- Sep 15, 2022
-
-
Yan Xinyu authored
commit 8d5fc280 upstream. Add support for OPPO R11 USB diag serial port to option driver. This phone uses Qualcomm Snapdragon 660 SoC. usb-devices output: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22d9 ProdID=276c Rev=04.04 S: Manufacturer=OPPO S: Product=SDM660-MTP _SN:09C6BCA7 S: SerialNumber=beb2c403 C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs Signed-off-by:
Yan Xinyu <sdlyyxy@bupt.edu.cn> Link: https://lore.kernel.org/r/20220714102037.4113889-1-sdlyyxy@bupt.edu.cn Link: https://lore.kernel.org/r/Yt1WfSZk03Plpnan@hovoldconsulting.com Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit ceb40384 upstream. Add the device id for Decagon Devices USB Cable Adapter. Link: https://lore.kernel.org/r/trinity-819f9db2-d3e1-40e9-a669-9c245817c046-1661523546680@msvc-mesg-web108 Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathias Nyman authored
commit 33e32158 upstream. After xHC controller is started, either in probe or resume, it can take a while before any of the connected usb devices are visible to the roothub due to link training. It's possible xhci driver loads, sees no acivity and suspends the host before the USB device is visible. In one testcase with a hotplugged xHC controller the host finally detected the connected USB device and generated a wake 500ms after host initial start. If hosts didn't suspend the device duringe training it probablty wouldn't take up to 500ms to detect it, but looking at specs reveal USB3 link training has a couple long timeout values, such as 120ms RxDetectQuietTimeout, and 360ms PollingLFPSTimeout. So Add a 500ms grace period that keeps polling the roothub for 500ms after start, preventing runtime suspend until USB devices are detected. Cc: stable@vger.kernel.org Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220825150840.132216-3-mathias.nyman@linux.intel.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mika Westerberg authored
commit eb100b8f upstream. The received notification packet is held in pkg->buffer and not in pkg itself. Fix this by using the correct buffer. Fixes: 81a54b5e ("thunderbolt: Let the connection manager handle all notifications") Cc: stable@vger.kernel.org Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Armin Wolf authored
[ Upstream commit f233d2be ] The driver does not check if the cooling state passed to gpio_fan_set_cur_state() exceeds the maximum cooling state as stored in fan_data->num_speeds. Since the cooling state is later used as an array index in set_fan_speed(), an array out of bounds access can occur. This can be exploited by setting the state of the thermal cooling device to arbitrary values, causing for example a kernel oops when unavailable memory is accessed this way. Example kernel oops: [ 807.987276] Unable to handle kernel paging request at virtual address ffffff80d0588064 [ 807.987369] Mem abort info: [ 807.987398] ESR = 0x96000005 [ 807.987428] EC = 0x25: DABT (current EL), IL = 32 bits [ 807.987477] SET = 0, FnV = 0 [ 807.987507] EA = 0, S1PTW = 0 [ 807.987536] FSC = 0x05: level 1 translation fault [ 807.987570] Data abort info: [ 807.987763] ISV = 0, ISS = 0x00000005 [ 807.987801] CM = 0, WnR = 0 [ 807.987832] swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000001165000 [ 807.987872] [ffffff80d0588064] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 807.987961] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 807.987992] Modules linked in: cmac algif_hash aes_arm64 algif_skcipher af_alg bnep hci_uart btbcm bluetooth ecdh_generic ecc 8021q garp stp llc snd_soc_hdmi_codec brcmfmac vc4 brcmutil cec drm_kms_helper snd_soc_core cfg80211 snd_compress bcm2835_codec(C) snd_pcm_dmaengine syscopyarea bcm2835_isp(C) bcm2835_v4l2(C) sysfillrect v4l2_mem2mem bcm2835_mmal_vchiq(C) raspberrypi_hwmon sysimgblt videobuf2_dma_contig videobuf2_vmalloc fb_sys_fops videobuf2_memops rfkill videobuf2_v4l2 videobuf2_common i2c_bcm2835 snd_bcm2835(C) videodev snd_pcm snd_timer snd mc vc_sm_cma(C) gpio_fan uio_pdrv_genirq uio drm fuse drm_panel_orientation_quirks backlight ip_tables x_tables ipv6 [ 807.988508] CPU: 0 PID: 1321 Comm: bash Tainted: G C 5.15.56-v8+ #1575 [ 807.988548] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [ 807.988574] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 807.988608] pc : set_fan_speed.part.5+0x34/0x80 [gpio_fan] [ 807.988654] lr : gpio_fan_set_cur_state+0x34/0x50 [gpio_fan] [ 807.988691] sp : ffffffc008cf3bd0 [ 807.988710] x29: ffffffc008cf3bd0 x28: ffffff80019edac0 x27: 0000000000000000 [ 807.988762] x26: 0000000000000000 x25: 0000000000000000 x24: ffffff800747c920 [ 807.988787] x23: 000000000000000a x22: ffffff800369f000 x21: 000000001999997c [ 807.988854] x20: ffffff800369f2e8 x19: ffffff8002ae8080 x18: 0000000000000000 [ 807.988877] x17: 0000000000000000 x16: 0000000000000000 x15: 000000559e271b70 [ 807.988938] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 807.988960] x11: 0000000000000000 x10: ffffffc008cf3c20 x9 : ffffffcfb60c741c [ 807.989018] x8 : 000000000000000a x7 : 00000000ffffffc9 x6 : 0000000000000009 [ 807.989040] x5 : 000000000000002a x4 : 0000000000000000 x3 : ffffff800369f2e8 [ 807.989062] x2 : 000000000000e780 x1 : 0000000000000001 x0 : ffffff80d0588060 [ 807.989084] Call trace: [ 807.989091] set_fan_speed.part.5+0x34/0x80 [gpio_fan] [ 807.989113] gpio_fan_set_cur_state+0x34/0x50 [gpio_fan] [ 807.989199] cur_state_store+0x84/0xd0 [ 807.989221] dev_attr_store+0x20/0x38 [ 807.989262] sysfs_kf_write+0x4c/0x60 [ 807.989282] kernfs_fop_write_iter+0x130/0x1c0 [ 807.989298] new_sync_write+0x10c/0x190 [ 807.989315] vfs_write+0x254/0x378 [ 807.989362] ksys_write+0x70/0xf8 [ 807.989379] __arm64_sys_write+0x24/0x30 [ 807.989424] invoke_syscall+0x4c/0x110 [ 807.989442] el0_svc_common.constprop.3+0xfc/0x120 [ 807.989458] do_el0_svc+0x2c/0x90 [ 807.989473] el0_svc+0x24/0x60 [ 807.989544] el0t_64_sync_handler+0x90/0xb8 [ 807.989558] el0t_64_sync+0x1a0/0x1a4 [ 807.989579] Code: b9403801 f9402800 7100003f 8b35cc00 (b9400416) [ 807.989627] ---[ end trace 8ded4c918658445b ]--- Fix this by checking the cooling state and return an error if it exceeds the maximum cooling state. Tested on a Raspberry Pi 3. Fixes: b5cf88e4 ("(gpio-fan): Add thermal control hooks") Signed-off-by:
Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20220830011101.178843-1-W_Armin@gmx.de Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Peter Robinson authored
[ Upstream commit 99077ad6 ] Add the module alias so the rk805-pwrkey driver will autoload when built as a module. Fixes: 5a35b85c ("Input: add power key driver for Rockchip RK805 PMIC") Signed-off-by:
Peter Robinson <pbrobinson@gmail.com> Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20220612225437.3628788-1-pbrobinson@gmail.com Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Chen-Yu Tsai authored
[ Upstream commit 4b592061 ] In the original commit 9a34b453 ("clk: Add support for runtime PM"), the commit message mentioned that pm_runtime_put_sync() would be done at the end of clk_core_unprepare(). This mirrors the operations in clk_core_prepare() in the opposite order. However, the actual code that was added wasn't in the order the commit message described. Move clk_pm_runtime_put() to the end of clk_core_unprepare() so that it is in the correct order. Fixes: 9a34b453 ("clk: Add support for runtime PM") Signed-off-by:
Chen-Yu Tsai <wenst@chromium.org> Reviewed-by:
Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20220822081424.1310926-3-wenst@chromium.org Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Stephen Boyd authored
[ Upstream commit abb5f3f4 ] This reverts commit 35b0fac8 . Alexander reports that it causes boot failures on i.MX8M Plus based boards (specifically imx8mp-tqma8mpql-mba8mpxl.dts). Reported-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Cc: Chen-Yu Tsai <wenst@chromium.org> Fixes: 35b0fac8 ("clk: core: Honor CLK_OPS_PARENT_ENABLE for clk gate ops") Link: https://lore.kernel.org/r/12115951.O9o76ZdvQC@steina-w Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220831175326.2523912-1-sboyd@kernel.org Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Chen-Yu Tsai authored
[ Upstream commit 35b0fac8 ] In the previous commits that added CLK_OPS_PARENT_ENABLE, support for this flag was only added to rate change operations (rate setting and reparent) and disabling unused subtree. It was not added to the clock gate related operations. Any hardware driver that needs it for these operations will either see bogus results, or worse, hang. This has been seen on MT8192 and MT8195, where the imp_ii2_* clk drivers set this, but dumping debugfs clk_summary would cause it to hang. Fixes: fc8726a2 ("clk: core: support clocks which requires parents enable (part 2)") Fixes: a4b3518d ("clk: core: support clocks which requires parents enable (part 1)") Signed-off-by:
Chen-Yu Tsai <wenst@chromium.org> Reviewed-by:
Nícolas F. R. A. Prado <nfraprado@collabora.com> Tested-by:
Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20220822081424.1310926-2-wenst@chromium.org Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Colin Ian King authored
[ Upstream commit 233f5674 ] There is a spelling mistake in a gvt_vgpu_err error message. Fix it. Fixes: 695fbc08 ("drm/i915/gvt: replace the gvt_err with gvt_vgpu_err") Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
Zhi Wang <zhi.a.wang@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20220315202449.2952845-1-colin.i.king@gmail.com Reviewed-by:
Zhi Wang <zhi.a.wang@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Carlos Llamas authored
commit a0e44c64 upstream. A transaction of type BINDER_TYPE_WEAK_HANDLE can fail to increment the reference for a node. In this case, the target proc normally releases the failed reference upon close as expected. However, if the target is dying in parallel the call will race with binder_deferred_release(), so the target could have released all of its references by now leaving the cleanup of the new failed reference unhandled. The transaction then ends and the target proc gets released making the ref->proc now a dangling pointer. Later on, ref->node is closed and we attempt to take spin_lock(&ref->proc->inner_lock), which leads to the use-after-free bug reported below. Let's fix this by cleaning up the failed reference on the spot instead of relying on the target to do so. ================================================================== BUG: KASAN: use-after-free in _raw_spin_lock+0xa8/0x150 Write of size 4 at addr ffff5ca207094238 by task kworker/1:0/590 CPU: 1 PID: 590 Comm: kworker/1:0 Not tainted 5.19.0-rc8 #10 Hardware name: linux,dummy-virt (DT) Workqueue: events binder_deferred_func Call trace: dump_backtrace.part.0+0x1d0/0x1e0 show_stack+0x18/0x70 dump_stack_lvl+0x68/0x84 print_report+0x2e4/0x61c kasan_report+0xa4/0x110 kasan_check_range+0xfc/0x1a4 __kasan_check_write+0x3c/0x50 _raw_spin_lock+0xa8/0x150 binder_deferred_func+0x5e0/0x9b0 process_one_work+0x38c/0x5f0 worker_thread+0x9c/0x694 kthread+0x188/0x190 ret_from_fork+0x10/0x20 Acked-by:
Christian Brauner (Microsoft) <brauner@kernel.org> Signed-off-by:
Carlos Llamas <cmllamas@google.com> Cc: stable <stable@kernel.org> # 4.14+ Link: https://lore.kernel.org/r/20220801182511.3371447-1-cmllamas@google.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Niek Nooijens authored
commit 001047ea upstream. works perfectly with: modprobe ftdi_sio echo "0590 00b2" | tee /sys/module/ftdi_sio/drivers/usb-serial\:ftdi_sio/new_id > /dev/null but doing this every reboot is a pain in the ass. Signed-off-by:
Niek Nooijens <niek.nooijens@omron.com> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Helge Deller authored
commit 566f9c9f upstream. When changing the console font with ioctl(KDFONTOP) the new font size can be bigger than the previous font. A previous selection may thus now be outside of the new screen size and thus trigger out-of-bounds accesses to graphics memory if the selection is removed in vc_do_resize(). Prevent such out-of-memory accesses by dropping the selection before the various con_font_set() console handlers are called. Reported-by:
<syzbot+14b0e8f3fd1612e35350@syzkaller.appspotmail.com> Cc: stable <stable@kernel.org> Tested-by:
Khalid Masum <khalid.masum.92@gmail.com> Signed-off-by:
Helge Deller <deller@gmx.de> Link: https://lore.kernel.org/r/YuV9apZGNmGfjcor@p100 Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
commit e230a445 upstream. _Read/Write_MACREG callbacks are NULL so the read/write_macreg_hdl() functions don't do anything except free the "pcmd" pointer. It results in a use after free. Delete them. Fixes: 2865d42c ("staging: r8712u: Add the new driver to the mainline kernel") Cc: stable <stable@kernel.org> Reported-by:
Zheng Wang <hackerzheng666@gmail.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/Yw4ASqkYcUhUfoY2@kili Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Shenwei Wang authored
commit 846651ec upstream. The setting of RS485 RTS polarity is inverse in the current driver. When the property of 'rs485-rts-active-low' is enabled in the dts node, the RTS signal should be LOW during sending. Otherwise, if there is no such a property, the RTS should be HIGH during sending. Fixes: 03895cf4 ("tty: serial: fsl_lpuart: Add support for RS-485") Cc: stable <stable@kernel.org> Signed-off-by:
Nicolas Diaz <nicolas.diaz@nxp.com> Signed-off-by:
Shenwei Wang <shenwei.wang@nxp.com> Link: https://lore.kernel.org/r/20220805144529.604856-1-shenwei.wang@nxp.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yacan Liu authored
[ Upstream commit a8424a9b ] For passive connections, the refcount increment has been done in smc_clcsock_accept()-->smc_sock_alloc(). Fixes: 3b2dec26 ("net/smc: restructure client and server code in af_smc") Signed-off-by:
Yacan Liu <liuyacan@corp.netease.com> Reviewed-by:
Tony Lu <tonylu@linux.alibaba.com> Link: https://lore.kernel.org/r/20220830152314.838736-1-liuyacan@corp.netease.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jakub Kicinski authored
[ Upstream commit 0b4f688d ] This reverts commit 90fabae8. Patch was applied hastily, revert and let the v2 be reviewed. Fixes: 90fabae8 ("sch_cake: Return __NET_XMIT_STOLEN when consuming enqueued skb") Link: https://lore.kernel.org/all/87wnao2ha3.fsf@toke.dk/ Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Eric Dumazet authored
[ Upstream commit 8c705212 ] challenge_timestamp can be read an written by concurrent threads. This was expected, but we need to annotate the race to avoid potential issues. Following patch moves challenge_timestamp and challenge_count to per-netns storage to provide better isolation. Fixes: 354e4aa3 ("tcp: RFC 5961 5.2 Blind Data Injection Attack Mitigation") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Toke Høiland-Jørgensen authored
[ Upstream commit 90fabae8 ] When the GSO splitting feature of sch_cake is enabled, GSO superpackets will be broken up and the resulting segments enqueued in place of the original skb. In this case, CAKE calls consume_skb() on the original skb, but still returns NET_XMIT_SUCCESS. This can confuse parent qdiscs into assuming the original skb still exists, when it really has been freed. Fix this by adding the __NET_XMIT_STOLEN flag to the return value in this case. Fixes: 0c850344 ("sch_cake: Conditionally split GSO segments") Signed-off-by:
Toke Høiland-Jørgensen <toke@toke.dk> Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-18231 Link: https://lore.kernel.org/r/20220831092103.442868-1-toke@toke.dk Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Cong Wang authored
[ Upstream commit 8fc29ff3 ] strp_init() is called just a few lines above this csk->sk_user_data check, it also initializes strp->work etc., therefore, it is unnecessary to call strp_done() to cancel the freshly initialized work. And if sk_user_data is already used by KCM, psock->strp should not be touched, particularly strp->work state, so we need to move strp_init() after the csk->sk_user_data check. This also makes a lockdep warning reported by syzbot go away. Reported-and-tested-by:
<syzbot+9fc084a4348493ef65d2@syzkaller.appspotmail.com> Reported-by:
<syzbot+e696806ef96cdd2d87cd@syzkaller.appspotmail.com> Fixes: e5571240 ("kcm: Check if sk_user_data already set in kcm_attach") Fixes: dff8baa2 ("kcm: Call strp_stop before strp_done in kcm_attach") Cc: Tom Herbert <tom@herbertland.com> Signed-off-by:
Cong Wang <cong.wang@bytedance.com> Link: https://lore.kernel.org/r/20220827181314.193710-1-xiyou.wangcong@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Duoming Zhou authored
[ Upstream commit c0955bf9 ] The function neigh_timer_handler() is a timer handler that runs in an atomic context. When used by rocker, neigh_timer_handler() calls "kzalloc(.., GFP_KERNEL)" that may sleep. As a result, the sleep in atomic context bug will happen. One of the processes is shown below: ofdpa_fib4_add() ... neigh_add_timer() (wait a timer) neigh_timer_handler() neigh_release() neigh_destroy() rocker_port_neigh_destroy() rocker_world_port_neigh_destroy() ofdpa_port_neigh_destroy() ofdpa_port_ipv4_neigh() kzalloc(sizeof(.., GFP_KERNEL) //may sleep This patch changes the gfp_t parameter of kzalloc() from GFP_KERNEL to GFP_ATOMIC in order to mitigate the bug. Fixes: 00fc0c51 ("rocker: Change world_ops API and implementation to be switchdev independant") Signed-off-by:
Duoming Zhou <duoming@zju.edu.cn> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Mathias Nyman authored
[ Upstream commit 8531aa16 ] This reverts commit 83810f84. Turning off port power in shutdown did cause issues such as a laptop not proprly powering off, and some specific usb devies failing to enumerate the subsequent boot after a warm reset. So revert this. Fixes: 83810f84 ("xhci: turn off port power in shutdown") Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220825150840.132216-4-mathias.nyman@linux.intel.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Dan Carpenter authored
[ Upstream commit d776763f ] The return type is supposed to be ssize_t, which is signed long, but "r" was declared as unsigned int. This means that on 64 bit systems we return positive values instead of negative error codes. Fixes: 80a3511d ("cfg80211: add debugfs HT40 allow map") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YutvOQeJm0UjLhwU@kili Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Lin Ma authored
[ Upstream commit afe7116f ] There is a possible race condition (use-after-free) like below (FREE) | (USE) adf7242_remove | adf7242_channel cancel_delayed_work_sync | destroy_workqueue (1) | adf7242_cmd_rx | mod_delayed_work (2) | The root cause for this race is that the upper layer (ieee802154) is unaware of this detaching event and the function adf7242_channel can be called without any checks. To fix this, we can add a flag write at the beginning of adf7242_remove and add flag check in adf7242_channel. Or we can just defer the destructive operation like other commit 3e0588c2 ("hamradio: defer ax25 kfree after unregister_netdev") which let the ieee802154_unregister_hw() to handle the synchronization. This patch takes the second option. Fixes: 58e9683d ("net: ieee802154: adf7242: Fix OCL calibration runs") Signed-off-by:
Lin Ma <linma@zju.edu.cn> Acked-by:
Michael Hennerich <michael.hennerich@analog.com> Link: https://lore.kernel.org/r/20220808034224.12642-1-linma@zju.edu.cn Signed-off-by:
Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Andy Shevchenko authored
[ Upstream commit 0a90ed8d ] On Intel hardware the SLP_TYPx bitfield occupies bits 10-12 as per ACPI specification (see Table 4.13 "PM1 Control Registers Fixed Hardware Feature Control Bits" for the details). Fix the mask and other related definitions accordingly. Fixes: 93e5eadd ("x86/platform: New Intel Atom SOC power management controller driver") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220801113734.36131-1-andriy.shevchenko@linux.intel.com Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Douglas Anderson authored
[ Upstream commit 1e00d6ac ] 3 regulators are listed but the number 2 is specified. Fix it. Fixes: 3a3ff88a ("drm/msm/dsi: Add 8x96 info in dsi_cfg") Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/496318/ Link: https://lore.kernel.org/r/20220804073608.v4.1.I1056ee3f77f71287f333279efe4c85f88d403f65@changeid Signed-off-by:
Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
sunliming authored
[ Upstream commit 2f25a1fb ] Fix the inconsistent indenting in function msm_dsi_dphy_timing_calc_v3(). Fix the following smatch warnings: drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:350 msm_dsi_dphy_timing_calc_v3() warn: inconsistent indenting Fixes: f1fa7ff4 ("drm/msm/dsi: implement auto PHY timing calculator for 10nm PHY") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
sunliming <sunliming@kylinos.cn> Reviewed-by:
Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/494662/ Link: https://lore.kernel.org/r/20220719015622.646718-1-sunliming@kylinos.cn Signed-off-by:
Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Enguerrand de Ribaucourt authored
commit c96614ee upstream. When unplugging an Ethernet cable, false carrier events were produced by the PHY at a very high rate. Once the false carrier counter full, an interrupt was triggered every few clock cycles until the cable was replugged. This resulted in approximately 10k/s interrupts. Since the false carrier counter (FCSCR) is never used, we can safely disable this interrupt. In addition to improving performance, this also solved MDIO read timeouts I was randomly encountering with an i.MX8 fec MAC because of the interrupt flood. The interrupt count and MDIO timeout fix were tested on a v5.4.110 kernel. Fixes: 87461f7a ("net: phy: DP83822 initial driver submission") Signed-off-by:
Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yee Lee authored
This reverts commit 23c2d497. Commit 23c2d497 ("mm: kmemleak: take a full lowmem check in kmemleak_*_phys()") brought false leak alarms on some archs like arm64 that does not init pfn boundary in early booting. The final solution lands on linux-6.0: commit 0c24e061 ("mm: kmemleak: add rbtree and store physical address for objects allocated with PA"). Revert this commit before linux-6.0. The original issue of invalid PA can be mitigated by additional check in devicetree. The false alarm report is as following: Kmemleak output: (Qemu/arm64) unreferenced object 0xffff0000c0170a00 (size 128): comm "swapper/0", pid 1, jiffies 4294892404 (age 126.208s) hex dump (first 32 bytes): 62 61 73 65 00 00 00 00 00 00 00 00 00 00 00 00 base............ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<(____ptrval____)>] __kmalloc_track_caller+0x1b0/0x2e4 [<(____ptrval____)>] kstrdup_const+0x8c/0xc4 [<(____ptrval____)>] kvasprintf_const+0xbc/0xec [<(____ptrval____)>] kobject_set_name_vargs+0x58/0xe4 [<(____ptrval____)>] kobject_add+0x84/0x100 [<(____ptrval____)>] __of_attach_node_sysfs+0x78/0xec [<(____ptrval____)>] of_core_init+0x68/0x104 [<(____ptrval____)>] driver_init+0x28/0x48 [<(____ptrval____)>] do_basic_setup+0x14/0x28 [<(____ptrval____)>] kernel_init_freeable+0x110/0x178 [<(____ptrval____)>] kernel_init+0x20/0x1a0 [<(____ptrval____)>] ret_from_fork+0x10/0x20 This pacth is also applicable to linux-5.17.y/linux-5.18.y/linux-5.19.y Cc: <stable@vger.kernel.org> Signed-off-by:
Yee Lee <yee.lee@mediatek.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Linus Torvalds authored
commit 2f79cdfe upstream. Commit d4252071 ("add barriers to buffer_uptodate and set_buffer_uptodate") added proper memory barriers to the buffer head BH_Uptodate bit, so that anybody who tests a buffer for being up-to-date will be guaranteed to actually see initialized state. However, that commit didn't _just_ add the memory barrier, it also ended up dropping the "was it already set" logic that the BUFFER_FNS() macro had. That's conceptually the right thing for a generic "this is a memory barrier" operation, but in the case of the buffer contents, we really only care about the memory barrier for the _first_ time we set the bit, in that the only memory ordering protection we need is to avoid anybody seeing uninitialized memory contents. Any other access ordering wouldn't be about the BH_Uptodate bit anyway, and would require some other proper lock (typically BH_Lock or the folio lock). A reader that races with somebody invalidating the buffer head isn't an issue wrt the memory ordering, it's a serialization issue. Now, you'd think that the buffer head operations don't matter in this day and age (and I certainly thought so), but apparently some loads still end up being heavy users of buffer heads. In particular, the kernel test robot reported that not having this bit access optimization in place caused a noticeable direct IO performance regression on ext4: fxmark.ssd_ext4_no_jnl_DWTL_54_directio.works/sec -26.5% regression although you presumably need a fast disk and a lot of cores to actually notice. Link: https://lore.kernel.org/all/Yw8L7HTZ%2FdE2%2Fo9C@xsang-OptiPlex-9020/ Reported-by:
kernel test robot <oliver.sang@intel.com> Tested-by:
Fengwei Yin <fengwei.yin@intel.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: stable@kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stanislaw Gruszka authored
commit 6d0ef724 upstream. This reverts commit a8eb8e6f as it can cause invalid link quality command sent to the firmware and address the off-by-one issue by fixing condition of while loop. Cc: stable@vger.kernel.org Fixes: a8eb8e6f ("wifi: iwlegacy: 4965: fix potential off-by-one overflow in il4965_rs_fill_link_cmd()") Signed-off-by:
Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220815073737.GA999388@wp.pl Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hyunwoo Kim authored
commit 9cb636b5 upstream. A race condition may occur if the user calls close() on another thread during a write() operation on the device node of the efi capsule. This is a race condition that occurs between the efi_capsule_write() and efi_capsule_flush() functions of efi_capsule_fops, which ultimately results in UAF. So, the page freeing process is modified to be done in efi_capsule_release() instead of efi_capsule_flush(). Cc: <stable@vger.kernel.org> # v4.9+ Signed-off-by:
Hyunwoo Kim <imv4bel@gmail.com> Link: https://lore.kernel.org/all/20220907102920.GA88602@ubuntu/ Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Isaac J. Manjarres authored
commit 25e9fbf0 upstream. Both __device_attach_driver() and __driver_attach() check the return code of the bus_type.match() function to see if the device needs to be added to the deferred probe list. After adding the device to the list, the logic attempts to bind the device to the driver anyway, as if the device had matched with the driver, which is not correct. If __device_attach_driver() detects that the device in question is not ready to match with a driver on the bus, then it doesn't make sense for the device to attempt to bind with the current driver or continue attempting to match with any of the other drivers on the bus. So, update the logic in __device_attach_driver() to reflect this. If __driver_attach() detects that a driver tried to match with a device that is not ready to match yet, then the driver should not attempt to bind with the device. However, the driver can still attempt to match and bind with other devices on the bus, as drivers can be bound to multiple devices. So, update the logic in __driver_attach() to reflect this. Fixes: 656b8035 ("ARM: 8524/1: driver cohandle -EPROBE_DEFER from bus_type.match()") Cc: stable@vger.kernel.org Cc: Saravana Kannan <saravanak@google.com> Reported-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Saravana Kannan <saravanak@google.com> Signed-off-by:
Isaac J. Manjarres <isaacmanjarres@google.com> Link: https://lore.kernel.org/r/20220817184026.3468620-1-isaacmanjarres@google.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- Sep 05, 2022
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20220902121400.219861128@linuxfoundation.org Tested-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Tested-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
Pavel Machek (CIP) <pavel@denx.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yang Yingliang authored
commit d5485d9d upstream. It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So add all skb to a tmp list, then free them after spin_unlock_irqrestore() at once. Fixes: 66ba215c ("neigh: fix possible DoS due to net iface start/stop loop") Suggested-by:
Denis V. Lunev <den@openvz.org> Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Reviewed-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kuniyuki Iwashima authored
commit 9c80e799 upstream. The assumption in __disable_kprobe() is wrong, and it could try to disarm an already disarmed kprobe and fire the WARN_ONCE() below. [0] We can easily reproduce this issue. 1. Write 0 to /sys/kernel/debug/kprobes/enabled. # echo 0 > /sys/kernel/debug/kprobes/enabled 2. Run execsnoop. At this time, one kprobe is disabled. # /usr/share/bcc/tools/execsnoop & [1] 2460 PCOMM PID PPID RET ARGS # cat /sys/kernel/debug/kprobes/list ffffffff91345650 r __x64_sys_execve+0x0 [FTRACE] ffffffff91345650 k __x64_sys_execve+0x0 [DISABLED][FTRACE] 3. Write 1 to /sys/kernel/debug/kprobes/enabled, which changes kprobes_all_disarmed to false but does not arm the disabled kprobe. # echo 1 > /sys/kernel/debug/kprobes/enabled # cat /sys/kernel/debug/kprobes/list ffffffff91345650 r __x64_sys_execve+0x0 [FTRACE] ffffffff91345650 k __x64_sys_execve+0x0 [DISABLED][FTRACE] 4. Kill execsnoop, when __disable_kprobe() calls disarm_kprobe() for the disabled kprobe and hits the WARN_ONCE() in __disarm_kprobe_ftrace(). # fg /usr/share/bcc/tools/execsnoop ^C Actually, WARN_ONCE() is fired twice, and __unregister_kprobe_top() misses some cleanups and leaves the aggregated kprobe in the hash table. Then, __unregister_trace_kprobe() initialises tk->rp.kp.list and creates an infinite loop like this. aggregated kprobe.list -> kprobe.list -. ^ | '.__.' In this situation, these commands fall into the infinite loop and result in RCU stall or soft lockup. cat /sys/kernel/debug/kprobes/list : show_kprobe_addr() enters into the infinite loop with RCU. /usr/share/bcc/tools/execsnoop : warn_kprobe_rereg() holds kprobe_mutex, and __get_valid_kprobe() is stuck in the loop. To avoid the issue, make sure we don't call disarm_kprobe() for disabled kprobes. [0] Failed to disarm kprobe-ftrace at __x64_sys_execve+0x0/0x40 (error -2) WARNING: CPU: 6 PID: 2460 at kernel/kprobes.c:1130 __disarm_kprobe_ftrace.isra.19 (kernel/kprobes.c:1129) Modules linked in: ena CPU: 6 PID: 2460 Comm: execsnoop Not tainted 5.19.0+ #28 Hardware name: Amazon EC2 c5.2xlarge/, BIOS 1.0 10/16/2017 RIP: 0010:__disarm_kprobe_ftrace.isra.19 (kernel/kprobes.c:1129) Code: 24 8b 02 eb c1 80 3d c4 83 f2 01 00 75 d4 48 8b 75 00 89 c2 48 c7 c7 90 fa 0f 92 89 04 24 c6 05 ab 83 01 e8 e4 94 f0 ff <0f> 0b 8b 04 24 eb b1 89 c6 48 c7 c7 60 fa 0f 92 89 04 24 e8 cc 94 RSP: 0018:ffff9e6ec154bd98 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffff930f7b00 RCX: 0000000000000001 RDX: 0000000080000001 RSI: ffffffff921461c5 RDI: 00000000ffffffff RBP: ffff89c504286da8 R08: 0000000000000000 R09: c0000000fffeffff R10: 0000000000000000 R11: ffff9e6ec154bc28 R12: ffff89c502394e40 R13: ffff89c502394c00 R14: ffff9e6ec154bc00 R15: 0000000000000000 FS: 00007fe800398740(0000) GS:ffff89c812d80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000c00057f010 CR3: 0000000103b54006 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> __disable_kprobe (kernel/kprobes.c:1716) disable_kprobe (kernel/kprobes.c:2392) __disable_trace_kprobe (kernel/trace/trace_kprobe.c:340) disable_trace_kprobe (kernel/trace/trace_kprobe.c:429) perf_trace_event_unreg.isra.2 (./include/linux/tracepoint.h:93 kernel/trace/trace_event_perf.c:168) perf_kprobe_destroy (kernel/trace/trace_event_perf.c:295) _free_event (kernel/events/core.c:4971) perf_event_release_kernel (kernel/events/core.c:5176) perf_release (kernel/events/core.c:5186) __fput (fs/file_table.c:321) task_work_run (./include/linux/sched.h:2056 (discriminator 1) kernel/task_work.c:179 (discriminator 1)) exit_to_user_mode_prepare (./include/linux/resume_user_mode.h:49 kernel/entry/common.c:169 kernel/entry/common.c:201) syscall_exit_to_user_mode (./arch/x86/include/asm/jump_label.h:55 ./arch/x86/include/asm/nospec-branch.h:384 ./arch/x86/include/asm/entry-common.h:94 kernel/entry/common.c:133 kernel/entry/common.c:296) do_syscall_64 (arch/x86/entry/common.c:87) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) RIP: 0033:0x7fe7ff210654 Code: 15 79 89 20 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb be 0f 1f 00 8b 05 9a cd 20 00 48 63 ff 85 c0 75 11 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 3a f3 c3 48 83 ec 18 48 89 7c 24 08 e8 34 fc RSP: 002b:00007ffdbd1d3538 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000000000000008 RCX: 00007fe7ff210654 RDX: 0000000000000000 RSI: 0000000000002401 RDI: 0000000000000008 RBP: 0000000000000000 R08: 94ae31d6fda838a4 R0900007fe8001c9d30 R10: 00007ffdbd1d34b0 R11: 0000000000000246 R12: 00007ffdbd1d3600 R13: 0000000000000000 R14: fffffffffffffffc R15: 00007ffdbd1d3560 </TASK> Link: https://lkml.kernel.org/r/20220813020509.90805-1-kuniyu@amazon.com Fixes: 69d54b91 ("kprobes: makes kprobes/enabled works correctly for optimized kprobes.") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Reported-by:
Ayushman Dutta <ayudutta@amazon.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: Kuniyuki Iwashima <kuniyu@amazon.com> Cc: Kuniyuki Iwashima <kuni1840@gmail.com> Cc: Ayushman Dutta <ayudutta@amazon.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Geert Uytterhoeven authored
[ Upstream commit aa5762c3 ] NF_CONNTRACK_PROCFS was marked obsolete in commit 54b07dca ("netfilter: provide config option to disable ancient procfs parts") in v3.3. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Juergen Gross authored
[ Upstream commit 7b6670b0 ] When booting under KVM the following error messages are issued: hypfs.7f5705: The hardware system does not support hypfs hypfs.7a79f0: Initialization of hypfs failed with rc=-61 Demote the severity of first message from "error" to "info" and issue the second message only in other error cases. Signed-off-by:
Juergen Gross <jgross@suse.com> Acked-by:
Heiko Carstens <hca@linux.ibm.com> Acked-by:
Christian Borntraeger <borntraeger@linux.ibm.com> Link: https://lore.kernel.org/r/20220620094534.18967-1-jgross@suse.com [arch/s390/hypfs/hypfs_diag.c changed description] Signed-off-by:
Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Denis V. Lunev authored
[ Upstream commit 66ba215c ] Normal processing of ARP request (usually this is Ethernet broadcast packet) coming to the host is looking like the following: * the packet comes to arp_process() call and is passed through routing procedure * the request is put into the queue using pneigh_enqueue() if corresponding ARP record is not local (common case for container records on the host) * the request is processed by timer (within 80 jiffies by default) and ARP reply is sent from the same arp_process() using NEIGH_CB(skb)->flags & LOCALLY_ENQUEUED condition (flag is set inside pneigh_enqueue()) And here the problem comes. Linux kernel calls pneigh_queue_purge() which destroys the whole queue of ARP requests on ANY network interface start/stop event through __neigh_ifdown(). This is actually not a problem within the original world as network interface start/stop was accessible to the host 'root' only, which could do more destructive things. But the world is changed and there are Linux containers available. Here container 'root' has an access to this API and could be considered as untrusted user in the hosting (container's) world. Thus there is an attack vector to other containers on node when container's root will endlessly start/stop interfaces. We have observed similar situation on a real production node when docker container was doing such activity and thus other containers on the node become not accessible. The patch proposed doing very simple thing. It drops only packets from the same namespace in the pneigh_queue_purge() where network interface state change is detected. This is enough to prevent the problem for the whole node preserving original semantics of the code. v2: - do del_timer_sync() if queue is empty after pneigh_queue_purge() v3: - rebase to net tree Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@kernel.org> Cc: Yajun Deng <yajun.deng@linux.dev> Cc: Roopa Prabhu <roopa@nvidia.com> Cc: Christian Brauner <brauner@kernel.org> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com> Cc: Konstantin Khorenko <khorenko@virtuozzo.com> Cc: kernel@openvz.org Cc: devel@openvz.org Investigated-by:
Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com> Signed-off-by:
Denis V. Lunev <den@openvz.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Fudong Wang authored
[ Upstream commit b2a93490 ] [Why] After ODM clock off, optc underflow bit will be kept there always and clear not work. We need to clear that before clock off. [How] Clear that if have when clock off. Reviewed-by:
Alvin Lee <alvin.lee2@amd.com> Acked-by:
Tom Chung <chiahsuan.chung@amd.com> Signed-off-by:
Fudong Wang <Fudong.Wang@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-