- Jun 25, 2015
-
-
Dan Williams authored
This on media label format [1] consists of two index blocks followed by an array of labels. None of these structures are ever updated in place. A sequence number tracks the current active index and the next one to write, while labels are written to free slots. +------------+ | | | nsindex0 | | | +------------+ | | | nsindex1 | | | +------------+ | label0 | +------------+ | label1 | +------------+ | | ....nslot... | | +------------+ | labelN | +------------+ After reading valid labels, store the dpa ranges they claim into per-dimm resource trees. [1]: http://pmem.io/documents/NVDIMM_Namespace_Spec.pdf Cc: Neil Brown <neilb@suse.de> Acked-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
On platforms that have firmware support for reading/writing per-dimm label space, a portion of the dimm may be accessible via an interleave set PMEM mapping in addition to the dimm's BLK (block-data-window aperture(s)) interface. A label, stored in a "configuration data region" on the dimm, disambiguates which dimm addresses are accessed through which exclusive interface. Add infrastructure that allows the kernel to block modifications to a label in the set while any member dimm is active. Note that this is meant only for enforcing "no modifications of active labels" via the coarse ioctl command. Adding/deleting namespaces from an active interleave set is always possible via sysfs. Another aspect of tracking interleave sets is tracking their integrity when DIMMs in a set are physically re-ordered. For this purpose we generate an "interleave-set cookie" that can be recorded in a label and validated against the current configuration. It is the bus provider implementation's responsibility to calculate the interleave set cookie and attach it to a given region. Cc: Neil Brown <neilb@suse.de> Cc: <linux-acpi@vger.kernel.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by:
Christoph Hellwig <hch@lst.de> Acked-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
nd_pmem attaches to persistent memory regions and namespaces emitted by the libnvdimm subsystem, and, same as the original pmem driver, presents the system-physical-address range as a block device. The existing e820-type-12 to pmem setup is converted to an nvdimm_bus that emits an nd_namespace_io device. Note that the X in 'pmemX' is now derived from the parent region. This provides some stability to the pmem devices names from boot-to-boot. The minor numbers are also more predictable by passing 0 to alloc_disk(). Cc: Andy Lutomirski <luto@amacapital.net> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jens Axboe <axboe@fb.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Acked-by:
Christoph Hellwig <hch@lst.de> Tested-by:
Toshi Kani <toshi.kani@hp.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
Prepare the pmem driver to consume PMEM namespaces emitted by regions of an nvdimm_bus instance. No functional change. Acked-by:
Christoph Hellwig <hch@lst.de> Tested-by:
Toshi Kani <toshi.kani@hp.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
The libnvdimm region driver is an intermediary driver that translates non-volatile "region"s into "namespace" sub-devices that are surfaced by persistent memory block-device drivers (PMEM and BLK). ACPI 6 introduces the concept that a given nvdimm may simultaneously offer multiple access modes to its media through direct PMEM load/store access, or windowed BLK mode. Existing nvdimms mostly implement a PMEM interface, some offer a BLK-like mode, but never both as ACPI 6 defines. If an nvdimm is single interfaced, then there is no need for dimm metadata labels. For these devices we can take the region boundaries directly to create a child namespace device (nd_namespace_io). Acked-by:
Christoph Hellwig <hch@lst.de> Tested-by:
Toshi Kani <toshi.kani@hp.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
A "region" device represents the maximum capacity of a BLK range (mmio block-data-window(s)), or a PMEM range (DAX-capable persistent memory or volatile memory), without regard for aliasing. Aliasing, in the dimm-local address space (DPA), is resolved by metadata on a dimm to designate which exclusive interface will access the aliased DPA ranges. Support for the per-dimm metadata/label arrvies is in a subsequent patch. The name format of "region" devices is "regionN" where, like dimms, N is a global ida index assigned at discovery time. This id is not reliable across reboots nor in the presence of hotplug. Look to attributes of the region or static id-data of the sub-namespace to generate a persistent name. However, if the platform configuration does not change it is reasonable to expect the same region id to be assigned at the next boot. "region"s have 2 generic attributes "size", and "mapping"s where: - size: the BLK accessible capacity or the span of the system physical address range in the case of PMEM. - mappingN: a tuple describing a dimm's contribution to the region's capacity in the format (<nmemX>,<dpa>,<size>). For a PMEM-region there will be at least one mapping per dimm in the interleave set. For a BLK-region there is only "mapping0" listing the starting DPA of the BLK-region and the available DPA capacity of that space (matches "size" above). The max number of mappings per "region" is hard coded per the constraints of sysfs attribute groups. That said the number of mappings per region should never exceed the maximum number of possible dimms in the system. If the current number turns out to not be enough then the "mappings" attribute clarifies how many there are supposed to be. "32 should be enough for anybody...". Cc: Neil Brown <neilb@suse.de> Cc: <linux-acpi@vger.kernel.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by:
Christoph Hellwig <hch@lst.de> Acked-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by:
Toshi Kani <toshi.kani@hp.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
* Implement the device-model infrastructure for loading modules and attaching drivers to nvdimm devices. This is a simple association of a nd-device-type number with a driver that has a bitmask of supported device types. To facilitate userspace bind/unbind operations 'modalias' and 'devtype', that also appear in the uevent, are added as generic sysfs attributes for all nvdimm devices. The reason for the device-type number is to support sub-types within a given parent devtype, be it a vendor-specific sub-type or otherwise. * The first consumer of this infrastructure is the driver for dimm devices. It simply uses control messages to retrieve and store the configuration-data image (label set) from each dimm. Note: nd_device_register() arranges for asynchronous registration of nvdimm bus devices by default. Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Neil Brown <neilb@suse.de> Acked-by:
Christoph Hellwig <hch@lst.de> Tested-by:
Toshi Kani <toshi.kani@hp.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
Most discovery/configuration of the nvdimm-subsystem is done via sysfs attributes. However, some nvdimm_bus instances, particularly the ACPI.NFIT bus, define a small set of messages that can be passed to the platform. For convenience we derive the initial libnvdimm-ioctl command formats directly from the NFIT DSM Interface Example formats. ND_CMD_SMART: media health and diagnostics ND_CMD_GET_CONFIG_SIZE: size of the label space ND_CMD_GET_CONFIG_DATA: read label space ND_CMD_SET_CONFIG_DATA: write label space ND_CMD_VENDOR: vendor-specific command passthrough ND_CMD_ARS_CAP: report address-range-scrubbing capabilities ND_CMD_ARS_START: initiate scrubbing ND_CMD_ARS_STATUS: report on scrubbing state ND_CMD_SMART_THRESHOLD: configure alarm thresholds for smart events If a platform later defines different commands than this set it is straightforward to extend support to those formats. Most of the commands target a specific dimm. However, the address-range-scrubbing commands target the bus. The 'commands' attribute in sysfs of an nvdimm_bus, or nvdimm, enumerate the supported commands for that object. Cc: <linux-acpi@vger.kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reported-by:
Nicholas Moulin <nicholas.w.moulin@linux.intel.com> Acked-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
Enable nvdimm devices to be registered on a nvdimm_bus. The kernel assigned device id for nvdimm devicesis dynamic. If userspace needs a more static identifier it should consult a provider-specific attribute. In the case where NFIT is the provider, the 'nmemX/nfit/handle' or 'nmemX/nfit/serial' attributes may be used for this purpose. Cc: Neil Brown <neilb@suse.de> Cc: <linux-acpi@vger.kernel.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by:
Christoph Hellwig <hch@lst.de> Acked-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by:
Toshi Kani <toshi.kani@hp.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
The control device for a nvdimm_bus is registered as an "nd" class device. The expectation is that there will usually only be one "nd" bus registered under /sys/class/nd. However, we allow for the possibility of multiple buses and they will listed in discovery order as ndctl0...ndctlN. This character device hosts the ioctl for passing control messages. The initial command set has a 1:1 correlation with the commands listed in the by the "NFIT DSM Example" document [1], but this scheme is extensible to future command sets. Note, nd_ioctl() and the backing ->ndctl() implementation are defined in a subsequent patch. This is simply the initial registrations and sysfs attributes. [1]: http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf Cc: Neil Brown <neilb@suse.de> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: <linux-acpi@vger.kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by:
Christoph Hellwig <hch@lst.de> Acked-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by:
Toshi Kani <toshi.kani@hp.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
A struct nvdimm_bus is the anchor device for registering nvdimm resources and interfaces, for example, a character control device, nvdimm devices, and I/O region devices. The ACPI NFIT (NVDIMM Firmware Interface Table) is one possible platform description for such non-volatile memory resources in a system. The nfit.ko driver attaches to the "ACPI0012" device that indicates the presence of the NFIT and parses the table to register a struct nvdimm_bus instance. Cc: <linux-acpi@vger.kernel.org> Cc: Lv Zheng <lv.zheng@intel.com> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by:
Jeff Moyer <jmoyer@redhat.com> Acked-by:
Christoph Hellwig <hch@lst.de> Acked-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by:
Toshi Kani <toshi.kani@hp.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
- May 28, 2015
-
-
Dan Williams authored
ACPI 6.0 formalizes e820-type-7 and efi-type-14 as persistent memory. Mark it "reserved" and allow it to be claimed by a persistent memory device driver. This definition is in addition to the Linux kernel's existing type-12 definition that was recently added in support of shipping platforms with NVDIMM support that predate ACPI 6.0 (which now classifies type-12 as OEM reserved). Note, /proc/iomem can be consulted for differentiating legacy "Persistent Memory (legacy)" E820_PRAM vs standard "Persistent Memory" E820_PMEM. Cc: Boaz Harrosh <boaz@plexistor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jens Axboe <axboe@fb.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by:
Jeff Moyer <jmoyer@redhat.com> Acked-by:
Andy Lutomirski <luto@amacapital.net> Reviewed-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Acked-by:
Christoph Hellwig <hch@lst.de> Tested-by:
Toshi Kani <toshi.kani@hp.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
- May 26, 2015
-
-
Bob Moore authored
ACPICA commit 60052949ba2aa7377106870da69b237193d10dc1 Error in transcription from the ACPI spec. Link: https://github.com/acpica/acpica/commit/60052949 Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Bob Moore authored
ACPICA commit 83727bed8f715685a63a9f668e73c60496a06054 Add original UUIDs/GUIDs to the acuuid.h file. Cleanup acpihelp output for UUIDs/GUIDs. Link: https://github.com/acpica/acpica/commit/83727bed Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- May 22, 2015
-
-
Bob Moore authored
ACPICA commit ed4de2e8b0a5dd6fc17773a055590bff0e995588 Version 20150515. Link: https://github.com/acpica/acpica/commit/ed4de2e8 Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Bob Moore authored
ACPICA commit e4e17ca361373e9b81494bb4ca697a12cef3cba6 NVDIMM Firmware Interface Table. Link: https://github.com/acpica/acpica/commit/e4e17ca3 Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Bob Moore authored
ACPICA commit d6d003556c6fc22e067d5d511577128a661266c3 -t option displays all ACPI tables. Link: https://github.com/acpica/acpica/commit/d6d00355 Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Bob Moore authored
ACPICA commit 403b8b0023fd7549b2f9bf818fcc1ba481047b69 If non-AML files are used with the -e option, the disassembler can fault. The fix is to ensure that all -e files are either SSDTs or a DSDT. ACPICA BZ 1158. Link: https://github.com/acpica/acpica/commit/403b8b00 Reference: https://bugs.acpica.org/show_bug.cgi?id=1158 Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Lv Zheng authored
ACPICA commit b02b754a2b7afcd0384cb3b31f29eb1be028fe90 This patch adds support for DRTM (Dynamic Root of Trust for Measurement table) in iasl. Lv Zheng. Link: https://github.com/acpica/acpica/commit/b02b754a Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Lv Zheng authored
ACPICA commit 5de82757aef5d6163e37064033aacbce193abbca This patch adds support for IORT (IO Remapping Table) in iasl. Note that some field names are modified to shrink their length or the decompiled IORT ASL will contain fields with ugly ":" alignment. The IORT contains field definitions around "Memory Access Properties". This patch also adds support to encode/decode it using inline table. This patch doesn't add inline table support for the SMMU interrupt fields due to a limitation in current ACPICA data table support. Lv Zheng. Link: https://github.com/acpica/acpica/commit/5de82757 Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Lv Zheng authored
ACPICA commit 5de82757aef5d6163e37064033aacbce193abbca Using a minus number with ACPI_ADD_PTR() will cause compiler warnings, such warnings cannot be eliminated by force casting an unsigned value to a signed value. This patch thus introduces ACPI_SUB_PTR() to be used with minus numbers. Lv Zheng. Link: https://github.com/acpica/acpica/commit/5de82757 Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Bob Moore authored
ACPICA commit 02cbb41232bccf7a91967140cab95d5f48291f21 New subtable type. Some additions to existing subtables. Link: https://github.com/acpica/acpica/commit/02cbb412 Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Lv Zheng authored
ACPICA commit e4f0b73c107680841d7dd01cc04ec108df6580bd There is code in acpi_hw_build_pci_list() destructing returned object (return_list_head) before touching it while the allocated new object (list_head) is not tracked correctly to be destructed on the error case, which is detected as unsecure code by the "Coverity" tool. This patch fixes this issue by always intializing the returned object in acpi_hw_build_pci_list() so that the caller of acpi_hw_build_pci_list() needn't initialize it and always using the returned object to track the new allocated objects. Lv Zheng. Link: https://github.com/acpica/acpica/commit/e4f0b73c Link: https://jira01.devtools.intel.com/browse/LCK-2143 Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Lv Zheng authored
ACPICA commit 29d03840cbab435e8ea82e9339ff9d84535c647d This patch fixes a resource leak issue in acpi_ds_auto_serialize_method(). It is reported by the "Coverity" tool as unsecure code. Lv Zheng. Link: https://github.com/acpica/acpica/commit/29d03840 Link: https://jira01.devtools.intel.com/browse/LCK-2142 Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Bob Moore authored
ACPICA commit d527908bb33a3ed515cfb349cbec57121deafcc8 Second subtable type was removed from the July 2014 LPIT document. Link: https://github.com/acpica/acpica/commit/d527908b Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Bob Moore authored
ACPICA commit 72b0b6741990f619f6aaa915302836b7cbb41ac4 One new 64-bit field at the end of the table. FADT version is now 6. Link: https://github.com/acpica/acpica/commit/72b0b674 Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Bob Moore authored
ACPICA commit a6ccb4033b49f7aa33a17ddc41dd69d57e799fbd Windows Platform Binary Table. Link: https://github.com/acpica/acpica/commit/a6ccb403 Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Bob Moore authored
ACPICA commit 08170904011f1e8f817d9e3a9f2bb2438aeacf60 For the compiler part (not disassembler). - Characters not within a comment must be be ASCII (0-0x7F), and now either printable or a "space" character. Provides better detection of files that cannot be compiled. This patch only affects iASL which is not in the Linux upstream. Link: https://github.com/acpica/acpica/commit/08170904 Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Bob Moore authored
ACPICA commit 7325b59c8b5d1522ded51ae6a76b804f6e8da5d2 Moved from a C module. Link: https://github.com/acpica/acpica/commit/7325b59c Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Bob Moore authored
ACPICA commit 08c4197cf4ddd45f0c961078220b0fc19c10745c Xen Environment table. Link: https://github.com/acpica/acpica/commit/08c4197c Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Bob Moore authored
ACPICA commit 7ba68f2eafa12fe75ee7aa0df7543d5ea2443051 Compiler, Interpreter, acpi_help. _BTH, _CR3, _DSD, _LPI, _MTL, _PRR, _RDI, _RST, _TFP, _TSN. Link: https://github.com/acpica/acpica/commit/7ba68f2e Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Bob Moore authored
ACPICA commit 532bf402a503061afd9d80a23e1d3c8fd99b052c _STA override table. Link: https://github.com/acpica/acpica/commit/532bf402 Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Bob Moore authored
ACPICA commit 3e93431674abe947202b0f9a0afa7b625b17caa6 Makefiles and environment defines. This commit doesn't affect Linux builds. Link: https://github.com/acpica/acpica/commit/3e934316 Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- May 19, 2015
-
-
Lv Zheng authored
There are two same "define"s in the actypes.h for ACPI_USE_NATIVE_DIVIDE, this patch removes one of them as it is useless and is not in the ACPICA upstream. It is likely that the useless block is there because of the issues in the old ACPICA release process. Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- May 13, 2015
-
-
Rafael J. Wysocki authored
Revert commit b1ef2972 (ACPICA: Permanently set _REV to the value '2'.) as it causes a sound regression to happen on Dell XPS 13 (2015). Reported-by:
Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- May 11, 2015
-
-
Linus Torvalds authored
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "I really need to get back to sending these on my Friday, instead of my Monday morning, but nothing too amazing in here: a few amdkfd fixes, a few radeon fixes, i915 fixes, one tegra fix and one core fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: Zero out invalid vblank timestamp in drm_update_vblank_count. drm/tegra: Don't use vblank_disable_immediate on incapable driver. drm/radeon: stop trying to suspend UVD sessions drm/radeon: more strictly validate the UVD codec drm/radeon: make UVD handle checking more strict drm/radeon: make VCE handle check more strict drm/radeon: fix userptr lockup drm/radeon: fix userptr BO unpin bug v3 drm/amdkfd: Initialize sdma vm when creating sdma queue drm/amdkfd: Don't report local memory size drm/amdkfd: allow unregister process with queues drm/i915: Drop PIPE-A quirk for 945GSE HP Mini drm/i915: Sink rate read should be saved in deca-kHz drm/i915/dp: there is no audio on port A drm/i915: Add missing MacBook Pro models with dual channel LVDS drm/i915: Assume dual channel LVDS if pixel clock necessitates it drm/radeon: don't setup audio on asics that don't support it drm/radeon: disable semaphores for UVD V1 (v2)
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
misc i915 fixes. * tag 'drm-intel-fixes-2015-05-08' of git://anongit.freedesktop.org/drm-intel: drm/i915: Drop PIPE-A quirk for 945GSE HP Mini drm/i915: Sink rate read should be saved in deca-kHz drm/i915/dp: there is no audio on port A drm/i915: Add missing MacBook Pro models with dual channel LVDS drm/i915: Assume dual channel LVDS if pixel clock necessitates it
-
Mario Kleiner authored
Since commit 844b03f2 we make sure that after vblank irq off, we return the last valid (vblank count, vblank timestamp) pair to clients, e.g., during modesets, which is good. An overlooked side effect of that commit for kms drivers without support for precise vblank timestamping is that at vblank irq enable, when we update the vblank counter from the hw counter, we can't update the corresponding vblank timestamp, so now we have a totally mismatched timestamp for the new count to confuse clients. Restore old client visible behaviour from before Linux 3.17, but zero out the timestamp at vblank counter update (instead of disable as in original implementation) if we can't generate a meaningful timestamp immediately for the new vblank counter. This will fix this regression, so callers know they need to retry again later if they need a valid timestamp, but at the same time preserves the improvements made in the commit mentioned above. Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Cc: <stable@vger.kernel.org> #v3.17+ Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "A set of ARM fixes: - fix an off-by-one error in the iommu DMA ops, which caused errors with a 4GiB size. - remove comments mentioning the non-existent CONFIG_CPU_ARM1020_CPU_IDLE macro. - remove useless CONFIG_CPU_ICACHE_STREAMING_DISABLE blocks, where this symbol never appeared in any Kconfig. - fix Feroceon code to cope with a previous change correctly (it incorrectly left an additional word in an assembly structure definition) - avoid a misleading IRQ affinity warning in the ARM PMU code for IRQs which are already affine to their CPUs. - fix the node name printed in the IRQ affinity warning" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8352/1: perf: Fix the pmu node name in warning message ARM: 8351/1: perf: don't warn about missing interrupt-affinity property for PPIs ARM: 8350/1: proc-feroceon: Fix feroceon_proc_info macro ARM: 8349/1: arch/arm/mm/proc-arm925.S: remove dead #ifdef block ARM: 8348/1: remove comments on CPU_ARM1020_CPU_IDLE ARM: 8347/1: dma-mapping: fix off-by-one check in arm_setup_iommu_dma_ops
-