- Dec 08, 2021
-
-
Mingjie Zhang authoredcommit 88459e3e upstream. Update the USB serial option driver support for the Fibocom FM101-GL Cat.6 LTE modules as there are actually several different variants. - VID:PID 2cb7:01a2, FM101-GL are laptop M.2 cards (with MBIM interfaces for /Linux/Chrome OS) - VID:PID 2cb7:01a4, FM101-GL for laptop debug M.2 cards(with adb interface for /Linux/Chrome OS) 0x01a2: mbim, tty, tty, diag, gnss 0x01a4: mbim, diag, tty, adb, gnss, gnss Here are the outputs of lsusb -v and usb-devices: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 86 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=01a2 Rev= 5.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=Fibocom FM101-GL Module S: SerialNumber=673326ce C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none) I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none) I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none) Bus 002 Device 084: ID 2cb7:01a2 Fibocom Wireless Inc. Fibocom FM101-GL Module Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.20 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x2cb7 idProduct 0x01a2 bcdDevice 5.04 iManufacturer 1 Fibocom Wireless Inc. iProduct 2 Fibocom FM101-GL Module iSerial 3 673326ce bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x015d bNumInterfaces 6 bConfigurationValue 1 iConfiguration 4 MBIM_DUN_DUN_DIAG_NMEA bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 896mA Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 0 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 14 bFunctionProtocol 0 iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 14 bInterfaceProtocol 0 iInterface 5 Fibocom FM101-GL LTE Modem CDC Header: bcdCDC 1.10 CDC Union: bMasterInterface 0 bSlaveInterface 1 CDC MBIM: bcdMBIMVersion 1.00 wMaxControlMessage 4096 bNumberFilters 32 bMaxFilterSize 128 wMaxSegmentSize 2048 bmNetworkCapabilities 0x20 8-byte ntb input size CDC MBIM Extended: bcdMBIMExtendedVersion 1.00 bMaxOutstandingCommandMessages 64 wMTU 1500 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 9 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 2 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 2 iInterface 6 MBIM Data Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8e EP 14 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 6 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x0f EP 15 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 2 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 64 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 64 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 48 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 5 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 64 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 85 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=01a4 Rev= 5.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=Fibocom FM101-GL Module S: SerialNumber=673326ce C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=896mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none) I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none) I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none) Bus 002 Device 085: ID 2cb7:01a4 Fibocom Wireless Inc. Fibocom FM101-GL Module Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.20 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x2cb7 idProduct 0x01a4 bcdDevice 5.04 iManufacturer 1 Fibocom Wireless Inc. iProduct 2 Fibocom FM101-GL Module iSerial 3 673326ce bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0180 bNumInterfaces 7 bConfigurationValue 1 iConfiguration 4 MBIM_DIAG_DUN_ADB_GNSS_GNSS bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 896mA Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 0 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 14 bFunctionProtocol 0 iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 14 bInterfaceProtocol 0 iInterface 5 Fibocom FM101-GL LTE Modem CDC Header: bcdCDC 1.10 CDC Union: bMasterInterface 0 bSlaveInterface 1 CDC MBIM: bcdMBIMVersion 1.00 wMaxControlMessage 4096 bNumberFilters 32 bMaxFilterSize 128 wMaxSegmentSize 2048 bmNetworkCapabilities 0x20 8-byte ntb input size CDC MBIM Extended: bcdMBIMExtendedVersion 1.00 bMaxOutstandingCommandMessages 64 wMTU 1500 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 9 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 2 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 2 iInterface 6 MBIM Data Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8e EP 14 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 6 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x0f EP 15 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 2 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 48 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 64 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 66 bInterfaceProtocol 1 iInterface 8 ADB Interface Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 5 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 64 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 6 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 64 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x89 EP 9 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Signed-off-by:
Mingjie Zhang <superzmj@fibocom.com>
Link: https://lore.kernel.org/r/20211123133757.37475-1-superzmj@fibocom.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Daniele Palmas authored
commit e353f3e8 upstream. Add the following Telit LE910S1 composition: 0x9200: tty Signed-off-by:
Daniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20211119140319.10448-1-dnlplm@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Lee Jones authored
Supply additional checks in order to prevent unexpected results. Fixes: b892bf75 ("ion: Switch ion to use dma-buf") Suggested-by:
Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- Nov 26, 2021
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20211124115703.941380739@linuxfoundation.org Tested-by:
Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20211125125641.226524689@linuxfoundation.org
Link: https://lore.kernel.org/r/20211125160515.184659981@linuxfoundation.org
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Dmitry Osipenko authored
commit 19221e30 upstream. The tegra_powergate_power_up() has a typo in the error code path where it will try to disable clocks twice, fix it. In practice that error never happens, so this is a minor correction. Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30 Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20 and TK1 T124 Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 Signed-off-by:
Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Uwe Kleine-König authored
commit fc153aba upstream. Instead of maintaining a single-linked list of devices that must be searched linearly in .remove() just use spi_set_drvdata() to remember the link between the spi device and the driver struct. Then the global list and the next member can be dropped. This simplifies the driver, reduces the memory footprint and the time to search the list. Also it makes obvious that there is always a corresponding driver struct for a given device in .remove(), so the error path for !max3421_hcd can be dropped, too. As a side effect this fixes a data inconsistency when .probe() races with itself for a second max3421 device in manipulating max3421_hcd_list. A similar race is fixed in .remove(), too. Fixes: 2d53139f ("Add support for using a MAX3421E chip as a host driver.") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20211018204028.2914597-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Takashi Iwai authored
commit 827b0913 upstream. The recent fix for DAPM to correct the kctl change notification by the commit 5af82c81 ("ASoC: DAPM: Fix missing kctl change notifications") caused other regressions since it changed the behavior of snd_soc_dapm_set_pin() that is called from several API functions. Formerly it returned always 0 for success, but now it returns 0 or 1. This patch addresses it, restoring the old behavior of snd_soc_dapm_set_pin() while keeping the fix in snd_soc_dapm_put_pin_switch(). Fixes: 5af82c81 ("ASoC: DAPM: Fix missing kctl change notifications") Reported-by:
Yu-Hsuan Hsu <yuhsuan@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20211105090925.20575-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Sven Eckelmann authored
commit 992b03b8 upstream. When a packet is fragmented by batman-adv, the original batman-adv header is not modified. Only a new fragmentation is inserted between the original one and the ethernet header. The code must therefore make sure that it has a writable region of this size in the skbuff head. But it is not useful to always reallocate the skbuff by this size even when there would be more than enough headroom still in the skb. The reallocation is just to costly during in this codepath. Fixes: ee75ed88 ("batman-adv: Fragment and send skbs larger than mtu") Signed-off-by:
Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
[ bp: 4.9 backported: adjust context. ]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Sven Eckelmann authored
commit c5cbfc87 upstream. The batadv net_device is trying to propagate the needed_headroom and needed_tailroom from the lower devices. This is needed to avoid cost intensive reallocations using pskb_expand_head during the transmission. But the fragmentation code split the skb's without adding extra room at the end/beginning of the various fragments. This reduced the performance of transmissions over complex scenarios (batadv on vxlan on wireguard) because the lower devices had to perform the reallocations at least once. Fixes: ee75ed88 ("batman-adv: Fragment and send skbs larger than mtu") Signed-off-by:
Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
[ bp: 4.9 backported: adjust context. ]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Sven Eckelmann authored
commit 4ca23e2c upstream. If a batman-adv packets has to be fragmented, then the original batman-adv packet header is not stripped away. Instead, only a new header is added in front of the packet after it was split. This size must be considered to avoid cost intensive reallocations during the transmission through the various device layers. Fixes: 7bca68c7 ("batman-adv: Add lower layer needed_(head|tail)room to own ones") Reported-by:
Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Linus Lüssing authored
commit 2369e827 upstream. Scenario: * Multicast frame send from BLA backbone gateways (multiple nodes with their bat0 bridged together, with BLA enabled) sharing the same LAN to nodes in the mesh Issue: * Nodes receive the frame multiple times on bat0 from the mesh, once from each foreign BLA backbone gateway which shares the same LAN with another For multicast frames via batman-adv broadcast packets coming from the same BLA backbone but from different backbone gateways duplicates are currently detected via a CRC history of previously received packets. However this CRC so far was not performed for multicast frames received via batman-adv unicast packets. Fixing this by appyling the same check for such packets, too. Room for improvements in the future: Ideally we would introduce the possibility to not only claim a client, but a complete originator, too. This would allow us to only send a multicast-in-unicast packet from a BLA backbone gateway claiming the node and by that avoid potential redundant transmissions in the first place. Fixes: e5cf86d30a9b ("batman-adv: add broadcast duplicate check") Signed-off-by:
Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
[ bp: 4.9 backported: adjust context, correct fixes line ]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Linus Lüssing authored
commit 3236d215 upstream. Scenario: * Multicast frame send from a BLA backbone (multiple nodes with their bat0 bridged together, with BLA enabled) Issue: * BLA backbone nodes receive the frame multiple times on bat0 For multicast frames received via batman-adv broadcast packets the originator of the broadcast packet is checked before decapsulating and forwarding the frame to bat0 (batadv_bla_is_backbone_gw()-> batadv_recv_bcast_packet()). If it came from a node which shares the same BLA backbone with us then it is not forwarded to bat0 to avoid a loop. When sending a multicast frame in a non-4-address batman-adv unicast packet we are currently missing this check - and cannot do so because the batman-adv unicast packet has no originator address field. However, we can simply fix this on the sender side by only sending the multicast frame via unicasts to interested nodes which do not share the same BLA backbone with us. This also nicely avoids some unnecessary transmissions on mesh side. Note that no infinite loop was observed, probably because of dropping via batadv_interface_tx()->batadv_bla_tx(). However the duplicates still utterly confuse switches/bridges, ICMPv6 duplicate address detection and neighbor discovery and therefore leads to long delays before being able to establish TCP connections, for instance. And it also leads to the Linux bridge printing messages like: "br-lan: received packet on eth1 with own address as source address ..." Fixes: fe2da6ff ("batman-adv: Modified forwarding behaviour for multicast packets") Signed-off-by:
Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
[ bp: 4.9 backport: drop usage in non-existing batadv_mcast_forw_*. ]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Linus Lüssing authored
commit d8bf0c01 upstream. The own OGM check is currently misplaced and can lead to the following issues: For one thing we might receive an aggregated OGM from a neighbor node which has our own OGM in the first place. We would then not only skip our own OGM but erroneously also any other, following OGM in the aggregate. For another, we might receive an OGM aggregate which has our own OGM in a place other then the first one. Then we would wrongly not skip this OGM, leading to populating the orginator and gateway table with ourself. Fixes: 9323158e ("batman-adv: OGMv2 - implement originators logic") Signed-off-by:
Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
[ bp: 4.9 backported: adjust context, correct fixes line ]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Sven Eckelmann authored
commit 1c2bcc76 upstream. The batman-adv fragmentation packets have the design problem that they cannot be refragmented and cannot handle padding by the underlying link. The latter often leads to problems when networks are incorrectly configured and don't use a common MTU. The sender could for example fragment a 1271 byte frame (plus external ethernet header (14) and batadv unicast header (10)) to fit in a 1280 bytes large MTU of the underlying link (max. 1294 byte frames). This would create a 1294 bytes large frame (fragment 2) and a 55 bytes large frame (fragment 1). The extra 54 bytes are the fragment header (20) added to each fragment and the external ethernet header (14) for the second fragment. Let us assume that the next hop is then not able to transport 1294 bytes to its next hop. The 1294 byte large frame will be dropped but the 55 bytes large fragment will still be forwarded to its destination. Or let us assume that the underlying hardware requires that each frame has a minimum size (e.g. 60 bytes). Then it will pad the 55 bytes frame to 60 bytes. The receiver of the 60 bytes frame will no longer be able to correctly assemble the two frames together because it is not aware that 5 bytes of the 60 bytes frame are padding and don't belong to the reassembled frame. This can partly be avoided by splitting frames more equally. In this example, the 675 and 674 bytes large fragment frames could both potentially reach its destination without being too large or too small. Reported-by:
Martin Weinelt <martin@darmstadt.freifunk.net>
Fixes: ee75ed88
("batman-adv: Fragment and send skbs larger than mtu")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
[ bp: 4.9 backported: adjust context. ]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
hongao authored
commit bf552083 upstream. amdgpu_connector_vga_get_modes missed function amdgpu_get_native_mode which assign amdgpu_encoder->native_mode with *preferred_mode result in amdgpu_encoder->native_mode.clock always be 0. That will cause amdgpu_connector_set_property returned early on: if ((rmx_type != DRM_MODE_SCALE_NONE) && (amdgpu_encoder->native_mode.clock == 0)) when we try to set scaling mode Full/Full aspect/Center. Add the missing function to amdgpu_connector_vga_get_mode can fix this. It also works on dvi connectors because amdgpu_connector_dvi_helper_funcs.get_mode use the same method. Signed-off-by:
hongao <hongao@uniontech.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Johan Hovold authored
commit 5591c8f7 upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 5320918b ("drm/udl: initial UDL driver (v4)") Cc: stable@vger.kernel.org # 3.4 Signed-off-by:
Johan Hovold <johan@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025115353.5089-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Nguyen Dinh Phi authored
commit 563fbefe upstream. If the userspace tools switch from NL80211_IFTYPE_P2P_GO to NL80211_IFTYPE_ADHOC via send_msg(NL80211_CMD_SET_INTERFACE), it does not call the cleanup cfg80211_stop_ap(), this leads to the initialization of in-use data. For example, this path re-init the sdata->assigned_chanctx_list while it is still an element of assigned_vifs list, and makes that linked list corrupt. Signed-off-by:
Nguyen Dinh Phi <phind.uet@gmail.com>
Reported-by: <syzbot+bbf402b783eeb6d908db@syzkaller.appspotmail.com>
Link: https://lore.kernel.org/r/20211027173722.777287-1-phind.uet@gmail.com
Cc: stable@vger.kernel.org
Fixes: ac800140
("cfg80211: .stop_ap when interface is going down")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Sven Schnelle authored
commit bec05f33 upstream. sticon_build_attr() checked the reverse argument and flipped background and foreground color, but returned the non-reverse value afterwards. Fix this and also add two local variables for foreground and background color to make the code easier to read. Signed-off-by:
Sven Schnelle <svens@stackframe.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Nikolay Borisov authored
commit 45da9c17 upstream. Ordered work functions aren't guaranteed to be handled by the same thread which executed the normal work functions. The only way execution between normal/ordered functions is synchronized is via the WORK_DONE_BIT, unfortunately the used bitops don't guarantee any ordering whatsoever. This manifested as seemingly inexplicable crashes on ARM64, where async_chunk::inode is seen as non-null in async_cow_submit which causes submit_compressed_extents to be called and crash occurs because async_chunk::inode suddenly became NULL. The call trace was similar to: pc : submit_compressed_extents+0x38/0x3d0 lr : async_cow_submit+0x50/0xd0 sp : ffff800015d4bc20 <registers omitted for brevity> Call trace: submit_compressed_extents+0x38/0x3d0 async_cow_submit+0x50/0xd0 run_ordered_work+0xc8/0x280 btrfs_work_helper+0x98/0x250 process_one_work+0x1f0/0x4ac worker_thread+0x188/0x504 kthread+0x110/0x114 ret_from_fork+0x10/0x18 Fix this by adding respective barrier calls which ensure that all accesses preceding setting of WORK_DONE_BIT are strictly ordered before setting the flag. At the same time add a read barrier after reading of WORK_DONE_BIT in run_ordered_work which ensures all subsequent loads would be strictly ordered after reading the bit. This in turn ensures are all accesses before WORK_DONE_BIT are going to be strictly ordered before any access that can occur in ordered_func. Reported-by:
Chris Murphy <lists@colorremedies.com>
Fixes: 08a9ff32 ("btrfs: Added btrfs_workqueue_struct implemented ordered execution based on kernel workqueue")
CC: stable@vger.kernel.org # 4.4+
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2011928
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Chris Murphy <chris@colorremedies.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Rustam Kovhaev authored
commit 34dbc3aa upstream. When kmemleak is enabled for SLOB, system does not boot and does not print anything to the console. At the very early stage in the boot process we hit infinite recursion from kmemleak_init() and eventually kernel crashes. kmemleak_init() specifies SLAB_NOLEAKTRACE for KMEM_CACHE(), but kmem_cache_create_usercopy() removes it because CACHE_CREATE_MASK is not valid for SLOB. Let's fix CACHE_CREATE_MASK and make kmemleak work with SLOB Link: https://lkml.kernel.org/r/20211115020850.3154366-1-rkovhaev@gmail.com Fixes: d8843922 ("slab: Ignore internal flags in cache creation") Signed-off-by:
Rustam Kovhaev <rkovhaev@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Glauber Costa <glommer@parallels.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Nathan Chancellor authored
commit ffb92ce8 upstream. Patch series "Fixes for ARCH=hexagon allmodconfig", v2. This series fixes some issues noticed with ARCH=hexagon allmodconfig. This patch (of 3): When building ARCH=hexagon allmodconfig, the following errors occur: ERROR: modpost: "__raw_readsl" [drivers/i3c/master/svc-i3c-master.ko] undefined! ERROR: modpost: "__raw_writesl" [drivers/i3c/master/dw-i3c-master.ko] undefined! ERROR: modpost: "__raw_readsl" [drivers/i3c/master/dw-i3c-master.ko] undefined! ERROR: modpost: "__raw_writesl" [drivers/i3c/master/i3c-master-cdns.ko] undefined! ERROR: modpost: "__raw_readsl" [drivers/i3c/master/i3c-master-cdns.ko] undefined! Export these symbols so that modules can use them without any errors. Link: https://lkml.kernel.org/r/20211115174250.1994179-1-nathan@kernel.org Link: https://lkml.kernel.org/r/20211115174250.1994179-2-nathan@kernel.org Fixes: 013bf24c ("Hexagon: Provide basic implementation and/or stubs for I/O routines.") Signed-off-by:
Nathan Chancellor <nathan@kernel.org>
Acked-by: Brian Cain <bcain@codeaurora.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Nicolas Dichtel authored
commit a31d27fb upstream. As stated in the bonding doc, trans_start must be set manually for drivers using NETIF_F_LLTX: Drivers that use NETIF_F_LLTX flag must also update netdev_queue->trans_start. If they do not, then the ARP monitor will immediately fail any slaves using that driver, and those slaves will stay down. Link: https://www.kernel.org/doc/html/v5.15/networking/bonding.html#arp-monitor-operation Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Alexander Antonov authored
[ Upstream commit 3866ae31 ] According to the latest uncore document, COMP_BUF_OCCUPANCY (0xd5) event can be collected on 2-3 counters. Update uncore IIO event constraints for Skylake Server. Fixes: cd34cd97 ("perf/x86/intel/uncore: Add Skylake server uncore support") Signed-off-by:
Alexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20211115090334.3789-3-alexander.antonov@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Alexander Antonov authored
[ Upstream commit e324234e ] According Uncore Reference Manual: any of the CHA events may be filtered by Thread/Core-ID by using tid modifier in CHA Filter 0 Register. Update skx_cha_hw_config() to follow Uncore Guide. Fixes: cd34cd97 ("perf/x86/intel/uncore: Add Skylake server uncore support") Signed-off-by:
Alexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20211115090334.3789-2-alexander.antonov@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Lin Ma authored
[ Upstream commit 3e3b5dfc ] There is a potential UAF between the unregistration routine and the NFC netlink operations. The race that cause that UAF can be shown as below: (FREE) | (USE) nfcmrvl_nci_unregister_dev | nfc_genl_dev_up nci_close_device | nci_unregister_device | nfc_get_device nfc_unregister_device | nfc_dev_up rfkill_destory | device_del | rfkill_blocked ... | ... The root cause for this race is concluded below: 1. The rfkill_blocked (USE) in nfc_dev_up is supposed to be placed after the device_is_registered check. 2. Since the netlink operations are possible just after the device_add in nfc_register_device, the nfc_dev_up() can happen anywhere during the rfkill creation process, which leads to data race. This patch reorder these actions to permit 1. Once device_del is finished, the nfc_dev_up cannot dereference the rfkill object. 2. The rfkill_register need to be placed after the device_add of nfc_dev because the parent device need to be created first. So this patch keeps the order but inject device_lock to prevent the data race. Signed-off-by:
Lin Ma <linma@zju.edu.cn>
Fixes: be055b2f
("NFC: RFKILL support")
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211116152652.19217-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Lin Ma authored
[ Upstream commit 86cdf8e3 ] There is a possible data race as shown below: thread-A in nci_request() | thread-B in nci_close_device() | mutex_lock(&ndev->req_lock); test_bit(NCI_UP, &ndev->flags); | ... | test_and_clear_bit(NCI_UP, &ndev->flags) mutex_lock(&ndev->req_lock); | | This race will allow __nci_request() to be awaked while the device is getting removed. Similar to commit e2cb6b89 ("bluetooth: eliminate the potential race condition when removing the HCI controller"). this patch alters the function sequence in nci_request() to prevent the data races between the nci_close_device(). Signed-off-by:
Lin Ma <linma@zju.edu.cn>
Fixes: 6a2968aa ("NFC: basic NCI protocol implementation")
Link: https://lore.kernel.org/r/20211115145600.8320-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Christophe JAILLET authored
[ Upstream commit c961a7d2 ] If 'led_classdev_register()' fails, some additional resources should be released. Add the missing 'i8042_remove_filter()' and 'lis3lv02d_remove_fs()' calls that are already in the remove function but are missing here. Fixes: a4c724d0 ("platform: hp_accel: add a i8042 filter to remove HPQ6000 data from kb bus stream") Fixes: 9e0c7978 ("lis3lv02d: merge with leds hp disk") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/5a4f218f8f16d2e3a7906b7ca3654ffa946895f8.1636314074.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Randy Dunlap authored
[ Upstream commit e8f67482 ] BCM63XX selects HAVE_LEGACY_CLK but does not provide/support clk_get_parent(), so add a simple implementation of that function so that callers of it will build without errors. Fixes these build errors: mips-linux-ld: drivers/iio/adc/ingenic-adc.o: in function `jz4770_adc_init_clk_div': ingenic-adc.c:(.text+0xe4): undefined reference to `clk_get_parent' mips-linux-ld: drivers/iio/adc/ingenic-adc.o: in function `jz4725b_adc_init_clk_div': ingenic-adc.c:(.text+0x1b8): undefined reference to `clk_get_parent' Fixes: e7300d04 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs." ) Signed-off-by:
Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Artur Rojek <contact@artur-rojek.eu>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: linux-mips@vger.kernel.org
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-iio@vger.kernel.org
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Surabhi Boob authored
[ Upstream commit 321421b5 ] While issuing VF Reset from the guest OS, the VF driver prints logs about critical / Overflow error detection. This is not an actual error since the VF_MBX_ARQLEN register is set to all FF's for a short period of time and the VF would catch the bits set if it was reading the register during that spike of time. This patch introduces an additional check to ignore this condition since the VF is in reset. Fixes: 19b73d8e ("i40evf: Add additional check for reset") Signed-off-by:
Surabhi Boob <surabhi.boob@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Pavel Skripkin authored
[ Upstream commit f8885ac8 ] Smatch says: bnx2x_init_ops.h:640 bnx2x_ilt_client_mem_op() warn: variable dereferenced before check 'ilt' (see line 638) Move ilt_cli variable initialization _after_ ilt validation, because it's unsafe to deref the pointer before validation check. Fixes: 523224a3 ("bnx2x, cnic, bnx2i: use new FW/HSI") Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Vincent Donnefort authored
[ Upstream commit 42dc938a ] Nothing protects the access to the per_cpu variable sd_llc_id. When testing the same CPU (i.e. this_cpu == that_cpu), a race condition exists with update_top_cache_domain(). One scenario being: CPU1 CPU2 ================================================================== per_cpu(sd_llc_id, CPUX) => 0 partition_sched_domains_locked() detach_destroy_domains() cpus_share_cache(CPUX, CPUX) update_top_cache_domain(CPUX) per_cpu(sd_llc_id, CPUX) => 0 per_cpu(sd_llc_id, CPUX) = CPUX per_cpu(sd_llc_id, CPUX) => CPUX return false ttwu_queue_cond() wouldn't catch smp_processor_id() == cpu and the result is a warning triggered from ttwu_queue_wakelist(). Avoid a such race in cpus_share_cache() by always returning true when this_cpu == that_cpu. Fixes: 518cd623 ("sched: Only queue remote wakeups when crossing cache boundaries") Reported-by:
Jing-Ting Wu <jing-ting.wu@mediatek.com>
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20211104175120.857087-1-vincent.donnefort@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Randy Dunlap authored
[ Upstream commit 5eeaafc8 ] Several header files need info on CONFIG_32BIT or CONFIG_64BIT, but kconfig symbol BCM63XX does not provide that info. This leads to many build errors, e.g.: arch/mips/include/asm/page.h:196:13: error: use of undeclared identifier 'CAC_BASE' return x - PAGE_OFFSET + PHYS_OFFSET; arch/mips/include/asm/mach-generic/spaces.h:91:23: note: expanded from macro 'PAGE_OFFSET' #define PAGE_OFFSET (CAC_BASE + PHYS_OFFSET) arch/mips/include/asm/io.h:134:28: error: use of undeclared identifier 'CAC_BASE' return (void *)(address + PAGE_OFFSET - PHYS_OFFSET); arch/mips/include/asm/mach-generic/spaces.h:91:23: note: expanded from macro 'PAGE_OFFSET' #define PAGE_OFFSET (CAC_BASE + PHYS_OFFSET) arch/mips/include/asm/uaccess.h:82:10: error: use of undeclared identifier '__UA_LIMIT' return (__UA_LIMIT & (addr | (addr + size) | __ua_size(size))) == 0; Selecting the SYS_HAS_CPU_BMIPS* symbols causes SYS_HAS_CPU_BMIPS to be set, which then selects CPU_SUPPORT_32BIT_KERNEL, which causes CONFIG_32BIT to be set. (a bit more indirect than v1 [RFC].) Fixes: e7300d04 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs.") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-mips@vger.kernel.org
Cc: Paul Burton <paulburton@kernel.org>
Cc: Maxime Bizon <mbizon@freebox.fr>
Cc: Ralf Baechle <ralf@linux-mips.org>
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Randy Dunlap authored
[ Upstream commit b929926f ] Fix this by defining both ENDIAN macros in <asm/sfp-machine.h> so that they can be utilized in <math-emu/soft-fp.h> according to the latter's comment: /* Allow sfp-machine to have its own byte order definitions. */ (This is what is done in arch/nds32/include/asm/sfp-machine.h.) This placates these build warnings: In file included from ../arch/sh/math-emu/math.c:23: .../include/math-emu/single.h:50:21: warning: "__BIG_ENDIAN" is not defined, evaluates to 0 [-Wundef] 50 | #if __BYTE_ORDER == __BIG_ENDIAN In file included from ../arch/sh/math-emu/math.c:24: .../include/math-emu/double.h:59:21: warning: "__BIG_ENDIAN" is not defined, evaluates to 0 [-Wundef] 59 | #if __BYTE_ORDER == __BIG_ENDIAN Fixes: 4b565680 ("sh: math-emu support") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Randy Dunlap authored
[ Upstream commit fda1bc53 ] FRAME_POINTER depends on DEBUG_KERNEL so DWARF_UNWINDER should depend on DEBUG_KERNEL before selecting FRAME_POINTER. WARNING: unmet direct dependencies detected for FRAME_POINTER Depends on [n]: DEBUG_KERNEL [=n] && (M68K || UML || SUPERH [=y]) || ARCH_WANT_FRAME_POINTERS [=n] Selected by [y]: - DWARF_UNWINDER [=y] Fixes: bd353861 ("sh: dwarf unwinder support.") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org>
Cc: Matt Fleming <matt@console-pimps.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Lu Wei authored
[ Upstream commit bde82ee3 ] If KMEM_CACHE or maple_alloc_dev failed, the maple_bus_init() will return 0 rather than error, because the retval is not changed after KMEM_CACHE or maple_alloc_dev failed. Fixes: 17be2d2b ("sh: Add maple bus support for the SEGA Dreamcast.") Reported-by:
Hulk Robot <hulkci@huawei.com>
Signed-off-by: Lu Wei <luwei32@huawei.com>
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Nick Desaulniers authored
[ Upstream commit 0e38225c ] request_irq is marked __must_check, but the call in shx3_prepare_cpus has a void return type, so it can't propagate failure to the caller. Follow cues from hexagon and just print an error. Fixes: c7936b9a ("sh: smp: Hook in to the generic IPI handler for SH-X3 SMP.") Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Paul Mundt <lethal@linux-sh.org> Reported-by:
Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Michael Ellerman authored
[ Upstream commit fef071be ] In dcr-low.S we use cmpli with three arguments, instead of four arguments as defined in the ISA: cmpli cr0,r3,1024 This appears to be a PPC440-ism, looking at the "PPC440x5 CPU Core User’s Manual" it shows cmpli having no L field, but implied to be 0 due to the core being 32-bit. It mentions that the ISA defines four arguments and recommends using cmplwi. It also corresponds to the old POWER instruction set, which had no L field there, a reserved bit instead. dcr-low.S is only built 32-bit, because it is only built when DCR_NATIVE=y, which is only selected by 40x and 44x. Looking at the generated code (with gcc/gas) we see cmplwi as expected. Although gas is happy with the 3-argument version when building for 32-bit, the LLVM assembler is not and errors out with: arch/powerpc/sysdev/dcr-low.S:27:10: error: invalid operand for instruction cmpli 0,%r3,1024; ... ^ Switch to the cmplwi extended opcode, which avoids any confusion when reading the ISA, fixes the issue with the LLVM assembler, and also means the code could be built 64-bit in future (though that's very unlikely). Reported-by:
Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
BugLink: https://github.com/ClangBuiltLinux/linux/issues/1419
Link: https://lore.kernel.org/r/20211014024424.528848-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Chengfeng Ye authored
[ Upstream commit a0d21bb3 ] The pointer block return from snd_gf1_dma_next_block could be null, so there is a potential null pointer dereference issue. Fix this by adding a null check before dereference. Signed-off-by:
Chengfeng Ye <cyeaa@connect.ust.hk>
Link: https://lore.kernel.org/r/20211024104611.9919-1-cyeaa@connect.ust.hk
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Anatolij Gustschin authored
[ Upstream commit aed2886a ] Fixes build warnings: Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name Signed-off-by:
Anatolij Gustschin <agust@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211013220532.24759-4-agust@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Mike Christie authored
[ Upstream commit 1283c0d1 ] We can't free the tg_pt_gp in core_alua_set_tg_pt_gp_id() because it's still accessed via configfs. Its release must go through the normal configfs/refcount process. The max alua_tg_pt_gps_count check should probably have been done in core_alua_allocate_tg_pt_gp(), but with the current code userspace could have created 0x0000ffff + 1 groups, but only set the id for 0x0000ffff. Then it could have deleted a group with an ID set, and then set the ID for that extra group and it would work ok. It's unlikely, but just in case this patch continues to allow that type of behavior, and just fixes the kfree() while in use bug. Link: https://lore.kernel.org/r/20210930020422.92578-4-michael.christie@oracle.com Signed-off-by:
Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
-