- Mar 02, 2022
-
-
Maxime Ripard authored
commit ecbd4912 upstream. In order to fill the drm_display_info structure each time an EDID is read, the code currently will call drm_add_display_info with the parsed EDID. drm_add_display_info will then call drm_reset_display_info to reset all the fields to 0, and then set them to the proper value depending on the EDID. In the color_formats case, we will thus report that we don't support any color format, and then fill it back with RGB444 plus the additional formats described in the EDID Feature Support byte. However, since that byte only contains format-related bits since the 1.4 specification, this doesn't happen if the EDID is following an earlier specification. In turn, it means that for one of these EDID, we end up with color_formats set to 0. The EDID 1.3 specification never really specifies what it means by RGB exactly, but since both HDMI and DVI will use RGB444, it's fairly safe to assume it's supposed to be RGB444. Let's move the addition of RGB444 to color_formats earlier in drm_add_display_info() so that it's always set for a digital display. Fixes: da05a5a7 ("drm: parse color format support for digital displays") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reported-by: Matthias Reichl <hias@horus.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220203115416.1137308-1-maxime@cerno.tech Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paul Blakey authored
commit d9b5ae5c upstream. Ipv6 ttl, label and tos fields are modified without first pulling/pushing the ipv6 header, which would have updated the hw csum (if available). This might cause csum validation when sending the packet to the stack, as can be seen in the trace below. Fix this by updating skb->csum if available. Trace resulted by ipv6 ttl dec and then sending packet to conntrack [actions: set(ipv6(hlimit=63)),ct(zone=99)]: [295241.900063] s_pf0vf2: hw csum failure [295241.923191] Call Trace: [295241.925728] <IRQ> [295241.927836] dump_stack+0x5c/0x80 [295241.931240] __skb_checksum_complete+0xac/0xc0 [295241.935778] nf_conntrack_tcp_packet+0x398/0xba0 [nf_conntrack] [295241.953030] nf_conntrack_in+0x498/0x5e0 [nf_conntrack] [295241.958344] __ovs_ct_lookup+0xac/0x860 [openvswitch] [295241.968532] ovs_ct_execute+0x4a7/0x7c0 [openvswitch] [295241.979167] do_execute_actions+0x54a/0xaa0 [openvswitch] [295242.001482] ovs_execute_actions+0x48/0x100 [openvswitch] [295242.006966] ovs_dp_process_packet+0x96/0x1d0 [openvswitch] [295242.012626] ovs_vport_receive+0x6c/0xc0 [openvswitch] [295242.028763] netdev_frame_hook+0xc0/0x180 [openvswitch] [295242.034074] __netif_receive_skb_core+0x2ca/0xcb0 [295242.047498] netif_receive_skb_internal+0x3e/0xc0 [295242.052291] napi_gro_receive+0xba/0xe0 [295242.056231] mlx5e_handle_rx_cqe_mpwrq_rep+0x12b/0x250 [mlx5_core] [295242.062513] mlx5e_poll_rx_cq+0xa0f/0xa30 [mlx5_core] [295242.067669] mlx5e_napi_poll+0xe1/0x6b0 [mlx5_core] [295242.077958] net_rx_action+0x149/0x3b0 [295242.086762] __do_softirq+0xd7/0x2d6 [295242.090427] irq_exit+0xf7/0x100 [295242.093748] do_IRQ+0x7f/0xd0 [295242.096806] common_interrupt+0xf/0xf [295242.100559] </IRQ> [295242.102750] RIP: 0033:0x7f9022e88cbd [295242.125246] RSP: 002b:00007f9022282b20 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffda [295242.132900] RAX: 0000000000000005 RBX: 0000000000000010 RCX: 0000000000000000 [295242.140120] RDX: 00007f9022282ba8 RSI: 00007f9022282a30 RDI: 00007f9014005c30 [295242.147337] RBP: 00007f9014014d60 R08: 0000000000000020 R09: 00007f90254a8340 [295242.154557] R10: 00007f9022282a28 R11: 0000000000000246 R12: 0000000000000000 [295242.161775] R13: 00007f902308c000 R14: 000000000000002b R15: 00007f9022b71f40 Fixes: 3fdbd1ce ("openvswitch: add ipv6 'set' action") Signed-off-by: Paul Blakey <paulb@nvidia.com> Link: https://lore.kernel.org/r/20220223163416.24096-1-paulb@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tao Liu authored
commit cc20cced upstream. We encounter a tcp drop issue in our cloud environment. Packet GROed in host forwards to a VM virtio_net nic with net_failover enabled. VM acts as a IPVS LB with ipip encapsulation. The full path like: host gro -> vm virtio_net rx -> net_failover rx -> ipvs fullnat -> ipip encap -> net_failover tx -> virtio_net tx When net_failover transmits a ipip pkt (gso_type = 0x0103, which means SKB_GSO_TCPV4, SKB_GSO_DODGY and SKB_GSO_IPXIP4), there is no gso did because it supports TSO and GSO_IPXIP4. But network_header points to inner ip header. Call Trace: tcp4_gso_segment ------> return NULL inet_gso_segment ------> inner iph, network_header points to ipip_gso_segment inet_gso_segment ------> outer iph skb_mac_gso_segment Afterwards virtio_net transmits the pkt, only inner ip header is modified. And the outer one just keeps unchanged. The pkt will be dropped in remote host. Call Trace: inet_gso_segment ------> inner iph, outer iph is skipped skb_mac_gso_segment __skb_gso_segment validate_xmit_skb validate_xmit_skb_list sch_direct_xmit __qdisc_run __dev_queue_xmit ------> virtio_net dev_hard_start_xmit __dev_queue_xmit ------> net_failover ip_finish_output2 ip_output iptunnel_xmit ip_tunnel_xmit ipip_tunnel_xmit ------> ipip dev_hard_start_xmit __dev_queue_xmit ip_finish_output2 ip_output ip_forward ip_rcv __netif_receive_skb_one_core netif_receive_skb_internal napi_gro_receive receive_buf virtnet_poll net_rx_action The root cause of this issue is specific with the rare combination of SKB_GSO_DODGY and a tunnel device that adds an SKB_GSO_ tunnel option. SKB_GSO_DODGY is set from external virtio_net. We need to reset network header when callbacks.gso_segment() returns NULL. This patch also includes ipv6_gso_segment(), considering SIT, etc. Fixes: cb32f511 ("ipip: add GSO/TSO support") Signed-off-by: Tao Liu <thomas.liu@ucloud.cn> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
commit a1f8fec4 upstream. These tests are supposed to check if the loop exited via a break or not. However the tests are wrong because if we did not exit via a break then "p" is not a valid pointer. In that case, it's the equivalent of "if (*(u32 *)sr == *last_key) {". That's going to work most of the time, but there is a potential for those to be equal. Fixes: 1593123a ("tipc: add name table dump to new netlink api") Fixes: 1a1a143d ("tipc: add publication dump to new netlink api") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
commit ef527f96 upstream. Whenever one of these functions pull all data from an skb in a frag_list, use consume_skb() instead of kfree_skb() to avoid polluting drop monitoring. Fixes: 6fa01ccd ("skbuff: Add pskb_extract() helper function") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220220154052.1308469-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Felix Maurer authored
commit 4a11678f upstream. If bpf_msg_push_data() is called with len 0 (as it happens during selftests/bpf/test_sockmap), we do not need to do anything and can return early. Calling bpf_msg_push_data() with len 0 previously lead to a wrong ENOMEM error: we later called get_order(copy + len); if len was 0, copy + len was also often 0 and get_order() returned some undefined value (at the moment 52). alloc_pages() caught that and failed, but then bpf_msg_push_data() returned ENOMEM. This was wrong because we are most probably not out of memory and actually do not need any additional memory. Fixes: 6fff607e ("bpf: sk_msg program helper bpf_msg_push_data") Signed-off-by: Felix Maurer <fmaurer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/df69012695c7094ccb1943ca02b4920db3537466.1644421921.git.fmaurer@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexey Bayduraev authored
commit 69560e36 upstream. When perf_data__create_dir() fails, it calls close_dir(), but perf_session__delete() also calls close_dir() and since dir.version and dir.nr were initialized by perf_data__create_dir(), a double free occurs. This patch moves the initialization of dir.version and dir.nr after successful initialization of dir.files, that prevents double freeing. This behavior is already implemented in perf_data__open_dir(). Fixes: 14552063 ("perf data: Add perf_data__(create_dir|close_dir) functions") Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Antonov <alexander.antonov@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Budankov <abudankov@huawei.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220218152341.5197-2-alexey.v.bayduraev@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xin Long authored
commit cd33bdcb upstream. As Jakub noticed, prints should be avoided on the datapath. Also, as packets would never come to the else branch in ping_lookup(), remove pr_err() from ping_lookup(). Fixes: 35a79e64 ("ping: fix the dif and sdif check in ping_lookup") Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/1ef3f2fcd31bd681a193b1fcf235eee1603819bd.1645674068.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Heiner Kallweit authored
commit ddb826c2 upstream. Usage of phy_ethtool_get_link_ksettings() in the link status change handler isn't needed, and in combination with the referenced change it results in a deadlock. Simply remove the call and replace it with direct access to phydev->speed. The duplex argument of lan743x_phy_update_flowcontrol() isn't used and can be removed. Fixes: c10a485c ("phy: phy_ethtool_ksettings_get: Lock the phy for consistency") Reported-by: Alessandro B Maurici <abmaurici@gmail.com> Tested-by: Alessandro B Maurici <abmaurici@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/40e27f76-0ba3-dcef-ee32-a78b9df38b0f@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> [dannf: adjust context] Signed-off-by: dann frazier <dann.frazier@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jens Wiklander authored
commit aceeafef upstream. Adds a driver private tee_context by moving the tee_context in struct optee_notif to struct optee. This tee_context was previously used when doing internal calls to secure world to deliver notification. The new driver internal tee_context is now also when allocating driver private shared memory. This decouples the shared memory object from its original tee_context. This is needed when the life time of such a memory allocation outlives the client tee_context. This patch fixes the problem described below: The addition of a shutdown hook by commit f25889f9 ("optee: fix tee out of memory failure seen during kexec reboot") introduced a kernel shutdown regression that can be triggered after running the OP-TEE xtest suites. Once the shutdown hook is called it is not possible to communicate any more with the supplicant process because the system is not scheduling task any longer. Thus if the optee driver shutdown path receives a supplicant RPC request from the OP-TEE we will deadlock the kernel's shutdown. Fixes: f25889f9 ("optee: fix tee out of memory failure seen during kexec reboot") Fixes: 217e0250 ("tee: use reference counting for tee_context") Reported-by: Lars Persson <larper@axis.com> Cc: stable@vger.kernel.org Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> [JW: backport to 5.4-stable + update commit message] Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jens Wiklander authored
commit 1e2c3ef0 upstream. Exports the two functions teedev_open() and teedev_close_context() in order to make it easier to create a driver internal struct tee_context. Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Brian Geffon authored
When eagerly switching PKRU in switch_fpu_finish() it checks that current is not a kernel thread as kernel threads will never use PKRU. It's possible that this_cpu_read_stable() on current_task (ie. get_current()) is returning an old cached value. To resolve this reference next_p directly rather than relying on current. As written it's possible when switching from a kernel thread to a userspace thread to observe a cached PF_KTHREAD flag and never restore the PKRU. And as a result this issue only occurs when switching from a kernel thread to a userspace thread, switching from a non kernel thread works perfectly fine because all that is considered in that situation are the flags from some other non kernel task and the next fpu is passed in to switch_fpu_finish(). This behavior only exists between 5.2 and 5.13 when it was fixed by a rewrite decoupling PKRU from xstate, in: commit 95443698 ("x86/fpu: Remove PKRU handling from switch_fpu_finish()") Unfortunately backporting the fix from 5.13 is probably not realistic as it's part of a 60+ patch series which rewrites most of the PKRU handling. Fixes: 0cecca9d ("x86/fpu: Eager switch PKRU state") Signed-off-by: Brian Geffon <bgeffon@google.com> Signed-off-by: Willis Kung <williskung@google.com> Tested-by: Willis Kung <williskung@google.com> Cc: <stable@vger.kernel.org> # v5.4.x Cc: <stable@vger.kernel.org> # v5.10.x Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pablo Neira Ayuso authored
commit b1a5983f upstream. immediate verdict expression needs to allocate one slot in the flow offload action array, however, immediate data expression does not need to do so. fwd and dup expression need to allocate one slot, this is missing. Add a new offload_action interface to report if this expression needs to allocate one slot in the flow offload action array. Fixes: be2861dc ("netfilter: nft_{fwd,dup}_netdev: add offload support") Reported-and-tested-by: Nick Gregory <Nick.Gregory@Sophos.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Oliver Neukum authored
commit 6605cc67 upstream. This SL-6000 says Direct Line, not Ethernet v2: added Reporter and Link Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: Ross Maynard <bids.7405@bigpond.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=215361 Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Oliver Neukum authored
commit e9da0b56 upstream. A malicious device can leak heap data to user space providing bogus frame lengths. Introduce a sanity check. Signed-off-by: Oliver Neukum <oneukum@suse.com> Reviewed-by: Grant Grundler <grundler@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Evan Quan authored
commit f626dd0f upstream. MMHUB PG needs to be disabled for Picasso for stability reasons. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Helge Deller authored
commit a9727983 upstream. Fix 3 bugs: a) emulate_stw() doesn't return the error code value, so faulting instructions are not reported and aborted. b) Tell emulate_ldw() to handle fldw_l as floating point instruction c) Tell emulate_ldw() to handle ldw_m as integer instruction Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Helge Deller authored
commit dd2288f4 upstream. Usually the kernel provides fixup routines to emulate the fldd and fstd floating-point instructions if they load or store 8-byte from/to a not natuarally aligned memory location. On a 32-bit kernel I noticed that those unaligned handlers didn't worked and instead the application got a SEGV. While checking the code I found two problems: First, the OPCODE_FLDD_L and OPCODE_FSTD_L cases were ifdef'ed out by the CONFIG_PA20 option, and as such those weren't built on a pure 32-bit kernel. This is now fixed by moving the CONFIG_PA20 #ifdef to prevent the compilation of OPCODE_LDD_L and OPCODE_FSTD_L only, and handling the fldd and fstd instructions. The second problem are two bugs in the 32-bit inline assembly code, where the wrong registers where used. The calculation of the natural alignment used %2 (vall) instead of %3 (ior), and the first word was stored back to address %1 (valh) instead of %3 (ior). Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stefano Garzarella authored
commit a58da53f upstream. vhost_vsock_stop() calls vhost_dev_check_owner() to check the device ownership. It expects current->mm to be valid. vhost_vsock_stop() is also called by vhost_vsock_dev_release() when the user has not done close(), so when we are in do_exit(). In this case current->mm is invalid and we're releasing the device, so we should clean it anyway. Let's check the owner only when vhost_vsock_stop() is called by an ioctl. When invoked from release we can not fail so we don't check return code of vhost_vsock_stop(). We need to stop vsock even if it's not the owner. Fixes: 433fc58e ("VSOCK: Introduce vhost_vsock.ko") Cc: stable@vger.kernel.org Reported-by: <syzbot+1e3ea63db39f2b4440e0@syzkaller.appspotmail.com> Reported-and-tested-by: <syzbot+3140b17cb44a7b174008@syzkaller.appspotmail.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Siarhei Volkau authored
commit 2f0754f2 upstream. The mmc0 clock gate bit was mistakenly assigned to "i2s" clock. You can find that the same bit is assigned to "mmc0" too. It leads to mmc0 hang for a long time after any sound activity also it prevented PM_SLEEP to work properly. I guess it was introduced by copy-paste from jz4740 driver where it is really controls I2S clock gate. Fixes: 226dfa47 ("clk: Add Ingenic jz4725b CGU driver") Signed-off-by: Siarhei Volkau <lis8215@gmail.com> Tested-by: Siarhei Volkau <lis8215@gmail.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220205171849.687805-2-lis8215@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Zhang Qiao authored
commit 05c7b7a9 upstream. As previously discussed(https://lkml.org/lkml/2022/1/20/51), cpuset_attach() is affected with similar cpu hotplug race, as follow scenario: cpuset_attach() cpu hotplug --------------------------- ---------------------- down_write(cpuset_rwsem) guarantee_online_cpus() // (load cpus_attach) sched_cpu_deactivate set_cpu_active() // will change cpu_active_mask set_cpus_allowed_ptr(cpus_attach) __set_cpus_allowed_ptr_locked() // (if the intersection of cpus_attach and cpu_active_mask is empty, will return -EINVAL) up_write(cpuset_rwsem) To avoid races such as described above, protect cpuset_attach() call with cpu_hotplug_lock. Fixes: be367d09 ("cgroups: let ss->can_attach and ss->attach do whole threadgroups at a time") Cc: stable@vger.kernel.org # v2.6.32+ Reported-by: Zhao Gongyi <zhaogongyi@huawei.com> Signed-off-by: Zhang Qiao <zhangqiao22@huawei.com> Acked-by: Waiman Long <longman@redhat.com> Reviewed-by: Michal Koutný <mkoutny@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- Feb 23, 2022
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20220221084915.554151737@linuxfoundation.org Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Slade Watkins <slade@sladewatkins.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Hulk Robot <hulkrobot@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jing Leng authored
[ Upstream commit 1b9e740a ] When the KCONFIG_AUTOCONFIG is specified (e.g. export \ KCONFIG_AUTOCONFIG=output/config/auto.conf), the directory of include/config/ will not be created, so kconfig can't create deps files in it and auto.conf can't be generated. Signed-off-by: Jing Leng <jleng@ambarella.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Marc St-Amand authored
[ Upstream commit 37f78606 ] Single page and coherent memory blocks can use different DMA masks when the macb accesses physical memory directly. The kernel is clever enough to allocate pages that fit into the requested address width. When using the ARM SMMU, the DMA mask must be the same for single pages and big coherent memory blocks. Otherwise the translation tables turn into one big mess. [ 74.959909] macb ff0e0000.ethernet eth0: DMA bus error: HRESP not OK [ 74.959989] arm-smmu fd800000.smmu: Unhandled context fault: fsr=0x402, iova=0x3165687460, fsynr=0x20001, cbfrsynra=0x877, cb=1 [ 75.173939] macb ff0e0000.ethernet eth0: DMA bus error: HRESP not OK [ 75.173955] arm-smmu fd800000.smmu: Unhandled context fault: fsr=0x402, iova=0x3165687460, fsynr=0x20001, cbfrsynra=0x877, cb=1 Since using the same DMA mask does not hurt direct 1:1 physical memory mappings, this commit always aligns DMA and coherent masks. Signed-off-by: Marc St-Amand <mstamand@ciena.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Slark Xiao authored
[ Upstream commit 8ecbb179 ] Dell DW5829e same as DW5821e except the CAT level. DW5821e supports CAT16 but DW5829e supports CAT9. Also, DW5829e includes normal and eSIM type. Please see below test evidence: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=413c ProdID=81e6 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=413c ProdID=81e4 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e-eSIM Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option Signed-off-by: Slark Xiao <slark_xiao@163.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20220209024717.8564-1-slark_xiao@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
JaeSang Yoo authored
[ Upstream commit 3203ce39 ] The kernel parameter "tp_printk_stop_on_boot" starts with "tp_printk" which is the same as another kernel parameter "tp_printk". If "tp_printk" setup is called before the "tp_printk_stop_on_boot", it will override the latter and keep it from being set. This is similar to other kernel parameter issues, such as: Commit 745a600c ("um: console: Ignore console= option") or init/do_mounts.c:45 (setup function of "ro" kernel param) Fix it by checking for a "_" right after the "tp_printk" and if that exists do not process the parameter. Link: https://lkml.kernel.org/r/20220208195421.969326-1-jsyoo5b@gmail.com Signed-off-by: JaeSang Yoo <jsyoo5b@gmail.com> [ Fixed up change log and added space after if condition ] Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Sascha Hauer authored
[ Upstream commit c0cfbb12 ] The driver returns an error when devm_phy_optional_get() fails leaving the previously enabled clock turned on. Change order and enable the clock only after the phy has been acquired. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220126145549.617165-3-s.hauer@pengutronix.de Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Zoltán Böszörményi authored
[ Upstream commit c8ea23d5 ] This device is a CF card, or possibly an SSD in CF form factor. It supports NCQ and high speed DMA. While it also advertises TRIM support, I/O errors are reported when the discard mount option fstrim is used. TRIM also fails when disabling NCQ and not just as an NCQ command. TRIM must be disabled for this device. Signed-off-by: Zoltán Böszörményi <zboszor@gmail.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Brenda Streiff authored
[ Upstream commit 8a4c5b2a ] The 'shell' built-in only returns the first 256 bytes of the command's output. In some cases, 'shell' is used to return a path; by bumping up the buffer size to 4096 this lets us capture up to PATH_MAX. The specific case where I ran into this was due to commit 1e860048 ("gcc-plugins: simplify GCC plugin-dev capability test"). After this change, we now use `$(shell,$(CC) -print-file-name=plugin)` to return a path; if the gcc path is particularly long, then the path ends up truncated at the 256 byte mark, which makes the HAVE_GCC_PLUGINS depends test always fail. Signed-off-by: Brenda Streiff <brenda.streiff@ni.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Christian Hewitt authored
[ Upstream commit f26573e2 ] The BL32/TEE reserved-memory region is now inherited from the common family dtsi (meson-g12-common) so we can drop it from board files. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220126044954.19069-4-christianshewitt@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Christian Hewitt authored
[ Upstream commit 08982a1b ] Add an additional reserved memory region for the BL32 trusted firmware present in many devices that boot from Amlogic vendor u-boot. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220126044954.19069-3-christianshewitt@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Christian Hewitt authored
[ Upstream commit 76577c91 ] Add an additional reserved memory region for the BL32 trusted firmware present in many devices that boot from Amlogic vendor u-boot. Suggested-by: Mateusz Krzak <kszaquitto@gmail.com> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220126044954.19069-2-christianshewitt@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Florian Westphal authored
[ Upstream commit 77b33719 ] Vivek Thrivikraman reported: An SCTP server application which is accessed continuously by client application. When the session disconnects the client retries to establish a connection. After restart of SCTP server application the session is not established because of stale conntrack entry with connection state CLOSED as below. (removing this entry manually established new connection): sctp 9 CLOSED src=10.141.189.233 [..] [ASSURED] Just skip timeout update of closed entries, we don't want them to stay around forever. Reported-and-tested-by: Vivek Thrivikraman <vivek.thrivikraman@est.tech> Closes: https://bugzilla.netfilter.org/show_bug.cgi?id=1579 Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Guo Ren authored
[ Upstream commit 1d4df649 ] The thead,c900-plic has been used in opensbi to distinguish PLIC [1]. Although PLICs have the same behaviors in Linux, they are different hardware with some custom initializing in firmware(opensbi). Qute opensbi patch commit-msg by Samuel: The T-HEAD PLIC implementation requires setting a delegation bit to allow access from S-mode. Now that the T-HEAD PLIC has its own compatible string, set this bit automatically from the PLIC driver, instead of reaching into the PLIC's MMIO space from another driver. [1]: https://github.com/riscv-software-src/opensbi/commit/78c2b19218bd62653b9fb31623a42ced45f38ea6 Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Cc: Anup Patel <anup@brainfault.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Samuel Holland <samuel@sholland.org> Cc: Thomas Gleixner <tglx@linutronix.de> Tested-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220130135634.1213301-3-guoren@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Ye Guojin authored
[ Upstream commit 34596ba3 ] This was found by coccicheck: ./arch/arm/mach-omap2/display.c, 272, 1-7, ERROR missing put_device; call of_find_device_by_node on line 258, but without a corresponding object release within this function. Move the put_device() call before the if judgment. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Ye Guojin <ye.guojin@zte.com.cn> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Wan Jiabing authored
[ Upstream commit 80c469a0 ] Fix following coccicheck warning: ./arch/arm/mach-omap2/omap_hwmod.c:753:1-23: WARNING: Function for_each_matching_node should have of_node_put() before break Early exits from for_each_matching_node should decrement the node reference counter. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jim Mattson authored
[ Upstream commit 710c4765 ] AMD's event select is 3 nybbles, with the high nybble in bits 35:32 of a PerfEvtSeln MSR. Don't mask off the high nybble when configuring a RAW perf event. Fixes: ca724305 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM") Signed-off-by: Jim Mattson <jmattson@google.com> Message-Id: <20220203014813.2130559-2-jmattson@google.com> Reviewed-by: David Dunn <daviddunn@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Miaoqian Lin authored
[ Upstream commit 8bc69f86 ] kobject_init_and_add() takes reference even when it fails. According to the doc of kobject_init_and_add(): If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Fix memory leak by calling kobject_put(). Fixes: c2e5df61 ("vmbus: add per-channel sysfs info") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Juan Vazquez <juvazq@linux.microsoft.com> Link: https://lore.kernel.org/r/20220203173008.43480-1-linmq006@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Rafał Miłecki authored
commit 834cea3a upstream. DSL and CM (Cable Modem) support 8 B max transfer size and have a custom DT binding for that reason. This driver was checking for a wrong "compatible" however which resulted in an incorrect setup. Fixes: e2e5a2c6 ("i2c: brcmstb: Adding support for CM and DSL SoCs") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Waiman Long authored
commit ddc204b5 upstream. I was made aware of the following lockdep splat: [ 2516.308763] ===================================================== [ 2516.309085] WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected [ 2516.309433] 5.14.0-51.el9.aarch64+debug #1 Not tainted [ 2516.309703] ----------------------------------------------------- [ 2516.310149] stress-ng/153663 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 2516.310512] ffff0000e422b198 (&newf->file_lock){+.+.}-{2:2}, at: fd_install+0x368/0x4f0 [ 2516.310944] and this task is already holding: [ 2516.311248] ffff0000c08140d8 (&sighand->siglock){-.-.}-{2:2}, at: copy_process+0x1e2c/0x3e80 [ 2516.311804] which would create a new lock dependency: [ 2516.312066] (&sighand->siglock){-.-.}-{2:2} -> (&newf->file_lock){+.+.}-{2:2} [ 2516.312446] but this new dependency connects a HARDIRQ-irq-safe lock: [ 2516.312983] (&sighand->siglock){-.-.}-{2:2} : [ 2516.330700] Possible interrupt unsafe locking scenario: [ 2516.331075] CPU0 CPU1 [ 2516.331328] ---- ---- [ 2516.331580] lock(&newf->file_lock); [ 2516.331790] local_irq_disable(); [ 2516.332231] lock(&sighand->siglock); [ 2516.332579] lock(&newf->file_lock); [ 2516.332922] <Interrupt> [ 2516.333069] lock(&sighand->siglock); [ 2516.333291] *** DEADLOCK *** [ 2516.389845] stack backtrace: [ 2516.390101] CPU: 3 PID: 153663 Comm: stress-ng Kdump: loaded Not tainted 5.14.0-51.el9.aarch64+debug #1 [ 2516.390756] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 2516.391155] Call trace: [ 2516.391302] dump_backtrace+0x0/0x3e0 [ 2516.391518] show_stack+0x24/0x30 [ 2516.391717] dump_stack_lvl+0x9c/0xd8 [ 2516.391938] dump_stack+0x1c/0x38 [ 2516.392247] print_bad_irq_dependency+0x620/0x710 [ 2516.392525] check_irq_usage+0x4fc/0x86c [ 2516.392756] check_prev_add+0x180/0x1d90 [ 2516.392988] validate_chain+0x8e0/0xee0 [ 2516.393215] __lock_acquire+0x97c/0x1e40 [ 2516.393449] lock_acquire.part.0+0x240/0x570 [ 2516.393814] lock_acquire+0x90/0xb4 [ 2516.394021] _raw_spin_lock+0xe8/0x154 [ 2516.394244] fd_install+0x368/0x4f0 [ 2516.394451] copy_process+0x1f5c/0x3e80 [ 2516.394678] kernel_clone+0x134/0x660 [ 2516.394895] __do_sys_clone3+0x130/0x1f4 [ 2516.395128] __arm64_sys_clone3+0x5c/0x7c [ 2516.395478] invoke_syscall.constprop.0+0x78/0x1f0 [ 2516.395762] el0_svc_common.constprop.0+0x22c/0x2c4 [ 2516.396050] do_el0_svc+0xb0/0x10c [ 2516.396252] el0_svc+0x24/0x34 [ 2516.396436] el0t_64_sync_handler+0xa4/0x12c [ 2516.396688] el0t_64_sync+0x198/0x19c [ 2517.491197] NET: Registered PF_ATMPVC protocol family [ 2517.491524] NET: Registered PF_ATMSVC protocol family [ 2591.991877] sched: RT throttling activated One way to solve this problem is to move the fd_install() call out of the sighand->siglock critical section. Before commit 6fd2fe49 ("copy_process(): don't use ksys_close() on cleanups"), the pidfd installation was done without holding both the task_list lock and the sighand->siglock. Obviously, holding these two locks are not really needed to protect the fd_install() call. So move the fd_install() call down to after the releases of both locks. Link: https://lore.kernel.org/r/20220208163912.1084752-1-longman@redhat.com Fixes: 6fd2fe49 ("copy_process(): don't use ksys_close() on cleanups") Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-