lirc: added support for RaspberryPi GPIO

lirc_rpi: Use read_current_timer to determine transmitter delay. Thanks to jjmz and others
See: https://github.com/raspberrypi/linux/issues/525



lirc: Remove restriction on gpio pins that can be used with lirc

Compute Module, for example could use different pins

lirc_rpi: Add parameter to specify input pin pull

Depending on the connected IR circuitry it might be desirable to change the
gpios internal pull from it pull-down default behaviour. Add a module
parameter to allow the user to set it explicitly.

Signed-off-by: Julian Scheel <julian@jusst.de>

lirc-rpi: Use the higher-level irq control functions

This module used to access the irq_chip methods of the
gpio controller directly, rather than going through the
standard enable_irq/irq_set_irq_type functions. This
caused problems on pinctrl-bcm2835 which only implements
the irq_enable/disable methods and not irq_unmask/mask.

lirc-rpi: Correct the interrupt usage

1) Correct the use of enable_irq (i.e. don't call it so often)
2) Correct the shutdown sequence.
3) Avoid a bcm2708_gpio driver quirk by setting the irq flags earlier