- May 13, 2016
-
-
Jan Kara authored
When there are blocks to free in the running transaction, block allocator can return ENOSPC although the filesystem has some blocks to free. We use ext4_should_retry_alloc() to force commit of the current transaction and return whether anything was committed so that it makes sense to retry the allocation. However the transaction may get committed after block allocation fails but before we call ext4_should_retry_alloc(). So ext4_should_retry_alloc() returns false because there is nothing to commit and we wrongly return ENOSPC. Fix the race by unconditionally returning 1 from ext4_should_retry_alloc() when we tried to commit a transaction. This should not add any unnecessary retries since we had a transaction running a while ago when trying to allocate blocks and we want to retry the allocation once that transaction has committed anyway. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Jan Kara authored
ext4_dax_get_blocks() was accidentally omitted fixing get blocks handlers to properly handle transient ENOSPC errors. Fix it now to use ext4_get_blocks_trans() helper which takes care of these errors. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Jan Kara authored
Currently, __dax_fault() does not call get_blocks() callback with create argument set, when we got back unwritten extent from the initial get_blocks() call during a write fault. This is because originally filesystems were supposed to convert unwritten extents to written ones using complete_unwritten() callback. Later this was abandoned in favor of using pre-zeroed blocks however the condition whether get_blocks() needs to be called with create == 1 remained. Fix the condition so that filesystems are not forced to zero-out and convert unwritten extents when get_blocks() is called with create == 0 (which introduces unnecessary overhead for read faults and can be problematic as the filesystem may possibly be read-only). Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
- May 06, 2016
-
-
Nicolai Stange authored
ext4_find_extent(), stripped down to the parts relevant to this patch, reads as ppos = 0; i = depth; while (i) { --i; ++ppos; if (unlikely(ppos > depth)) { ... ret = -EFSCORRUPTED; goto err; } } Due to the loop's bounds, the condition ppos > depth can never be met. Remove this dead code. Signed-off-by:
Nicolai Stange <nicstange@gmail.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Luis de Bethencourt authored
Commit bf699327 ("jbd2: Use tracepoints for history file") removed the members j_history, j_history_max and j_history_cur from struct handle_s but the descriptions stayed lingering. Removing them. Signed-off-by:
Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Jan Kara <jack@suse.cz>
-
Jens Axboe authored
ext4_io_submit() used to check for EOPNOTSUPP after bio submission, which is why it had to get an extra reference to the bio before submitting it. But since we no longer touch the bio after submission, get rid of the redundant get/put of the bio. If we do get the extra reference, we enter the slower path of having to flag this bio as now having external references. Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Nicolai Stange authored
Currently, in ext4_mb_init(), there's a loop like the following: do { ... offset += 1 << (sb->s_blocksize_bits - i); i++; } while (i <= sb->s_blocksize_bits + 1); Note that the updated offset is used in the loop's next iteration only. However, at the last iteration, that is at i == sb->s_blocksize_bits + 1, the shift count becomes equal to (unsigned)-1 > 31 (c.f. C99 6.5.7(3)) and UBSAN reports UBSAN: Undefined behaviour in fs/ext4/mballoc.c:2621:15 shift exponent 4294967295 is too large for 32-bit type 'int' [...] Call Trace: [<ffffffff818c4d25>] dump_stack+0xbc/0x117 [<ffffffff818c4c69>] ? _atomic_dec_and_lock+0x169/0x169 [<ffffffff819411ab>] ubsan_epilogue+0xd/0x4e [<ffffffff81941cac>] __ubsan_handle_shift_out_of_bounds+0x1fb/0x254 [<ffffffff81941ab1>] ? __ubsan_handle_load_invalid_value+0x158/0x158 [<ffffffff814b6dc1>] ? kmem_cache_alloc+0x101/0x390 [<ffffffff816fc13b>] ? ext4_mb_init+0x13b/0xfd0 [<ffffffff814293c7>] ? create_cache+0x57/0x1f0 [<ffffffff8142948a>] ? create_cache+0x11a/0x1f0 [<ffffffff821c2168>] ? mutex_lock+0x38/0x60 [<ffffffff821c23ab>] ? mutex_unlock+0x1b/0x50 [<ffffffff814c26ab>] ? put_online_mems+0x5b/0xc0 [<ffffffff81429677>] ? kmem_cache_create+0x117/0x2c0 [<ffffffff816fcc49>] ext4_mb_init+0xc49/0xfd0 [...] Observe that the mentioned shift exponent, 4294967295, equals (unsigned)-1. Unless compilers start to do some fancy transformations (which at least GCC 6.0.0 doesn't currently do), the issue is of cosmetic nature only: the such calculated value of offset is never used again. Silence UBSAN by introducing another variable, offset_incr, holding the next increment to apply to offset and adjust that one by right shifting it by one position per loop iteration. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=114701 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=112161 Cc: stable@vger.kernel.org Signed-off-by:
Nicolai Stange <nicstange@gmail.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Nicolai Stange authored
Currently, in mb_find_order_for_block(), there's a loop like the following: while (order <= e4b->bd_blkbits + 1) { ... bb += 1 << (e4b->bd_blkbits - order); } Note that the updated bb is used in the loop's next iteration only. However, at the last iteration, that is at order == e4b->bd_blkbits + 1, the shift count becomes negative (c.f. C99 6.5.7(3)) and UBSAN reports UBSAN: Undefined behaviour in fs/ext4/mballoc.c:1281:11 shift exponent -1 is negative [...] Call Trace: [<ffffffff818c4d35>] dump_stack+0xbc/0x117 [<ffffffff818c4c79>] ? _atomic_dec_and_lock+0x169/0x169 [<ffffffff819411bb>] ubsan_epilogue+0xd/0x4e [<ffffffff81941cbc>] __ubsan_handle_shift_out_of_bounds+0x1fb/0x254 [<ffffffff81941ac1>] ? __ubsan_handle_load_invalid_value+0x158/0x158 [<ffffffff816e93a0>] ? ext4_mb_generate_from_pa+0x590/0x590 [<ffffffff816502c8>] ? ext4_read_block_bitmap_nowait+0x598/0xe80 [<ffffffff816e7b7e>] mb_find_order_for_block+0x1ce/0x240 [...] Unless compilers start to do some fancy transformations (which at least GCC 6.0.0 doesn't currently do), the issue is of cosmetic nature only: the such calculated value of bb is never used again. Silence UBSAN by introducing another variable, bb_incr, holding the next increment to apply to bb and adjust that one by right shifting it by one position per loop iteration. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=114701 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=112161 Cc: stable@vger.kernel.org Signed-off-by:
Nicolai Stange <nicstange@gmail.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
- May 05, 2016
-
-
Jan Kara authored
When filesystem is corrupted in the right way, it can happen ext4_mark_iloc_dirty() in ext4_orphan_add() returns error and we subsequently remove inode from the in-memory orphan list. However this deletion is done with list_del(&EXT4_I(inode)->i_orphan) and thus we leave i_orphan list_head with a stale content. Later we can look at this content causing list corruption, oops, or other issues. The reported trace looked like: WARNING: CPU: 0 PID: 46 at lib/list_debug.c:53 __list_del_entry+0x6b/0x100() list_del corruption, 0000000061c1d6e0->next is LIST_POISON1 0000000000100100) CPU: 0 PID: 46 Comm: ext4.exe Not tainted 4.1.0-rc4+ #250 Stack: 60462947 62219960 602ede24 62219960 602ede24 603ca293 622198f0 602f02eb 62219950 6002c12c 62219900 601b4d6b Call Trace: [<6005769c>] ? vprintk_emit+0x2dc/0x5c0 [<602ede24>] ? printk+0x0/0x94 [<600190bc>] show_stack+0xdc/0x1a0 [<602ede24>] ? printk+0x0/0x94 [<602ede24>] ? printk+0x0/0x94 [<602f02eb>] dump_stack+0x2a/0x2c [<6002c12c>] warn_slowpath_common+0x9c/0xf0 [<601b4d6b>] ? __list_del_entry+0x6b/0x100 [<6002c254>] warn_slowpath_fmt+0x94/0xa0 [<602f4d09>] ? __mutex_lock_slowpath+0x239/0x3a0 [<6002c1c0>] ? warn_slowpath_fmt+0x0/0xa0 [<60023ebf>] ? set_signals+0x3f/0x50 [<600a205a>] ? kmem_cache_free+0x10a/0x180 [<602f4e88>] ? mutex_lock+0x18/0x30 [<601b4d6b>] __list_del_entry+0x6b/0x100 [<601177ec>] ext4_orphan_del+0x22c/0x2f0 [<6012f27c>] ? __ext4_journal_start_sb+0x2c/0xa0 [<6010b973>] ? ext4_truncate+0x383/0x390 [<6010bc8b>] ext4_write_begin+0x30b/0x4b0 [<6001bb50>] ? copy_from_user+0x0/0xb0 [<601aa840>] ? iov_iter_fault_in_readable+0xa0/0xc0 [<60072c4f>] generic_perform_write+0xaf/0x1e0 [<600c4166>] ? file_update_time+0x46/0x110 [<60072f0f>] __generic_file_write_iter+0x18f/0x1b0 [<6010030f>] ext4_file_write_iter+0x15f/0x470 [<60094e10>] ? unlink_file_vma+0x0/0x70 [<6009b180>] ? unlink_anon_vmas+0x0/0x260 [<6008f169>] ? free_pgtables+0xb9/0x100 [<600a6030>] __vfs_write+0xb0/0x130 [<600a61d5>] vfs_write+0xa5/0x170 [<600a63d6>] SyS_write+0x56/0xe0 [<6029fcb0>] ? __libc_waitpid+0x0/0xa0 [<6001b698>] handle_syscall+0x68/0x90 [<6002633d>] userspace+0x4fd/0x600 [<6002274f>] ? save_registers+0x1f/0x40 [<60028bd7>] ? arch_prctl+0x177/0x1b0 [<60017bd5>] fork_handler+0x85/0x90 Fix the problem by using list_del_init() as we always should with i_orphan list. CC: stable@vger.kernel.org Reported-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Seth Forshee authored
A failed call to dqget() returns an ERR_PTR() and not null. Fix the check in ext4_ioctl_setproject() to handle this correctly. Fixes: 9b7365fc ("ext4: add FS_IOC_FSSETXATTR/FS_IOC_FSGETXATTR interface support") Cc: stable@vger.kernel.org # v4.5 Signed-off-by:
Seth Forshee <seth.forshee@canonical.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Jan Kara <jack@suse.cz>
-
- Apr 30, 2016
-
-
Theodore Ts'o authored
Instead of just printing warning messages, if the orphan list is corrupted, declare the file system is corrupted. If there are any reserved inodes in the orphaned inode list, declare the file system corrupted and stop right away to avoid doing more potential damage to the file system. Cc: stable@vger.kernel.org Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Theodore Ts'o authored
If the orphaned inode list contains inode #5, ext4_iget() returns a bad inode (since the bootloader inode should never be referenced directly). Because of the bad inode, we end up processing the inode repeatedly and this hangs the machine. This can be reproduced via: mke2fs -t ext4 /tmp/foo.img 100 debugfs -w -R "ssv last_orphan 5" /tmp/foo.img mount -o loop /tmp/foo.img /mnt (But don't do this if you are using an unpatched kernel if you care about the system staying functional. :-) This bug was found by the port of American Fuzzy Lop into the kernel to find file system problems[1]. (Since it *only* happens if inode #5 shows up on the orphan list --- 3, 7, 8, etc. won't do it, it's not surprising that AFL needed two hours before it found it.) [1] http://events.linuxfoundation.org/sites/events/files/slides/AFL%20filesystem%20fuzzing%2C%20Vault%202016_0.pdf Cc: stable@vger.kernel.org Reported by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
- Apr 27, 2016
-
-
Jakub Wilk authored
Messages passed to ext4_warning() or ext4_error() don't need trailing newlines, because these function add the newlines themselves. Signed-off-by:
Jakub Wilk <jwilk@jwilk.net>
-
- Apr 26, 2016
-
-
Daeho Jeong authored
In ext4, there is a race condition between changing inode journal mode and ext4_writepages(). While ext4_writepages() is executed on a non-journalled mode inode, the inode's journal mode could be enabled by ioctl() and then, some pages dirtied after switching the journal mode will be still exposed to ext4_writepages() in non-journaled mode. To resolve this problem, we use fs-wide per-cpu rw semaphore by Jan Kara's suggestion because we don't want to waste ext4_inode_info's space for this extra rare case. Signed-off-by:
Daeho Jeong <daeho.jeong@samsung.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Jan Kara <jack@suse.cz>
-
Daeho Jeong authored
We already allocate delalloc blocks before changing the inode mode into "per-file data journal" mode to prevent delalloc blocks from remaining not allocated, but another issue concerned with "BH_Unwritten" status still exists. For example, by fallocate(), several buffers' status change into "BH_Unwritten", but these buffers cannot be processed by ext4_alloc_da_blocks(). So, they still remain in unwritten status after per-file data journaling is enabled and they cannot be changed into written status any more and, if they are journaled and eventually checkpointed, these unwritten buffer will cause a kernel panic by the below BUG_ON() function of submit_bh_wbc() when they are submitted during checkpointing. static int submit_bh_wbc(int rw, struct buffer_head *bh,... { ... BUG_ON(buffer_unwritten(bh)); Moreover, when "dioread_nolock" option is enabled, the status of a buffer is changed into "BH_Unwritten" after write_begin() completes and the "BH_Unwritten" status will be cleared after I/O is done. Therefore, if a buffer's status is changed into unwrutten but the buffer's I/O is not submitted and completed, it can cause the same problem after enabling per-file data journaling. You can easily generate this bug by executing the following command. ./kvm-xfstests -C 10000 -m nodelalloc,dioread_nolock generic/269 To resolve these problems and define a boundary between the previous mode and per-file data journaling mode, we need to flush and wait all the I/O of buffers of a file before enabling per-file data journaling of the file. Signed-off-by:
Daeho Jeong <daeho.jeong@samsung.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Jan Kara <jack@suse.cz>
-
Theodore Ts'o authored
The function jbd2_journal_extend() takes as its argument the number of new credits to be added to the handle. We weren't taking into account the currently unused handle credits; worse, we would try to extend the handle by N credits when it had N credits available. In the case where jbd2_journal_extend() fails because the transaction is too large, when jbd2_journal_restart() gets called, the N credits owned by the handle gets returned to the transaction, and the transaction commit is asynchronously requested, and then start_this_handle() will be able to successfully attach the handle to the current transaction since the required credits are now available. This is mostly harmless, but since ext4_ext_truncate_extend_restart() returns EAGAIN, the truncate machinery will once again try to call ext4_ext_truncate_extend_restart(), which will do the above sequence over and over again until the transaction has committed. This was found while I was debugging a lockup in caused by running xfstests generic/074 in the data=journal case. I'm still not sure why we ended up looping forever, which suggests there may still be another bug hiding in the transaction accounting machinery, but this commit prevents us from looping in the first place. Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
- Apr 24, 2016
-
-
Jan Kara authored
Currently we ask jbd2 to write all dirty allocated buffers before committing a transaction when doing writeback of delay allocated blocks. However this is unnecessary since we move all pages to writeback state before dropping a transaction handle and then submit all the necessary IO. We still need the transaction commit to wait for all the outstanding writeback before flushing disk caches during transaction commit to avoid data exposure issues though. Use the new jbd2 capability and ask it to only wait for outstanding writeback during transaction commit when writing back data in ext4_writepages(). Tested-by:
"HUANG Weller (CM/ESW12-CN)" <Weller.Huang@cn.bosch.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Jan Kara authored
Currently when filesystem needs to make sure data is on permanent storage before committing a transaction it adds inode to transaction's inode list. During transaction commit, jbd2 writes back all dirty buffers that have allocated underlying blocks and waits for the IO to finish. However when doing writeback for delayed allocated data, we allocate blocks and immediately submit the data. Thus asking jbd2 to write dirty pages just unnecessarily adds more work to jbd2 possibly writing back other redirtied blocks. Add support to jbd2 to allow filesystem to ask jbd2 to only wait for outstanding data writes before committing a transaction and thus avoid unnecessary writes. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Jan Kara authored
This flag is just duplicating what ext4_should_order_data() tells you and is used in a single place. Furthermore it doesn't reflect changes to inode data journalling flag so it may be possibly misleading. Just remove it. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Jan Kara authored
Huang has reported that in his powerfail testing he is seeing stale block contents in some of recently allocated blocks although he mounts ext4 in data=ordered mode. After some investigation I have found out that indeed when delayed allocation is used, we don't add inode to transaction's list of inodes needing flushing before commit. Originally we were doing that but commit f3b59291 removed the logic with a flawed argument that it is not needed. The problem is that although for delayed allocated blocks we write their contents immediately after allocating them, there is no guarantee that the IO scheduler or device doesn't reorder things and thus transaction allocating blocks and attaching them to inode can reach stable storage before actual block contents. Actually whenever we attach freshly allocated blocks to inode using a written extent, we should add inode to transaction's ordered inode list to make sure we properly wait for block contents to be written before committing the transaction. So that is what we do in this patch. This also handles other cases where stale data exposure was possible - like filling hole via mmap in data=ordered,nodelalloc mode. The only exception to the above rule are extending direct IO writes where blkdev_direct_IO() waits for IO to complete before increasing i_size and thus stale data exposure is not possible. For now we don't complicate the code with optimizing this special case since the overhead is pretty low. In case this is observed to be a performance problem we can always handle it using a special flag to ext4_map_blocks(). CC: stable@vger.kernel.org Fixes: f3b59291 Reported-by:
"HUANG Weller (CM/ESW12-CN)" <Weller.Huang@cn.bosch.com> Tested-by:
"HUANG Weller (CM/ESW12-CN)" <Weller.Huang@cn.bosch.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Theodore Ts'o authored
If a directory has a large number of empty blocks, iterating over all of them can take a long time, leading to scheduler warnings and users getting irritated when they can't kill a process in the middle of one of these long-running readdir operations. Fix this by adding checks to ext4_readdir() and ext4_htree_fill_tree(). This was reverted earlier due to a typo in the original commit where I experimented with using signal_pending() instead of fatal_signal_pending(). The test was in the wrong place if we were going to return signal_pending() since we would end up returning duplicant entries. See 9f2394c9 for a more detailed explanation. Added fix as suggested by Linus to check for signal_pending() in in the filldir() functions. Reported-by:
Benjamin LaHaise <bcrl@kvack.org> Google-Bug-Id: 27880676 Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
- Apr 18, 2016
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dmLinus Torvalds authored
Pull device mapper fix from Mike Snitzer: "Fix for earlier 4.6-rc4 stable@ commit that introduced improper use of write lock in cmd_read_lock() -- due to cut-n-paste gone awry (and sparse didn't catch it)" * tag 'dm-4.6-fix-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm cache metadata: fix cmd_read_lock() acquiring write lock
-
- Apr 17, 2016
-
-
Ahmed Samy authored
Commit 9567366f ("dm cache metadata: fix READ_LOCK macros and cleanup WRITE_LOCK macros") uses down_write() instead of down_read() in cmd_read_lock(), yet up_read() is used to release the lock in READ_UNLOCK(). Fix it. Fixes: 9567366f ("dm cache metadata: fix READ_LOCK macros and cleanup WRITE_LOCK macros") Cc: stable@vger.kernel.org Signed-off-by:
Ahmed Samy <f.fallen45@gmail.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc fixes from Greg KH: "Here are some small char/misc driver fixes for 4.6-rc4. Full details are in the shortlog, nothing major here. These have all been in linux-next for a while with no reported issues" * tag 'char-misc-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: lkdtm: do not leak free page on kmalloc failure lkdtm: fix memory leak of base lkdtm: fix memory leak of val extcon: palmas: Drop stray IRQF_EARLY_RESUME flag
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull misc fixes from Greg KH: "Here are three small fixes for 4.6-rc4. Two fix up some lz4 issues with big endian systems, and the remaining one resolves a minor debugfs issue that was reported. All have been in linux-next with no reported issues" * tag 'driver-core-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: lib: lz4: cleanup unaligned access efficiency detection lib: lz4: fixed zram with lz4 on big endian machines debugfs: Make automount point inodes permanently empty
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB driver fixes from Greg KH: "Here are some small USB fixes for 4.6-rc4. Mostly xhci fixes for reported issues, a UAS bug that has hit a number of people, including stable tree users, and a few other minor things. All have been in linux-next for a while with no reported issues" * tag 'usb-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: hcd: out of bounds access in for_each_companion USB: uas: Add a new NO_REPORT_LUNS quirk USB: uas: Limit qdepth at the scsi-host level doc: usb: Fix typo in gadget_multi documentation usb: host: xhci-plat: Make enum xhci_plat_type start at a non zero value xhci: fix 10 second timeout on removal of PCI hotpluggable xhci controllers usb: xhci: fix wild pointers in xhci_mem_cleanup usb: host: xhci-plat: fix cannot work if R-Car Gen2/3 run on above 4GB phys usb: host: xhci: add a new quirk XHCI_NO_64BIT_SUPPORT xhci: resume USB 3 roothub first usb: xhci: applying XHCI_PME_STUCK_QUIRK to Intel BXT B0 host cdc-acm: fix crash if flushed with nothing buffered
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull dmaengine fixes from Vinod Koul: "This time we have some odd fixes in hsu, edma, omap and xilinx. Usual fixes and nothing special" * tag 'dmaengine-fix-4.6-rc4' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: dw: fix master selection dmaengine: edma: special case slot limit workaround dmaengine: edma: Remove dynamic TPTC power management feature dmaengine: vdma: don't crash when bad channel is requested dmaengine: omap-dma: Do not suppress interrupts for memcpy dmaengine: omap-dma: Fix polled channel completion detection and handling dmaengine: hsu: correct use of channel status register dmaengine: hsu: correct residue calculation of active descriptor dmaengine: hsu: set HSU_CH_MTSR to memory width
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixlet from Ingo Molnar: "Fixes a build warning on certain Kconfig combinations" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/lockdep: Fix print_collision() unused warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull EFI fix from Ingo Molnar: "An arm64 boot crash fix" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/arm64: Don't apply MEMBLOCK_NOMAP to UEFI memory map mapping
-
Vinod Koul authored
-
Vinod Koul authored
-
Vinod Koul authored
-
Vinod Koul authored
-
- Apr 16, 2016
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A few fixes for the current series. This contains: - Two fixes for NVMe: One fixes a reset race that can be triggered by repeated insert/removal of the module. The other fixes an issue on some platforms, where we get probe timeouts since legacy interrupts isn't working. This used not to be a problem since we had the worker thread poll for completions, but since that was killed off, it means those poor souls can't successfully probe their NVMe device. Use a proper IRQ check and probe (msi-x -> msi ->legacy), like most other drivers to work around this. Both from Keith. - A loop corruption issue with offset in iters, from Ming Lei. - A fix for not having the partition stat per cpu ref count initialized before sending out the KOBJ_ADD, which could cause user space to access the counter prior to initialization. Also from Ming Lei. - A fix for using the wrong congestion state, from Kaixu Xia" * 'for-linus' of git://git.kernel.dk/linux-block: block: loop: fix filesystem corruption in case of aio/dio NVMe: Always use MSI/MSI-x interrupts NVMe: Fix reset/remove race writeback: fix the wrong congested state variable definition block: partition: initialize percpuref before sending out KOBJ_ADD
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm fixes from Ross Zwisler: "Two fixes: - Fix memcpy_from_pmem() to fallback to memcpy() for architectures where CONFIG_ARCH_HAS_PMEM_API=n. - Add a comment explaining why we write data twice when clearing poison in pmem_do_bvec(). This has passed a boot test on an X86_32 config, which was the architecture where issue #1 above was first noticed" Dan Williams adds: "We're giving this multi-maintainer setup a shot, so expect libnvdimm pull requests from either Ross or I going forward" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm, pmem: clarify the write+clear_poison+write flow pmem: fix BUG() error in pmem.h:48 on X86_32
-
git://git.infradead.org/linux-mtdLinus Torvalds authored
Pull MTD fix from Brian Norris: "One MTD fix for v4.6-rc4: In the v4.4 cycle, we relaxed the requirement for assigning mtd->owner, but we didn't remove this error case. It's hit only by drivers that are both: (a) using nand_scan() directly and (b) built as modules We haven't seen explicit complaints about this (most use cases don't fit one or both of the above), but we should definitely not be BUG()'ing here" * tag 'for-linus-20160415' of git://git.infradead.org/linux-mtd: mtd: nand: Drop mtd.owner requirement in nand_scan
-
git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: "Here are a couple of mmc fixes intended for v4.6 rc4. Regarding the fix for the regression about mmcblk device indexes. The approach taken to solve the problem seems to be good enough. There were some discussions around the solution, but it seems like people were happy about it in the end. MMC core: - Restore similar old behaviour when assigning mmcblk device indexes MMC host: - tegra: Disable UHS-I modes for Tegra124 to fix regression" * tag 'mmc-v4.6-rc3' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: tegra: Disable UHS-I modes for Tegra124 mmc: block: Use the mmc host device index as the mmcblk device index
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "This contains fixes for exynos, amdgpu, radeon, i915 and qxl. It also contains some fixes to the core drm edid parser. qxl: - fix for a cursor hotspot issue radeon: - some MST fixes that I've been running locally and make my monitor a bit happier exynos: - fix some regressions and build fixes amdgpu: - a couple of small fixes i915: - two DP MST fixes and a couple of other regression fixes Nothing too out of the ordinary or surprising at this point" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/exynos: Use VIDEO_SAMSUNG_S5P_G2D=n as G2D Kconfig dependency drm/exynos: fix a warning message drm/exynos: mic: fix an error code drm/exynos: fimd: fix broken dp_clock control drm/exynos: build fbdev code conditionally drm/exynos: fix adjusted_mode pointer in exynos_plane_mode_set drm/exynos: fix error handling in exynos_drm_subdrv_open drm/amd/amdgpu: fix irq domain remove for tonga ih drm/i915: fix deadlock on lid open drm/radeon: use helper for mst connector dpms. drm/radeon/mst: port some MST setup code from DAL. drm/amdgpu: add invisible pin size statistic drm/edid: Fix DMT 1024x768@43Hz (interlaced) timings drm/i915: Exit cherryview_irq_handler() after one pass drm/i915: Call intel_dp_mst_resume() before resuming displays drm/i915: Fix race condition in intel_dp_destroy_mst_connector() drm/edid: Fix parsing of EDID 1.4 Established Timings III descriptor drm/edid: Fix EDID Established Timings I and II drm/qxl: fix cursor position with non-zero hotspot
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc ftrace fixes from Helge Deller: "This is (most likely) the last pull request for v4.6 for the parisc architecture. It fixes the FTRACE feature for parisc, which is horribly broken since quite some time and doesn't even compile. This patch just fixes the bare minimum (it actually removes more lines than it adds), so that the function tracer works again on 32- and 64bit kernels. I've queued up additional patches on top of this patch which e.g. add the syscall tracer, but those have to wait for the merge window for v4.7." * 'parisc-4.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix ftrace function tracer
-