- Apr 11, 2015
-
-
Alistair Popple authored
If ipmi_powernv_recv(...) is called without a current message it prints a warning and returns. However it fails to release the message lock causing the system to dead lock during any subsequent IPMI operations. This error path should never normally be taken unless there are bugs elsewhere in the system. Signed-off-by:
Alistair Popple <alistair@popple.id.au> Signed-off-by:
Corey Minyard <cminyard@mvista.com>
-
Corey Minyard authored
Some BMCs don't let you clear the receive irq bit in the global enables. This is kind of silly, but they give an error if you try to clear it. Compensate for this by detecting the situation and working around it. Signed-off-by:
Corey Minyard <cminyard@mvista.com> Tested-by:
Thomas D <whissi@whissi.de> Reviewed-by:
Thomas D <whissi@whissi.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is our remaining set of three fixes for 4.0: two oops fixes(one for cable pulls triggering oopses and the other be2iscsi specific) and one warn on in sysfs on multipath devices using enclosures" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: Defer processing of REQ_PREEMPT requests for blocked devices be2iscsi: Fix kernel panic when device initialization fails enclosure: fix WARN_ON removing an adapter in multi-path devices
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target fixes from Nicholas Bellinger: "Just a few small fixes: Two from Andy, the first addresses a v4.0 target specific regression to a user visible configfs attribute, and the second adds a set of missing brackets around IPv6 discovery portal information within iscsi-target. And one from Mike that fixes an OOPs regression in traditional iscsi-target when an iovec allocation fails, that has been present since v3.10.y code. (CC'd to stable)" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iscsi target: fix oops when adding reject pdu iscsi-target: TargetAddress in SendTargets should bracket ipv6 addresses target: Allow userspace to write 1 to attrib/emulate_fua_write
-
Mike Christie authored
This fixes a oops due to a double list add when adding a reject PDU for iscsit_allocate_iovecs allocation failures. The cmd has already been added to the conn_cmd_list in iscsit_setup_scsi_cmd, so this has us call iscsit_reject_cmd. Note that for ERL0 the reject PDU is not actually sent, so this patch is not completely tested. Just verified we do not oops. The problem is the add reject functions return -1 which is returned all the way up to iscsi_target_rx_thread which for ERL0 will drop the connection. Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Here are fixes gathered for 4.0-final; one FireFire endian fix, two USB-audio quirks, and three HD-audio quirks. All relatively small and device-specific fixes, should be pretty safe to apply" * tag 'sound-4.0' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb - Creative USB X-Fi Pro SB1095 volume knob support ALSA: hda - Fix headphone pin config for Lifebook T731 ALSA: bebob: fix to processing in big-endian machine for sending cue ALSA: hda/realtek - Make more stable to get pin sense for ALC283 ALSA: usb-audio: don't try to get Benchmark DAC1 sample rate ALSA: hda/realtek - Support Dell headset mode for ALC256
-
git://git.rocketboards.org/linux-socfpga-nextLinus Torvalds authored
Pull arch/nios2 fixes from Ley Foon Tan: "There are 3 arch/nios2 fixes for 4.0 final: - fix cache coherency issue when debugging with gdb - move restart_block to struct task_struct (aligned with other architectures) - fix for missing registers defines for ptrace" * tag 'nios2-fixes-v4.0-final' of git://git.rocketboards.org/linux-socfpga-next: nios2: fix cache coherency issue when debug with gdb nios2: add missing ptrace registers defines nios2: signal: Move restart_block to struct task_struct
-
- Apr 10, 2015
-
-
Ley Foon Tan authored
Remove the end address checking for flushda function. We need to flush each address line for flushda instruction, from start to end address. This is because flushda instruction only flush the cache if tag and line fields are matched. Change to use ldwio instruction (bypass cache) to load the instruction that causing trap. Our interest is the actual instruction that executed by the processor, this should be uncached. Note, EA address might be an userspace cached address. Signed-off-by:
Ley Foon Tan <lftan@altera.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management and ACPI fixes from Rafael Wysocki: "These are stable-candidate fixes of some recently reported issues in the cpufreq core, cpuidle core, the ACPI cpuidle driver and the hibernate core. Specifics: - Revert a 3.17 hibernate commit that was supposed to fix an issue related to e820 reserved regions, but broke resume from hibernation on Lenovo x230 (Rafael J Wysocki). - Prevent the ACPI cpuidle driver from overwriting the name and description of the C0 state set by the core when the list of C-states changes (Thomas Schlichter). - Remove the no longer needed state_count field from struct cpuidle_device which prevents the list of C-states shown by the sysfs interface from becoming incorrect when the current number of them is different from the number of C-states on boot (Bartlomiej Zolnierkiewicz). - The cpufreq core updates the policy object of the only online CPU during system resume to make it reflect the current hardware state, but it always assumes that CPU to be CPU0 which need not be the case, so fix the code to avoid that assumption (Viresh Kumar)" * tag 'pm+acpi-4.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "PM / hibernate: avoid unsafe pages in e820 reserved regions" cpuidle: ACPI: do not overwrite name and description of C0 cpuidle: remove state_count field from struct cpuidle_device cpufreq: Schedule work for the first-online CPU on resume
-
Rafael J. Wysocki authored
* pm-sleep: Revert "PM / hibernate: avoid unsafe pages in e820 reserved regions" * pm-cpufreq: cpufreq: Schedule work for the first-online CPU on resume * pm-cpuidle: cpuidle: ACPI: do not overwrite name and description of C0 cpuidle: remove state_count field from struct cpuidle_device
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fixes from Bjorn Helgaas: "Here are some fixes for v4.0. I apologize for how late they are. We were hoping for some better fixes, but couldn't get them polished in time. These fix: - a Xen domU oops with PCI passthrough devices - a sparc T5 boot failure - a STM SPEAr13xx crash (use after initdata freed) - a cpcihp hotplug driver thinko - an AER thinko that printed stack junk Details: Enumeration - Don't look for ACPI hotplug parameters if ACPI is disabled (Bjorn Helgaas) Resource management - Revert "sparc/PCI: Clip bridge windows to fit in upstream windows" (Bjorn Helgaas) AER - Avoid info leak in __print_tlp_header() (Rasmus Villemoes) PCI device hotplug - Add missing curly braces in cpci_configure_slot() (Dan Carpenter) ST Microelectronics SPEAr13xx host bridge driver - Drop __initdata from spear13xx_pcie_driver (Matwey V. Kornilov) * tag 'pci-v4.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "sparc/PCI: Clip bridge windows to fit in upstream windows" PCI: Don't look for ACPI hotplug parameters if ACPI is disabled PCI: cpcihp: Add missing curly braces in cpci_configure_slot() PCI/AER: Avoid info leak in __print_tlp_header() PCI: spear: Drop __initdata from spear13xx_pcie_driver
-
- Apr 09, 2015
-
-
Dmitry M. Fedin authored
Adds an entry for Creative USB X-Fi to the rc_config array in mixer_quirks.c to allow use of volume knob on the device. Adds support for newer X-Fi Pro card, known as "Model No. SB1095" with USB ID "041e:3237" Signed-off-by:
Dmitry M. Fedin <dmitry.fedin@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Ley Foon Tan authored
These are all register available in nios2. Signed-off-by:
Ley Foon Tan <lftan@altera.com>
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Final drm fixes: one core locking imbalance regression, and a bunch of i915 baytrail s/r fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: fix drm_mode_getconnector() locking imbalance regression drm/i915/vlv: remove wait for previous GFX clk disable request drm/i915/chv: Remove Wait for a previous gfx force-off drm/i915/vlv: save/restore the power context base reg
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
Pull ceph revert from Sage Weil: "This corrects a recent misadventure with __GFP_MEMALLOC and PF_MEMALLOC; it turns out it's not a good fit for RBD and we're better off relying on dirty page throttling" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: Revert "libceph: use memalloc flags for net IO"
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "Three fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: numa: disable change protection for vma(VM_HUGETLB) include/linux/dmapool.h: declare struct device mm: move zone lock to a different cache line than order-0 free page lists
-
Linus Torvalds authored
Unlike most (all?) other copies from user space, kernel module loading is almost unlimited in size. So we do a potentially huge "copy_from_user()" when we copy the module data from user space to the kernel buffer, which can be a latency concern when preemption is disabled (or voluntary). Also, because 'copy_from_user()' clears the tail of the kernel buffer on failures, even a *failed* copy can end up wasting a lot of time. Normally neither of these are concerns in real life, but they do trigger when doing stress-testing with trinity. Running in a VM seems to add its own overheadm causing trinity module load testing to even trigger the watchdog. The simple fix is to just chunk up the module loading, so that it never tries to copy insanely big areas in one go. That bounds the latency, and also the amount of (unnecessarily, in this case) cleared memory for the failure case. Reported-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
The rule for 'copy_from_user()' is that it zeroes the remaining kernel buffer even when the copy fails halfway, just to make sure that we don't leave uninitialized kernel memory around. Because even if we check for errors, some kernel buffers stay around after thge copy (think page cache). However, the x86-64 logic for user copies uses a copy_user_generic() function for all the cases, that set the "zerorest" flag for any fault on the source buffer. Which meant that it didn't just try to clear the kernel buffer after a failure in copy_from_user(), it also tried to clear the destination user buffer for the "copy_in_user()" case. Not only is that pointless, it also means that the clearing code has to worry about the tail clearing taking page faults for the user buffer case. Which is just stupid, since that case shouldn't happen in the first place. Get rid of the whole "zerorest" thing entirely, and instead just check if the destination is in kernel space or not. And then just use memset() to clear the tail of the kernel buffer if necessary. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
three commits, all cc: stable, to address Baytrail suspend/resume issues. * tag 'drm-intel-fixes-2015-04-08' of git://anongit.freedesktop.org/drm-intel: drm/i915/vlv: remove wait for previous GFX clk disable request drm/i915/chv: Remove Wait for a previous gfx force-off drm/i915/vlv: save/restore the power context base reg
-
Takashi Iwai authored
Some BIOS version of Fujitsu Lifebook T731 seems to set up the headphone pin (0x21) without the assoc number 0x0f while it's set only to the output on the docking port (0x1a). With the recent commit [03ad6a8c: ALSA: hda - Fix "PCM" name being used on one DAC when there are two DACs], this resulted in the weird mixer element mapping where the headphone on the laptop is assigned as a shared volume with the speaker and the docking port is assigned as an individual headphone. This patch improves the situation by correcting the headphone pin config to the more appropriate value. Reported-and-tested-by:
Taylor Smock <smocktaylor@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Bart Van Assche authored
SCSI transport drivers and SCSI LLDs block a SCSI device if the transport layer is not operational. This means that in this state no requests should be processed, even if the REQ_PREEMPT flag has been set. This patch avoids that a rescan shortly after a cable pull sporadically triggers the following kernel oops: BUG: unable to handle kernel paging request at ffffc9001a6bc084 IP: [<ffffffffa04e08f2>] mlx4_ib_post_send+0xd2/0xb30 [mlx4_ib] Process rescan-scsi-bus (pid: 9241, threadinfo ffff88053484a000, task ffff880534aae100) Call Trace: [<ffffffffa0718135>] srp_post_send+0x65/0x70 [ib_srp] [<ffffffffa071b9df>] srp_queuecommand+0x1cf/0x3e0 [ib_srp] [<ffffffffa0001ff1>] scsi_dispatch_cmd+0x101/0x280 [scsi_mod] [<ffffffffa0009ad1>] scsi_request_fn+0x411/0x4d0 [scsi_mod] [<ffffffff81223b37>] __blk_run_queue+0x27/0x30 [<ffffffff8122a8d2>] blk_execute_rq_nowait+0x82/0x110 [<ffffffff8122a9c2>] blk_execute_rq+0x62/0xf0 [<ffffffffa000b0e8>] scsi_execute+0xe8/0x190 [scsi_mod] [<ffffffffa000b2f3>] scsi_execute_req+0xa3/0x130 [scsi_mod] [<ffffffffa000c1aa>] scsi_probe_lun+0x17a/0x450 [scsi_mod] [<ffffffffa000ce86>] scsi_probe_and_add_lun+0x156/0x480 [scsi_mod] [<ffffffffa000dc2f>] __scsi_scan_target+0xdf/0x1f0 [scsi_mod] [<ffffffffa000dfa3>] scsi_scan_host_selected+0x183/0x1c0 [scsi_mod] [<ffffffffa000edfb>] scsi_scan+0xdb/0xe0 [scsi_mod] [<ffffffffa000ee13>] store_scan+0x13/0x20 [scsi_mod] [<ffffffff811c8d9b>] sysfs_write_file+0xcb/0x160 [<ffffffff811589de>] vfs_write+0xce/0x140 [<ffffffff81158b53>] sys_write+0x53/0xa0 [<ffffffff81464592>] system_call_fastpath+0x16/0x1b [<00007f611c9d9300>] 0x7f611c9d92ff Reported-by:
Max Gurtuvoy <maxg@mellanox.com> Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Cc: <stable@vger.kernel.org> Signed-off-by:
James Bottomley <JBottomley@Odin.com>
-
John Soni Jose authored
Kernel panic was happening as iscsi_host_remove() was called on a host which was not yet added. Signed-off-by:
John Soni Jose <sony.john-n@emulex.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Cc: <stable@vger.kernel.org> Signed-off-by:
James Bottomley <JBottomley@Odin.com>
-
Takashi Sakamoto authored
Some M-Audio devices require to receive bootup command just after powering on, while codes in BeBoB driver doesn't work properly in big-endian machine because the command should be aligned by little-endian. This commit fixes this bug. This fix should go to stable kernel. Cc: Takayuki Shiroma <t.shiroma.oki@gmail.com> Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
- Apr 08, 2015
-
-
Bjorn Helgaas authored
This reverts commit d63e2e1f. David Ahern reported that d63e2e1f breaks booting on an 8-socket T5 sparc system. He also verified that the system boots with d63e2e1f reverted. Yinghai has some fixes, but they need a little more polishing than we can do before v4.0. Link: http://lkml.kernel.org/r/5514391F.2030300@oracle.com # report Link: http://lkml.kernel.org/r/1427857069-6789-1-git-send-email-yinghai@kernel.org # patches Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.19+
-
Bjorn Helgaas authored
Booting a v3.18 or newer Xen domU kernel with PCI devices passed through results in an oops (this is a 32-bit 3.13.11 dom0 with a 64-bit 4.4.0 hypervisor and 32-bit domU): BUG: unable to handle kernel paging request at 0030303e IP: [<c06ed0e6>] acpi_ns_validate_handle+0x12/0x1a Call Trace: [<c06eda4d>] ? acpi_evaluate_object+0x31/0x1fc [<c06b78e1>] ? pci_get_hp_params+0x111/0x4e0 [<c0407bc7>] ? xen_force_evtchn_callback+0x17/0x30 [<c04085fb>] ? xen_restore_fl_direct_reloc+0x4/0x4 [<c0699d34>] ? pci_device_add+0x24/0x450 Don't look for ACPI configuration information if ACPI has been disabled. I don't think this is the best fix, because we can boot plain Linux (no Xen) with "acpi=off", and we don't need this check in pci_get_hp_params(). There should be a better fix that would make Xen domU work the same way. The domU kernel has ACPI support but it has no AML. There should be a way to initialize the ACPI data structures so things fail gracefully rather than oopsing. This is an interim fix to address the regression. Fixes: 6cd33649 ("PCI: Add pci_configure_device() during enumeration") Link: https://bugzilla.kernel.org/show_bug.cgi?id=96301 Reported-by:
Michael D Labriola <mlabriol@gdeb.com> Tested-by:
Michael D Labriola <mlabriol@gdeb.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.18+
-
Kailang Yang authored
Pin sense will active when power pin is wake up. Power pin will not wake up immediately during resume state. Add some delay to wait for power pin activated. Signed-off-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Ley Foon Tan authored
See https://lkml.org/lkml/2014/10/29/643 and commit f56141e3 ("all arches, signal: move restart_block to struct task_struct") Signed-off-by:
Ley Foon Tan <lftan@altera.com>
-
Tommi Rantala authored
Regression in commit 2caa80e7 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun Feb 22 11:38:36 2015 +0100 drm: Fix deadlock due to getconnector locking changes If the drm_connector_find() call returns NULL, we should no longer call drm_modeset_unlock() to avoid locking imbalance. Signed-off-by:
Tommi Rantala <tt.rantala@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Andy Grover authored
"The domainname can be specified as either a DNS host name, a dotted-decimal IPv4 address, or a bracketed IPv6 address as specified in [RFC2732]." See https://bugzilla.redhat.com/show_bug.cgi?id=1206868 Reported-by:
Kyle Brantley <kyle@averageurl.com> Signed-off-by:
Andy Grover <agrover@redhat.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media updates from Mauro Carvalho Chehab: "A series of fixup patches for version 4.0: - one VB2 core fixup, when stopping the stream; - one VB2 core fixup for dma-contig memory type; - driver fixes at rtl28xx, s5p (tv, jpeg, mfc, soc-camera, sh_veu, cx23885, gspca" * tag 'media/v3.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] rtl28xxu: return success for unimplemented FE callback [media] rtl2832: disable regmap register cache [media] vb2: Fix dma_dir setting for dma-contig mem type [media] media: s5p-mfc: fix broken pointer cast on 64bit arch [media] media: s5p-mfc: fix mmap support for 64bit arch [media] cx23885: fix querycap [media] sh_veu: v4l2_dev wasn't set [media] s5p-mfc: Fix NULL pointer dereference caused by not set q->lock [media] s5p-jpeg: exynos3250: fix erroneous reset procedure [media] s5p-tv: hdmi needs I2C support [media] s5p-jpeg: Initialize cb and cr to zero [media] media: fix gspca drivers build dependencies [media] soc-camera: Fix devm_kfree() in soc_of_bind() [media] media: atmel-isi: increase the burst length to improve the performance [media] vb2: fix 'UNBALANCED' warnings when calling vb2_thread_stop()
-
Naoya Horiguchi authored
Currently when a process accesses a hugetlb range protected with PROTNONE, unexpected COWs are triggered, which finally puts the hugetlb subsystem into a broken/uncontrollable state, where for example h->resv_huge_pages is subtracted too much and wraps around to a very large number, and the free hugepage pool is no longer maintainable. This patch simply stops changing protection for vma(VM_HUGETLB) to fix the problem. And this also allows us to avoid useless overhead of minor faults. Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Suggested-by:
Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Mark Brown authored
dmapool uses struct device in function arguments but relies on an implicit inclusion to declare struct device causing warnings in some configurations: include/linux/dmapool.h:31:7: warning: 'struct device' declared inside parameter list Fix this by adding a struct device declaration to the file. Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Mel Gorman authored
Huang Ying reported the following problem due to commit 3484b2de ("mm: rearrange zone fields into read-only, page alloc, statistics and page reclaim lines") from the Intel performance tests 24b7e581 3484b2de ---------------- -------------------------- %stddev %change %stddev \ | \ 152288 \261 0% -46.2% 81911 \261 0% aim7.jobs-per-min 237 \261 0% +85.6% 440 \261 0% aim7.time.elapsed_time 237 \261 0% +85.6% 440 \261 0% aim7.time.elapsed_time.max 25026 \261 0% +70.7% 42712 \261 0% aim7.time.system_time 2186645 \261 5% +32.0% 2885949 \261 4% aim7.time.voluntary_context_switches 4576561 \261 1% +24.9% 5715773 \261 0% aim7.time.involuntary_context_switches The problem is specific to very large machines under stress. It was not reproducible with the machines I had used to justify the original patch because large numbers of CPUs are required. When pressure is high enough, the cache line is bouncing between CPUs trying to acquire the lock and the holder of the lock adjusting free lists. The intention was that the acquirer of the lock would automatically have the cache line holding the free lists but according to Huang, this is not a universal win. One possibility is to move the zone lock to its own cache line but it increases the size of the zone. This patch moves the lock to the other end of the free lists where they do not contend under high pressure. It does mean the page allocator paths now require more cache lines but Huang reports that it restores performance to previous levels on large machines %stddev %change %stddev \ | \ 84568 \261 1% +94.3% 164280 \261 1% aim7.jobs-per-min 2881944 \261 2% -35.1% 1870386 \261 8% aim7.time.voluntary_context_switches 681 \261 1% -3.4% 658 \261 0% aim7.time.user_time 5538139 \261 0% -12.1% 4867884 \261 0% aim7.time.involuntary_context_switches 44174 \261 1% -46.0% 23848 \261 1% aim7.time.system_time 426 \261 1% -48.4% 219 \261 1% aim7.time.elapsed_time 426 \261 1% -48.4% 219 \261 1% aim7.time.elapsed_time.max 468 \261 1% -43.1% 266 \261 2% uptime.boot Signed-off-by:
Mel Gorman <mgorman@suse.de> Reported-by:
Huang Ying <ying.huang@intel.com> Tested-by:
Huang Ying <ying.huang@intel.com> Acked-by:
David Rientjes <rientjes@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Ilya Dryomov authored
This reverts commit 89baaa57. Dirty page throttling should be sufficient for us in the general case so there is no need to use __GFP_MEMALLOC - it would be needed only in the swap-over-rbd case, which we currently don't support. (It would probably take approximately the commit that is being reverted to add that support, but we would also need the "swap" option to distinguish from the general case and make sure swap ceph_client-s aren't shared with anything else.) See ceph-devel threads [1] and [2] for the details of why enabling pfmemalloc reserves for all cases is a bad thing. On top of potential system lockups related to drained emergency reserves, this turned out to cause ceph lockups in case peers are on the same host and communicating via loopback due to sk_filter() dropping pfmemalloc skbs on the receiving side because the receiving loopback socket is not tagged with SOCK_MEMALLOC. [1] "SOCK_MEMALLOC vs loopback" http://www.spinics.net/lists/ceph-devel/msg22998.html [2] "[PATCH] libceph: don't set memalloc flags in loopback case" http://www.spinics.net/lists/ceph-devel/msg23392.html Conflicts: net/ceph/messenger.c [ context: tcp_nodelay option ] Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Mel Gorman <mgorman@suse.de> Cc: Sage Weil <sage@redhat.com> Cc: stable@vger.kernel.org # 3.18+, needs backporting Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Acked-by:
Mike Christie <michaelc@cs.wisc.edu> Acked-by:
Mel Gorman <mgorman@suse.de>
-
- Apr 07, 2015
-
-
Jesse Barnes authored
Looks like it was introduced in: commit 650ad970 Author: Imre Deak <imre.deak@intel.com> Date: Fri Apr 18 16:35:02 2014 +0300 drm/i915: vlv: factor out vlv_force_gfx_clock and check for pending force-of but I'm not sure why. It has caused problems for us in the past (see 85250ddf "drm/i915/chv: Remove Wait for a previous gfx force-off" and 8d4eee9c "drm/i915: vlv: increase timeout when forcing on the GFX clock") and doesn't seem to be required, so let's just drop it. References: https://bugs.freedesktop.org/show_bug.cgi?id=89611 Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by:
Darren Hart <dvhart@linux.intel.com> Reviewed-by:
Deepak S <deepak.s@linux.intel.com> Cc: stable@vger.kernel.org # c9c52e24: drm/i915/chv: Remove Wait ... Cc: stable@vger.kernel.org Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Deepak S authored
On CHV, PUNIT team confirmed that 'VLV_GFX_CLK_STATUS_BIT' is not a sticky bit and it will always be set. So ignore Check for previous Gfx force off during suspend and allow the force clk as part S0ix Sequence Signed-off-by:
Deepak S <deepak.s@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Jesse Barnes authored
Some BIOSes (e.g. the one on the Minnowboard) don't save/restore this reg. If it's unlocked, we can just restore the previous value, and if it's locked (in case the BIOS re-programmed it for us) the write will be ignored and we'll still have "did it move" sanity check in the PM code to warn us if something is still amiss. References: https://bugs.freedesktop.org/show_bug.cgi?id=89611 Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by:
Darren Hart <dvhart@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Deepak S <deepak.s@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Rafael J. Wysocki authored
Commit 84c91b7a (PM / hibernate: avoid unsafe pages in e820 reserved regions) is reported to make resume from hibernation on Lenovo x230 unreliable, so revert it. We will revisit the issue the commit in question was supposed to fix in the future. Link: https://bugzilla.kernel.org/show_bug.cgi?id=96111 Reported-by:
rhn <kebuac.rhn@porcupinefactory.org> Cc: 3.17+ <stable@vger.kernel.org> # 3.17+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) In TCP, don't register an FRTO for cumulatively ACK'd data that was previously SACK'd, from Neal Cardwell. 2) Need to hold RNL mutex in ipv4 multicast code namespace cleanup, from Cong WANG. 3) Similarly we have to hold RNL mutex for fib_rules_unregister(), also from Cong WANG. 4) Revert and rework netns nsid allocation fix, from Nicolas Dichtel. 5) When we encapsulate for a tunnel device, skb->sk still points to the user socket. So this leads to cases where we retraverse the ipv4/ipv6 output path with skb->sk being of some other address family (f.e. AF_PACKET). This can cause things to crash since the ipv4 output path is dereferencing an AF_PACKET socket as if it were an ipv4 one. The short term fix for 'net' and -stable is to elide these socket checks once we've entered an encapsulation sequence by testing xmit_recursion. Longer term we have a better solution wherein we pass the tunnel's socket down through the output paths, but that is way too invasive for 'net' and -stable. From Hannes Frederic Sowa. 6) l2tp_init() failure path forgets to unregister per-net ops, from Cong WANG. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net/mlx4_core: Fix error message deprecation for ConnectX-2 cards net: dsa: fix filling routing table from OF description l2tp: unregister l2tp_net_ops on failure path mvneta: dont call mvneta_adjust_link() manually ipv6: protect skb->sk accesses from recursive dereference inside the stack netns: don't allocate an id for dead netns Revert "netns: don't clear nsid too early on removal" ip6mr: call del_timer_sync() in ip6mr_free_table() net: move fib_rules_unregister() under rtnl lock ipv4: take rtnl_lock and mark mrt table as freed on namespace cleanup tcp: fix FRTO undo on cumulative ACK of SACKed range xen-netfront: transmit fully GSO-sized packets
-