* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  MIPS: Fix HPAGE_SIZE redefinition

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: fix locking in xfs_iget_cache_hit

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  security: define round_hint_to_min in !CONFIG_SECURITY
  Security/SELinux: seperate lsm specific mmap_min_addr
  SELinux: call cap_file_mmap in selinux_file_mmap
  Capabilities: move cap_file_mmap to commoncap.c

The inotify_add_watch man page specifies that inotify_add_watch() will
return a non-negative integer.  However, historically the inotify
watches started at 1, not at 0.

Turns out that the inotifywait program provided by the inotify-tools
package doesn't properly handle a 0 watch descriptor.  In 7e790dd5 we
changed from starting at 1 to starting at 0.  This patch starts at 1,
just like in previous kernels, but also just like in previous kernels
it's possible for it to wrap back to 0.  This preserves the kernel
functionality exactly like it was before the patch (neither method broke
the spec)

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In f44aebcc the tail drop logic of events with no file backing
(q_overflow and in_ignored) was reversed so IN_IGNORED events would
never be tail dropped.  This now means that Q_OVERFLOW events are NOT
tail dropped.  The fix is to not tail drop IN_IGNORED, but to tail drop
Q_OVERFLOW.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

inotify decides if private data it passed to get added to an event was
used by checking list_empty().  But it's possible that the event may
have been dequeued and the private event removed so it would look empty.

The fix is to use the return code from fsnotify_add_notify_event rather
than looking at the list.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* master.kernel.org:/home/rmk/linux-2.6-arm: (37 commits)
  ARM: 5673/1: U300 fix initsection compile warning
  ARM: Fix broken highmem support
  mx31moboard: invert sdhc ro signal sense
  ARM: S3C24XX: Fix clkout mpx error
  ARM: S3C64XX: serial: Fix a typo in Kconfig
  IXP4xx: Fix IO_SPACE_LIMIT for 2.6.31-rc core PCI changes
  OMAP3: RX51: Updated rx51_defconfig
  OMAP2/3: mmc-twl4030: Free up MMC regulators while cleaning up
  OMAP3: RX51: Define TWL4030 USB transceiver in board file
  OMAP3: Overo: Fix smsc911x platform device resource value
  OMAP3: Fix omap3 sram virtual addres overlap vmalloc space after increasing vmalloc size
  OMAP2/3: DMA errata correction
  OMAP: Fix testing of cpu defines for mach-omap1
  OMAP3: Overo: add missing pen-down GPIO definition
  OMAP: GPIO: clear/restore level/edge detect settings on mask/unmask
  OMAP3: PM: Fix wrong sequence in suspend.
  OMAP: PM: CPUfreq: obey min/max settings of policy
  OMAP2/3/4: UART: allow in-order port traversal
  OMAP2/3/4: UART: Allow per-UART disabling wakeup for serial ports
  OMAP3: Fixed crash bug with serial + suspend
  ...

This patch fixes warnings like this:
  CC      fs/proc/meminfo.o
In file included from /work/linux/include/linux/mmzone.h:20,
                 from /work/linux/include/linux/gfp.h:4,
                 from /work/linux/include/linux/mm.h:8,
                 from /work/linux/fs/proc/meminfo.c:5:
/work/linux/arch/mips/include/asm/page.h:36:1: warning: "HPAGE_SIZE" redefined
In file included from /work/linux/fs/proc/meminfo.c:2:
/work/linux/include/linux/hugetlb.h:107:1: warning: this is the location of the previous definition

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The locking in xfs_iget_cache_hit currently has numerous problems:

 - we clear the reclaim tag without i_flags_lock which protects
   modifications to it
 - we call inode_init_always which can sleep with pag_ici_lock
   held (this is oss.sgi.com BZ #819)
 - we acquire and drop i_flags_lock a lot and thus provide no
   consistency between the various flags we set/clear under it

This patch fixes all that with a major revamp of the locking in
the function.  The new version acquires i_flags_lock early and
only drops it once we need to call into inode_init_always or before
calling xfs_ilock.

This patch fixes a bug seen in the wild where we race modifying the
reclaim tag.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Felix Blyakher <felixb@sgi.com>

Fix the header files to define round_hint_to_min() and to define
mmap_min_addr_handler() in the !CONFIG_SECURITY case.

Built and tested with !CONFIG_SECURITY

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>

Currently SELinux enforcement of controls on the ability to map low memory
is determined by the mmap_min_addr tunable.  This patch causes SELinux to
ignore the tunable and instead use a seperate Kconfig option specific to how
much space the LSM should protect.

The tunable will now only control the need for CAP_SYS_RAWIO and SELinux
permissions will always protect the amount of low memory designated by
CONFIG_LSM_MMAP_MIN_ADDR.

This allows users who need to disable the mmap_min_addr controls (usual reason
being they run WINE as a non-root user) to do so and still have SELinux
controls preventing confined domains (like a web server) from being able to
map some area of low memory.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>

Currently SELinux does not check CAP_SYS_RAWIO in the file_mmap hook.  This
means there is no DAC check on the ability to mmap low addresses in the
memory space.  This function adds the DAC check for CAP_SYS_RAWIO while
maintaining the selinux check on mmap_zero.  This means that processes
which need to mmap low memory will need CAP_SYS_RAWIO and mmap_zero but will
NOT need the SELinux sys_rawio capability.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>

Currently we duplicate the mmap_min_addr test in cap_file_mmap and in
security_file_mmap if !CONFIG_SECURITY.  This patch moves cap_file_mmap
into commoncap.c and then calls that function directly from
security_file_mmap ifndef CONFIG_SECURITY like all of the other capability
checks are done.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>

drivers/md/dm-log-userspace-transfer.c:110: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'size_t'

Previously posted and acked, but apparently lost.
http://lkml.indiana.edu/hypermail/linux/kernel/0906.2/02074.html



Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: dm-devel@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The triggered field of struct poll_wqueues introduced in commit
5f820f64 ("poll: allow f_op->poll to
sleep").

It was first set to 1 in pollwake() (now __pollwake() ), tested and
later set to 0 in poll_schedule_timeout(), but not initialized before.

As a result when the process needs to sleep, triggered was likely to be
non-zero even if pollwake() is not called before the first
poll_schedule_timeout(), meaning schedule_hrtimeout_range() would not be
called and an extra loop calling all ->poll() would be done.

This patch initialize triggered to 0 in poll_initwait() so the ->poll()
are not called twice before the process goes to sleep when it needs to.

Signed-off-by: Guillaume Knispel <gknispel@proformatique.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The u300_init_check_chip() function was not properly tagged with
the __init macro and provided a initsection mismatch on
compilation.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Currently, highmem is selectable, and you can request an increased
vmalloc area.  However, none of this has any effect on the memory
layout since a patch in the highmem series was accidentally dropped.
Moreover, even if you did want highmem, all memory would still be
registered as lowmem, possibly resulting in overflow of the available
virtual mapping space.

The highmem boundary is determined by the highest allowed beginning
of the vmalloc area, which depends on its configurable minimum size
(see commit 60296c71 for details on
this).

We should create mappings and initialize bootmem only for low memory,
while the zone allocator must still be told about highmem.

Currently, memory nodes which are completely located in high memory
are not supported.  This is not a huge limitation since systems
relying on highmem support are unlikely to have discontiguous memory
with large holes.

[ A similar patch was meant to be merged before commit 5f0fbf9e
  and be available  in Linux v2.6.30, however some git rebase screw-up
  of mine dropped the first commit of the series, and that goofage
  escaped testing somehow as well. -- Nico ]

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Nicolas Pitre <nico@marvell.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
  GFS2: Fix permissions on "recover" file

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (38 commits)
  V4L/DVB (12441): siano: read buffer overflow
  V4L/DVB (12440): Use kzalloc for frontend states to have struct dvb_frontend properly
  V4L/DVB (12438): Read buffer overflow
  V4L/DVB (12437): dvb: siano uses/depends on INPUT
  V4L/DVB (12436): stk-webcam: read buffer overflow
  V4L/DVB (12432): em28xx: fix regression in Empire DualTV digital tuning
  V4L/DVB (12429): v4l2-ioctl: fix G_STD and G_PARM default handlers
  V4L/DVB (12428): hdpvr: add missing initialization of current_norm
  V4L/DVB (12424): soc-camera: fix recursive locking in .buf_queue()
  V4L/DVB (12422): media/zr364xx: fix build errors
  V4L/DVB (12405): em28xx-cards: move register 0x13 setting to the proper place
  V4L/DVB (12411): em28xx: Fix artifacts with Silvercrest webcam
  V4L/DVB (12410): em28xx: Move the non-board dependent part to be outside em28xx_pre_card_setup()
  V4L/DVB (12407): em28xx: Adjust Silvercrest xtal frequency
  V4L/DVB (12406): em28xx: fix: don't do image interlacing on webcams
  V4L/DVB (12403): em28xx: properly reports some em2710 chips
  V4L/DVB (12402): em28xx: fix: some em2710 chips use a different vendor ID
  V4L/DVB (12401): m9v011: add vflip/hflip controls to control mirror/upside down
  V4L/DVB (12400): em28xx: Allow changing fps on webcams
  V4L/DVB (12399): mt9v011: Add support for controlling frame rates
  ...

Although this file is only ever written and not read by
userspace, it seems that the utils are opening this
file O_RDWR, so we need to allow that.

Also fixes the whitespace which seemed to be broken.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: David Teigland <teigland@redhat.com>

Small confusion with our hardware engineer, the WP signal (RO) is
active low on our boards, the signal has to inverted.

This is a pretty straightforward patch, it could even go to -rc,
but if not, then push it for 2.6.32.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Bug correction: CLK Outputs cannot have XTAL as parent

Signed-off-by: Davide Rizzo <elpa.rizzo@gmail.com>
[ben-linux@fluff.org: updated patch subject]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

The typo causes drivers/serial/s3c6400.c not being built for s3c6400 platform.

Signed-off-by: Ramax Lo <ramaxlo@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

With mode DEVICE_MODE_RAW_TUNER a read occurs past the end of smscore_fw_lkup[].
Subsequently an attempt is made to load the firmware from the resulting
filename.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

This patch changes most frontend drivers to allocate their state structure via
kzalloc and not kmalloc. This is done to properly initialize the
embedded "struct dvb_frontend frontend" field, that they all have.

The visible effect of this struct being uninitalized is, that the member "id"
that is used to set the name of kernel thread is totally random.

Some board drivers (for example cx88-dvb) set this "id" via
videobuf_dvb_alloc_frontend but most do not.

So I at least get random id values for saa7134, flexcop and ttpci based cards.
It looks like this in dmesg:
DVB: registering adapter 1 frontend -10551321 (ST STV0299 DVB-S)

The related kernel thread then also gets a strange name
like "kdvb-ad-1-fe--1".

Cc: Michael Krufky <mkrufky@linuxtv.org>
Cc: Steven Toth <stoth@linuxtv.org>
Cc: Timothy Lee <timothy.lee@siriushk.com>
Cc: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Acked-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

parport[n] is checked before n < MAX_CAMS

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

siano uses input_*() functions so it should depend on INPUT
to prevent build errors:

ERROR: "input_event" [drivers/media/dvb/siano/sms1xxx.ko] undefined!
ERROR: "input_register_device" [drivers/media/dvb/siano/sms1xxx.ko] undefined!
ERROR: "input_free_device" [drivers/media/dvb/siano/sms1xxx.ko] undefined!
ERROR: "input_unregister_device" [drivers/media/dvb/siano/sms1xxx.ko] undefined!
ERROR: "input_allocate_device" [drivers/media/dvb/siano/sms1xxx.ko] undefined!

Cc: Michael Krufky <mkrufky@linuxtv.org>
Cc: Uri Shkolnik <uris@siano-ms.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

It tested the value of stk_sizes[i].m before checking whether i was in range.

Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Restore support for digital tuning caused by regression during introduction
of disable_i2c_gate parameter to zl10353 driver.

Thanks to user "Xwang" for reporting the problem and testing the fix

Cc: Xwang <xwang1976@email.it>
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

The v4l core supplies default handlers for G_STD and G_PARM. However, both
default handlers are buggy.

This patch fixes the following:

1) If no g_std is supplied and current_norm == 0, then this driver does not
   support TV video standards (e.g. a radio or webcam driver). Return
   -EINVAL. This ensures that there is no bogus VIDIOC_G_STD support for
   such drivers.

2) The default VIDIOC_G_PARM handler used current_norm instead of first
   checking if the driver supported g_std and calling that to get the norm.
   It also didn't check if current_norm was 0, since in that case the driver
   does not support TV standards (or no standard was set at all) and the
   default handler should return -EINVAL.

Note that I am very unhappy with these default handlers: I think they
basically behave like some very strange and unexpected side-effect.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Drivers should either set current_norm or supply a g_std callback.

The hdpvr driver does neither. Since it initializes to a 60 Hz format
I've initialized the current_norm to NTSC | PAL_M | PAL_60 which is the
60 Hz subset of tvnorms.

Cc: Janne Grunau <j@jannau.net>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

The .buf_queue() V4L2 driver method is called under
spinlock_irqsave(q->irqlock,...), don't take the lock again inside the
function.

Reported-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Fix build errors in zr364xx by adding selects:

zr364xx.c:(.text+0x195ed7): undefined reference to `videobuf_streamon'
zr364xx.c:(.text+0x196030): undefined reference to `videobuf_dqbuf'
zr364xx.c:(.text+0x1960c4): undefined reference to `videobuf_qbuf'
zr364xx.c:(.text+0x196123): undefined reference to `videobuf_querybuf'
zr364xx.c:(.text+0x196182): undefined reference to `videobuf_reqbufs'
zr364xx.c:(.text+0x196224): undefined reference to `videobuf_queue_is_busy'
zr364xx.c:(.text+0x196390): undefined reference to `videobuf_vmalloc_free'
zr364xx.c:(.text+0x196571): undefined reference to `videobuf_iolock'
zr364xx.c:(.text+0x196678): undefined reference to `videobuf_mmap_mapper'
zr364xx.c:(.text+0x196760): undefined reference to `videobuf_poll_stream'
zr364xx.c:(.text+0x19689a): undefined reference to `videobuf_read_one'
zr364xx.c:(.text+0x1969ec): undefined reference to `videobuf_mmap_free'
zr364xx.c:(.text+0x197862): undefined reference to `videobuf_queue_vmalloc_init'
zr364xx.c:(.text+0x197a28): undefined reference to `videobuf_streamoff'
zr364xx.c:(.text+0x198203): undefined reference to `videobuf_to_vmalloc'
zr364xx.c:(.text+0x198603): undefined reference to `videobuf_streamoff'
drivers/built-in.o: In function `free_buffer':
zr364xx.c:(.text+0x19930c): undefined reference to `videobuf_vmalloc_free'
drivers/built-in.o: In function `zr364xx_open':
zr364xx.c:(.text+0x19a7de): undefined reference to `videobuf_queue_vmalloc_init'
drivers/built-in.o: In function `read_pipe_completion':
zr364xx.c:(.text+0x19b17f): undefined reference to `videobuf_to_vmalloc'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Register 0x13 seems to be a sort of image control, maybe gamma, white
level or black level. Lower values produce better images, while higher
values increases the contrast and shifts colors to green. 0xff produces
a black image. This register is not Silvercrest-specific, so its code
should be moved to a better place.

If this register is left alone, a random value can be found at the
register, producing weird results.

While here, let's remove register 0x0d, as it had no noticed effect at
the image.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Silvercrest mt9v011 sensor produces a 640x480 image. However,
previously, the code were getting only half of the lines and merging two
consecutive frames to "produce" a 640x480 image.

With the addition of progressive mode, now em28xx is working with a full
image. However, when the number of lines is bigger than 240, the
beginning of some odd lines are filled with blank.

After lots of testing, and physically checking the device for a Xtal, it
was noticed experimentally that mt9v011 is using em28xx XCLK as its
clock. Due to that, changing XCLK value changes the maximum speed of the
stream.

At the tests, it were possible to produce up to 32 fps, using a 30 MHz
XCLK. However, at that rate, the artifacts happen even at 320x240. Lower
values of XCLK produces artifacts only at 640x480.

At some values of xclk (for example XCLKK = 6 MHz, 640x480), it is
possible to see an invalid sucession of artifacts with this pattern:

.xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
..xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
...xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
....xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
.xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
..xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
...xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
....xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

(where the dots represent the blanked pixels)

So, it seems that a waveform in the format of a ramp is interferring at
the image.

The cause of this interference is currently unknown. Some possibilities
are:
	- electrical interference (maybe this device is broken?);
	- some issue at mt9v011 programming;
	- some bug at em28xx chip.

So, for now, let's be conservative and use a value of XCLK that we know
for sure that it won't cause artifacts.

As I'm waiting for more of such devices with different em28xx chipset
revisions, I'll have the opportunity to double check the issue with
other pieces of hardware.

Later patches can vary XCLK depending on the vertical resolutions, if a
proper fix is not discovered.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

em28xx_pre_card_setup() is meant to contain board-specific initialization. Also,
as autodetection sometimes occur only after having i2c bus enabled, this
function may need to be called later.

Moving those setups to happen outside the function avoids calling it twice without
need and without duplicating output lines at dmesg.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

We don't know the xtal frequency of Silvercrest, but we need to have
some value in order to allow controlling the frame rate frequency. The
value is probably still wrong, since the manufacturer announces this
device as being capable of 30fps, but the maximum we can get is
13.5 fps.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Due to historical reasons, em28xx driver gets two consecutive frames and
fold them into an unique framing, doing interlacing. While this works
fine for TV images, this produces two bad effects with webcams:

1) webcam images are progressive. Merging two consecutive images produce
interlacing artifacts on the image;

2) since the driver needs to get two frames, it reduces the maximum
frame rate by two.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>