- May 05, 2015
-
-
Suman Anna authored
The L3 Error handling on OMAP5 for the most part is very similar to that of OMAP4, and had leveraged common data structures and register layout definitions so far. Upon closer inspection, there are a few minor differences causing an incorrect decoding and reporting of the master NIU upon an error: 1. The L3_TARG_STDERRLOG_MSTADDR.STDERRLOG_MSTADDR occupies 11 bits on OMAP5 as against 8 bits on OMAP4, with the master NIU connID encoded in the 6 MSBs of the STDERRLOG_MSTADDR field. 2. The CLK3 FlagMux component has 1 input source on OMAP4 and 3 input sources on OMAP5. The common DEBUGSS source is at a different input on each SoC. Fix the above issues by using a OMAP5-specific compatible property and using SoC-specific data where there are differences. Signed-off-by:
Suman Anna <s-anna@ti.com> Acked-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Illia Smyrnov authored
The base address for DRA7 CLK1_HOST_CLK1_2 host instance is 0x44800000, so correct offset is 0x800000. DRA7 TRM rev X(fewb 2015) has updates for this information. With wrong offset these errors are not correctly cleared by the L3 IRQ handler and cause an continuous interrupt scenario and system lockup. Signed-off-by:
Illia Smyrnov <illia.smyrnov@globallogic.com> Signed-off-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Nishanth Menon authored
Fix a typo in DRA7 dtsi where 12 bytes are needed for register description of ABB efuse registers, however only 8 bytes are provided to map. For some weird reason, this does not generate abort at offset 0x8, probably due to default maps already provided in io.c for the bus register ranges. Reported-by:
Matt Gessner <Matt.Gessner@windriver.com> Reported-by:
Suman Anna <s-anna@ti.com> Signed-off-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Nishanth Menon authored
BeagleBoard-X15 pre-production change includes switching the GPIO fan gpio over from 1 to 2 to allow for a potential fix at a later point in time for USB client VBUS detection using PMIC VBUS detect capability. Signed-off-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Nishanth Menon authored
BeagleBoard-X15 pre-production change includes switching over to UART pins that now allow for UART download capability. All original boards should either have been returned for modifications or already modified for the required change and maintaining compatibility for older boards are no longer needed. Signed-off-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Felipe Balbi authored
The new AM437x SK Beta boards have removed the large capacitors on the gpio-matrix column lines which means we can reduce col-scan-delay-us to 5us without loosing functionality. Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Felipe Balbi authored
AM437x Starter Kit uses a NewHaven Display module with a 4.3" display and EDT FT5306 touchscreen On that module's new revision, NewHave decided to change the pinout on the 6 pin flat-pcb touchscreen connector so that instead of having WAKE pin, we now have RESETn. The new display module is available on AM437x SK Beta and all new revisions while the older revision is only available on AM437x SK Alpha which, unfortunately, can't be supported anymore in mainline without a revert of this patch. Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Nishanth Menon authored
With commit bc078316 ("ARM: dts: DRA7: Add node for RTC"), we now have AM57xx RTC register itself as alias 0 even before DS1307 or TPS rtc drivers are loaded up. However, since neither TPS, nor AM57xx RTC are capable of being backedup by battery, we would like to maintain the "primary" rtc as mcp79410 rtc device. This also generates the following warnings in the bootlog highlighting the issue: [ 5.895445] rtc-ds1307 2-006f: /aliases ID 0 not available ... [ 6.476285] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: /aliases ID 1 not available So, add proper aliases to ensure that RTC order is always consistent to userspace immaterial of probe order. Signed-off-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Grygorii Strashko authored
The interrupt polarity provided in devicetree is used to configure the interrupt controller(ARM GIC), however, it seems that we have an inverter at the GIC boundary inside AM57xx which inverts the signal input from sys_irq external interrupt source. Further, as per GIC distributor TRM, http://infocenter.arm.com/help/topic/com.arm.doc.ddi0438d/BGBHIACJ.html#BABJFCFB ARM GIC distributor does not support IRQ trigger type IRQ_TYPE_LEVEL_LOW, and only rising or level high signals. However, for some reason, the current configuration(which gets ignored by GIC driver) functions on some platforms, however, on few platforms results in infinite interrupts hogging the system down. Switch over to rising edge for GIC configuration which is also aligned with trigger point from the RTC chip and the internal inversion. Fixes: 5a0f93c6 ("ARM: dts: Add am57xx-beagle-x15") Signed-off-by:
Grygorii Strashko <Grygorii.Strashko@linaro.org> Signed-off-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Sebastian Reichel authored
Add missing #iommu-cells property to the isp and iva iommu nodes. This fixes the binding (property is required according to the generic iommu binding) and removes the following kernel warning triggered once the iommu nodes are referenced: [ 0.647521] /ocp/isp@480bc000: could not get #iommu-cells for /ocp/mmu@480bd400 Signed-off-by:
Sebastian Reichel <sre@kernel.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Roger Quadros authored
We need to enable EXTCON_USB_GPIO_USB and not EXTCON_GPIO_USB. Fixes: c08a54c0 ("ARM: omap2plus_defconfig: Enable EXTCON_GPIO_USB") Reported-by:
Nishant Menon <nm@ti.com> Signed-off-by:
Roger Quadros <rogerq@ti.com> Acked-by-by:
Nishanth Menon <nm@ti.com> Tested-by:
Nishanth Menon <nm@ti.com> Reviewed-by:
Felipe Balbi <balbi@ti.com> Acked-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Pavel Machek authored
N900 audio recording needs that codec provides bias voltage for integrated digital microphone and headset microphone depending which one is used. Digital microphone uses 2 V bias and it comes from the codec A part. Codec B part drives the headset microphone bias and that is set to 2.5 V. Cc: stable@vger.kernel.org # v3.16+ Signed-off-by:
Pavel Machek <pavel@ucw.cz> [Jarkko: Headset mic bias changed to 2 (2.5 V) as it was before commit e2e8bfdf ("ASoC: tlv320aic3x: Convert mic bias to a supply widget")] Signed-off-by:
Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
- May 04, 2015
-
-
Tony Lindgren authored
If we use a combination of VMODE and I2C4 for retention modes, eventually the off idle power consumption will creep up by about 23mW, even during off mode with I2C4 always staying enabled. Turns out this is because of erratum i531 "Extra Power Consumed When Repeated Start Operation Mode Is Enabled on I2C Interface Dedicated for Smart Reflex (I2C4)" as pointed out by Nishanth Menon <nm@ti.com>. Let's fix the issue by adding i2c_cfg_clear_mask for the bits to clear when initializing the I2C4 adapter so we can clear SREN bit that drives the I2C4 lines low otherwise when there is no traffic. Fixes: 3b8c4ebb ("ARM: OMAP3: Fix idle mode signaling for Cc: stable@vger.kernel.org # v3.16+ sys_clkreq and sys_off_mode") Cc: Kevin Hilman <khilman@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Reviewed-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
- Apr 27, 2015
-
-
Linus Torvalds authored
-
Andy Lutomirski authored
AMD CPUs don't reinitialize the SS descriptor on SYSRET, so SYSRET with SS == 0 results in an invalid usermode state in which SS is apparently equal to __USER_DS but causes #SS if used. Work around the issue by setting SS to __KERNEL_DS __switch_to, thus ensuring that SYSRET never happens with SS set to NULL. This was exposed by a recent vDSO cleanup. Fixes: e7d6eefa x86/vdso32/syscall.S: Do not load __USER32_DS to %ss Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Peter Anvin <hpa@zytor.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Brian Gerst <brgerst@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull intel drm fixes from Dave Airlie. * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: vlv: fix save/restore of GFX_MAX_REQ_COUNT reg drm/i915: Workaround to avoid lite restore with HEAD==TAIL drm/i915: cope with large i2c transfers
-
git://git.infradead.org/intel-iommuLinus Torvalds authored
Pull intel iommu updates from David Woodhouse: "This lays a little of the groundwork for upcoming Shared Virtual Memory support — fixing some bogus #defines for capability bits and adding the new ones, and starting to use the new wider page tables where we can, in anticipation of actually filling in the new fields therein. It also allows graphics devices to be assigned to VM guests again. This got broken in 3.17 by disallowing assignment of RMRR-afflicted devices. Like USB, we do understand why there's an RMRR for graphics devices — and unlike USB, it's actually sane. So we can make an exception for graphics devices, just as we do USB controllers. Finally, tone down the warning about the X2APIC_OPT_OUT bit, due to persistent requests. X2APIC_OPT_OUT was added to the spec as a nasty hack to allow broken BIOSes to forbid us from using X2APIC when they do stupid and invasive things and would break if we did. Someone noticed that since Windows doesn't have full IOMMU support for DMA protection, setting the X2APIC_OPT_OUT bit made Windows avoid initialising the IOMMU on the graphics unit altogether. This means that it would be available for use in "driver mode", where the IOMMU registers are made available through a BAR of the graphics device and the graphics driver can do SVM all for itself. So they started setting the X2APIC_OPT_OUT bit on *all* platforms with SVM capabilities. And even the platforms which *might*, if the planets had been aligned correctly, possibly have had SVM capability but which in practice actually don't" * git://git.infradead.org/intel-iommu: iommu/vt-d: support extended root and context entries iommu/vt-d: Add new extended capabilities from v2.3 VT-d specification iommu/vt-d: Allow RMRR on graphics devices too iommu/vt-d: Print x2apic opt out info instead of printing a warning iommu/vt-d: kill bogus ecap_niotlb_iunits()
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "This has a mixture of merge window cleanups and bugfixes" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: st: add include for pinctrl i2c: mux: use proper dev when removing "channel-X" symlinks i2c: digicolor: remove duplicate include i2c: Mark adapter devices with pm_runtime_no_callbacks i2c: pca-platform: fix broken email address i2c: mxs: fix broken email address i2c: rk3x: report number of messages transmitted
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "Filipe hit two problems in my block group cache patches. We finalized the fixes last week and ran through more tests" * 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: prevent list corruption during free space cache processing Btrfs: fix inode cache writeout
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2015-04-25' of git://anongit.freedesktop.org/drm-intel into drm-fixes three fixes for i915. * tag 'drm-intel-next-fixes-2015-04-25' of git://anongit.freedesktop.org/drm-intel: drm/i915: vlv: fix save/restore of GFX_MAX_REQ_COUNT reg drm/i915: Workaround to avoid lite restore with HEAD==TAIL drm/i915: cope with large i2c transfers
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client updates from Trond Myklebust: "Another set of mainly bugfixes and a couple of cleanups. No new functionality in this round. Highlights include: Stable patches: - Fix a regression in /proc/self/mountstats - Fix the pNFS flexfiles O_DIRECT support - Fix high load average due to callback thread sleeping Bugfixes: - Various patches to fix the pNFS layoutcommit support - Do not cache pNFS deviceids unless server notifications are enabled - Fix a SUNRPC transport reconnection regression - make debugfs file creation failure non-fatal in SUNRPC - Another fix for circular directory warnings on NFSv4 "junctioned" mountpoints - Fix locking around NFSv4.2 fallocate() support - Truncating NFSv4 file opens should also sync O_DIRECT writes - Prevent infinite loop in rpcrdma_ep_create() Features: - Various improvements to the RDMA transport code's handling of memory registration - Various code cleanups" * tag 'nfs-for-4.1-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (55 commits) fs/nfs: fix new compiler warning about boolean in switch nfs: Remove unneeded casts in nfs NFS: Don't attempt to decode missing directory entries Revert "nfs: replace nfs_add_stats with nfs_inc_stats when add one" NFS: Rename idmap.c to nfs4idmap.c NFS: Move nfs_idmap.h into fs/nfs/ NFS: Remove CONFIG_NFS_V4 checks from nfs_idmap.h NFS: Add a stub for GETDEVICELIST nfs: remove WARN_ON_ONCE from nfs_direct_good_bytes nfs: fix DIO good bytes calculation nfs: Fetch MOUNTED_ON_FILEID when updating an inode sunrpc: make debugfs file creation failure non-fatal nfs: fix high load average due to callback thread sleeping NFS: Reduce time spent holding the i_mutex during fallocate() NFS: Don't zap caches on fallocate() xprtrdma: Make rpcrdma_{un}map_one() into inline functions xprtrdma: Handle non-SEND completions via a callout xprtrdma: Add "open" memreg op xprtrdma: Add "destroy MRs" memreg op xprtrdma: Add "reset MRs" memreg op ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull fourth vfs update from Al Viro: "d_inode() annotations from David Howells (sat in for-next since before the beginning of merge window) + four assorted fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: RCU pathwalk breakage when running into a symlink overmounting something fix I_DIO_WAKEUP definition direct-io: only inc/dec inode->i_dio_count for file systems fs/9p: fix readdir() VFS: assorted d_backing_inode() annotations VFS: fs/inode.c helpers: d_inode() annotations VFS: fs/cachefiles: d_backing_inode() annotations VFS: fs library helpers: d_inode() annotations VFS: assorted weird filesystems: d_inode() annotations VFS: normal filesystems (and lustre): d_inode() annotations VFS: security/: d_inode() annotations VFS: security/: d_backing_inode() annotations VFS: net/: d_inode() annotations VFS: net/unix: d_backing_inode() annotations VFS: kernel/: d_inode() annotations VFS: audit: d_backing_inode() annotations VFS: Fix up some ->d_inode accesses in the chelsio driver VFS: Cachefiles should perform fs modifications on the top layer only VFS: AF_UNIX sockets should call mknod on the top layer only
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull more power management and ACPI updates from Rafael Wysocki: "These are fixes mostly (intel_pstate, ACPI core, ACPI EC driver, cpupower tool), a new CPU ID for the Intel RAPL driver and one intel_pstate driver improvement that didn't make it to my previous pull requests due to timing. Specifics: - Fix a build warning in the intel_pstate driver showing up in non-SMP builds (Borislav Petkov) - Change one of the intel_pstate's P-state selection parameters for Baytrail and Cherrytrail CPUs to significantly improve performance at the cost of a small increase in energy consumption (Kristen Carlson Accardi) - Fix a NULL pointer dereference in the ACPI EC driver due to an unsafe list walk in the query handler removal routine (Chris Bainbridge) - Get rid of a false-positive lockdep warning in the ACPI container hot-remove code (Rafael J Wysocki) - Prevent the ACPI device enumeration code from creating device objects of a wrong type in some cases (Rafael J Wysocki) - Add Skylake processors support to the Intel RAPL power capping driver (Brian Bian) - Drop the stale MAINTAINERS entry for the ACPI dock driver that is regarded as part of the ACPI core and maintained along with it now (Chao Yu) - Fix cpupower tool breakage caused by a library API change in libpci 3.3.0 (Lucas Stach)" * tag 'pm+acpi-4.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / scan: Add a scan handler for PRP0001 ACPI / scan: Annotate physical_node_lock in acpi_scan_is_offline() ACPI / EC: fix NULL pointer dereference in acpi_ec_remove_query_handler() MAINTAINERS: remove maintainship entry of docking station driver powercap / RAPL: Add support for Intel Skylake processors cpufreq: intel_pstate: Fix an annoying !CONFIG_SMP warning intel_pstate: Change the setpoint for Atom params cpupower: fix breakage from libpci API change
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: "This push fixes a build problem with img-hash under non-standard configurations and a serious regression with sha512_ssse3 which can lead to boot failures" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: img-hash - CRYPTO_DEV_IMGTEC_HASH should depend on HAS_DMA crypto: x86/sha512_ssse3 - fixup for asm function prototype change
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v4.1-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform driver updates from Darren Hart: "This series includes significant updates to the toshiba_acpi driver and the reintroduction of the dell-laptop keyboard backlight additions I had to revert previously. Also included are various fixes for typos, warnings, correctness, and minor bugs. Specifics: dell-laptop: - add support for keyboard backlight. toshiba_acpi: - adaptive keyboard, hotkey, USB sleep and charge, and backlight updates. Update sysfs documentation. toshiba_bluetooth: - fix enabling/disabling loop on recent devices apple-gmux: - lock iGP IO to protect from vgaarb changes other: - Fix typos, clear gcc warnings, clarify pr_* messages, correct return types, update MAINTAINERS" * tag 'platform-drivers-x86-v4.1-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (25 commits) toshiba_acpi: Do not register vendor backlight when acpi_video bl is available MAINTAINERS: Add me on list of Dell laptop drivers platform: x86: dell-laptop: Add support for keyboard backlight Documentation/ABI: Update sysfs-driver-toshiba_acpi entry toshiba_acpi: Fix pr_* messages from USB Sleep Functions toshiba_acpi: Update and fix USB Sleep and Charge modes wmi: Use bool function return values of true/false not 1/0 toshiba_bluetooth: Fix enabling/disabling loop on recent devices toshiba_bluetooth: Clean up *_add function and disable BT device at removal toshiba_bluetooth: Add three new functions to the driver toshiba_acpi: Fix the enabling of the Special Functions toshiba_acpi: Use the Hotkey Event Type function for keymap choosing toshiba_acpi: Add Hotkey Event Type function and definitions x86/wmi: delete unused wmi_data_lock mutex causing gcc warning apple-gmux: lock iGP IO to protect from vgaarb changes MAINTAINERS: Add missing Toshiba devices and add myself as maintainer toshiba_acpi: Update events in toshiba_acpi_notify intel-oaktrail: Fix trivial typo in comment thinkpad_acpi: off by one in adaptive_keyboard_hotkey_notify_hotkey() thinkpad_acpi: signedness bugs getting current_mode ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platformLinus Torvalds authored
Pull chrome platform updates from Olof Johansson: "Here's a set of updates to the Chrome OS platform drivers for this merge window. Main new things this cycle is: - Driver changes to expose the lightbar to users. With this, you can make your own blinkenlights on Chromebook Pixels. - Changes in the way that the atmel_mxt trackpads are probed. The laptop driver is trying to be smart and not instantiate the devices that don't answer to probe. For the trackpad that can come up in two modes (bootloader or regular), this gets complicated since the driver already knows how to handle the two modes including the actual addresses used. So now the laptop driver needs to know more too, instantiating the regular address even if the bootloader one is the probe that passed. - mfd driver improvements by Javier Martines Canillas, and a few bugfixes from him, kbuild and myself" * tag 'chrome-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform: platform/chrome: chromeos_laptop - instantiate Atmel at primary address platform/chrome: cros_ec_lpc - Depend on X86 || COMPILE_TEST platform/chrome: cros_ec_lpc - Include linux/io.h header file platform/chrome: fix platform_no_drv_owner.cocci warnings platform/chrome: cros_ec_lightbar - fix duplicate const warning platform/chrome: cros_ec_dev - fix Unknown escape '%' warning platform/chrome: Expose Chrome OS Lightbar to users platform/chrome: Create sysfs attributes for the ChromeOS EC mfd: cros_ec: Instantiate ChromeOS EC character device platform/chrome: Add Chrome OS EC userspace device interface platform/chrome: Add cros_ec_lpc driver for x86 devices mfd: cros_ec: Add char dev and virtual dev pointers mfd: cros_ec: Use fixed size arrays to transfer data with the EC
-
git://git.kernel.org/pub/scm/linux/kernel/git/jesper/crisLinus Torvalds authored
Pull arch/cris updates from Jesper Nilsson: "Some much needed love for the CRIS-port. There's a bunch of changes this time, giving the CRISv32 port a bit of modern makeover with device-tree, irq domain and gpiolib support, and more switchover to generic frameworks. Some small fixes and removal of the theoretical SMP support brings up the rear" * tag 'cris-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris: cris: fix integer overflow in ELF_ET_DYN_BASE CRISv32: use GENERIC_SCHED_CLOCK CRISv32: use MMIO clocksource CRISv32: use generic clockevents CRIS: use generic headers via Kbuild CRIS: use generic cmpxchg.h CRIS: use generic atomic.h CRIS: use generic atomic bitops CRISv10: remove redundant macros from system.h CRIS: remove SMP code CRISv32: don't enable irqs in INIT_THREAD CRISv32: handle multiple signals CRISv32: prevent bogus restarts on sigreturn CRISv32: don't attempt syscall restart on irq exit Add binding documentation for CRIS CRIS: add Axis 88 board device tree CRISv32: add device tree support CRISv32: add irq domains support CRIS: enable GPIOLIB
-
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - fix for mm_dec_nr_pmds() from Scott. - fixes for oopses seen with KVM + THP from Aneesh. - build fixes from Aneesh & Shreyas. * tag 'powerpc-4.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc/mm: Fix build error with CONFIG_PPC_TRANSACTIONAL_MEM disabled powerpc/kvm: Fix ppc64_defconfig + PPC_POWERNV=n build error powerpc/mm/thp: Return pte address if we find trans_splitting. powerpc/mm/thp: Make page table walk safe against thp split/collapse KVM: PPC: Remove page table walk helpers KVM: PPC: Use READ_ONCE when dereferencing pte_t pointer powerpc/hugetlb: Call mm_dec_nr_pmds() in hugetlb_free_pmd_range()
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull second batch of KVM changes from Paolo Bonzini: "This mostly includes the PPC changes for 4.1, which this time cover Book3S HV only (debugging aids, minor performance improvements and some cleanups). But there are also bug fixes and small cleanups for ARM, x86 and s390. The task_migration_notifier revert and real fix is still pending review, but I'll send it as soon as possible after -rc1" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (29 commits) KVM: arm/arm64: check IRQ number on userland injection KVM: arm: irqfd: fix value returned by kvm_irq_map_gsi KVM: VMX: Preserve host CR4.MCE value while in guest mode. KVM: PPC: Book3S HV: Use msgsnd for signalling threads on POWER8 KVM: PPC: Book3S HV: Translate kvmhv_commence_exit to C KVM: PPC: Book3S HV: Streamline guest entry and exit KVM: PPC: Book3S HV: Use bitmap of active threads rather than count KVM: PPC: Book3S HV: Use decrementer to wake napping threads KVM: PPC: Book3S HV: Don't wake thread with no vcpu on guest IPI KVM: PPC: Book3S HV: Get rid of vcore nap_count and n_woken KVM: PPC: Book3S HV: Move vcore preemption point up into kvmppc_run_vcpu KVM: PPC: Book3S HV: Minor cleanups KVM: PPC: Book3S HV: Simplify handling of VCPUs that need a VPA update KVM: PPC: Book3S HV: Accumulate timing information for real-mode code KVM: PPC: Book3S HV: Create debugfs file for each guest's HPT KVM: PPC: Book3S HV: Add ICP real mode counters KVM: PPC: Book3S HV: Move virtual mode ICP functions to real-mode KVM: PPC: Book3S HV: Convert ICS mutex lock to spin lock KVM: PPC: Book3S HV: Add guest->host real mode completion counters KVM: PPC: Book3S HV: Add helpers for lock/unlock hpte ...
-
Stephen Rothwell authored
Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- Apr 25, 2015
-
-
Dmitry Torokhov authored
The new Atmel MXT driver expects i2c client's address contain the primary (main address) of the chip, and calculates the expected bootloader address form the primary address. Unfortunately chrome_laptop does probe the devices and if touchpad (or touchscreen, or both) comes up in bootloader mode the i2c device gets instantiated with the bootloader address which confuses the driver. To work around this issue let's probe the primary address first. If the device is not detected at the primary address we'll probe alternative addresses as "dummy" devices. If any of them are found, destroy the dummy client and instantiate client with proper name at primary address still. Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Al Viro authored
Calling unlazy_walk() in walk_component() and do_last() when we find a symlink that needs to be followed doesn't acquire a reference to vfsmount. That's fine when the symlink is on the same vfsmount as the parent directory (which is almost always the case), but it's not always true - one _can_ manage to bind a symlink on top of something. And in such cases we end up with excessive mntput(). Cc: stable@vger.kernel.org # since 2.6.39 Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Eric Sandeen authored
I_DIO_WAKEUP is never directly used, but fix it up anyway. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Jens Axboe authored
do_blockdev_direct_IO() increments and decrements the inode ->i_dio_count for each IO operation. It does this to protect against truncate of a file. Block devices don't need this sort of protection. For a capable multiqueue setup, this atomic int is the only shared state between applications accessing the device for O_DIRECT, and it presents a scaling wall for that. In my testing, as much as 30% of system time is spent incrementing and decrementing this value. A mixed read/write workload improved from ~2.5M IOPS to ~9.6M IOPS, with better latencies too. Before: clat percentiles (usec): | 1.00th=[ 33], 5.00th=[ 34], 10.00th=[ 34], 20.00th=[ 34], | 30.00th=[ 34], 40.00th=[ 34], 50.00th=[ 35], 60.00th=[ 35], | 70.00th=[ 35], 80.00th=[ 35], 90.00th=[ 37], 95.00th=[ 80], | 99.00th=[ 98], 99.50th=[ 151], 99.90th=[ 155], 99.95th=[ 155], | 99.99th=[ 165] After: clat percentiles (usec): | 1.00th=[ 95], 5.00th=[ 108], 10.00th=[ 129], 20.00th=[ 149], | 30.00th=[ 155], 40.00th=[ 161], 50.00th=[ 167], 60.00th=[ 171], | 70.00th=[ 177], 80.00th=[ 185], 90.00th=[ 201], 95.00th=[ 270], | 99.00th=[ 390], 99.50th=[ 398], 99.90th=[ 418], 99.95th=[ 422], | 99.99th=[ 438] In other setups, Robert Elliott reported seeing good performance improvements: https://lkml.org/lkml/2015/4/3/557 The more applications accessing the device, the worse it gets. Add a new direct-io flags, DIO_SKIP_DIO_COUNT, which tells do_blockdev_direct_IO() that it need not worry about incrementing or decrementing the inode i_dio_count for this caller. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Elliott, Robert (Server Storage) <elliott@hp.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Johannes Berg authored
Al Viro's IOV changes broke 9p readdir() because the new code didn't abort the read when it returned nothing. The original code checked if the combined error/length was <= 0 but in the new code that accidentally got changed to just an error check. Add back the return from the function when nothing is read. Cc: Al Viro <viro@zeniv.linux.org.uk> Fixes: e1200fe6 ("9p: switch p9_client_read() to passing struct iov_iter *") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Chris Mason authored
__btrfs_write_out_cache is holding the ctl->tree_lock while it prepares a list of bitmaps to record in the free space cache. It was dropping the lock while it worked on other components, which made a window for free_bitmap() to free the bitmap struct without removing it from the list. This changes things to hold the lock the whole time, and also makes sure we hold the lock during enospc cleanup. Reported-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
Chris Mason <clm@fb.com>
-
Hans de Goede authored
commit a39f46df ("toshiba_acpi: Fix regression caused by backlight extra check code") causes the backlight to no longer work on the Toshiba Z30, reverting that commit fixes this but restores the original issue fixed by that commit. Looking at the toshiba_acpi backlight code for a fix for this I noticed that the toshiba code is the only code under platform/x86 which unconditionally registers a vendor acpi backlight interface, without checking for acpi_video backlight support first. This commit adds the necessary checks bringing toshiba_acpi in line with the other drivers, and fixing the Z30 regression without needing to revert the commit causing it. Chances are that there will be some Toshiba models which have a non working acpi-video implementation while the toshiba vendor backlight interface does work, this commit adds an empty dmi_id table where such systems can be added, this is identical to how other drivers handle such systems. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1206036 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=86521 Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-and-tested-by:
Azael Avalos <coproscefalo@gmail.com> Signed-off-by:
Darren Hart <dvhart@linux.intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Here are a few fixes that have been pending since the previous pull request: a regression fix for HD-audio multiple SPDIF / HDMI devices, several ALC256 codec fixes, a couple of i915 HDMI audio fixes, and various small fixes. Nothing exciting, just boring, but things good to have" * tag 'sound-fix-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - fix headset mic detection problem for one more machine ALSA: hda/realtek - Fix Headphone Mic doesn't recording for ALC256 ALSA: hda - fix "num_steps = 0" error on ALC256 ALSA: usb-audio: Fix audio output on Roland SC-D70 sound module ALSA: hda - add AZX_DCAPS_I915_POWERWELL to Baytrail ALSA: hda - only sync BCLK to the display clock for Haswell & Broadwell ALSA: hda - Mute headphone pin on suspend on XPS13 9333 sound/oss: fix deadlock in sequencer_ioctl(SNDCTL_SEQ_OUTOFBAND) ALSA: asound.h - use SNDRV_CTL_ELEM_ID_NAME_MAXLEN ALSA: hda - potential (but unlikely) uninitialized variable ALSA: hda - Fix regression for slave SPDIF setups ALSA: intel8x0: Check pci_iomap() success for DEVICE_ALI ALSA: hda - simplify azx_has_pm_runtime
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target updates from Nicholas Bellinger: "Lots of activity in target land the last months. The highlights include: - Convert fabric drivers tree-wide to target_register_template() (hch + bart) - iser-target hardening fixes + v1.0 improvements (sagi) - Convert iscsi_thread_set usage to kthread.h + kill iscsi_target_tq.c (sagi + nab) - Add support for T10-PI WRITE_STRIP + READ_INSERT operation (mkp + sagi + nab) - DIF fixes for CONFIG_DEBUG_SG=y + UNMAP file emulation (akinobu + sagi + mkp) - Extended TCMU ABI v2 for future BIDI + DIF support (andy + ilias) - Fix COMPARE_AND_WRITE handling for NO_ALLLOC drivers (hch + nab) Thanks to everyone who contributed this round with new features, bug-reports, fixes, cleanups and improvements. Looking forward, it's currently shaping up to be a busy v4.2 as well" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (69 commits) target: Put TCMU under a new config option target: Version 2 of TCMU ABI target: fix tcm_mod_builder.py target/file: Fix UNMAP with DIF protection support target/file: Fix SG table for prot_buf initialization target/file: Fix BUG() when CONFIG_DEBUG_SG=y and DIF protection enabled target: Make core_tmr_abort_task() skip TMFs target/sbc: Update sbc_dif_generate pr_debug output target/sbc: Make internal DIF emulation honor ->prot_checks target/sbc: Return INVALID_CDB_FIELD if DIF + sess_prot_type disabled target: Ensure sess_prot_type is saved across session restart target/rd: Don't pass incomplete scatterlist entries to sbc_dif_verify_* target: Remove the unused flag SCF_ACK_KREF target: Fix two sparse warnings target: Fix COMPARE_AND_WRITE with SG_TO_MEM_NOALLOC handling target: simplify the target template registration API target: simplify target_xcopy_init_pt_lun target: remove the unused SCF_CMD_XCOPY_PASSTHROUGH flag target/rd: reduce code duplication in rd_execute_rw() tcm_loop: fixup tpgt string to integer conversion ...
-
Linus Torvalds authored
Merge tag 'pwm/for-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm changes from Thierry Reding: "Not much has been happening in PWM land lately, so this contains mostly minor fixes that didn't seem urgent enough for a late pull-request last cycle" * tag 'pwm/for-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: Remove __init initializer for pwm_add_table() pwm: samsung: Fix output race on disabling pwm: mxs: Fix period divider computation pwm: atmel-hlcdc: Add errata handling for sama5d4 pwm: pca9685: Constify struct regmap_config pwm: imx-pwm: add explicit compatible strings and required clock properties
-