- Apr 10, 2013
-
-
Florian Fainelli authored
This patch removes the depends on USB from all config symbols in drivers/usb/host/Kconfig and replace that with an if USB / endif block as suggested by Alan Stern. Some source ... Kconfig lines have been shuffled around to permit a better regroupment of the Kconfig files depending on "config USB" item. No functionnal change is introduced. Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bjørn Mork authored
Adding support for a Mediatek based device labelled as D-Link Model: DWM-156, H/W Ver: A7 Also adding two other device IDs found in the Debian(!) packages included on the embedded device driver CD. This is a composite MBIM + serial ports + card reader device: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 14 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2001 ProdID=7d01 Rev= 3.00 S: Manufacturer=D-Link,Inc S: Product=D-Link DWM-156 C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=500us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: stable <stable@vger.kernel.org> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vivek Gautam authored
7edb3daf : (USB: EHCI: make ehci-s5p a separate driver) raised an issue with ehci-s5p's driver data. Now that 's5p_ehci_hcd' doesn't maintain pointer to 'usb_hcd' and s5p_ehci is nothing but a pointer to hcd->priv; add hcd to the driver data rather than s5p_ehci. This fixes issues with null pointer dereferencing in s5p_ehci_shutdown(), s5p_ehci_suspend(), s5p_ehci_resume(). Signed-off-by:
Vivek Gautam <gautam.vivek@samsung.com> CC: Manjunath Goudar <manjunath.goudar@linaro.org> CC: Arnd Bergmann <arnd@arndb.de> CC: Jingoo Han <jg1.han@samsung.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- Apr 09, 2013
-
-
Greg Kroah-Hartman authored
Merge tag 'for-usb-next-2012-04-08' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-next Sarah writes: xHCI misc cleanup patches for 3.10 Hi Greg, Here's three cleanup patches for 3.10. Nothing big here, just some debugging output changes, a macro rename, and a math macro change that should have no behavioral effects. Tested on the Intel Panther Point xHCI host, with USB storage and mouse, with xHCI debugging turned on. I don't have the TI host that causes the debugging output changes to trigger. Sarah Sharp
-
Manjunath Goudar authored
Separate the Qualcomm QSD/MSM on-chip host controller driver from ehci-hcd host code so that it can be built as a separate driver module. This work is part of enabling multi-platform kernels on ARM; however, note that other changes are still needed before Qualcomm QSD/MSM can be booted with a multi-platform kernel, which is not expected before 3.11. With the infrastructure added by Alan Stern in patch 3e023203 "USB: EHCI: prepare to make ehci-hcd a library module", we can avoid this problem by turning a bus glue into a separate module, as we do here for the msm bus glue. In V5 (arnd): - add FIXME about missing usb_add_hcd() or usb_remove_hcd() calls In V3: - Detailed commit message added here describing why this patch is required. - Arranged #include's in alphabetical order. - driver.name initialized hcd_name[] = "ehci-msm" in platform_driver structure initialization instead of "msm-ehci", which was the reason why it broke in EHCI USB testing In V2: Tegra patch related changes removed from this patch. Signed-off-by:
Manjunath Goudar <manjunath.goudar@linaro.org> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Acked-by:
David Brown <davidb@codeaurora.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Manjunath Goudar authored
Separate the Atmel host controller driver from ehci-hcd host code so that it can be built as a separate driver module. This work is part of enabling multi-platform kernels on ARM; however, note that other changes are still needed before Atmel can be booted with a multi-platform kernel. This is currently planned for Linux-3.11. With the infrastructure added by Alan Stern in patch 3e023203 "USB: EHCI: prepare to make ehci-hcd a library module", we can avoid this problem by turning a bus glue into a separate module, as we do here for the Atmel bus glue. In V4 (arnd): - reordered #include statements. - removed call to ehci_shutdown and the corresponding export In V3: - Detailed commit message added here about why this patch is required. - Replaced hcd_name string "ehci-atmel" to "atmel-ehci". - Inserted blank line in the Makefile to separate the EHCI drivers from the following non-EHCI drivers. - Exported ehci_shutdown symbol as it is needed by the Atmel driver. - Eliminated ehci_atmel_setup routine because hcd registers can be directly set in the ehci_atmel_drv_probe function. In V2: Resolved below compiler error. drivers/usb/host/ehci-atmel.c: In function 'ehci_atmel_drv_remove': drivers/usb/host/ehci-atmel.c:167: error: implicit declaration of function 'ehci_shutdown' Signed-off-by:
Manjunath Goudar <manjunath.goudar@linaro.org> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Manjunath Goudar authored
Separate the Samsung S5P/EXYNOS host controller driver from ehci-hcd host code so that it can be built as a separate driver module. This work is part of enabling multi-platform kernels on ARM; however, note that other changes are still needed before S5P/EXYNOS can be booted with a multi-platform kernel. We currently expect those to get merged for 3.10. With the infrastructure added by Alan Stern in patch 3e023203 "USB: EHCI: prepare to make ehci-hcd a library module", we can avoid this problem by turning a bus glue into a separate module, as we do here for the s5p bus glue. In V4 (arnd) - revert some of the pointless changes. - fix allocation of s5p specific data structure. In V3: - Detailed commit message added here, why this patch is required. - MODULE_LICENSE is GPL v2. - Added .extra_priv_size to eliminate the separate allocation of the s5p_ehci_hcd structure and removed .reset function pointer initialization. - Arranged #include's in alphabetical order. - After using extra_priv_size initialization, struct usb_hcd *hcd is redundant and can be removed from the probe function. - Eliminated s5p_ehci_phy_enable,contents of statements moved into the s5p_ehci_probe - Eliminated s5p_ehci_phy_disable, contents of statements moved into the s5p_ehci_remove. In V2: - Tegra patch related changes removed from this patch. Signed-off-by:
Manjunath Goudar <manjunath.goudar@linaro.org> Acked-by:
Jingoo Han <jg1.han@samsung.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Manjunath Goudar authored
Separate the SPEAr host controller driver from ehci-hcd host code so that it can be built as a separate driver module. This work is part of enabling multi-platform kernels on ARM; however, note that other changes are still needed before SPEAr can be booted with a multi-platform kernel, but they are queued in the arm-soc tree for 3.10. With the infrastructure added by Alan Stern in patch 3e023203 "USB: EHCI: prepare to make ehci-hcd a library module", we can avoid this problem by turning a bus glue into a separate module, as we do here for the SPEAr bus glue. In V4 (arnd): - renamed all 'struct spear_ehci' pointers from 'ehci' to the less ambiguous 'sehci'. - folded trivial spear_start_ehci/spear_stop_ehci functions into callers. - brought back initialization of ehci->caps. In V3: - Detailed commit message added here about why this patch is required. - Eliminated ehci_spear_setup routine because hcd registers can be directly set in the spear_ehci_hcd_drv_probe function. - spear_overrides struct initialized. - Converted to using .extra_priv_size for allocating spear_ehci, and updated all users of that structure. - to_spear_ehci() macro modified for spear_ehci. In V2: - Replaced spear as SPEAr everywhere, leaving functions/variables/config options. Signed-off-by:
Deepak Saxena <dsaxena@linaro.org> Signed-off-by:
Manjunath Goudar <manjunath.goudar@linaro.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Viresh Kumar <viresh.linux@gmail.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: spear-devel@list.st.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Manjunath Goudar authored
Separate the Orion host controller driver from ehci-hcd host code into its own driver module because of following reason. With the multiplatform changes in arm-soc tree, it becomes possible to enable the mvebu platform (which uses ehci-orion) at the same time as other platforms that require a conflicting EHCI bus glue. At the moment, this results in a warning like drivers/usb/host/ehci-hcd.c:1297:0: warning: "PLATFORM_DRIVER" redefined [enabled by default] drivers/usb/host/ehci-hcd.c:1277:0: note: this is the location of the previous definition drivers/usb/host/ehci-orion.c:334:31: warning: 'ehci_orion_driver' defined but not used [-Wunused-variable] and an ehci driver that only works on one of them. With the infrastructure added by Alan Stern in patch 3e023203 "USB: EHCI: prepare to make ehci-hcd a library module", we can avoid this problem by turning a bus glue into a separate module, as we do here for the orion bus glue. An earlier version of this patch was included in 3.9 but caused a regression there, which has subsequently been fixed. While we are here, use the opportunity to disabiguate the two Marvell EHCI controller implementations in Kconfig. In V4 (arnd): - Improve Kconfig text In V3: - More detail provided in commit message regarding this patch. - Replaced hcd_name string "ehci-orion" into "orion-ehci". - MODULE_LICENSE is GPL v2. - In ehci_init_driver calling second argument passed as NULL instead of ehci_orion_overrides because ehci_orion_overrides is removed. In V2: - Tegra patch related changes removed from this patch. Signed-off-by:
Manjunath Goudar <manjunath.goudar@linaro.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Jason Cooper <jason@lakedaemon.net> Tested-by:
Andrew Lunn <andrew@lunn.ch> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stefani Seibold authored
This patch add a missing usb device id for the GDMBoost V1.x device The patch is against 3.9-rc5 Signed-off-by:
Stefani Seibold <stefani@seibold.net> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Rientjes authored
Use the appropriate WARN() and WARN_ON() accessors to avoid a build error when CONFIG_BUG=n: drivers/usb/gadget/configfs.c: In function 'config_usb_cfg_unlink': drivers/usb/gadget/configfs.c:442:2: error: implicit declaration of function '__WARN_printf' drivers/usb/gadget/configfs.c: In function 'configfs_do_nothing': drivers/usb/gadget/configfs.c:733:2: error: implicit declaration of function '__WARN' Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
David Rientjes <rientjes@google.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Huang Rui authored
Signed-off-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- Apr 08, 2013
-
-
Tony Camuso authored
There are no functional changes in this patch. However, because the compliance mode timer can be deleted in more than one function, it seemed expedient to include the function name in the debug strings. Also limited the use of capitals to the first word in the compliance mode debug messages, except after a function name where all words start with lower case, in keeping with the style prevalent elsewhere in xhci.c. Signed-off-by:
Tony Camuso <tcamuso@redhat.com> Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com>
-
Greg Kroah-Hartman authored
We want the fixes here as well. Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fix from Gleb Natapov: "Bugfix for the regression introduced by commit c300aa64" * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: Allow cross page reads and writes from cached translations.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Peter Anvin: "Two quite small fixes: one a build problem, and the other fixes seccomp filters on x32." * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Fix rebuild with EFI_STUB enabled x86: remove the x32 syscall bitmask from syscall_get_nr()
-
Will Deacon authored
Interrupt handlers are always invoked with interrupts disabled, so remove all uses of the deprecated IRQF_DISABLED flag. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Reviewed-by:
Matt Turner <mattst88@gmail.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Michael Cree <mcree@orcon.net.nz> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Will Deacon authored
Linux has expected that interrupt handlers are executed with local interrupts disabled for a while now, so ensure that this is the case on Alpha even for non-device interrupts such as IPIs. Without this patch, secondary boot results in the following backtrace: warning: at kernel/softirq.c:139 __local_bh_enable+0xb8/0xd0() trace: __local_bh_enable+0xb8/0xd0 irq_enter+0x74/0xa0 scheduler_ipi+0x50/0x100 handle_ipi+0x84/0x260 do_entint+0x1ac/0x2e0 irq_exit+0x60/0xa0 handle_irq+0x98/0x100 do_entint+0x2c8/0x2e0 ret_from_sys_call+0x0/0x10 load_balance+0x3e4/0x870 cpu_idle+0x24/0x80 rcu_eqs_enter_common.isra.38+0x0/0x120 cpu_idle+0x40/0x80 rest_init+0xc0/0xe0 _stext+0x1c/0x20 A similar dump occurs if you try to reboot using magic-sysrq. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Reviewed-by:
Matt Turner <mattst88@gmail.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Michael Cree <mcree@orcon.net.nz> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Will Deacon authored
Due to all of the goodness being packed into today's kernels, the resulting image isn't as slim as it once was. In light of this, don't pass -msmall-data to gcc, which otherwise results in link failures due to impossible relocations when compiling anything but the most trivial configurations. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Reviewed-by:
Matt Turner <mattst88@gmail.com> Tested-by:
Thorsten Kranzkowski <dl8bcu@dl8bcu.de> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Michael Cree <mcree@orcon.net.nz> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jay Estabrook authored
Fixes a NULL pointer dereference at boot on UP1500. Cc: stable@vger.kernel.org Reviewed-and-Tested-by:
Matt Turner <mattst88@gmail.com> Signed-off-by:
Jay Estabrook <jay.estabrook@gmail.com> Signed-off-by:
Matt Turner <mattst88@gmail.com> Signed-off-by:
Michael Cree <mcree@orcon.net.nz> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- Apr 07, 2013
-
-
Andrew Honig authored
This patch adds support for kvm_gfn_to_hva_cache_init functions for reads and writes that will cross a page. If the range falls within the same memslot, then this will be a fast operation. If the range is split between two memslots, then the slower kvm_read_guest and kvm_write_guest are used. Tested: Test against kvm_clock unit tests. Signed-off-by:
Andrew Honig <ahonig@google.com> Signed-off-by:
Gleb Natapov <gleb@redhat.com>
-
- Apr 06, 2013
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dmLinus Torvalds authored
Pull device-mapper fixes from Alasdair Kergon: "A pair of patches to fix the writethrough mode of the device-mapper cache target when the device being cached is not itself wrapped with device-mapper." * tag 'dm-3.9-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: dm cache: reduce bio front_pad size in writeback mode dm cache: fix writes to cache device in writethrough mode
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fixes from Bjorn Helgaas: "PCI updates for v3.9: ASPM Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus" kexec PCI: Don't try to disable Bus Master on disconnected PCI devices Platform ROM images PCI: Add PCI ROM helper for platform-provided ROM images nouveau: Attempt to use platform-provided ROM image radeon: Attempt to use platform-provided ROM image Hotplug PCI/ACPI: Always resume devices on ACPI wakeup notifications PCI/PM: Disable runtime PM of PCIe ports EISA EISA/PCI: Fix bus res reference EISA/PCI: Init EISA early, before PNP" * tag 'pci-v3.9-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/PM: Disable runtime PM of PCIe ports PCI/ACPI: Always resume devices on ACPI wakeup notifications PCI: Don't try to disable Bus Master on disconnected PCI devices Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus" radeon: Attempt to use platform-provided ROM image nouveau: Attempt to use platform-provided ROM image EISA/PCI: Init EISA early, before PNP EISA/PCI: Fix bus res reference PCI: Add PCI ROM helper for platform-provided ROM images
-
Jiri Slaby authored
tty_port_tty_get might return a tty which is NULL. But it is dereferenced unconditionally in edge_send. Stop dereferencing that by sending usb_serial_port pointer around. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Johan Hovold <jhovold@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usbGreg Kroah-Hartman authored
Felipe writes: usb: patches for v3.10 merge window Here is the big Gadget & PHY pull request. Many of us have been really busy lately getting multiple drivers to a better position. Since this pull request is so large, I will divide it in sections so it's easier to grasp what's included. - cleanups: . UDC drivers no longer touch gadget->dev, that's now udc-core responsibility . Many more UDC drivers converted to usb_gadget_map/unmap_request() . UDC drivers no longer initialize DMA-related fields from gadget's device structure . UDC drivers don't touch gadget.dev.driver directly . UDC drivers don't assign gadget.dev.release directly . Removal of some unused DMA_ADDR_INVALID . Introduction of CONFIG_USB_PHY . All phy drivers have been moved to drivers/usb/phy and renamed to a common naming scheme . Fix PHY layer so it never returns a NULL pointer, also fix all callers to avoid using IS_ERR_OR_NULL() . Sparse fixes all over the place . drivers/usb/otg/ has been deleted . Marvel drivers (mv_udc, ehci-mv, mv_otg and mv_u3d) improved clock usage - new features: . UDC core now provides a generic way for tracking and reporting UDC's state (not attached, resuming, suspended, addressed, default, etc) . twl4030-usb learned that it shouldn't be enabled during init . Full DT support for DWC3 has been implemented . ab8500-usb learned about pinctrl framework . nop PHY learned about DeviceTree and regulators . DWC3 learned about suspend/resume . DWC3 can now be compiled in host-only and gadget-only (as well as DRD) configurations . UVC now enables streaming endpoint based on negotiated speed . isp1301 now implements the PHY API properly . configfs-based interface for gadget drivers which will lead to the removal of all code which just combines functions together to build functional gadget drivers. . f_serial and f_obex were converted to new configfs interface while maintaining old interface around. - non-critical fixes: . UVC gadget driver got fixes for Endpoint usage and stream calculation . ab8500-usb fixed unbalanced clock and regulator API usage . twl4030-usb got a fix for when OMAP3 is booted with cable connected . fusb300_udc got a fix for DMA usage . UVC got fixes for two assertions of the USB Video Class Compliance specification revision 1.1 . build warning issues caused by recent addition of __must_check to regulator API These are all changes which deserve a mention, all other changes are related to these one or minor spelling fixes and other similar tasks. Signed-of-by:
Felipe Balbi <balbi@ti.com>
-
Dan Carpenter authored
"len" comes from the USB transfer and it's probably correct. The thing is that we already have similar checks like: if (data[i] >= serial->num_ports) { So adding a sanity test here matches the rest of the code and is a good idea. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
We can remove the "if (urb->actual_length) {" check because checking for "while (i < urb->actual_length) {" is sufficient. This lets us pull the code in one indent level. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Grzeschik authored
In hardware_enqueue code adds one extra td with dma_pool_alloc if mReq->req.zero is true. When _ep_nuke will be called for that endpoint, dma_pool_free will not be called to free that memory again. That patch fixes this. Cc: stable <stable@vger.kernel.org> # v3.5 Signed-off-by:
Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix erroneous sock_orphan() leading to crashes and double kfree_skb() in NFC protocol. From Thierry Escande and Samuel Ortiz. 2) Fix use after free in remain-on-channel mac80211 code, from Johannes Berg. 3) nf_reset() needs to reset the NF tracing cookie, otherwise we can leak it from one namespace into another. Fix from Gao Feng and Patrick McHardy. 4) Fix overflow in channel scanning array of mwifiex driver, from Stone Piao. 5) Fix loss of link after suspend/shutdown in r8169, from Hayes Wang. 6) Synchronization of unicast address lists to the undelying device doesn't work because whether to sync is maintained as a boolean rather than a true count. Fix from Vlad Yasevich. 7) Fix corruption of TSO packets in atl1e by limiting the segmented packet length. From Hannes Frederic Sowa. 8) Revert bogus AF_UNIX credential passing change and fix the coalescing issue properly, from Eric W Biederman. 9) Changes of ipv4 address lifetime settings needs to generate a notification, from Jiri Pirko. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (22 commits) netfilter: don't reset nf_trace in nf_reset() net: ipv4: notify when address lifetime changes ixgbe: fix registration order of driver and DCA nofitication af_unix: If we don't care about credentials coallesce all messages Revert "af_unix: dont send SCM_CREDENTIAL when dest socket is NULL" bonding: remove sysfs before removing devices atl1e: limit gso segment size to prevent generation of wrong ip length fields net: count hw_addr syncs so that unsync works properly. r8169: fix auto speed down issue netfilter: ip6t_NPT: Fix translation for non-multiple of 32 prefix lengths mwifiex: limit channel number not to overflow memory NFC: microread: Fix build failure due to a new MEI bus API iwlwifi: dvm: fix the passive-no-RX workaround netfilter: nf_conntrack: fix error return code NFC: llcp: Keep the connected socket parent pointer alive mac80211: fix idle handling sequence netfilter: nfnetlink_acct: return -EINVAL if object name is empty netfilter: nfnetlink_queue: fix error return code in nfnetlink_queue_init() netfilter: reset nf_trace in nf_reset mac80211: fix remain-on-channel cancel crash ...
-
Jan Beulich authored
eboot.o and efi_stub_$(BITS).o didn't get added to "targets", and hence their .cmd files don't get included by the build machinery, leading to the files always getting rebuilt. Rather than adding the two files individually, take the opportunity and add $(VMLINUX_OBJS) to "targets" instead, thus allowing the assignment at the top of the file to be shrunk quite a bit. At the same time, remove a pointless flags override line - the variable assigned to was misspelled anyway, and the options added are meaningless for assembly sources. [ hpa: the patch is not minimal, but I am taking it for -urgent anyway since the excess impact of the patch seems to be small enough. ] Signed-off-by:
Jan Beulich <jbeulich@suse.com> Link: http://lkml.kernel.org/r/515C5D2502000078000CA6AD@nat28.tlf.novell.com Cc: Matthew Garrett <mjg@redhat.com> Cc: Matt Fleming <matt.fleming@intel.com> Signed-off-by:
H. Peter Anvin <hpa@linux.intel.com>
-
Michael Grzeschik authored
The udc uses an shared dma memory space between hard and software. This memory layout is described in ci13xxx_qh and ci13xxx_td which are marked with the attribute ((packed)). The compiler currently does not know about the alignment of the memory layout, and will create strb and ldrb operations. The Datasheet of the synopsys core describes, that some operations on the mapped memory need to be atomic double word operations. I.e. the next pointer addressing in the qhead, as otherwise the hardware will read wrong data and totally stuck. This is also possible while working with the current active td queue, and preparing the td->ptr.next in software while the hardware is still working with the current active td which is supposed to be changed: writeb(0xde, &td->ptr.next + 0x0); /* strb */ writeb(0xad, &td->ptr.next + 0x1); /* strb */ <----- hardware reads value of td->ptr.next and get stuck! writeb(0xbe, &td->ptr.next + 0x2); /* strb */ writeb(0xef, &td->ptr.next + 0x3); /* strb */ This appeares on armv5 machines where the hardware does not support unaligned 32bit operations. This patch adds the attribute ((aligned(4))) to the structures to tell the compiler to use 32bit operations. It also adds an wmb() for the prepared TD data before it gets enqueued into the qhead. Cc: stable <stable@vger.kernel.org> # v3.5 Signed-off-by:
Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Patrick McHardy authored
Commit 130549fe ("netfilter: reset nf_trace in nf_reset") added code to reset nf_trace in nf_reset(). This is wrong and unnecessary. nf_reset() is used in the following cases: - when passing packets up the the socket layer, at which point we want to release all netfilter references that might keep modules pinned while the packet is queued. nf_trace doesn't matter anymore at this point. - when encapsulating or decapsulating IPsec packets. We want to continue tracing these packets after IPsec processing. - when passing packets through virtual network devices. Only devices on that encapsulate in IPv4/v6 matter since otherwise nf_trace is not used anymore. Its not entirely clear whether those packets should be traced after that, however we've always done that. - when passing packets through virtual network devices that make the packet cross network namespace boundaries. This is the only cases where we clearly want to reset nf_trace and is also what the original patch intended to fix. Add a new function nf_reset_trace() and use it in dev_forward_skb() to fix this properly. Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: "Fixes for a number of small glitches in various corners of the MIPS tree. No particular areas is standing out. With this applied all MIPS defconfigs are building fine. No merge conflicts are expected." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Delete definition of SA_RESTORER. MIPS: Fix ISA level which causes secondary cache init bypassing and more MIPS: Fix build error cavium-octeon without CONFIG_SMP MIPS: Kconfig: Rename SNIPROM too MIPS: Alchemy: Fix typo "CONFIG_DEBUG_PCI" MIPS: Unbreak function tracer for 64-bit kernel.
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixesLinus Torvalds authored
Pull GFS2 fixes from Steven Whitehouse: "There are two patches which fix up a couple of minor issues in the DLM interface code, a missing error path in gfs2_rs_alloc(), one patch which fixes a problem during "withdraw" and a fix for discards/FITRIM when using 4k sector sized devices." * git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes: GFS2: Issue discards in 512b sectors GFS2: Fix unlock of fcntl locks during withdrawn state GFS2: return error if malloc failed in gfs2_rs_alloc() GFS2: use memchr_inv GFS2: use kmalloc for lvb bitmap
-
Mike Marciniszyn authored
Commit e2eed58b ("IB/qib: change QLogic to Intel") moved a firmware file potentially breaking the ABI. This patch reverts that aspect of the fix as well as reverting the firmware name as used in qib. Reported-by:
David Woodhouse <dwmw2@infradead.org> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/miscLinus Torvalds authored
Pull spi fixes from Mark Brown: "A bunch of small driver fixes plus a fix for error handling in the core - nothing too exciting overall." * tag 'spi-fix-v3.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc: spi/mpc512x-psc: optionally keep PSC SS asserted across xfer segmensts spi: Unlock a spinlock before calling into the controller driver. spi/s3c64xx: modified error interrupt handling and init spi/bcm63xx: don't disable non enabled clocks in probe error path spi/bcm63xx: Remove unused variable spi: slink-tegra20: move runtime pm calls to transfer_one_message
-
Bob Peterson authored
This patch changes GFS2's discard issuing code so that it calls function sb_issue_discard rather than blkdev_issue_discard. The code was calling blkdev_issue_discard and specifying the correct sector offset and sector size, but blkdev_issue_discard expects these values to be in terms of 512 byte sectors, even if the native sector size for the device is different. Calling sb_issue_discard with the BLOCK size instead ensures the correct block-to-512b-sector translation. I verified that "minlen" is specified in blocks, so comparing it to a number of blocks is correct. Signed-off-by:
Bob Peterson <rpeterso@redhat.com> Signed-off-by:
Steven Whitehouse <swhiteho@redhat.com>
-
Johan Hovold authored
This reverts commit 0ef1594c . This patch introduced a few races which cannot be easily fixed with a small follow-up patch. Furthermore, the SoC with the broken hardware register, which this patch intended to add support for, can only be used with device trees, which this driver currently does not support. [ Here is the discussion that led to this "revert" patch: https://lkml.org/lkml/2013/4/3/176 ] Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://gitorious.org/linux-omap-dss2/linuxLinus Torvalds authored
Pull fbdev fixes from Tomi Valkeinen: "Fix uvesafb crash bug and typoed flag name in fbmon's new videomode code" * tag 'fbdev-fixes-3.9-rc6' of git://gitorious.org/linux-omap-dss2/linux: video:uvesafb: Fix dereference NULL pointer code path fbmon: use VESA_DMT_VSYNC_HIGH to fix typo
-