No external dependencies, might as well handle this directly.
xfrm_afinfo_policy is now 40 bytes on x86_64.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

handle this directly, its only used by ipv6.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

Only used by ipv4, we can read the fl4 tos value directly instead.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

when CONFIG_INET is not enabled:
net/xfrm/xfrm_output.c: In function ‘xfrm4_tunnel_encap_add’:
net/xfrm/xfrm_output.c:234:2: error: implicit declaration of function ‘ip_select_ident’ [-Werror=implicit-function-declaration]
ip_select_ident(dev_net(dst->dev), skb, NULL);

XFRM only supports ipv4 and ipv6 so change dependency to INET and place
user-visible options (pfkey sockets, migrate support and the like)
under 'if INET' guard as well.

Fixes: 1de70830

 ("xfrm: remove output2 indirection from xfrm_mode")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

This structure is now only 4 bytes, so its more efficient
to cache a copy rather than its address.

No significant size difference in allmodconfig vmlinux.

With non-modular kernel that has all XFRM options enabled, this
series reduces vmlinux image size by ~11kb. All xfrm_mode
indirections are gone and all modes are built-in.

before (ipsec-next master):
    text      data      bss         dec   filename
21071494   7233140 11104324    39408958   vmlinux.master

after this series:
21066448   7226772 11104324    39397544   vmlinux.patched

With allmodconfig kernel, the size increase is only 362 bytes,
even all the xfrm config options removed in this series are
modular.

before:
    text      data     bss      dec   filename
15731286   6936912 4046908 26715106   vmlinux.master

after this series:
15731492   6937068  4046908  26715468 vmlinux

Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

after previous changes, xfrm_mode contains no function pointers anymore
and all modules defining such struct contain no code except an init/exit
functions to register the xfrm_mode struct with the xfrm core.

Just place the xfrm modes core and remove the modules,
the run-time xfrm_mode register/unregister functionality is removed.

Before:

    text    data     bss      dec filename
    7523     200    2364    10087 net/xfrm/xfrm_input.o
   40003     628     440    41071 net/xfrm/xfrm_state.o
15730338 6937080 4046908 26714326 vmlinux

    7389     200    2364    9953  net/xfrm/xfrm_input.o
   40574     656     440   41670  net/xfrm/xfrm_state.o
15730084 6937068 4046908 26714060 vmlinux

The xfrm*_mode_{transport,tunnel,beet} modules are gone.

v2: replace CONFIG_INET6_XFRM_MODE_* IS_ENABLED guards with CONFIG_IPV6
    ones rather than removing them.

Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

Adds an EXPORT_SYMBOL for afinfo_get_rcu, as it will now be called from
ipv6 in case of CONFIG_IPV6=m.

This change has virtually no effect on vmlinux size, but it reduces
afinfo size and allows followup patch to make xfrm modes const.

v2: mark if (afinfo) tests as likely (Sabrina)
    re-fetch afinfo according to inner_mode in xfrm_prepare_input().

Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

similar to previous patch: no external module dependencies,
so we can avoid the indirection by placing this in the core.

This change removes the last indirection from xfrm_mode and the
xfrm4|6_mode_{beet,tunnel}.c modules contain (almost) no code anymore.

Before:
   text    data     bss     dec     hex filename
   3957     136       0    4093     ffd net/xfrm/xfrm_output.o
    587      44       0     631     277 net/ipv4/xfrm4_mode_beet.o
    649      32       0     681     2a9 net/ipv4/xfrm4_mode_tunnel.o
    625      44       0     669     29d net/ipv6/xfrm6_mode_beet.o
    599      32       0     631     277 net/ipv6/xfrm6_mode_tunnel.o
After:
   text    data     bss     dec     hex filename
   5359     184       0    5543    15a7 net/xfrm/xfrm_output.o
    171      24       0     195      c3 net/ipv4/xfrm4_mode_beet.o
    171      24       0     195      c3 net/ipv4/xfrm4_mode_tunnel.o
    172      24       0     196      c4 net/ipv6/xfrm6_mode_beet.o
    172      24       0     196      c4 net/ipv6/xfrm6_mode_tunnel.o

v2: fold the *encap_add functions into xfrm*_prepare_output
    preserve (move) output2 comment (Sabrina)
    use x->outer_mode->encap, not inner
    fix a build breakage on ppc (kbuild robot)

Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

No external dependencies on any module, place this in the core.
Increase is about 1800 byte for xfrm_input.o.

The beet helpers get added to internal header, as they can be reused
from xfrm_output.c in the next patch (kernel contains several
copies of them in the xfrm{4,6}_mode_beet.c files).

Before:
   text    data     bss     dec filename
   5578     176    2364    8118 net/xfrm/xfrm_input.o
   1180      64       0    1244 net/ipv4/xfrm4_mode_beet.o
    171      40       0     211 net/ipv4/xfrm4_mode_transport.o
   1163      40       0    1203 net/ipv4/xfrm4_mode_tunnel.o
   1083      52       0    1135 net/ipv6/xfrm6_mode_beet.o
    172      40       0     212 net/ipv6/xfrm6_mode_ro.o
    172      40       0     212 net/ipv6/xfrm6_mode_transport.o
   1056      40       0    1096 net/ipv6/xfrm6_mode_tunnel.o

After:
   text    data     bss     dec filename
   7373     200    2364    9937 net/xfrm/xfrm_input.o
    587      44       0     631 net/ipv4/xfrm4_mode_beet.o
    171      32       0     203 net/ipv4/xfrm4_mode_transport.o
    649      32       0     681 net/ipv4/xfrm4_mode_tunnel.o
    625      44       0     669 net/ipv6/xfrm6_mode_beet.o
    172      32       0     204 net/ipv6/xfrm6_mode_ro.o
    172      32       0     204 net/ipv6/xfrm6_mode_transport.o
    599      32       0     631 net/ipv6/xfrm6_mode_tunnel.o

v2: pass inner_mode to xfrm_inner_mode_encap_remove to fix
    AF_UNSPEC selector breakage (bisected by Benedict Wong)

Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

These functions are small and we only have versions for tunnel
and transport mode for ipv4 and ipv6 respectively.

Just place the 'transport or tunnel' conditional in the protocol
specific function instead of using an indirection.

Before:
    3226       12       0     3238   net/ipv4/esp4_offload.o
    7004      492       0     7496   net/ipv4/ip_vti.o
    3339       12       0     3351   net/ipv6/esp6_offload.o
   11294      460       0    11754   net/ipv6/ip6_vti.o
    1180       72       0     1252   net/ipv4/xfrm4_mode_beet.o
     428       48       0      476   net/ipv4/xfrm4_mode_transport.o
    1271       48       0     1319   net/ipv4/xfrm4_mode_tunnel.o
    1083       60       0     1143   net/ipv6/xfrm6_mode_beet.o
     172       48       0      220   net/ipv6/xfrm6_mode_ro.o
     429       48       0      477   net/ipv6/xfrm6_mode_transport.o
    1164       48       0     1212   net/ipv6/xfrm6_mode_tunnel.o
15730428  6937008 4046908 26714344   vmlinux

After:
    3461       12       0     3473   net/ipv4/esp4_offload.o
    7000      492       0     7492   net/ipv4/ip_vti.o
    3574       12       0     3586   net/ipv6/esp6_offload.o
   11295      460       0    11755   net/ipv6/ip6_vti.o
    1180       64       0     1244   net/ipv4/xfrm4_mode_beet.o
     171       40       0      211   net/ipv4/xfrm4_mode_transport.o
    1163       40       0     1203   net/ipv4/xfrm4_mode_tunnel.o
    1083       52       0     1135   net/ipv6/xfrm6_mode_beet.o
     172       40       0      212   net/ipv6/xfrm6_mode_ro.o
     172       40       0      212   net/ipv6/xfrm6_mode_transport.o
    1056       40       0     1096   net/ipv6/xfrm6_mode_tunnel.o
15730424  6937008 4046908 26714340   vmlinux

Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

There are only two versions (tunnel and transport). The ip/ipv6 versions
are only differ in sizeof(iphdr) vs ipv6hdr.

Place this in the core and use x->outer_mode->encap type to call the
correct adjustment helper.

Before:
   text   data    bss     dec      filename
15730311  6937008 4046908 26714227 vmlinux

After:
15730428  6937008 4046908 26714344 vmlinux

(about 117 byte increase)

v2: use family from x->outer_mode, not inner

Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

Same is input indirection.  Only exception: we need to export
xfrm_outer_mode_output for pktgen.

Increases size of vmlinux by about 163 byte:
Before:
   text    data     bss     dec      filename
15730208  6936948 4046908 26714064   vmlinux

After:
15730311  6937008 4046908 26714227   vmlinux

xfrm_inner_extract_output has no more external callers, make it static.

v2: add IS_ENABLED(IPV6) guard in xfrm6_prepare_output
    add two missing breaks in xfrm_outer_mode_output (Sabrina Dubroca)
    add WARN_ON_ONCE for 'call AF_INET6 related output function, but
    CONFIG_IPV6=n' case.
    make xfrm_inner_extract_output static

Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

No need for any indirection or abstraction here, both functions
are pretty much the same and quite small, they also have no external
dependencies.

xfrm_prepare_input can then be made static.

With allmodconfig build, size increase of vmlinux is 25 byte:

Before:
   text   data     bss     dec      filename
15730207  6936924 4046908 26714039  vmlinux

After:
15730208  6936948 4046908 26714064 vmlinux

v2: Fix INET_XFRM_MODE_TRANSPORT name in is-enabled test (Sabrina Dubroca)
    change copied comment to refer to transport and network header,
    not skb->{h,nh}, which don't exist anymore. (Sabrina)
    make xfrm_prepare_input static (Eyal Birger)

Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

Now that we have the family available directly in the
xfrm_mode struct, we can use that and avoid one extra dereference.

Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

This will be useful to know if we're supposed to decode ipv4 or ipv6.

While at it, make the unregister function return void, all module_exit
functions did just BUG(); there is never a point in doing error checks
if there is no way to handle such error.

Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

The ipip tunnel introduced in commit dd9ee344

 ("vti4: Fix a ipip
packet processing bug in 'IPCOMP' virtual tunnel") largely duplicated
the existing vti_input and vti_recv functions.  Refactored to
deduplicate the common code.

Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

This patch introduces support for gso partial ESP offload.

Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Raed Salem <raeds@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

tcp_clock_ns() (aka ktime_get_ns()) is using monotonic clock,
so the checks we had in tcp_mstamp_refresh() are no longer
relevant.

This patch removes cpu stall (when the cache line is not hot)

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The tristate prompt should have been replaced rather than defined a few
lines below, rebase mistake.

Fixes: 17cc9821

 ("net: phy: Move Omega PHY entry to Cygnus PHY driver")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since maxattr is common, the policy can't really differ sanely,
so make it common as well.

The only user that did in fact manage to make a non-common policy
is taskstats, which has to be really careful about it (since it's
still using a common maxattr!). This is no longer supported, but
we can fake it using pre_doit.

This reduces the size of e.g. nl80211.o (which has lots of commands):

   text	   data	    bss	    dec	    hex	filename
 398745	  14323	   2240	 415308	  6564c	net/wireless/nl80211.o (before)
 397913	  14331	   2240	 414484	  65314	net/wireless/nl80211.o (after)
--------------------------------
   -832      +8       0    -824

Which is obviously just 8 bytes for each command, and an added 8
bytes for the new policy pointer. I'm not sure why the ops list is
counted as .text though.

Most of the code transformations were done using the following spatch:
    @ops@
    identifier OPS;
    expression POLICY;
    @@
    struct genl_ops OPS[] = {
    ...,
     {
    -	.policy = POLICY,
     },
    ...
    };

    @@
    identifier ops.OPS;
    expression ops.POLICY;
    identifier fam;
    expression M;
    @@
    struct genl_family fam = {
            .ops = OPS,
            .maxattr = M,
    +       .policy = POLICY,
            ...
    };

This also gets rid of devlink_nl_cmd_region_read_dumpit() accessing
the cb->data as ops, which we want to change in a later genl patch.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace the call to netif_wake_queue in rtl8169_start_xmit with
netif_start_queue as we don't need to actually wake up the queue since
we are still in mid transmit so we just need to reset the bit so it
doesn't prevent the next transmit.
(Description shamelessly copied from a mail sent by Alex.)

Suggested-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Aquantia PHY's of the AQR107 family support the downshift feature.
Add support for it as standard PHY tunable so that it can be controlled
via ethtool.
The AQCS109 supports a proprietary 2-pair 1Gbps mode. If two such PHY's
are connected to each other with a 2-pair cable, they may not be able
to establish a link if both advertise modes > 1Gbps.

v2:
- add downshift event detection
- warn if downshift occurred
- read downshifted rate from vendor register
- enable downshift per default on all AQR107 family members

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vlad Buslov says:

====================
Refactor flower classifier to remove dependency on rtnl lock

Currently, all netlink protocol handlers for updating rules, actions and
qdiscs are protected with single global rtnl lock which removes any
possibility for parallelism. This patch set is a third step to remove
rtnl lock dependency from TC rules update path.

Recently, new rtnl registration flag RTNL_FLAG_DOIT_UNLOCKED was added.
TC rule update handlers (RTM_NEWTFILTER, RTM_DELTFILTER, etc.) are
already registered with this flag and only take rtnl lock when qdisc or
classifier requires it. Classifiers can indicate that their ops
callbacks don't require caller to hold rtnl lock by setting the
TCF_PROTO_OPS_DOIT_UNLOCKED flag. The goal of this change is to refactor
flower classifier to support unlocked execution and register it with
unlocked flag.

This patch set implements following changes to make flower classifier
concurrency-safe:

- Implement reference counting for individual filters. Change fl_get to
  take reference to filter. Implement tp->ops->put callback that was
  introduced in cls API patch set to release reference to flower filter.

- Use tp->lock spinlock to protect internal classifier data structures
  from concurrent modification.

- Handle concurrent tcf proto deletion by returning EAGAIN, which will
  cause cls API to retry and create new proto instance or return error
  to the user (depending on message type).

- Handle concurrent insertion of filter with same priority and handle by
  returning EAGAIN, which will cause cls API to lookup filter again and
  process it accordingly to netlink message flags.

- Extend flower mask with reference counting and protect masks list with
  masks_lock spinlock.

- Prevent concurrent mask insertion by inserting temporary value to
  masks hash table. This is necessary because mask initialization is a
  sleeping operation and cannot be done while holding tp->lock.

Both chain level and classifier level conflicts are resolved by
returning -EAGAIN to cls API that results restart of whole operation.
This retry mechanism is a result of fine-grained locking approach used
in this and previous changes in series and is necessary to allow
concurrent updates on same chain instance. Alternative approach would be
to lock the whole chain while updating filters on any of child tp's,
adding and removing classifier instances from the chain. However, since
most CPU-intensive parts of filter update code are specifically in
classifier code and its dependencies (extensions and hw offloads), such
approach would negate most of the gains introduced by this change and
previous changes in the series when updating same chain instance.

Tcf hw offloads API is not changed by this patch set and still requires
caller to hold rtnl lock. Refactored flower classifier tracks rtnl lock
state by means of 'rtnl_held' flag provided by cls API and obtains the
lock before calling hw offloads. Following patch set will lift this
restriction and refactor cls hw offloads API to support unlocked
execution.

With these changes flower classifier is safely registered with
TCF_PROTO_OPS_DOIT_UNLOCKED flag in last patch.

Changes from V2 to V3:
- Rebase on latest net-next

Changes from V1 to V2:
- Extend cover letter with explanation about retry mechanism.
- Rebase on current net-next.
- Patch 1:
  - Use rcu_dereference_raw() for tp->root dereference.
  - Update comment in fl_head_dereference().
- Patch 2:
  - Remove redundant check in fl_change error handling code.
  - Add empty line between error check and new handle assignment.
- Patch 3:
  - Refactor loop in fl_get_next_filter() to improve readability.
- Patch 4:
  - Refactor __fl_delete() to improve readability.
- Patch 6:
  - Fix comment in fl_check_assign_mask().
- Patch 9:
  - Extend commit message.
  - Fix error code in comment.
- Patch 11:
  - Fix fl_hw_replace_filter() to always release rtnl lock in error
    handlers.
- Patch 12:
  - Don't take rtnl lock before calling __fl_destroy_filter() in
    workqueue context.
  - Extend commit message with explanation why flower still takes rtnl
    lock before calling hardware offloads API.

Github: <https://github.com/vbuslov/linux/tree/unlocked-flower-cong3

>
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Set TCF_PROTO_OPS_DOIT_UNLOCKED for flower classifier to indicate that its
ops callbacks don't require caller to hold rtnl lock. Don't take rtnl lock
in fl_destroy_filter_work() that is executed on workqueue instead of being
called by cls API and is not affected by setting
TCF_PROTO_OPS_DOIT_UNLOCKED. Rtnl mutex is still manually taken by flower
classifier before calling hardware offloads API that has not been updated
for unlocked execution.

Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use 'rtnl_held' flag to track if caller holds rtnl lock. Propagate the flag
to internal functions that need to know rtnl lock state. Take rtnl lock
before calling tcf APIs that require it (hw offload, bind filter, etc.).

Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

struct tcf_proto was extended with spinlock to be used by classifiers
instead of global rtnl lock. Use it to protect shared flower classifier
data structures (handle_idr, mask hashtable and list) and fields of
individual filters that can be accessed concurrently. This patch set uses
tcf_proto->lock as per instance lock that protects all filters on
tcf_proto.

Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Without rtnl lock protection tcf proto can be deleted concurrently. Check
tcf proto 'deleting' flag after taking tcf spinlock to verify that no
concurrent deletion is in progress. Return EAGAIN error if concurrent
deletion detected, which will cause caller to retry and possibly create new
instance of tcf proto.

Retry mechanism is a result of fine-grained locking approach used in this
and previous changes in series and is necessary to allow concurrent updates
on same chain instance. Alternative approach would be to lock the whole
chain while updating filters on any of child tp's, adding and removing
classifier instances from the chain. However, since most CPU-intensive
parts of filter update code are specifically in classifier code and its
dependencies (extensions and hw offloads), such approach would negate most
of the gains introduced by this change and previous changes in the series
when updating same chain instance.

Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Check if user specified a handle and another filter with the same handle
was inserted concurrently. Return EAGAIN to retry filter processing (in
case it is an overwrite request).

Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Protect modifications of flower masks list with spinlock to remove
dependency on rtnl lock and allow concurrent access.

Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Without rtnl lock protection masks with same key can be inserted
concurrently. Insert temporary mask with reference count zero to masks
hashtable. This will cause any concurrent modifications to retry.

Wait for rcu grace period to complete after removing temporary mask from
masks hashtable to accommodate concurrent readers.

Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Suggested-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extend fl_flow_mask structure with reference counter to allow parallel
modification without relying on rtnl lock. Use rcu read lock to safely
lookup mask and increment reference counter in order to accommodate
concurrent deletes.

Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to prevent double deletion of filter by concurrent tasks when rtnl
lock is not used for synchronization, add 'deleted' filter field. Check
value of this field when modifying filters and return error if concurrent
deletion is detected.

Refactor __fl_delete() to accept pointer to 'last' boolean as argument,
and return error code as function return value instead. This is necessary
to signal concurrent filter delete to caller.

Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extend flower filters with reference counting in order to remove dependency
on rtnl lock in flower ops and allow to modify filters concurrently.
Reference to flower filter can be taken/released concurrently as soon as it
is marked as 'unlocked' by last patch in this series. Use atomic reference
counter type to make concurrent modifications safe.

Always take reference to flower filter while working with it:
- Modify fl_get() to take reference to filter.
- Implement tp->put() callback as fl_put() function to allow cls API to
release reference taken by fl_get().
- Modify fl_change() to assume that caller holds reference to fold and take
reference to fnew.
- Take reference to filter while using it in fl_walk().

Implement helper functions to get/put filter reference counter.

Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As a preparation for using classifier spinlock instead of relying on
external rtnl lock, rearrange code in fl_change. The goal is to group the
code which changes classifier state in single block in order to allow
following commits in this set to protect it from parallel modification with
tp->lock. Data structures that require tp->lock protection are mask
hashtable and filters list, and classifier handle_idr.

fl_hw_replace_filter() is a sleeping function and cannot be called while
holding a spinlock. In order to execute all sequence of changes to shared
classifier data structures atomically, call fl_hw_replace_filter() before
modifying them.

Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Flower classifier only changes root pointer during init and destroy. Cls
API implements reference counting for tcf_proto, so there is no danger of
concurrent access to tp when it is being destroyed, even without protection
provided by rtnl lock.

Implement new function fl_head_dereference() to dereference tp->root
without checking for rtnl lock. Use it in all flower function that obtain
head pointer instead of rtnl_dereference().

Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

NFP driver ABI contains bits for L2 switching which were never
implemented in initially envisioned form.

Remove the defines, and open up the possibility of
reclaiming the bits for other uses.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

NeilBrown says:

====================
Two clean-ups for rhashtable.

These two patches make small improvements to
rhashtable, but are otherwise unrelated.

Thanks to Herbert, Miguel, and Paul for the review.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

The pattern set by list.h is that for_each..continue()
iterators start at the next entry after the given one,
while for_each..from() iterators start at the given
entry.

The rht_for_each*continue() iterators are documented as though the
start at the 'next' entry, but actually start at the given entry,
and they are used expecting that behaviour.
So fix the documentation and change the names to *from for consistency
with list.h

Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rhashtable_try_insert() currently holds a lock on the bucket in
the first table, while also locking buckets in subsequent tables.
This is unnecessary and looks like a hold-over from some earlier
version of the implementation.

As insert and remove always lock a bucket in each table in turn, and
as insert only inserts in the final table, there cannot be any races
that are not covered by simply locking a bucket in each table in turn.

When an insert call reaches that last table it can be sure that there
is no matchinf entry in any other table as it has searched them all, and
insertion never happens anywhere but in the last table.  The fact that
code tests for the existence of future_tbl while holding a lock on
the relevant bucket ensures that two threads inserting the same key
will make compatible decisions about which is the "last" table.

This simplifies the code and allows the ->rehash field to be
discarded.

We still need a way to ensure that a dead bucket_table is never
re-linked by rhashtable_walk_stop().  This can be achieved by calling
call_rcu() inside the locked region, and checking with
rcu_head_after_call_rcu() in rhashtable_walk_stop() to see if the
bucket table is empty and dead.

Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: phy: Move Omega PHY entry to Cygnus PHY driver

In order to pave the way for adding some specific Omega PHY features
that may not be desirable on other products covered by the bcm7xxx PHY
driver, split the Omega PHY entry into the Cygnus PHY driver such that
the PHY drivers are reflective of product lines/business units
maintaining them within Broadcom.

No functional changes intended.
====================

Acked-by: Arun Parameswaran <arun.parameswaran@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>