- Dec 20, 2018
-
-
Gustavo A. R. Silva authored
When using the nospec API, it should be taken into account that: "...if the CPU speculates past the bounds check then * array_index_nospec() will clamp the index within the range of [0, * size)." The above is part of the header for macro array_index_nospec() in linux/nospec.h Now, in this particular case, if intid evaluates to exactly VGIC_MAX_SPI or to exaclty VGIC_MAX_PRIVATE, the array_index_nospec() macro ends up returning VGIC_MAX_SPI - 1 or VGIC_MAX_PRIVATE - 1 respectively, instead of VGIC_MAX_SPI or VGIC_MAX_PRIVATE, which, based on the original logic: /* SGIs and PPIs */ if (intid <= VGIC_MAX_PRIVATE) return &vcpu->arch.vgic_cpu.private_irqs[intid]; /* SPIs */ if (intid <= VGIC_MAX_SPI) return &kvm->arch.vgic.spis[intid - VGIC_NR_PRIVATE_IRQS]; are valid values for intid. Fix this by calling array_index_nospec() macro with VGIC_MAX_PRIVATE + 1 and VGIC_MAX_SPI + 1 as arguments for its parameter size. Fixes: 41b87599 ("KVM: arm/arm64: vgic: fix possible spectre-v1 in vgic_get_irq()") Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> [dropped the SPI part which was fixed separately] Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
- Dec 18, 2018
-
-
Marc Zyngier authored
SPIs should be checked against the VMs specific configuration, and not the architectural maximum. Cc: stable@vger.kernel.org Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Christoffer Dall authored
In attempting to re-construct the logic for our stage 2 page table layout I found the reasoning in the comment explaining how we calculate the number of levels used for stage 2 page tables a bit backwards. This commit attempts to clarify the comment, to make it slightly easier to read without having the Arm ARM open on the right page. While we're at it, fixup a typo in a comment that was recently changed. Reviewed-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Julien Thierry authored
To change the active state of an MMIO, halt is requested for all vcpus of the affected guest before modifying the IRQ state. This is done by calling cond_resched_lock() in vgic_mmio_change_active(). However interrupts are disabled at this point and we cannot reschedule a vcpu. We actually don't need any of this, as kvm_arm_halt_guest ensures that all the other vcpus are out of the guest. Let's just drop that useless code. Signed-off-by:
Julien Thierry <julien.thierry@arm.com> Suggested-by:
Christoffer Dall <christoffer.dall@arm.com> Cc: stable@vger.kernel.org Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Punit Agrawal authored
KVM only supports PMD hugepages at stage 2. Now that the various page handling routines are updated, extend the stage 2 fault handling to map in PUD hugepages. Addition of PUD hugepage support enables additional page sizes (e.g., 1G with 4K granule) which can be useful on cores that support mapping larger block sizes in the TLB entries. Signed-off-by:
Punit Agrawal <punit.agrawal@arm.com> Reviewed-by:
Christoffer Dall <christoffer.dall@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> [ Replace BUG() => WARN_ON(1) for arm32 PUD helpers ] Signed-off-by:
Suzuki Poulose <suzuki.poulose@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Punit Agrawal authored
In preparation for creating larger hugepages at Stage 2, add support to the age handling notifiers for PUD hugepages when encountered. Provide trivial helpers for arm32 to allow sharing code. Signed-off-by:
Punit Agrawal <punit.agrawal@arm.com> Reviewed-by:
Christoffer Dall <christoffer.dall@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> [ Replaced BUG() => WARN_ON(1) for arm32 PUD helpers ] Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Punit Agrawal authored
In preparation for creating larger hugepages at Stage 2, extend the access fault handling at Stage 2 to support PUD hugepages when encountered. Provide trivial helpers for arm32 to allow sharing of code. Signed-off-by:
Punit Agrawal <punit.agrawal@arm.com> Reviewed-by:
Christoffer Dall <christoffer.dall@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> [ Replaced BUG() => WARN_ON(1) in PUD helpers ] Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Punit Agrawal authored
In preparation for creating PUD hugepages at stage 2, add support for detecting execute permissions on PUD page table entries. Faults due to lack of execute permissions on page table entries is used to perform i-cache invalidation on first execute. Provide trivial implementations of arm32 helpers to allow sharing of code. Signed-off-by:
Punit Agrawal <punit.agrawal@arm.com> Reviewed-by:
Christoffer Dall <christoffer.dall@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> [ Replaced BUG() => WARN_ON(1) in arm32 PUD helpers ] Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Punit Agrawal authored
In preparation for creating PUD hugepages at stage 2, add support for write protecting PUD hugepages when they are encountered. Write protecting guest tables is used to track dirty pages when migrating VMs. Also, provide trivial implementations of required kvm_s2pud_* helpers to allow sharing of code with arm32. Signed-off-by:
Punit Agrawal <punit.agrawal@arm.com> Reviewed-by:
Christoffer Dall <christoffer.dall@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> [ Replaced BUG() => WARN_ON() in arm32 pud helpers ] Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Punit Agrawal authored
Introduce helpers to abstract architectural handling of the conversion of pfn to page table entries and marking a PMD page table entry as a block entry. The helpers are introduced in preparation for supporting PUD hugepages at stage 2 - which are supported on arm64 but do not exist on arm. Signed-off-by:
Punit Agrawal <punit.agrawal@arm.com> Reviewed-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by:
Christoffer Dall <christoffer.dall@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Punit Agrawal authored
Stage 2 fault handler marks a page as executable if it is handling an execution fault or if it was a permission fault in which case the executable bit needs to be preserved. The logic to decide if the page should be marked executable is duplicated for PMD and PTE entries. To avoid creating another copy when support for PUD hugepages is introduced refactor the code to share the checks needed to mark a page table entry as executable. Signed-off-by:
Punit Agrawal <punit.agrawal@arm.com> Reviewed-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by:
Christoffer Dall <christoffer.dall@arm.com> Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Punit Agrawal authored
The code for operations such as marking the pfn as dirty, and dcache/icache maintenance during stage 2 fault handling is duplicated between normal pages and PMD hugepages. Instead of creating another copy of the operations when we introduce PUD hugepages, let's share them across the different pagesizes. Signed-off-by:
Punit Agrawal <punit.agrawal@arm.com> Reviewed-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by:
Christoffer Dall <christoffer.dall@arm.com> Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Christoffer Dall authored
When restoring the active state from userspace, we don't know which CPU was the source for the active state, and this is not architecturally exposed in any of the register state. Set the active_source to 0 in this case. In the future, we can expand on this and exposse the information as additional information to userspace for GICv2 if anyone cares. Cc: stable@vger.kernel.org Signed-off-by:
Christoffer Dall <christoffer.dall@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Mark Rutland authored
When KVM traps an unhandled sysreg/coproc access from a guest, it logs the guest PC. To aid debugging, it would be helpful to know which exception level the trap came from, along with other PSTATE/CPSR bits, so let's log the PSTATE/CPSR too. Acked-by:
Christoffer Dall <christoffer.dall@arm.com> Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Christoffer Dall authored
We recently addressed a VMID generation race by introducing a read/write lock around accesses and updates to the vmid generation values. However, kvm_arch_vcpu_ioctl_run() also calls need_new_vmid_gen() but does so without taking the read lock. As far as I can tell, this can lead to the same kind of race: VM 0, VCPU 0 VM 0, VCPU 1 ------------ ------------ update_vttbr (vmid 254) update_vttbr (vmid 1) // roll over read_lock(kvm_vmid_lock); force_vm_exit() local_irq_disable need_new_vmid_gen == false //because vmid gen matches enter_guest (vmid 254) kvm_arch.vttbr = <PGD>:<VMID 1> read_unlock(kvm_vmid_lock); enter_guest (vmid 1) Which results in running two VCPUs in the same VM with different VMIDs and (even worse) other VCPUs from other VMs could now allocate clashing VMID 254 from the new generation as long as VCPU 0 is not exiting. Attempt to solve this by making sure vttbr is updated before another CPU can observe the updated VMID generation. Cc: stable@vger.kernel.org Fixes: f0cf47d9 "KVM: arm/arm64: Close VMID generation race" Reviewed-by:
Julien Thierry <julien.thierry@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Mark Rutland authored
When we emulate a guest instruction, we don't advance the hardware singlestep state machine, and thus the guest will receive a software step exception after a next instruction which is not emulated by the host. We bodge around this in an ad-hoc fashion. Sometimes we explicitly check whether userspace requested a single step, and fake a debug exception from within the kernel. Other times, we advance the HW singlestep state rely on the HW to generate the exception for us. Thus, the observed step behaviour differs for host and guest. Let's make this simpler and consistent by always advancing the HW singlestep state machine when we skip an instruction. Thus we can rely on the hardware to generate the singlestep exception for us, and never need to explicitly check for an active-pending step, nor do we need to fake a debug exception from the guest. Cc: Peter Maydell <peter.maydell@linaro.org> Reviewed-by:
Alex Bennée <alex.bennee@linaro.org> Reviewed-by:
Christoffer Dall <christoffer.dall@arm.com> Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Mark Rutland authored
When we emulate an MMIO instruction, we advance the CPU state within decode_hsr(), before emulating the instruction effects. Having this logic in decode_hsr() is opaque, and advancing the state before emulation is problematic. It gets in the way of applying consistent single-step logic, and it prevents us from being able to fail an MMIO instruction with a synchronous exception. Clean this up by only advancing the CPU state *after* the effects of the instruction are emulated. Cc: Peter Maydell <peter.maydell@linaro.org> Reviewed-by:
Alex Bennée <alex.bennee@linaro.org> Reviewed-by:
Christoffer Dall <christoffer.dall@arm.com> Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
- Nov 26, 2018
-
-
Linus Torvalds authored
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping fixes from Christoph Hellwig: "Two dma-direct / swiotlb regressions fixes: - zero is a valid physical address on some arm boards, we can't use it as the error value - don't try to cache flush the error return value (no matter what it is)" * tag 'dma-mapping-4.20-3' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: Skip cache maintenance on map error dma-direct: Make DIRECT_MAPPING_ERROR viable for SWIOTLB
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Trond Myklebust: - Fix a NFSv4 state manager deadlock when returning a delegation - NFSv4.2 copy do not allocate memory under the lock - flexfiles: Use the correct stateid for IO in the tightly coupled case * tag 'nfs-for-4.20-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: flexfiles: use per-mirror specified stateid for IO NFSv4.2 copy do not allocate memory under the lock NFSv4: Fix a NFSv4 state manager deadlock
-
Luc Van Oostenryck authored
I'm taking over the maintainance of Sparse so add myself as maintainer and move Christopher's info to CREDITS. Signed-off-by:
Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- Nov 25, 2018
-
-
git://git.infradead.org/users/willy/linux-daxLinus Torvalds authored
Pull XArray updates from Matthew Wilcox: "We found some bugs in the DAX conversion to XArray (and one bug which predated the XArray conversion). There were a couple of bugs in some of the higher-level functions, which aren't actually being called in today's kernel, but surfaced as a result of converting existing radix tree & IDR users over to the XArray. Some of the other changes to how the higher-level APIs work were also motivated by converting various users; again, they're not in use in today's kernel, so changing them has a low probability of introducing a bug. Dan can still trigger a bug in the DAX code with hot-offline/online, and we're working on tracking that down" * tag 'xarray-4.20-rc4' of git://git.infradead.org/users/willy/linux-dax: XArray tests: Add missing locking dax: Avoid losing wakeup in dax_lock_mapping_entry dax: Fix huge page faults dax: Fix dax_unlock_mapping_entry for PMD pages dax: Reinstate RCU protection of inode dax: Make sure the unlocking entry isn't locked dax: Remove optimisation from dax_lock_mapping_entry XArray tests: Correct some 64-bit assumptions XArray: Correct xa_store_range XArray: Fix Documentation XArray: Handle NULL pointers differently for allocation XArray: Unify xa_store and __xa_store XArray: Add xa_store_bh() and xa_store_irq() XArray: Turn xa_erase into an exported function XArray: Unify xa_cmpxchg and __xa_cmpxchg XArray: Regularise xa_reserve nilfs2: Use xa_erase_irq XArray: Export __xa_foo to non-GPL modules XArray: Fix xa_for_each with a single element at 0
-
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: - revert of the high-resolution scrolling feature, as it breaks certain hardware due to incompatibilities between Logitech and Microsoft worlds. Peter Hutterer is working on a fixed implementation. Until that is finished, revert by Benjamin Tissoires. - revert of incorrect strncpy->strlcpy conversion in uhid, from David Herrmann - fix for buggy sendfile() implementation on uhid device node, from Eric Biggers - a few assorted device-ID specific quirks * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: Revert "Input: Add the `REL_WHEEL_HI_RES` event code" Revert "HID: input: Create a utility class for counting scroll events" Revert "HID: logitech: Add function to enable HID++ 1.0 "scrolling acceleration"" Revert "HID: logitech: Enable high-resolution scrolling on Logitech mice" Revert "HID: logitech: Use LDJ_DEVICE macro for existing Logitech mice" Revert "HID: logitech: fix a used uninitialized GCC warning" Revert "HID: input: simplify/fix high-res scroll event handling" HID: Add quirk for Primax PIXART OEM mice HID: i2c-hid: Disable runtime PM for LG touchscreen HID: multitouch: Add pointstick support for Cirque Touchpad HID: steam: remove input device when a hid client is running. Revert "HID: uhid: use strlcpy() instead of strncpy()" HID: uhid: forbid UHID_CREATE under KERNEL_DS or elevated privileges HID: input: Ignore battery reported by Symbol DS4308 HID: Add quirk for Microsoft PIXART OEM mouse
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Catalin Marinas:: - Fix wrong conflict resolution around CONFIG_ARM64_SSBD - Fix sparse warning on unsigned long constant * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: cpufeature: Fix mismerge of CONFIG_ARM64_SSBD block arm64: sysreg: fix sparse warnings
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Need to take mutex in ath9k_add_interface(), from Dan Carpenter. 2) Fix mt76 build without CONFIG_LEDS_CLASS, from Arnd Bergmann. 3) Fix socket wmem accounting in SCTP, from Xin Long. 4) Fix failed resume crash in ena driver, from Arthur Kiyanovski. 5) qed driver passes bytes instead of bits into second arg of bitmap_weight(). From Denis Bolotin. 6) Fix reset deadlock in ibmvnic, from Juliet Kim. 7) skb_scrube_packet() needs to scrub the fwd marks too, from Petr Machata. 8) Make sure older TCP stacks see enough dup ACKs, and avoid doing SACK compression during this period, from Eric Dumazet. 9) Add atomicity to SMC protocol cursor handling, from Ursula Braun. 10) Don't leave dangling error pointer if bpf_prog_add() fails in thunderx driver, from Lorenzo Bianconi. Also, when we unmap TSO headers, set sq->tso_hdrs to NULL. 11) Fix race condition over state variables in act_police, from Davide Caratti. 12) Disable guest csum in the presence of XDP in virtio_net, from Jason Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (64 commits) net: gemini: Fix copy/paste error net: phy: mscc: fix deadlock in vsc85xx_default_config dt-bindings: dsa: Fix typo in "probed" net: thunderx: set tso_hdrs pointer to NULL in nicvf_free_snd_queue net: amd: add missing of_node_put() team: no need to do team_notify_peers or team_mcast_rejoin when disabling port virtio-net: fail XDP set if guest csum is negotiated virtio-net: disable guest csum during XDP set net/sched: act_police: add missing spinlock initialization net: don't keep lonely packets forever in the gro hash net/ipv6: re-do dad when interface has IFF_NOARP flag change packet: copy user buffers before orphan or clone ibmvnic: Update driver queues after change in ring size support ibmvnic: Fix RX queue buffer cleanup net: thunderx: set xdp_prog to NULL if bpf_prog_add fails net/dim: Update DIM start sample after each DIM iteration net: faraday: ftmac100: remove netif_running(netdev) check before disabling interrupts net/smc: use after free fix in smc_wr_tx_put_slot() net/smc: atomic SMCD cursor handling net/smc: add SMC-D shutdown signal ...
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: "Dave and I have continued our work fixing corruption problems that can be found when running long-term burn-in exercisers on xfs. Here are some patches fixing most of the problems, but there will likely be more. :/ - Numerous corruption fixes for copy on write - Numerous corruption fixes for blocksize < pagesize writes - Don't miscalculate AG reservations for small final AGs - Fix page cache truncation to work properly for reflink and extent shifting - Fix use-after-free when retrying failed inode/dquot buffer logging - Fix corruptions seen when using copy_file_range in directio mode" * tag 'xfs-4.20-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: iomap: readpages doesn't zero page tail beyond EOF vfs: vfs_dedupe_file_range() doesn't return EOPNOTSUPP iomap: dio data corruption and spurious errors when pipes fill iomap: sub-block dio needs to zeroout beyond EOF iomap: FUA is wrong for DIO O_DSYNC writes into unwritten extents xfs: delalloc -> unwritten COW fork allocation can go wrong xfs: flush removing page cache in xfs_reflink_remap_prep xfs: extent shifting doesn't fully invalidate page cache xfs: finobt AG reserves don't consider last AG can be a runt xfs: fix transient reference count error in xfs_buf_resubmit_failed_buffers xfs: uncached buffer tracing needs to print bno xfs: make xfs_file_remap_range() static xfs: fix shared extent data corruption due to missing cow reservation
-
- Nov 24, 2018
-
-
Andreas Fiedler authored
The TX stats should be started with the tx_stats_syncp, there seems to be a copy/paste error in the driver. Signed-off-by:
Andreas Fiedler <andreas.fiedler@gmx.net> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Quentin Schulz authored
The vsc85xx_default_config function called in the vsc85xx_config_init function which is used by VSC8530, VSC8531, VSC8540 and VSC8541 PHYs mistakenly calls phy_read and phy_write in-between phy_select_page and phy_restore_page. phy_select_page and phy_restore_page actually take and release the MDIO bus lock and phy_write and phy_read take and release the lock to write or read to a PHY register. Let's fix this deadlock by using phy_modify_paged which handles correctly a read followed by a write in a non-standard page. Fixes: 6a0bfbbe ("net: phy: mscc: migrate to phy_select/restore_page functions") Signed-off-by:
Quentin Schulz <quentin.schulz@bootlin.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Fabio Estevam authored
The correct form is "can be probed", so fix the typo. Signed-off-by:
Fabio Estevam <festevam@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lorenzo Bianconi authored
Reset snd_queue tso_hdrs pointer to NULL in nicvf_free_snd_queue routine since it is used to check if tso dma descriptor queue has been previously allocated. The issue can be triggered with the following reproducer: $ip link set dev enP2p1s0v0 xdpdrv obj xdp_dummy.o $ip link set dev enP2p1s0v0 xdpdrv off [ 341.467649] WARNING: CPU: 74 PID: 2158 at mm/vmalloc.c:1511 __vunmap+0x98/0xe0 [ 341.515010] Hardware name: GIGABYTE H270-T70/MT70-HD0, BIOS T49 02/02/2018 [ 341.521874] pstate: 60400005 (nZCv daif +PAN -UAO) [ 341.526654] pc : __vunmap+0x98/0xe0 [ 341.530132] lr : __vunmap+0x98/0xe0 [ 341.533609] sp : ffff00001c5db860 [ 341.536913] x29: ffff00001c5db860 x28: 0000000000020000 [ 341.542214] x27: ffff810feb5090b0 x26: ffff000017e57000 [ 341.547515] x25: 0000000000000000 x24: 00000000fbd00000 [ 341.552816] x23: 0000000000000000 x22: ffff810feb5090b0 [ 341.558117] x21: 0000000000000000 x20: 0000000000000000 [ 341.563418] x19: ffff000017e57000 x18: 0000000000000000 [ 341.568719] x17: 0000000000000000 x16: 0000000000000000 [ 341.574020] x15: 0000000000000010 x14: ffffffffffffffff [ 341.579321] x13: ffff00008985eb27 x12: ffff00000985eb2f [ 341.584622] x11: ffff0000096b3000 x10: ffff00001c5db510 [ 341.589923] x9 : 00000000ffffffd0 x8 : ffff0000086868e8 [ 341.595224] x7 : 3430303030303030 x6 : 00000000000006ef [ 341.600525] x5 : 00000000003fffff x4 : 0000000000000000 [ 341.605825] x3 : 0000000000000000 x2 : ffffffffffffffff [ 341.611126] x1 : ffff0000096b3728 x0 : 0000000000000038 [ 341.616428] Call trace: [ 341.618866] __vunmap+0x98/0xe0 [ 341.621997] vunmap+0x3c/0x50 [ 341.624961] arch_dma_free+0x68/0xa0 [ 341.628534] dma_direct_free+0x50/0x80 [ 341.632285] nicvf_free_resources+0x160/0x2d8 [nicvf] [ 341.637327] nicvf_config_data_transfer+0x174/0x5e8 [nicvf] [ 341.642890] nicvf_stop+0x298/0x340 [nicvf] [ 341.647066] __dev_close_many+0x9c/0x108 [ 341.650977] dev_close_many+0xa4/0x158 [ 341.654720] rollback_registered_many+0x140/0x530 [ 341.659414] rollback_registered+0x54/0x80 [ 341.663499] unregister_netdevice_queue+0x9c/0xe8 [ 341.668192] unregister_netdev+0x28/0x38 [ 341.672106] nicvf_remove+0xa4/0xa8 [nicvf] [ 341.676280] nicvf_shutdown+0x20/0x30 [nicvf] [ 341.680630] pci_device_shutdown+0x44/0x88 [ 341.684720] device_shutdown+0x144/0x250 [ 341.688640] kernel_restart_prepare+0x44/0x50 [ 341.692986] kernel_restart+0x20/0x68 [ 341.696638] __se_sys_reboot+0x210/0x238 [ 341.700550] __arm64_sys_reboot+0x24/0x30 [ 341.704555] el0_svc_handler+0x94/0x110 [ 341.708382] el0_svc+0x8/0xc [ 341.711252] ---[ end trace 3f4019c8439959c9 ]--- [ 341.715874] page:ffff7e0003ef4000 count:0 mapcount:0 mapping:0000000000000000 index:0x4 [ 341.723872] flags: 0x1fffe000000000() [ 341.727527] raw: 001fffe000000000 ffff7e0003f1a008 ffff7e0003ef4048 0000000000000000 [ 341.735263] raw: 0000000000000004 0000000000000000 00000000ffffffff 0000000000000000 [ 341.742994] page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0) where xdp_dummy.c is a simple bpf program that forwards the incoming frames to the network stack (available here: https://github.com/altoor/xdp_walkthrough_examples/blob/master/sample_1/xdp_dummy.c) Fixes: 05c773f5 ("net: thunderx: Add basic XDP support") Fixes: 4863dea3 ("net: Adding support for Cavium ThunderX network controller") Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yangtao Li authored
of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. This place doesn't do that, so fix it. Signed-off-by:
Yangtao Li <tiny.windzz@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hangbin Liu authored
team_notify_peers() will send ARP and NA to notify peers. team_mcast_rejoin() will send multicast join group message to notify peers. We should do this when enabling/changed to a new port. But it doesn't make sense to do it when a port is disabled. On the other hand, when we set mcast_rejoin_count to 2, and do a failover, team_port_disable() will increase mcast_rejoin.count_pending to 2 and then team_port_enable() will increase mcast_rejoin.count_pending to 4. We will send 4 mcast rejoin messages at latest, which will make user confused. The same with notify_peers.count. Fix it by deleting team_notify_peers() and team_mcast_rejoin() in team_port_disable(). Reported-by:
Liang Li <liali@redhat.com> Fixes: fc423ff0 ("team: add peer notification") Fixes: 492b200e ("team: add support for sending multicast rejoins") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jason Wang authored
We don't support partial csumed packet since its metadata will be lost or incorrect during XDP processing. So fail the XDP set if guest_csum feature is negotiated. Fixes: f600b690 ("virtio_net: Add XDP support") Reported-by:
Jesper Dangaard Brouer <brouer@redhat.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Pavel Popa <pashinho1990@gmail.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jason Wang authored
We don't disable VIRTIO_NET_F_GUEST_CSUM if XDP was set. This means we can receive partial csumed packets with metadata kept in the vnet_hdr. This may have several side effects: - It could be overridden by header adjustment, thus is might be not correct after XDP processing. - There's no way to pass such metadata information through XDP_REDIRECT to another driver. - XDP does not support checksum offload right now. So simply disable guest csum if possible in this the case of XDP. Fixes: 3f93522f ("virtio-net: switch off offloads on demand if possible on XDP set") Reported-by:
Jesper Dangaard Brouer <brouer@redhat.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Pavel Popa <pashinho1990@gmail.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
https://github.com/ceph/ceph-clientLinus Torvalds authored
Pullk ceph fix from Ilya Dryomov: "A messenger fix, marked for stable" * tag 'ceph-for-4.20-rc4' of https://github.com/ceph/ceph-client: libceph: fall back to sendmsg for slab pages
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fix from Jens Axboe: "Just a single fix for this week, fixing an issue with nvme-fc" * tag 'for-linus-20181123' of git://git.kernel.dk/linux-block: nvme-fc: resolve io failures during connect
-
Davide Caratti authored
commit f2cbd485 ("net/sched: act_police: fix race condition on state variables") introduces a new spinlock, but forgets its initialization. Ensure that tcf_police_init() initializes 'tcfp_lock' every time a 'police' action is newly created, to avoid the following lockdep splat: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. <...> Call Trace: dump_stack+0x85/0xcb register_lock_class+0x581/0x590 __lock_acquire+0xd4/0x1330 ? tcf_police_init+0x2fa/0x650 [act_police] ? lock_acquire+0x9e/0x1a0 lock_acquire+0x9e/0x1a0 ? tcf_police_init+0x2fa/0x650 [act_police] ? tcf_police_init+0x55a/0x650 [act_police] _raw_spin_lock_bh+0x34/0x40 ? tcf_police_init+0x2fa/0x650 [act_police] tcf_police_init+0x2fa/0x650 [act_police] tcf_action_init_1+0x384/0x4c0 tcf_action_init+0xf6/0x160 tcf_action_add+0x73/0x170 tc_ctl_action+0x122/0x160 rtnetlink_rcv_msg+0x2a4/0x490 ? netlink_deliver_tap+0x99/0x400 ? validate_linkmsg+0x370/0x370 netlink_rcv_skb+0x4d/0x130 netlink_unicast+0x196/0x230 netlink_sendmsg+0x2e5/0x3e0 sock_sendmsg+0x36/0x40 ___sys_sendmsg+0x280/0x2f0 ? _raw_spin_unlock+0x24/0x30 ? handle_pte_fault+0xafe/0xf30 ? find_held_lock+0x2d/0x90 ? syscall_trace_enter+0x1df/0x360 ? __sys_sendmsg+0x5e/0xa0 __sys_sendmsg+0x5e/0xa0 do_syscall_64+0x60/0x210 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f1841c7cf10 Code: c3 48 8b 05 82 6f 2c 00 f7 db 64 89 18 48 83 cb ff eb dd 0f 1f 80 00 00 00 00 83 3d 8d d0 2c 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 ae cc 00 00 48 89 04 24 RSP: 002b:00007ffcf9df4d68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f1841c7cf10 RDX: 0000000000000000 RSI: 00007ffcf9df4dc0 RDI: 0000000000000003 RBP: 000000005bf56105 R08: 0000000000000002 R09: 00007ffcf9df8edc R10: 00007ffcf9df47e0 R11: 0000000000000246 R12: 0000000000671be0 R13: 00007ffcf9df4e84 R14: 0000000000000008 R15: 0000000000000000 Fixes: f2cbd485 ("net/sched: act_police: fix race condition on state variables") Reported-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
Eric noted that with UDP GRO and NAPI timeout, we could keep a single UDP packet inside the GRO hash forever, if the related NAPI instance calls napi_gro_complete() at an higher frequency than the NAPI timeout. Willem noted that even TCP packets could be trapped there, till the next retransmission. This patch tries to address the issue, flushing the old packets - those with a NAPI_GRO_CB age before the current jiffy - before scheduling the NAPI timeout. The rationale is that such a timeout should be well below a jiffy and we are not flushing packets eligible for sane GRO. v1 -> v2: - clarified the commit message and comment RFC -> v1: - added 'Fixes tags', cleaned-up the wording. Reported-by:
Eric Dumazet <eric.dumazet@gmail.com> Fixes: 3b47d303 ("net: gro: add a per device gro flush timer") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
Willem de Bruijn <willemb@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hangbin Liu authored
When we add a new IPv6 address, we should also join corresponding solicited-node multicast address, unless the interface has IFF_NOARP flag, as function addrconf_join_solict() did. But if we remove IFF_NOARP flag later, we do not do dad and add the mcast address. So we will drop corresponding neighbour discovery message that came from other nodes. A typical example is after creating a ipvlan with mode l3, setting up an ipv6 address and changing the mode to l2. Then we will not be able to ping this address as the interface doesn't join related solicited-node mcast address. Fix it by re-doing dad when interface changed IFF_NOARP flag. Then we will add corresponding mcast group and check if there is a duplicate address on the network. Reported-by:
Jianlin Shi <jishi@redhat.com> Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull IOMMU fixes from Joerg Roedel: - Two fixes for the Intel VT-d driver to fix a NULL-ptr dereference and an unbalance in an allocate/free path (allocated with memremap, freed with iounmap) - Fix for a crash in the Renesas IOMMU driver - Fix for the Advanced Virtual Interrupt Controler (AVIC) code in the AMD IOMMU driver * tag 'iommu-fixes-v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Use memunmap to free memremap amd/iommu: Fix Guest Virtual APIC Log Tail Address Register iommu/ipmmu-vmsa: Fix crash on early domain free iommu/vt-d: Fix NULL pointer dereference in prq_event_thread()
-