-C connector has no ID pin, there is no ID pin handler and there appears to be no 5V boost converter, so we end up not charging because the vbus-path is disabled, until we unplug the charger which automatically clears the vbus-path disable bit and then on the second plug-in of the adapter we start charging. The HP Pavilion x2 10 models with an AXP288 do have mostly working ACPI AC / Battery code which does not rely on custom / proprietary ACPI OpRegions. So one possible solution would be to blacklist the AXP288 native power_supply drivers and add the HP Pavilion x2 10 with AXP288 DMI ids to the list of devices which should use the ACPI AC / Battery code even though they have an AXP288 PMIC. This would require changes to 4 files: drivers/acpi/ac.c, drivers/power/supply/axp288_charger.c, drivers/acpi/battery.c and drivers/power/supply/axp288_fuel_gauge.c. Beside needing adding the same DMI matches to 4 different files, this approach also triggers problem 2. from above, but then when suspended, during suspend the machine will not wakeup because the vbus path is disabled by the AML code when not charging, so the Vbus low-to-high IRQ is not triggered, the CPU never wakes up and the device does not charge even though the user likely things it is charging, esp. since the charge status LED is directly coupled to an adapter being plugged in and does not reflect actual charging. This could be worked by enabling vbus-path explicitly from say the axp288_charger driver's suspend handler. So neither situation is ideal, in both cased we need to explicitly enable the vbus-path to work around different variants of problem 2 above, this requires a quirk in the axp288_charger code. If we go the route of using the ACPI AC / Battery drivers then we need modifications to 3 other drivers; and we need to partially disable the axp288_charger code, while at the same time keeping it around to enable vbus-path on suspend. OTOH we can copy the hardcoding of 3A input-current-limit (we never touch Vhold, so that would stay at 4.7V) to the axp288_charger code, which needs changes regardless, then we concentrate all special handling of this interesting device model in the axp288_charger code. That is what this commit does. Cc: stable@vger.kernel.org BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1791098 Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hans de Goede authored
commit 9c945530 upstream. On devices with an AXP288, we need to wakeup from suspend when a charger is plugged in, so that we can do charger-type detection and so that the axp288-charger driver, which listens for our extcon events, can configure the input-current-limit accordingly. Cc: stable@vger.kernel.org Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nicholas Johnson authored
commit 3c91ef69 upstream. Return -EPERM if reg_read is NULL in bin_attr_nvmem_read() or if reg_write is NULL in bin_attr_nvmem_write(). This prevents NULL dereferences such as the one described in 03cd45d2 ("thunderbolt: Prevent crash if non-active NVMem file is read") Signed-off-by:
Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200310132257.23358-10-srinivas.kandagatla@linaro.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Usyskin authored
commit 99397d33 upstream. Add Cedar Fork (CDF) device ids, those belongs to the cannon point family. Cc: <stable@vger.kernel.org> Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20200324210730.17672-1-tomas.winkler@intel.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eugene Syromiatnikov authored
commit 9b6eaaf3 upstream. The BIT() macro definition is not available for the UAPI headers (moreover, it can be defined differently in the user space); replace its usage with the _BITUL() macro that is defined in <linux/const.h>. Fixes: 237483aa ("coresight: stm: adding driver for CoreSight STM component") Signed-off-by:
Eugene Syromiatnikov <esyr@redhat.com> Cc: stable <stable@vger.kernel.org> Reviewed-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200324042213.GA10452@asgard.redhat.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kelsey Skunberg authored
commit bd641fd8 upstream. We changed these sysfs filenames: .../pci_bus/<domain:bus>/rescan -> .../pci_bus/<domain:bus>/bus_rescan .../<domain:bus:dev.fn>/rescan -> .../<domain:bus:dev.fn>/dev_rescan and Ruslan reported [1] that this broke a userspace application. Revert these name changes so both files are named "rescan" again. Note that we have to use __ATTR() to assign custom C symbols, i.e., "struct device_attribute <symbol>". [1] https://lore.kernel.org/r/CAB=otbSYozS-ZfxB0nCiNnxcbqxwrHOSYxJJtDKa63KzXbXgpw@mail.gmail.com [bhelgaas: commit log, use __ATTR() both places so we don't have to rename the attributes] Fixes: 8bdfa145 ("PCI: sysfs: Define device attributes with DEVICE_ATTR*()") Fixes: 4e2b7943 ("PCI: sysfs: Change DEVICE_ATTR() to DEVICE_ATTR_WO()") Link: https://lore.kernel.org/r/20200325151708.32612-1-skunberg.kelsey@gmail.com Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@gmail.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org # v5.4+ Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kishon Vijay Abraham I authored
commit b2ba9225 upstream. commit e0332712 ("pci_endpoint_test: Add 2 ioctl commands") uses module parameter 'irqtype' in pci_endpoint_test_set_irq() to check if IRQ vectors of a particular type (MSI or MSI-X or LEGACY) is already allocated. However with multi-function devices, 'irqtype' will not correctly reflect the IRQ type of the PCI device. Fix it here by adding 'irqtype' for each PCI device to show the IRQ type of a particular PCI device. Fixes: e0332712 ("pci_endpoint_test: Add 2 ioctl commands") Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org # v4.19+ Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kishon Vijay Abraham I authored
commit 6b443e5c upstream. Adding more than 10 pci-endpoint-test devices results in "kobject_add_internal failed for pci-endpoint-test.1 with -EEXIST, don't try to register things with the same name in the same directory". This is because commit 2c156ac7 ("misc: Add host side PCI driver for PCI test function device") limited the length of the "name" to 20 characters. Change the length of the name to 24 in order to support upto 10000 pci-endpoint-test devices. Fixes: 2c156ac7 ("misc: Add host side PCI driver for PCI test function device") Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org # v4.14+ Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
YueHaibing authored
commit 10cea23b upstream. rts522a should use rts522a_pcr_ops, which is diffrent with rts5227 in phy/hw init setting. Fixes: ce6a5acc ("mfd: rtsx: Add support for rts522A") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200326032618.20472-1-yuehaibing@huawei.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Guenter Roeck authored
[ Upstream commit 863844ee ] With commit 216b4400 ("brcmfmac: Fix use after free in brcmf_sdio_readframes()") applied, we see locking timeouts in brcmf_sdio_watchdog_thread(). brcmfmac: brcmf_escan_timeout: timer expired INFO: task brcmf_wdog/mmc1:621 blocked for more than 120 seconds. Not tainted 4.19.94-07984-g24ff99a0f713 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. brcmf_wdog/mmc1 D 0 621 2 0x00000000 last_sleep: 2440793077. last_runnable: 2440766827 [<c0aa1e60>] (__schedule) from [<c0aa2100>] (schedule+0x98/0xc4) [<c0aa2100>] (schedule) from [<c0853830>] (__mmc_claim_host+0x154/0x274) [<c0853830>] (__mmc_claim_host) from [<bf10c5b8>] (brcmf_sdio_watchdog_thread+0x1b0/0x1f8 [brcmfmac]) [<bf10c5b8>] (brcmf_sdio_watchdog_thread [brcmfmac]) from [<c02570b8>] (kthread+0x178/0x180) In addition to restarting or exiting the loop, it is also necessary to abort the command and to release the host. Fixes: 216b4400 ("brcmfmac: Fix use after free in brcmf_sdio_readframes()") Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Brian Norris <briannorris@chromium.org> Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Acked-by:
<franky.lin@broadcom.com> Acked-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Daniel Jordan authored
[ Upstream commit 41ccdbfd ] According to Geert's report[0], kernel/padata.c: warning: 'err' may be used uninitialized in this function [-Wuninitialized]: => 539:2 Warning is seen only with older compilers on certain archs. The runtime effect is potentially returning garbage down the stack when padata's cpumasks are modified before any pcrypt requests have run. Simplest fix is to initialize err to the success value. [0] http://lkml.kernel.org/r/20200210135506.11536-1-geert@linux-m68k.org Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Fixes: bbefa1dd ("crypto: pcrypt - Avoid deadlock by using per-instance padata queues") Signed-off-by:
Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Matthew Wilcox (Oracle) authored
[ Upstream commit bd40b17c ] Coverity pointed out that xas_sibling() was shifting xa_offset without promoting it to an unsigned long first, so the shift could cause an overflow and we'd get the wrong answer. The fix is obvious, and the new test-case provokes UBSAN to report an error: runtime error: shift exponent 60 is too large for 32-bit type 'int' Fixes: 19c30f4d ("XArray: Fix xa_find_after with multi-index entries") Reported-by:
Bjorn Helgaas <bhelgaas@google.com> Reported-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Cc: stable@vger.kernel.org Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Tariq Toukan authored
[ Upstream commit 56917766 ] We have an off-by-1 issue in the TCP seq comparison. The last sequence number that belongs to the TCP packet's payload is not "start_seq + len", but one byte before it. Fix it so the 'ends_before' is evaluated properly. This fixes a bug that results in error completions in the kTLS HW offload flows. Fixes: ffbd9ca9 ("net/mlx5e: kTLS, Fix corner-case checks in TX resync flow") Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Reviewed-by:
Boris Pismenny <borisp@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Len Brown authored
[ Upstream commit fcaa681c ] warning: `turbostat' uses 32-bit capabilities (legacy support in use) Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Len Brown authored
[ Upstream commit 1f81c5ef ] Some Chromebook BIOS' do not export an ACPI LPIT, which is how Linux finds the residency counter for CPU and SYSTEM low power states, that is exports in /sys/devices/system/cpu/cpuidle/*residency_us When these sysfs attributes are missing, check the debugfs attrubte from the pmc_core driver, which accesses the same counter value. Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Len Brown authored
[ Upstream commit d8d005ba ] Warning: ‘__builtin_strncpy’ specified bound 20 equals destination size [-Wstringop-truncation] reduce param to strncpy, to guarantee that a null byte is always copied into destination buffer. Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
James Zhu authored
[ Upstream commit acfc62dc ] fix typo for vcn1 idle check Signed-off-by:
James Zhu <James.Zhu@amd.com> Reviewed-by:
Leo Liu <leo.liu@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Eugeniy Paltsev authored
[ Upstream commit 785d74ec ] Even though INITRAMFS_SOURCE kconfig option isn't set in most of defconfigs it is used (set) extensively by various build systems. Commit f26661e1 ("initramfs: make initramfs compression choice non-optional") has changed default compression mode. Previously we compress initramfs using available compression algorithm. Now we don't use any compression at all by default. It significantly increases the image size in case of build system chooses embedded initramfs. Initially I faced with this issue while using buildroot. As of today it's not possible to set preferred compression mode in target defconfig as this option depends on INITRAMFS_SOURCE being set. Modification of all build systems either doesn't look like good option. Let's instead rewrite initramfs compression mode choices list the way that "INITRAMFS_COMPRESSION_NONE" will be the last option in the list. In that case it will be chosen ...
-
Gerd Hoffmann authored
[ Upstream commit 8c34cd1a ] Shutdown of firmware framebuffer has a bunch of problems. Because of this the framebuffer region might still be reserved even after drm_fb_helper_remove_conflicting_pci_framebuffers() returned. Don't consider pci_request_region() failure for the framebuffer region as fatal error to workaround this issue. Reported-by:
Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Link: http://patchwork.freedesktop.org/patch/msgid/20200313084152.2734-1-kraxel@redhat.com Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Mario Kleiner authored
[ Upstream commit dec9de2a ] This fixes a problem found on the MacBookPro 2017 Retina panel: The panel reports 10 bpc color depth in its EDID, and the firmware chooses link settings at boot which support enough bandwidth for 10 bpc (324000 kbit/sec aka LINK_RATE_RBR2 aka 0xc), but the DP_MAX_LINK_RATE dpcd register only reports 2.7 Gbps (multiplier value 0xa) as possible, in direct contradiction of what the firmware successfully set up. This restricts the panel to 8 bpc, not providing the full color depth of the panel on Linux <= 5.5. Additionally, commit '4a8ca46b ("drm/amd/display: Default max bpc to 16 for eDP")' introduced into Linux 5.6-rc1 will unclamp panel depth to its full 10 bpc, thereby requiring a eDP bandwidth for all modes that exceeds the bandwidth available and causes all modes to fail validation -> No modes for the laptop panel -> failure to set any mode -> Panel goes dark. This patch adds a quirk specific to the MBP 2017 15" Retina panel to override reported max link rate to the correct maximum of 0xc = LINK_RATE_RBR2 to fix the darkness and reduced display precision. Please apply for Linux 5.6+ to avoid regressing Apple MBP panel support. Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Masahiro Yamada authored
[ Upstream commit 8cc4fd73 ] When a compiler supports multiple architectures, some compiler features can be dependent on the target architecture. This is typical for Clang, which supports multiple LLVM backends. Even for GCC, we need to take care of biarch compiler cases. It is not a problem when we evaluate cc-option in Makefiles because cc-option is tested against the flag in question + $(KBUILD_CFLAGS). The cc-option in Kconfig, on the other hand, does not accumulate tested flags. Due to this simplification, it could potentially test cc-option against a different target. At first, Kconfig always evaluated cc-option against the host architecture. Since commit e8de12fb ("kbuild: Check for unknown options with cc-option usage in Kconfig and clang"), in case of cross-compiling with Clang, the target triple is correctly passed to Kconfig. The case with biarch GCC (and native build with Clang) is still not handled properly. We need to pass some flags to specify the target machine bit. Due to the design, all the macros in Kconfig are expanded in the parse stage, where we do not know the target bit size yet. For example, arch/x86/Kconfig allows a user to toggle CONFIG_64BIT. If a compiler flag -foo depends on the machine bit, it must be tested twice, one with -m32 and the other with -m64. However, -m32/-m64 are not always recognized. So, this commits adds m64-flag and m32-flag macros. They expand to -m32, -m64, respectively if supported. Or, they expand to an empty string if unsupported. The typical usage is like this: config FOO bool default $(cc-option,$(m64-flag) -foo) if 64BIT default $(cc-option,$(m32-flag) -foo) This is clumsy, but there is no elegant way to handle this in the current static macro expansion. There was discussion for static functions vs dynamic functions. The consensus was to go as far as possible with the static functions. (https://lkml.org/lkml/2018/3/2/22 ) Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Tested-by:
George Spelvin <lkml@sdf.org> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Prabhath Sajeepa authored
[ Upstream commit 9134ae2a ] The timeout of identify cmd, which is invoked as part of admin queue creation, can result in freeing of async event data both in nvme_rdma_timeout handler and error handling path of nvme_rdma_configure_admin queue thus causing NULL pointer reference. Call Trace: ? nvme_rdma_setup_ctrl+0x223/0x800 [nvme_rdma] nvme_rdma_create_ctrl+0x2ba/0x3f7 [nvme_rdma] nvmf_dev_write+0xa54/0xcc6 [nvme_fabrics] __vfs_write+0x1b/0x40 vfs_write+0xb2/0x1b0 ksys_write+0x61/0xd0 __x64_sys_write+0x1a/0x20 do_syscall_64+0x60/0x1e0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reviewed-by:
Roland Dreier <roland@purestorage.com> Reviewed-by:
Max Gurtovoy <maxg@mellanox.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Prabhath Sajeepa <psajeepa@purestorage.com> Signed-off-by:
Keith Busch <kbusch@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
- Apr 02, 2020
-
-
Greg Kroah-Hartman authored
-
Madalin Bucur authored
commit d79e9d7c upstream. The correct setting for the RGMII ports on LS1046ARDB is to enable delay on both Rx and Tx so the interface mode used must be PHY_INTERFACE_MODE_RGMII_ID. Since commit 1b3047b5 ("net: phy: realtek: add support for configuring the RX delay on RTL8211F") the Realtek 8211F PHY driver has control over the RGMII RX delay and it is disabling it for RGMII_TXID. The LS1046ARDB uses two such PHYs in RGMII_ID mode but in the device tree the mode was described as "rgmii". Changing the phy-connection-type to "rgmii-id" to address the issue. Fixes: 3fa395d2 ("arm64: dts: add LS1046A DPAA FMan nodes") Signed-off-by:
Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Madalin Bucur authored
commit 4022d808 upstream. The correct setting for the RGMII ports on LS1043ARDB is to enable delay on both Rx and Tx so the interface mode used must be PHY_INTERFACE_MODE_RGMII_ID. Since commit 1b3047b5 ("net: phy: realtek: add support for configuring the RX delay on RTL8211F") the Realtek 8211F PHY driver has control over the RGMII RX delay and it is disabling it for RGMII_TXID. The LS1043ARDB uses two such PHYs in RGMII_ID mode but in the device tree the mode was described as "rgmii_txid". This issue was not apparent at the time as the PHY driver took the same action for RGMII_TXID and RGMII_ID back then but it became visible (RX no longer working) after the above patch. Changing the phy-connection-type to "rgmii-id" to address the issue. Fixes: bf02f2ff ("arm64: dts: add LS1043A DPAA FMan support") Signed-off-by:
Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chen-Yu Tsai authored
commit fe3a0482 upstream. When the AHCI device node was added, it was added in the wrong location in the device tree file. The device nodes should be sorted by register address. Move the device node to before EHCI1, where it belongs. Fixes: 41c64d33 ("ARM: dts: sun8i: r40: add sata node") Acked-by:
Maxime Ripard <mripard@kernel.org> Reviewed-by:
Andre Przywara <andre.przywara@arm.com> Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arthur Demchenkov authored
commit 0c5220a3 upstream. Commit a758f50f ("mtd: onenand: omap2: Configure driver from DT") started using DT specified timings for GPMC, and as a result the OneNAND stopped working on N900 as we had wrong values in the DT. Fix by updating the values to bootloader timings that have been tested to be working on Nokia N900 with OneNAND manufacturers: Samsung, Numonyx. Fixes: a758f50f ("mtd: onenand: omap2: Configure driver from DT") Signed-off-by:
Arthur Demchenkov <spinal.by@gmail.com> Tested-by:
Merlijn Wajer <merlijn@wizzup.org> Reviewed-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marco Felsch authored
commit 636b45b8 upstream. The current set minimum voltage of 730000µV seems to be wrong. I don't know the document which specifies that but the imx6qdl datasheets says that the minimum voltage should be 0.925V for VDD_ARM (LDO bypassed, lowest opp) and 1.15V for VDD_SOC (LDO bypassed, lowest opp). Fixes: ddec5d1c ("ARM: dts: imx6: Add initial support for phyCORE-i.MX 6 SOM") Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nick Hudson authored
commit 6687c201 upstream. Define the sdhci pinctrl state as "default" so it gets applied correctly and to match all other RPis. Fixes: 2c7c040c ("ARM: dts: bcm2835: Add Raspberry Pi Zero W") Signed-off-by:
Nick Hudson <skrll@netbsd.org> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sungbo Eo authored
commit deeabb4c upstream. Disable all rps-irq interrupts during driver initialization to prevent an accidental interrupt on GIC. Fixes: 84316f4e ("ARM: boot: dts: Add Oxford Semiconductor OX810SE dtsi") Fixes: 38d4a537 ("ARM: dts: Add support for OX820 and Pogoplug V3") Signed-off-by:
Sungbo Eo <mans0n@gorani.run> Acked-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-