This patch supports the ethtool's get_channels() for VF.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

BPF alignment tests got a conflict because the registers
are output as Rn_w instead of just Rn in net-next, and
in net a fixup for a testcase prohibits logical operations
on pointers before using them.

Also, we should attempt to patch BPF call args if JIT always on is
enabled.  Instead, if we fail to JIT the subprogs we should pass
an error back up and fail immediately.

Signed-off-by: David S. Miller <davem@davemloft.net>

Pull ceph fixes from Ilya Dryomov:
 "Two rbd fixes for 4.12 and 4.2 issues respectively, marked for
  stable"

* tag 'ceph-for-4.15-rc8' of git://github.com/ceph/ceph-client:
  rbd: set max_segments to USHRT_MAX
  rbd: reacquire lock should update lock owner client id

Pull GPIO fix from Linus Walleij:
 "Fix a raw vs elaborate GPIO descriptor bug introduced by yours truly"

* tag 'gpio-v4.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: Add missing open drain/source handling to gpiod_set_value_cansleep()

Daniel Borkmann says:

====================
pull-request: bpf-next 2018-01-11

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Various BPF related improvements and fixes to nfp driver: i) do
   not register XDP RXQ structure to control queues, ii) round up
   program stack size to word size for nfp, iii) restrict MTU changes
   when BPF offload is active, iv) add more fully featured relocation
   support to JIT, v) add support for signed compare instructions to
   the nfp JIT, vi) export and reuse verfier log routine for nfp, and
   many more, from Jakub, Quentin and Nic.

2) Fix a syzkaller reported GPF in BPF's copy_verifier_state() when
   we hit kmalloc failure path, from Alexei.

3) Add two follow-up fixes for the recent XDP RXQ series: i) kvzalloc()
   allocated memory was only kfree()'ed, and ii) fix a memory leak where
   RX queue was not freed in netif_free_rx_queues(), from Jakub.

4) Add a sample for transferring XDP meta data into the skb, here it
   is used for setting skb->mark with the buffer from XDP, from Jesper.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next



Johan Hedberg says:

====================
pull request: bluetooth-next 2018-01-11

Here's likely the last bluetooth-next pull request for the 4.16 kernel.

 - Added support for Bluetooth on 2015+ MacBook (Pro)
 - Fix to QCA Rome suspend/resume handling
 - Two new QCA_ROME USB IDs in btusb
 - A few other minor fixes

Please let me know if there are any issues pulling. Thanks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

platform_get_resource() may fail and return NULL, so we should
better check it's return value to avoid a NULL pointer dereference
a bit later in the code.

This is detected by Coccinelle semantic patch.

@@
expression pdev, res, n, t, e, e1, e2;
@@

res = platform_get_resource(pdev, t, n);
+ if (!res)
+   return -EINVAL;
... when != res == NULL
e = devm_ioremap(e1, res->start, e2);

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix to return error code -ENODEV from the of_phy_connect() error
handling case instead of 0, as done elsewhere in this function.

Fixes: 533dd11a ("net: socionext: Add Synquacer NetSec driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

I ran into a randconfig build failure:

drivers/net/ethernet/socionext/netsec.c: In function 'netsec_probe':
drivers/net/ethernet/socionext/netsec.c:1583:17: error: implicit declaration of function 'devm_ioremap'; did you mean 'ioremap'? [-Werror=implicit-function-declaration]

Including linux/io.h directly fixes this.

Fixes: 533dd11a ("net: socionext: Add Synquacer NetSec driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2018-01-10

This series contains updates to i40e and i40evf only.

Alice adds the displaying of priority xon/xoff packet stats, since we
were already keeping track of them.  Based on the recent changes, bump
the driver versions.

Jake changes how the driver determines whether or not the device is
currently up to resolve the possible issue of freeing data structures
and other memory before they have been fully allocated.  Refactored
the driver to simplify the locking behavior and to consistently use
spinlocks instead of an overloaded bit lock to protect MAC and filter
lists.  Created a helper function which can convert the AdminQ link
speed definition into a virtchnl definition.

Colin Ian King cleans up a redundant variable initialization.

Alex cleans up the driver to stop clearing the pending bit array for
each vector manually, since it is prone to dropping an interrupt and
based on the hardware specs, the pending bit array will be cleared
automatically in MSI-X mode.  Cleaned up flags for promiscuous mode to
resolve an issue where enabling & disabling promiscuous mode on a VF
would leave us in a high polling rate for the adminq task.  Cleaned up
code that was prone to race issues.

Jingjing renames pipeline personalization profile (ppp) to dynamic
device personalization (ddp) because it was being confused with the
well known point to point protocol.  Also removed checks for "track_id"
being zero, since it is valid for it to be zero for profiles that do
not have any 'write' commands.

v2: cleaned up commit message for patch 12 based on feedback from Sergei
    Shtylyov and Alex Duyck
v3: dropped patch 15 from the original series while Mariusz Stachura
    works on the changes that Jakub Kicinski has suggested
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Initiating a kdump via the command line can cause a pending interrupt
to be handled by the ibmvnic driver when initializing the sub-CRQ
irqs during driver initialization.

NIP [d000000000ca34f0] ibmvnic_interrupt_rx+0x40/0xd0 [ibmvnic]
LR [c000000008132ef0] __handle_irq_event_percpu+0xa0/0x2f0
Call Trace:
[c000000047fcfde0] [c000000008132ef0] __handle_irq_event_percpu+0xa0/0x2f0
[c000000047fcfea0] [c00000000813317c] handle_irq_event_percpu+0x3c/0x90
[c000000047fcfee0] [c00000000813323c] handle_irq_event+0x6c/0xd0
[c000000047fcff10] [c0000000081385e0] handle_fasteoi_irq+0xf0/0x250
[c000000047fcff40] [c0000000081320a0] generic_handle_irq+0x50/0x80
[c000000047fcff60] [c000000008014984] __do_irq+0x84/0x1d0
[c000000047fcff90] [c000000008027564] call_do_irq+0x14/0x24
[c00000003c92af00] [c000000008014b70] do_IRQ+0xa0/0x120
[c00000003c92af50] [c000000008002594] hardware_interrupt_common+0x114/0x180

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

add changes to t4_eth_xmit to enable vxlan segmentation
offload support.

Original work by: Santosh Rastapur <santosh@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement ndo_udp_tunnel_add and ndo_udp_tunnel_del
to support vxlan tunnelling.

Original work by: Santosh Rastapur <santosh@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add data structures and macros to be used in vxlan
offload.

Original work by: Santosh Rastapur <santosh@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull vfs regression fix from Al Viro/

Fix a leak in socket() introduced by commit 8e1611e2 ("make
sock_alloc_file() do sock_release() on failures").

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  Fix a leak in socket(2) when we fail to allocate a file descriptor.

Pull networking fixes from David Miller:

 1) BPF speculation prevention and BPF_JIT_ALWAYS_ON, from Alexei
    Starovoitov.

 2) Revert dev_get_random_name() changes as adjust the error code
    returns seen by userspace definitely breaks stuff.

 3) Fix TX DMA map/unmap on older iwlwifi devices, from Emmanuel
    Grumbach.

 4) From wrong AF family when requesting sock diag modules, from Andrii
    Vladyka.

 5) Don't add new ipv6 routes attached to the null_entry, from Wei Wang.

 6) Some SCTP sockopt length fixes from Marcelo Ricardo Leitner.

 7) Don't leak when removing VLAN ID 0, from Cong Wang.

 8) Hey there's a potential leak in ipv6_make_skb() too, from Eric
    Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits)
  ipv6: sr: fix TLVs not being copied using setsockopt
  ipv6: fix possible mem leaks in ipv6_make_skb()
  mlxsw: spectrum_qdisc: Don't use variable array in mlxsw_sp_tclass_congestion_enable
  mlxsw: pci: Wait after reset before accessing HW
  nfp: always unmask aux interrupts at init
  8021q: fix a memory leak for VLAN 0 device
  of_mdio: avoid MDIO bus removal when a PHY is missing
  caif_usb: use strlcpy() instead of strncpy()
  doc: clarification about setting SO_ZEROCOPY
  net: gianfar_ptp: move set_fipers() to spinlock protecting area
  sctp: make use of pre-calculated len
  sctp: add a ceiling to optlen in some sockopts
  sctp: GFP_ATOMIC is not needed in sctp_setsockopt_events
  bpf: introduce BPF_JIT_ALWAYS_ON config
  bpf: avoid false sharing of map refcount with max_entries
  ipv6: remove null_entry before adding default route
  SolutionEngine771x: add Ether TSU resource
  SolutionEngine771x: fix Ether platform data
  docs-rst: networking: wire up msg_zerocopy
  net: ipv4: emulate READ_ONCE() on ->hdrincl bit-field in raw_sendmsg()
  ...

Creating a bpf sample that shows howto use the XDP 'data_meta'
infrastructure, created by Daniel Borkmann.  Very few drivers support
this feature, but I wanted a functional sample to begin with, when
working on adding driver support.

XDP data_meta is about creating a communication channel between BPF
programs.  This can be XDP tail-progs, but also other SKB based BPF
hooks, like in this case the TC clsact hook. In this sample I show
that XDP can store info named "mark", and TC/clsact chooses to use
this info and store it into the skb->mark.

It is a bit annoying that XDP and TC samples uses different tools/libs
when attaching their BPF hooks.  As the XDP and TC programs need to
cooperate and agree on a struct-layout, it is best/easiest if the two
programs can be contained within the same BPF restricted-C file.

As the bpf-loader, I choose to not use bpf_load.c (or libbpf), but
instead wrote a bash shell scripted named xdp2skb_meta.sh, which
demonstrate howto use the iproute cmdline tools 'tc' and 'ip' for
loading BPF programs.  To make it easy for first time users, the shell
script have command line parsing, and support --verbose and --dry-run
mode, if you just want to see/learn the tc+ip command syntax:

 # ./xdp2skb_meta.sh --dev ixgbe2 --dry-run
 # Dry-run mode: enable VERBOSE and don't call TC+IP
 tc qdisc del dev ixgbe2 clsact
 tc qdisc add dev ixgbe2 clsact
 tc filter add dev ixgbe2 ingress prio 1 handle 1 bpf da obj ./xdp2skb_meta_kern.o sec tc_mark
 # Flush XDP on device: ixgbe2
 ip link set dev ixgbe2 xdp off
 ip link set dev ixgbe2 xdp obj ./xdp2skb_meta_kern.o sec xdp_mark

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Got broken by "make sock_alloc_file() do sock_release() on failures" -
cleanup after sock_map_fd() failure got pulled all the way into
sock_alloc_file(), but it used to serve the case when sock_map_fd()
failed *before* getting to sock_alloc_file() as well, and that got
lost.  Trivial to fix, fortunately.

Fixes: 8e1611e2 (make sock_alloc_file() do sock_release() on failures)
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Edward Cree says:

====================
sfc: support 25G configuration with ethtool

Adds support for advertise bits beyond the 32-bit legacy masks, and plumbs in
 translation of the new 25/50/100G bits to/from MCDI.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Store and handle ethtool link mode masks within the driver instead of
 just a single u32.  However, quite a significant amount of existing code
 wants to manipulate the masks directly, and thus now uses the first
 unsigned long (i.e. mask[0]) as though it were a legacy u32 mask.  This
 is ok because all the bits that code is interested in are in the first
 32 bits of the mask; but it might be a good idea to change them in
 future to use the proper bitmap API.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Only handles direct speed setting, not autoneg, because the driver is
 still trying to pretend it uses the legacy ethtool API which doesn't
 have advertised/supported bits for 25/50/100G.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
mlxsw qdisc refactoring

This patchset refactors the qdisc handling in mlxsw driver in order to make
it more object oriented like.
It helps readability, laying the groundwork for the offloading of
additional qdiscs by the driver
This patchset also makes the qdiscs statistics more generic.

Patch 1 moves the qdiscs declaration to the spectrum_qdisc.c
Patches 2-3 clean the offloaded stats requests. Patch 2 changes the RED
generic stats struct to be sharable by other offloaded qdiscs. Patch 3
changes the xstats request to be like the stats. Note that these patches
are outside the driver scope.
Patches 4-5 clean the statistics related functions and structs within the
driver.
Patches 6-7 decrease the need for the same parameters to be sent to many
functions.
Patches 8-11 create a functions pointers struct, to make the qdiscs
handling more object oriented like.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

If a qdisc is being replaced by another qdisc of the same type, it can
simply override over its configuration.
However, if it replaces a qdisc of another type, it needs to be removed
before setting the new qdisc.

Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Reviewed-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Create a generic qdisc replace function.
For that goal, add three functions to the qdisc ops struct:
* check_params: Checks if the given parameters are offloadable.
* replace: Offload the given parameters.
* clean_stats: clean the qdisc stats for the offloaded qdisc.
integrate RED offloading into using the new internal replace API.

Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Reviewed-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a destroy function to the qdiscs ops struct.
Create a generic qdisc destroy function, that clears the qdisc metadata as
well as calling the specific qdisc destroy function.

Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Reviewed-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Qdisc struct have the Qdisc_class_ops struct.
This patch introduces the similar ops struct for the mlxsw_sp_qdisc_ops
struct. It allows better readability as well as code reusability for the
common parts of some functions like destroy.
The first operations to be added are the statistics getters.

Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Reviewed-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Every qdisc op gets the qdisc handle ID as well as its location.  Each one
of them, beside replace, checks if the handle doesn't match the qdisc in
the given location, and if so, it returns without running the actual op.
Unite these checks to one comparison function and avoid sending the handle
id to these ops.

Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Reviewed-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tclass number is needed for most of the operations related to the qdisc in
the driver. Create a field for it in the mlxsw_sp_qdisc instead of passing
it to every function as parameter.

Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Reviewed-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Improve readability by changing the clean stats function to handle only
RED. Qdiscs that will be offloaded in the future will have a clean stats
function of their own.

Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Reviewed-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Clean RED offloaded stats and make them more generic by breaking the
generic qdisc stats to a struct of their own.

Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Reviewed-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change the value of the xstats requested from the driver for offloaded RED
to be incremental, like the normal stats.
It increases consistency - if a qdisc stops being offloaded its xstats
don't change.

Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Reviewed-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change the name of the stats struct to be generic, so it could be used for
other qdisc offload, that will be added in the next patches.

Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Reviewed-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move all the qdisc related data from the spectrum.h to spectrum_qdisc.c.
Create an init and fini functions for the qdiscs.

Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Reviewed-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Function ipv6_push_rthdr4 allows to add an IPv6 Segment Routing Header
to a socket through setsockopt, but the current implementation doesn't
copy possible TLVs at the end of the SRH received from userspace.

Therefore, the execution of the following branch if (sr_has_hmac(sr_phdr))
{ ... } will never complete since the len and type fields of a possible
HMAC TLV are not copied, hence seg6_get_tlv_hmac will return an error,
and the HMAC will not be computed.

This commit adds a memcpy in case TLVs have been appended to the SRH.

Fixes: a149e7c7 ("ipv6: sr: add support for SRH injection through setsockopt")
Acked-by: David Lebrun <dlebrun@google.com>
Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip6_setup_cork() might return an error, while memory allocations have
been done and must be rolled back.

Fixes: 6422398c ("ipv6: introduce ipv6_make_skb")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Reported-by: Mike Maloney <maloney@google.com>
Acked-by: Mike Maloney <maloney@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
mlxsw: couple of fixes

Couple of small fixes for mlxsw driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Resolve the sparse warning:
"sparse: Variable length array is used."
Use 2 arrays for 2 PRM register accesses.

Fixes: 96f17e07 ("mlxsw: spectrum: Support RED qdisc offload")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>