In a recent discussion[1] with Vitaly Nikolenko and Silvio Cesare, it
became clear that moving the freelist pointer away from the edge of
allocations would likely improve the overall defensive posture of the
inline freelist pointer.  My benchmarks show no meaningful change to
performance (they seem to show it being faster), so this looks like a
reasonable change to make.

Instead of having the freelist pointer at the very beginning of an
allocation (offset 0) or at the very end of an allocation (effectively
offset -sizeof(void *) from the next allocation), move it away from the
edges of the allocation and into the middle.  This provides some
protection against small-sized neighboring overflows (or underflows), for
which the freelist pointer is commonly the target.  (Large or well
controlled overwrites are much more likely to attack live object contents,
instead of attempting freelist corruption.)

The vaunted kernel build benchmark, across 5 runs. Before:

	Mean: 250.05
	Std Dev: 1.85

and after, which appears mysteriously faster:

	Mean: 247.13
	Std Dev: 0.76

Attempts at running "sysbench --test=memory" show the change to be well in
the noise (sysbench seems to be pretty unstable here -- it's not really
measuring allocation).

Hackbench is more allocation-heavy, and while the std dev is above the
difference, it looks like may manifest as an improvement as well:

20 runs of "hackbench -g 20 -l 1000", before:

	Mean: 36.322
	Std Dev: 0.577

and after:

	Mean: 36.056
	Std Dev: 0.598

[1] https://twitter.com/vnik5287/status/1235113523098685440



Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Vitaly Nikolenko <vnik@duasynt.com>
Cc: Silvio Cesare <silvio.cesare@gmail.com>
Cc: Christoph Lameter <cl@linux.com>Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: http://lkml.kernel.org/r/202003051624.AAAC9AECC@keescook


Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Under CONFIG_SLAB_FREELIST_HARDENED=y, the obfuscation was relatively weak
in that the ptr and ptr address were usually so close that the first XOR
would result in an almost entirely 0-byte value[1], leaving most of the
"secret" number ultimately being stored after the third XOR.  A single
blind memory content exposure of the freelist was generally sufficient to
learn the secret.

Add a swab() call to mix bits a little more.  This is a cheap way (1
cycle) to make attacks need more than a single exposure to learn the
secret (or to know _where_ the exposure is in memory).

kmalloc-32 freelist walk, before:

ptr              ptr_addr            stored value      secret
ffff90c22e019020@ffff90c22e019000 is 86528eb656b3b5bd (86528eb656b3b59d)
ffff90c22e019040@ffff90c22e019020 is 86528eb656b3b5fd (86528eb656b3b59d)
ffff90c22e019060@ffff90c22e019040 is 86528eb656b3b5bd (86528eb656b3b59d)
ffff90c22e019080@ffff90c22e019060 is 86528eb656b3b57d (86528eb656b3b59d)
ffff90c22e0190a0@ffff90c22e019080 is 86528eb656b3b5bd (86528eb656b3b59d)
...

after:

ptr              ptr_addr            stored value      secret
ffff9eed6e019020@ffff9eed6e019000 is 793d1135d52cda42 (86528eb656b3b59d)
ffff9eed6e019040@ffff9eed6e019020 is 593d1135d52cda22 (86528eb656b3b59d)
ffff9eed6e019060@ffff9eed6e019040 is 393d1135d52cda02 (86528eb656b3b59d)
ffff9eed6e019080@ffff9eed6e019060 is 193d1135d52cdae2 (86528eb656b3b59d)
ffff9eed6e0190a0@ffff9eed6e019080 is f93d1135d52cdac2 (86528eb656b3b59d)

[1] https://blog.infosectcbr.com.au/2020/03/weaknesses-in-linux-kernel-heap.html

Fixes: 2482ddec

 ("mm: add SLUB free list pointer obfuscation")
Reported-by: Silvio Cesare <silvio.cesare@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/202003051623.AF4F8CB@keescook


Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There are slub_cpu_partial() and slub_set_cpu_partial() APIs to wrap
kmem_cache->cpu_partial.  This patch will use the two APIs to replace
kmem_cache->cpu_partial in slub code.

Signed-off-by: chenqiwu <chenqiwu@xiaomi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: http://lkml.kernel.org/r/1582079562-17980-1-git-send-email-qiwuchen55@gmail.com


Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There are slub_percpu_partial() and slub_set_percpu_partial() APIs to wrap
kmem_cache->cpu_partial.  This patch will use the two to replace
cpu_slab->partial in slub code.

Signed-off-by: chenqiwu <chenqiwu@xiaomi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: http://lkml.kernel.org/r/1581951895-3038-1-git-send-email-qiwuchen55@gmail.com


Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This notice fills my boot logs with scary-looking asterisks but doesn't
really tell me anything.  Let's just remove it; validation errors are
already reported separately, so this is just a redundant list of
filesystems.

$ dmesg | grep VALIDATE
[    0.306256] *** VALIDATE tmpfs ***
[    0.307422] *** VALIDATE proc ***
[    0.308355] *** VALIDATE cgroup ***
[    0.308741] *** VALIDATE cgroup2 ***
[    0.813256] *** VALIDATE bpf ***
[    0.815272] *** VALIDATE ramfs ***
[    0.815665] *** VALIDATE hugetlbfs ***
[    0.876970] *** VALIDATE nfs ***
[    0.877383] *** VALIDATE nfs4 ***

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Seth Arnold <seth.arnold@canonical.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Link: http://lkml.kernel.org/r/202003061617.A8835CAAF@keescook


Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

OCFS2 doesn't mind if memory reclaim makes I/Os happen; it just cares that
it won't be reentered, so it can use memalloc_nofs_save() instead of
memalloc_noio_save().

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Link: http://lkml.kernel.org/r/20200326200214.1102-1-willy@infradead.org


Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since snprintf() returns the would-be-output size instead of the actual
output size, the succeeding calls may go beyond the given buffer limit.
Fix it by replacing with scnprintf().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Link: http://lkml.kernel.org/r/20200311093516.25300-1-tiwai@suse.de


Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Under some conditions, the directory cannot be deleted.  The specific
scenarios are as follows: (for example, /mnt/ocfs2 is the mount point)

1. Create the /mnt/ocfs2/p_dir directory.  At this time, the i_nlink
   corresponding to the inode of the /mnt/ocfs2/p_dir directory is equal
   to 2.

2. During the process of creating the /mnt/ocfs2/p_dir/s_dir
   directory, if the call to the inc_nlink function in ocfs2_mknod
   succeeds, the functions such as ocfs2_init_acl,
   ocfs2_init_security_set, and ocfs2_dentry_attach_lock fail.  At this
   time, the i_nlink corresponding to the inode of the /mnt/ocfs2/p_dir
   directory is equal to 3, but /mnt/ocfs2/p_dir/s_dir is not added to the
   /mnt/ocfs2/p_dir directory entry.

3. Delete the /mnt/ocfs2/p_dir directory (rm -rf /mnt/ocfs2/p_dir).
   At this time, it is found that the i_nlink corresponding to the inode
   corresponding to the /mnt/ocfs2/p_dir directory is equal to 3.
   Therefore, the /mnt/ocfs2/p_dir directory cannot be deleted.

Signed-off-by: Jian wang <wangjian161@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Link: http://lkml.kernel.org/r/a44f6666-bbc4-405e-0e6c-0f4e922eeef6@huawei.com


Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The current codebase makes use of the zero-length array language extension
to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning in
case the flexible array does not occur last in the structure, which will
help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by this
change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied.  As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://urldefense.com/v3/__https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html__;!!GqivPVa7Brio!OKPotRhYhHbCG2kibo8Q6_6CuKaa28d_74h1svxyR6rbshrK2L_BdrQpNbvJWBWb40QCkg$
[2] https://urldefense.com/v3/__https://github.com/KSPP/linux/issues/21__;!!GqivPVa7Brio!OKPotRhYhHbCG2kibo8Q6_6CuKaa28d_74h1svxyR6rbshrK2L_BdrQpNbvJWBUhNn9M6g$
[3] commit 76497732

 ("cxgb3/l2t: Fix undefined behaviour")

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Link: http://lkml.kernel.org/r/20200309202155.GA8432@embeddedor


Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The current codebase makes use of the zero-length array language extension
to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning in
case the flexible array does not occur last in the structure, which will
help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by this
change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied.  As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://urldefense.com/v3/__https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html__;!!GqivPVa7Brio!OVOYL_CouISa5L1Lw-20EEFQntw6cKMx-j8UdY4z78uYgzKBUFcfpn50GaurvbV5v7YiUA$
[2] https://urldefense.com/v3/__https://github.com/KSPP/linux/issues/21__;!!GqivPVa7Brio!OVOYL_CouISa5L1Lw-20EEFQntw6cKMx-j8UdY4z78uYgzKBUFcfpn50GaurvbXs8Eh8eg$
[3] commit 76497732

 ("cxgb3/l2t: Fix undefined behaviour")

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Link: http://lkml.kernel.org/r/20200309202016.GA8210@embeddedor


Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The current codebase makes use of the zero-length array language extension
to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning in
case the flexible array does not occur last in the structure, which will
help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by this
change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied.  As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://urldefense.com/v3/__https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html__;!!GqivPVa7Brio!NzMr-YRl2zy-K3lwLVVatz7x0uD2z7-ykQag4GrGigxmfWU8TWzDy6xrkTiW3hYl00czlw$
[2] https://urldefense.com/v3/__https://github.com/KSPP/linux/issues/21__;!!GqivPVa7Brio!NzMr-YRl2zy-K3lwLVVatz7x0uD2z7-ykQag4GrGigxmfWU8TWzDy6xrkTiW3hYHG1nAnw$
[3] commit 76497732

 ("cxgb3/l2t: Fix undefined behaviour")

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Link: http://lkml.kernel.org/r/20200309201907.GA8005@embeddedor


Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The current codebase makes use of the zero-length array language extension
to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning in
case the flexible array does not occur last in the structure, which will
help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by this
change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied.  As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732

 ("cxgb3/l2t: Fix undefined behaviour")

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Link: http://lkml.kernel.org/r/20200213160244.GA6088@embeddedor


Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Sparse reports warnings at ocfs2_refcount_cache_lock()
	and ocfs2_refcount_cache_unlock()

warning: context imbalance in ocfs2_refcount_cache_lock()
	- wrong count at exit
warning: context imbalance in ocfs2_refcount_cache_unlock()
	- unexpected unlock

The root cause is the missing annotation at ocfs2_refcount_cache_lock()
and at ocfs2_refcount_cache_unlock()

Add the missing __acquires(&rf->rf_lock) annotation to
ocfs2_refcount_cache_lock()

Add the missing __releases(&rf->rf_lock) annotation to
ocfs2_refcount_cache_unlock()

Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Link: http://lkml.kernel.org/r/20200224204130.18178-1-jbi.octave@gmail.com


Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We don't need 'err' in these 2 places, better to remove them.

Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: ChenGang <cg.chen@huawei.com>
Cc: Richard Fontana <rfontana@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1579577836-251879-1-git-send-email-alex.shi@linux.alibaba.com


Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Correct annotation from "l_next_rec" to "l_next_free_rec"

Signed-off-by: Yan Wang <wangyan122@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jun Piao <piaojun@huawei.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Link: http://lkml.kernel.org/r/5e76c953-3479-1280-023c-ad05e4c75608@huawei.com


Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There is no need to log twice in several functions.

Signed-off-by: Yan Wang <wangyan122@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jun Piao <piaojun@huawei.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Link: http://lkml.kernel.org/r/77eec86a-f634-5b98-4f7d-0cd15185a37b@huawei.com


Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This macro has been unused since it was introduced.

Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Link: http://lkml.kernel.org/r/1579578203-254451-1-git-send-email-alex.shi@linux.alibaba.com


Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This macro should be used.

Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Link: http://lkml.kernel.org/r/1579577840-251956-1-git-send-email-alex.shi@linux.alibaba.com


Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

O2HB_DEFAULT_BLOCK_BITS/DLM_THREAD_MAX_ASTS/DLM_MIGRATION_RETRY_MS and
OCFS2_MAX_RESV_WINDOW_BITS/OCFS2_MIN_RESV_WINDOW_BITS have been unused
since commit 66effd3c

 ("ocfs2/dlm: Do not migrate resource to a node
that is leaving the domain").

Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: ChenGang <cg.chen@huawei.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Fontana <rfontana@redhat.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Link: http://lkml.kernel.org/r/1579577827-251796-1-git-send-email-alex.shi@linux.alibaba.com


Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This macro is unused since commit ab09203e

 ("sysctl fs: Remove dead
binary sysctl support").

Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Link: http://lkml.kernel.org/r/1579577812-251572-1-git-send-email-alex.shi@linux.alibaba.com


Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Here are some of the more common spelling mistakes and typos that I've
found while fixing up spelling mistakes in the kernel since November 2019

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joe Perches <joe@perches.com>
Link: http://lkml.kernel.org/r/20200313174946.228216-1-colin.king@canonical.com


Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There are a few cases in the tree where "sysfs" is misspelled as "syfs".

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.ne>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Xiong <xndchn@gmail.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Chris Paterson <chris.paterson2@renesas.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Link: http://lkml.kernel.org/r/20200218152010.27349-1-j.neuschaefer@gmx.net


Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Change a header to mandatory-y if both of the following are met:

[1] At least one architecture (except um) specifies it as generic-y in
    arch/*/include/asm/Kbuild

[2] Every architecture (except um) either has its own implementation
    (arch/*/include/asm/*.h) or specifies it as generic-y in
    arch/*/include/asm/Kbuild

This commit was generated by the following shell script.

----------------------------------->8-----------------------------------

arches=$(cd arch; ls -1 | sed -e '/Kconfig/d' -e '/um/d')

tmpfile=$(mktemp)

grep "^mandatory-y +=" include/asm-generic/Kbuild > $tmpfile

find arch -path 'arch/*/include/asm/Kbuild' |
	xargs sed -n 's/^generic-y += \(.*\)/\1/p' | sort -u |
while read header
do
	mandatory=yes

	for arch in $arches
	do
		if ! grep -q "generic-y += $header" arch/$arch/include/asm/Kbuild &&
			! [ -f arch/$arch/include/asm/$header ]; then
			mandatory=no
			break
		fi
	done

	if [ "$mandatory" = yes ]; then
		echo "mandatory-y += $header" >> $tmpfile

		for arch in $arches
		do
			sed -i "/generic-y += $header/d" arch/$arch/include/asm/Kbuild
		done
	fi

done

sed -i '/^mandatory-y +=/d' include/asm-generic/Kbuild

LANG=C sort $tmpfile >> include/asm-generic/Kbuild

----------------------------------->8-----------------------------------

One obvious benefit is the diff stat:

 25 files changed, 52 insertions(+), 557 deletions(-)

It is tedious to list generic-y for each arch that needs it.

So, mandatory-y works like a fallback default (by just wrapping
asm-generic one) when arch does not have a specific header
implementation.

See the following commits:

def3f7ce
a1b39bae



It is tedious to convert headers one by one, so I processed by a shell
script.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: http://lkml.kernel.org/r/20200210175452.5030-1-masahiroy@kernel.org


Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The timer used by delayed kthread works are IRQ safe because the used
kthread_delayed_work_timer_fn() is IRQ safe.

It is properly marked when initialized by KTHREAD_DELAYED_WORK_INIT().
But TIMER_IRQSAFE flag is missing when initialized by
kthread_init_delayed_work().

The missing flag might trigger invalid warning from del_timer_sync() when
kthread_mod_delayed_work() is called with interrupts disabled.

This patch is result of a discussion about using the API, see
https://lkml.kernel.org/r/cfa886ad-e3b7-c0d2-3ff8-58d94170eab5@ti.com



Reported-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200217120709.1974-1-pmladek@suse.com


Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

A recent change to the netlink code: 6e237d09 ("netlink: Relax attr
validation for fixed length types") logs a warning when programs send
messages with invalid attributes (e.g., wrong length for a u32).  Yafang
reported this error message for tools/accounting/getdelays.c.

send_cmd() is wrongly adding 1 to the attribute length.  As noted in
include/uapi/linux/netlink.h nla_len should be NLA_HDRLEN + payload
length, so drop the +1.

Fixes: 9e06d3f9

 ("per task delay accounting taskstats interface: documentation fix")
Reported-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200327173111.63922-1-dsahern@kernel.org


Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Every remaining user just has the error case returning -EFAULT.

In fact, the exception was __get_user_asm_nozero(), which was removed in
commit 4b842e4e

 ("x86: get rid of small constant size cases in
raw_copy_{to,from}_user()"), and the other __get_user_xyz() macros just
followed suit for consistency.

Fix up some macro whitespace while at it.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The last user was removed by commit 4b842e4e

 ("x86: get rid of small
constant size cases in raw_copy_{to,from}_user()").  Get rid of the
left-overs before somebody tries to use it again.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking updates from David Miller:
 "Highlights:

   1) Fix the iwlwifi regression, from Johannes Berg.

   2) Support BSS coloring and 802.11 encapsulation offloading in
      hardware, from John Crispin.

   3) Fix some potential Spectre issues in qtnfmac, from Sergey
      Matyukevich.

   4) Add TTL decrement action to openvswitch, from Matteo Croce.

   5) Allow paralleization through flow_action setup by not taking the
      RTNL mutex, from Vlad Buslov.

   6) A lot of zero-length array to flexible-array conversions, from
      Gustavo A. R. Silva.

   7) Align XDP statistics names across several drivers for consistency,
      from Lorenzo Bianconi.

   8) Add various pieces of infrastructure for offloading conntrack, and
      make use of it in mlx5 driver, from Paul Blakey.

   9) Allow using listening sockets in BPF sockmap, from Jakub Sitnicki.

  10) Lots of parallelization improvements during configuration changes
      in mlxsw driver, from Ido Schimmel.

  11) Add support to devlink for generic packet traps, which report
      packets dropped during ACL processing. And use them in mlxsw
      driver. From Jiri Pirko.

  12) Support bcmgenet on ACPI, from Jeremy Linton.

  13) Make BPF compatible with RT, from Thomas Gleixnet, Alexei
      Starovoitov, and your's truly.

  14) Support XDP meta-data in virtio_net, from Yuya Kusakabe.

  15) Fix sysfs permissions when network devices change namespaces, from
      Christian Brauner.

  16) Add a flags element to ethtool_ops so that drivers can more simply
      indicate which coalescing parameters they actually support, and
      therefore the generic layer can validate the user's ethtool
      request. Use this in all drivers, from Jakub Kicinski.

  17) Offload FIFO qdisc in mlxsw, from Petr Machata.

  18) Support UDP sockets in sockmap, from Lorenz Bauer.

  19) Fix stretch ACK bugs in several TCP congestion control modules,
      from Pengcheng Yang.

  20) Support virtual functiosn in octeontx2 driver, from Tomasz
      Duszynski.

  21) Add region operations for devlink and use it in ice driver to dump
      NVM contents, from Jacob Keller.

  22) Add support for hw offload of MACSEC, from Antoine Tenart.

  23) Add support for BPF programs that can be attached to LSM hooks,
      from KP Singh.

  24) Support for multiple paths, path managers, and counters in MPTCP.
      From Peter Krystad, Paolo Abeni, Florian Westphal, Davide Caratti,
      and others.

  25) More progress on adding the netlink interface to ethtool, from
      Michal Kubecek"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2121 commits)
  net: ipv6: rpl_iptunnel: Fix potential memory leak in rpl_do_srh_inline
  cxgb4/chcr: nic-tls stats in ethtool
  net: dsa: fix oops while probing Marvell DSA switches
  net/bpfilter: remove superfluous testing message
  net: macb: Fix handling of fixed-link node
  net: dsa: ksz: Select KSZ protocol tag
  netdevsim: dev: Fix memory leak in nsim_dev_take_snapshot_write
  net: stmmac: add EHL 2.5Gbps PCI info and PCI ID
  net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID
  net: stmmac: create dwmac-intel.c to contain all Intel platform
  net: dsa: bcm_sf2: Support specifying VLAN tag egress rule
  net: dsa: bcm_sf2: Add support for matching VLAN TCI
  net: dsa: bcm_sf2: Move writing of CFP_DATA(5) into slicing functions
  net: dsa: bcm_sf2: Check earlier for FLOW_EXT and FLOW_MAC_EXT
  net: dsa: bcm_sf2: Disable learning for ASP port
  net: dsa: b53: Deny enslaving port 7 for 7278 into a bridge
  net: dsa: b53: Prevent tagged VLAN on port 7 for 7278
  net: dsa: b53: Restore VLAN entries upon (re)configuration
  net: dsa: bcm_sf2: Fix overflow checks
  hv_netvsc: Remove unnecessary round_up for recv_completion_cnt
  ...

Pull NTB updates from Jon Mason:
 "Bug fixes for a few printing issues, link status detection bug on AMD
  hardware, and a DMA address issue with ntb_perf.

  Also, large series of AMD NTB patches"

* tag 'ntb-5.7' of git://github.com/jonmason/ntb: (21 commits)
  NTB: add pci shutdown handler for AMD NTB
  NTB: send DB event when driver is loaded or un-loaded
  NTB: remove redundant setting of DB valid mask
  NTB: return link up status correctly for PRI and SEC
  NTB: add helper functions to set and clear sideinfo
  NTB: move ntb_ctrl handling to init and deinit
  NTB: handle link up, D0 and D3 events correctly
  NTB: handle link down event correctly
  NTB: remove handling of peer_sta from amd_link_is_up
  NTB: set peer_sta within event handler itself
  NTB: return the side info status from amd_poll_link
  NTB: define a new function to get link status
  NTB: Enable link up and down event notification
  NTB: clear interrupt status register
  NTB: Fix access to link status and control register
  MAINTAINERS: update maintainer list for AMD NTB driver
  NTB: ntb_transport: Use scnprintf() for avoiding potential buffer overflow
  ntb_hw_switchtec: Fix ntb_mw_clear_trans error if size == 0
  ntb_tool: Fix printk format
  NTB: ntb_perf: Fix address err in perf_copy_chunk
  ...

Pull x86 platform driver updates from Andy Shevchenko:

 - Fix for improper handling of fan_boost_mode in sysfs for ASUS
   laptops.

 - On newer ASUS laptops the 1st battery is named differently, here is a
   fix.

 - Fix Lex 2I385SW to allow both network cards to be used.

 - The power integrated circuit driver for Surface 3 has been added.

 - Refactor and clean up of Intel PMC driver and enable it on Intel
   Jasper Lake.

 - Clean up of Dell RBU driver.

 - Big update for Intel Speed Select technology support tool and driver.

* tag 'platform-drivers-x86-v5.7-1' of git://git.infradead.org/linux-platform-drivers-x86: (75 commits)
  platform/x86: surface3_power: Fix always true condition in mshw0011_space_handler()
  platform/x86: surface3_power: Fix Kconfig section ordering
  platform/x86: surface3_power: Add missed headers
  platform/x86: surface3_power: Reformat GUID assignment
  platform/x86: surface3_power: Drop useless macro ACPI_PTR()
  platform/x86: surface3_power: Prefix POLL_INTERVAL with SURFACE_3
  platform/x86: surface3_power: Simplify mshw0011_adp_psr() to one liner
  platform/x86: surface3_power: Use dev_err() instead of pr_err()
  platform/x86: surface3_power: Drop unused structure definition
  platform/x86: surface3_power: MSHW0011 rev-eng implementation
  platform/x86: intel_pmc_core: Make pmc_core_substate_res_show() generic
  platform/x86: intel_pmc_core: Make pmc_core_lpm_display() generic for platforms that support sub-states
  tools/power/x86/intel-speed-select: Fix a typo in error message
  tools/power/x86/intel-speed-select: Update version
  tools/power/x86/intel-speed-select: Avoid duplicate Package strings for json
  tools/power/x86/intel-speed-select: Add display for enabled cpus count
  tools/power/x86/intel-speed-select: Print friendly warning for bad command line
  tools/power/x86/intel-speed-select: Fix avx options for turbo-freq feature
  tools/power/x86/intel-speed-select: Improve CLX commands
  tools/power/x86/intel-speed-select: Show error for invalid CPUs in the options
  ...

Pull tty/serial updates from Greg KH:
 "Here is the big set of TTY / Serial patches for 5.7-rc1

  Lots of console fixups and reworking in here, serial core tweaks
  (doesn't that ever get old, why are we still creating new serial
  devices?), serial driver updates, line-protocol driver updates, and
  some vt cleanups and fixes included in here as well.

  All have been in linux-next with no reported issues"

* tag 'tty-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (161 commits)
  serial: 8250: Optimize irq enable after console write
  serial: 8250: Fix rs485 delay after console write
  vt: vt_ioctl: fix use-after-free in vt_in_use()
  vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use virtual console
  tty: serial: make SERIAL_SPRD depend on COMMON_CLK
  tty: serial: fsl_lpuart: fix return value checking
  tty: serial: fsl_lpuart: move dma_request_chan()
  ARM: dts: tango4: Make /serial compatible with ns16550a
  ARM: dts: mmp*: Make the serial ports compatible with xscale-uart
  ARM: dts: mmp*: Fix serial port names
  ARM: dts: mmp2-brownstone: Don't redeclare phandle references
  ARM: dts: pxa*: Make the serial ports compatible with xscale-uart
  ARM: dts: pxa*: Fix serial port names
  ARM: dts: pxa*: Don't redeclare phandle references
  serial: omap: drop unused dt-bindings header
  serial: 8250: 8250_omap: Add DMA support for UARTs on K3 SoCs
  serial: 8250: 8250_omap: Work around errata causing spurious IRQs with DMA
  serial: 8250: 8250_omap: Extend driver data to pass FIFO trigger info
  serial: 8250: 8250_omap: Move locking out from __dma_rx_do_complete()
  serial: 8250: 8250_omap: Account for data in flight during DMA teardown
  ...

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Add support for host software queue for (e)MMC/SD
   - Throttle polling rate for CMD6
   - Update CMD13 busy condition check for CMD6 commands
   - Improve busy detect polling for erase/trim/discard/HPI
   - Fixup support for HW busy detection for HPI commands
   - Re-work and improve support for eMMC sanitize commands

  MMC host:
   - mmci:
       * Add support for sdmmc variant revision 2.0
   - mmci_sdmmc:
       * Improve support for busyend detection
       * Fixup support for signal voltage switch
       * Add support for tuning with delay block
   - mtk-sd:
       * Fix another SDIO irq issue
   - sdhci:
       * Disable native card detect when GPIO based type exist
   - sdhci:
       * Add option to defer request completion
   - sdhci_am654:
       * Add support to set a tap value per speed mode
   - sdhci-esdhc-imx:
       * Add support for i.MX8MM based variant
       * Fixup support for standard tuning on i.MX8 usdhc
       * Optimize for strobe/clock dll settings
       * Fixup support for system and runtime suspend/resume
   - sdhci-iproc:
       * Update regulator/bus-voltage management for bcm2711
   - sdhci-msm:
       * Prevent clock gating with PWRSAVE_DLL on broken variants
       * Fix management of CQE during SDHCI reset
   - sdhci-of-arasan:
       * Add support for auto tuning on ZynqMP based platforms
   - sdhci-omap:
       * Add support for system suspend/resume
   - sdhci-sprd:
       * Add support for HW busy detection
       * Enable support host software queue
   - sdhci-tegra:
       * Add support for HW busy detection
   - tmio/renesas_sdhi:
       * Enforce retune after runtime suspend
   - renesas_sdhi:
       * Use manual tap correction for HS400 on some variants
       * Add support for manual correction of tap values for tunings"

* tag 'mmc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (86 commits)
  mmc: cavium-octeon: remove nonsense variable coercion
  mmc: mediatek: fix SDIO irq issue
  mmc: mmci_sdmmc: Fix clear busyd0end irq flag
  dt-bindings: mmc: Fix node name in an example
  mmc: core: Re-work the code for eMMC sanitize
  mmc: sdhci: use FIELD_GET for preset value bit masks
  mmc: sdhci-of-at91: Display clock changes for debug purpose only
  mmc: sdhci: iproc: Add custom set_power() callback for bcm2711
  mmc: sdhci: am654: Use sdhci_set_power_and_voltage()
  mmc: sdhci: at91: Use sdhci_set_power_and_voltage()
  mmc: sdhci: milbeaut: Use sdhci_set_power_and_voltage()
  mmc: sdhci: arasan: Use sdhci_set_power_and_voltage()
  mmc: sdhci: Introduce sdhci_set_power_and_bus_voltage()
  mmc: vub300: Use scnprintf() for avoiding potential buffer overflow
  dt-bindings: mmc: synopsys-dw-mshc: fix clock-freq-min-max in example
  sdhci: tegra: Enable MMC_CAP_WAIT_WHILE_BUSY host capability
  sdhci: tegra: Implement Tegra specific set_timeout callback
  mmc: sdhci-omap: Add Support for Suspend/Resume
  mmc: renesas_sdhi: simplify execute_tuning
  mmc: renesas_sdhi: Use BITS_PER_LONG helper
  ...

Pull Kbuild updates from Masahiro Yamada:
 "Build system:

   - add CONFIG_UNUSED_KSYMS_WHITELIST, which will be useful to define a
     fixed set of export symbols for Generic Kernel Image (GKI)

   - allow to run 'make dt_binding_check' without .config

   - use full schema for checking DT examples in *.yaml files

   - make modpost fail for missing MODULE_IMPORT_NS(), which makes more
     sense because we know the produced modules are never loadable

   - Remove unused 'AS' variable

  Kconfig:

   - sanitize DEFCONFIG_LIST, and remove ARCH_DEFCONFIG from Kconfig
     files

   - relax the 'imply' behavior so that symbols implied by 'y' can
     become 'm'

   - make 'imply' obey 'depends on' in order to make 'imply' really weak

  Misc:

   - add documentation on building the kernel with Clang/LLVM

   - revive __HAVE_ARCH_STRLEN for 32bit sparc to use optimized strlen()

   - fix warning from deb-pkg builds when CONFIG_DEBUG_INFO=n

   - various script and Makefile cleanups"

* tag 'kbuild-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
  Makefile: Update kselftest help information
  kbuild: deb-pkg: fix warning when CONFIG_DEBUG_INFO is unset
  kbuild: add outputmakefile to no-dot-config-targets
  kbuild: remove AS variable
  net: wan: wanxl: refactor the firmware rebuild rule
  net: wan: wanxl: use $(M68KCC) instead of $(M68KAS) for rebuilding firmware
  net: wan: wanxl: use allow to pass CROSS_COMPILE_M68k for rebuilding firmware
  kbuild: add comment about grouped target
  kbuild: add -Wall to KBUILD_HOSTCXXFLAGS
  kconfig: remove unused variable in qconf.cc
  sparc: revive __HAVE_ARCH_STRLEN for 32bit sparc
  kbuild: refactor Makefile.dtbinst more
  kbuild: compute the dtbs_install destination more simply
  Makefile: disallow data races on gcc-10 as well
  kconfig: make 'imply' obey the direct dependency
  kconfig: allow symbols implied by y to become m
  net: drop_monitor: use IS_REACHABLE() to guard net_dm_hw_report()
  modpost: return error if module is missing ns imports and MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=n
  modpost: rework and consolidate logging interface
  kbuild: allow to run dt_binding_check without kernel configuration
  ...

Merge branch 'next-general' of git://git.kernel.org:/pub/scm/linux/kernel/git/jmorris/linux-security

Pull security subsystem updates from James Morris:
 "Two minor updates for the core security subsystem:

   - kernel-doc warning fixes from Randy Dunlap

   - header cleanup from YueHaibing"

* 'next-general' of git://git.kernel.org:/pub/scm/linux/kernel/git/jmorris/linux-security:
  security: remove duplicated include from security.h
  security: <linux/lsm_hooks.h>: fix all kernel-doc warnings

Pull SELinux updates from Paul Moore:
 "We've got twenty SELinux patches for the v5.7 merge window, the
  highlights are below:

   - Deprecate setting /sys/fs/selinux/checkreqprot to 1.

     This flag was originally created to deal with legacy userspace and
     the READ_IMPLIES_EXEC personality flag. We changed the default from
     1 to 0 back in Linux v4.4 and now we are taking the next step of
     deprecating it, at some point in the future we will take the final
     step of rejecting 1.

   - Allow kernfs symlinks to inherit the SELinux label of the parent
     directory. In order to preserve backwards compatibility this is
     protected by the genfs_seclabel_symlinks SELinux policy capability.

   - Optimize how we store filename transitions in the kernel, resulting
     in some significant improvements to policy load times.

   - Do a better job calculating our internal hash table sizes which
     resulted in additional policy load improvements and likely general
     SELinux performance improvements as well.

   - Remove the unused initial SIDs (labels) and improve how we handle
     initial SIDs.

   - Enable per-file labeling for the bpf filesystem.

   - Ensure that we properly label NFS v4.2 filesystems to avoid a
     temporary unlabeled condition.

   - Add some missing XFS quota command types to the SELinux quota
     access controls.

   - Fix a problem where we were not updating the seq_file position
     index correctly in selinuxfs.

   - We consolidate some duplicated code into helper functions.

   - A number of list to array conversions.

   - Update Stephen Smalley's email address in MAINTAINERS"

* tag 'selinux-pr-20200330' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: clean up indentation issue with assignment statement
  NFS: Ensure security label is set for root inode
  MAINTAINERS: Update my email address
  selinux: avtab_init() and cond_policydb_init() return void
  selinux: clean up error path in policydb_init()
  selinux: remove unused initial SIDs and improve handling
  selinux: reduce the use of hard-coded hash sizes
  selinux: Add xfs quota command types
  selinux: optimize storage of filename transitions
  selinux: factor out loop body from filename_trans_read()
  security: selinux: allow per-file labeling for bpffs
  selinux: generalize evaluate_cond_node()
  selinux: convert cond_expr to array
  selinux: convert cond_av_list to array
  selinux: convert cond_list to array
  selinux: sel_avc_get_stat_idx should increase position index
  selinux: allow kernfs symlinks to inherit parent directory context
  selinux: simplify evaluate_cond_node()
  Documentation,selinux: deprecate setting checkreqprot to 1
  selinux: move status variables out of selinux_ss

Pull audit updates from Paul Moore:
 "We've got two audit patches for the v5.7 merge window with a stellar
  14 lines changed between the two patches. The patch descriptions are
  far more lengthy than the patches themselves, which is a very good
  thing for patches this size IMHO. The patches pass our test suites and
  a quick summary is below:

   - Stop logging inode information when updating an audit file watch.

     Since we are not changing the inode, or the fact that we are
     watching the associated file, the inode information is just noise
     that we can do without.

   - Fix a problem where mandatory audit records were missing their
     accompanying audit records (e.g. SYSCALL records were missing).

     The missing records often meant that we didn't have the necessary
     context to understand what was going on when the event occurred"

* tag 'audit-pr-20200330' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: trigger accompanying records when no rules present
  audit: CONFIG_CHANGE don't log internal bookkeeping as an event

Pull cifs updates from Steve French:
 "First part of cifs/smb3 changes for merge window (others are still
  being tested). Various RDMA (smbdirect) fixes, addition of SMB3.1.1
  POSIX support in readdir, 3 fixes for stable, and a fix for flock.

  Summary:

  New feature:
   - SMB3.1.1 POSIX support in readdir

  Fixes:
   - various RDMA (smbdirect) fixes
   - fix for flock
   - fallocate fix
   - some improved mount warnings
   - two timestamp related fixes
   - reconnect fix
   - three fixes for stable"

* tag '5.7-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: (28 commits)
  cifs: update internal module version number
  cifs: Allocate encryption header through kmalloc
  cifs: smbd: Check and extend sender credits in interrupt context
  cifs: smbd: Calculate the correct maximum packet size for segmented SMBDirect send/receive
  smb3: use SMB2_SIGNATURE_SIZE define
  CIFS: Fix bug which the return value by asynchronous read is error
  CIFS: check new file size when extending file by fallocate
  SMB3: Minor cleanup of protocol definitions
  SMB3: Additional compression structures
  SMB3: Add new compression flags
  cifs: smb2pdu.h: Replace zero-length array with flexible-array member
  cifs: clear PF_MEMALLOC before exiting demultiplex thread
  cifs: cifspdu.h: Replace zero-length array with flexible-array member
  CIFS: Warn less noisily on default mount
  fs/cifs: fix gcc warning in sid_to_id
  cifs: allow unlock flock and OFD lock across fork
  cifs: do d_move in rename
  cifs: add SMB2_open() arg to return POSIX data
  cifs: plumb smb2 POSIX dir enumeration
  cifs: add smb2 POSIX info level
  ...

Pull gfs2 updates from Bob Peterson:
 "We've got a lot of patches (39) for this merge window. Most of these
  patches are related to corruption that occurs when journals are
  replayed. For example:

   1. A node fails while writing to the file system.
   2. Other nodes use the metadata that was once used by the failed
      node.
   3. When the node returns to the cluster, its journal is replayed, but
      the older metadata blocks overwrite the changes from step 2.

  Summary:

   - Fixed the recovery sequence to prevent corruption during journal
     replay.

   - Many bug fixes found during recovery testing.

   - New improved file system withdraw sequence.

   - Fixed how resource group buffers are managed.

   - Fixed how metadata revokes are tracked and written.

   - Improve processing of IO errors hit by daemons like logd and
     quotad.

   - Improved error checking in metadata writes.

   - Fixed how qadata quota data structures are managed"

* tag 'gfs2-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (39 commits)
  gfs2: Fix oversight in gfs2_ail1_flush
  gfs2: change from write to read lock for sd_log_flush_lock in journal replay
  gfs2: instrumentation wrt ail1 stuck
  gfs2: don't lock sd_log_flush_lock in try_rgrp_unlink
  gfs2: Remove unnecessary gfs2_qa_{get,put} pairs
  gfs2: Split gfs2_rsqa_delete into gfs2_rs_delete and gfs2_qa_put
  gfs2: Change inode qa_data to allow multiple users
  gfs2: eliminate gfs2_rsqa_alloc in favor of gfs2_qa_alloc
  gfs2: Switch to list_{first,last}_entry
  gfs2: Clean up inode initialization and teardown
  gfs2: Additional information when gfs2_ail1_flush withdraws
  gfs2: leaf_dealloc needs to allocate one more revoke
  gfs2: allow journal replay to hold sd_log_flush_lock
  gfs2: don't allow releasepage to free bd still used for revokes
  gfs2: flesh out delayed withdraw for gfs2_log_flush
  gfs2: Do proper error checking for go_sync family of glops functions
  gfs2: Don't demote a glock until its revokes are written
  gfs2: drain the ail2 list after io errors
  gfs2: Withdraw in gfs2_ail1_flush if write_cache_pages fails
  gfs2: Do log_flush in gfs2_ail_empty_gl even if ail list is empty
  ...

Pull btrfs updates from David Sterba:
 "A number of core changes that make things work better in general, code
  is simpler and cleaner.

  Core changes:

   - per-inode file extent tree, for in memory tracking of contiguous
     extent ranges to make sure i_size adjustments are accurate

   - tree root structures are protected by reference counts, replacing
     SRCU that did not cover some cases

   - leak detector for tree root structures

   - per-transaction pinned extent tracking

   - buffer heads are replaced by bios for super block access

   - speedup of extent back reference resolution, on an example test
     scenario the runtime of send went down from a hour to minutes

   - factor out locking scheme used for subvolume writer and NOCOW
     exclusion, abstracted as DREW lock, double reader-writer exclusion
     (allow either readers or writers)

   - cleanup and abstract extent allocation policies, preparation for
     zoned device support

   - make reflink/clone_range work on inline extents

   - add more cancellation point for relocation, improves long response
     from 'balance cancel'

   - add page migration callback for data pages

   - switch to guid for uuids, with additional cleanups of the interface

   - make ranged full fsyncs more efficient

   - removal of obsolete ioctl flag BTRFS_SUBVOL_CREATE_ASYNC

   - remove b-tree readahead from delayed refs paths, avoiding seek and
     read unnecessary blocks

  Features:

   - v2 of ioctl to delete subvolumes, allowing to delete by id and more
     future extensions

  Fixes:

   - fix qgroup rescan worker that could block umount

   - fix crash during unmount due to race with delayed inode workers

   - fix dellaloc flushing logic that could create unnecessary chunks
     under heavy load

   - fix missing file extent item for hole after ranged fsync

   - several fixes in relocation error handling

  Other:

   - more documentation of relocation, device replace, space
     reservations

   - many random cleanups"

* tag 'for-5.7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (210 commits)
  btrfs: fix missing semaphore unlock in btrfs_sync_file
  btrfs: use nofs allocations for running delayed items
  btrfs: sysfs: Use scnprintf() instead of snprintf()
  btrfs: do not resolve backrefs for roots that are being deleted
  btrfs: track reloc roots based on their commit root bytenr
  btrfs: restart relocate_tree_blocks properly
  btrfs: reloc: reorder reservation before root selection
  btrfs: do not readahead in build_backref_tree
  btrfs: do not use readahead for running delayed refs
  btrfs: Remove async_transid from btrfs_mksubvol/create_subvol/create_snapshot
  btrfs: Remove transid argument from btrfs_ioctl_snap_create_transid
  btrfs: Remove BTRFS_SUBVOL_CREATE_ASYNC support
  btrfs: kill the subvol_srcu
  btrfs: make btrfs_cleanup_fs_roots use the radix tree lock
  btrfs: don't take an extra root ref at allocation time
  btrfs: hold a ref on the root on the dead roots list
  btrfs: make inodes hold a ref on their roots
  btrfs: move the root freeing stuff into btrfs_put_root
  btrfs: move ino_cache_inode dropping out of btrfs_free_fs_root
  btrfs: make the extent buffer leak check per fs info
  ...

Pull fscrypt updates from Eric Biggers:
 "Add an ioctl FS_IOC_GET_ENCRYPTION_NONCE which retrieves a file's
  encryption nonce.

  This makes it easier to write automated tests which verify that
  fscrypt is doing the encryption correctly"

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  ubifs: wire up FS_IOC_GET_ENCRYPTION_NONCE
  f2fs: wire up FS_IOC_GET_ENCRYPTION_NONCE
  ext4: wire up FS_IOC_GET_ENCRYPTION_NONCE
  fscrypt: add FS_IOC_GET_ENCRYPTION_NONCE ioctl