This fixes a data corruption bug when using discard on top of MD linear,
raid0 and raid10 personalities.

Commit 20d0189b

 "block: Introduce new bio_split()" permits sharing
the bio_vec between the two resulting bios. That is fine for read/write
requests where the bio_vec is immutable. For discards, however, we need
to be able to attach a payload and update the bio_vec so the page can
get mapped to a scatterlist entry. Therefore the bio_vec can not be
shared when splitting discards and we must do a full clone.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reported-by: Seunguk Shin <seunguk.shin@samsung.com>
Tested-by: Seunguk Shin <seunguk.shin@samsung.com>
Cc: Seunguk Shin <seunguk.shin@samsung.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: <stable@vger.kernel.org> # v3.14+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

bio_associate_blkcg(), bio_associate_current() and wbc_account_io()
are used to implement cgroup writeback support for filesystems and
thus need to be exported.  Export them.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jens Axboe <axboe@fb.com>

When a blkcg configuration is targeted to a partition rather than a
whole device, blkg_conf_prep fails with -EINVAL; unfortunately, it
forgets to put the gendisk ref in that case.  Fix it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>

end_cmd finishes request associated with nullb_cmd struct, so we
should save pointer to request_queue in a local variable before
calling end_cmd.

The problem was causes general protection fault with slab poisoning
enabled.

Fixes: 8b70f45e

 ("null_blk: restart request processing on completion handler")
Tested-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

This reverts commit a2673b6e

.

Kinglong Mee reports a memory leak with that patch, and Jan Kara confirms:

 "Thanks for report! You are right that my patch introduces a race
  between fsnotify kthread and fsnotify_destroy_group() which can result
  in leaking inotify event on group destruction.

  I haven't yet decided whether the right fix is not to queue events for
  dying notification group (as that is pointless anyway) or whether we
  should just fix the original problem differently...  Whenever I look
  at fsnotify code mark handling I get lost in the maze of locks, lists,
  and subtle differences between how different notification systems
  handle notification marks :( I'll think about it over night"

and after thinking about it, Jan says:

 "OK, I have looked into the code some more and I found another
  relatively simple way of fixing the original oops.  It will be IMHO
  better than trying to fixup this issue which has more potential for
  breakage.  I'll ask Linus to revert the fsnotify fix he already merged
  and send a new fix"

Reported-by: Kinglong Mee <kinglongmee@gmail.com>
Requested-by: Jan Kara <jack@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull pin control fixes from Linus Walleij:
 "Here are some overly ripe pin control fixes for the v4.2 series.

  They got delayed because of various crap commits and having to clean
  and rinse the patch stack a few times.  Now they are however looking
  good.

   - some dead defines dropped from the Samsung driver, was targeted for
     -rc2 but got delayed
   - drop the strict mode from abx500, this was too strict
   - fix the R-Car sparse IRQs code to work as intended
   - fix the IRQ code for the pinctrl-single GPIO backend to not enforce
     threaded IRQs
   - clear the latched events/IRQs for the Broadcom BCM2835 driver
   - fix up debugfs for the Freescale imx1 driver
   - fix a typo bug in the Schmitt Trigger setup in the LPC18xx driver"

* tag 'pinctrl-v4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: lpc18xx: fix schmitt trigger setup
  Subject: pinctrl: imx1-core: Fix debug output in .pin_config_set callback
  pinctrl: bcm2835: Clear the event latch register when disabling interrupts
  pinctrl: single: ensure pcs irq will not be forced threaded
  sh-pfc: fix sparse GPIOs for R-Car SoCs
  pinctrl: abx500: remove strict mode
  pinctrl: samsung: Remove old unused defines

Pull UDF fix from Jan Kara:
 "A fix for UDF corruption when certain disk-format feature is enabled"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Don't corrupt unalloc spacetable when writing it

Merge tag 'trace-v4.2-rc2-fix2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing sample code fix from Steven Rostedt:
 "He Kuang noticed that the sample code using the trace_event helper
  function __get_dynamic_array_len() is broken.

  This only changes the sample code, and I'm pushing this now instead of
  later because I don't want others using the broken code as an example
  when using it for real"

* tag 'trace-v4.2-rc2-fix2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix sample output of dynamic arrays

Pull s390 fix from Martin Schwidefsky:
 "Fast path fix for the thread_struct breakage"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: adapt entry.S to the move of thread_struct

Pull AVR32 update from Hans-Christian Egtvedt.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32:
  AVR32/time: Migrate to new 'set-state' interface

git commit 0c8c0f03


"x86/fpu, sched: Dynamically allocate 'struct fpu'"
moved the thread_struct to the end of the task_struct.

This causes some of the offsets used in entry.S to overflow their
instruction operand field. To fix this  use aghi to create a
dedicated pointer for the thread_struct.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Migrate avr32 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

We want to call cpu_idle_poll_ctrl() in shutdown only if we were in
oneshot or resume state earlier. Create another variable to save this
information and check that in shutdown callback.

Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>

The param_val variable is what determines if schmitt
trigger is enabled on a pin or not. A typo here mean
that schmitt trigger was always enabled for standard
and i2c pins.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

imx1_pinconf_set assumes that the array of pins in struct
imx1_pinctrl_soc_info can be indexed by pin id to get the
pinctrl_pin_desc for a pin. This used to be correct up to commit
607af165 which removed some entries from the array and so made it
wrong to access the array by pin id.

The result of this bug is a wrong pin name in the output for small pin
ids and an oops for the bigger ones.

This patch is the result of a discussion that includes patches by Markus
Pargmann and Chris Ruehl.

Fixes: 607af165

 ("pinctrl: i.MX27: Remove nonexistent pad definitions")
Cc: stable@vger.kernel.org
Reported-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

It's possible to hit a race condition if interrupts are generated on a GPIO
pin when the IRQ line in question is being disabled.

If the interrupt is freed, bcm2835_gpio_irq_disable() is called which
disables the event generation sources (edge, level). If an event occurred
between the last disabling of hard IRQs and the write to the event
source registers, a bit would be set in the GPIO event detect register
(GPEDSn) which goes unacknowledged by bcm2835_gpio_irq_handler()
so Linux complains loudly.

There is no per-GPIO mask register, so when disabling GPIO interrupts
write 1 to the relevant bit in GPEDSn to clear out any stale events.

Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The PSC IRQ is requested using request_irq() API and as result it can
be forced to be threaded IRQ in RT-Kernel if PCS_QUIRK_HAS_SHARED_IRQ
is enabled for pinctrl domain.

As result, following 'possible irq lock inversion dependency' report
can be seen:
=========================================================
[ INFO: possible irq lock inversion dependency detected ]
3.14.43-rt42-00360-g96ff499-dirty #24 Not tainted
---------------------------------------------------------
irq/369-pinctrl/927 just changed the state of lock:
 (&pcs->lock){+.....}, at: [<c0375b54>] pcs_irq_handle+0x48/0x9c
but this lock was taken by another, HARDIRQ-safe lock in the past:
 (&irq_desc_lock_class){-.....}

and interrupts could create inverse lock ordering between them.

other info that might help us debug this:
 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&pcs->lock);
                               local_irq_disable();
                               lock(&irq_desc_lock_class);
                               lock(&pcs->lock);
  <Interrupt>
    lock(&irq_desc_lock_class);

 *** DEADLOCK ***

no locks held by irq/369-pinctrl/927.

the shortest dependencies between 2nd lock and 1st lock:
  -> (&irq_desc_lock_class){-.....} ops: 58724 {
     IN-HARDIRQ-W at:
                       [<c0090040>] lock_acquire+0x9c/0x158
                       [<c07065c8>] _raw_spin_lock+0x48/0x58
                       [<c009edac>] handle_fasteoi_irq+0x24/0x15c
                       [<c009abb0>] generic_handle_irq+0x3c/0x4c
                       [<c000f83c>] handle_IRQ+0x50/0xa0
                       [<c0008674>] gic_handle_irq+0x3c/0x6c
                       [<c0707a04>] __irq_svc+0x44/0x8c
                       [<c000fc44>] arch_cpu_idle+0x40/0x4c
                       [<c009aadc>] cpu_startup_entry+0x270/0x2e0
                       [<c06fcbf8>] rest_init+0xd4/0xe4
                       [<c0a44bfc>] start_kernel+0x3d0/0x3dc
                       [<80008084>] 0x80008084
     INITIAL USE at:
                      [<c0090040>] lock_acquire+0x9c/0x158
                      [<c070674c>] _raw_spin_lock_irqsave+0x54/0x68
                      [<c009aff8>] __irq_get_desc_lock+0x64/0xa4
                      [<c009e38c>] irq_set_chip+0x30/0x78
                      [<c009ec30>] irq_set_chip_and_handler_name+0x24/0x3c
                      [<c036ca10>] gic_irq_domain_map+0x48/0xb4
                      [<c00a0a80>] irq_domain_associate+0x84/0x1d4
                      [<c00a1154>] irq_create_mapping+0x80/0x11c
                      [<c00a1270>] irq_create_of_mapping+0x80/0x120
                      [<c05cdaa8>] irq_of_parse_and_map+0x34/0x3c
                      [<c0a4ea24>] omap_dm_timer_init_one+0x90/0x30c
                      [<c0a4eef0>] omap5_realtime_timer_init+0x8c/0x48c
                      [<c0a486b0>] time_init+0x28/0x38
                      [<c0a44a6c>] start_kernel+0x240/0x3dc
                      [<80008084>] 0x80008084
   }
   ... key      at: [<c1049ce0>] irq_desc_lock_class+0x0/0x8
   ... acquired at:
   [<c07065c8>] _raw_spin_lock+0x48/0x58
   [<c0375a90>] pcs_irq_unmask+0x58/0xa0
   [<c009ea48>] irq_enable+0x38/0x48
   [<c009ead0>] irq_startup+0x78/0x7c
   [<c009d440>] __setup_irq+0x4a8/0x4f4
   [<c009d5dc>] request_threaded_irq+0xb8/0x138
   [<c0415a5c>] omap_8250_startup+0x4c/0x148
   [<c041276c>] serial8250_startup+0x24/0x30
   [<c040d0ec>] uart_startup.part.9+0x5c/0x1b4
   [<c040dbcc>] uart_open+0xf4/0x16c
   [<c03f0540>] tty_open+0x170/0x61c
   [<c0157028>] chrdev_open+0xbc/0x1b4
   [<c0150494>] do_dentry_open+0x1e8/0x2bc
   [<c0150a84>] finish_open+0x44/0x5c
   [<c0160d50>] do_last.isra.47+0x710/0xca0
   [<c01613a4>] path_openat+0xc4/0x640
   [<c0162904>] do_filp_open+0x3c/0x98
   [<c0151bdc>] do_sys_open+0x114/0x1d8
   [<c0151cc8>] SyS_open+0x28/0x2c
   [<c0a44d70>] kernel_init_freeable+0x168/0x1e4
   [<c06fcc24>] kernel_init+0x1c/0xf8
   [<c000eee8>] ret_from_fork+0x14/0x20

-> (&pcs->lock){+.....} ops: 65 {
   HARDIRQ-ON-W at:
                    [<c0090040>] lock_acquire+0x9c/0x158
                    [<c07065c8>] _raw_spin_lock+0x48/0x58
                    [<c0375b54>] pcs_irq_handle+0x48/0x9c
                    [<c0375c5c>] pcs_irq_handler+0x1c/0x28
                    [<c009c458>] irq_forced_thread_fn+0x30/0x74
                    [<c009c784>] irq_thread+0x158/0x1c4
                    [<c0063fc4>] kthread+0xd4/0xe8
                    [<c000eee8>] ret_from_fork+0x14/0x20
   INITIAL USE at:
                   [<c0090040>] lock_acquire+0x9c/0x158
                   [<c070674c>] _raw_spin_lock_irqsave+0x54/0x68
                   [<c0375344>] pcs_enable+0x7c/0xe8
                   [<c0372a44>] pinmux_enable_setting+0x178/0x220
                   [<c036fecc>] pinctrl_select_state+0x110/0x194
                   [<c04732dc>] pinctrl_bind_pins+0x7c/0x108
                   [<c045853c>] driver_probe_device+0x70/0x254
                   [<c0458810>] __driver_attach+0x9c/0xa0
                   [<c045674c>] bus_for_each_dev+0x78/0xac
                   [<c0458030>] driver_attach+0x2c/0x30
                   [<c0457c78>] bus_add_driver+0x15c/0x204
                   [<c0458ee0>] driver_register+0x88/0x108
                   [<c045a168>] __platform_driver_register+0x64/0x6c
                   [<c0a8170c>] omap_hsmmc_driver_init+0x1c/0x20
                   [<c0008a94>] do_one_initcall+0x110/0x170
                   [<c0a44d48>] kernel_init_freeable+0x140/0x1e4
                   [<c06fcc24>] kernel_init+0x1c/0xf8
                   [<c000eee8>] ret_from_fork+0x14/0x20
 }
 ... key      at: [<c1088a8c>] __key.18572+0x0/0x8
 ... acquired at:
   [<c008cdd4>] mark_lock+0x388/0x76c
   [<c008df40>] __lock_acquire+0x6d0/0x1f98
   [<c0090040>] lock_acquire+0x9c/0x158
   [<c07065c8>] _raw_spin_lock+0x48/0x58
   [<c0375b54>] pcs_irq_handle+0x48/0x9c
   [<c0375c5c>] pcs_irq_handler+0x1c/0x28
   [<c009c458>] irq_forced_thread_fn+0x30/0x74
   [<c009c784>] irq_thread+0x158/0x1c4
   [<c0063fc4>] kthread+0xd4/0xe8
   [<c000eee8>] ret_from_fork+0x14/0x20

stack backtrace:
CPU: 1 PID: 927 Comm: irq/369-pinctrl Not tainted 3.14.43-rt42-00360-g96ff499-dirty #24
[<c00177e0>] (unwind_backtrace) from [<c00130b0>] (show_stack+0x20/0x24)
[<c00130b0>] (show_stack) from [<c0702958>] (dump_stack+0x84/0xd0)
[<c0702958>] (dump_stack) from [<c008bcfc>] (print_irq_inversion_bug+0x1d0/0x21c)
[<c008bcfc>] (print_irq_inversion_bug) from [<c008bf18>] (check_usage_backwards+0xb4/0x11c)
[<c008bf18>] (check_usage_backwards) from [<c008cdd4>] (mark_lock+0x388/0x76c)
[<c008cdd4>] (mark_lock) from [<c008df40>] (__lock_acquire+0x6d0/0x1f98)
[<c008df40>] (__lock_acquire) from [<c0090040>] (lock_acquire+0x9c/0x158)
[<c0090040>] (lock_acquire) from [<c07065c8>] (_raw_spin_lock+0x48/0x58)
[<c07065c8>] (_raw_spin_lock) from [<c0375b54>] (pcs_irq_handle+0x48/0x9c)
[<c0375b54>] (pcs_irq_handle) from [<c0375c5c>] (pcs_irq_handler+0x1c/0x28)
[<c0375c5c>] (pcs_irq_handler) from [<c009c458>] (irq_forced_thread_fn+0x30/0x74)
[<c009c458>] (irq_forced_thread_fn) from [<c009c784>] (irq_thread+0x158/0x1c4)
[<c009c784>] (irq_thread) from [<c0063fc4>] (kthread+0xd4/0xe8)
[<c0063fc4>] (kthread) from [<c000eee8>] (ret_from_fork+0x14/0x20)

To fix it use IRQF_NO_THREAD to ensure that pcs irq will not be forced threaded.

Cc: Tony Lindgren <tony@atomide.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The PFC driver causes the kernel to hang on the R-Car gen2 SoC based  boards
when the CPU_ALL_PORT() macro is fixed to reflect the reality, i.e. when the
GPIO space becomes actually sparse.  This happens because the _GP_GPIO() macro
includes  an indexed initializer which causes the "holes" (array entries filled
with all 0s) between the groups  of the existing GPIOs; and the driver can't
cope with that.  There seems to  be no reason to use the indexed initializer,
so we can remove the index specifier and so avoid the "holes".

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Commit a21763a0


"pinctrl: nomadik: activate strict mux mode"
put all Nomadik pin controllers to strict mode. This was
not good on the Snowball platform: the muxing of GPIOs to
different pins is done with hogs in the DTS file, and then
these GPIOs are used by offset, relying on hogs to mux the
pins. Since that means the pin controller "owns" the pins
and at the same time we have a GPIO user, this pin controller
is by definition not strict.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Pull SCSI fixes from James Bottomley:
 "Two fairly simple fixes: one is a change that causes us to have a very
  low queue depth leading to performance issues and the other is a null
  deref occasionally in tapes thanks to use after put"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: fix host max depth checking for the 'queue_depth' sysfs interface
  st: null pointer dereference panic caused by use after kref_put by st_open

Pull MIPS fixes from Ralf Baechle:
 "Another round of MIPS fixes for 4.2.

  Things are looking quite decent at this stage but the recent work on
  the FPU support took its toll:

   - fix an incorrect overly restrictive ifdef

   - select O32 64-bit FP support for O32 binary compatibility

   - remove workarounds for Sibyte SB1250 Pass1 parts.  There are rare
     fixing the workarounds is not worth the effort.

   - patch up an outdated and now incorrect comment"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: fpu.h: Allow 64-bit FPU on a 64-bit MIPS R6 CPU
  MIPS: SB1: Remove support for Pass 1 parts.
  MIPS: Require O32 FP64 support for MIPS64 with O32 compat
  MIPS: asm-offset.c: Patch up various comments refering to the old filename.

Pull parisc fix from Helge Deller:
 "A memory leak fix from Christophe Jaillet which was introduced with
  kernel 4.0 and which leads to kernel crashes on parisc after 1-3 days"

* 'parisc-4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: mm: Fix a memory leak related to pmd not attached to the pgd

Pull ARM SoC fixes from Olof Johansson:
 "By far most of the fixes here are updates to DTS files to deal with
  some mostly minor bugs.

  There's also a fix to deal with non-PM kernel configs on i.MX, a
  regression fix for ethernet on PXA platforms and a dependency fix for
  OMAP"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: keystone: dts: rename pcie nodes to help override status
  ARM: keystone: dts: fix dt bindings for PCIe
  ARM: pxa: fix dm9000 platform data regression
  ARM: dts: Correct audio input route & set mic bias for am335x-pepper
  ARM: OMAP2+: Add HAVE_ARM_SCU for AM43XX
  MAINTAINERS: digicolor: add dts files
  ARM: ux500: fix MMC/SD card regression
  ARM: ux500: define serial port aliases
  ARM: dts: OMAP5: Add #iommu-cells property to IOMMUs
  ARM: dts: OMAP4: Add #iommu-cells property to IOMMUs
  ARM: dts: Fix frequency scaling on Gumstix Pepper
  ARM: dts: configure regulators for Gumstix Pepper
  ARM: dts: omap3: overo: Update LCD panel names
  ARM: dts: cros-ec-keyboard: Add support for some Japanese keys
  ARM: imx6: gpc: always enable PU domain if CONFIG_PM is not set
  ARM: dts: imx53-qsb: fix TVE entry
  ARM: dts: mx23: fix iio-hwmon support
  ARM: dts: imx27: Adjust the GPT compatible string
  ARM: socfpga: dts: Fix entries order
  ARM: socfpga: dts: Fix adxl34x formating and compatible string

Commit 6134d949

 ("MIPS: asm: fpu: Allow 64-bit FPU on MIPS32 R6")
added support for 64-bit FPU on a 32-bit MIPS R6 processor but it missed
the 64-bit CPU case leading to FPU failures when requesting FR=1 mode
(which is always the case for MIPS R6 userland) when running a 32-bit
kernel on a 64-bit CPU. We also fix the MIPS R2 case.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Fixes: 6134d949

 ("MIPS: asm: fpu: Allow 64-bit FPU on MIPS32 R6")
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: <stable@vger.kernel.org> # 4.0+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10734/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Commit 0e0da48d

 ("parisc: mm: don't count preallocated pmds")
introduced a memory leak.

After this commit, the 'return' statement in pmd_free is executed in all
cases. Even for pmd that are not attached to the pgd.  So 'free_pages'
can never be called anymore, leading to a memory leak.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org  # v4.0+
Signed-off-by: Helge Deller <deller@gmx.de>

Merge "pxa fixes for v4.2" from Robert Jarzmik:

ARM: pxa: fixes for v4.2-rc2

This single fix reenables ethernet cards for several pxa boards,
broken by regulator addition to dm9000 driver.

* tag 'pxa-fixes-v4.2-rc2' of https://github.com/rjarzmik/linux:
  ARM: pxa: fix dm9000 platform data regression

Pull ARM fixes from Russell King:
 "A small set of ARM fixes for -rc3, most of them not far off
  one-liners, with the exception of fixing the V7 cache invalidation for
  incoming SMP processors which was causing problems for SoCFPGA
  devices"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: fix __virt_to_idmap build error on !MMU
  ARM: invalidate L1 before enabling coherency
  ARM: 8404/1: dma-mapping: fix off-by-one error in bitmap size check
  ARM: 8402/1: perf: Don't use of_node after putting it
  ARM: 8400/1: use virt_to_idmap to get phys_reset address

Pull x86 fixes from Ingo Molnar:
 "Two families of fixes:

   - Fix an FPU context related boot crash on newer x86 hardware with
     larger context sizes than what most people test.  To fix this
     without ugly kludges or extensive reverts we had to touch core task
     allocator, to allow x86 to determine the task size dynamically, at
     boot time.

     I've tested it on a number of x86 platforms, and I cross-built it
     to a handful of architectures:

                                        (warns)               (warns)
       testing     x86-64:  -git:  pass (    0),  -tip:  pass (    0)
       testing     x86-32:  -git:  pass (    0),  -tip:  pass (    0)
       testing        arm:  -git:  pass ( 1359),  -tip:  pass ( 1359)
       testing       cris:  -git:  pass ( 1031),  -tip:  pass ( 1031)
       testing       m32r:  -git:  pass ( 1135),  -tip:  pass ( 1135)
       testing       m68k:  -git:  pass ( 1471),  -tip:  pass ( 1471)
       testing       mips:  -git:  pass ( 1162),  -tip:  pass ( 1162)
       testing    mn10300:  -git:  pass ( 1058),  -tip:  pass ( 1058)
       testing     parisc:  -git:  pass ( 1846),  -tip:  pass ( 1846)
       testing      sparc:  -git:  pass ( 1185),  -tip:  pass ( 1185)

     ... so I hope the cross-arch impact 'none', as intended.

     (by Dave Hansen)

   - Fix various NMI handling related bugs unearthed by the big asm code
     rewrite and generally make the NMI code more robust and more
     maintainable while at it.  These changes are a bit late in the
     cycle, I hope they are still acceptable.

     (by Andy Lutomirski)"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu, sched: Introduce CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT and use it on x86
  x86/fpu, sched: Dynamically allocate 'struct fpu'
  x86/entry/64, x86/nmi/64: Add CONFIG_DEBUG_ENTRY NMI testing code
  x86/nmi/64: Make the "NMI executing" variable more consistent
  x86/nmi/64: Minor asm simplification
  x86/nmi/64: Use DF to avoid userspace RSP confusing nested NMI detection
  x86/nmi/64: Reorder nested NMI checks
  x86/nmi/64: Improve nested NMI comments
  x86/nmi/64: Switch stacks on userspace NMI entry
  x86/nmi/64: Remove asm code that saves CR2
  x86/nmi: Enable nested do_nmi() handling for 64-bit kernels

Pull timer fix from Ingo Molnar:
 "Fix for a misplaced export that can cause build failures in certain
  (rare) Kconfig situations"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick: Move the export of tick_broadcast_oneshot_control to the proper place

Pull scheduler fix from Ingo Molnar:
 "A oneliner rq throttling fix"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Test list head instead of list entry in throttle_cfs_rq()

Pull perf fixes from Ingo Molnar:
 "Mostly tooling fixes, plus a static key fix fixing /sys/devices/cpu/rdpmc"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf tools: Really allow to specify custom CC, AR or LD
  perf auxtrace: Fix misplaced check for HAVE_SYNC_COMPARE_AND_SWAP_SUPPORT
  perf hists browser: Take the --comm, --dsos, etc filters into account
  perf symbols: Store if there is a filter in place
  x86, perf: Fix static_key bug in load_mm_cr4()
  tools: Copy lib/hweight.c from the kernel sources
  perf tools: Fix the detached tarball wrt rbtree copy
  perf thread_map: Fix the sizeof() calculation for map entries
  tools lib: Improve clean target
  perf stat: Fix shadow declaration of close
  perf tools: Fix lockup using 32-bit compat vdso

Pull irq fixes from Ingo Molnar:
 "Misc irq fixes:

   - two driver fixes
   - a Xen regression fix
   - a nested irq thread crash fix"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gicv3-its: Fix mapping of LPIs to collections
  genirq: Prevent resend to interrupts marked IRQ_NESTED_THREAD
  genirq: Revert sparse irq locking around __cpu_up() and move it to x86 for now
  gpio/davinci: Fix race in installing chained irq handler

Merge fixes from Andrew Morton:
 "25 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (25 commits)
  lib/decompress: set the compressor name to NULL on error
  mm/cma_debug: correct size input to bitmap function
  mm/cma_debug: fix debugging alloc/free interface
  mm/page_owner: set correct gfp_mask on page_owner
  mm/page_owner: fix possible access violation
  fsnotify: fix oops in fsnotify_clear_marks_by_group_flags()
  /proc/$PID/cmdline: fixup empty ARGV case
  dma-debug: skip debug_dma_assert_idle() when disabled
  hexdump: fix for non-aligned buffers
  checkpatch: fix long line messages about patch context
  mm: clean up per architecture MM hook header files
  MAINTAINERS: uclinux-h8-devel is moderated for non-subscribers
  mailmap: update Sudeep Holla's email id
  Update Viresh Kumar's email address
  mm, meminit: suppress unused memory variable warning
  configfs: fix kernel infoleak through user-controlled format string
  include, lib: add __printf attributes to several function prototypes
  s390/hugetlb: add hugepages_supported define
  mm: hugetlb: allow hugepages_supported to be architecture specific
  revert "s390/mm: make hugepages_supported a boot time decision"
  ...

Pull btrfs fixes from Chris Mason:
 "These are all from Filipe, and cover a few problems we've had reported
  on the list recently (along with ones he found on his own)"

* 'for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix file corruption after cloning inline extents
  Btrfs: fix order by which delayed references are run
  Btrfs: fix list transaction->pending_ordered corruption
  Btrfs: fix memory leak in the extent_same ioctl
  Btrfs: fix shrinking truncate when the no_holes feature is enabled

Pull rtc fixes from Alexandre Belloni:
 "A few fixes for the RTC susbsystem for 4.2.

  The mt6397 driver was introduce in 4.2 so it is worth fixing before
  the final release.  I though the compilation warning for armada38x was
  fixed by akpm in commit f98b733e ("rtc-armada38x.c: remove unused
  local `flags'") but he actually missed some occurrences of the
  variables.  Since I received 4 patches for that, I think we can
  include it now.

  Summary:
   - fix mt6397 wakealarm creation
   - remove a compilation warning for armada38x that was forgotten"

* tag 'rtc-v4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  rtc: armada38x: Remove unused variable from armada38x_rtc_set_time()
  rtc: mt6397: enable wakeup before registering rtc device

Pull device mapper fixes from Mike Snitzer:

 - revert a request-based DM core change that caused IO latency to
   increase and adversely impact both throughput and system load

 - fix for a use after free bug in DM core's device cleanup

 - a couple DM btree removal fixes (used by dm-thinp)

 - a DM thinp fix for order-5 allocation failure

 - a DM thinp fix to not degrade to read-only metadata mode when in
   out-of-data-space mode for longer than the 'no_space_timeout'

 - fix a long-standing oversight in both dm-thinp and dm-cache by now
   exporting 'needs_check' in status if it was set in metadata

 - fix an embarrassing dm-cache busy-loop that caused worker threads to
   eat cpu even if no IO was actively being issued to the cache device

* tag 'dm-4.2-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm cache: avoid calls to prealloc_free_structs() if possible
  dm cache: avoid preallocation if no work in writeback_some_dirty_blocks()
  dm cache: do not wake_worker() in free_migration()
  dm cache: display 'needs_check' in status if it is set
  dm thin: display 'needs_check' in status if it is set
  dm thin: stay in out-of-data-space mode once no_space_timeout expires
  dm: fix use after free crash due to incorrect cleanup sequence
  Revert "dm: only run the queue on completion if congested or no requests pending"
  dm btree: silence lockdep lock inversion in dm_btree_del()
  dm thin: allocate the cell_sort_array dynamically
  dm btree remove: fix bug in redistribute3

Don't burden architectures without dynamic task_struct sizing
with the overhead of dynamic sizing.

Also optimize the x86 code a bit by caching task_struct_size.

Acked-and-Tested-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1437128892-9831-3-git-send-email-mingo@kernel.org


Signed-off-by: Ingo Molnar <mingo@kernel.org>

The FPU rewrite removed the dynamic allocations of 'struct fpu'.
But, this potentially wastes massive amounts of memory (2k per
task on systems that do not have AVX-512 for instance).

Instead of having a separate slab, this patch just appends the
space that we need to the 'task_struct' which we dynamically
allocate already.  This saves from doing an extra slab
allocation at fork().

The only real downside here is that we have to stick everything
and the end of the task_struct.  But, I think the
BUILD_BUG_ON()s I stuck in there should keep that from being too
fragile.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1437128892-9831-2-git-send-email-mingo@kernel.org


Signed-off-by: Ingo Molnar <mingo@kernel.org>

Without this we end up using the previous name of the compressor in the
loop in unpack_rootfs.  For example we get errors like "compression
method gzip not configured" even when we have CONFIG_DECOMPRESS_GZIP
enabled.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In CMA, 1 bit in bitmap means 1 << order_per_bits pages so size of
bitmap is cma->count >> order_per_bits rather than just cma->count.
This patch fixes it.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Stefan Strogin <stefan.strogin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>