- Jul 13, 2013
-
-
Theodore Ts'o authored
The filesystem should not be marked inconsistent if ext4_free_blocks() is not able to allocate memory. Unfortunately some callers (most notably ext4_truncate) don't have a way to reflect an error back up to the VFS. And even if we did, most userspace applications won't deal with most system calls returning ENOMEM anyway. Reported-by:
Nagachandra P <nagachandra@gmail.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
-
Theodore Ts'o authored
Replace "assertation" with "assertion" in lots and lots of debugging messages. Correct the comment stating when ext4_es_insert_extent() is used. It was no doubt tree at one point, but it is no longer true... Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Cc: Zheng Liu <gnehzuil.liu@gmail.com>
-
- Jul 12, 2013
-
-
Anatol Pomozov authored
If there are a lot of outstanding buffered IOs when a device is taken offline (due to hardware errors etc), ext4_end_bio prints out a message for each failed logical block. While this is desirable, we see thousands of such lines being printed out before the serial console gets overwhelmed, causing ext4_end_bio() wait for the printk to complete. This in itself isn't a disaster, except for the detail that this function is being called with the queue lock held. This causes any other function in the block layer to spin on its spin_lock_irqsave while the serial console is draining. If NMI watchdog is enabled on this machine then it eventually comes along and shoots the machine in the head. The end result is that losing any one disk causes the machine to go down. This patch rate limits the printk to bandaid around the problem. Tested: xfstests Change-Id: I8ab5690dcf4f3a67e78be147d45e489fdf4a88d8 Signed-off-by:
Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
Theodore Ts'o authored
We now print mount options in a generic fashion in ext4_show_options(), so we shouldn't be explicitly printing the {usr,grp}quota options in ext4_show_quota_options(). Without this patch, /proc/mounts can look like this: /dev/vdb /vdb ext4 rw,relatime,quota,usrquota,data=ordered,usrquota 0 0 ^^^^^^^^ ^^^^^^^^ Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
-
- Jul 11, 2013
-
-
Jan Kara authored
The following race can lead to ext4_evict_inode() seeing i_ioend_count > 0 and thus triggering a sanity check warning: CPU1 CPU2 ext4_end_bio() ext4_evict_inode() ext4_finish_bio() end_page_writeback(); truncate_inode_pages() evict page WARN_ON(i_ioend_count > 0); ext4_put_io_end_defer() ext4_release_io_end() dec i_ioend_count This is possible use-after-free bug since we decrement i_ioend_count in possibly released inode. Since i_ioend_count is used only for sanity checks one possible solution would be to just remove it but for now I'd like to keep those sanity checks to help debugging the new ext4 writeback code. This patch changes ext4_end_bio() to call ext4_put_io_end_defer() before ext4_finish_bio() in the shortcut case when unwritten extent conversion isn't needed. In that case we don't need the io_end so we are safe to drop it early. Reported-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
- Jul 06, 2013
-
-
Theodore Ts'o authored
The function ext4_get_group_number() was introduced as an optimization in commit bd86298e . Unfortunately, this commit incorrectly calculate the group number for file systems with a 1k block size (when s_first_data_block is 1 instead of zero). This could cause the following kernel BUG: [ 568.877799] ------------[ cut here ]------------ [ 568.877833] kernel BUG at fs/ext4/mballoc.c:3728! [ 568.877840] Oops: Exception in kernel mode, sig: 5 [#1] [ 568.877845] SMP NR_CPUS=32 NUMA pSeries [ 568.877852] Modules linked in: binfmt_misc [ 568.877861] CPU: 1 PID: 3516 Comm: fs_mark Not tainted 3.10.0-03216-g7c6809f-dirty #1 [ 568.877867] task: c0000001fb0b8000 ti: c0000001fa954000 task.ti: c0000001fa954000 [ 568.877873] NIP: c0000000002f42a4 LR: c0000000002f4274 CTR: c000000000317ef8 [ 568.877879] REGS: c0000001fa956ed0 TRAP: 0700 Not tainted (3.10.0-03216-g7c6809f-dirty) [ 568.877884] MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI> CR: 24000428 XER: 00000000 [ 568.877902] SOFTE: 1 [ 568.877905] CFAR: c0000000002b5464 [ 568.877908] GPR00: 0000000000000001 c0000001fa957150 c000000000c6a408 c0000001fb588000 GPR04: 0000000000003fff c0000001fa9571c0 c0000001fa9571c4 000138098c50625f GPR08: 1301200000000000 0000000000000002 0000000000000001 0000000000000000 GPR12: 0000000024000422 c00000000f33a300 0000000000008000 c0000001fa9577f0 GPR16: c0000001fb7d0100 c000000000c29190 c0000000007f46e8 c000000000a14672 GPR20: 0000000000000001 0000000000000008 ffffffffffffffff 0000000000000000 GPR24: 0000000000000100 c0000001fa957278 c0000001fdb2bc78 c0000001fa957288 GPR28: 0000000000100100 c0000001fa957288 c0000001fb588000 c0000001fdb2bd10 [ 568.877993] NIP [c0000000002f42a4] .ext4_mb_release_group_pa+0xec/0x1c0 [ 568.877999] LR [c0000000002f4274] .ext4_mb_release_group_pa+0xbc/0x1c0 [ 568.878004] Call Trace: [ 568.878008] [c0000001fa957150] [c0000000002f4274] .ext4_mb_release_group_pa+0xbc/0x1c0 (unreliable) [ 568.878017] [c0000001fa957200] [c0000000002fb070] .ext4_mb_discard_lg_preallocations+0x394/0x444 [ 568.878025] [c0000001fa957340] [c0000000002fb45c] .ext4_mb_release_context+0x33c/0x734 [ 568.878032] [c0000001fa957440] [c0000000002fbcf8] .ext4_mb_new_blocks+0x4a4/0x5f4 [ 568.878039] [c0000001fa957510] [c0000000002ef56c] .ext4_ext_map_blocks+0xc28/0x1178 [ 568.878047] [c0000001fa957640] [c0000000002c1a94] .ext4_map_blocks+0x2c8/0x490 [ 568.878054] [c0000001fa957730] [c0000000002c536c] .ext4_writepages+0x738/0xc60 [ 568.878062] [c0000001fa957950] [c000000000168a78] .do_writepages+0x5c/0x80 [ 568.878069] [c0000001fa9579d0] [c00000000015d1c4] .__filemap_fdatawrite_range+0x88/0xb0 [ 568.878078] [c0000001fa957aa0] [c00000000015d23c] .filemap_write_and_wait_range+0x50/0xfc [ 568.878085] [c0000001fa957b30] [c0000000002b8edc] .ext4_sync_file+0x220/0x3c4 [ 568.878092] [c0000001fa957be0] [c0000000001f849c] .vfs_fsync_range+0x64/0x80 [ 568.878098] [c0000001fa957c70] [c0000000001f84f0] .vfs_fsync+0x38/0x4c [ 568.878105] [c0000001fa957d00] [c0000000001f87f4] .do_fsync+0x54/0x90 [ 568.878111] [c0000001fa957db0] [c0000000001f8894] .SyS_fsync+0x28/0x3c [ 568.878120] [c0000001fa957e30] [c000000000009c88] syscall_exit+0x0/0x7c [ 568.878125] Instruction dump: [ 568.878130] 60000000 813d0034 81610070 38000000 7f8b4800 419e001c 813f007c 7d2bfe70 [ 568.878144] 7d604a78 7c005850 54000ffe 7c0007b4 <0b000000> e8a10076 e87f0090 7fa4eb78 [ 568.878160] ---[ end trace 594d911d9654770b ]--- In addition fix the STD_GROUP optimization so that it works for bigalloc file systems as well. Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Reported-by:
Li Zhong <lizhongfs@gmail.com> Reviewed-by:
Lukas Czerner <lczerner@redhat.com> Cc: stable@vger.kernel.org # 3.10
-
Jan Kara authored
The loop in mpage_map_and_submit_extent() is guaranteed to always run at least once since the caller of mpage_map_and_submit_extent() makes sure map->m_len > 0. So make that explicit using do-while instead of pure while which also silences the compiler warning about uninitialized 'err' variable. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Reviewed-by:
Lukas Czerner <lczerner@redhat.com>
-
- Jul 01, 2013
-
-
Ashish Sangwan authored
Both hole punch and truncate use ext4_ext_rm_leaf() for removing blocks. Currently we choose the last extent as the starting point for removing blocks: ex = EXT_LAST_EXTENT(eh); This is OK for truncate but for hole punch we can optimize the extent selection as the path is already initialized. We could use this information to select proper starting extent. The code change in this patch will not affect truncate as for truncate path[depth].p_ext will always be NULL. Signed-off-by:
Ashish Sangwan <a.sangwan@samsung.com> Signed-off-by:
Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
Theodore Ts'o authored
If jbd2_journal_restart() fails the handle will have been disconnected from the current transaction. In this situation, the handle must not be used for for any jbd2 function other than jbd2_journal_stop(). Enforce this with by treating a handle which has a NULL transaction pointer as an aborted handle, and issue a kernel warning if jbd2_journal_extent(), jbd2_journal_get_write_access(), jbd2_journal_dirty_metadata(), etc. is called with an invalid handle. This commit also fixes a bug where jbd2_journal_stop() would trip over a kernel jbd2 assertion check when trying to free an invalid handle. Also move the responsibility of setting current->journal_info to start_this_handle(), simplifying the three users of this function. Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Reported-by:
Younger Liu <younger.liu@huawei.com> Cc: Jan Kara <jack@suse.cz>
-
Theodore Ts'o authored
Translate the bitfields used in various flags argument to strings to make the tracepoint output more human-readable. Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
Theodore Ts'o authored
The function mpage_released_unused_page() must only be called once; otherwise the kernel will BUG() when the second call to mpage_released_unused_page() tries to unlock the pages which had been unlocked by the first call. Also restructure the error handling so that we only give up on writing the dirty pages in the case of ENOSPC where retrying the allocation won't help. Otherwise, a transient failure, such as a kmalloc() failure in calling ext4_map_blocks() might cause us to give up on those pages, leading to a scary message in /var/log/messages plus data loss. Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Reviewed-by:
Jan Kara <jack@suse.cz>
-
Theodore Ts'o authored
Once we decrement transaction->t_updates, if this is the last handle holding the transaction from closing, and once we release the t_handle_lock spinlock, it's possible for the transaction to commit and be released. In practice with normal kernels, this probably won't happen, since the commit happens in a separate kernel thread and it's unlikely this could all happen within the space of a few CPU cycles. On the other hand, with a real-time kernel, this could potentially happen, so save the tid found in transaction->t_tid before we release t_handle_lock. It would require an insane configuration, such as one where the jbd2 thread was set to a very high real-time priority, perhaps because a high priority real-time thread is trying to read or write to a file system. But some people who use real-time kernels have been known to do insane things, including controlling laser-wielding industrial robots. :-) Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
-
Lukas Czerner authored
Currently if we pass range into ext4_zero_partial_blocks() which covers entire block we would attempt to zero it even though we should only zero unaligned part of the block. Fix this by checking whether the range covers the whole block skip zeroing if so. Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
Theodore Ts'o authored
The function ext4_write_inline_data_end() can return an error. So we need to assign it to a signed integer variable to check for an error return (since copied is an unsigned int). Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Cc: Zheng Liu <wenqing.lz@taobao.com> Cc: stable@vger.kernel.org
-
jon ernst authored
Comparing unsigned variable with 0 always returns false. err = 0 is duplicated and unnecessary. [ tytso: Also cleaned up error handling in ext4_block_zero_page_range() ] Signed-off-by:
"Jon Ernst" <jonernst07@gmx.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
Al Viro authored
Both ext3 and ext4 htree_dirblock_to_tree() is just filling the in-core rbtree for use by call_filldir(). All updates of ->f_pos are done by the latter; bumping it here (on error) is obviously wrong - we might very well have it nowhere near the block we'd found an error in. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
-
Theodore Ts'o authored
Some of the functions which modify the jbd2 superblock were not updating the checksum before calling jbd2_write_superblock(). Move the call to jbd2_superblock_csum_set() to jbd2_write_superblock(), so that the checksum is calculated consistently. Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: stable@vger.kernel.org
-
Ashish Sangwan authored
No need to pass file pointer when we can directly pass inode pointer. Signed-off-by:
Ashish Sangwan <a.sangwan@samsung.com> Signed-off-by:
Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
boxi liu authored
In ext4 feature inline_data,it use the xattr's space to store the inline data in inode.When we calculate the inline data as the xattr,we add the pad.But in get_max_inline_xattr_value_size() function we count the free space without pad.It cause some contents are moved to a block even if it can be stored in the inode. Signed-off-by:
liulei <lewis.liulei@huawei.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Reviewed-by:
Tao Ma <boyu.mt@taobao.com>
-
Joe Perches authored
Reduce the object size ~10% could be useful for embedded systems. Add #ifdef CONFIG_PRINTK #else #endif blocks to hold formats and arguments, passing " " to functions when !CONFIG_PRINTK and still verifying format and arguments with no_printk. $ size fs/ext4/built-in.o* text data bss dec hex filename 239375 610 888 240873 3ace9 fs/ext4/built-in.o.new 264167 738 888 265793 40e41 fs/ext4/built-in.o.old $ grep -E "CONFIG_EXT4|CONFIG_PRINTK" .config # CONFIG_PRINTK is not set CONFIG_EXT4_FS=y CONFIG_EXT4_USE_FOR_EXT23=y CONFIG_EXT4_FS_POSIX_ACL=y # CONFIG_EXT4_FS_SECURITY is not set # CONFIG_EXT4_DEBUG is not set Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
Zheng Liu authored
Now we maintain an proper in-order LRU list in ext4 to reclaim entries from extent status tree when we are under heavy memory pressure. For keeping this order, a spin lock is used to protect this list. But this lock burns a lot of CPU time. We can use the following steps to trigger it. % cd /dev/shm % dd if=/dev/zero of=ext4-img bs=1M count=2k % mkfs.ext4 ext4-img % mount -t ext4 -o loop ext4-img /mnt % cd /mnt % for ((i=0;i<160;i++)); do truncate -s 64g $i; done % for ((i=0;i<160;i++)); do cp $i /dev/null &; done % perf record -a -g % perf report This commit tries to fix this problem. Now a new member called i_touch_when is added into ext4_inode_info to record the last access time for an inode. Meanwhile we never need to keep a proper in-order LRU list. So this can avoid to burns some CPU time. When we try to reclaim some entries from extent status tree, we use list_sort() to get a proper in-order list. Then we traverse this list to discard some entries. In ext4_sb_info, we use s_es_last_sorted to record the last time of sorting this list. When we traverse the list, we skip the inode that is newer than this time, and move this inode to the tail of LRU list. When the head of the list is newer than s_es_last_sorted, we will sort the LRU list again. In this commit, we break the loop if s_extent_cache_cnt == 0 because that means that all extents in extent status tree have been reclaimed. Meanwhile in this commit, ext4_es_{un}register_shrinker()'s prototype is changed to save a local variable in these functions. Reported-by:
Dave Hansen <dave.hansen@intel.com> Signed-off-by:
Zheng Liu <wenqing.lz@taobao.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
Alexey Khoroshilov authored
If memory allocation in ext4_mb_new_group_pa() is failed, it returns error code, ext4_mb_new_preallocation() propages it, but ext4_mb_new_blocks() ignores it. An observed result was: - allocation fail means ext4_mb_new_group_pa() does not update ext4_allocation_context; - ext4_mb_new_blocks() sets ext4_allocation_request->len (ar->len = ac->ac_b_ex.fe_len;) to number of blocks preallocated (512) instead of number of blocks requested (1); - that activates update cycle in ext4_splice_branch(): for (i = 1; i < blks; i++) <-- blks is 512 instead of 1 here *(where->p + i) = cpu_to_le32(current_block++); - it iterates 511 times and corrupts a chunk of memory including inode structure; - page fault happens at EXT4_SB(inode->i_sb) in ext4_mark_inode_dirty(); - system hangs with 'scheduling while atomic' BUG. The patch implements a check for ext4_mb_new_preallocation() error code and handles its failure as if ext4_mb_regular_allocator() fails. Found by Linux File System Verification project (linuxtesting.org). [ Patch restructed by tytso to make the flow of control easier to follow. ] Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
Maarten ter Huurne authored
Subtracting the number of the first data block places the superblock backups one block too early, corrupting the file system. When the block size is larger than 1K, the first data block is 0, so the subtraction has no effect and no corruption occurs. Signed-off-by:
Maarten ter Huurne <maarten@treewalker.org> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Reviewed-by:
Jan Kara <jack@suse.cz> CC: stable@vger.kernel.org
-
- Jun 17, 2013
-
-
Jon Ernst authored
This patch removed several unused variables. Signed-off-by:
Jon Ernst <jonernst07@gmx.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
- Jun 13, 2013
-
-
Jie Liu authored
Return the FIEMAP_EXTENT_UNKNOWN flag as well except the FIEMAP_EXTENT_DELALLOC because the data location of an delayed allocation extent is unknown. Signed-off-by:
Jie Liu <jeff.liu@oracle.com>
-
Paul Gortmaker authored
Commit b6e96d00 ("jbd2: use module parameters instead of debugfs for jbd_debug") removed any need for a dependency on DEBUG_FS. It also moved the /sys variables out from underneath the typical debugfs mount point. Delete the dependency and update the /sys path to where the debug settings are currently. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
Paul Gortmaker authored
Since the jbd_debug() is implemented with two separate printk() calls, it can lead to corrupted and misleading debug output like the following (see lines marked with "*"): [ 290.339362] (fs/jbd2/journal.c, 203): kjournald2: kjournald2 wakes [ 290.339365] (fs/jbd2/journal.c, 155): kjournald2: commit_sequence=42103, commit_request=42104 [ 290.339369] (fs/jbd2/journal.c, 158): kjournald2: OK, requests differ [* 290.339376] (fs/jbd2/journal.c, 648): jbd2_log_wait_commit: [* 290.339379] (fs/jbd2/commit.c, 370): jbd2_journal_commit_transaction: JBD2: want 42104, j_commit_sequence=42103 [* 290.339382] JBD2: starting commit of transaction 42104 [ 290.339410] (fs/jbd2/revoke.c, 566): jbd2_journal_write_revoke_records: Wrote 0 revoke records [ 290.376555] (fs/jbd2/commit.c, 1088): jbd2_journal_commit_transaction: JBD2: commit 42104 complete, head 42079 i.e. the debug output from log_wait_commit and journal_commit_transaction have become interleaved. The output should have been: (fs/jbd2/journal.c, 648): jbd2_log_wait_commit: JBD2: want 42104, j_commit_sequence=42103 (fs/jbd2/commit.c, 370): jbd2_journal_commit_transaction: JBD2: starting commit of transaction 42104 It is expected that this is not easy to replicate -- I was only able to cause it on preempt-rt kernels, and even then only under heavy I/O load. Reported-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Suggested-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
Paul Gortmaker authored
The bit_spinlock functions are only used for the jbd_lock_bh_state functions (and friends) in jbd_common.h and are not directly used by either of jbd.h or jbd2.h content. The jbd_common file is new as of commit 44606672 ("jdb/jbd2: factor out common functions from the jbd[2] header files") but common (and isolated) headers were not considered for factoring at that time. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
Paul Gortmaker authored
Currently we see this output: $git grep phase fs/jbd2 fs/jbd2/commit.c: jbd_debug(3, "JBD2: commit phase 1\n"); fs/jbd2/commit.c: jbd_debug(3, "JBD2: commit phase 2\n"); fs/jbd2/commit.c: jbd_debug(3, "JBD2: commit phase 2\n"); fs/jbd2/commit.c: jbd_debug(3, "JBD2: commit phase 3\n"); fs/jbd2/commit.c: jbd_debug(3, "JBD2: commit phase 4\n"); [...] There is clearly a duplicate label for phase 2, and they are both active (i.e. not in #if ... #else block). Rename them to be "2a" and "2b" so the debug output is unambiguous. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
Paul Gortmaker authored
While trying to debug an an issue under extreme I/O loading on preempt-rt kernels, the following backtrace was observed via SysRQ output: rm D ffff8802203afbc0 4600 4878 4748 0x00000000 ffff8802217bfb78 0000000000000082 ffff88021fc2bb80 ffff88021fc2bb80 ffff88021fc2bb80 ffff8802217bffd8 ffff8802217bffd8 ffff8802217bffd8 ffff88021f1d4c80 ffff88021fc2bb80 ffff8802217bfb88 ffff88022437b000 Call Trace: [<ffffffff8172dc34>] schedule+0x24/0x70 [<ffffffff81225b5d>] jbd2_log_wait_commit+0xbd/0x140 [<ffffffff81060390>] ? __init_waitqueue_head+0x50/0x50 [<ffffffff81223635>] jbd2_log_do_checkpoint+0xf5/0x520 [<ffffffff81223b09>] __jbd2_log_wait_for_space+0xa9/0x1f0 [<ffffffff8121dc40>] start_this_handle.isra.10+0x2e0/0x530 [<ffffffff81060390>] ? __init_waitqueue_head+0x50/0x50 [<ffffffff8121e0a3>] jbd2__journal_start+0xc3/0x110 [<ffffffff811de7ce>] ? ext4_rmdir+0x6e/0x230 [<ffffffff8121e0fe>] jbd2_journal_start+0xe/0x10 [<ffffffff811f308b>] ext4_journal_start_sb+0x5b/0x160 [<ffffffff811de7ce>] ext4_rmdir+0x6e/0x230 [<ffffffff811435c5>] vfs_rmdir+0xd5/0x140 [<ffffffff8114370f>] do_rmdir+0xdf/0x120 [<ffffffff8105c6b4>] ? task_work_run+0x44/0x80 [<ffffffff81002889>] ? do_notify_resume+0x89/0x100 [<ffffffff817361ae>] ? int_signal+0x12/0x17 [<ffffffff81145d85>] sys_unlinkat+0x25/0x40 [<ffffffff81735f22>] system_call_fastpath+0x16/0x1b What is interesting here, is that we call log_wait_commit, from within wait_for_space, but we are still holding the checkpoint_mutex as it surrounds mostly the whole of wait_for_space. And then, as we are waiting, journal_commit_transaction can run, and if the JBD2_FLUSHED bit is set, then we will also try to take the same checkpoint_mutex. It seems that we need to drop the checkpoint_mutex while sitting in jbd2_log_wait_commit, if we want to guarantee that progress can be made by jbd2_journal_commit_transaction(). There does not seem to be anything preempt-rt specific about this, other then perhaps increasing the odds of it happening. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
Paul Gortmaker authored
The state lock is taken after we are doing an assert on the state value, not before. So we might in fact be doing an assert on a transient value. Ensure the state check is within the scope of the state lock being taken. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
Dmitry Monakhov authored
If filesystem was aborted after inode's write back is complete but before its metadata was updated we may return success results in data loss. In order to handle fs abort correctly we have to check fs state once we discover that it is in MS_RDONLY state Test case: http://patchwork.ozlabs.org/patch/244297 Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
Dmitry Monakhov authored
Inode's data or non journaled quota may be written w/o jounral so we _must_ send a barrier at the end of ext4_sync_fs. But it can be skipped if journal commit will do it for us. Also fix data integrity for nojournal mode. Signed-off-by:
Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
Dmitry Monakhov authored
Current implementation of jbd2_journal_force_commit() is suboptimal because result in empty and useless commits. But callers just want to force and wait any unfinished commits. We already have jbd2_journal_force_commit_nested() which does exactly what we want, except we are guaranteed that we do not hold journal transaction open. Signed-off-by:
Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
- Jun 12, 2013
-
-
Theodore Ts'o authored
Commit 18888cf0 : "ext4: speed up truncate/unlink by not using bforget() unless needed" removed the use of EXT4_FREE_BLOCKS_FORGET in the most important codepath for file systems using extents, but a similar optimization also can be done for file systems using indirect blocks, and for the two special cases in the ext4 extents code. Cc: Andrey Sidorov <qrxd43@motorola.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
Theodore Ts'o authored
For a file systems with a very large number of block groups, if all of the block group bitmaps are in memory and the file system is relatively badly fragmented, it's possible ext4_mb_regular_allocator() to take a long time trying to find a good match. This is especially true if the tuning parameter mb_max_to_scan has been sent to a very large number. So add a cond_resched() to avoid soft lockup warnings and to provide better system responsiveness. For ext4_free_blocks(), if we are deleting a large range of blocks, and data=journal is enabled so that EXT4_FREE_BLOCKS_FORGET is passed, the loop to call sb_find_get_block() and to call ext4_forget() can take over 10-15 milliseocnds or more. So it's better to add a cond_resched() here a well. Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
- Jun 07, 2013
-
-
Theodore Ts'o authored
Rename ext4_da_writepages() to ext4_writepages() and use it for all modes. We still need to iterate over all the pages in the case of data=journalling, but in the case of nodelalloc/data=ordered (which is what file systems mounted using ext3 backwards compatibility will use) this will allow us to use a much more efficient I/O submission path. Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
- Jun 06, 2013
-
-
Theodore Ts'o authored
The test_root() function could potentially loop forever due to overflow issues. So rewrite test_root() to avoid this issue; as a bonus, it is 38% faster when benchmarked via a test loop: int main(int argc, char **argv) { int i; for (i = 0; i < 1 << 24; i++) { if (test_root(i, 7)) printf("%d\n", i); } } Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
Theodore Ts'o authored
The group number passed to ext4_get_group_info() should be valid, but let's add an assert to check this before we start creating a pointer based on that group number and dereferencing it. Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
Theodore Ts'o authored
Check the group number for sanity earilier, before calling routines such as ext4_bg_has_super() or ext4_group_overhead_blocks(). Reported-by:
Jonathan Salwan <jonathan.salwan@gmail.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-