- Mar 24, 2021
-
-
Sagi Grimberg authored
commit d218a8a3 upstream. From the base spec, Figure 78: "Controller Configuration, these fields are defined as parameters to configure an "I/O Controller (IOC)" and not to configure a "Discovery Controller (DC). ... If the controller does not support I/O queues, then this field shall be read-only with a value of 0h Just perform this check for I/O controllers. Fixes: a07b4970 ("nvmet: add a generic NVMe target") Reported-by:
Belanger, Martin <Martin.Belanger@dell.com> Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sagi Grimberg authored
commit fd0823f4 upstream. When the controller sends us a 0-length r2t PDU we should not attempt to try to set up a h2cdata PDU but rather conclude that this is a buggy controller (forward progress is not possible) and simply fail it immediately. Fixes: 3f2304f8 ("nvme-tcp: add NVMe over TCP host driver") Reported-by:
Belanger, Martin <Martin.Belanger@dell.com> Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sagi Grimberg authored
commit 72f57242 upstream. We only setup io queues for nvme controllers, and it makes absolutely no sense to allow a controller (re)connect without any I/O queues. If we happen to fail setting the queue count for any reason, we should not allow this to be a successful reconnect as I/O has no chance in going through. Instead just fail and schedule another reconnect. Fixes: 3f2304f8 ("nvme-tcp: add NVMe over TCP host driver") Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sagi Grimberg authored
commit bb833370 upstream. For our pure advisory use-case, we only rely on this call as a hint, so fix the warning complaints of using the smp_processor_id variants with preemption enabled. Fixes: db5ad6b7 ("nvme-tcp: try to send request in queue_rq context") Fixes: ada83177 ("nvme-tcp: Fix warning with CONFIG_DEBUG_PREEMPT") Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Tested-by:
Yi Zhang <yi.zhang@redhat.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christoph Hellwig authored
commit b94e8cd2 upstream. We voluntarily limit the Write Zeroes sizes to the MDTS value provided by the hardware, but currently get the units wrong, so fix that. Fixes: 6e02318e ("nvme: add support for the Write Zeroes command") Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Keith Busch <kbusch@kernel.org> Tested-by:
Klaus Jensen <k.jensen@samsung.com> Reviewed-by:
Klaus Jensen <k.jensen@samsung.com> Reviewed-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by:
Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Colin Ian King authored
commit 50b1affc upstream. The shifting of the u8 integer device by 24 bits to the left will be promoted to a 32 bit signed int and then sign-extended to a 64 bit unsigned long. In the event that the top bit of device is set then all then all the upper 32 bits of the unsigned long will end up as also being set because of the sign-extension. Fix this by casting device to an unsigned long before the shift. Addresses-Coverity: ("Unintended sign extension") Fixes: a07df82c ("ALSA: usb-audio: Add DJM750 to Pioneer mixer quirk") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210318132008.15266-1-colin.king@canonical.com Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Howells authored
commit a7889c63 upstream. afs_listxattr() lists all the available special afs xattrs (i.e. those in the "afs.*" space), no matter what type of server we're dealing with. But OpenAFS servers, for example, cannot deal with some of the extra-capable attributes that AuriStor (YFS) servers provide. Unfortunately, the presence of the afs.yfs.* attributes causes errors[1] for anything that tries to read them if the server is of the wrong type. Fix the problem by removing afs_listxattr() so that none of the special xattrs are listed (AFS doesn't support xattrs). It does mean, however, that getfattr won't list them, though they can still be accessed with getxattr() and setxattr(). This can be tested with something like: getfattr -d -m ".*" /afs/example.com/path/to/file With this change, none of the afs.* attributes should be visible. Changes: ver #2: - Hide all of the afs.* xattrs, not just the ACL ones. Fixes: ae46578b ("afs: Get YFS ACLs and information through xattrs") Reported-by:
Gaja Sophie Peters <gaja.peters@math.uni-hamburg.de> Signed-off-by:
David Howells <dhowells@redhat.com> Tested-by:
Gaja Sophie Peters <gaja.peters@math.uni-hamburg.de> Reviewed-by:
Jeffrey Altman <jaltman@auristor.com> Reviewed-by:
Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003502.html [1] Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003567.html # v1 Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003573.html # v2 Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Howells authored
commit 64fcbb61 upstream. If someone attempts to access YFS-related xattrs (e.g. afs.yfs.acl) on a file on a non-YFS AFS server (such as OpenAFS), then the kernel will jump to a NULL function pointer because the afs_fetch_acl_operation descriptor doesn't point to a function for issuing an operation on a non-YFS server[1]. Fix this by making afs_wait_for_operation() check that the issue_afs_rpc method is set before jumping to it and setting -ENOTSUPP if not. This fix also covers other potential operations that also only exist on YFS servers. afs_xattr_get/set_yfs() then need to translate -ENOTSUPP to -ENODATA as the former error is internal to the kernel. The bug shows up as an oops like the following: BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [...] Call Trace: afs_wait_for_operation+0x83/0x1b0 [kafs] afs_xattr_get_yfs+0xe6/0x270 [kafs] __vfs_getxattr+0x59/0x80 vfs_getxattr+0x11c/0x140 getxattr+0x181/0x250 ? __check_object_size+0x13f/0x150 ? __fput+0x16d/0x250 __x64_sys_fgetxattr+0x64/0xb0 do_syscall_64+0x49/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fb120a9defe This was triggered with "cp -a" which attempts to copy xattrs, including afs ones, but is easier to reproduce with getfattr, e.g.: getfattr -d -m ".*" /afs/openafs.org/ Fixes: e49c7b2f ("afs: Build an abstraction around an "operation" concept") Reported-by:
Gaja Sophie Peters <gaja.peters@math.uni-hamburg.de> Signed-off-by:
David Howells <dhowells@redhat.com> Tested-by:
Gaja Sophie Peters <gaja.peters@math.uni-hamburg.de> Reviewed-by:
Marc Dionne <marc.dionne@auristor.com> Reviewed-by:
Jeffrey Altman <jaltman@auristor.com> cc: linux-afs@lists.infradead.org Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003498.html [1] Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003566.html # v1 Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003572.html # v2 Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sameer Pujar authored
commit 8ca88d53 upstream. This reverts commit 1e30f642 ("ASoC: simple-card-utils: Fix device module clock"). The original patch ended up breaking following platform, which depends on set_sysclk() to configure internal PLL on wm8904 codec and expects simple-card-utils to not update the MCLK rate. - "arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts" It would be best if codec takes care of setting MCLK clock via DAI set_sysclk() callback. Reported-by:
Michael Walle <michael@walle.cc> Suggested-by:
Mark Brown <broonie@kernel.org> Suggested-by:
Michael Walle <michael@walle.cc> Fixes: 1e30f642 ("ASoC: simple-card-utils: Fix device module clock") Signed-off-by:
Sameer Pujar <spujar@nvidia.com> Tested-by:
Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/1615829492-8972-2-git-send-email-spujar@nvidia.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Srinivasa Rao Mandadapu authored
commit 9922f50f upstream. The max boundary check while parsing dai ids makes sound card registration fail after common up dai ids. Fixes: cd3484f7 ("ASoC: qcom: Fix broken support to MI2S TERTIARY and QUATERNARY") Signed-off-by:
Srinivasa Rao Mandadapu <srivasam@codeaurora.org> Link: https://lore.kernel.org/r/20210311154557.24978-1-srivasam@codeaurora.org Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Srinivas Kandagatla authored
commit 3bb4852d upstream. set channel map can be passed with a channel maps, however if the number of channels that are passed are more than the actual supported channels then we would be accessing array out of bounds. So add a sanity check to validate these numbers! Fixes: a61f3b4f ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec") Reported-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210309142129.14182-4-srinivas.kandagatla@linaro.org Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Srinivas Kandagatla authored
commit 4800fe6e upstream. WCD934x has only 13 RX SLIM ports however we are setting it as 16 in set_channel_map, this will lead to array out of bounds error! Orignally caught by enabling USBAN array out of bounds check: Fixes: 5caf64c6 ("ASoC: qcom: sdm845: add support to DB845c and Lenovo Yoga") Reported-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210309142129.14182-3-srinivas.kandagatla@linaro.org Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Srinivas Kandagatla authored
commit 1c668e1c upstream. Static analysis Coverity had detected a potential array out-of-bounds write issue due to the fact that MAX AFE port Id was set to 16 instead of using AFE_PORT_MAX macro. Fix this by properly using AFE_PORT_MAX macro. Fixes: 1b93a884 ("ASoC: qcom: sdm845: handle soundwire stream") Reported-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210309142129.14182-2-srinivas.kandagatla@linaro.org Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pan Xiuli authored
commit fd829918 upstream. The ADSPCS_SPA is Set Power Active bit. To check if DSP is powered down, we need to check ADSPCS_CPA, the Current Power Active bit. Fixes: 747503b1 ("ASoC: SOF: Intel: Add Intel specific HDA DSP HW operations") Reviewed-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
Pan Xiuli <xiuli.pan@linux.intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210309004127.4940-1-pierre-louis.bossart@linux.intel.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pierre-Louis Bossart authored
commit 5bb0ecdd upstream. We only unregister the platform device during the .remove operation, but if the probe fails we will never reach this sequence. Suggested-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Fixes: dd96daca ("ASoC: SOF: Intel: Add APL/CNL HW DSP support") Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20210302003410.1178535-1-pierre-louis.bossart@linux.intel.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hans de Goede authored
commit ca08ddfd upstream. When I added the quirk for the "HP Pavilion x2 10-p0XX" I copied the byt_rt5640_quirk_table[] entry for the HP Pavilion x2 10-k0XX / 10-n0XX models since these use almost the same settings. While doing this I accidentally also copied and kept the non-standard OVCD_TH_1500UA setting used on those models. This too low threshold is causing headsets to often be seen as headphones (without a headset-mic) and when correctly identified it is causing ghost play/pause button-presses to get detected. Correct the HP Pavilion x2 10-p0XX quirk to use the default OVCD_TH_2000UA setting, fixing these problems. Fixes: fbdae7d6 ("ASoC: Intel: bytcr_rt5640: Fix HP Pavilion x2 Detachable quirks") Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210224105052.42116-1-hdegoede@redhat.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Shiyan authored
commit 87263968 upstream. When using the driver in I2S TDM mode, the _fsl_ssi_set_dai_fmt() function rewrites the number of slots previously set by the fsl_ssi_set_dai_tdm_slot() function to 2 by default. To fix this, let's use the saved slot count value or, if TDM is not used and the slot count is not set, proceed as before. Fixes: 4f14f5c1 ("ASoC: fsl_ssi: Fix number of words per frame for I2S-slave mode") Signed-off-by:
Alexander Shiyan <shc_work@mail.ru> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/20210216114221.26635-1-shc_work@mail.ru Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Joerg Roedel authored
commit 072a03e0 upstream. The AMD IOMMU will not be enabled on AMD Stoney Ridge systems. Bail out even earlier and refuse to even detect the IOMMU there. References: https://bugzilla.kernel.org/show_bug.cgi?id=212133 References: https://bugzilla.suse.com/show_bug.cgi?id=1183132 Cc: stable@vger.kernel.org # v5.11 Signed-off-by:
Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20210317091037.31374-2-joro@8bytes.org Acked-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Joerg Roedel authored
commit 4b8ef157 upstream. The amd_iommu_irq_remap variable is set to true in amd_iommu_prepare(). But if initialization fails it is not set to false. Fix that and correctly keep track of whether irq remapping is enabled or not. References: https://bugzilla.kernel.org/show_bug.cgi?id=212133 References: https://bugzilla.suse.com/show_bug.cgi?id=1183132 Fixes: b34f10c2 ("iommu/amd: Stop irq_remapping_select() matching when remapping is disabled") Cc: stable@vger.kernel.org # v5.11 Signed-off-by:
Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20210317091037.31374-4-joro@8bytes.org Acked-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Joerg Roedel authored
commit 9f81ca8d upstream. Don't even try to initialize the AMD IOMMU hardware when amd_iommu=off has been passed on the kernel command line. References: https://bugzilla.kernel.org/show_bug.cgi?id=212133 References: https://bugzilla.suse.com/show_bug.cgi?id=1183132 Cc: stable@vger.kernel.org # v5.11 Signed-off-by:
Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20210317091037.31374-3-joro@8bytes.org Acked-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dillon Varone authored
commit beb6b2f9 upstream. [Why?] Should only reroute gamut remap to mpc unless 3D LUT is not used and all planes are using the same src->dest. [How?] Remove DCN30 specific logic for rerouting gamut remap to mpc. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1513 Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Dillon Varone <dillon.varone@amd.com> Reviewed-by:
Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by:
Aric Cyr <Aric.Cyr@amd.com> Acked-by:
Solomon Chiu <solomon.chiu@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Calvin Hou authored
commit 34fa493a upstream. [Why] DCN30 needs to correctly program reversed gamma curve, which DCN20 already has. Also needs to fix a bug that 252-255 values are clipped. [How] Apply two fixes into DCN30. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1513 Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Calvin Hou <Calvin.Hou@amd.com> Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Reviewed-by:
Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by:
Solomon Chiu <solomon.chiu@amd.com> Acked-by:
Vladimir Stempen <Vladimir.Stempen@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sung Lee authored
commit 73076790 upstream. [Why] With certain fclock overclocks, state 1 may be chosen as the closest clock level. This may result in this state being empty if not populated beforehand, resulting in black screens and screen corruption. [How] Copy over all soc states to clock_limits before bounding box creation to avoid any cases with empty states. Fixes: f2459c52 ("drm/amd/display: Add Bounding Box State for Low DF PState but High Voltage State") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1514 Signed-off-by:
Sung Lee <sung.lee@amd.com> Reviewed-by:
Tony Cheng <Tony.Cheng@amd.com> Reviewed-by:
Yongqiang Sun <yongqiang.sun@amd.com> Acked-by:
Qingqing Zhuo <Qingqing.Zhuo@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stefano Garzarella authored
commit 0bde59c1 upstream. In vhost_vdpa_set_config_call() if eventfd_ctx_fdget() fails the 'v->config_ctx' contains an error instead of a valid pointer. Since we consider 'v->config_ctx' valid if it is not NULL, we should set it to NULL in this case to avoid to use an invalid pointer in other functions such as vhost_vdpa_config_put(). Fixes: 776f3950 ("vhost_vdpa: Support config interrupt in vdpa") Cc: lingshan.zhu@intel.com Cc: stable@vger.kernel.org Signed-off-by:
Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20210311135257.109460-3-sgarzare@redhat.com Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stefano Garzarella authored
commit f6bbf001 upstream. When the 'v->config_ctx' eventfd_ctx reference is released we didn't set it to NULL. So if the same character device (e.g. /dev/vhost-vdpa-0) is re-opened, the 'v->config_ctx' is invalid and calling again vhost_vdpa_config_put() causes use-after-free issues like the following refcount_t underflow: refcount_t: underflow; use-after-free. WARNING: CPU: 2 PID: 872 at lib/refcount.c:28 refcount_warn_saturate+0xae/0xf0 RIP: 0010:refcount_warn_saturate+0xae/0xf0 Call Trace: eventfd_ctx_put+0x5b/0x70 vhost_vdpa_release+0xcd/0x150 [vhost_vdpa] __fput+0x8e/0x240 ____fput+0xe/0x10 task_work_run+0x66/0xa0 exit_to_user_mode_prepare+0x118/0x120 syscall_exit_to_user_mode+0x21/0x50 ? __x64_sys_close+0x12/0x40 do_syscall_64+0x45/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 776f3950 ("vhost_vdpa: Support config interrupt in vdpa") Cc: lingshan.zhu@intel.com Cc: stable@vger.kernel.org Signed-off-by:
Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20210311135257.109460-2-sgarzare@redhat.com Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Reviewed-by:
Zhu Lingshan <lingshan.zhu@intel.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Sterba authored
commit 34e49994 upstream. The free space tree bitmap slab cache is created with SLAB_RED_ZONE but that's a debugging flag and not always enabled. Also the other slabs are created with at least SLAB_MEM_SPREAD that we want as well to average the memory placement cost. Reported-by:
Vlastimil Babka <vbabka@suse.cz> Fixes: 3acd4850 ("btrfs: fix allocation of free space cache v1 bitmap pages") CC: stable@vger.kernel.org # 5.4+ Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Filipe Manana authored
commit dbcc7d57 upstream. While resolving backreferences, as part of a logical ino ioctl call or fiemap, we can end up hitting a BUG_ON() when replaying tree mod log operations of a root, triggering a stack trace like the following: ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:1210! invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 19054 Comm: crawl_335 Tainted: G W 5.11.0-2d11c0084b02-misc-next+ #89 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:__tree_mod_log_rewind+0x3b1/0x3c0 Code: 05 48 8d 74 10 (...) RSP: 0018:ffffc90001eb70b8 EFLAGS: 00010297 RAX: 0000000000000000 RBX: ffff88812344e400 RCX: ffffffffb28933b6 RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff88812344e42c RBP: ffffc90001eb7108 R08: 1ffff11020b60a20 R09: ffffed1020b60a20 R10: ffff888105b050f9 R11: ffffed1020b60a1f R12: 00000000000000ee R13: ffff8880195520c0 R14: ffff8881bc958500 R15: ffff88812344e42c FS: 00007fd1955e8700(0000) GS:ffff8881f5600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efdb7928718 CR3: 000000010103a006 CR4: 0000000000170ee0 Call Trace: btrfs_search_old_slot+0x265/0x10d0 ? lock_acquired+0xbb/0x600 ? btrfs_search_slot+0x1090/0x1090 ? free_extent_buffer.part.61+0xd7/0x140 ? free_extent_buffer+0x13/0x20 resolve_indirect_refs+0x3e9/0xfc0 ? lock_downgrade+0x3d0/0x3d0 ? __kasan_check_read+0x11/0x20 ? add_prelim_ref.part.11+0x150/0x150 ? lock_downgrade+0x3d0/0x3d0 ? __kasan_check_read+0x11/0x20 ? lock_acquired+0xbb/0x600 ? __kasan_check_write+0x14/0x20 ? do_raw_spin_unlock+0xa8/0x140 ? rb_insert_color+0x30/0x360 ? prelim_ref_insert+0x12d/0x430 find_parent_nodes+0x5c3/0x1830 ? resolve_indirect_refs+0xfc0/0xfc0 ? lock_release+0xc8/0x620 ? fs_reclaim_acquire+0x67/0xf0 ? lock_acquire+0xc7/0x510 ? lock_downgrade+0x3d0/0x3d0 ? lockdep_hardirqs_on_prepare+0x160/0x210 ? lock_release+0xc8/0x620 ? fs_reclaim_acquire+0x67/0xf0 ? lock_acquire+0xc7/0x510 ? poison_range+0x38/0x40 ? unpoison_range+0x14/0x40 ? trace_hardirqs_on+0x55/0x120 btrfs_find_all_roots_safe+0x142/0x1e0 ? find_parent_nodes+0x1830/0x1830 ? btrfs_inode_flags_to_xflags+0x50/0x50 iterate_extent_inodes+0x20e/0x580 ? tree_backref_for_extent+0x230/0x230 ? lock_downgrade+0x3d0/0x3d0 ? read_extent_buffer+0xdd/0x110 ? lock_downgrade+0x3d0/0x3d0 ? __kasan_check_read+0x11/0x20 ? lock_acquired+0xbb/0x600 ? __kasan_check_write+0x14/0x20 ? _raw_spin_unlock+0x22/0x30 ? __kasan_check_write+0x14/0x20 iterate_inodes_from_logical+0x129/0x170 ? iterate_inodes_from_logical+0x129/0x170 ? btrfs_inode_flags_to_xflags+0x50/0x50 ? iterate_extent_inodes+0x580/0x580 ? __vmalloc_node+0x92/0xb0 ? init_data_container+0x34/0xb0 ? init_data_container+0x34/0xb0 ? kvmalloc_node+0x60/0x80 btrfs_ioctl_logical_to_ino+0x158/0x230 btrfs_ioctl+0x205e/0x4040 ? __might_sleep+0x71/0xe0 ? btrfs_ioctl_get_supported_features+0x30/0x30 ? getrusage+0x4b6/0x9c0 ? __kasan_check_read+0x11/0x20 ? lock_release+0xc8/0x620 ? __might_fault+0x64/0xd0 ? lock_acquire+0xc7/0x510 ? lock_downgrade+0x3d0/0x3d0 ? lockdep_hardirqs_on_prepare+0x210/0x210 ? lockdep_hardirqs_on_prepare+0x210/0x210 ? __kasan_check_read+0x11/0x20 ? do_vfs_ioctl+0xfc/0x9d0 ? ioctl_file_clone+0xe0/0xe0 ? lock_downgrade+0x3d0/0x3d0 ? lockdep_hardirqs_on_prepare+0x210/0x210 ? __kasan_check_read+0x11/0x20 ? lock_release+0xc8/0x620 ? __task_pid_nr_ns+0xd3/0x250 ? lock_acquire+0xc7/0x510 ? __fget_files+0x160/0x230 ? __fget_light+0xf2/0x110 __x64_sys_ioctl+0xc3/0x100 do_syscall_64+0x37/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fd1976e2427 Code: 00 00 90 48 8b 05 (...) RSP: 002b:00007fd1955e5cf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fd1955e5f40 RCX: 00007fd1976e2427 RDX: 00007fd1955e5f48 RSI: 00000000c038943b RDI: 0000000000000004 RBP: 0000000001000000 R08: 0000000000000000 R09: 00007fd1955e6120 R10: 0000557835366b00 R11: 0000000000000246 R12: 0000000000000004 R13: 00007fd1955e5f48 R14: 00007fd1955e5f40 R15: 00007fd1955e5ef8 Modules linked in: ---[ end trace ec8931a1c36e57be ]--- (gdb) l *(__tree_mod_log_rewind+0x3b1) 0xffffffff81893521 is in __tree_mod_log_rewind (fs/btrfs/ctree.c:1210). 1205 * the modification. as we're going backwards, we do the 1206 * opposite of each operation here. 1207 */ 1208 switch (tm->op) { 1209 case MOD_LOG_KEY_REMOVE_WHILE_FREEING: 1210 BUG_ON(tm->slot < n); 1211 fallthrough; 1212 case MOD_LOG_KEY_REMOVE_WHILE_MOVING: 1213 case MOD_LOG_KEY_REMOVE: 1214 btrfs_set_node_key(eb, &tm->key, tm->slot); Here's what happens to hit that BUG_ON(): 1) We have one tree mod log user (through fiemap or the logical ino ioctl), with a sequence number of 1, so we have fs_info->tree_mod_seq == 1; 2) Another task is at ctree.c:balance_level() and we have eb X currently as the root of the tree, and we promote its single child, eb Y, as the new root. Then, at ctree.c:balance_level(), we call: tree_mod_log_insert_root(eb X, eb Y, 1); 3) At tree_mod_log_insert_root() we create tree mod log elements for each slot of eb X, of operation type MOD_LOG_KEY_REMOVE_WHILE_FREEING each with a ->logical pointing to ebX->start. These are placed in an array named tm_list. Lets assume there are N elements (N pointers in eb X); 4) Then, still at tree_mod_log_insert_root(), we create a tree mod log element of operation type MOD_LOG_ROOT_REPLACE, ->logical set to ebY->start, ->old_root.logical set to ebX->start, ->old_root.level set to the level of eb X and ->generation set to the generation of eb X; 5) Then tree_mod_log_insert_root() calls tree_mod_log_free_eb() with tm_list as argument. After that, tree_mod_log_free_eb() calls __tree_mod_log_insert() for each member of tm_list in reverse order, from highest slot in eb X, slot N - 1, to slot 0 of eb X; 6) __tree_mod_log_insert() sets the sequence number of each given tree mod log operation - it increments fs_info->tree_mod_seq and sets fs_info->tree_mod_seq as the sequence number of the given tree mod log operation. This means that for the tm_list created at tree_mod_log_insert_root(), the element corresponding to slot 0 of eb X has the highest sequence number (1 + N), and the element corresponding to the last slot has the lowest sequence number (2); 7) Then, after inserting tm_list's elements into the tree mod log rbtree, the MOD_LOG_ROOT_REPLACE element is inserted, which gets the highest sequence number, which is N + 2; 8) Back to ctree.c:balance_level(), we free eb X by calling btrfs_free_tree_block() on it. Because eb X was created in the current transaction, has no other references and writeback did not happen for it, we add it back to the free space cache/tree; 9) Later some other task T allocates the metadata extent from eb X, since it is marked as free space in the space cache/tree, and uses it as a node for some other btree; 10) The tree mod log user task calls btrfs_search_old_slot(), which calls get_old_root(), and finally that calls __tree_mod_log_oldest_root() with time_seq == 1 and eb_root == eb Y; 11) First iteration of the while loop finds the tree mod log element with sequence number N + 2, for the logical address of eb Y and of type MOD_LOG_ROOT_REPLACE; 12) Because the operation type is MOD_LOG_ROOT_REPLACE, we don't break out of the loop, and set root_logical to point to tm->old_root.logical which corresponds to the logical address of eb X; 13) On the next iteration of the while loop, the call to tree_mod_log_search_oldest() returns the smallest tree mod log element for the logical address of eb X, which has a sequence number of 2, an operation type of MOD_LOG_KEY_REMOVE_WHILE_FREEING and corresponds to the old slot N - 1 of eb X (eb X had N items in it before being freed); 14) We then break out of the while loop and return the tree mod log operation of type MOD_LOG_ROOT_REPLACE (eb Y), and not the one for slot N - 1 of eb X, to get_old_root(); 15) At get_old_root(), we process the MOD_LOG_ROOT_REPLACE operation and set "logical" to the logical address of eb X, which was the old root. We then call tree_mod_log_search() passing it the logical address of eb X and time_seq == 1; 16) Then before calling tree_mod_log_search(), task T adds a key to eb X, which results in adding a tree mod log operation of type MOD_LOG_KEY_ADD to the tree mod log - this is done at ctree.c:insert_ptr() - but after adding the tree mod log operation and before updating the number of items in eb X from 0 to 1... 17) The task at get_old_root() calls tree_mod_log_search() and gets the tree mod log operation of type MOD_LOG_KEY_ADD just added by task T. Then it enters the following if branch: if (old_root && tm && tm->op != MOD_LOG_KEY_REMOVE_WHILE_FREEING) { (...) } (...) Calls read_tree_block() for eb X, which gets a reference on eb X but does not lock it - task T has it locked. Then it clones eb X while it has nritems set to 0 in its header, before task T sets nritems to 1 in eb X's header. From hereupon we use the clone of eb X which no other task has access to; 18) Then we call __tree_mod_log_rewind(), passing it the MOD_LOG_KEY_ADD mod log operation we just got from tree_mod_log_search() in the previous step and the cloned version of eb X; 19) At __tree_mod_log_rewind(), we set the local variable "n" to the number of items set in eb X's clone, which is 0. Then we enter the while loop, and in its first iteration we process the MOD_LOG_KEY_ADD operation, which just decrements "n" from 0 to (u32)-1, since "n" is declared with a type of u32. At the end of this iteration we call rb_next() to find the next tree mod log operation for eb X, that gives us the mod log operation of type MOD_LOG_KEY_REMOVE_WHILE_FREEING, for slot 0, with a sequence number of N + 1 (steps 3 to 6); 20) Then we go back to the top of the while loop and trigger the following BUG_ON(): (...) switch (tm->op) { case MOD_LOG_KEY_REMOVE_WHILE_FREEING: BUG_ON(tm->slot < n); fallthrough; (...) Because "n" has a value of (u32)-1 (4294967295) and tm->slot is 0. Fix this by taking a read lock on the extent buffer before cloning it at ctree.c:get_old_root(). This should be done regardless of the extent buffer having been freed and reused, as a concurrent task might be modifying it (while holding a write lock on it). Reported-by:
Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Link: https://lore.kernel.org/linux-btrfs/20210227155037.GN28049@hungrycats.org/ Fixes: 834328a8 ("Btrfs: tree mod log's old roots could still be part of the tree") CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chao Yu authored
commit 6980d29c upstream. In zonefs_open_zone(), if opened zone count is larger than .s_max_open_zones threshold, we missed to recover .i_wr_refcnt, fix this. Fixes: b5c00e97 ("zonefs: open/close zone on file open/close") Cc: <stable@vger.kernel.org> Signed-off-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Damien Le Moal authored
commit 1601ea06 upstream. The sequential write constraint of sequential zone file prevent their use as swap files. Only allow conventional zone files to be used as swap files. Fixes: 8dcc1a9d ("fs: New zonefs file system") Cc: <stable@vger.kernel.org> Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Damien Le Moal authored
commit ebfd68cd upstream. zonefs updates the size of a sequential zone file inode only on completion of direct writes. When executing asynchronous append writes (with a file open with O_APPEND or using RWF_APPEND), the use of the current inode size in generic_write_checks() to set an iocb offset thus leads to unaligned write if an application issues an append write operation with another write already being executed. Fix this problem by introducing zonefs_write_checks() as a modified version of generic_write_checks() using the file inode wp_offset for an append write iocb offset. Also introduce zonefs_write_check_limits() to replace generic_write_check_limits() call. This zonefs special helper makes sure that the maximum file limit used is the maximum size of the file being accessed. Since zonefs_write_checks() already truncates the iov_iter, the calls to iov_iter_truncate() in zonefs_file_dio_write() and zonefs_file_buffered_write() are removed. Fixes: 8dcc1a9d ("fs: New zonefs file system") Cc: <stable@vger.kernel.org> Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Niklas Schnelle authored
commit 0b13525c upstream. In commit 05bc1be6 ("s390/pci: create zPCI bus") we removed the pci_dev_put() call matching the earlier pci_get_slot() done as part of __zpci_event_availability(). This was based on the wrong understanding that the device_put() done as part of pci_destroy_device() would counter the pci_get_slot() when it only counters the initial reference. This same understanding and existing bad example also lead to not doing a pci_dev_put() in zpci_remove_device(). Since releasing the PCI devices, unlike releasing the PCI slot, does not print any debug message for testing I added one in pci_release_dev(). This revealed that we are indeed leaking the PCI device on PCI hotunplug. Further testing also revealed another missing pci_dev_put() in disable_slot(). Fix this by adding the missing pci_dev_put() in disable_slot() and fix zpci_remove_device() with the correct pci_dev_put() calls. Also instead of calling pci_get_slot() in __zpci_event_availability() to determine if a PCI device is registered and then doing the same again in zpci_remove_device() do this once in zpci_remove_device() which makes sure that the pdev in __zpci_event_availability() is only used for the result of pci_scan_single_device() which does not need a reference count decremnt as its ownership goes to the PCI bus. Also move the check if zdev->zbus->bus is set into zpci_remove_device() since it may be that we're removing a device with devfn != 0 which never had a PCI bus. So we can still set the pdev->error_state to indicate that the device is not usable anymore, add a flag to set the error state. Fixes: 05bc1be6 ("s390/pci: create zPCI bus") Cc: <stable@vger.kernel.org> # 5.8+: e1bff843 s390/pci: remove superfluous zdev->zbus check Cc: <stable@vger.kernel.org> # 5.8+: ba764dd7 s390/pci: refactor zpci_create_device() Cc: <stable@vger.kernel.org> # 5.8+ Reviewed-by:
Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by:
Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Niklas Schnelle authored
commit e1bff843 upstream. Checking zdev->zbus for NULL in __zpci_event_availability() is superfluous as it can never be NULL at this point. While harmless this check causes smatch warnings because we later access zdev->zbus with only having checked zdev != NULL which is sufficient. The reason zdev->zbus can never be NULL is since with zdev != NULL given we know the zdev came from get_zdev_by_fid() and thus the zpci_list. Now on first glance at zpci_create_device() one may assume that there is a window where the zdev is in the list without a zdev, however this window can't overlap with __zpci_event_availability() as zpci_create_device() either runs on the same kthread as part of availability events, or during the initial CLP List PCI at which point the __zpci_event_availability() is not yet called as zPCI is not yet initialized. Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Niklas Schnelle authored
commit ba764dd7 upstream. Currently zpci_create_device() is only called in clp_add_pci_device() which allocates the memory for the struct zpci_dev being created. There is little separation of concerns as only both functions together can create a zpci_dev and the only CLP specific code in clp_add_pci_device() is a call to clp_query_pci_fn(). Improve this by removing clp_add_pci_device() and refactor zpci_create_device() such that it alone creates and initializes the zpci_dev given the FID and Function Handle. For this we need to make clp_query_pci_fn() non-static. While at it remove the function handle parameter since we can just take that from the zpci_dev. Also move adding to the zpci_list to after the zdev has been fully created which eliminates a window where a partially initialized zdev can be found by get_zdev_by_fid(). Acked-by:
Pierre Morel <pmorel@linux.ibm.com> Signed-off-by:
Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gerald Schaefer authored
commit d54cb7d5 upstream. Commit 152e9b86 ("s390/vtime: steal time exponential moving average") inadvertently changed the input value for account_steal_time() from "cputime_to_nsecs(steal)" to just "steal", resulting in broken increased steal time accounting. Fix this by changing it back to "cputime_to_nsecs(steal)". Fixes: 152e9b86 ("s390/vtime: steal time exponential moving average") Cc: <stable@vger.kernel.org> # 5.1 Reported-by:
Sabine Forkel <sabine.forkel@de.ibm.com> Reviewed-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rafael J. Wysocki authored
commit 0cab893f upstream. Revert commit 44cc89f7 ("PM: runtime: Update device status before letting suppliers suspend") that introduced a race condition into __rpm_callback() which allowed a concurrent rpm_resume() to run and resume the device prematurely after its status had been changed to RPM_SUSPENDED by __rpm_callback(). Fixes: 44cc89f7 ("PM: runtime: Update device status before letting suppliers suspend") Link: https://lore.kernel.org/linux-pm/24dfb6fc-5d54-6ee2-9195-26428b7ecf8a@intel.com/ Reported-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: 4.10+ <stable@vger.kernel.org> # 4.10+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jeremy Szu authored
commit 53b861be upstream. The HP EliteBook 850 G8 Notebook PC is using ALC285 codec which is using 0x04 to control mute LED and 0x01 to control micmute LED. Therefore, add a quirk to make it works. Signed-off-by:
Jeremy Szu <jeremy.szu@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210316094236.89028-1-jeremy.szu@canonical.com Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jeremy Szu authored
commit e7d66cf7 upstream. The HP EliteBook 840 G8 Notebook PC is using ALC236 codec which is using 0x02 to control mute LED and 0x01 to control micmute LED. Therefore, add a quirk to make it works. Signed-off-by:
Jeremy Szu <jeremy.szu@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210316074626.79895-1-jeremy.szu@canonical.com Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jeremy Szu authored
commit ca688339 upstream. The HP EliteBook 840 G8 Notebook PC is using ALC285 codec which is using 0x04 to control mute LED and 0x01 to control micmute LED. Therefore, add a quirk to make it works. Signed-off-by:
Jeremy Szu <jeremy.szu@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210316065452.75659-1-jeremy.szu@canonical.com Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xiaoliang Yu authored
commit e1c86210 upstream. There is another fix for headset-mic problem on Redmibook (1d72:1602), it also works on Redmibook Air (1d72:1947), which has the same issue. Signed-off-by:
Xiaoliang Yu <yxl_22@outlook.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/TYBP286MB02856DC016849DEA0F9B6A37EE6F9@TYBP286MB0285.JPNP286.PROD.OUTLOOK.COM Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hui Wang authored
commit 2bf44e0e upstream. Recently we found the micmute led init state is not correct after freshly installing the ubuntu linux on a Lenovo AIO machine. The internal mic is not muted, but the micmute led is on and led mode is 'follow mute'. If we mute internal mic, the led is keeping on, then unmute the internal mic, the led is off. And from then on, the micmute led will work correctly. So the micmute led init state is not correct. The led is controlled by codec gpio (ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY), in the patch_realtek, the gpio data is set to 0x4 initially and the led is on with this data. In the hda_generic, the led_value is set to 0 initially, suppose users set the 'capture switch' to on from user space and the micmute led should change to be off with this operation, but the check "if (val == spec->micmute_led.led_value)" in the call_micmute_led_update() will skip the led setting. To guarantee the led state will be set by the 1st time of changing "Capture Switch", set -1 to the init led_value. Cc: <stable@vger.kernel.org> Signed-off-by:
Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20210312041408.3776-1-hui.wang@canonical.com Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-