- Jun 08, 2016
-
-
Wu Fengguang authored
net/rxrpc/rxkad.c:1165:1-3: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci CC: David Howells <dhowells@redhat.com> Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Sowmini Varadhan says: ==================== RDS: TCP: socket locking RDS packet assembly fixes This three part patchset fixes bugs in synchronization between rds_tcp_accept_one() and the rds-tcp send/recv path. Patch 1 ensures that the lock_sock() is taken appropriately and the RDS datagram reassembly state is reset to synchronize with the receive path. Patch 2 ensures that partially sent RDS datagrams will get retransmitted after rds_tcp_accept_one() switches sockets. Patch 3 fixes a race window which would prematurely re-enable rds_send_xmit() before the rds_tcp_connection setup has been completed in rds_tcp_accept_one(). ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sowmini Varadhan authored
The send path needs to be quiesced before resetting callbacks from rds_tcp_accept_one(), and commit eb192840 ("RDS:TCP: Synchronize rds_tcp_accept_one with rds_send_xmit when resetting t_sock") achieves this using the c_state and RDS_IN_XMIT bit following the pattern used by rds_conn_shutdown(). However this leaves the possibility of a race window as shown in the sequence below take t_conn_lock in rds_tcp_conn_connect send outgoing syn to peer drop t_conn_lock in rds_tcp_conn_connect incoming from peer triggers rds_tcp_accept_one, conn is marked CONNECTING wait for RDS_IN_XMIT to quiesce any rds_send_xmit threads call rds_tcp_reset_callbacks [.. race-window where incoming syn-ack can cause the conn to be marked UP from rds_tcp_state_change ..] lock_sock called from rds_tcp_reset_callbacks, and we set t_sock to null As soon as the conn is marked UP in the race-window above, rds_send_xmit() threads will proceed to rds_tcp_xmit and may encounter a null-pointer deref on the t_sock. Given that rds_tcp_state_change() is invoked in softirq context, whereas rds_tcp_reset_callbacks() is in workq context, and testing for RDS_IN_XMIT after lock_sock could result in a deadlock with tcp_sendmsg, this commit fixes the race by using a new c_state, RDS_TCP_RESETTING, which will prevent a transition to RDS_CONN_UP from rds_tcp_state_change(). Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sowmini Varadhan authored
When we switch a connection's sockets in rds_tcp_rest_callbacks, any partially sent datagram must be retransmitted on the new socket so that the receiver can correctly reassmble the RDS datagram. Use rds_send_reset() which is designed for this purpose. Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sowmini Varadhan authored
When rds_tcp_accept_one() has to replace the existing tcp socket with a newer tcp socket (duelling-syn resolution), it must lock_sock() to suppress the rds_tcp_data_recv() path while callbacks are being changed. Also, existing RDS datagram reassembly state must be reset, so that the next datagram on the new socket does not have corrupted state. Similarly when resetting the newly accepted socket, appropriate locks and synchronization is needed. This commit ensures correct synchronization by invoking kernel_sock_shutdown to reset a newly accepted sock, and by taking appropriate lock_sock()s (for old and new sockets) when resetting existing callbacks. Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
My prior attempt to fix the backlogs of parents failed. If we return NET_XMIT_CN, our parents wont increase their backlog, so our qdisc_tree_reduce_backlog() should take this into account. v2: Florian Westphal pointed out that we could drop the packet, so we need to save qdisc_pkt_len(skb) in a temp variable before calling fq_codel_drop() Fixes: 9d18562a ("fq_codel: add batch ability to fq_codel_drop()") Fixes: 2ccccf5f ("net_sched: update hierarchical backlog too") Reported-by:
Stas Nichiporovich <stasn77@gmail.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
In bpf_perf_event_read() and bpf_perf_event_output(), we must use READ_ONCE() for fetching the struct file pointer, which could get updated concurrently, so we must prevent the compiler from potential refetching. We already do this with tail calls for fetching the related bpf_prog, but not so on stored perf events. Semantics for both are the same with regards to updates. Fixes: a43eec30 ("bpf: introduce bpf_perf_event_output() helper") Fixes: 35578d79 ("bpf: Implement function bpf_perf_event_read() that get the selected hardware PMU conuter") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Jun 07, 2016
-
-
WANG Cong authored
For gso_skb we only update qlen, backlog should be updated too. Note, it is correct to just update these stats at one layer, because the gso_skb is cached there. Reported-by:
Stas Nichiporovich <stasn77@gmail.com> Fixes: 2ccccf5f ("net_sched: update hierarchical backlog too") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Helge Deller authored
Commit 538950a1 ("soreuseport: setsockopt SO_ATTACH_REUSEPORT_[CE]BPF") missed to add the compat case for the SO_ATTACH_REUSEPORT_CBPF option. Signed-off-by:
Helge Deller <deller@gmx.de> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Helge Deller authored
This fixes the following compiler warnings when compiling the reuseport_bpf testcase on a 32 bit platform: reuseport_bpf.c: In function ‘attach_ebpf’: reuseport_bpf.c:114:15: warning: cast from pointer to integer of ifferent size [-Wpointer-to-int-cast] Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Jun 06, 2016
-
-
Michal Schmidt authored
Since implementing VLAN filtering in commit 05cc5a39 ("bnx2x: add vlan filtering offload") bnx2x refuses to add a VLAN while the interface is down: # ip link add link enp3s0f0 enp3s0f0_10 type vlan id 10 RTNETLINK answers: Bad address and in dmesg (with bnx2x.debug=0x20): bnx2x: [bnx2x_vlan_rx_add_vid:12941(enp3s0f0)]Ignoring VLAN configuration the interface is down Other drivers have no problem with this. Fix this peculiar behavior in the following way: - Accept requests to add/kill VID regardless of the device state. Maintain the requested list of VIDs in the bp->vlan_reg list. - If the device is up, try to configure the VID list into the hardware. If we run out of VLAN credits or encounter a failure configuring an entry, fall back to accepting all VLANs. If we successfully configure all entries from the list, turn the fallback off. - Use the same code for reconfiguring VLANs during NIC load. Signed-off-by:
Michal Schmidt <mschmidt@redhat.com> Acked-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Jun 05, 2016
-
-
David S. Miller authored
Merge tag 'wireless-drivers-for-davem-2016-06-04' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.7 brcmfmac * add fallback RSSI report for devices that do not report per-chain values * fix a null pointer derefence regression on PCIe full dongle devices rtlwifi * fix scheduling while atomic regression from commit 49f86ec2 MAINTAINERS * add file patterns for wireless device tree bindings ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Jun 04, 2016
-
-
Geert Uytterhoeven authored
Submitters of device tree binding documentation may forget to CC the subsystem maintainer if this is missing. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
David S. Miller authored
John Crispin says: ==================== net-next: mediatek: improve phy support The current driver did not handle the RGMII delay modes and asymmetric flow control properly. The mii_bus is not freed properly. Also add support for fixed-phy allowing the driver to work on SoCs that have an internal gigabit switch. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
John Crispin authored
If an external Gigabit PHY is connected to either of the MACs we need to be able to tell the PHY to use a delay. Not doing so will result in heavy packet loss and/or data corruption when using PHYs such as the IC+ IP1001. We tell the PHY which MII delay mode to use via the devictree. The ethernet driver needs to be adapted to handle all 3 rgmii-*id modes in the same way as normal rgmii when setting up the MAC. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
John Crispin <john@phrozen.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
John Crispin authored
The MT7623 SoC has a builtin gigabit switch. If we want to use it, GMAC1 needs to be configured using a fixed link speed and flow control settings. The easiest way to do this is to used the fixed-phy driver, allowing us to reuse the existing mdio polling code to setup the MAC. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
John Crispin <john@phrozen.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
John Crispin authored
The current code will not setup the PHYs advertisement features correctly. Fix this and properly advertise Gigabit features and properly handle asymmetric pause frames. Signed-off-by:
Sean Wang <keyhaede@gmail.com> Signed-off-by:
John Crispin <john@phrozen.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
John Crispin authored
The driver currently uses kfree() to clear the mii_bus. This is not the correct way to clear the memory and mdiobus_free() should be used instead. This patch fixes the two instances where this happens in the driver. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
John Crispin <john@phrozen.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ivan Khoronzhuk authored
The rx-usecs shouldn't be changed while interface down/up. Currently, for instance, if it's set to 100us, after interface down/up it's 500us. It's a hidden bug that can lead to lavish interrupt pacing time increasing while "down/up" up to max value. Steps to reproduce: - set rx-usecs to be 100us - down/up interface - read new unexpected rx-usecs Signed-off-by:
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Reviewed-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yangbo Lu authored
When the transmit hardware timestamping is enabled, an additional TxBD would be added and would be set as the last TxBD with TXBD_LAST and TXBD_INTERRUPT. However this has been broken by a patch recently. This made the software couldn't get transmit hardware timestamps and resulted in call trace. So, this patch is to fix this issue. Fixes: 48963b44 ("gianfar: Remove redundant ops for do_tstamp from xmit()") Signed-off-by:
Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
WANG Cong authored
Fixes: 2ccccf5f ("net_sched: update hierarchical backlog too") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
WANG Cong authored
Fixes: 2ccccf5f ("net_sched: update hierarchical backlog too") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
WANG Cong authored
Fixes: 2ccccf5f ("net_sched: update hierarchical backlog too") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
WANG Cong authored
We need to update backlog too when we update qlen. Joint work with Stas. Reported-by:
Stas Nichiporovich <stasn77@gmail.com> Tested-by:
Stas Nichiporovich <stasn77@gmail.com> Fixes: 2ccccf5f ("net_sched: update hierarchical backlog too") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
WANG Cong authored
hfsc updates backlog lazily, that is only when we dump the stats. This is problematic after we begin to update backlog in qdisc_tree_reduce_backlog(). Reported-by:
Stas Nichiporovich <stasn77@gmail.com> Tested-by:
Stas Nichiporovich <stasn77@gmail.com> Fixes: 2ccccf5f ("net_sched: update hierarchical backlog too") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Jun 03, 2016
-
-
Franky Lin authored
A regression was introduced in commit 9c349892 ("brcmfmac: revise handling events in receive path") which moves eth_type_trans() call to brcmf_rx_frame(). Msgbuf layer doesn't use brcmf_rx_frame() but invokes brcmf_netif_rx() directly. In such case the Ethernet header was not stripped out resulting in null pointer dereference in the networking stack. BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 IP: [<ffffffff814c3ce6>] enqueue_to_backlog+0x56/0x260 PGD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: fuse ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 xt_addrtype [...] rtsx_pci scsi_mod usbcore usb_common i8042 serio nvme nvme_core CPU: 7 PID: 1340 Comm: irq/136-brcmf_p Not tainted 4.7.0-rc1-mainline #1 Hardware name: Dell Inc. XPS 15 9550/0N7TVV, BIOS 01.02.00 04/07/2016 task: ffff8804a0c5bd00 ti: ffff88049e124000 task.ti: ffff88049e124000 RIP: 0010:[<ffffffff814c3ce6>] [<ffffffff814c3ce6>] enqueue_to_backlog+0x56/0x260 RSP: 0018:ffff88049e127ca0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff8804bddd7c40 RCX: 000000000000002f RDX: 0000000000000000 RSI: 0000000000000007 RDI: ffff8804bddd7d4c RBP: ffff88049e127ce8 R08: 0000000000000000 R09: 0000000000000000 R10: ffff8804bddd12c0 R11: 000000000000149e R12: 0000000000017c40 R13: ffff88049e127d08 R14: ffff8804a9bd6d00 R15: ffff8804bddd7d4c FS: 0000000000000000(0000) GS:ffff8804bddc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000048 CR3: 0000000001806000 CR4: 00000000003406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Stack: ffff8804bdddad00 ffff8804ad089e00 0000000000000000 0000000000000282 0000000000000000 ffff8804a9bd6d00 ffff8804a1b27e00 ffff8804a9bd6d00 ffff88002ee88000 ffff88049e127d28 ffffffff814c3f3b ffffffff81311fc3 Call Trace: [<ffffffff814c3f3b>] netif_rx_internal+0x4b/0x170 [<ffffffff81311fc3>] ? swiotlb_tbl_unmap_single+0xf3/0x120 [<ffffffff814c5467>] netif_rx_ni+0x27/0xc0 [<ffffffffa08519e9>] brcmf_netif_rx+0x49/0x70 [brcmfmac] [<ffffffffa08564d4>] brcmf_msgbuf_process_rx+0x2b4/0x570 [brcmfmac] [<ffffffff81020017>] ? __xen_set_pgd_hyper+0x57/0xd0 [<ffffffff810d60b0>] ? irq_forced_thread_fn+0x70/0x70 [<ffffffffa0857381>] brcmf_proto_msgbuf_rx_trigger+0x31/0xe0 [brcmfmac] [<ffffffffa0861e8f>] brcmf_pcie_isr_thread+0x7f/0x110 [brcmfmac] [<ffffffff810d60d0>] irq_thread_fn+0x20/0x50 [<ffffffff810d63ad>] irq_thread+0x12d/0x1c0 [<ffffffff815d07d5>] ? __schedule+0x2f5/0x7a0 [<ffffffff810d61d0>] ? wake_threads_waitq+0x30/0x30 [<ffffffff810d6280>] ? irq_thread_dtor+0xb0/0xb0 [<ffffffff81098ea8>] kthread+0xd8/0xf0 [<ffffffff815d4b7f>] ret_from_fork+0x1f/0x40 [<ffffffff81098dd0>] ? kthread_worker_fn+0x170/0x170 Code: 1c f5 60 9a 8e 81 9c 58 0f 1f 44 00 00 48 89 45 d0 fa 66 0f 1f 44 00 00 4c 8d bb 0c 01 00 00 4c 89 ff e8 5e 08 11 00 49 8b 56 20 <48> 8b 52 48 83 e2 01 74 10 8b 8b 08 01 00 00 8b 15 59 c5 42 00 RIP [<ffffffff814c3ce6>] enqueue_to_backlog+0x56/0x260 RSP <ffff88049e127ca0> CR2: 0000000000000048 Fixes: 9c349892 ("brcmfmac: revise handling events in receive path") Reported-by:
Rafal Milecki <zajec5@gmail.com> Reported-by:
Grey Christoforo <grey@christoforo.net> Reviewed-by:
Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by:
Arend Van Spriel <arend@broadcom.com> Reviewed-by:
Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by:
Franky Lin <franky.lin@broadcom.com> [arend@broadcom.com: rephrased the commit message] Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Kangjie Lu authored
The last field "flags" of object "minfo" is not initialized. Copying this object out may leak kernel stack data. Assign 0 to it to avoid leak. Signed-off-by:
Kangjie Lu <kjlu@gatech.edu> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kangjie Lu authored
link_info.str is a char array of size 60. Memory after the NULL byte is not initialized. Sending the whole object out can cause a leak. Signed-off-by:
Kangjie Lu <kjlu@gatech.edu> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Paul Moore tracked a regression caused by a recent commit, which mistakenly assumed that sk_filter() could be avoided if socket had no current BPF filter. The intent was to avoid udp_lib_checksum_complete() overhead. But sk_filter() also checks skb_pfmemalloc() and security_sock_rcv_skb(), so better call it. Fixes: e6afc8ac ("udp: remove headers from UDP packets before queueing") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Paul Moore <paul@paul-moore.com> Tested-by:
Paul Moore <paul@paul-moore.com> Tested-by:
Stephen Smalley <sds@tycho.nsa.gov> Cc: samanthakumar <samanthakumar@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vincent Palatin authored
stmmac_mdio_reset() has been updated to use msleep rather udelay (as some PHY requires a one second delay there). It called from stmmac_resume() within the spin_lock_irqsave block atomic context triggering 'scheduling while atomic'. The stmmac_priv lock usage is not fully documented, but it seems to protect the access to the MAC registers / DMA structures rather than the MDIO bus or the PHY (which have separate locking), so we can push the spin_lock after the stmmac_mdio_reset call. Signed-off-by:
Vincent Palatin <vpalatin@chromium.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Jun 02, 2016
-
-
Arnd Bergmann authored
gcc warns about qed_fill_link possibly accessing uninitialized data: drivers/net/ethernet/qlogic/qed/qed_main.c: In function 'qed_fill_link': drivers/net/ethernet/qlogic/qed/qed_main.c:1170:35: error: 'link_caps' may be used uninitialized in this function [-Werror=maybe-uninitialized] While this warning is only about the specific case of CONFIG_QED_SRIOV being disabled but the function getting called for a VF (which should never happen), another possibility is that qed_mcp_get_*() fails without returning data. This rearranges the code so we bail out in either of the two cases and print a warning instead of accessing the uninitialized data. The qed_link_output structure remains untouched in this case, but all callers first call memset() on it, so at least we are not leaking stack data then. As discussed, we also use a compile-time check to ensure we never use any of the VF code if CONFIG_QED_SRIOV is disabled, and the PCI device table is updated to no longer bind to virtual functions in that configuration. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
priv is assigned to NULL however some of the early error exit paths to label 'free' dereference priv, causing a null pointer dereference. Move the label 'free' to just the free_netdev statement, and add a new exit path 'free2' for the error cases were clk_disable_unprepare needs calling before the final free. Fixes issue found by CoverityScan, CID#113260 Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree, they are: 1) Fix incorrect timestamp in nfnetlink_queue introduced when addressing y2038 safe timestamp, from Florian Westphal. 2) Get rid of leftover conntrack definition from the previous merge window, oneliner from Florian. 3) Make nf_queue handler pernet to resolve race on dereferencing the hook state structure with netns removal, from Eric Biederman. 4) Ensure clean exit on unregistered helper ports, from Taehee Yoo. 5) Restore FLOWI_FLAG_KNOWN_NH in nf_dup_ipv6. This got lost while generalizing xt_TEE to add packet duplication support in nf_tables, from Paolo Abeni. 6) Insufficient netlink NFTA_SET_TABLE attribute check in nf_tables_getset(), from Phil Turnbull. 7) Reject helper registration on duplicated ports via modparams. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2016-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Three small fixes for the current cycle: * missing netlink attribute check in hwsim wmediumd (Martin) * fast xmit structure alignment fix (Felix) * mesh path flush/synchronisation fix (Bob) ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Jun 01, 2016
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix negative error code usage in ATM layer, from Stefan Hajnoczi. 2) If CONFIG_SYSCTL is disabled, the default TTL is not initialized properly. From Ezequiel Garcia. 3) Missing spinlock init in mvneta driver, from Gregory CLEMENT. 4) Missing unlocks in hwmb error paths, also from Gregory CLEMENT. 5) Fix deadlock on team->lock when propagating features, from Ivan Vecera. 6) Work around buffer offset hw bug in alx chips, from Feng Tang. 7) Fix double listing of SCTP entries in sctp_diag dumps, from Xin Long. 8) Various statistics bug fixes in mlx4 from Eric Dumazet. 9) Fix some randconfig build errors wrt fou ipv6 from Arnd Bergmann. 10) All of l2tp was namespace aware, but the ipv6 support code was not doing so. From Shmulik Ladkani. 11) Handle on-stack hrtimers properly in pktgen, from Guenter Roeck. 12) Propagate MAC changes properly through VLAN devices, from Mike Manning. 13) Fix memory leak in bnx2x_init_one(), from Vitaly Kuznetsov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits) sfc: Track RPS flow IDs per channel instead of per function usbnet: smsc95xx: fix link detection for disabled autonegotiation virtio_net: fix virtnet_open and virtnet_probe competing for try_fill_recv bnx2x: avoid leaking memory on bnx2x_init_one() failures fou: fix IPv6 Kconfig options openvswitch: update checksum in {push,pop}_mpls sctp: sctp_diag should dump sctp socket type net: fec: update dirty_tx even if no skb vlan: Propagate MAC address to VLANs atm: iphase: off by one in rx_pkt() atm: firestream: add more reserved strings vxlan: Accept user specified MTU value when create new vxlan link net: pktgen: Call destroy_hrtimer_on_stack() timer: Export destroy_hrtimer_on_stack() net: l2tp: Make l2tp_ip6 namespace aware Documentation: ip-sysctl.txt: clarify secure_redirects sfc: use flow dissector helpers for aRFS ieee802154: fix logic error in ieee802154_llsec_parse_dev_addr net: nps_enet: Disable interrupts before napi reschedule net/lapb: tuse %*ph to dump buffers ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc fixes from David Miller: "sparc64 mmu context allocation and trap return bug fixes" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Fix return from trap window fill crashes. sparc: Harden signal return frame checks. sparc64: Take ctx_alloc_lock properly in hugetlb_setup().
-
Jon Cooper authored
Otherwise we get confused when two flows on different channels get the same flow ID. Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Christoph Fritz authored
To detect link status up/down for connections where autonegotiation is explicitly disabled, we don't get an irq but need to poll the status register for link up/down detection. This patch adds a workqueue to poll for link status. Signed-off-by:
Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
wangyunjian authored
In function virtnet_open() and virtnet_probe(), func try_fill_recv() may be executed at the same time. VQ in virtqueue_add() has not been protected well and BUG_ON will be triggered when virito_net.ko being removed. Signed-off-by:
Yunjian Wang <wangyunjian@huawei.com> Acked-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vitaly Kuznetsov authored
bnx2x_init_bp() allocates memory with bnx2x_alloc_mem_bp() so if we fail later in bnx2x_init_one() we need to free this memory with bnx2x_free_mem_bp() to avoid leakages. E.g. I'm observing memory leaks reported by kmemleak when a failure (unrelated) happens in bnx2x_vfpf_acquire(). Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-