- Jun 03, 2016
-
-
Franky Lin authored
A regression was introduced in commit 9c349892 ("brcmfmac: revise handling events in receive path") which moves eth_type_trans() call to brcmf_rx_frame(). Msgbuf layer doesn't use brcmf_rx_frame() but invokes brcmf_netif_rx() directly. In such case the Ethernet header was not stripped out resulting in null pointer dereference in the networking stack. BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 IP: [<ffffffff814c3ce6>] enqueue_to_backlog+0x56/0x260 PGD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: fuse ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 xt_addrtype [...] rtsx_pci scsi_mod usbcore usb_common i8042 serio nvme nvme_core CPU: 7 PID: 1340 Comm: irq/136-brcmf_p Not tainted 4.7.0-rc1-mainline #1 Hardware name: Dell Inc. XPS 15 9550/0N7TVV, BIOS 01.02.00 04/07/2016 task: ffff8804a0c5bd00 ti: ffff88049e124000 task.ti: ffff88049e124000 RIP: 0010:[<ffffffff814c3ce6>] [<ffffffff814c3ce6>] enqueue_to_backlog+0x56/0x260 RSP: 0018:ffff88049e127ca0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff8804bddd7c40 RCX: 000000000000002f RDX: 0000000000000000 RSI: 0000000000000007 RDI: ffff8804bddd7d4c RBP: ffff88049e127ce8 R08: 0000000000000000 R09: 0000000000000000 R10: ffff8804bddd12c0 R11: 000000000000149e R12: 0000000000017c40 R13: ffff88049e127d08 R14: ffff8804a9bd6d00 R15: ffff8804bddd7d4c FS: 0000000000000000(0000) GS:ffff8804bddc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000048 CR3: 0000000001806000 CR4: 00000000003406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Stack: ffff8804bdddad00 ffff8804ad089e00 0000000000000000 0000000000000282 0000000000000000 ffff8804a9bd6d00 ffff8804a1b27e00 ffff8804a9bd6d00 ffff88002ee88000 ffff88049e127d28 ffffffff814c3f3b ffffffff81311fc3 Call Trace: [<ffffffff814c3f3b>] netif_rx_internal+0x4b/0x170 [<ffffffff81311fc3>] ? swiotlb_tbl_unmap_single+0xf3/0x120 [<ffffffff814c5467>] netif_rx_ni+0x27/0xc0 [<ffffffffa08519e9>] brcmf_netif_rx+0x49/0x70 [brcmfmac] [<ffffffffa08564d4>] brcmf_msgbuf_process_rx+0x2b4/0x570 [brcmfmac] [<ffffffff81020017>] ? __xen_set_pgd_hyper+0x57/0xd0 [<ffffffff810d60b0>] ? irq_forced_thread_fn+0x70/0x70 [<ffffffffa0857381>] brcmf_proto_msgbuf_rx_trigger+0x31/0xe0 [brcmfmac] [<ffffffffa0861e8f>] brcmf_pcie_isr_thread+0x7f/0x110 [brcmfmac] [<ffffffff810d60d0>] irq_thread_fn+0x20/0x50 [<ffffffff810d63ad>] irq_thread+0x12d/0x1c0 [<ffffffff815d07d5>] ? __schedule+0x2f5/0x7a0 [<ffffffff810d61d0>] ? wake_threads_waitq+0x30/0x30 [<ffffffff810d6280>] ? irq_thread_dtor+0xb0/0xb0 [<ffffffff81098ea8>] kthread+0xd8/0xf0 [<ffffffff815d4b7f>] ret_from_fork+0x1f/0x40 [<ffffffff81098dd0>] ? kthread_worker_fn+0x170/0x170 Code: 1c f5 60 9a 8e 81 9c 58 0f 1f 44 00 00 48 89 45 d0 fa 66 0f 1f 44 00 00 4c 8d bb 0c 01 00 00 4c 89 ff e8 5e 08 11 00 49 8b 56 20 <48> 8b 52 48 83 e2 01 74 10 8b 8b 08 01 00 00 8b 15 59 c5 42 00 RIP [<ffffffff814c3ce6>] enqueue_to_backlog+0x56/0x260 RSP <ffff88049e127ca0> CR2: 0000000000000048 Fixes: 9c349892 ("brcmfmac: revise handling events in receive path") Reported-by:
Rafal Milecki <zajec5@gmail.com> Reported-by:
Grey Christoforo <grey@christoforo.net> Reviewed-by:
Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by:
Arend Van Spriel <arend@broadcom.com> Reviewed-by:
Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by:
Franky Lin <franky.lin@broadcom.com> [arend@broadcom.com: rephrased the commit message] Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
- May 28, 2016
-
-
Larry Finger authored
Commit 49f86ec2 ("rtlwifi: Change long delays to sleeps") was correct for most cases; however, driver rtl8192ce calls the affected routines while in atomic context. The kernel bug output is as follows: BUG: scheduling while atomic: wpa_supplicant/627/0x00000002 [...] [<ffffffff815c2b39>] __schedule+0x899/0xad0 [<ffffffff815c2dac>] schedule+0x3c/0x90 [<ffffffff815c5bb2>] schedule_hrtimeout_range_clock+0xa2/0x120 [<ffffffff810e8b80>] ? hrtimer_init+0x120/0x120 [<ffffffff815c5ba6>] ? schedule_hrtimeout_range_clock+0x96/0x120 [<ffffffff815c5c43>] schedule_hrtimeout_range+0x13/0x20 [<ffffffff815c568f>] usleep_range+0x4f/0x70 [<ffffffffa0667218>] rtl_rfreg_delay+0x38/0x50 [rtlwifi] [<ffffffffa06dd0e7>] rtl92c_phy_config_rf_with_headerfile+0xc7/0xe0 [rtl8192ce] To fix this bug, three of the changes from delay to sleep are reverted. Unfortunately, one of the changes involves a delay of 50 msec. The calling code will be modified so that this long delay can be avoided; however, this change is being pushed now to fix the problem in kernel 4.6.0. Fixes: 49f86ec2 ("rtlwifi: Change long delays to sleeps") Reported-by:
James Feeney <james@nurealm.net> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: James Feeney <james@nurealm.net> Cc: Stable <stable@vger.kernel.org> [4.6+] Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Jaap Jan Meijer authored
If brcmf_cfg80211_get_station fails to determine the RSSI from the per-chain values get the value individually as a fallback. Fixes: 1f0dc59a ("brcmfmac: rework .get_station() callback") Signed-off-by:
Jaap Jan Meijer <jjmeijer88@gmail.com> Acked-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
- May 27, 2016
-
-
David S. Miller authored
Yuval Mintz says: ==================== qed*: Bug fixes This series contain several small fixes, most of which deal with either 100g support, sriov or bandwidth configurations. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
Currently 100g devices don't support minimum/maximum BW configurations, yet link flaps might cause the driver to attempt to do such a configuration. Prevent this just as we do for the maximum BW. Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sudarsana Reddy Kalluru authored
Adapter can support 100g in both MSIx and INTa, but not in MSI. Signed-off-by:
Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
Some of the HW configurations are currently missing for 100g devices. This can cause various classification issues, as well as prevent device from fully reaching line-rate. Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
When DCBx re-negotiation is occurring, the PF's configurations for maximum and minimum bandwidth guarantees are currently lost. Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sudarsana Reddy Kalluru authored
Commit 39651abd ("qed: add support for dcbx") is re-configuring the QM hw-block as part of its sequence. This is done in attention handling context which is non-sleepable, yet memory is allocated in this flow using GFP_KERNEL. Signed-off-by:
Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
PFs and VFs differ in their registered ethtool operations, but they're using a common function for get_sset_count(). As a result, `ethtool -i' for a VF would indicate it supports selftest, although that's not the case. Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
Since driver is using a FW-based GRO implementation, this has some effects on its ability to cope with GRO enablement/disablement. As a result, driver must perform an inner-reload as a result of a state change in the offload configuration of said feature. [Failure to do so means network stack would continue to receive aggregated packets even though user requested the feature to be disabled]. Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
VF is currently ignoring the minimum provided by the API, mistakenly using the maximum for minimum as well. Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- May 26, 2016
-
-
David S. Miller authored
Eric Dumazet says: ==================== net/mlx4_en: fix stats mlx4 has various bugs in its ndo_get_stats() and related functions. This patch series address the obvious issues. Remaining ones will be discussed later. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
We simply can use the standard net_device stats. We do not need to clear fields that are already 0. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
mlx4 uses a private struct net_device_stats in a vain attempt to avoid races. This is buggy because multiple cpus could call mlx4_en_get_stats() at the same time, so ret_stats can not guarantee stable results. To fix this, we need to switch to ndo_get_stats64() as this method provides per-thread storage. This allows to reduce mlx4_en_priv bloat. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
mlx4_en_clear_stats() clears about everything but few TX ring fields are missing : - queue_stopped, wake_queue, tso_packets, xmit_more Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
1) mlx4_en_xmit() can increment priv->stats.tx_dropped, but this variable is overwritten in mlx4_en_DUMP_ETH_STATS(). 2) This increment was not SMP safe, as a port might have many TX queues. Add a per TX ring tx_dropped to fix these issues. This is u32 as mlx4_en_DUMP_ETH_STATS() will add a 32bit field. So lets avoid bugs with SNMP agents having to cope with partial overwraps. (One of these agents being bond_fold_stats()) Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Willem de Bruijn <willemb@google.com> Cc: Eugenia Emantayev <eugenia@mellanox.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xin Long authored
We have this situation: that EP hash table, contains only the EPs that are listening, while the transports one, has the opposite. We have to traverse both to dump all. But when we traverse the transports one we will also get EPs that are in the EP hash if they are listening. In this case, the EP is dumped twice. We will fix it by checking if the endpoint that is in the endpoint hash table contains any ep->asoc in there, as it means we will also find it via transport hash, and thus we can/should skip it, depending on the filters used, like 'ss -l'. Still, we should NOT skip it if the user is listing only listening endpoints, because then we are not traversing the transport hash. so we have to check idiag_states there also. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Marek Vasut authored
Fix a typo in the driver, replace comma with a semicolon at the end of statement. While using comma is a legal C here and probably does not even generate compiler warning, it was unlikely the intention. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Caesar Wang <wxt@rock-chips.com> Cc: Heiko Stuebner <heiko@sntech.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Marek Vasut authored
The memcpy() currently copies mdio_bus_data into new_bus->irq, which makes no sense, since the mdio_bus_data structure contains more than just irqs. The code was likely supposed to copy mdio_bus_data->irqs into the new_bus->irq instead, so fix this. Fixes: e7f4dc35 ("mdio: Move allocation of interrupts into core") Signed-off-by:
Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Feng Tang authored
This patch follows Eric Dumazet's commit 7b701764 for Atheros atl1c driver to fix one exactly same bug in alx driver, that the network link will be lost in 1-5 minutes after the device is up. My laptop Lenovo Y580 with Atheros AR8161 ethernet device hit the same problem with kernel 4.4, and it will be cured by Jarod Wilson's commit c406700c for alx driver which get merged in 4.5. But there are still some alx devices can't function well even with Jarod's patch, while this patch could make them work fine. More details on https://bugzilla.kernel.org/show_bug.cgi?id=70761 The debug shows the issue is very likely to be related with the RX DMA address, specifically 0x...f80, if RX buffer get 0x...f80 several times, their will be RX overflow error and device will stop working. For kernel 4.5.0 with Jarod's patch which works fine with my AR8161/Lennov Y580, if I made some change to the __netdev_alloc_skb --> __alloc_page_frag() to make the allocated buffer can get an address with 0x...f80, then the same error happens. If I make it to 0x...f40 or 0x....fc0, everything will be still fine. So I tend to believe that the 0x..f80 address cause the silicon to behave abnormally. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70761 Cc: Eric Dumazet <edumazet@google.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Jarod Wilson <jarod@redhat.com> Signed-off-by:
Feng Tang <feng.tang@intel.com> Tested-by:
Ole Lukoie <olelukoie@mail.ru> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ivan Vecera authored
The team_device_event() notifier calls team_compute_features() to fix vlan_features under team->lock to protect team->port_list. The problem is that subsequent __team_compute_features() calls netdev_change_features() to propagate vlan_features to upper vlan devices while team->lock is still taken. This can lead to deadlock when NETIF_F_LRO is modified on lower devices or team device itself. Example: The team0 as active backup with eth0 and eth1 NICs. Both eth0 & eth1 are LRO capable and LRO is enabled. Thus LRO is also enabled on team0. The command 'ethtool -K team0 lro off' now hangs due to this deadlock: dev_ethtool() -> ethtool_set_features() -> __netdev_update_features(team) -> netdev_sync_lower_features() -> netdev_update_features(lower_1) -> __netdev_update_features(lower_1) -> netdev_features_change(lower_1) -> call_netdevice_notifiers(...) -> team_device_event(lower_1) -> team_compute_features(team) [TAKES team->lock] -> netdev_change_features(team) -> __netdev_update_features(team) -> netdev_sync_lower_features() -> netdev_update_features(lower_2) -> __netdev_update_features(lower_2) -> netdev_features_change(lower_2) -> call_netdevice_notifiers(...) -> team_device_event(lower_2) -> team_compute_features(team) [DEADLOCK] The bug is present in team from the beginning but it appeared after the commit fd867d51 (net/core: generic support for disabling netdev features down stack) that adds synchronization of features with lower devices. Fixes: fd867d51 (net/core: generic support for disabling netdev features down stack) Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Florian Fainelli says: ==================== Documentation: dsa: misc fixes Here are some miscelaneous documentation fixes for DSA, I targeted "net" because these are not functional code changes, but still documentation fixes per-se. Changes in v2: - reword what the port_vlan_filtering is about based on feedback from Vivien and Ido ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Described what the port_vlan_filtering function is supposed to accomplish. Fixes: fb2dabad ("net: dsa: support VLAN filtering switchdev attr") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
We no longer have a priv_size structure member since 5feebd0a ("net: dsa: Remove allocation of driver private memory") Reviewed-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
This function has been removed in 4baee937 ("net: dsa: remove DSA link polling") in favor of using the PHYLIB polling mechanism. Reviewed-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Edward Cree authored
Otherwise, if we fail to allocate new PIO buffers, our TXQs will try to use the old ones, which aren't there any more. Fixes: 183233be "sfc: Allocate and link PIO buffers; map them with write-combining" Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Gregory CLEMENT says: ==================== Fix spinlock usage in HWBM these two patches fix spinlock related issues introduced in v4.6. They have been reported by Russell King and Jean-Jacques Hiblot. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Gregory CLEMENT authored
When hwbm_pool_add exited in error the spinlock was not released. This patch fixes this issue. Fixes: 8cb2d8bf ("net: add a hardware buffer management helper API") Reported-by:
Jean-Jacques Hiblot <jjhiblot@traphandler.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Gregory CLEMENT authored
The spinlock used by the hwbm functions must be initialized by the network driver. This commit fixes this lack and the following erros when lockdep is enabled: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. [<c010ff80>] (unwind_backtrace) from [<c010bd08>] (show_stack+0x10/0x14) [<c010bd08>] (show_stack) from [<c032913c>] (dump_stack+0xb4/0xe0) [<c032913c>] (dump_stack) from [<c01670e4>] (__lock_acquire+0x1f58/0x2060) [<c01670e4>] (__lock_acquire) from [<c0167dec>] (lock_acquire+0xa4/0xd0) [<c0167dec>] (lock_acquire) from [<c06f6650>] (_raw_spin_lock_irqsave+0x54/0x68) [<c06f6650>] (_raw_spin_lock_irqsave) from [<c058e830>] (hwbm_pool_add+0x1c/0xdc) [<c058e830>] (hwbm_pool_add) from [<c043f4e8>] (mvneta_bm_pool_use+0x338/0x490) [<c043f4e8>] (mvneta_bm_pool_use) from [<c0443198>] (mvneta_probe+0x654/0x1284) [<c0443198>] (mvneta_probe) from [<c03b894c>] (platform_drv_probe+0x4c/0xb0) [<c03b894c>] (platform_drv_probe) from [<c03b7158>] (driver_probe_device+0x214/0x2c0) [<c03b7158>] (driver_probe_device) from [<c03b72c4>] (__driver_attach+0xc0/0xc4) [<c03b72c4>] (__driver_attach) from [<c03b5440>] (bus_for_each_dev+0x68/0x9c) [<c03b5440>] (bus_for_each_dev) from [<c03b65b8>] (bus_add_driver+0x1a0/0x218) [<c03b65b8>] (bus_add_driver) from [<c03b79cc>] (driver_register+0x78/0xf8) [<c03b79cc>] (driver_register) from [<c01018f4>] (do_one_initcall+0x90/0x1dc) [<c01018f4>] (do_one_initcall) from [<c0900de4>] (kernel_init_freeable+0x15c/0x1fc) [<c0900de4>] (kernel_init_freeable) from [<c06eed90>] (kernel_init+0x8/0x114) [<c06eed90>] (kernel_init) from [<c0107910>] (ret_from_fork+0x14/0x24) Fixes: baa11ebc ("net: mvneta: Use the new hwbm framework") Reported-by:
Russell King <rmk+kernel@armlinux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Baozeng Ding authored
Before calling the nla_parse_nested function, make sure the pointer to the attribute is not null. This patch fixes several potential null pointer dereference vulnerabilities in the tipc netlink functions. Signed-off-by:
Baozeng Ding <sploving1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sudarsana Reddy Kalluru authored
This patch fixes the coding error in determining the enable flag for the application/protocol. The enable flag should be set for all protocols but the eth. Signed-off-by:
Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vidya Sagar Ravipati authored
This patch enhances ethtool link mode bitmap to include 25G/50G/100G speed along with interface modes Signed-off-by:
Vidya Sagar Ravipati <vidya@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- May 25, 2016
-
-
Jamal Hadi Salim authored
Policer was not dumping or updating timestamps Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
I found a serious performance bug in packet schedulers using hrtimers. sch_htb and sch_fq are definitely impacted by this problem. We constantly rearm high resolution timers if some packets are throttled in one (or more) class, and other packets are flying through qdisc on another (non throttled) class. hrtimer_start() does not have the mod_timer() trick of doing nothing if expires value does not change : if (timer_pending(timer) && timer->expires == expires) return 1; This issue is particularly visible when multiple cpus can queue/dequeue packets on the same qdisc, as hrtimer code has to lock a remote base. I used following fix : 1) Change htb to use qdisc_watchdog_schedule_ns() instead of open-coding it. 2) Cache watchdog prior expiration. hrtimer might provide this, but I prefer to not rely on some hrtimer internal. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Gavin Shan authored
One timer, whose handler keeps reading on MMIO register for EEH core to detect error in time, is started when the PCI device driver is loaded. MMIO register can't be accessed during PE reset in EEH recovery. Otherwise, the unexpected recursive error is triggered. The timer isn't closed that time if the interface isn't brought up. So the unexpected recursive error is seen during EEH recovery when the interface is down. This avoids the unexpected recursive EEH error by closing the timer in qlge_io_error_detected() before EEH PE reset unconditionally. The timer is started unconditionally after EEH PE reset in qlge_io_resume(). Also, the timer should be closed unconditionally when the device is removed from the system permanently in qlge_io_error_detected(). Reported-by:
Shriya R. Kulkarni <shriyakul@in.ibm.com> Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Haishuang Yan authored
In gre6 xmit path, we are sending a GRE packet, so set fl6 proto to IPPROTO_GRE properly. Signed-off-by:
Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Haishuang Yan authored
When creat an ip6gretap interface with an unreachable route, the MTU is about 14 bytes larger than what was needed. If the remote address is reachable: ping6 2001:0:130::1 -c 2 PING 2001:0:130::1(2001:0:130::1) 56 data bytes 64 bytes from 2001:0:130::1: icmp_seq=1 ttl=64 time=1.46 ms 64 bytes from 2001:0:130::1: icmp_seq=2 ttl=64 time=81.1 ms Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- May 24, 2016
-
-
Dan Carpenter authored
"priority" needs to be signed for the error handling to work. Fixes: 39651abd ('qed: add support for dcbx.') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Follow-up to commit e27f4a94 ("bpf: Use mount_nodev not mount_ns to mount the bpf filesystem"), which removes the FS_USERNS_MOUNT flag. The original idea was to have a per mountns instance instead of a single global fs instance, but that didn't work out and we had to switch to mount_nodev() model. The intent of that middle ground was that we avoid users who don't play nice to create endless instances of bpf fs which are difficult to control and discover from an admin point of view, but at the same time it would have allowed us to be more flexible with regard to namespaces. Therefore, since we now did the switch to mount_nodev() as a fix where individual instances are created, we also need to remove userns mount flag along with it to avoid running into mentioned situation. I don't expect any breakage at this early point in time with removing the flag and we can revisit this later should the requirement for this come up with future users. This and commit e27f4a94 have been split to facilitate tracking should any of them run into the unlikely case of causing a regression. Fixes: b2197755 ("bpf: add support for persistent maps/progs") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-