Check with SCTP_ALL_ASSOC instead in sctp_setsockopt_maxburst and
check with SCTP_FUTURE_ASSOC instead in sctp_getsockopt_maxburst,
it's compatible with 0.

SCTP_CURRENT_ASSOC is supported for SCTP_CONTEXT in this patch.
It also adjusts some code to keep a same check form as other
functions.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Check with SCTP_ALL_ASSOC instead in sctp_setsockopt_context and
check with SCTP_FUTURE_ASSOC instead in sctp_getsockopt_context,
it's compatible with 0.

SCTP_CURRENT_ASSOC is supported for SCTP_CONTEXT in this patch.
It also adjusts some code to keep a same check form as other
functions.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Check with SCTP_ALL_ASSOC instead in sctp_setsockopt_default_sndinfo and
check with SCTP_FUTURE_ASSOC instead in sctp_getsockopt_default_sndinfo,
it's compatible with 0.

SCTP_CURRENT_ASSOC is supported for SCTP_DEFAULT_SNDINFO in this patch.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Check with SCTP_ALL_ASSOC instead in sctp_setsockopt_default_send_param and
check with SCTP_FUTURE_ASSOC instead in sctp_getsockopt_default_send_param,
it's compatible with 0.

SCTP_CURRENT_ASSOC is supported for SCTP_DEFAULT_SEND_PARAM in this patch.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Check with SCTP_ALL_ASSOC instead in sctp_setsockopt_delayed_ack and
check with SCTP_FUTURE_ASSOC instead in sctp_getsockopt_delayed_ack,
it's compatible with 0.

SCTP_CURRENT_ASSOC is supported for SCTP_DELAYED_SACK in this patch.

It also adds sctp_apply_asoc_delayed_ack() to make code more readable.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

SCTP_STREAM_SCHEDULER_VALUE is a special one, as its value is not
save in sctp_sock, but only in asoc. So only SCTP_CURRENT_ASSOC
reserved assoc_id can be used in sctp_setsockopt_scheduler_value.

This patch adds SCTP_CURRENT_ASOC support for
SCTP_STREAM_SCHEDULER_VALUE.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Check with SCTP_FUTURE_ASSOC instead in
sctp_set/getsockopt_reconfig_supported, it's compatible with 0.

It also adjusts some code to keep a same check form as other functions.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Check with SCTP_FUTURE_ASSOC instead in
sctp_set/getsockopt_reconfig_supported, it's compatible with 0.

It also adjusts some code to keep a same check form as other functions.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Check with SCTP_FUTURE_ASSOC instead in
sctp_set/getsockopt_pr_supported, it's compatible with 0.

It also adjusts some code to keep a same check form as other functions.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Check with SCTP_FUTURE_ASSOC instead in
sctp_set/getsockopt_paddr_thresholds, it's compatible with 0.

It also adds pf_retrans in sctp_sock to support SCTP_FUTURE_ASSOC.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Check with SCTP_FUTURE_ASSOC instead in
sctp_getsockopt_local_auth_chunks, it's compatible with 0.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Check with SCTP_FUTURE_ASSOC instead in
sctp_set/getsockopt_maxseg, it's compatible with 0.
Also check asoc_id early as other sctp setsockopts does.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Check with SCTP_FUTURE_ASSOC instead in
sctp_set/getsockopt_associnfo, it's compatible with 0.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Check with SCTP_FUTURE_ASSOC instead in
sctp_set/getsockopt_rtoinfo, it's compatible with 0.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Check with SCTP_FUTURE_ASSOC instead in
sctp_/setgetsockopt_peer_addr_params, it's compatible with 0.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to add 3 constants SCTP_FUTURE_ASSOC,
SCTP_CURRENT_ASSOC and SCTP_ALL_ASSOC for reserved
assoc_ids, as defined in rfc6458#section-7.2.

And add the process for them when doing lookup and
inserting in sctp_id2assoc and sctp_assoc_set_id.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vasundhara Volam says:

====================
devlink: Add configuration parameters support for devlink_port

This patchset adds support for configuration parameters setting through
devlink_port.  Each device registers supported configuration parameters
table.

The user can retrieve data on these parameters by
"devlink port param show" command and can set new value to a
parameter by "devlink port param set" command.
All configuration modes supported by devlink_dev are supported
by devlink_port also.

Command examples and output:

pci/0000:3b:00.0/0:
  name wake-on-lan type generic
    values:
      cmode permanent value false

pci/0000:3b:00.1/1:
  name wake-on-lan type generic
    values:
      cmode permanent value false

pci/0000:af:00.0/0:
  name wake-on-lan type generic
    values:
      cmode permanent value true

pci/0000:3b:00.0/0:
  name wake-on-lan type generic
    values:
      cmode permanent value false

There is difference of opinion on adding WOL parameter to devlink, between
Jakub Kicinski and Michael Chan.

Quote from Jakud Kicinski:
********
As explained previously I think it's a very bad idea to add existing
configuration options to devlink, just because devlink has the ability
to persist the setting in NVM.  Especially that for WoL you have to get
the link up so you potentially have all link config stuff as well.  And
that n-tuple filters are one of the WoL options, meaning we'd need the
ability to persist n-tuple filters via devlink.

The effort would be far better spent helping with migrating ethtool to
netlink, and allowing persisting there.

I have not heard any reason why devlink is a better fit.  I can imagine
you're just doing it here because it's less effort for you since
ethtool is not yet migrated.
********

Quote from Michael Chan:
********
The devlink's WoL parameter is a persistent WoL parameter stored in the
NIC's NVRAM. It is different from ethtool's WoL parameter in a number of
ways. ethtool WoL is not persistent over AC power cycle and is considered
OS-present WoL. As such, ethtool WoL can use a more sophisticated pattern
including n-tuple with IP address in addition to the more basic types
(e.g. magic packet). Whereas OS-absent power up WoL should only include
magic packet and other simple types. The devlink WoL setting does not have
to match the ethtool WoL setting. The card will autoneg up to the speed
supported by Vaux so no special devlink link setting is needed.
********

Future expansion of WOL parameter to devlink:
********
Add an additional flag to support additional setting to address link settings.
This will allow attributes to support both runtime and persistent
configuration.
********

v7->v8:
* Re-ordered function definitions.
* Append with "Acked-by: Jiri Pirko <jiri@mellanox.com>" to first 3 patches.
* Add missing devlink_port_param_driverinit_value_get() declaration.

v6->v7:
* Remove RFC tag from the patch-set.

v5->v6:
* Replace '-' with '*' in cover letter to avoid cutoff by git.

v4->v5:
* Added quotes from Jakub Kicinski and Michael chan on devlink's WOL
  parameter in the cover letter.

v3->v4:
* Update changes done from v2 to v3 version in individual patch
  descriptions.

v2->v3:
Make following changes as per suggestions from Jiri Pirko and
Michal Kubecek.
* Add a helper __devlink_params_register() with common code used by
  both devlink_params_register() and devlink_port_params_register().
* Define only WOL types used now and define them as bitfield, so that
  mutliple WOL types can be enabled upon power on.
* Modify "wake-on-lan" name to "wake_on_lan" to be symmetric with
  previous definitions.
* Rename DEVLINK_PARAM_WOL_XXX to DEVLINK_PARAM_WAKE_XXX to be
  symmetrical with ethtool WOL definitions.
* Modify bnxt_dl_wol_validate(), to throw error message when user gives
  value other than DEVLINK_PARAM_WAKE_MAGIC or to disable WOL.
* Use netdev_err() instead of netdev_warn(), when devlink_port_register()
  and devlink_port_params_register() returns error. Also, don't log rc
  in this message.

v1->v2:
Make following changes as per suggestions from Jiri Pirko.
* Remove separate enum devlink_port_param_generic_id for port params.
  Instead club it with existing device params. Accordingly refactor
  remaining patchset.
* Move INIT_LIST_HEAD of port param_list to devlink_port_register()
* Add a helper devlink_param_verify() to be used for both
  devlink_params_register() and devlink_port_params_register().
* Add a helper __devlink_params_unregister() for common code in
  devlink_params_unregister() and devlink_port_params_unregister().
* Move DEVLINK_CMD_PORT_PARAM_XXX definitions to the end of the enum.
* Split the patches for devlink_port_param_driverinit_value_get() and
  devlink_port_param_driverinit_value_set() into separate patches.
* define DEVLINK_PARAM_GENERIC_ID_WOL type as u8 and define enum for
  different types of WOL. Accordingly modify bnxt_en patch to validate
  wol type.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Register devlink_port with devlink and create initial port params
table for bnxt_en. The table consists of a generic parameter:

wake_on_lan: Enables Wake on Lan for this port when magic packet
is received with this port's MAC address using ACPI pattern.
If enabled, the controller asserts a wake pin upon reception of
WoL packet.  ACPI (Advanced Configuration and Power Interface) is
an industry specification for the efficient handling of power
consumption in desktop and mobile computers.

v2->v3:
- Modify bnxt_dl_wol_validate(), to throw error message when user gives
  value other than DEVLINK_PARAM_WAKE_MAGIC ot to disable WOL.
- Use netdev_err() instead of netdev_warn(), when devlink_port_register()
  and devlink_port_params_register() returns error. Also, don't log rc
  in this message.

Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

wake_on_lan - Enables Wake on Lan for this port. If enabled,
the controller asserts a wake pin based on the WOL type.

v2->v3:
- Define only WOL types used now and define them as bitfield, so that
  mutliple WOL types can be enabled upon power on.
- Modify "wake-on-lan" name to "wake_on_lan" to be symmetric with
  previous definitions.
- Rename DEVLINK_PARAM_WOL_XXX to DEVLINK_PARAM_WAKE_XXX to be
  symmetrical with ethtool WOL definitions.

Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add notification call for devlink port param set, register and unregister
functions.
Add devlink_port_param_value_changed() function to enable the driver notify
devlink on value change. Driver should use this function after value was
changed on any configuration mode part to driverinit.

v7->v8:
Order devlink_port_param_value_changed() definitions followed by
devlink_param_value_changed()

Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for "driverinit" configuration mode value for devlink_port
configuration parameters. Add devlink_port_param_driverinit_value_set()
function to help the driver set the value to devlink_port.

Also, move the common code to __devlink_param_driverinit_value_set()
to be used by both device and port params.

v7->v8:
Re-order the definitions as follows:
__devlink_param_driverinit_value_get
__devlink_param_driverinit_value_set
devlink_param_driverinit_value_get
devlink_param_driverinit_value_set
devlink_port_param_driverinit_value_get
devlink_port_param_driverinit_value_set

Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for "driverinit" configuration mode value for devlink_port
configuration parameters. Add devlink_port_param_driverinit_value_get()
function to help the driver get the value from devlink_port.

Also, move the common code to __devlink_param_driverinit_value_get()
to be used by both device and port params.

v7->v8:
-Add the missing devlink_port_param_driverinit_value_get() declaration.
-Also, order devlink_port_param_driverinit_value_get() after
devlink_param_driverinit_value_get/set() calls

Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add port param set command to set the value for a parameter.
Value can be set to any of the supported configuration modes.

v7->v8: Append "Acked-by: Jiri Pirko <jiri@mellanox.com>"

Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add port param get command which gets data per parameter.
It also has option to dump the parameters data per port.

v7->v8: Append "Acked-by: Jiri Pirko <jiri@mellanox.com>"

Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add functions to register and unregister for the driver supported
configuration parameters table per port.

v7->v8:
- Order the definitions following way as suggested by Jiri.
__devlink_params_register
__devlink_params_unregister
devlink_params_register
devlink_params_unregister
devlink_port_params_register
devlink_port_params_unregister
- Append with Acked-by: Jiri Pirko <jiri@mellanox.com&gt;.>

v2->v3:
- Add a helper __devlink_params_register() with common code used by
  both devlink_params_register() and devlink_port_params_register().

Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Need to save away the IV across tls async operations, from Dave
    Watson.

 2) Upon successful packet processing, we should liberate the SKB with
    dev_consume_skb{_irq}(). From Yang Wei.

 3) Only apply RX hang workaround on effected macb chips, from Harini
    Katakam.

 4) Dummy netdev need a proper namespace assigned to them, from Josh
    Elsasser.

 5) Some paths of nft_compat run lockless now, and thus we need to use a
    proper refcnt_t. From Florian Westphal.

 6) Avoid deadlock in mlx5 by doing IRQ locking, from Moni Shoua.

 7) netrom does not refcount sockets properly wrt. timers, fix that by
    using the sock timer API. From Cong Wang.

 8) Fix locking of inexact inserts of xfrm policies, from Florian
    Westphal.

 9) Missing xfrm hash generation bump, also from Florian.

10) Missing of_node_put() in hns driver, from Yonglong Liu.

11) Fix DN_IFREQ_SIZE, from Johannes Berg.

12) ip6mr notifier is invoked during traversal of wrong table, from Nir
    Dotan.

13) TX promisc settings not performed correctly in qed, from Manish
    Chopra.

14) Fix OOB access in vhost, from Jason Wang.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
  MAINTAINERS: Add entry for XDP (eXpress Data Path)
  net: set default network namespace in init_dummy_netdev()
  net: b44: replace dev_kfree_skb_xxx by dev_consume_skb_xxx for drop profiles
  net: caif: call dev_consume_skb_any when skb xmit done
  net: 8139cp: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: macb: Apply RXUBR workaround only to versions with errata
  net: ti: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: apple: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  net: amd8111e: replace dev_kfree_skb_irq by dev_consume_skb_irq
  net: alteon: replace dev_kfree_skb_irq by dev_consume_skb_irq
  net: tls: Fix deadlock in free_resources tx
  net: tls: Save iv in tls_rec for async crypto requests
  vhost: fix OOB in get_rx_bufs()
  qed: Fix stack out of bounds bug
  qed: Fix system crash in ll2 xmit
  qed: Fix VF probe failure while FLR
  qed: Fix LACP pdu drops for VFs
  qed: Fix bug in tx promiscuous mode settings
  net: i825xx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
  netfilter: ipt_CLUSTERIP: fix warning unused variable cn
  ...

Add multiple people as maintainers for XDP, sorted alphabetically.

XDP is also tied to driver level support and code, but we cannot add all
drivers to the list. Instead K: and N: match on 'xdp' in hope to catch some
of those changes in drivers.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Assign a default net namespace to netdevs created by init_dummy_netdev().
Fixes a NULL pointer dereference caused by busy-polling a socket bound to
an iwlwifi wireless device, which bumps the per-net BUSYPOLLRXPACKETS stat
if napi_poll() received packets:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000190
  IP: napi_busy_loop+0xd6/0x200
  Call Trace:
    sock_poll+0x5e/0x80
    do_sys_poll+0x324/0x5a0
    SyS_poll+0x6c/0xf0
    do_syscall_64+0x6b/0x1f0
    entry_SYSCALL_64_after_hwframe+0x3d/0xa2

Fixes: 7db6b048

 ("net: Commonize busy polling code to focus on napi_id instead of socket")
Signed-off-by: Josh Elsasser <jelsasser@appneta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

One of the more common cases of allocation size calculations is finding the
size of a structure that has a zero-sized array at the end, along with memory
for some number of elements for that array. For example:

struct foo {
    int stuff;
    struct boo entry[];
};

instance = kvzalloc(sizeof(struct foo) + count * sizeof(struct boo), GFP_KERNEL);

Instead of leaving these open-coded and prone to type mistakes, we can now
use the new struct_size() helper:

instance = kvzalloc(struct_size(instance, entry, count), GFP_KERNEL);

This code was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

One of the more common cases of allocation size calculations is finding the
size of a structure that has a zero-sized array at the end, along with memory
for some number of elements for that array. For example:

struct foo {
    int stuff;
    struct boo entry[];
};

instance = kvzalloc(sizeof(struct foo) + count * sizeof(struct boo), GFP_KERNEL);

Instead of leaving these open-coded and prone to type mistakes, we can now
use the new struct_size() helper:

instance = kvzalloc(struct_size(instance, entry, count), GFP_KERNEL);

This code was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The skb should be freed by dev_consume_skb_any() in b44_start_xmit()
when bounce_skb is used. The skb is be replaced by bounce_skb, so the
original skb should be consumed(not drop).

dev_consume_skb_irq() should be called in b44_tx() when skb xmit
done. It makes drop profiles(dropwatch, perf) more friendly.

Signed-off-by: Yang Wei <yang.wei9@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

The skb shouled be consumed when xmit done, it makes drop profiles
(dropwatch, perf) more friendly.
dev_kfree_skb_irq()/kfree_skb() shouled be replaced by
dev_consume_skb_any(), it makes code cleaner.

Signed-off-by: Yang Wei <yang.wei9@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

dev_consume_skb_irq() should be called in cp_tx() when skb xmit
done. It makes drop profiles(dropwatch, perf) more friendly.

Signed-off-by: Yang Wei <yang.wei9@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vishal Kulkarni will be the new maintainer for Chelsio cxgb3/cxgb4
drivers.

Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It's possible that the basic port information could have
changed since we first read it.

Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The interrupt handler contains a workaround for RX hang applicable
to Zynq and AT91RM9200 only. Subsequent versions do not need this
workaround. This workaround unnecessarily resets RX whenever RX used
bit read is observed, which can be often under heavy traffic. There
is no other action performed on RX UBR interrupt. Hence introduce a
CAPS mask; enable this interrupt and workaround only on affected
versions.

Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixed the code that was incorrectly interpreting the rx checksum validation
status from hardware, and updating kernel that the packet arrived with
correct checksum though the packet arrived with incorrect checksum and
hardware also indicated checksum is not correct.

Signed-off-by: Veerasenareddy Burru <vburru@marvell.com>
Acked-by: Derek Chickles <dchickles@marvell.com>
Signed-off-by: Felix Manlunas <fmanlunas@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dev_consume_skb_irq() should be called in cpmac_end_xmit() when
xmit done. It makes drop profiles more friendly.

Signed-off-by: Yang Wei <yang.wei9@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

dev_consume_skb_irq() should be called in bmac_txdma_intr() when
xmit done. It makes drop profiles more friendly.

Signed-off-by: Yang Wei <yang.wei9@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>