- May 28, 2009
-
-
Zhaolei authored
"call" is an argument of macro, but it is also used as a local variable name of function in macro. We should keep this local variable name distinct from any CPP macro parameter name if both are in the same macro scope, although it hasn't caused any problem yet. [ Impact: robustify macro ] Signed-off-by:
Zhao Lei <zhaolei@cn.fujitsu.com> Acked-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com>
-
Heiko Carstens authored
s390 code uses smp_processor_id() in __raw_spin_lock() code which reveals that a (raw) spinlock is taken without preemption disabled. This can potentially deadlock. To fix this explicitly disable and enable preemption. BUG: using smp_processor_id() in preemptible [00000000] code: cat/2278 caller is trace_find_cmdline+0x40/0xfc CPU: 0 Not tainted 2.6.30-rc7-dirty #39 Process cat (pid: 2278, task: 000000003faedb68, ksp: 000000003b33b988) 000000003b33b988 000000003b33bae0 0000000000000002 0000000000000000 000000003b33bb80 000000003b33baf8 000000003b33baf8 00000000000175d6 0000000000000001 000000003b33b988 000000003f9b0000 000000000000000b 000000000000000c 000000003b33bb40 000000003b33bae0 0000000000000000 0000000000000000 00000000000175d6 000000003b33bae0 000000003b33bb28 Call Trace: ([<00000000000174b2>] show_trace+0x112/0x170) [<0000000000017582>] show_stack+0x72/0x100 [<0000000000441538>] dump_stack+0xc8/0xd8 [<000000000025c350>] debug_smp_processor_id+0x114/0x130 [<00000000000bf0e4>] trace_find_cmdline+0x40/0xfc [<00000000000c35d4>] trace_print_context+0x58/0xac [<00000000000bb676>] print_trace_line+0x416/0x470 [<00000000000bc8fe>] s_show+0x4e/0x428 [<000000000013834e>] seq_read+0x36a/0x5d4 [<0000000000112a78>] vfs_read+0xc8/0x174 [<0000000000112c58>] SyS_read+0x74/0xc4 [<000000000002c7ae>] sysc_noemu+0x10/0x16 [<000002000012436c>] 0x2000012436c 1 lock held by cat/2278: #0: (&p->lock){+.+.+.}, at: [<0000000000138056>] seq_read+0x72/0x5d4 [ Impact: fix preempt-unsafe raw spinlock ] Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com>
-
- May 27, 2009
-
-
Steven Rostedt authored
The recording of the names at trace time is inefficient. This patch implements the softirq event recording to only record the vector and then use the __print_symbolic interface to print out the names. [ Impact: faster recording of softirq events ] Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com>
-
Steven Rostedt authored
This patch adds __print_symbolic which is similar to __print_flags but works for an enumeration type instead. That is, there is only a one to one mapping between the values and the symbols. When a match is made, then it is printed, otherwise the hex value is outputed. [ Impact: add interface for showing symbol names in events ] Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com>
-
Steven Rostedt authored
This patch changes the output for gfp_flags from being a simple hex value to the actual names. gfp_flags=GFP_ATOMIC instead of gfp_flags=00000020 And even gfp_flags=GFP_KERNEL instead of gfp_flags=000000d0 (Thanks to Frederic Weisbecker for pointing out that the first version had a bad order of GFP masks) [ Impact: more human readable output from tracer ] Acked-by:
Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com>
-
Steven Rostedt authored
It is useful to see the state of a task that is being switched out. This patch adds the output of the state of the previous task in the context switch event. [ Impact: see state of switched out task in context switch ] Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com>
-
Steven Rostedt authored
Developers have been asking for the ability in the ftrace event tracer to display names of bits in a flags variable. Instead of printing out c2, it would be easier to read FOO|BAR|GOO, assuming that FOO is bit 1, BAR is bit 6 and GOO is bit 7. Some examples where this would be useful are the state flags in a context switch, kmalloc flags, and even permision flags in accessing files. [ v2 changes include: Frederic Weisbecker's idea of using a mask instead of bits, thus we can output GFP_KERNEL instead of GPF_WAIT|GFP_IO|GFP_FS. Li Zefan's idea of allowing the caller of __print_flags to add their own delimiter (or no delimiter) where we can get for file permissions rwx instead of r|w|x. ] [ v3 changes: Christoph Hellwig's idea of using an array instead of va_args. ] [ Impact: better displaying of flags in trace output ] Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com>
-
- May 26, 2009
-
-
Zhaolei authored
Always use ftrace_event_enable_disable() to enable/disable an event so that we can factorize out the event toggling code. [ Impact: factorize and cleanup event tracing code ] Signed-off-by:
Zhao Lei <zhaolei@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <4A14FDFE.2080402@cn.fujitsu.com> Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com>
-
Zhaolei authored
If we enable a trace event alone without any tracer running (such as function tracer, sched switch tracer, etc...) it can't output enough task command information. We need to use the tracing_{start/stop}_cmdline_record() helpers which are designed to keep track of cmdlines for any tasks that were scheduled during the tracing. Before this patch: # echo 1 > debugfs/tracing/events/sched/sched_switch/enable # cat debugfs/tracing/trace # tracer: nop # # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | <...>-2289 [000] 526276.724790: sched_switch: task bash:2289 [120] ==> sshd:2287 [120] <...>-2287 [000] 526276.725231: sched_switch: task sshd:2287 [120] ==> bash:2289 [120] <...>-2289 [000] 526276.725452: sched_switch: task bash:2289 [120] ==> sshd:2287 [120] <...>-2287 [000] 526276.727181: sched_switch: task sshd:2287 [120] ==> swapper:0 [140] <idle>-0 [000] 526277.032734: sched_switch: task swapper:0 [140] ==> events/0:5 [115] <...>-5 [000] 526277.032782: sched_switch: task events/0:5 [115] ==> swapper:0 [140] ... After this patch: # tracer: nop # # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | bash-2269 [000] 527347.989229: sched_switch: task bash:2269 [120] ==> sshd:2267 [120] sshd-2267 [000] 527347.990960: sched_switch: task sshd:2267 [120] ==> bash:2269 [120] bash-2269 [000] 527347.991143: sched_switch: task bash:2269 [120] ==> sshd:2267 [120] sshd-2267 [000] 527347.992959: sched_switch: task sshd:2267 [120] ==> swapper:0 [140] <idle>-0 [000] 527348.531989: sched_switch: task swapper:0 [140] ==> events/0:5 [115] events/0-5 [000] 527348.532115: sched_switch: task events/0:5 [115] ==> swapper:0 [140] ... Changelog: v1->v2: Update Kconfig to select CONTEXT_SWITCH_TRACER in ENABLE_EVENT_TRACING v2->v3: v2 can solve problem that was caused by config EVENT_TRACING alone, but when CONFIG_FTRACE is off and CONFIG_TRACING is selected by other config, compile fail happened again. This version solves it. [ Impact: fix incomplete output of event tracing ] Signed-off-by:
Zhao Lei <zhaolei@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <4A14FDFE.2080402@cn.fujitsu.com> Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com>
-
Pekka Enberg authored
The kmemtrace.enable kernel parameter no longer works. To enable kmemtrace at boot-time, you must pass "ftrace=kmemtrace" instead. [ Impact: remove obsolete kernel parameter documentation ] Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> LKML-Reference: <alpine.DEB.2.00.0905241112190.10296@rocky> Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com>
-
Li Zefan authored
When defining a dynamic size string, we add __str_loc_##item to the trace entry, and it stores the location of the actual string in entry->_str_data[] 'unsigned short' should be sufficient to store this information, thus we save 2 bytes per dyn-size string in the ring buffer. [ Impact: reduce memory occupied by dyn-size strings in ring buffer ] Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <4A14EDB6.2050507@cn.fujitsu.com> Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com>
-
Lai Jiangshan authored
I found that there is nothing to protect event_hash in ftrace_find_event(). Rcu protects the event hashlist but not the event itself while we use it after its extraction through ftrace_find_event(). This lack of a proper locking in this spot opens a race window between any event dereferencing and module removal. Eg: --Task A-- print_trace_line(trace) { event = find_ftrace_event(trace) --Task B-- trace_module_remove_events(mod) { list_trace_events_module(ev, mod) { unregister_ftrace_event(ev->event) { hlist_del(ev->event->node) list_del(....) } } } |--> module removed, the event has been dropped --Task A-- event->print(trace); // Dereferencing freed memory If the event retrieved belongs to a module and this module is concurrently removed, we may end up dereferencing a data from a freed module. RCU could solve this, but it would add latency to the kernel and forbid tracers output callbacks to call any sleepable code. So this fix converts 'trace_event_mutex' to a read/write semaphore, and adds trace_event_read_lock() to protect ftrace_find_event(). [ Impact: fix possible freed memory dereference in ftrace ] Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by:
Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <4A114806.7090302@cn.fujitsu.com> Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com>
-
- May 21, 2009
-
-
Ming Lei authored
register_module_notifier() returns zero in the success case. So fix the inverted fail case check in trace events modules handler. [ Impact: fix spurious warning on ftrace initialization] Reported-by:
Li Zefan <lizf@cn.fujitsu.com> Signed-off-by:
Ming Lei <tom.leiming@gmail.com> Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com>
-
- May 19, 2009
-
-
Stefan Raspl authored
debugfs directory entries for devices are not removed on some of the failure pathes in do_blk_trace_setup(). One way to reproduce is to start blktrace on multiple devices with insufficient Vmalloc space: Devices will fail with a message like this: BLKTRACESETUP(2) /dev/sdu failed: 5/Input/output error If so, the respective entries in debugfs (e.g. /sys/kernel/debug/block/sdu) will remain and subsequent attempts to start blktrace on the respective devices will not succeed due to existing directories. [ Impact: fix /debug/tracing file cleanup corner case ] Signed-off-by:
Stefan Raspl <stefan.raspl@linux.vnet.ibm.com> Acked-by:
Li Zefan <lizf@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com LKML-Reference: <4A1266CC.5040801@linux.vnet.ibm.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Li Zefan authored
- fix some typos - document the difference between '>' and '>>' - document the 'enable' toggle - remove section "Defining an event-enabled tracepoint", since it's out-dated and sample/trace_events/ already serves this purpose. v2: add "Updated by Li Zefan" [ Impact: make documentation up-to-date ] Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: "Theodore Ts'o" <tytso@mit.edu> LKML-Reference: <4A125503.5060406@cn.fujitsu.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
- May 18, 2009
-
-
Ming Lei authored
return zero should be correct, so fix it. [ Impact: eliminate incorrect syslog message ] Signed-off-by:
Ming Lei <tom.leiming@gmail.com> Acked-by:
Frederic Weisbecker <fweisbec@gmail.com> Acked-by:
Li Zefan <lizf@cn.fujitsu.com> Cc: rostedt@goodmis.org LKML-Reference: <1242545498-7285-1-git-send-email-tom.leiming@gmail.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Ingo Molnar authored
Merge reason: we were on an -rc4 base, sync up to -rc6 Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
- May 16, 2009
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI MSI: Fix MSI-X with NIU cards PCI: Fix pci-e port driver slot_reset bad default return value
-
git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6: Bluetooth: Don't trigger disconnect timeout for security mode 3 pairing Bluetooth: Don't use hci_acl_connect_cancel() for incoming connections Bluetooth: Fix wrong module refcount when connection setup fails Another case of me handling the fallout from Davem's unfortunate addiction to shuffleboard. Won't anybody think of the children? Join the anti-shuffleboard league today!
-
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intelLinus Torvalds authored
* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: Add new GET_PIPE_FROM_CRTC_ID ioctl. drm/i915: Set HDMI hot plug interrupt enable for only the output in question. drm/i915: Include 965GME pci ID in IS_I965GM(dev) to match UMS. drm/i915: Use the GM45 VGA hotplug workaround on G45 as well. drm/i915: ignore LVDS on intel graphics systems that lie about having it drm/i915: sanity check IER at wait_request time drm/i915: workaround IGD i2c bus issue in kernel side (v2) drm/i915: Don't allow binding objects into the last page of the aperture. drm/i915: save/restore fence registers across suspend/resume drm/i915: x86 always has writeq. Add I915_READ64 for symmetry.
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
* 'upstream-linus' of ssh://master.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: Media rotation rate and form factor heuristics libata: Report disk alignment and physical block size sata_fsl: Fix the command description of FSL SATA controller sata_fsl: Fix compile warnings [libata] sata_sx4: fixup interrupt handling [libata] sata_sx4: convert to new exception handling methods
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6: iwlwifi: fix device id registration for 6000 series 2x2 devices ath5k: update channel in sw state after stopping RX and TX rtl8187: use DMA-aware buffers with usb_control_msg mac80211: avoid NULL ptr deref when finding max_rates in PID and minstrel airo: airo_get_encode{,ext} potential buffer overflow Pulled directly by Linus because Davem is off playing shuffle-board at some Alaskan cruise, and the NULL ptr deref issue hits people and should get merged sooner rather than later. David - make us proud on the shuffle-board tournament!
-
Martin K. Petersen authored
This patch provides new heuristics for parsing both the form factor and media rotation rate ATA IDENFITY words. The reported ATA version must be 7 or greater and the device must return values defined as valid in the standard. Only then are the characteristics reported to SCSI via the VPD B1 page. This seems like a reasonable compromise to me considering that we have been shipping several kernel releases that key off the rotation rate bit without any version checking whatsoever. With no complaints so far. Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com>
-
Martin K. Petersen authored
For disks with 4KB sectors, report the correct block size and alignment when filling out the READ CAPACITY(16) response. This patch is based upon code from Matthew Wilcox' 4KB ATA tree. I fixed the bug I reported a while back caused by ATA and SCSI using different approaches to describing the alignment. Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com>
-
Dave Liu authored
The bit 11 of command description is reserved bit in Freescale SATA controller and needs to be set to '1'. This is needed to make sure the last write from the controller to the buffer descriptor is seen before an interrupt is raised. Signed-off-by:
Dave Liu <daveliu@freescale.com> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com>
-
Kumar Gala authored
We we build with dma_addr_t as a 64-bit quantity we get: drivers/ata/sata_fsl.c: In function 'sata_fsl_fill_sg': drivers/ata/sata_fsl.c:340: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'dma_addr_t' Signed-off-by:
Kumar Gala <galak@kernel.crashing.org> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com>
-
David Milburn authored
Issuing ATA_CMD_SET_FEATURES (0xef) times out because pdc20621_interrupt ignores command completion since ATA_TFLAG_POLLING flag is set. This has already been fixed for sata_promise: commit 51b94d2a Author: Tejun Heo <htejun@gmail.com> Date: Fri Jun 8 13:46:55 2007 -0700 sata_promise: use TF interface for polling NODATA commands Also, this patch includes Mikael's original patches: http://marc.info/?l=linux-ide&m=121135828227724&w=2 http://marc.info/?l=linux-ide&m=121144512109826&w=2 Signed-off-by:
Mikael Pettersson <mikpe@it.uu.se> Signed-off-by:
David Milburn <dmilburn@redhat.com> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com>
-
Jeff Garzik authored
Signed-off-by:
Jeff Garzik <jgarzik@redhat.com>
-
- May 15, 2009
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: Fix race in ext4_inode_info.i_cached_extent ext4: Clear the unwritten buffer_head flag after the extent is initialized ext4: Use a fake block number for delayed new buffer_head ext4: Fix sub-block zeroing for writes into preallocated extents
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ASoC: DaVinci EVM board support buildfixes ASoC: DaVinci I2S updates ASoC: davinci-pcm buildfixes ALSA: pcsp: fix printk format warning ALSA: riptide: postfix increment and off by one pxa2xx-ac97: fix reset gpio mode setting ASoC: soc-core: fix crash when removing not instantiated card
-
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdbLinus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kgdb: gdb documentation fix kgdb,i386: use address that SP register points to in the exception frame sysrq, intel_fb: fix sysrq g collision
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: Revert "mm: add /proc controls for pdflush threads" viocd: needs to depend on BLOCK block: fix the bio_vec array index out-of-bounds test
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Fix PCI ROM access powerpc/pseries: Really fix the oprofile CPU type on pseries serial/nwpserial: Fix wrong register read address and add interrupt acknowledge. powerpc/cell: Make ptcal more reliable powerpc: Allow mem=x cmdline to work with 4G+ powerpc/mpic: Fix incorrect allocation of interrupt rev-map powerpc: Fix oprofile sampling of marked events on POWER7 powerpc/iseries: Fix pci breakage due to bad dma_data initialization powerpc: Fix mktree build error on Mac OS X host powerpc/virtex: Fix duplicate level irq events. powerpc/virtex: Add uImage to the default images list powerpc/boot: add simpleImage.* to clean-files list powerpc/8xx: Update defconfigs powerpc/embedded6xx: Update defconfigs powerpc/86xx: Update defconfigs powerpc/85xx: Update defconfigs powerpc/83xx: Update defconfigs powerpc/fsl_soc: Remove mpc83xx_wdt_init, again
-
Sukadev Bhattiprolu authored
devpts_get_sb() calls memset(0) to clear mount options and calls parse_mount_options() if user specified any mount options. The memset(0) is bogus since the 'mode' and 'ptmxmode' options are non-zero by default. parse_mount_options() restores options to default anyway and can properly deal with NULL mount options. So in devpts_get_sb() remove memset(0) and call parse_mount_options() even for NULL mount options. Bug reported by Eric Paris: http://lkml.org/lkml/2009/5/7/448. Signed-off-by:
Sukadev Bhattiprolu <sukadev@us.ibm.com> Tested-by:
Marc Dionne <marc.c.dionne@gmail.com> Reported-by:
Eric Paris <eparis@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by:
Serge Hallyn <serue@us.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Reviewed-by:
"H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Takashi Iwai authored
* fix/asoc: ASoC: DaVinci EVM board support buildfixes ASoC: DaVinci I2S updates ASoC: davinci-pcm buildfixes pxa2xx-ac97: fix reset gpio mode setting ASoC: soc-core: fix crash when removing not instantiated card
-
Takashi Iwai authored
* fix/misc: ALSA: pcsp: fix printk format warning ALSA: riptide: postfix increment and off by one
-
Theodore Ts'o authored
If two CPU's simultaneously call ext4_ext_get_blocks() at the same time, there is nothing protecting the i_cached_extent structure from being used and updated at the same time. This could potentially cause the wrong location on disk to be read or written to, including potentially causing the corruption of the block group descriptors and/or inode table. This bug has been in the ext4 code since almost the very beginning of ext4's development. Fortunately once the data is stored in the page cache cache, ext4_get_blocks() doesn't need to be called, so trying to replicate this problem to the point where we could identify its root cause was *extremely* difficult. Many thanks to Kevin Shanahan for working over several months to be able to reproduce this easily so we could finally nail down the cause of the corruption. Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Reviewed-by:
"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
-
Frank Rowand authored
gdb command "set remote debug 1" is not valid, change to correct command. Signed-off-by:
Frank Rowand <frank.rowand@am.sony.com> Signed-off-by:
Jason Wessel <jason.wessel@windriver.com>
-
Jason Wessel authored
The treatment of the SP register is different on x86_64 and i386. This is a regression fix that lived outside the mainline kernel from 2.6.27 to now. The regression was a result of the original merge consolidation of the i386 and x86_64 archs to x86. The incorrectly reported SP on i386 prevented stack tracebacks from working correctly in gdb. Signed-off-by:
Jason Wessel <jason.wessel@windriver.com>
-