Adding bcm2835-sdhost driver, and an overlay to enable it

BCM2835 has two SD card interfaces. This driver uses the other one.

bcm2835-sdhost: Error handling fix, and code clarification

bcm2835-sdhost: Adding overclocking option

Allow a different clock speed to be substitued for a requested 50MHz.
This option is exposed using the "overclock_50" DT parameter.
Note that the sdhost interface is restricted to integer divisions of
core_freq, and the highest sensible option for a core_freq of 250MHz
is 84 (250/3 = 83.3MHz), the next being 125 (250/2) which is much too
high.

Use at your own risk.

bcm2835-sdhost: Round up the overclock, so 62 works for 62.5Mhz

Also only warn once for each overclock setting.

bcm2835-sdhost: Improve error handling and recovery

1) Expose the hw_reset method to the MMC framework, removing many
   internal calls by the driver.

2) Reduce overclock setting on error.

3) Increase timeout to cope with high capacity cards.

4) Add properties and parameters to control pio_limit and debug.

5) Reduce messages at probe time.

bcm2835-sdhost: Further improve overclock back-off

bcm2835-sdhost: Clear HBLC for PIO mode

Also update pio_limit default in overlay README.

bcm2835-sdhost: Add the ERASE capability

See: https://github.com/raspberrypi/linux/issues/1076

bcm2835-sdhost: Ignore CRC7 for MMC CMD1

It seems that the sdhost interface returns CRC7 errors for CMD1,
which is the MMC-specific SEND_OP_COND. Returning these errors to
the MMC layer causes a downward spiral, but ignoring them seems
to be harmless.

bcm2835-mmc/sdhost: Remove ARCH_BCM2835 differences

The bcm2835-mmc driver (and -sdhost driver that copied from it)
contains code to handle SDIO interrupts in a threaded interrupt
handler rather than waking the MMC framework thread. The change
follows a patch from Russell King that adds the facility as the
preferred way of working.

However, the new code path is only present in ARCH_BCM2835
builds, which I have taken to be a way of testing the waters
rather than making the change across the board; I can't see
any technical reason why it wouldn't be enabled for MACH_BCM270X
builds. So this patch standardises on the ARCH_BCM2835 code,
removing the old code paths.

bcm2835-sdhost: Don't log timeout errors unless debug=1

The MMC card-discovery process generates timeouts. This is
expected behaviour, so reporting it to the user serves no purpose.
Suppress the reporting of timeout errors unless the debug flag
is on.