In the case of division by zero in a BPF program:
	A = A / X;  (X == 0)
the expected behavior is to terminate with return value 0.

This is confirmed by the test case introduced in commit 86bf1721
("test_bpf: add tests checking that JIT/interpreter sets A and X to 0.").

Reported-by: Yang Shi <yang.shi@linaro.org>
Tested-by: Yang Shi <yang.shi@linaro.org>
CC: Xi Wang <xi.wang@gmail.com>
CC: Alexei Starovoitov <ast@plumgrid.com>
CC: linux-arm-kernel@lists.infradead.org
CC: linux-kernel@vger.kernel.org
Fixes: e54bcde3 ("arm64: eBPF JIT compiler")
Cc: <stable@vger.kernel.org> # 3.18+
Signed-off-by: Zi Shen Lim <zlim.lnx@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

CONFIG_CRYPTO_CRC32_ARM64 has been around since commit f6f203fa
("crypto: crc32 - Add ARM64 CRC32 hw accelerated module") but defconfig
did not automatically enable it.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

The current arm64 __cmpxchg_double{_mb} implementations carry out the
compare exchange by first comparing the old values passed in to the
values read from the pointer provided and by stashing the cumulative
bitwise difference in a 64-bit register.

By comparing the register content against 0, it is possible to detect if
the values read differ from the old values passed in, so that the compare
exchange detects whether it has to bail out or carry on completing the
operation with the exchange.

Given the current implementation, to detect the cmpxchg operation
status, the __cmpxchg_double{_mb} functions should return the 64-bit
stashed bitwise difference so that the caller can detect cmpxchg failure
by comparing the return value content against 0. The current implementation
declares the return value as an int, which means that the 64-bit
value stashing the bitwise difference is truncated before being
returned to the __cmpxchg_double{_mb} callers, which means that
any bitwise difference present in the top 32 bits goes undetected,
triggering false positives and subsequent kernel failures.

This patch fixes the issue by declaring the arm64 __cmpxchg_double{_mb}
return values as a long, so that the bitwise difference is
properly propagated on failure, restoring the expected behaviour.

Fixes: e9a4b795 ("arm64: cmpxchg_dbl: patch in lse instructions when supported by the CPU")
Cc: <stable@vger.kernel.org> # 4.3+
Cc: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Now that we strictly forbid absolute relocations in libstub code,
make sure that we don't emit any when CONFIG_MODVERSIONS is enabled,
by stripping the kcrctab sections from the object file. This fixes
a build problem under CONFIG_MODVERSIONS=y.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Make sure that the task scheduler domain hierarchy is set-up correctly
on systems with single or multi-cluster topology.

Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Punit Agrawal <punit.agrawal@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Now that we added special handling to the C files in libstub, move
the one remaining arm64 specific EFI stub C file to libstub as
well, so that it gets the same treatment. This should prevent future
changes from resulting in binaries that may execute incorrectly in
UEFI context.

With efi-entry.S the only remaining EFI stub source file under
arch/arm64, we can also simplify the Makefile logic somewhat.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

A kernel built with DEBUG_RO_DATA && !CONFIG_DEBUG_ALIGN_RODATA doesn't
have .text aligned to a page boundary, though fixup_executable works at
page-granularity thanks to its use of create_mapping. If .text is not
page-aligned, the first page it exists in may be marked non-executable,
leading to failures when an attempt is made to execute code in said
page.

This patch upgrades ALIGN_DEBUG_RO and ALIGN_DEBUG_RO_MIN to force page
alignment for DEBUG_RO_DATA && !CONFIG_DEBUG_ALIGN_RODATA kernels,
ensuring that all sections with specific RWX permission requirements are
mapped with the correct permissions.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Laura Abbott <laura@labbott.name>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Fixes: da141706 ("arm64: add better page protections to arm64")
Cc: <stable@vger.kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Trying to build with CONFIG_ZONE_DMA=n leaves visible references
to the now-undefined ZONE_DMA, resulting in a syntax error.

Hide the references behind an #ifdef instead of using IS_ENABLED.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

For reasons not entirely apparent, but now enshrined in history, the
architectural mapping of AArch32 banked registers to AArch64 registers
actually orders SP_<mode> and LR_<mode> backwards compared to the
intuitive r13/r14 order, for all modes except FIQ.

Fix the compat_<reg>_<mode> macros accordingly, in the hope of avoiding
subtle bugs with KVM and AArch32 guests.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Increase the standard cacheline size to avoid having locks in the same
cacheline.

Cavium's ThunderX core implements cache lines of 128 byte size. With
current granulare size of 64 bytes (L1_CACHE_SHIFT=6) two locks could
share the same cache line leading a performance degradation.
Increasing the size fixes that.

Increasing the size has no negative impact to cache invalidation on
systems with a smaller cache line. There is an impact on memory usage,
but that's not too important for arm64 use cases.

Signed-off-by: Tirumalesh Chalamarla <tchalamarla@cavium.com>
Signed-off-by: Robert Richter <rrichter@cavium.com>
Acked-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

The comparison between TASK_SIZE_64 and MODULES_VADDR does not
make any sense on arm64, it is simply something that has been
carried over from the ARM port which arm64 is based on. So drop it.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

It allows a selectable timer interrupt frequency of 100, 250, 300 and 1000 HZ.
We will get better performance when choose a suitable frequency in some scene.

Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

The <linux/mm.h> already provides the PAGE_ALIGNED macro. Let's
use this macro instead of IS_ALIGNED and passing PAGE_SIZE directly.

Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Acked-by: Laura Abbott <laura@labbott.name>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

test_bit and set_bit take the bit number to operate on, rather than a
mask. This patch fixes the ICACHEF_* definitions so that they represent
the bit index in __icache_flags as opposed to the mask returned by the
BIT macro.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

enable_cpu_capabilities is only called from within cpufeature.c, so it
can be declared static.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This is an incremental fix for a patch previously pulled from tip
irq/for-arm.

* 'irq/for-arm' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Make the cpuhotplug migration code less noisy

The original arm code has a pr_debug() statement for the case where
the irq chip has no set_affinity() callback. That's sufficient for
debugging and we really don't want to spam dmesg with useless warnings
for the normal case.

Fixes: f1e0bb0a: "genirq: Introduce generic irq migration for cpu hotunplug"
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Requested-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Jiang Liu <jiang.liu@linux.intel.com>

The hwcap string arrays used for generating the contents of
/proc/cpuinfo are currently arrays of non-const pointers.

There's no need for these pointers to be mutable, so this patch makes
them const so that they can be moved to .rodata.

Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Use the system wide safe value from the new API for safer
decisions

Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: kvmarm@lists.cs.columbia.edu
Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Tested-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Use the system wide value of ID_AA64DFR0 to make safer decisions

Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Tested-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

The FP/ASIMD is detected in fpsimd_init(), which is built-in
unconditionally. Lets move the hwcap handling to the central place.

Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Tested-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Extend struct arm64_cpu_capabilities to handle the HWCAP detection
and make use of the system wide value of the feature registers for
a reliable set of HWCAPs.

Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Tested-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Now that we can reliably read the system wide safe value for a
feature register, use that to compute the system capability.
This patch also replaces the 'feature-register-specific'
methods with a generic routine to check the capability.

Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Tested-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

At the moment we run through the arm64_features capability list for
each CPU and set the capability if one of the CPU supports it. This
could be problematic in a heterogeneous system with differing capabilities.
Delay the CPU feature checks until all the enabled CPUs are up(i.e,
smp_cpus_done(), so that we can make better decisions based on the
overall system capability. Once we decide and advertise the capabilities
the alternatives can be applied. From this state, we cannot roll back
a feature to disabled based on the values from a new hotplugged CPU,
due to the runtime patching and other reasons. So, for all new CPUs,
we need to make sure that they have the established system capabilities.
Failing which, we bring the CPU down, preventing it from turning online.
Once the capabilities are decided, any new CPU booting up goes through
verification to ensure that it has all the enabled capabilities and also
invokes the respective enable() method on the CPU.

The CPU errata checks are not delayed and is still executed per-CPU
to detect the respective capabilities. If we ever come across a non-errata
capability that needs to be checked on each-CPU, we could introduce them via
a new capability table(or introduce a flag), which can be processed per CPU.

The next patch will make the feature checks use the system wide
safe value of a feature register.

NOTE: The enable() methods associated with the capability is scheduled
on all the CPUs (which is the only use case at the moment). If we need
a different type of 'enable()' which only needs to be run once on any CPU,
we should be able to handle that when needed.

Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Tested-by: Dave Martin <Dave.Martin@arm.com>
[catalin.marinas@arm.com: static variable and coding style fixes]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

check_cpu_capabilities runs through a given list of caps and
checks if the system has the cap, updates the system capability
bitmap and also runs any enable() methods associated with them.
All of this is not quite obvious from the name 'check'. This
patch splits the check_cpu_capabilities into two parts :

1) update_cpu_capabilities
 => Runs through the given list and updates the system
    wide capability map.
2) enable_cpu_capabilities
 => Runs through the given list and invokes enable() (if any)
    for the caps enabled on the system.

Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Suggested-by: Catalin Marinas <catalin.marinsa@arm.com>
Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Tested-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Make use of the system wide safe register to decide the support
for mixed endian.

Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Tested-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Add an API for reading the safe CPUID value across the
system from the new infrastructure.

Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Tested-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This patch consolidates the CPU Sanity check to the new infrastructure.

Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Tested-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This patch adds an infrastructure to keep track of the CPU feature
registers on the system. For each register, the infrastructure keeps
track of the system wide safe value of the feature bits. Also, tracks
the which fields of a register should be matched strictly across all
the CPUs on the system for the SANITY check infrastructure.

The feature bits are classified into following 3 types depending on
the implication of the possible values. This information is used to
decide the safe value for a feature.

LOWER_SAFE  - The smaller value is safer
HIGHER_SAFE - The bigger value is safer
EXACT       - We can't decide between the two, so a predefined safe_value is used.

This infrastructure will be later used to make better decisions for:

 - Kernel features (e.g, KVM, Debug)
 - SANITY Check
 - CPU capability
 - ELF HWCAP
 - Exposing CPU Feature register to userspace.

Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Tested-by: Dave Martin <Dave.Martin@arm.com>
[catalin.marinas@arm.com: whitespace fix]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Introduce a helper to extract cpuid feature for any given
width.

Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Tested-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This patch moves the /proc/cpuinfo handling code:

arch/arm64/kernel/{setup.c to cpuinfo.c}

No functional changes

Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Tested-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Move the mixed endian support detection code to cpufeature.c
from cpuinfo.c. This also moves the update_cpu_features()
used by mixed endian detection code, which will get more
functionality.

Also moves the ID register field shifts to asm/sysreg.h,
where all the useful definitions will end up in later patches.

Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Tested-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This patch moves the CPU feature detection code from
 arch/arm64/kernel/{setup.c to cpufeature.c}

The plan is to consolidate all the CPU feature handling
in cpufeature.c.

Apart from changing pr_fmt from "alternatives" to "cpu features",
there are no functional changes.

Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Tested-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

At the moment the boot CPU stores the cpuinfo long before the
PERCPU areas are initialised by the kernel. This could be problematic
as the non-boot CPU data structures might get copied with the data
from the boot CPU, giving us no chance to detect if a particular CPU
updated its cpuinfo. This patch delays the boot cpu store to
smp_prepare_boot_cpu().

Also kills the setup_processor() which no longer does meaningful
work.

Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Tested-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Delay the ELF HWCAP initialisation until all the (enabled) CPUs are
up, i.e, smp_cpus_done(). This is in preparation for detecting the
common features across the CPUS and creating a consistent ELF HWCAP
for the system.

Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Tested-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

At early boot, we print the CPU version/revision. On a heterogeneous
system, we could have different types of CPUs. Print the CPU info for
all active cpus. Also, the secondary CPUs prints the message only when
they turn online.

Also, remove the redundant 'revision' information which doesn't
make any sense without the 'variant' field.

Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Tested-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Commit 21539939 (arm64: 36 bit VA) introduced 36-bit VA support for
the arm64 kernel when the 16KB page configuration is enabled. While this
is a valid hardware configuration, it's not something we want to
encourage since it reduces the memory (and I/O) range that the kernel
can access. Make this depend on EXPERT to avoid complaints of Linux not
mapping the whole RAM, especially on platforms following the ARM
recommended memory map.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Unlike perf callchain relying on walk_stackframe(), dump_backtrace()
has its own backtrace logic. A major difference between them is the
moment a symbol is recorded. Perf writes down a symbol *before*
calling unwind_frame(), but dump_backtrace() prints it out *after*
unwind_frame(). As a result, the last valid symbol cannot be hooked
in case of dump_backtrace(). This patch addresses the issue as
synchronising dump_backtrace() with perf callchain.

A simple test and its results are as follows:

- crash trigger

 $ sudo echo c > /proc/sysrq-trigger

- current status

 Call trace:
 [<fffffe00003dc738>] sysrq_handle_crash+0x24/0x30
 [<fffffe00003dd2ac>] __handle_sysrq+0x128/0x19c
 [<fffffe00003dd730>] write_sysrq_trigger+0x60/0x74
 [<fffffe0000249fc4>] proc_reg_write+0x84/0xc0
 [<fffffe00001f2638>] __vfs_write+0x44/0x104
 [<fffffe00001f2e60>] vfs_write+0x98/0x1a8
 [<fffffe00001f3730>] SyS_write+0x50/0xb0

- with this change

 Call trace:
 [<fffffe00003dc738>] sysrq_handle_crash+0x24/0x30
 [<fffffe00003dd2ac>] __handle_sysrq+0x128/0x19c
 [<fffffe00003dd730>] write_sysrq_trigger+0x60/0x74
 [<fffffe0000249fc4>] proc_reg_write+0x84/0xc0
 [<fffffe00001f2638>] __vfs_write+0x44/0x104
 [<fffffe00001f2e60>] vfs_write+0x98/0x1a8
 [<fffffe00001f3730>] SyS_write+0x50/0xb0
 [<fffffe00000939ec>] el0_svc_naked+0x20/0x28

Note that this patch does not cover a case where MMU is disabled. The
last stack frame of swapper, for example, has PC in a form of physical
address. Unfortunately, a simple conversion using phys_to_virt() cannot
cover all scenarios since PC is retrieved from LR - 4, not LR. It is
a big tradeoff to change both head.S and unwind_frame() for only a few
of symbols in *.S. Thus, this hunk does not take care of the case.

Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: James Morse <james.morse@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Currently, if cpuidle is disabled or not supported, powertop reports
zero wakeups and zero events. This is due to the cpu_idle tracepoints
are missing.

This patch is to make cpu_idle tracepoints always available even if
cpuidle is disabled or not supported.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

36bit VA lets us use 2 level page tables while limiting the
available address space to 64GB.

Cc: Will Deacon <will.deacon@arm.com>
Cc: Steve Capper <steve.capper@linaro.org>
Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>