vmxnet3 device supports only power-of-two number of queues. The driver
therefore needs to check this and rounds down the number of queues to the
nearest power of two.

Signed-off-by: Yong Wang <yongwang@vmware.com>
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Reviewed-by: Dmitry Torokhov <dtor@vmware.com>

If the driver didn't set this parameter on the ETHER, the CPU will
encounter the "data address error" exception.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When link was down, the bit of DM in ECMR was always set.
So, we could not use half-duplex mode on the controller.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If gso/gro feature of underlying device is turned off，
then new created vlan device never can turn gso/gro on. 

Although underlying device don't support TSO, we still
should use software segments for vlan device.

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the rx ring is completely empty, then the device may never fire an rx
interrupt. Unfortunately, the rx interrupt is what triggers populating the
rx ring with fresh buffers, so this will cause networking to lock up.

This patch replenishes the skb in recv descriptor as soon as it is
peeled off while processing rx completions. If the skb/buffer
allocation fails, existing one is recycled and the packet in hand is
dropped. This way none of the RX desc is ever left empty, thus avoiding
starvation

Signed-off-by: Scott J. Goldman <scottjg@vmware.com>
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As is_multicast_ether_addr returns true on broadcast packets as
well, we need to explicitly exclude broadcast packets so that
they're always flooded.  This wasn't an issue before as broadcast
packets were considered to be an unregistered multicast group,
which were always flooded.  However, as we now only flood such
packets to router ports, this is no longer acceptable.

Reported-by: Michael Guntsche <mike@it-loops.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

The MAC address was set using the signed char sockaddr->sa_addr
field and thus the address could be corrupted through sign extension.

Signed-off-by: Kristoffer Glembo <kristoffer@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Hi,

Reinhard Max also pointed out that the error should EAFNOSUPPORT according
to POSIX.

The Linux manpages have it as EINVAL, some other OSes (Minix, HPUX, perhaps BSD) use
EAFNOSUPPORT. Windows uses WSAEFAULT according to MSDN.

Other protocols error values in their af bind() methods in current mainline git as far
as a brief look shows:
	EAFNOSUPPORT: atm, appletalk, l2tp, llc, phonet, rxrpc
	EINVAL: ax25, bluetooth, decnet, econet, ieee802154, iucv, netlink, netrom, packet, rds, rose, unix, x25,
	No check?: can/raw, ipv6/raw, irda, l2tp/l2tp_ip

Ciao, Marcus

Signed-off-by: Marcus Meissner <meissner@suse.de>
Cc: Reinhard Max <max@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

This silences dma-debug warnings:

https://lkml.org/lkml/2011/6/30/341

------------[ cut here ]------------
WARNING: at /home/jimc/projects/lx/linux-2.6/lib/dma-debug.c:820
check_unmap+0x1fe/0x56a()
natsemi 0000:00:06.0: DMA-API: device driver frees DMA memory with
different size [device address=0x0000000006ef0040] [map size=1538
bytes] [unmap size=1522 bytes]
Modules linked in: pc8736x_gpio pc87360 hwmon_vid scx200_gpio nsc_gpio
scx200_hrt scx200_acb i2c_core arc4 rtl8180 mac80211 eeprom_93cx6
cfg80211 pcspkr rfkill scx200 ide_gd_mod ide_pci_generic ohci_hcd
usbcore sc1200 ide_core
Pid: 870, comm: collector Not tainted 3.0.0-rc5-sk-00080-gca56a95 #1
Call Trace:
 [<c011a556>] warn_slowpath_common+0x4a/0x5f
 [<c02565cb>] ? check_unmap+0x1fe/0x56a
 [<c011a5cf>] warn_slowpath_fmt+0x26/0x2a
 [<c02565cb>] check_unmap+0x1fe/0x56a
 [<c0256aaa>] debug_dma_unmap_page+0x53/0x5b
 [<c029d6cd>] pci_unmap_single+0x4d/0x57
 [<c029ea0a>] natsemi_poll+0x343/0x5ca
 [<c0116f41>] ? try_to_wake_up+0xea/0xfc
 [<c0122416>] ? spin_unlock_irq.clone.28+0x18/0x23
 [<c02d4667>] net_rx_action+0x3f/0xe5
 [<c011e35e>] __do_softirq+0x5b/0xd1
 [<c011e303>] ? local_bh_enable+0xa/0xa
 <IRQ>  [<c011e54b>] ? irq_exit+0x34/0x75
 [<c01034b9>] ? do_IRQ+0x66/0x79
 [<c034e869>] ? common_interrupt+0x29/0x30
 [<c0115ed0>] ? finish_task_switch.clone.118+0x31/0x72
 [<c034cb92>] ? schedule+0x3b2/0x3f1
 [<c012f4b0>] ? hrtimer_start_range_ns+0x10/0x12
 [<c012f4ce>] ? hrtimer_start_expires+0x1c/0x24
 [<c034d5aa>] ? schedule_hrtimeout_range_clock+0x8e/0xb4
 [<c012ed27>] ? update_rmtp+0x68/0x68
 [<c034d5da>] ? schedule_hrtimeout_range+0xa/0xc
 [<c017a913>] ? poll_schedule_timeout+0x27/0x3e
 [<c017b051>] ? do_select+0x488/0x4cd
 [<c0115ee2>] ? finish_task_switch.clone.118+0x43/0x72
 [<c01157ad>] ? need_resched+0x14/0x1e
 [<c017a99e>] ? poll_freewait+0x74/0x74
 [<c01157ad>] ? need_resched+0x14/0x1e
 [<c034cbc1>] ? schedule+0x3e1/0x3f1
 [<c011e55e>] ? irq_exit+0x47/0x75
 [<c01157ad>] ? need_resched+0x14/0x1e
 [<c034cf8a>] ? preempt_schedule_irq+0x44/0x4a
 [<c034dd1e>] ? need_resched+0x17/0x19
 [<c024bc12>] ? put_dec_full+0x7b/0xaa
 [<c0240060>] ? blkdev_ioctl+0x434/0x618
 [<c024bc70>] ? put_dec+0x2f/0x6d
 [<c024c6a5>] ? number.clone.1+0x10b/0x1d0
 [<c034cf8a>] ? preempt_schedule_irq+0x44/0x4a
 [<c034dd1e>] ? need_resched+0x17/0x19
 [<c024d046>] ? vsnprintf+0x225/0x264
 [<c024cea0>] ? vsnprintf+0x7f/0x264
 [<c018346f>] ? seq_printf+0x22/0x40
 [<c01a2fcc>] ? do_task_stat+0x582/0x5a3
 [<c017a913>] ? poll_schedule_timeout+0x27/0x3e
 [<c017b1b5>] ? core_sys_select+0x11f/0x1a3
 [<c017a913>] ? poll_schedule_timeout+0x27/0x3e
 [<c01a34a1>] ? proc_tgid_stat+0xd/0xf
 [<c012357c>] ? recalc_sigpending+0x32/0x35
 [<c0123b9c>] ? __set_task_blocked+0x64/0x6a
 [<c011dfb0>] ? timespec_add_safe+0x24/0x48
 [<c0123449>] ? spin_unlock_irq.clone.16+0x18/0x23
 [<c017b3a1>] ? sys_pselect6+0xe5/0x13e
 [<c034dd65>] ? syscall_call+0x7/0xb
 [<c0340000>] ? rpc_clntdir_depopulate+0x26/0x30
---[ end trace 180dcac41a50938b ]---

Reported-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Offload setting of vlan device requires
vlan_features to be initialized.

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

request_threaded irq will call kzalloc that can sleep. Initializing the flags variable outside of spin_lock_irqsave/restore in bnad_mbox_irq_alloc will avoid call traces like below.

Jun 27 08:15:24 home-t710 kernel: [11735.634550] Brocade 10G Ethernet driver
Jun 27 08:15:24 home-t710 kernel: [11735.634590] bnad_pci_probe : (0xffff880427f3d000, 0xffffffffa020f3e0) PCI Func : (2)
Jun 27 08:15:24 home-t710 kernel: [11735.637677] bna 0000:82:00.2: PCI INT A -> GSI 66 (level, low) -> IRQ 66
Jun 27 08:15:24 home-t710 kernel: [11735.638290] bar0 mapped to ffffc90014980000, len 262144
Jun 27 08:15:24 home-t710 kernel: [11735.638732] BUG: sleeping function called from invalid context at mm/slub.c:847
Jun 27 08:15:24 home-t710 kernel: [11735.638736] in_atomic(): 0, irqs_disabled(): 1, pid: 11243, name: insmod
Jun 27 08:15:24 home-t710 kernel: [11735.638740] Pid: 11243, comm: insmod Not tainted 3.0.0-rc4+ #6
Jun 27 08:15:24 home-t710 kernel: [11735.638743] Call Trace:
Jun 27 08:15:24 home-t710 kernel: [11735.638755]  [<ffffffff81046427>] __might_sleep+0xeb/0xf0
Jun 27 08:15:24 home-t710 kernel: [11735.638766]  [<ffffffffa01fe469>] ? netif_wake_queue+0x3d/0x3d [bna]
Jun 27 08:15:24 home-t710 kernel: [11735.638773]  [<ffffffff8111201c>] kmem_cache_alloc_trace+0x43/0xd8
Jun 27 08:15:24 home-t710 kernel: [11735.638782]  [<ffffffffa01fe469>] ? netif_wake_queue+0x3d/0x3d [bna]
Jun 27 08:15:24 home-t710 kernel: [11735.638787]  [<ffffffff810ab791>] request_threaded_irq+0xa1/0x113
Jun 27 08:15:24 home-t710 kernel: [11735.638798]  [<ffffffffa020f0c0>] bnad_pci_probe+0x612/0x8e5 [bna]
Jun 27 08:15:24 home-t710 kernel: [11735.638807]  [<ffffffffa01fe469>] ? netif_wake_queue+0x3d/0x3d [bna]
Jun 27 08:15:24 home-t710 kernel: [11735.638816]  [<ffffffff81482ef4>] ? _raw_spin_unlock_irqrestore+0x17/0x19
Jun 27 08:15:24 home-t710 kernel: [11735.638822]  [<ffffffff8124d17a>] local_pci_probe+0x44/0x75
Jun 27 08:15:24 home-t710 kernel: [11735.638826]  [<ffffffff8124dc06>] pci_device_probe+0xd0/0xff
Jun 27 08:15:24 home-t710 kernel: [11735.638832]  [<ffffffff812ef8ab>] driver_probe_device+0x131/0x213
Jun 27 08:15:24 home-t710 kernel: [11735.638836]  [<ffffffff812ef9e7>] __driver_attach+0x5a/0x7e
Jun 27 08:15:24 home-t710 kernel: [11735.638840]  [<ffffffff812ef98d>] ? driver_probe_device+0x213/0x213
Jun 27 08:15:24 home-t710 kernel: [11735.638844]  [<ffffffff812ee933>] bus_for_each_dev+0x53/0x89
Jun 27 08:15:24 home-t710 kernel: [11735.638848]  [<ffffffff812ef48a>] driver_attach+0x1e/0x20
Jun 27 08:15:24 home-t710 kernel: [11735.638852]  [<ffffffff812ef0ae>] bus_add_driver+0xd1/0x224
Jun 27 08:15:24 home-t710 kernel: [11735.638858]  [<ffffffffa01b8000>] ? 0xffffffffa01b7fff
Jun 27 08:15:24 home-t710 kernel: [11735.638862]  [<ffffffff812efe57>] driver_register+0x98/0x105
Jun 27 08:15:24 home-t710 kernel: [11735.638866]  [<ffffffffa01b8000>] ? 0xffffffffa01b7fff
Jun 27 08:15:24 home-t710 kernel: [11735.638871]  [<ffffffff8124e4c9>] __pci_register_driver+0x56/0xc1
Jun 27 08:15:24 home-t710 kernel: [11735.638875]  [<ffffffffa01b8000>] ? 0xffffffffa01b7fff
Jun 27 08:15:24 home-t710 kernel: [11735.638884]  [<ffffffffa01b8040>] bnad_module_init+0x40/0x60 [bna]
Jun 27 08:15:24 home-t710 kernel: [11735.638892]  [<ffffffff81002099>] do_one_initcall+0x7f/0x136
Jun 27 08:15:24 home-t710 kernel: [11735.638899]  [<ffffffff8108608b>] sys_init_module+0x88/0x1d0
Jun 27 08:15:24 home-t710 kernel: [11735.638906]  [<ffffffff81489682>] system_call_fastpath+0x16/0x1b
Jun 27 08:15:24 home-t710 kernel: [11735.639642] bnad_pci_probe : (0xffff880427f3e000, 0xffffffffa020f3e0) PCI Func : (3)
Jun 27 08:15:24 home-t710 kernel: [11735.639665] bna 0000:82:00.3: PCI INT A -> GSI 66 (level, low) -> IRQ 66
Jun 27 08:15:24 home-t710 kernel: [11735.639735] bar0 mapped to ffffc90014400000, len 262144

Signed-off-by: Shyam Iyer <shyam_iyer@dell.com>
Acked-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Precedence of the printk should be at higher level so chip fatal
errors are always reported.

Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When we are in a recover process from a chip fatal error,
	driver should skip over execution of mailbox commands during
	resetting chip.

Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Calling icmp_send() on a local message size error leads to
an incorrect update of the path mtu. So use ip_local_error()
instead to notify the socket about the error.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We might call ip_ufo_append_data() for packets that will be IPsec
transformed later. This function should be used just for real
udp packets. So we check for rt->dst.header_len which is only
nonzero on IPsec handling and call ip_ufo_append_data() just
if rt->dst.header_len is zero.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The family arg is not used any more, so remove it.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

IPV6, unlike IPV4, doesn't have a routing cache.

Routing table entries, as well as clones made in response
to route lookup requests, all live in the same table.  And
all of these things are together collected in the destination
cache table for ipv6.

This means that routing table entries count against the garbage
collection limits, even though such entries cannot ever be reclaimed
and are added explicitly by the administrator (rather than being
created in response to lookups).

Therefore it makes no sense to count ipv6 routing table entries
against the GC limits.

Add a DST_NOCOUNT destination cache entry flag, and skip the counting
if it is set.  Use this flag bit in ipv6 when adding routing table
entries.

Signed-off-by: David S. Miller <davem@davemloft.net>

This blows away any flags already set in the entry.

Signed-off-by: David S. Miller <davem@davemloft.net>

Lockdep found a locking inconsistency in the mkiss_close function:

> kernel: [ INFO: inconsistent lock state ]
> kernel: 2.6.39.1 #3
> kernel: ---------------------------------
> kernel: inconsistent {IN-SOFTIRQ-R} -> {SOFTIRQ-ON-W} usage.
> kernel: ax25ipd/2813 [HC0[0]:SC0[0]:HE1:SE1] takes:
> kernel: (disc_data_lock){+++?.-}, at: [<ffffffffa018552b>] mkiss_close+0x1b/0x90 [mkiss]
> kernel: {IN-SOFTIRQ-R} state was registered at:

The message hints that disc_data_lock is aquired with softirqs disabled,
but does not itself disable softirqs, which can in rare circumstances
lead to a deadlock. 
The same problem is present in the 6pack driver, this patch fixes both
by using write_lock_bh instead of write_lock.

Reported-by: Bernard F6BVP <f6bvp@free.fr>
Tested-by: Bernard F6BVP <f6bvp@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ralf <Baechle&lt;ralf@linux-mips.org>
Cc: stable@kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (24 commits)
  usbnet: Remove over-broad module alias from zaurus.
  MAINTAINERS: drop Michael from bfin_mac driver
  net/can: activate bit-timing calculation and netlink based drivers by default
  rionet: fix NULL pointer dereference in rionet_remove
  net+crypto: Use vmalloc for zlib inflate buffers.
  netfilter: Fix ip_route_me_harder triggering ip_rt_bug
  ipv4: Fix IPsec slowpath fragmentation problem
  ipv4: Fix packet size calculation in __ip_append_data
  cxgb3: skb_record_rx_queue now records the queue index relative to the net_device.
  bridge: Only flood unregistered groups to routers
  qlge: Add maintainer.
  MAINTAINERS: mark socketcan-core lists as subscribers-only
  MAINTAINERS: Remove Sven Eckelmann from BATMAN ADVANCED
  r8169: fix wrong register use.
  net/usb/kalmia: signedness bug in kalmia_bind()
  net/usb: kalmia: Various fixes for better support of non-x86 architectures.
  rtl8192cu: Fix missing firmware load
  udp/recvmsg: Clear MSG_TRUNC flag when starting over for a new packet
  ipv6/udp: Use the correct variable to determine non-blocking condition
  netconsole: fix build when CONFIG_NETCONSOLE_DYNAMIC is turned on
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/avr32-2.6:
  MAINTAINERS: update AVR32 and AT32AP maintainers

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  watchdog: update author email for at32ap700x_wdt
  watchdog: gef_wdt: fix MODULE_ALIAS
  watchdog: Intel SCU Watchdog: Fix build and remove duplicate code
  watchdog: mtx1-wdt: fix section mismatch
  watchdog: mtx1-wdt: fix GPIO toggling
  watchdog: mtx1-wdt: request gpio before using it
  watchdog: Handle multiple wm831x watchdogs being registered

* 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x:
  sh: use printk_ratelimited instead of printk_ratelimit
  sh: Fix up unmet dependency warnings with USB EHCI/OHCI selects.
  sh: fix the value of sh_dmae_slave_config in setup-sh7757
  sh: fix the INTC vector for IRQ and IRL in setup-sh7757
  sh: add to select the new configuration for USB EHCI/OHCI
  sh: add platform_device of EHCI/OHCI to setup-sh7757
  sh: fix compile error using sh7757lcr_defconfig

Merge branch 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x

* 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x:
  ARM: mach-shmobile: make a struct in board-ap4evb.c static
  ARM: mach-shmobile: ag5evm: consistently name sdhi info structures
  ARM: mach-shmobile: mackerel: change usbhs devices order

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into for-davem

This alters the maintenance of the AVR32 architecture and the AT32AP machine
code to be shared between Haavard Skinnemoen and me. The status is also changed
to maintained, as we no longer are being paid to look after this architecture.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Acked-by: Haavard Skinnemoen <hskinnemoen@gmail.com>

Follows the powerpc change, for much the same rationale.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

struct soc_camera_link imx074_link in board-ap4evb.c doesn't have
to be global.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms: increase rom size for atrm method

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: caam - fix operator precedence in shared descriptor allocation

The vbios rom is >64k on a lot of modern asics.  Increase
the fetch size for atrm to make sure we don't miss part
of a larger rom.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

setkey allocates 16 bytes (CAAM_CMD_SZ *
DESC_AEAD_SHARED_TEXT_LEN) shy of what is needed to
store the shared descriptor, resulting in memory
corruption.  Fix this.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

We would free the proper number of curves, but in the wrong
slots, due to a missing level of indirection through
the pdgain_idx table.

It's simpler just to try to free all four slots, so do that.

Cc: stable@kernel.org
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

When no interface has been brought up, the chip's power
state continued as AWAKE. So during resume, the chip never
been powered up.

Cc: stable@kernel.org
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

* 'kvm-updates/3.0' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86 emulator: fix %rip-relative addressing with immediate source operand

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c/pca954x: Initialize the mux to disconnected state
  i2c-taos-evm: Fix log messages

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  arch/powerpc: use printk_ratelimited instead of printk_ratelimit
  powerpc/rtas-rtc: remove sideeffects of printk_ratelimit
  powerpc/pseries: remove duplicate SCSI_BNX2_ISCSI in pseries_defconfig
  powerpc/e500: fix breakage with fsl_rio_mcheck_exception
  powerpc/p1022ds: fix audio-related properties in the device tree
  powerpc/85xx: fix NAND_CMD_READID read bytes number