- Jul 26, 2016
-
-
Hadar Hen Zion authored
Add support for query the minimum inline mode from the Firmware. It is required for correct TX steering according to L3/L4 packet headers. Each send queue (SQ) has inline mode that defines the minimal required headers that needs to be copied into the SQ WQE. The driver asks the Firmware for the wqe_inline_mode device capability value. In case the device capability defined as "vport context" the driver must check the reported min inline mode from the vport context before creating its SQs. Signed-off-by:
Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hadar Hen Zion authored
Each send queue (SQ) has inline mode that defines the minimal required inline headers in the SQ WQE. Before sending each packet check that the minimum required headers on the WQE are copied. Signed-off-by:
Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vegard Nossum authored
I was seeing a lot of these: BUG: sleeping function called from invalid context at mm/slab.h:388 in_atomic(): 0, irqs_disabled(): 0, pid: 14971, name: trinity-c2 Preemption disabled at:[<ffffffff819bcd46>] rhashtable_walk_start+0x46/0x150 [<ffffffff81149abb>] preempt_count_add+0x1fb/0x280 [<ffffffff83295722>] _raw_spin_lock+0x12/0x40 [<ffffffff811aac87>] console_unlock+0x2f7/0x930 [<ffffffff811ab5bb>] vprintk_emit+0x2fb/0x520 [<ffffffff811aba6a>] vprintk_default+0x1a/0x20 [<ffffffff812c171a>] printk+0x94/0xb0 [<ffffffff811d6ed0>] print_stack_trace+0xe0/0x170 [<ffffffff8115835e>] ___might_sleep+0x3be/0x460 [<ffffffff81158490>] __might_sleep+0x90/0x1a0 [<ffffffff8139b823>] kmem_cache_alloc+0x153/0x1e0 [<ffffffff819bca1e>] rhashtable_walk_init+0xfe/0x2d0 [<ffffffff82ec64de>] sctp_transport_walk_start+0x1e/0x60 [<ffffffff82edd8ad>] sctp_transport_seq_start+0x4d/0x150 [<ffffffff8143a82b>] seq_read+0x27b/0x1180 [<ffffffff814f97fc>] proc_reg_read+0xbc/0x180 [<ffffffff813d471b>] __vfs_read+0xdb/0x610 [<ffffffff813d4d3a>] vfs_read+0xea/0x2d0 [<ffffffff813d615b>] SyS_pread64+0x11b/0x150 [<ffffffff8100334c>] do_syscall_64+0x19c/0x410 [<ffffffff832960a5>] return_from_SYSCALL_64+0x0/0x6a [<ffffffffffffffff>] 0xffffffffffffffff Apparently we always need to call rhashtable_walk_stop(), even when rhashtable_walk_start() fails: * rhashtable_walk_start - Start a hash table walk * @iter: Hash table iterator * * Start a hash table walk. Note that we take the RCU lock in all * cases including when we return an error. So you must always call * rhashtable_walk_stop to clean up. otherwise we never call rcu_read_unlock() and we get the splat above. Fixes: 53fa1036 ("sctp: fix some rhashtable functions using in sctp proc/diag") See-also: 53fa1036 ("sctp: fix some rhashtable functions using in sctp proc/diag") See-also: f2dba9c6 ("rhashtable: Introduce rhashtable_walk_*") Cc: Xin Long <lucien.xin@gmail.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: stable@vger.kernel.org Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 10GbE Intel Wired LAN Driver Updates 2016-07-22 This series contains updates to ixgbe and ixgbevf only. Emil fixes the NACK check in ixgbevf_set_uc_addr_vf() for instances where the index is not equal to zero. Fixes an issue where mac->ops.setup_fc can be NULL for backplanes which can cause the driver to crash on load. Don fixes the second parameter of the LED functions, which is the index to the LED we are interested in affecting. Fixed variable to store register reads to unsigned integer. Adds support for the new x553 hardware into ixgbevf. Fixed a missing rtnl lock around ixgbevf_reinit_locked(). Fixed an issue where in ixgbevf_reset_subtask() was not verifying that the port has been removed. Cleans up the initial crosstalk fix, since the SFP that indicates the presence of a SFP+ module changes between hardware types. Babu Moger fixes typo in freeing IRQ, since the array subscript increments after the execution of the statement. Wei Yongjun adds the missing destroy_workqueue() before returning from ixgbe_init_module() in the error handling case. Tony adds range checking for setting the MTU from the VF, where the PF can return a NACK but this was not passed on to the VF, so propagate the results from the PF to the VF so errors can be reported. Consolidates mailbox read and write functions, since the recent changes to ixgbevf_write_msg_read_ack(), other functions are performing the same operations done here. Colin Ian King removes a redundant check on ret_val, since ret_val has not changed since the previous check. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vegard Nossum authored
I ran into this: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 2 PID: 2012 Comm: trinity-c3 Not tainted 4.7.0-rc7+ #19 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff8800b745f2c0 ti: ffff880111740000 task.ti: ffff880111740000 RIP: 0010:[<ffffffff82bbf066>] [<ffffffff82bbf066>] irttp_connect_request+0x36/0x710 RSP: 0018:ffff880111747bb8 EFLAGS: 00010286 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000069dd8358 RDX: 0000000000000009 RSI: 0000000000000027 RDI: 0000000000000048 RBP: ffff880111747c00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000069dd8358 R11: 1ffffffff0759723 R12: 0000000000000000 R13: ffff88011a7e4780 R14: 0000000000000027 R15: 0000000000000000 FS: 00007fc738404700(0000) GS:ffff88011af00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc737fdfb10 CR3: 0000000118087000 CR4: 00000000000006e0 Stack: 0000000000000200 ffff880111747bd8 ffffffff810ee611 ffff880119f1f220 ffff880119f1f4f8 ffff880119f1f4f0 ffff88011a7e4780 ffff880119f1f232 ffff880119f1f220 ffff880111747d58 ffffffff82bca542 0000000000000000 Call Trace: [<ffffffff82bca542>] irda_connect+0x562/0x1190 [<ffffffff825ae582>] SYSC_connect+0x202/0x2a0 [<ffffffff825b4489>] SyS_connect+0x9/0x10 [<ffffffff8100334c>] do_syscall_64+0x19c/0x410 [<ffffffff83295ca5>] entry_SYSCALL64_slow_path+0x25/0x25 Code: 41 89 ca 48 89 e5 41 57 41 56 41 55 41 54 41 89 d7 53 48 89 fb 48 83 c7 48 48 89 fa 41 89 f6 48 c1 ea 03 48 83 ec 20 4c 8b 65 10 <0f> b6 04 02 84 c0 74 08 84 c0 0f 8e 4c 04 00 00 80 7b 48 00 74 RIP [<ffffffff82bbf066>] irttp_connect_request+0x36/0x710 RSP <ffff880111747bb8> ---[ end trace 4cda2588bc055b30 ]--- The problem is that irda_open_tsap() can fail and leave self->tsap = NULL, and then irttp_connect_request() almost immediately dereferences it. Cc: stable@vger.kernel.org Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Marcelo Ricardo Leitner authored
The head skb for GSO packets won't travel through the inner depths of SCTP stack as it doesn't contain any chunks on it. That means skb->sk doesn't get set and then when sctp_recvmsg() calls sctp_inet6_skb_msgname() on the head_skb it panics, as this last needs to check flags at the socket (sp->v4mapped). The fix is to initialize skb->sk for th head skb once we are able to do it. That is, when the first chunk is processed. Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Marcelo Ricardo Leitner authored
Now that the backlog processing is called with BH enabled, we have to disable BH before taking the socket lock via bh_lock_sock() otherwise it may dead lock: sctp_backlog_rcv() bh_lock_sock(sk); if (sock_owned_by_user(sk)) { if (sk_add_backlog(sk, skb, sk->sk_rcvbuf)) sctp_chunk_free(chunk); else backloged = 1; } else sctp_inq_push(inqueue, chunk); bh_unlock_sock(sk); while sctp_inq_push() was disabling/enabling BH, but enabling BH triggers pending softirq, which then may try to re-lock the socket in sctp_rcv(). [ 219.187215] <IRQ> [ 219.187217] [<ffffffff817ca3e0>] _raw_spin_lock+0x20/0x30 [ 219.187223] [<ffffffffa041888c>] sctp_rcv+0x48c/0xba0 [sctp] [ 219.187225] [<ffffffff816e7db2>] ? nf_iterate+0x62/0x80 [ 219.187226] [<ffffffff816f1b14>] ip_local_deliver_finish+0x94/0x1e0 [ 219.187228] [<ffffffff816f1e1f>] ip_local_deliver+0x6f/0xf0 [ 219.187229] [<ffffffff816f1a80>] ? ip_rcv_finish+0x3b0/0x3b0 [ 219.187230] [<ffffffff816f17a8>] ip_rcv_finish+0xd8/0x3b0 [ 219.187232] [<ffffffff816f2122>] ip_rcv+0x282/0x3a0 [ 219.187233] [<ffffffff810d8bb6>] ? update_curr+0x66/0x180 [ 219.187235] [<ffffffff816abac4>] __netif_receive_skb_core+0x524/0xa90 [ 219.187236] [<ffffffff810d8e00>] ? update_cfs_shares+0x30/0xf0 [ 219.187237] [<ffffffff810d557c>] ? __enqueue_entity+0x6c/0x70 [ 219.187239] [<ffffffff810dc454>] ? enqueue_entity+0x204/0xdf0 [ 219.187240] [<ffffffff816ac048>] __netif_receive_skb+0x18/0x60 [ 219.187242] [<ffffffff816ad1ce>] process_backlog+0x9e/0x140 [ 219.187243] [<ffffffff816ac8ec>] net_rx_action+0x22c/0x370 [ 219.187245] [<ffffffff817cd352>] __do_softirq+0x112/0x2e7 [ 219.187247] [<ffffffff817cc3bc>] do_softirq_own_stack+0x1c/0x30 [ 219.187247] <EOI> [ 219.187248] [<ffffffff810aa1c8>] do_softirq.part.14+0x38/0x40 [ 219.187249] [<ffffffff810aa24d>] __local_bh_enable_ip+0x7d/0x80 [ 219.187254] [<ffffffffa0408428>] sctp_inq_push+0x68/0x80 [sctp] [ 219.187258] [<ffffffffa04190f1>] sctp_backlog_rcv+0x151/0x1c0 [sctp] [ 219.187260] [<ffffffff81692b07>] __release_sock+0x87/0xf0 [ 219.187261] [<ffffffff81692ba0>] release_sock+0x30/0xa0 [ 219.187265] [<ffffffffa040e46d>] sctp_accept+0x17d/0x210 [sctp] [ 219.187266] [<ffffffff810e7510>] ? prepare_to_wait_event+0xf0/0xf0 [ 219.187268] [<ffffffff8172d52c>] inet_accept+0x3c/0x130 [ 219.187269] [<ffffffff8168d7a3>] SYSC_accept4+0x103/0x210 [ 219.187271] [<ffffffff817ca2ba>] ? _raw_spin_unlock_bh+0x1a/0x20 [ 219.187272] [<ffffffff81692bfc>] ? release_sock+0x8c/0xa0 [ 219.187276] [<ffffffffa0413e22>] ? sctp_inet_listen+0x62/0x1b0 [sctp] [ 219.187277] [<ffffffff8168f2d0>] SyS_accept+0x10/0x20 Fixes: 860fbbc3 ("sctp: prepare for socket backlog behavior change") Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Haiyang Zhang authored
Added a condition to avoid bonding devices with same MAC registering as VF. Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
The check for a -ve error is redundant, remove it and just immediately return the return value from the call to seq_open_net. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mike Manning authored
Default kernel behavior is to delete IPv6 addresses on link down, which entails deletion of the multicast and the subnet-router anycast addresses. These deletions do not happen with sysctl setting to keep global IPv6 addresses on link down, so every link down/up causes an increment of the anycast and multicast refcounts. These bogus refcounts may stop these addrs from being removed on subsequent calls to delete them. The solution is to leave the groups for the multicast and subnet anycast on link down for the callflow when global IPv6 addresses are kept. Fixes: f1705ec1 ("net: ipv6: Make address flushing on ifdown optional") Signed-off-by:
Mike Manning <mmanning@brocade.com> Acked-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2016-07-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== pull-request: wireless-drivers-next 2016-07-22 I'm sick so I have to keep this short, but here's the last pull request to net-next. This time there's a trivial conflict with mtd tree: http://lkml.kernel.org/g/20160720123133.44dab209@canb.auug.org.au We concluded with Brian (CCed) that it's best that we ask Linus to fix this. The patches have been in linux-next for a couple of days. This time I haven't done any merge tests so I don't know if there are any other conflicts etc. Please let me know if there are any problems. wireless-drivers-next patches for 4.8 Major changes: wl18xx * add initial mesh support bcma * serial flash support on non-MIPS SoCs ath10k * enable support for QCA9888 * disable wake_tx_queue() mac80211 op for older devices to workaround throughput regression ath9k * implement temperature compensation support for AR9003+ ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
Remove including <linux/version.h> that don't need it. Signed-off-by:
Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xin Long authored
Commit 486bdee0 ("sctp: add support for RPS and RFS") saves skb->hash into sk->sk_rxhash so that the inet_* can record it to flow table. But sctp uses sock_common_recvmsg as .recvmsg instead of inet_recvmsg, sock_common_recvmsg doesn't invoke sock_rps_record_flow to record the flow. It may cause that the receiver has no chances to record the flow if it doesn't send msg or poll the socket. So this patch fixes it by using inet_recvmsg as .recvmsg in sctp. Fixes: 486bdee0 ("sctp: add support for RPS and RFS") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Davide Caratti says: ==================== macsec: fix configurable ICV length This series provides a fix for macsec configurable ICV length. The maximum length of ICV element has been made compliant to IEEE 802.1AE, and error reporting in case of cipher suite configuration failure has been improved. Finally, a test has been added to netlink verify() callback in order to avoid creation of macsec interfaces having user-provided ICV length values that are not supported by the cipher suite. ==================== Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Acked-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Davide Caratti authored
Test the cipher suite initialization in case ICV length has a value different than its default. If this test fails, creation of a new macsec link will also fail. This avoids situations where further security associations can't be added due to failures of crypto_aead_setauthsize(), caused by unsupported user-provided values of the ICV length. Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Davide Caratti authored
preserve the return value of AEAD functions that are called when a SA is created, to avoid inappropriate display of "RTNETLINK answers: Cannot allocate memory" message. Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Davide Caratti authored
IEEE 802.1AE-2006 standard recommends that the ICV element in a MACsec frame should not exceed 16 octets: add MACSEC_STD_ICV_LEN in uapi definitions accordingly, and avoid accepting configurations where the ICV length exceeds the standard value. Leave definition of MACSEC_MAX_ICV_LEN unchanged for backwards compatibility with userspace programs. Fixes: dece8d2b ("uapi: add MACsec bits") Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Commit 8626c56c ("bridge: fix potential use-after-free when hook returns QUEUE or STOLEN verdict") caused LLDP packets arriving through a bridge port to be re-injected to the Rx path with skb->dev set to the bridge device, but this breaks the lldpad daemon. The lldpad daemon opens a packet socket with protocol set to ETH_P_LLDP for any valid device on the system, which doesn't not include soft devices such as bridge and VLAN. Since packet sockets (ptype_base) are processed in the Rx path after the Rx handler, LLDP packets with skb->dev set to the bridge device never reach the lldpad daemon. Fix this by making the bridge's Rx handler re-inject LLDP packets with RX_HANDLER_PASS, which effectively restores the behaviour prior to the mentioned commit. This means netfilter will never receive LLDP packets coming through a bridge port, as I don't see a way in which we can have okfn() consume the packet without breaking existing behaviour. I've already carried out a similar fix for STP packets in commit 56fae404 ("bridge: Fix incorrect re-injection of STP packets"). Fixes: 8626c56c ("bridge: fix potential use-after-free when hook returns QUEUE or STOLEN verdict") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Cc: Florian Westphal <fw@strlen.de> Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xin Long authored
This patch makes sctp support ipv6 nonlocal bind by adding sp->inet.freebind and net->ipv6.sysctl.ip_nonlocal_bind check in sctp_v6_available as what sctp did to support ipv4 nonlocal bind (commit cdac4e07 ). Reported-by:
Shijoe George <spanjikk@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Conflicts: drivers/net/ethernet/intel/i40e/i40e_main.c Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2016-07-22 This series contains updates to i40e and i40evf. Heinrich Schuchardt found a possible null pointer being dereferenced in i40e_debug_aq(), fixed the issue by doing the variable assignment after we are sure the pointer is not null. Avinash fixed an issue when link was down, we were not showing the correct advertised link modes. Mitch cleans up a useless initializer since the variable is assigned right away. Refactors the receive filter handling to properly track filter adds and deletes so the driver will not lose filters during a reset and up/down cycles. Also added a tracking mechanism so that the driver knows when to enter and leave promiscuous mode. Catherine removes a device id which is not needed (or used). Moves a mutex lock since we need to lock the client list around the i40e_client_release() call to prevent the release from interrupting the client instances while they are being added. Joshua adds Hyper-V specific VF device ids. Amitoj Kaur Chawla cleans up a redundant memset() call before a memcpy(). Stefan Assmann adds the missing link advertise for some x710 NICs. Tushar Dave fixes and issue found on SPARC, where a PF reset clears MAC filters and if a platform-specific MAC address is used, the driver has to explicitly write default MAC address to MAC filters otherwise all incoming traffic destined to the default MAC address will be dropped after reset. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
This patch fixes the __output_custom() routine we currently use with bpf_skb_copy(). I missed that when len is larger than the size of the current handle, we can issue multiple invocations of copy_func, and __output_custom() advances destination but also source buffer by the written amount of bytes. When we have __output_custom(), this is actually wrong since in that case the source buffer points to a non-linear object, in our case an skb, which the copy_func helper is supposed to walk. Therefore, since this is non-linear we thus need to pass the offset into the helper, so that copy_func can use it for extracting the data from the source object. Therefore, adjust the callback signatures properly and pass offset into the skb_header_pointer() invoked from bpf_skb_copy() callback. The __DEFINE_OUTPUT_COPY_BODY() is adjusted to accommodate for two things: i) to pass in whether we should advance source buffer or not; this is a compile-time constant condition, ii) to pass in the offset for __output_custom(), which we do with help of __VA_ARGS__, so everything can stay inlined as is currently. Both changes allow for adapting the __output_* fast-path helpers w/o extra overhead. Fixes: 555c8a86 ("bpf: avoid stack copy and use skb ctx for event output") Fixes: 7e3f977e ("perf, events: add non-linear data support for raw records") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
gcc-4.9 and higher warn about the newly added NSCI code: net/ncsi/ncsi-manage.c: In function 'ncsi_process_next_channel': net/ncsi/ncsi-manage.c:1003:2: error: 'old_state' may be used uninitialized in this function [-Werror=maybe-uninitialized] The warning is a false positive and therefore harmless, but it would be good to avoid it anyway. I have determined that the barrier in the spin_unlock_irqsave() is what confuses gcc to the point that it cannot track whether the variable was unused or not. This rearranges the code in a way that makes it obvious to gcc that old_state is always initialized at the time of use, functionally this should not change anything. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Varun Prakash says: ==================== common library for Chelsio drivers. This patch series adds common library module(libcxgb.ko) for Chelsio drivers to remove duplicate code. This series moves common iSCSI DDP Page Pod manager code from cxgb4.ko to libcxgb.ko, earlier this code was used by only cxgbit.ko now it is used by three Chelsio iSCSI drivers cxgb3i, cxgb4i, cxgbit. In future this module will have common connection management and hardware specific code that can be shared by multiple Chelsio drivers(cxgb4, csiostor, iw_cxgb4, cxgb4i, cxgbit). Please review. Thanks -v3 - removed unused module init and exit functions. -v2 - updated CONFIG_CHELSIO_LIB to an invisible option - changed libcxgb.ko module license from GPL to Dual BSD/GPL ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Varun Prakash authored
Fix following sparse warnings warning: symbol 'cxgb3i_ofld_init' was not declared. Should it be static? warning: symbol 'cxgb4i_cplhandlers' was not declared. Should it be static? warning: symbol 'cxgb4i_ofld_init' was not declared. Should it be static? Signed-off-by:
Varun Prakash <varun@chelsio.com> Reviewed-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Varun Prakash authored
Export cxgbi_ppm_release() to release ppod manager and cxgbi_tagmask_set() to set tag mask, they are used by cxgb3i, cxgb4i and cxgbit. Signed-off-by:
Varun Prakash <varun@chelsio.com> Reviewed-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Varun Prakash authored
Add iSCSI DDP support in cxgb3i driver using common iSCSI DDP Page Pod Manager. Signed-off-by:
Varun Prakash <varun@chelsio.com> Reviewed-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Varun Prakash authored
Add iSCSI DDP support in cxgb4i driver using common iSCSI DDP Page Pod Manager. Signed-off-by:
Varun Prakash <varun@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Varun Prakash authored
Remove old ddp code from cxgb3i,cxgb4i,libcxgbi. Next two commits adds DDP support using common iSCSI DDP Page Pod Manager. Signed-off-by:
Varun Prakash <varun@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Varun Prakash authored
Add common library module(libcxgb.ko) for Chelsio drivers to remove duplicate code. Code for iSCSI DDP Page Pod Manager is moved from cxgb4.ko to libcxgb.ko. Earlier only cxgbit.ko was using this code, now cxgb3i and cxgb4i will also use common Page Pod manager code. In future this module will have common connection management and hardware specific code that can be shared by multiple Chelsio drivers. Signed-off-by:
Varun Prakash <varun@chelsio.com> Reviewed-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
Change the ageing_time type in br_set_ageing_time() from u32 to what it is expected to be, i.e. a clock_t. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
br_stp_enable_bridge() does take the br->lock spinlock. Fix its wrongly pasted comment and use the same as br_stp_disable_bridge(). Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ganesh Goudar authored
Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mark Bloch authored
When using an IPoIB bond currently only active-backup mode is a valid use case and this commit strengthens it. Since commit 2ab82852 ("net/bonding: Enable bonding to enslave netdevices not supporting set_mac_address()") was introduced till 4.7-rc1, IPoIB didn't support the set_mac_address ndo, and hence the fail over mac policy always applied to IPoIB bonds. With the introduction of commit 492a7e67 ("IB/IPoIB: Allow setting the device address"), that doesn't hold and practically IPoIB bonds are broken as of that. To fix it, lets go to fail over mac if the device doesn't support the ndo OR this is IPoIB device. As a by-product, this commit also prevents a stack corruption which occurred when trying to copy 20 bytes (IPoIB) device address to a sockaddr struct that has only 16 bytes of storage. Signed-off-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Acked-by:
Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Jul 25, 2016
-
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: implement port mirroring offload This patchset introduces tc matchall classifier and its offload to Spectrum hardware. In combination with mirred action, defined port mirroring setup is offloaded by mlxsw/spectrum driver. The commands used for creating mirror ports: tc qdisc add dev eth25 handle ffff: ingress tc filter add dev eth25 parent ffff: \ matchall skip_sw \ action mirred egress mirror \ dev eth27 tc qdisc add dev eth25 handle 1: root prio tc filter add dev eth25 parent 1: \ matchall skip_sw \ action mirred egress mirror \ dev eth27 These patches contain: - Resource query implementation - Hardware port mirorring support for spectrum. - Definition of the matchall traffic classifier. - General support for hw-offloading for that classifier. - Specific spectrum implementaion for matchall offloading. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yotam Gigi authored
This patch offloads port mirroring directives to hw using the matchall TC with action mirror. It includes both the implementation of the ndo_setup_tc function for the spectrum driver and the spectrum hardware offload configuration code. The hardware offload code is basically two new functions which are capable of adding and removing a new mirror ports pair. It is done using the MPAT, MPAR and SBIB registers: - A new Switch-Port Analyzer (SPAN) entry is added using MPAT to the 'to' port. - The 'to' port is bound to the SPAN entry using MPAR register. - In case of egress SPAN, the 'to' port gets a new internal shared buffer using SBIB register. In addition, a new database was added to the mlxsw_sp struct to store all the SPAN entries and their bound ports list. The number of supported SPAN entries is determined by resource query. Signed-off-by:
Yotam Gigi <yotamg@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yotam Gigi authored
The helper function is_tcf_mirred_mirror helps finding whether an action struct is of type mirred and is configured to be of type mirror. Signed-off-by:
Yotam Gigi <yotamg@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yotam Gigi authored
The MPAR register is used to bind ports to a SPAN entry (which was created using MPAT register) and thus mirror their traffic (ingress / egress) to a different port. Signed-off-by:
Yotam Gigi <yotamg@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yotam Gigi authored
The MPAT register is used to query and configure the Switch Port Analyzer (SPAN) table. This register is used to configure a port as a mirror output port, while after that a mirrored input port can be bound using MPAR register. Signed-off-by:
Yotam Gigi <yotamg@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yotam Gigi authored
The SBIB register configures per port buffer for internal use. This register is used to configure an egress mirror buffer on the egress port which does the mirroring. Signed-off-by:
Yotam Gigi <yotamg@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yotam Gigi authored
Following the work that have been done on offloading classifiers like u32 and flower, now the match-all classifier hw offloading is possible. if the interface supports tc offloading. To control the offloading, two tc flags have been introduced: skip_sw and skip_hw. Typical usage: tc filter add dev eth25 parent ffff: \ matchall skip_sw \ action mirred egress mirror \ dev eth27 Signed-off-by:
Yotam Gigi <yotamg@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-